Top » Catalog » Hardware » Adhesives/Resin/Epoxy » Epoxy » Epoxy R-G » R1001352

165.00EUR

Epoxy L 40 min. 10 kg (Resin)
[R1001352]

Epoxy L 40 min. 10 kg (Resin)

General information about the system Epoxy Resin L with different hardeners

Low viscosity, free of solvents and fillers
Fast impregnation of glass, aramid, and carbon fibres
High static and dynamic strength
Epoxy Resin L with the corresponding hardeners is the most commonly used laminating and adhesive resin in the R&G delivery programme.

In conjunction with the Hardeners S (15 minutes), L (40 minutes), CL (60 minutes), EPH 500 (60 minutes), EPH 161 (90 minutes), W 300 (300 minutes), GL 1 (30 minutes) and GL 2 (210 minutes), this epoxy resin exhibits similar mechanical properties to those of the laminating systems usual aerospace .Its heat deflection temperature reaches from 60 °C (S, L, EPH 500, W 300), to 80 °C (GL 1 and GL 2, after post-curing), to 95 °C (CL, after post-curing) and finally to 120 °C (EPH 161, after post-curing).

Epoxy Resin L has a low viscosity, is free of solvents and fillers, and ideal for impregnating glass, aramid, and carbon fibres. Its low surface tension, good adhesion, and minimal curing shrinkage makes it ideal for bonding wood, metal, foamed polystyrene, etc. It can be processed in all of the customary methods, e.g. hand lay-up operations, pressure and vacuum impregnation, press moulding, winding, etc.

The well-proven R&G Epoxy Resin L in combination with Hardeners GL 1 and GL 2 offer an approval by the Germanische Lloyd for the construction of boats and rotor blades for wind turbines.
Expertise for the resin systems Epoxy Resin L + Hardener S, Epoxy Resin L + Hardener L, Epoxy Resin L + Hardener CL and Epoxy Resin L + Hardener EPH 500: these are not cytotoxic (cell damaging), important for applications in medical purposes.
Laminate structures for vehicle construction in combination with Hardener EPH 161 are approved by the TÜV-Süd (Document available in german language only).

under request

Reviews

Customers who bought this product also purchased

Silicon black 2,5 qmm cable ( 25 m) under request	Connectors MPX male under request	Check valve V2 under request
Silicone 0,35 qmm servos wire Futaba (100 m) under request	Silicone black 6,0 qmm wire (25 m) under request	Connectors MPX female under request

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->

  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
    Cianocrylate->
    Epoxy->
      EMC-Vega
      KAVAN
      Loctite
      Resoltech
      Epoxy BSI
      Epoxy R-G
    Resin/Gelcoat
    Glass Bubbles
    Contact adhesive
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

Combo KAVAN C3536-1250 + KAVANA R50SB +
59.00EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (10 pcs)
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x4.0 mm (5 pcs)
1 x	Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 100M
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 100 m
1 x	Fibra carbono 3k tela 160g/m2 100 cm x 5m
1 x	Carbon Non-Woven, 160 g/m² 100 cm 5m
1 x	Carbon Non-Woven, 160 g/m² 127 cm 5m
1 x	Carbon fibre tape 200 g/m² (unidirectional) 50 mm
1 x	Glass fabric tape 225 g/m² (Silane, plain) 40 mm X 100m
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x6.0 mm (5 pcs)
1 x	Carbon Non-Woven, 160 g/m² 100 cm 25 m
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 50 m
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (5 pcs)
1 x	Glass fabric tape 49 g/m² (Interglas 02037, finish FE 600/800, p
1 x	Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m
1 x	Carbon fabric 160 g/m² (twill weave) 127 cm, roll/ 10 m
1 x	Glass fabric tape 225 g/m² (Silane, plain) 40 mm
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 20 m
1 x	Pin type hinge Al 4,5x70 mm (2 pcs)
1 x	Small pinned hinge (12 uds)
1 x	Pin type hinge Al 6x98 mm (2 pcs)
1 x	Long pinned hinge (12 uds)
1 x	Pin type hinge Al 3,0x50 mm demount (2 pcs)
1 x	33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs)
1 x	76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
1 x	67 mm cylidric hinge Ø 5 mm (4 pcs)
1 x	67 mm cylidric hinge Ø 4,5 mm (5 pcs)
2 x	Flap hinge 33x9 mm (6 pcs)
1 x	Gates hinge 30x16 mm (2 pcs)
1 x	Aluminum Bayonet / strongal D12 mm / 0.5 m
2 x	15 mm reinforced hinge
2 x	43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs)
2 x	Gates hinge aluminium (1 pcs)
1 x	Wing-connector: Glass / Carbon tube (26.5/25 x 25/23) x 1000 mm
1 x	Nylon hinge 20x20x0,3 (10 pcs)
1 x	Cylidric hinge 43 mm Ø 2,5 mm (5 pcs)
1 x	Gates hinge
1 x	Wing-connector: Glass / Carbon tube (13.7/12.5) x 1000 mm
1 x	Pin type hinge Al 3,0x50 mm (2 pcs)
2 x	48 x 10 mm cylidric hinge Ø 3,0 mm (10 pcs)
1 x	Miniature brass strap hinge, 1 m
1 x	67 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
1 x	Large flex hinge (12 uds)
1 x	Micro flex hinge (12 uds)
1 x	48 mm cylidric hinge Ø 2,5 mm (5 pcs)
1 x	Nylon hinge 20x15x0,3 (10 pcs)
1 x	Hard aluminium thin-walled tube with fibreglass case ø30x1mm, 1m
1 x	Round Rod 2,5x1000 mm
1 x	Strip 2,5x1,25x330 mm
1 x	ABS I Strip 20x10x1000 mm
1 x	Strip 1,5x1,5x330 mm
2 x	ABS Strip 1.0x3.0x1000 mm
1 x	Strip 3,5x1,75x330 mm
1 x	ABS Strip 1.5x8.0x1000 mm
1 x	Strip ABS 2.0x8.0x1000 mm
1 x	ABS Strip 1.0x5.0x1000 mm
1 x	Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm)
1 x	30 cm BEC cable (male)
1 x	Futaba External voltage input cable Futaba CA-RVIN-700
1 x	3 copper lacquer wire Ø0,2 mm (1 m)
1 x	MPX-Dean "T" Adapter
2 x	DUPLEX USBa USB-Adapter for Jeti Duplex Items
1 x	CC 02
1 x	Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm)
1 x	CC 05
1 x	Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH
1 x	"Y" charging 4mm wire (2 IN-1 OUT).
1 x	TP/TopFuel - XH 2/3S Adapter
1 x	CM-3
2 x	JETImodel SINGLE BEC
1 x	Bec MR UBEC 5A (5v/6v/7v)
1 x	5 LiPo XH>EH adapter
1 x	Cabel charger transmitter GRAUPNER
1 x	BEC 3A FOXY
1 x	Silicone 0,14 qmm servos wire Graupner (100 m)
1 x	Silicone 0,14 qmm servos wire Graupner (5 m)
1 x	Silicone 0,25 qmm servos wire Graupner (5 m)
1 x	Silicone 0,50 qmm servos wire Futaba (100 m)
1 x	PVC 0,08 qmm Graupner servos wire (5 m)
1 x	Cable Cargador FUTABA
1 x	Cable servo PREMIUM MAXI 50m (blanco/rojo/azul) PVC
1 x	100m servo "Premium" wire (white/red/blue)
1 x	Silicone red 0,25 mm² wire (25 m)
1 x	Cable servo PREMIUM MAXI 1 m (blanco/rojo/azul) PVC
1 x	PVC 0,14 qmm servos wire Graupner (100 m)
1 x	Silicone 0,35 qmm servos wire Graupner(100 m)
1 x	White silicone 0,25 qmm wire (100 m)
1 x	Cable servo PREMIUM MAXI 10m (blanco/rojo/azul) PVC
1 x	Silicone 0,35 qmm servos wire Futaba (100 m)
1 x	PVC 0,08 qmm Futaba servos wire (5 m)
1 x	Cable servo PREMIUM MAXI 100m (blanco/rojo/azul) PVC
1 x	PVC 0,14 qmm servos wire Hitec/Mpx (5 m)
1 x	Cabel PVC 2 x 0.25 mm2 (5 m) red-black
1 x	Silicone 0,25 qmm servos wire Graupner (100 m)
1 x	JR silicone servo wire 0,35 qmm / 5m
1 x	5 line servos wire black (1 m)
1 x	Cable servo PREMIUM 1 m (blanco/rojo/negro) AWG21 + AWG26 TPE
1 x	White silicone 0,25 mm² wire (25 m)
1 x	4" - 102 x 45 mm Ø5 mm aluminium core wheel
1 x	Wheel FEMA 127 mm / 6 mm
1 x	Wheel 75 mm with electromagnet and brake disk (2 uds)
1 x	102x26 Ø6.0 mm aluminium core wheel
1 x	Wheel FEMA 82 mm / 5 mm
1 x	127x43 Ø6.0 mm aluminium core wheel
1 x	Foam wheel Ø 38 mm (2 pcs)
1 x	Wheel FEMA 100 mm / 6 mm
1 x	Super Light Wheels(Sponge Tyre) Ø 55mm x 19mm (2pcs) axis Ø 3.5m
1 x	Wheel 22 mm
1 x	Nose wheel 62 mm
1 x	20 mm tail wheel for 0,5-1 Kg models
1 x	Wheel Ø 75 mm (1 ud) Electron Retracts
1 x	Wheel FEMA 70 mm / 5 mm
1 x	Wheel Ø 90 mm (1 ud) Electron Retracts
1 x	Wheel 115 mm with electromagnet and brake disk + E-Brake (2 uds)
1 x	Foam wheel Ø 351 mm (2 pcs)
1 x	69x25 mm (2.75") axle Ø4 mm aluminium core wheel
1 x	Wheel 115 mm with electromagnet and brake disk (2 uds)
1 x	Wheel FEMA 152 mm / 8 mm
1 x	Kwik link AL M2,5 L:23 mm (2 pcs) + Pin Ø 1,6 mm
1 x	Steering arm 12 mm Ø 4 mm (2 uds)
1 x	1/6 Pilot "John"
1 x	Threaded coupler ALU M2,5 Ø 4 (2 uds)
1 x	A/C quality beech plywood 1520x750x3.0 mm
1 x	ABS tube 6.0x5.0x1000 mm
1 x	Teflon rollers 80 mm x 15 mm Diam.
1 x	Glass fabric 49 g/m² (Finish FE 800, plain) 110 cm x 20m
1 x	ROBART POINT HINGE 4,7mm (5 pcs)
1 x	Strip 2,0x2,0x330 mm
1 x	Strip ABS 2.0x3.0x1000 mm
1 x	Nylon hinge 15x0,3 (10 pcs)
1 x	18 mm reinforced hinge
2 x	ABS Strip 1.5x6.0x1000 mm
1 x	Fast'n EZ-CA-Hinge (12 uds)
1 x	Round Rod 2,0x1000 mm
1 x	Round Rod 3,0x1000 mm
1 x	Round Rod 1,25x1000 mm
1 x	Pin hinge 26x11 mm (10 uds)
1 x	Nylon hinge for flaps/gates 27x10,5 (2 pcs)
1 x	ABS Strip 1.5x3.0x1000 mm
1 x	Black silicone 0,25 mm² wire (25 m)
1 x	MAX BEC 2
1 x	Interruptor SPS 70v 60/120A
1 x	Magnetic Interruptor MULTIPLEX
1 x	Carbon roving DowAksa / 24k / 1600 tex
1 x	Extension 2/3 lipos JST/C
1 x	FX three-position switched channel, long
1 x	Rubber wheel Ø 38mm x 13mm (2pcs) axis Ø 2.1mm
1 x	44.5x17 mm (1.75") Type jets aluminium core wheel
1 x	Lightweight aircraft wheel, 45x18.5x2
1 x	35x14 mm hard foam KOVO wheel (2 pcs)
1 x	Superlight deluxe wheel 68 mm (2 pcs)
1 x	wing/fuselage connector for 12 pines AWG 20-24
1 x	Male Prolonger TP 4/5S
1 x	Female prolonguer XH 30 cm 6 cell cable of silicone 0,25 mm
1 x	Female connector for 16 pines AWG
1 x	TrainerCord (master-learner)
1 x	SPARK Switch 7.4v
1 x	wing/fuselage connector for 16 pines AWG 20-24
1 x	Opto Gas Engine Kill Switch
1 x	Short Switch On/Off micro
1 x	Switc electronic 30 Amp
1 x	Servo slow down unit (0,7-14,7 sec )
1 x	SPS 70V 140/280 A
1 x	USB Interface REVOLECTRIX for CellPRO 10s
1 x	SBEC 30 D
1 x	SPARK Switch 5.9v
1 x	wing/fuselage connector for 3 pines AWG 20-24
1 x	PWC6 PowerWingConnector for 6 servos with fuselage socket
1 x	Pin type hinge Al 4,5x70 mm demount (2 pcs)
1 x	XH 30 cm Female extension 0,25 mm2 silicone cable for 4 cell
2 x	Fiberglass heat shield Ø 4 mm 1000 mm
1 x	XH 30 cm Female extension 0,25 mm2 silicone cable for 5 cell
1 x	Silicone black 2,5 qmm wire ( 1 m)
1 x	Gyro 3-Ejes REFLEX V2 FMS
1 x	Receiver replacement antenna, approx. 15
1 x	Propeller Pleg CAM-Prop 10x6 + Spinner
1 x	40,0 mm hydro-propeller (left hydropropeller)
1 x	POLARON EX 800w charger
1 x	Flap hinge (6 pcs)
1 x	Decorative caps, multicoloured, short
1 x	Propeller Pleg CAM-Prop 8x6
1 x	Beech dowels 2.0 x 1000 mm
1 x	Transmitter Crystal 35 Mc/s Ch 62
1 x	Spinner fixed propeller 60 mm / 5,0 mm
1 x	Fiberglass 163 g/m² 1m x 20 m (Aero, finish FK 144, plain)
1 x	Carbon Non-Woven, 160 g/m² 127 cm 1 m
1 x	Carbon Non-crimp ST 200 g/m² 50 cm x 20 m
1 x	Carbon plate 1000x500x2,0 mm ECOTECH
1 x	Chopped glass fibre strands 0.2 mm
1 x	Carbon Non-Woven, 240 g/m² 100 cm x 20 m
1 x	Carbon plate 550x350x1.0 mm ECOTECH
1 x	Colormatic 2K Soft fine putty white, 1 kg
1 x	Carbon plate 350x150x5.0 mm
1 x	Silicone red 1,5 qmm wire ( 1 m)

8,551.78EUR