3 x | 165 mm PVC transparent battery termo-retract 165 mm (10 m) |
3 x | Oracover Black 2 m |
3 x | 68 mm PVC transparent battery termo-retract 68 mm (1 m) |
3 x | Oracover CARBON Metalic 1 m |
2 x | 6,4x1000 mm 2:1 green termoretract tube |
3 x | 13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
4 x | 5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
2 x | Ring 320 mm length (5 pcs) |
3 x | Connectors banna oro 2 mm (M/F) (ultralight) |
5 x | Connectors banna oro 3,5 mm (M/F) |
2 x | 13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
3 x | 10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
3 x | Spikes Band (5 m) |
3 x | Connectors banna oro 4 mm (M/F) |
3 x | Marker ties (20 pcs) |
3 x | Pad self adhesive, up to 3mm / 0.12″, (10 pcs) |
4 x | 26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
1 x | Connectors banna oro 8,0 mm (M/F) |
2 x | Conector FUTABA Servo female BLUE silicon (10 pcs) |
3 x | 2 mm male connector (2 pcs) with safety connector |
1 x | Tape GFK 50 mm |
4 x | SE Ring 450 mm (2 pcs) |
2 x | Conector BEC female (10 pcs) |
2 x | Bag connector 2 mm |
4 x | 14x60 mm Mini rings Tie Wraps (4 pcs) |
2 x | Connectors DEANS (T) |
2 x | Connectors banna oro 6,0 mm (M/F) |
6 x | 20x200 mm battery rings |
2 x | 30 cm MULTIPLEX female connector |
4 x | Tape GFK 25 mm |
5 x | Macchi MC72 50E RED/GOLD |
2 x | 2 mm female connector (2 pcs) with safety connector |
3 x | Canadair CL-415 (aero-naut) |
2 x | Connectors banana oro 6,0 mm Ultralight (M/F) |
1 x | Connectors DEANS (T) micro |
5 x | Fox MDM 1 4000 mm Std. |
6 x | LS-8 GFK 6m Glider |
4 x | Kobuz 5000 mm (Airwold) |
4 x | Surprise XII Rudder (Freudenthaler) |
4 x | Surprise XII Horizontal Estabilizer (Freudenthaler) |
2 x | Locking cable tie 2.5x100 (uds) |
3 x | Paramotor BackPack XXS (without accessories) |
2 x | Black large kwik link (10 pcs) |
1 x | Extension PVC 150 cm (Graupner) |
2 x | 170x54 mm SLH KOVO wheel with bearing and metal hub |
5 x | Joint with bearing M3 22x5,5 |
2 x | Long pinned hinge (12 uds) |
4 x | Tow hook for tug |
4 x | Canopy Sweet / Siesta |
2 x | Anodized aluminium servo M4x5/8 screw (4 lilac pcs) |
3 x | 100x50 mm SLH KOVO wheel |
4 x | Angle of incidence meter |
2 x | Cable silicona macho batt. receptor 30 cm (Graupner) |
3 x | Monokote ROJO misil (1.8x0.65m) |
2 x | Blue smoke canister 100 g |
2 x | Aluminium cap bolt washer M3 blue (8 pcs) |
3 x | Oracover Azul Cielo 2 m |
1 x | Green smoke canister 65 g |
6 x | Ball link duraluminium M3 V1 (10 pcs) |
1 x | Long pinned hinge (6 uds) |
3 x | Steering arm 12 mm Ø 4 mm (2 uds) |
2 x | Nylon hinge 15x0,3 (10 pcs) |
2 x | Small pinned hinge (6 uds) |
2 x | 110x55 mm C SLH KOVO wheel |
1 x | Anodized aluminium servo M4x5/8 screw (4 blue pcs) |
2 x | Civilian pilot "G-Man" size 9cm (Slimline) |
3 x | 67 mm cylidric hinge Ø 5 mm (4 pcs) |
3 x | X-RAY Micro QR (Rudder) |
2 x | Piloto Jet "Red" 1/6 Scale |
4 x | Para-RC "RC-Evo-Cross" Rescue |
3 x | Parachutist |
2 x | 25 mm reinforced hinge |
4 x | Ply-Span 450x600/13g Black |
2 x | Pilot "Dick" Legends Series (Slimline) |
2 x | BU 131 Jugmann ARC |
3 x | Tube Pitot to PIXHAWK |
5 x | Long ball link M2 (6 uds) |
1 x | Propeller balancer |
4 x | Blue smoke canister 140 g |
2 x | SAGITA Alsema 4.0 m |
1 x | Aluminium wide washer M4 Black (4 pcs) |
2 x | Glases Moritz |
1 x | Fiberglass motor-holder for electric motors |
3 x | 1/6 Pilot "Buddy" |
2 x | Aluminium wide washer M4 Red (4 pcs) |
1 x | 38 mm Alu spinner 5 mm pleg. propeller |
2 x | Medidor ángulos y/o incidencias |
3 x | Initior Receiver FRX2 Wireless |
2 x | 1/4 Pilot "Heidi" |
3 x | AX-60 starters (5 pcs) |
2 x | 18m Fitting barb |
1 x | Anodized alum. M4x0,7x25 mm Button Head screw (4 blue pcs) |
4 x | Carbon Non-crimp ST 200 g/m² 50 cm x 5 m |
1 x | Steering arm 16 mm Ø 4 mm |
1 x | White smoke canister 140 g |
5 x | Fixed launching hook |
3 x | 1/12 Pilot "Langley" |
2 x | Vertical cockpit anchor "tipe F3A" (2 pcs) |
2 x | Bidule 170 ARF 3.48 m |
2 x | Canopy Lock V1 M3 Blue (2 pcs) |
3 x | White smoke bombs AX-9 (10 pcs) |
2 x | SHK 4000 mm Scale 1:4.25, V-Tails |
2 x | 11 mm wing servo holder |
1 x | Pilot "Ice Man" (Slimline) |
4 x | ACTIVE ARF Electric 1.995 mm |
3 x | BU 131 Jugmann Panel Instrum. frontal |
2 x | Aluminium wide washer M4 Gold (4 pcs) |
1 x | Bidule 111 3000 mm Canopy |
2 x | 33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs) |
2 x | Remote electric ignition system |
2 x | 1/4 Pilot "Mike" |
2 x | Ply-Span 450x600/13g White |
1 x | Gates hinge 30x16 mm (2 pcs) |
3 x | BULLIT Wing 840 mm |
3 x | Green smoke canister 100 g |
2 x | 18 mm wing servo holder |
3 x | Aluminium cap bolt washer M4 green (8 pcs) |
3 x | Oratex White 2m |
2 x | Cable coupler M3 (10 uds) |
3 x | Civilian pilot "Gramps" size 9cm (Slimline) |
2 x | DLE Ignition 111/120/170 |
3 x | ORACOVER Ferrari red (2 m) |
1 x | UMX™ Whipit™ DLG BNF Basic (E-flite) |
2 x | Red smoke bombs AX-60 (5 pcs) |
2 x | Aluminium cap bolt washer M3 black (8 pcs) |
3 x | 1/10 Pilot "Jack" |
2 x | Zurich Sport Sunglasse Dark Sensity BROWN Glasses |
4 x | Stainless steel cable Ø 0.5 mm (2 m) |
3 x | Anodized aluminium M4x0,7x20 mm screw (4 blue pcs) |
1 x | Blind nut M4 (4 pcs) |
2 x | BABY glider drawings (Aero-naut) |
1 x | Ø 38 mm fiberglass motor-holder for electric motors |
3 x | Anodized alum. M4x0,7x20 mm Flat Head screw (4 lilac pcs) |
2 x | CRACK YAK (Mini) 600 mm |
3 x | 1/6 Pilot "John" |
1 x | Bidule 55 V3 2460 mm |
2 x | Electric rocket starters (6 pcs) |
2 x | Motor Set CHALLENGER Indoor |
4 x | Ball link M3 (10 pcs, flat ball) |
2 x | CF tube (L 1000 mm Ø030 mm, Ø26 mm) |
5 x | ORACOVER transparent Yellow (10 m) |
1 x | ORACOVER Fluor red (2 m) |
3 x | CHALLENGER Indoor |
3 x | Extinguisher CO2 - 2 Kg |
2 x | BU 131 Jugmann Panel Instrum. trasero |
3 x | Oracover Orange 2 m |
2 x | Pin type hinge Al 4,5x70 mm to wire (2 pcs) |
4 x | Kwik link AL M3 con Clip (2 pcs) |
1 x | TeXtreme® Carbon tape 38 g/m² (IM, unidirectional) 20 mm x 100m |
2 x | Fast'n EZ-CA-Hinge, lite (12 uds) |
5 x | Set of buckles and strap, 1:4 scale. |
2 x | M3 Maxi ball link (2 uds) |
2 x | Surface Indicator Gauge Small |
3 x | Short ball link M3 (6 uds) |
2 x | 1/10 Pilot "Jimmy" |
3 x | 1/12 Pilot "Fighter" |
3 x | Crimping sleeves for cable 0.70 mm (10 pcs) |
1 x | Cable coupler M2,5 (2 pcs) |
2 x | Carbon Non-Woven, 160 g/m² 127 cm 5m |
2 x | Anodized aluminium servo M4x5/8 screw (4 black pcs) |
2 x | Kwik link AL Ø2 mm L:23 mm (2 pcs) + Pin Ø 1,6 mm |
5 x | Ventral support for AX-18/AX-60 |
6 x | Kwik link AL M4 con Clip (2 pcs) |
3 x | M2 5Diam short black ball link V2 (2 pcs) |
2 x | Screw-lock pushrod conn snap Ø 1.5 mm (2 uds) |
3 x | 15 mm reinforced hinge |
2 x | Xplorer3 anemometro |
4 x | Parachute P4 |
2 x | Neck strap JETI DS |
4 x | Cable coupler M2 (10 uds) |
2 x | Carbon Non-crimp ST 200 g/m² 50 cm x 10 m |
2 x | Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m |
1 x | DYNAMOMETER S-1580 |
2 x | MYLAR film A350 (1000x500 mm) |
2 x | E-FUN BUG (ROI-Import) |
7 x | Crimping sleeves for 1.1 mm cable (10 pcs) |
1 x | Extension silicon 75 cm (Futaba) |
5 x | Short ball link M1.6 (6 uds) |
2 x | Sliding window 1:2,4 / 1.2,6 Scale |
2 x | Blind nut M6 (4 pcs) |
3 x | Glider PIROL |
3 x | Fox 4000 mm (Airwold) |
1 x | Horizontal cockpit anchor "tipe F3A" (2 pcs) |
4 x | Parachute expulsion foam |
5 x | Clevis plastico I=26 mm / hole 2mm / pin 1 (2 pcs) |
3 x | Canopy Astra |
3 x | DG-303 ACRO 3750 mm, winglets |
1 x | Monokote BLANCO jet (1.8x0.65m) |
3 x | Aluminium coupler M3/2 with ball bearing (1 pcs) |
2 x | Canopy Lock V1 M3 Red (2 pcs) |
6 x | Kwik link AL M3 L:40 mm (2 pcs) + Pin Ø 2,5 mm |
3 x | Fast'n EZ-CA-Hinge (12 uds) |
2 x | Ferrita 14x8x5.5 mm |
2 x | |
4 x | Towing hook |
1 x | 6 mm ball link M3 (10 pcs) |
3 x | Towing hook |
1 x | 102x26 Ø6.0 mm aluminium core wheel |
3 x | Kwik link AL M3 L:23 mm (2 pcs) + Pin Ø 1,6 mm |
2 x | Rescue 1,8m2 / BackPack |
2 x | Xplorer4 anemometro |
3 x | ASK 21 6.5m + pylona |
5 x | Cockpit metalic closing |
2 x | Astra (Top Model) |
6 x | Angled clevis with threaded rod M3 |
3 x | Oracover Verde 2 m |
1 x | Fuel dot blue |
1 x | Stainless steel cable Ø 0.5 mm (10 m) |
1 x | Aluminium wide washer M3 red (4 pcs) |
1 x | Motor holder for AC 28/7 |
4 x | Ventus 2cx 4.5 m de Luxe |
3 x | Oratex Natural White 2m |
1 x | Life guard Ø 35,0 mm white/red (2 pcs) |
2 x | Yellow smoke canister 140 g |
6 x | Mudguard wheels 112/127 mm |
4 x | Sprung retractable undercarriage (Alfa model) |
2 x | Polyurethan FESTO hose 3x0,5 mm, transparent |
7 x | Aluminun wheel collar 6 mm Ø (4 uds) |
2 x | Screw M4x12 (10 pcs) |
3 x | Universal Colour Paste signal white (RAL 9003) 1 Kg |
2 x | Ka-8b ELECTRIC 6000 mm ARF 1:2.5 (Phoenix Models) |
3 x | X-RAY Micro QR |
3 x | Tirpiz Battleship 1:200 |
2 x | Long ball link M3 (6 uds) |
2 x | LO 100 Scale 1:2 - Modellbau Bruckmann |
2 x | 34 mm Alu spinner 4 mm pleg. propeller |
2 x | Aluminium cap bolt washer M3 green (8 pcs) |
2 x | Long ball link M1.6 (6 uds) |
3 x | Oracover Yellow CADMIO 2 m |
5 x | Dumper propeller 6/8 mm |
1 x | White gelcoat 1 Kg |
3 x | Glider retract undercarriage 8-16 Kg 2.5-3.2(without wheel) 140m |
3 x | PPM Encoder Module |
3 x | LUNAK 4,00 m |
2 x | BALSA trip 4.0x4.0x1000 mm |
3 x | 5 mm Prop Adapter CN-Spinner |
2 x | 280 cc gasoline fuel tank complet |
1 x | BULL MØ1 2.600mm (mono color) |
1 x | Hitec 25 mm servo arm with M3 ball link |
3 x | Ferrita 17x10x6.5 mm |
6 x | Aramid 50 daN 50 m |
2 x | Cable coupler M2x66 (2 uds) |
1 x | Q-12 X-light 2000 mm Electric |
3 x | Flat washer 2.7 mm (20 uds)pcs) |
3 x | Spray adhesive INFUTAC (Clear) 500 ml |
2 x | Spring clamp for tube Ø50 mm |
2 x | Digital Air Speed Sensor And Pitot Tube Set |
3 x | Carbon fiber rod 2.0 mmx1000 mm |
2 x | Stainless steel cable Ø 0.62 mm (10 m) |
8 x | Kwik link AL M4 L:40 mm (2 pcs) + Pin Ø 2,5 mm |
1 x | Pin 3,0 to cable coupler M3,0 ⌀ (6 pcs) |
2 x | Fuel dot red |
3 x | Ball link M2 (10 pcs) |
2 x | 1/12 Pilot "Tom" |
3 x | Ventus 2cx 4.5 m |
3 x | Zurich Sport Sunglasse Dark Sensity MAGENTA Glasses |
2 x | 20 mm carbon horn |
3 x | PIT (Aero-Naut) |
2 x | 51 mm INO spinner (carbon imitation) |
1 x | Flat washer 3.2 mm (20 pcs) |
2 x | Threaded insert M5 (10 pcs) |
1 x | 28 mm turnbuckle |
2 x | Fiberglass plate 350x150x2.5 mm |
1 x | Blind nut M3 (4 pcs) |
2 x | Retract undercarriage |
2 x | Steering arm 12 mm Ø 4 mm |
4 x | 67 mm cylidric hinge Ø 4,5 mm (5 pcs) |
1 x | 1/6 Pilot "Cindy" |
2 x | A/C quality beech plywood 600x300x5.0 mm |
3 x | B4-0 rocket charges (6 pcs) |
3 x | SCHARNHORST Battleship 1:200 |
3 x | Trike XL motor set (motor+esc+prop) |
1 x | Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 15 m |
4 x | Aero-Master (Aero-naut) |
3 x | Festo 6mm Tubing Holder (10 uds) |
1 x | Savox Highvoltage Brushless Servo SB-2272MG (Tail rotor) |
4 x | DEMON CORTEXpro |
1 x | XPower H PROP HUB Ø5.0/20mm +2,5° |
3 x | FEMA DEFLECTOR LEVER FOR WHEEL BRAKE, |
2 x | Hardener Aero EPH 161 (250 g) |
2 x | Quicklock washer 1 mm (10 pcs) |
1 x | Carbon wing joinner 13,4 mm Ø 0,48 mm |
1 x | Mini neumatic retract 3 mm landing gear (Het-rc) |
2 x | Demoulding wedge red (40 x 20 mm) 5 pcs |
1 x | Double BLOCK 5x10x5 mm (3 pcs) |
4 x | Smoke set "S" |
2 x | SAVOX SH 0255 MG servo |
1 x | SF260 SIAI MARCHETTI 50E yellow/black (SebArt) |
2 x | ASW 15 5000 mm (Airwold) |
5 x | Servo RHINO pro SHV digi 4 |
2 x | Body for landing gear Ø 3 mm |
1 x | SU 29S 140 carbon landing gear |
3 x | Pulley brass 2,5/1 (2 pcs) |
3 x | Aluminun wheel collar 3.5 mm Ø (4 uds) |
1 x | 152x46 Ø6.0 mm aluminium core wheel |
1 x | Screw M3x16 (10 pcs) |
1 x | 3.2 mm Prop Adapter M6 |
2 x | Tray JETI for DS-14/16/24 Black |
1 x | Hose connector stopper 4 mm |
1 x | Gracia Maxi ARF, bags (Top Model) |
2 x | 3.17 mm Prop Adapter CN-Spinner |
2 x | Anodized alum. M4x0,7x20 mm Button Head screw (4 dark blue pcs) |
2 x | 45x9 mm foam special light KOVO wheel with radius (2 pcs) |
2 x | Nylon gear block Ø 3 mm (2 uds) |
5 x | Clevis plastico I=30 mm / hole 2.5mm / pin 1 (2 pcs) |
2 x | White smoke canister 100 g |
2 x | Balsa panel 3.0x100x1000 mm |
3 x | DISCUS 2A De Luxe 3.750 mm (Topmodel) |
1 x | Socket Head Screw M2,5x12 |
2 x | One touch canopy lock |
2 x | Cylidric hinge 43 mm Ø 2,5 mm (5 pcs) |
1 x | White aluminium 230 mm landing gear |
5 x | Kwik link AL M3 L:30 mm (2 pcs) + Pin Ø 1,6 mm |
4 x | Fournier RF-4D |
2 x | BALSA triangular 15x15x1000 mm |
3 x | Hawker Hunter (RBC Kits) |
4 x | 250 mm / 16 mm Airbrakes |
2 x | Pulley brass 2,5/1 (2 pcs) |
1 x | Cannon 12.7 cm (2 pcs) |
1 x | Trailing leg 131 mm |
2 x | Albatros ,spare fuselage (Top Model) |
1 x | Pan Head Screw M2x8 PH |
1 x | SERVO DES 588 BB MG |
1 x | Futaba 30 mm servo rounded arm |
1 x | Screw M2x6 (10 pcs) |
5 x | SAVOX SH 0254 servo |
2 x | Propeller diller for DLE30/DLE35RA/DLE40/DLE55/DLE61/EME 55/DA-5 |
1 x | Keypad ALTIS V4 |
1 x | Futaba 25 mm servo arm with ball link |
1 x | Futaba 50/60 mm servo pull-pull double arm with ball link |
4 x | M2,5 5Diam short black ball link V2 (2 pcs) |
1 x | Horizontal mounting servo holder |
2 x | Gracia Maxi ARF, spare wings (Top Model) |
3 x | 70x23 Ø3.5 mm aluminium core wheel |
1 x | Carbon fiber rod 1.5 mm x 1000 mm |
9 x | Hobbylite Filler, Balsa colour |
1 x | Carbon plate 350x150x0.5 mm |
1 x | resin-hardener package L-385 with hardener H-385 (875 g) |
2 x | Piloto Jet "Green" 1/6 Scale |
2 x | Nut for mounting M3 (4 pcs) |
6 x | Glider retract undercarriage 8-16 Kg 2.5-3.2(127 mm wheel) |
8 x | Threaded coupler ALU M2,5 Ø 4 (2 uds) |
5 x | Spannlack 1000 ml |
3 x | Threaded coupler M2 (10 uds) |
4 x | Glider retract undercarriage 8-16 Kg 2.5-3.2(140 mm wheel with b |
6 x | Z type of cable coupler Ø 2 (2 uds) |
9 x | Aluminium coupler M2/2 with ball bearing (1 pcs) |
3 x | Painting GHT Lexan Black 150 ml |
2 x | PARTALL® Hi-Temp Wax, 340 g |
1 x | Threaded coupler M2,5 Ø 3 mm (10 pcs) |
3 x | Threaded coupler ALU M3 Ø 4 (2 uds) |
3 x | 20 g tin paste |
3 x | Nitroverdu 500 ml |
4 x | Spray adhesive AEROFIX 2 |
5 x | Spray Graphit 33 |
2 x | Threaded coupler M2,5 Ø 2 mm (10 pcs) |
3 x | Kwik link AL M3 L:30 mm (2 pcs) + Pin Ø 2,0 mm |
4 x | Spray EC Red 400ml |
5 x | Z type of cable coupler Ø 1.8 (2 uds) |
3 x | Set freno para ruedas Dia. 127 mm |
5 x | Threaded coupler ALU M2,5 Ø 3 (2 uds) |
5 x | Presto SF Light Filler styrene-free (420 g) |
5 x | Z type of cable coupler Ø 1 (2 uds) |
6 x | Clevis plastico I=45 mm / hole 3mm / pin 1 (2 pcs) |
4 x | Kwik link aluminio IZD. M2.5 L: 23mm (2 uds) pin Ø 1.6 |
3 x | 500 ml sealer (DOPE) |
4 x | Solvent Plasti Dip 1000 ml |
4 x | Retract undercarriage for gliders 3-7 Kg 3.8-4.3 (without wheel) |
3 x | Threaded coupler Micro M2 Ø 0,8 mm (10 pcs) |
3 x | Threaded coupler ALU M3 Ø 6 (2 uds) |
4 x | Aluminium coupler M2,5/2 with ball bearing (1 pcs) |
1 x | Universal Colour Paste deep black 250 g |
4 x | Paint gun for sprays |
4 x | Servo DITEX EL0510M |
3 x | Threaded coupler ALU M2,5 Ø 6 (2 uds) |
3 x | Alu servo arm double RHINO |
4 x | 1000 ml sealer (DOPE) |
3 x | Threaded coupler ALU M2 Ø 4 (2 uds) |
2 x | Threaded coupler M3 (10 uds) |
5 x | Kwik link AL M2,5 L:23 mm (2 pcs) + Pin Ø 1,6 mm |
3 x | Threaded coupler ALU M3 Ø 5 (2 uds) |
3 x | Aluminium red ball links M3 V1 (10 pcs) |
3 x | Universal Colour Paste white 50 g |
1 x | Retract undercarriage for gliders 12-25 Kg 2-2.8 (without wheel) |
5 x | Brass ball links BS M3 V1 (10 pcs) |
4 x | Partall paste 650 g |
2 x | Ø 40 mm fiberglass motor-holder for electric motors |
2 x | Adap/Exten for Futaba 12-14C |
1 x | Savox Brushless Servo SC-1267 SG |
1 x | Lock nut M5 (10 pcs) |
3 x | Joint with bearing M2,5 22x5,5 |
1 x | Epoxy FINISH-CURE™ 20 min (130g) |
1 x | Glass fabric 390 g/m² (silane, twill) 100 cm x 20m |
2 x | KATANA DV 20 1470 mm |
2 x | Battery LiPo TATTU 1800 mAh 4S 14.8V 75C |
5 x | LO 100 ARC 3.3m,frame canopy |
1 x | DH82 Tiger Moth Scale 1:3.3 Panel Instrum. frontal |
2 x | resin-hardener package L-385 with hardener H-385 |
1 x | Sensor Ignition DLE 20/20RA/30/35RA/55/55RA |
6 x | Pulley brass 14/2 (2 pcs) |
2 x | 64 mm aluminium spinner |
2 x | Body for landing gear Ø 4 mm |
2 x | Servo Mount S (red) |
2 x | XPower XC5030/14 LS |
2 x | Press fitting for 1,0 diam. steel cable (10 pcs) |
3 x | Aluminium cap bolt washer M4 red (8 pcs) |
4 x | 3 mm Prop Adapter M6 |
1 x | Propeller POWER-PROP 11x8 |
1 x | X-RAY Micro QR (Fuselage with canopy) |
4 x | Plasti Dip Liquid Tape 429 ml black |
3 x | Couple M4 for wire (10 pcs) |
1 x | Plasti Dip Liquid Tape 429 ml orange |
5 x | Plasti Dip Liquid Tape 429 ml black |
3 x | Retract undercarriage for gliders up to 3,5 Kg |
5 x | Servo DITEX TD2612S |
3 x | Retract undercarriage for gliders up to 2 Kg |
5 x | Aluminium blue ball links M3 V1 (10 pcs) |
1 x | Threaded coupler Micro M2 Ø 0,8 (10 pcs) |
1 x | Peel ply 100 g/m² (plain weave) 50 cm x 2m |
2 x | Fox MDM 1 4000 mm DeLuxe |
3 x | Threaded coupler M2 (10 pcs) |
3 x | Ply-Span 450x600/13g Blue |
1 x | Aero-Master Wings (Aero-naut) |
1 x | Nose leg 155 mm with wheels 70 mm |
2 x | 1000 cc gasoline fuel tank complet |
2 x | A/C quality beech plywood 1520x750x3.0 mm |
2 x | Screw-lock connector M2 (2 uds) |
1 x | Thermoforming sheet 0.5mm (0.02in) DIN A4 |
2 x | PIX Hawk with accesories |
1 x | Screw M4x30 (10 pcs) |
1 x | Pushrod octagone 4/3 with coupler M3 |
1 x | Electric spoiler 440 mm (2 pcs) |
2 x | Oracover Yellow CADMIO 10 m |
1 x | Aluminium wide washer M4 Blue (4 pcs) |
2 x | Joint with bearing M2 22x5,5 |
4 x | Ventus 2cx 4.5 m Sapare Fuselaje |
2 x | 1/6 Pilot "Garry" |
2 x | Electric Landing Gear "Black Edition" BULL Mo1 2.6 GS200 (Electr |
2 x | Oracover Green10 m |
2 x | Fox MDM 1 4000 mm DeLuxe,cabina |
1 x | Electric Landing Gear "Black Edition" BULL Mo1 2.6 (Elektron Re |
3 x | Balsa panel 2.0x100x1000 mm |
4 x | 40 mm air cylinder |
2 x | NIKE-2 EVO ARF |
2 x | Carbon fiber rod 6.0 mmx1000 mm |
4 x | Futaba Aero Large Case - Internal Foam |
2 x | Ball link M1.6 (6 uds) |
3 x | Balsa panel 1.5x100x1000 mm |
3 x | 45 mm aluminium spinner. |
2 x | Pin type hinge Al 6x98 mm (2 pcs) |
4 x | Smoke set "Glider" |
3 x | Smoke pump RCEXL |
2 x | 120x60 mm C SLH KOVO wheel |
2 x | Swift S1 De-luxe 3.140 mm |
1 x | Filler Gauges |
1 x | White smoke canister 65 g |
1 x | Pilot JAN 1/4 Saiplanes |
1 x | 120 mm leg for retract undercarriage with rotation sistem (1 pcs |
1 x | M2/M1/6 3Diam long black ball link V1 (2 pcs) |
2 x | Servo TOPMODEL S7520 MG |
1 x | Foam plastic plates (310x210x8 mm) |
2 x | Socket head long ball link M3 (2 uds) |
1 x | 20x10 BIELA propeller (4-blades) Corsair Scale |
1 x | Propeller diller for DLE111 and DA85-150 |
1 x | Glass fabric 80 g/m² (Interglas 05533, finish FK 144, twill weav |
2 x | Pulley brass 10/2 (2 pcs) |
2 x | 36 mm white plastic spinner for fixed propeller |
4 x | Mixers smoke bombs AX-60 (5 pcs) |
3 x | Angle measurer |
2 x | Yellow smoke canister 65 g |
3 x | Glidder Mü13e (Bergfalke) |
2 x | Fiberglass motor-holder for electric motors |
2 x | Carbon fiber rod 2.5 mmx1000 mm |
2 x | Double aluminium servo arm V1-Hitec 2,5 inch M3 (blue) |
2 x | Ball Bearings for motor A60-V2 |
2 x | Fox 4000 mm with flaps (Airwold) |
3 x | Crimping sleeves for cable 0.85 mm (10 pcs) |
1 x | PropCover 16-20" (1 pcs) |
1 x | Fiberglass 163 g/m² 1m x 10 m (Aero, finish FK 144, plain) |
2 x | Nylon gear block Ø 6 mm (2 uds) |
2 x | Porta Kwik link M4 4 mm (2 pcs) |
3 x | Kwik link with arm M3xM2xL24 |
5 x | Glow filter |
1 x | Resistor 3W 5% OR47 |
1 x | 58 mm micro servo cover |
1 x | La Capitania di Venetia accesories |
2 x | 25 mm carbon servo arm |
2 x | Avanti S 2.3m Jet WHITE/BLUE (SebArt) |
2 x | PCARD Wireless System |
3 x | 150 mm inflatable superlight deluxe wheel (2 pcs) |
1 x | Cockpit aluminium closing |
1 x | Fiberglass plate 350x150x1.0 mm |
1 x | Servo SAVOX SV-1273 TG |
1 x | Landing gear axle Ø 4 mm (2 uds) |
1 x | 25,0 mm 3-BL M4 hydro-propeller (rigth hydropropeller) |
1 x | Mini neumatic retract 4 mm landing gear (Het-rc) |
1 x | ABS 500 x 400 x 2,0 mm (white) |
3 x | 48 x 10 mm cylidric hinge Ø 3,0 mm (10 pcs) |
1 x | 63 mm INO spinner (carbon imitation) |
1 x | Spring Clip Ø25 mm |
1 x | RX cabel |
2 x | Screw M2.5x20 (10 pcs) |
1 x | Mig-15 "UTI" (RBC Kits) |
1 x | Straightened rod Ø 5.0 mm x 1000 mm |
2 x | M2 5Diam black ball link V2 (2 pcs) |
1 x | 2.5 inch aluminium core wheel (1 pcs) |
2 x | Balsa panel 5.0x100x1000 mm |
2 x | Glider KNIRPS |
1 x | Servo M2x7/16 screw (4 pcs) |
1 x | Motor Mount for TITAN ZG45 and ZG62, length 72 mm |
1 x | |
1 x | 28x5 mm wires output (2 pcs) |
2 x | Red smoke canister 100 g |
1 x | DH82 Tiger Moth Scale 1:3.3 Panel Instrum. trasero |
3 x | Optical RPM Sensor |
1 x | Contest-S-Pult-Carbon mc-20/mc-24 |
1 x | Hitec 25 mm servo arm with ball link |
4 x | Towing hook <3m |
1 x | Pan Head Screw M2x6 PH |
2 x | Styrene plate 320x120x0.5 mm |
1 x | Cooler motor type 280 |
3 x | Plastic caps for AIR BURTS (30 pcs) |
1 x | Tornillo cabeza boton M4x12 mm (5 pcs) |
1 x | ABS 500 x 400 x 1,5 mm (white) |
1 x | Wheel 22 mm |
3 x | "L" servo arm 65x49 mm (2 pcs) |
2 x | Canister combo DLE 55 cc |
1 x | Futaba 30 mm servo arm with M3 ball link |
1 x | Transmitter JETI Duplex DS-12 EX Multimod RED |
2 x | Carburator Moki S400 |
3 x | Servo TOPMODEL DS9010 T |
2 x | 50 class GLOW conversion set (SebART) |
2 x | Blind nut M8 (10 pcs) |
1 x | DPSI Micro - RCS RV |
1 x | Propadapter for motor A50 |
2 x | Small Crow DLE-170M |
2 x | 14 mm portholes (10 pcs) |
1 x | Socket Head Screw M2x8 |
3 x | XPower XC4226/12 LS |
7 x | Fully Threaded Steel Rod M2,5 (2 uds) |
2 x | A/C quality beech plywood 498x247x2.0 mm |
2 x | Jet Afterburner Simulator NF-Jet4 RY |
2 x | Straightened rod Ø 2.5 mm x 1000 mm |
1 x | Swift S1 De-luxe 3.730 mm |
2 x | Nylon gear block Ø 5 mm (2 uds) |
1 x | Futaba 17 mm servo arm with ball link HITEC |
2 x | Parachute BACKUP X100 |
3 x | Oracover Yellow CUB 2 m |
2 x | Allen wheel collar M4x6 |
2 x | Ball link M3 (6 uds) |
1 x | Rudder 2_Tray 3.5~4 inch |
1 x | Screw M2.5x8 (10 pcs) |
1 x | Propeller APC 10x5 Electric |
1 x | Pin 2,0 to cable coupler M2,0 ⌀ (6 pcs) |
2 x | Red aluminium servo arm V2-Futaba 2,0 inch |
2 x | Cabin latch Fox MDM1 4m (pair) |
3 x | PARTENAVIA 2020 mm ARF with Flaps |
2 x | Propadapter for motor A60-V2 |
1 x | Nut for mounting M2,5 (4 pcs) |
1 x | DPSI 2001 RV |
1 x | Fod Guard 94x32 mm |
1 x | Kwik link aluminio IZD. M3 L: 30mm (6 uds) pin Ø 2 mm |
1 x | Skyhawk (RBC Kits) |
1 x | 18x10 BIELA propeller |
3 x | Pulley brass 16/2 (2 pcs) |
2 x | Hexagonal Nut M4 (10 pcs) |
2 x | Wheel collar 3 mm Ø (4 uds) |
4 x | Adjustable launching hook |
3 x | Y-Hose connector 2-2-2 mm |
1 x | Seabrt 50E, Motor Mount (SebART) |
1 x | 45 mm aluminium spinner (Kavan) |
2 x | Pan head screw M2x16 PH |
2 x | DPSI RV Mini 6 Magic |
1 x | Class 30, White wheel pants (SebART) |
1 x | DPSI RV Mini 6 Magic with Gas-Cap switch |
1 x | LA500 freewheel bearing |
1 x | Seabrt 30E, Motor Mount (SebART) |
1 x | Fiberglass landing gear for 140-160 |
1 x | Propeller POWER-PROP 13x8 |
2 x | 69x25 mm (2.75") axle Ø4 mm aluminium core wheel |
2 x | LO 100 ARC 3.3m,cabina |
1 x | Pick up for motor Moki 250 cc 7 cylinders |
2 x | Monokote BLUE metalizado (1.8x0.65m) |
1 x | Propeller electric carbon 6.5x4 |
1 x | DUPLEX 2.4 EX MBar |
1 x | "Taxi Tank" Fuel Tank |
2 x | Tapping Screw M2.2x65 (10 pcs) |
2 x | Pilatus PC-21 50E, wings carrying bags (SebArt) |
2 x | Flat washer 2.2 mm (20 pcs) |
1 x | Rubber bushing with bracket "A" type (2 pcs) |
1 x | Engine mounts for .09 - .19 engine |
1 x | Avia spare blue cockpit (Top Model) |
2 x | Screw M2.5x10 (10 pcs) |
2 x | "M" set |
2 x | Stainless steel 4 m Pull-Pull complet set (max 20 kg) |
2 x | Landing gear clamp for Ø 2 mm (4 uds) |
3 x | Pulley brass 4/1,5 (2 pcs) |
1 x | Manometer 4 mm |
2 x | Switch Cap L (silver) |
1 x | Nylon Screw M6x40 |
1 x | Circlik for shaft 2.3 mm (10 pcs) |
1 x | Wheel cover holder Ø 5 mm (2 uds) |
1 x | bavarianDEMON USB cable |
1 x | Avanti S, Cockpit sunCover (SebART) |
2 x | Landing gear strap medium (4 uds) |
1 x | Fod Guard 73x32 mm |
1 x | Disposable Injector Bags (30x16cm) 100 pcs |
3 x | Round Rod 1.0x3.5 cm |
1 x | Cylinder ZG 26SC/SLH |
4 x | ARAMID honeycomb 1300x2600x2 mm |
3 x | Lock washer 2.2 mm (20 pcs) |
2 x | 14 mm Portholes for screws (10 pcs) |
1 x | SSPS105 Super Hi-Power servo |
2 x | FPV Station for SE TX-Tray V1 |
1 x | Antiaircraft gun 3.7 cm (5 pcs) |
1 x | SF260 SIAI MARCHETTI 50E red/white (SebArt) |
1 x | M2,5 5Diam metal ball link V3 (2 pcs) |
2 x | M4xM2,5xL30 nylon clevis and arm (10 uds) |
3 x | Cable coupler M3 (10 uds) |
2 x | 43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs) |
1 x | Lock nut aluminium M3 (4 pcs) |
4 x | Cable coupler M2 (10 uds) |
2 x | M3/5Diam metal ball link V3 (2 pcs) |
1 x | Snap pin for micro clevis (10 uds) |
3 x | 76x24 mm (3.0") Type jets aluminium core wheel |
1 x | Propeller APC 12x3.8 SF |
3 x | Pulley brass 6/1,5 (2 pcs) |
4 x | LO 100 ARC 3.3m |
2 x | Reed valve petal for DLE 170M |
1 x | Ball link V1 Ø7 M4/3 (6 uds) |
2 x | Peel ply 93 g/m² (plain weave) 150 cm x 5m |
4 x | 41x5,5 mm wires output (2 pcs) |
1 x | Sparkplug DLE CM6 |
2 x | 20x15 Falcon electric V2 |
1 x | Propeller APC 10x4.7 SF |
1 x | Servo arm with 5 mm hole to FEMA 9810A |
1 x | Spinner 60 mm White (Kavan) |
1 x | Canopy Latch |
1 x | 10 mm gas motor standoff |
2 x | Ø 2 mm pin for Kwik link MPJ2162/2163 (6 pcs) |
1 x | Fiberglass plate 350x150x1.5 mm |
2 x | A/C quality beech plywood 498x247x1.2 mm |
1 x | Screw M3x8(10 pcs) |
1 x | 57 mm aluminium spinner. |
3 x | Anodized aluminium servo M3x16 screw (4 red pcs) |
1 x | Jet Afterburner Simulator NF-Jet3 RY |
1 x | TopFuel LiPo 25C-ECO-X 1800mAh 2S |
5 x | Parachute PV6 for F3J |
1 x | 40 mm black plastic spinner for fixed propeller |
2 x | Pulley brass 8/2 (2 pcs) |
1 x | Stainless steel flange for VM 60/70/120/140 |
1 x | Pilatus PC-21 50E, Decal set (SebArt) |
1 x | 17x10 BIELA propeller (3-blades) |
1 x | 29x23D BIELA propeller |
1 x | 25 mm Sandpaper file |
1 x | Propeller MEJZLIK 22x10 Electric light (36 g) |
1 x | 2,3 mm Prop Adapter M6 |
1 x | XPower H PROP HUB Ø6.0/42.5mm 0º |
3 x | 63x20 mm (2.5") axle Ø5 Type jets mm aluminium core wheel |
4 x | Oracover White 2 m |
1 x | Micro clevis (10 uds) |
2 x | 38x4,5 mm wires output (2 pcs) |
1 x | Wheel FEMA 100 mm / 6 mm |
1 x | 12 mm mast holder |
2 x | 6 mm Prop Adapter M8 |
2 x | 25 mm fenders (10 pcs) |
2 x | White smoke bombs AX-60 (5 pcs) |
1 x | Blue Aluminium lock nut M4 (4 pcs) |
1 x | Life guard Ø 17,0 mm (10 pcs) |
1 x | Fully Threaded Steel Rod Duralumin 40 mm M3 (2 pcs) |
1 x | Lock washer 3.2 mm (20 pcs) |
1 x | Rubber bushing with bracket "B" type (2 pcs) |
2 x | 22x10 BIELA pusher propeller |
1 x | 9x4.7 * 22x12 carbon propeller |
2 x | Alu-Cross for Backmount of A60-V2-Backmountmotors |
1 x | CESSNA 50E White/Blue |
1 x | Festo 4mm Tubing Holder (10 uds) |
1 x | LA500 ciclic lever |
1 x | Aluminium wide washer M3 blue (4 pcs) |
1 x | resin-hardener L-385 H-385 (1250 g) |
1 x | 550 cc gasoline fuel tank complet |
2 x | Motor DLE 430 cc - Paramotors |
1 x | DLE-111 Crankcase V2 Conversion Kit |
3 x | DG-303 ACRO 3750 mm (Airworld) |
1 x | LA500 pilot-seat set |
3 x | M3 Maxi ball link (2 uds) |
2 x | BALSA triangular 10x10x1000 mm |
1 x | 64x20 mm (2.5") Type jets aluminium core wheel |
5 x | Swift S1 De-luxe JEPPESEN 3.140 mm |
3 x | Field folding model stand SebArt |
2 x | Allen wheel collar M3x5 |
1 x | Spinner red 36-38 mm |
1 x | Boat 140 mm |
4 x | Metal clevis M2,5 (10 uds) |
3 x | PVC transparent red battery termo-retract 68 mm (10 m) |
1 x | Telemetry interface ALTIS 20 cm |
1 x | PowerBox Smokepump JETs 2x outside |
2 x | Swift 5050 mm (Airwold) |
2 x | Monoprep (RBC Kits) |
2 x | 58x20 mm (2.25") axle Ø5 Type jets mm aluminium core wheel |
1 x | 22x10 prop Super Silence |
1 x | Racor 4/6 mm |
2 x | Aluminium alloy coupler for carbon tube 6/M4 |
1 x | Servo MKS HV 777A+ |
2 x | Tip wing protector 28x10x12 (2 pcs) |
3 x | Metal clevis M2 (10 uds) |
1 x | 36,0 mm propeller (rigth propeller) |
1 x | Sukhoi 29S 50E V2, Yellow Motor Cowl(SebART) |
1 x | LA500 Blades |
1 x | 120x60 mm SLH KOVO wheel |
3 x | Clip mini fixing for wing (2 pcs) |
2 x | Birch plywood plate 600x300x4.0 mm |
1 x | F-22 Raptor (RBC Kits) |
1 x | DH82 Tiger Moth ARC Scale 1:3.3 |
1 x | |
2 x | 6 mm hexagonal ball link M3 (10 pcs) |
2 x | 60x25 mm tail wheel "type F3A" |
3 x | White smoke bombs AX-18 (5 pcs) |
2 x | 57 mm micro-mini servo cover |
1 x | Socket head ball link M3 (2 uds) |
1 x | Carburetor DLE 30 |
2 x | Micro clevis (10 uds) |
3 x | PVC yellow battery termo-retract 69 mm (10 m) |
1 x | Battery LiPo GENS 6000 mAh 2S 7.6V 120C (Gens Ace Hard Case) |
2 x | Boat with oars 110 mm |
2 x | SEBART 30E, Yellow Filler LG (SebART) |
2 x | 18x8 BIELA 3Bl propeller (3-blades) |
1 x | Locking cable tie 4.6x203 (uds) |
1 x | Dual Sequencer Gear and Canopy |
2 x | Aluminium M2x12 mm screw (4 pcs) |
1 x | Superlight deluxe wheel 40 mm (2 pcs) |
1 x | TopFuel LiPo 20C-ECO-X 4600mAh 5S Competition F3A 2017 |
1 x | KatanaS 50E, Decal set (SebART) |
1 x | Pushrod greyline 3/2 with coupler M2 L: 1000 mm |
1 x | Hitec 38 mm servo arm with ball link |
1 x | Fully Threaded Steel Rod Duralumin 34 mm M3 (2 pcs) |
1 x | Aero-Master Cabine (Aero-naut) |
1 x | Transmitter JETI Duplex DS-24 EX Carbon Line Dark GREEN Multimod |
1 x | Gracia Maxi ARF (Top Model) |
1 x | Snap for floding prop for 2 mm axi |
2 x | Peel ply 95 g/m² (plain weave) 20 mm x 100 m |
2 x | M3/5 Diam metal short ball link V3 (2 pcs) |
2 x | Nylon hinge for flaps 33x9 (2 pcs) |
1 x | GRAFAS MAXI ARF |
2 x | Cable silicona female batt. receptor 30 cm (Futaba) |
1 x | Double aluminium servo arm V1-Futaba 2,5 inch M3 (red) |
1 x | Carbon fiber flat 1000x6.0x0.8 mm |
2 x | 3,2 mm Prop Adapter M6 |
2 x | Aluminum Fold Prop Spinner 34 mm / 3 mm |
3 x | Set cintas unión paracaídas 145 cm |
1 x | Bluetooth Adapter JET CENTRAL |
1 x | Propeller Pleg CAM Carbon 15x13 |
7 x | Aluminun wheel collar 2.5 mm Ø (4 uds) |
1 x | Propeller diller for DA50, DLE55 red |
1 x | Nylon threaded block M5 (2 uds) |
2 x | Glass fabric 49 g/m² (1,27 x 10 m) |
1 x | Cylynder DLE 20-RA |
3 x | BULLIT Wing 1095 mm |
1 x | Lock nut M4 (10 pcs) |
3 x | 5 mm Prop Adapter M6 |
3 x | Wing tips support for AX-18/AX-60 (2 pcs) |
1 x | Propeller MENZ-S 20x10 3 blades |
1 x | Transmitter JETI Duplex DC-16 II RED Carbon Line Mod.2 |
2 x | ALU servo arm 3 mm shaft |
1 x | Servo FUTABA BLS 276SV |
2 x | Quicklock washer 3 mm (10 pcs) |
2 x | Mig-29 "FULCRUM" (RBC Kits) |
2 x | Kwik link with arm M5xM2,5xL30 |
1 x | Sukhoi 29S 30E, Motor Mount (SebART) |
1 x | Miss Wind 50E White landing gear(SebART) |
1 x | Carburator Moki S250 |
1 x | Hitec 46 mm servo arm with ball link |
2 x | Pin 2,5 to cable coupler M2,5 ⌀ pin 2,5 (6 pcs) |
1 x | 95 mm aluminium spinner. |
1 x | Aeronaut Baumbeschlag (Ms) 10 mm |
2 x | 90x75 mm standart servo cover |
1 x | LiPo Storage Box Standard 1 Type 1 |
1 x | LiPo TopFuel ECO-X 3000 mAh 3s 20C MTAG |
2 x | Wing bolts M6 Steel screw Blue (2 pcs) |
2 x | Red aluminium servo arm V1-Futaba 20 mm M2 |
1 x | AngelS 50E White Motor Cowl(SebART) |
1 x | Spinner black 40-45mm |
1 x | Clip fixing for wing (2 pcs) |
1 x | Servo MKS HV6130 |
1 x | Thermoforming sheet 0.1mm (0.004in) DIN A5 (5 pcs) |
1 x | Cable video GoPro |
1 x | Propeller Pleg CAM Carbon 12x11 |
2 x | Set clevis for pull-pull (TY13233 & TY13234) |
1 x | 75 mm |
2 x | AX-60 starters (5 pcs) |
1 x | DPSI RV Mini 6 (2008) |
1 x | Rangefinder 39x20 mm (2 pcs) |
1 x | Spinner 55 mm White (Kavan) |
1 x | Propeller APC 11x4.7 SF |
1 x | Straightened rod Ø 1.5 mm x 1000 mm |
2 x | Pilot "Duke" Legends Series (Slimline) |
1 x | Pin to cable coupler M1,6 ⌀ (6 pcs) |
1 x | Spring pin Ø 1 x 6 mm (10 pcs) |
2 x | Carbon fiber rod 0.5 mmx1000 mm |
1 x | 40 mm white plastic spinner for folding propeller |
3 x | LUCAS pilot ARTF |
2 x | Transmitter JETI Duplex DS-24 EX Carbon Line Dark BLUE Multimod |
1 x | Electric Fuel pump |
3 x | Red smoke canister 140 g |
3 x | Cockpit aluminium closing 4.7g |
2 x | Smoke set "M" |
1 x | 30cm Flexible Stainless Steel Exhaust Tubing D=25mm |
2 x | Antenna 50 mm (2 uds) |
3 x | A/C quality beech plywood 600x300x0.6 mm |
1 x | 4 mm Prop Adapter M8 |
1 x | Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 22 roll |
1 x | Socket Head Screw M2x12 |
1 x | Ø 0,5 mm Pull-Pull Kevlar Line (3 m) |
1 x | Peel ply 95 g/m² (plain weave) 100 mm x 100 m |
2 x | Ventus 2cx 4.5 m Winglets |
4 x | Aluminun wheel collar 4 mm Ø (4 uds) |
1 x | Monokote PLATINO metalizado (1.8x0.65m) |
3 x | M2/M1/6 3Diam long black ball link V1 (6 pcs) |
2 x | Spring lock washer 4.1 mm (20 pcs) |
1 x | Truck-trailer for gliders 720 x 239 mm |
2 x | Red aluminium servo arm V1-Futaba 1,5" inch M3 |
1 x | Spring Clip 28 mm teflon tube |
1 x | Connectors banna oro 4 mm (M/F) (ultralight) |
2 x | Carbon fibre sandwich sheet 350x150x3 mm |
1 x | Propeller APC 14x8.5 Electric |
2 x | Switch Cap L (Blue) |
1 x | 3-blades 30x12 carbon prop Super Silence |
1 x | Glass fabric 49 g/m² (Finish FE 800, plain) 110 cm x 3m |
1 x | Super light ∅45x9 mm axi ∅3 mm metalic core wheel |
1 x | Reduction gear 2.8:1 for ZG 38 inline version |
1 x | Avanti S 1.8m Jet White/Blue + Landing gear |
2 x | Carbon Non-Woven, 160 g/m² 100 cm 10 m |
3 x | 1/7 Pilot "Japanese" |
1 x | Propeller MENZ-S 15x6 3 blades |
1 x | Propeller POWER-PROP 16x10 |
2 x | LED lighting system High Power |
2 x | Telemetry interface ALTIS 12 cm |
1 x | AngelS 50E White landing gear(SebART) |
3 x | Ball link M2,5 (10 pcs) |
1 x | Avanti S Jet , Carrying bags (SebArt) |
2 x | WIND 50E White landing gear(SebART) |
1 x | BATTWIN BATTERY REDUNDANCY SYSTEM |
2 x | Carbon tube (L 1000 mm, Ø4 mm, Ø3 mm) |
1 x | TopFuel LiPo 35C-ECO-X 2400mAh 2S MTAG |
2 x | Albatros ,spare cockpit (Top Model) |
2 x | Cockpit plastic closing |
1 x | Servo HITEC D645 MW |
1 x | Schul-Malpinsel Gr.5 |
2 x | 90 mm rods + T patellas set for direction control |
1 x | Avanti S 1.8m Jet White/Blue |
1 x | Lock nut aluminium M2 (4 pcs) |
2 x | M2,5 / 5Diam metal short ball link V3 (2 pcs) |
1 x | Pipa 3D BULL MØ1 2.600mm |
1 x | 5 mm Prop Adapter M8 |
4 x | 30 mm Alu spinner 3 mm pleg. propeller |
1 x | Propeller electric carbon 10.5x6 |
1 x | Bags MB-339 (Wings & Elevators) |
1 x | Piston ring for ZG 20 and G240RC |
3 x | Wheel collar 4 mm Ø (4 uds) |
1 x | Bags wings/rudder ASPIRE |
1 x | AngelS 50E YELLOW/BLACK (SebART) |
1 x | Nylon threaded block M6 (2 uds) |
2 x | Landing gear clamp for Ø 4 mm (4 uds) |
3 x | 30E class, Spare wing joinner (SebART) |
1 x | Heat sink for Optotronix LEDs |
1 x | Sukhoi 29S 30E, Yellow cockpit(SebART) |
2 x | Servo HITEC HS-53 |
1 x | Motor DLE 200cc Std |
1 x | Crystal Universal RX 35.050 Ch 65 |
1 x | Steering arm 16 mm Ø 3 mm |
3 x | Stickers-digit for marking |
2 x | Glass fabric 25 g/m² (1 m²) |
1 x | Propeller APC 14x10 Electric |
2 x | Lock washer 4.3 mm (20 pcs) |
2 x | Pushrod octagone 4/3 |
1 x | Propeller APC 8x6 SF |
1 x | Pin type hinge Al 4,5x70 mm (2 pcs) |
3 x | Wing OXY 0,5 pulgadas2 |
2 x | Brass hexagonal rod Ø 3.5 mm x 1000 mm |
1 x | Extension for SensorSwitch 60cm |
2 x | Gold aluminium double servo arm JR/Graupner 40 mm M3 F3A |
2 x | Socket head ball link M3 (2 uds) |
1 x | LA500 Autogyro |
2 x | Fiat G-91 Frecce Tricolori RTF Set |
1 x | Propeller MEJLIK 16x11 3 Blades |
2 x | Class 30, Red wheel pants (SebART) |
1 x | Top light bright 10mm/3V (2 pcs) |
1 x | Blind nut M2 (10 pcs) |
3 x | Anchor 80 mm (2 uds) |
1 x | Grease Dryfluid HELI |
1 x | Life guard Ø 25,0 mm (2 pcs) |
2 x | White smoke bombs AX-3 (10 pcs) |
1 x | Corby Starlet (RBC Kits) |
1 x | Bidule 111 3000 mm |
1 x | Cockpit latch closing I=10 mm |
1 x | Wheel cover holder Ø 3 mm (2 uds) |
1 x | Offshore-Schleppwinde Bs |
1 x | Propeller APC 4.75x4.75 |
2 x | Brake for 140 mm wheels |
1 x | Teflon rollers 80 mm x 15 mm Diam. |
1 x | Hinge 4x14 mm (20 pcs) |
2 x | PVC transparent battery termo-retract 85 mm (1 m) |
3 x | Aluminun wheel collar 3 mm Ø (4 uds) |
1 x | Sukhoi 29S 2,6 m White/Blue (SebART) |
2 x | Propeller diller for DLE170 |
1 x | Porta Kwik link M4 3 mm (2 pcs) |
1 x | CAM-Carbon Light Prop 11x7" |
1 x | Bags wings/rudder ODYSSEY |
1 x | Outboard Aqua-Race 50 |
3 x | wire tensioner (red) |
2 x | Antenna Cloverleaf 5.8 GHz Tx - Rx |
1 x | Propeller APC 5.5x4.5 |
2 x | ROBIN S50E RED/WHITE |
1 x | 16x8 BIELA propeller (3-blades) |
2 x | Micro clevis 0.8 mm(10 uds) |
1 x | Pulley brass 12/2 (2 pcs) |
1 x | Socket Head Screw M2x5 |
2 x | Ø 1,6 mm pin for Kwik link MPJ2160/2161 (6 pcs) |
1 x | 6x4 tree blades propeller |
1 x | Cono NUT 5/16"x 24 -M4 |
4 x | Antenna holder bracket double |
1 x | Sukhoi 29S 50E V2, Red Motor Cowl(SebART) |
1 x | Fully Threaded Steel Rod alumin 60 mm M3 (2 pcs) |
2 x | Stainless steel cable Ø 0.88 mm - 60 kp (10 m) |
1 x | TAKEO 3.6m electric |
1 x | Ø 2,5 mm pin for Kwik link MPJ2170/2173 (6 pcs) |
1 x | Gobe R-26S (Airwold) |
1 x | 50x45 mm micro-mini servo cover |
1 x | F-35C (RBC Kits) |
1 x | Screw M3x12 (10 pcs) |
1 x | KatanaS 30E WHITE Landing Gear(SebART) |
1 x | M3 black washers (4 pcs) |
3 x | Stainless steel cable Ø 0.52 mm - 15 kp (10 m) |
1 x | Carbon fiber rod 4.0 mmx1000 mm |
2 x | Nylon hinge for flaps/gates 27x10,5 (2 pcs) |
3 x | Tapping Screw M2.9x13 (10 pcs) |
1 x | 10 mm floating pad (72 pcs) |
2 x | 10 mm portholes (10 pcs) |
1 x | Capstan of plastic 91x44x45 mm |
2 x | Micro flex hinge (12 uds) |
1 x | PVC plate 320 x 194 x 0.23 mm (brown) |
2 x | Tapping Screw M2.2x13 (10 pcs) |
2 x | Foam plastic plates (310x210x5 mm) |
1 x | PowerBox Smokepump |
1 x | DLE Ignition 170M |
2 x | Horn for flap control (1 pcs) |
2 x | Cable grommet Ø 6.4 mm (4 uds) |
2 x | Split M1,2x10 (10 pcs) |
3 x | Porta Kwik link M3 3 mm (2 pcs) |
1 x | Wheel 115 mm with electromagnet and brake disk + E-Brake (2 uds) |
2 x | Cap closure 33/23.5mm (2 uds) |
1 x | Electric Fuel Pump 12V |
1 x | Landing gear strap large (4 uds) |
1 x | Locking cable tie 3.2x142 (uds) |
1 x | Hexagonal Nut M4 (20 pcs) |
2 x | 4 mm Prop Adapter M8 |
1 x | Avanti XS Jet , Exhaust for JetCat P-60/P-140 (SebArt) |
2 x | Porpeller HUNTER 400 |
1 x | Resistor 3W 5% 2R2 |
3 x | Piston ring for DLE-20 |
1 x | Servo MKS HBL599 SL |
1 x | Servo M2x9/16 screw (4 pcs) |
1 x | Excentric gearbox for 2,3mm axis (4,1:1) |
1 x | Prop Shaft Adapter 8 mm/M12 "long" |
1 x | Propeller APC 7x4 Electric |
2 x | Prop Shaft Adapter 5 mm "long" |
2 x | Ø 1,6 mm pin for Kwik link MPJ2150/2157 (6 pcs) |
2 x | Blind nut M5 (4 pcs) |
2 x | 21x12D BIELA propeller (3-blades) |
4 x | 37 mm PVC transparent battery termo-retract (1 m) |
1 x | Battery RX JETI LiIon RB 3100 7.2v |
1 x | Fuel dot Gold color |
2 x | LED blink wire flashing (white - 2pcs) |
2 x | 0,14 mm PVC servo wire extension, ZH micro conector. |
1 x | Motor Mega AC 16/15/05 CE F5J |
1 x | Propeller APC 13x10 Electric |
1 x | DUPLEX 2,4EX Switch SAFETY 2-Position Safety DC-16/14 |
1 x | 65 mm mini servo cover |
1 x | Propeller POWER-PROP 16x8 |
1 x | Screw M3x30 (10 pcs) |
1 x | TMM 1210-3S heli |
1 x | Pinion 09 - 2 mm |
1 x | LA500 housing-upper cyclic |
2 x | Balsa panel 4.0x100x1000 mm |
2 x | PowerFuel RX V2 Fuel Pump |
2 x | Propeller APC 8x3,8 SF Electric Pusher |
1 x | Super Light Wheels(Sponge Tyre) Ø 65mm x 19mm (2pcs) axis Ø 3.5m |
1 x | Straightened rod Ø 3.0 mm x 1000 mm |
1 x | Stainless steel 3 m Pull-Pull complet set (max 20 kg) |
1 x | Glass fabric 49 g/m² (1,27 x 20 m) |
1 x | Recess mount-rem. glow plug set |
1 x | Thermoforming sheet 0.3mm (0.039in) DIN A4 |
1 x | DUPLEX R12 receiver REX Assist |
2 x | Crimping sleeves for cable 1.3 mm (10 pcs) |
1 x | Propeller Pleg CAM Carbon 11x5 |
1 x | PARTENAVIA 2020 mm ARC with Flaps |
3 x | Big-Malibu XL Roof box with surfboard rack GREY |
1 x | Avanti S Jet , Field folding model stand (SebArt) |
1 x | AXI 2808/24 V2 Long |
1 x | Red aluminium servo arm V2-Futaba 1,75" inch M3 |
2 x | M3 INDUSTRIAL ball link (2 uds) |
2 x | 50 mm white plastic spinner for fixed propeller |
1 x | Sukhoi 29S 50E V2, White Motor Cowl(SebART) |
1 x | 90 mm CFK long Spinner fixed by a central screw |
1 x | DUPLEX R10 receiver 2,4GHz |
1 x | Cable video GoPro and 5V cable |
1 x | FunCup XL RR |
1 x | Insulator block ZG 38/S/SC |
1 x | DIVA cabin cruiser |
2 x | 15 mm floating pad (30 pcs) |
1 x | 63x12 mm foam special light KOVO wheel with radius (2 pcs) |
1 x | DUPLEX 2.4EX MUI 75 |
1 x | Pushrod greyline 3/2 with coupler M2 |
2 x | F-100 Super Sabre (RBC Kits) |
1 x | Cable grommet Ø 5 mm (4 uds) |
1 x | AngelS 30E White cockpit(SebART) |
1 x | Lock nut aluminium M2.5 (4 pcs) |
6 x | 2,4x1000 mm 2:1 green termoretract tube |
2 x | M3-M4 rubber washer (8 pcs) |
2 x | Pegasus 2050 mm F4J (Top Model) |
1 x | Steel tube (L 1000 mm Ø10 mm, Ø9,7 mm) |
1 x | PROMETHEUS 50E , Wheel pants red(SebART) |
2 x | Aluminium wide washer M3 gold (4 pcs) |
1 x | L ELBOW 90º ø 25 mm |
1 x | DC Small for MultiLog & UltraLight |
1 x | Chopped glass fibre strands 3 mm |
1 x | MXS-C (Mini) Blue |
1 x | Carburetor DLE 170 |
1 x | Brass hexagonal rod Ø 5 mm x 1000 mm |
1 x | Servo MKS 6100 DS |
1 x | Wing OXY 5,0 m2 |
1 x | Carbon plate 350x150x4.0 mm |
1 x | Carbon Non-crimp ST 200 g/m² 50 cm x 20 m |
1 x | Blue aluminium servo arm V2-Hitec 2,0 inch M3 |
2 x | Truck-trailer for gliders 720 x 285 mm |
1 x | Wheel 115 mm with electromagnet and brake disk (2 uds) |
2 x | Oracover Azul 2 m |
1 x | 46 mm Futaba servo arm tandem with ball link |
1 x | Servo SAVOX SV-1260 MG |
3 x | Xoar Electric Beechwood Prop 22x10 |
2 x | Z-shaped servo mount |
3 x | Cable tie mounts 4.3 (4 uds) |
1 x | PVC grid diagonal 290x185x0.32 mm |
1 x | OPTOTRONIX Aurora LCU |
2 x | Siesta T tail (Topmodel) |
1 x | Exhaust elbow for SAITO FA65/72/80/82a/91S/100/ |
2 x | Albatros red/white (Top Model) |
1 x | PILATUS PC-6 Turbo Porter 33% 5.290 mm |
1 x | Check valve quick hose connector 4-4 mm |
1 x | Tipsy Nipper (RBC Kits) |
1 x | DLE 55-RA Muffler |
1 x | 18x6 BIELA propeller |
1 x | Propeller POWER-PROP 10x7 Izda |
1 x | KatanaS 30E YELLOW/BLACK Tail Set (SebART) |
1 x | Piston ring for DLE-55/111/222 |
1 x | Carbon plate 350x150x1.0 mm |
1 x | Buy Perforated film 145 cm / 50 m |
1 x | JM electric Pump |
1 x | Steering arm 16 mm Ø 4 mm (2 uds) |
2 x | Pull-Pull complet set with CF rudder double servo arm |
1 x | Top light Red 10mm/3V (2 pcs) |
1 x | BAE HAWK Mini 1.29m RED ARROW ARF +elec.L.Gear + 3 Microservos |
2 x | Ply-Span 450x600/13g Yellow |
2 x | Pilatus PC-21 50E, GLOW set conversion (SebArt) |
1 x | Sebart 2.2 m WHITE/BLUE (SebART) |
2 x | Spring lock washer 2.6 mm (20 pcs) |
1 x | GPS Altis |
1 x | Pin hinge 26x11 mm (10 uds) |
2 x | Buy Perforated film 100 cm / 20 m |
1 x | Blade holder metal LAMA |
1 x | 3,2 mm Prop Adapter M6 |
1 x | AXI 2826/8 V2 Long |
1 x | DLE 55 Ignition unit |
2 x | SAVOX SH 1250 MG servo digi |
1 x | Carbon Fiber TeXtreme® 80 g/m² (plain) 100 cm, roll/ 10 m |
1 x | Pinion 18 - 3,2 mm |
1 x | Prop hub for DA-100, DA-100L |
1 x | Starter Sullivan-STAR 603 DINATRON |
1 x | Glases Flitemaster |
2 x | 70 mm INO spinner (carbon imitation) |
1 x | Rubber wheel Ø 38mm x 13mm (2pcs) axis Ø 2.1mm |
5 x | Aluminun wheel collar 5 mm Ø (4 uds) |
1 x | Fail Safe air retract |
1 x | 28x16 BIELA propeller (3-blades) Corsair Scale |
1 x | CESSNA 182 1400 mm RTF |
1 x | Programador FUTABA USB CIU-3 |
1 x | Excentric gearbox for 3,2mm axis (2,33:1) |
1 x | Gearbox for VM motors (2,5:1) |
2 x | Fiberglass 163 g/m² 1m x 50 m (Aero, finish FK 144, plain) |
2 x | Kit repair carburator DLE-170 |
1 x | Propeller MEJLIK 29x10S |
1 x | Transmitter JETI Duplex DS-24 EX Carbon Line Dark RED Multimode |
1 x | DUPLEX R12 EPC receiver 2,4GHz |
1 x | 42,0 mm propeller (rigth propeller) |
1 x | AL Axle Shaft 4.0x16 mm (2 uds) |
1 x | CAM-Carbon Light Prop 10x4.5" (Prop right) |
2 x | Balsa panel 6.0x100x1000 mm |
1 x | AXI 2814/10 V2 Long |
1 x | STANDOFF GAS ENGINE MOUNT 38 mm |
1 x | Propeller 3BL 50 mm M4 Plastic |
1 x | Propeller APC 9x4.7 SF |
1 x | Spring pin Ø 2 x 6 mm (10 pcs) |
1 x | Carburator screw DA50/60/100/120 |
1 x | EDGE 540S 50E blue/red (SebArt) |
1 x | 33,0 mm propeller (rigth propeller) |
2 x | BALSA trip 2.0x2.0x1000 mm |
1 x | DC-3 Douglas (DAKOTA) 1800 mm Electric LG |
3 x | PVC transparent battery termo-retract 195 mm (1 m) |
1 x | Snap short M2 (10 uds) |
1 x | 13 mm wing servo holder |
1 x | 23x10 BIELA propeller |
2 x | Quicklock washer 3.5 mm (10 pcs) |
1 x | Blocking screws M6 gas engine |
1 x | Field folding model stand |
1 x | Plastic wheels 30 mm (2 pcs) |
1 x | Landing gear clamp for Ø 3 mm (4 uds) |
1 x | 10 mm aluminium spinner (Kavan) |
1 x | Avanti S Jet , Exhaust for JetCat P-140 (SebArt) |
2 x | EXCITE S400 Pylon |
1 x | Wots Wot Foam-E ARTF (Ripmax) |
1 x | Superlight deluxe wheel 62 mm (2 pcs) |
1 x | Neumatic retractable landing gear (Aero-Naut) |
3 x | Quicklock washer 2.5 mm (10 pcs) |
1 x | Screws 2,2 x 6,5 mm (20 pcs) |
1 x | SyRen 50A 6V-30V Regenerative Motor Driver |
1 x | Propeller APC 4.75x4.5 |
1 x | Propeller MENZ-S 18x6 |
1 x | AXI 2814/20 V2 |
2 x | Jeti Black cap |
1 x | Propeller MEJZLIK 20x13 Electric light (41 g) |
2 x | Quicklock washer 4 mm (10 pcs) |
1 x | Treaded hexagonal socket insert M3 Br (4 pcs) |
1 x | Foam wheel Ø 351 mm (2 pcs) |
1 x | WIND S 50E,White wheels pants (SebART) |
2 x | Carbon Non-Woven, 160 g/m² 127 cm 1 m |
2 x | Skywalker X8 FPV negro |
1 x | Mounting base Ms 8 mm |
1 x | Sukhoi 29S 140", White Landing gear(SebART) |
1 x | MEKP Harderner 100 g |
1 x | Hitec 20 mm servo arm |
1 x | 29x20D BIELA propeller |
3 x | Aluminun wheel collar 2 mm Ø (4 uds) |
1 x | L.Gear filled SUKHOI 29S 50E |
1 x | 3-blades 16x10 carbon prop Super Silence |
1 x | Wheel cover holder Ø 6 mm (2 uds) |
2 x | Battery FUTABA 18MZ |
4 x | 12.7 mm 2:1 black termoretract tube |
1 x | Jet Pipe for A-10 Skymaster (set 2 pcs) |
1 x | Servo TOPMODEL STANDARD S3217 |
1 x | Piston DLE 55/111/22 |
1 x | Air pressure gauge |
1 x | Savox Brushless Servo SC-1251 MG |
1 x | Window mounting channel 5m |
1 x | HM-16 "Pou du Ciel" (RBC Kits) |
1 x | Triple rod con. 3mm Pushrod (2 pcs) |
2 x | Anchor 25 mm (2 uds) |
1 x | CAM-Carbon Light Prop 11x5" (Prop left) |
1 x | Saito FG-36 motor support |
1 x | ALBATROS 3.0 m (orange/white) |
2 x | 4" - 102 x 45 mm Ø5 mm aluminium core wheel |
2 x | Screw M3x20 (10 pcs) |
2 x | THERMIK DREAM 3.000 mm (Topmodel) |
1 x | ZENOAH ZG 26SC with magneto ignition |
1 x | Servo-V-Limiter 5.2V |
1 x | 82 mm 12 mm axi 30 g F3A CF drilled spinner |
1 x | 3-blades 28x12 carbon prop Super Silence |
1 x | Komet Pump |
1 x | AXI 2808/16 V2 |
1 x | 89x32 mm (3.5") axle Ø5 mm aluminium core wheel |
1 x | Propeller APC 8x6 Electric |
2 x | Threaded coupler M2,5 (10 pcs) |
1 x | Male connector for 16 pines AWG |
1 x | Landing gear frontal support 29x26x13,5 |
1 x | Motor DLE 35 RA |
1 x | Propeller APC 12x6 Electric |
1 x | Indoor landing gear set |
1 x | Propeller Pleg CAM Carbon 13x6.5 |
1 x | Quick hose connector 3-3 mm |
1 x | AngelS 50E White/Green Fuselage(SebART) |
1 x | Covered closure or fairings |
1 x | Epoxy Resin L (2.5 Kg) |
1 x | Spring clamp for tube Ø29 mm ext 1pc |
1 x | Spare spinner 40/42 mm 3-Bl |
1 x | RX external cable for estandar receivers |
1 x | Variable Flow Smoke Pump System |
2 x | Cabling for Fox MDM1 wings |
1 x | 42 mm black plastic spinner for fixed propeller |
1 x | 45 mm white plastic spinner for folding propeller |
1 x | DUPLEX 2.4EX Satellite receiver Rsat 2 |
1 x | 50 mm aluminium spinner (Kavan) |
2 x | 18x10 BIELA pusher propeller |
1 x | PARAGON Trainer 46-55 1580 mm |
1 x | T-shape holder metal LAMA |
1 x | Breatex™ Non-woven absorber 150 g/m² Roll 20m |
2 x | Pushrod octagone 3/2 |
1 x | "S" set for planes |
1 x | Servo FUTABA HPS-A700 Digital S-Bus |
1 x | Propeller Pleg CAM Carbon 10x6 |
3 x | Steering arm 16 mm Ø 3 mm (2 uds) |
1 x | Turbofan 4000 |
1 x | Fod Guard 83x32 mm |
1 x | Central piece 42 mm 0º [12 mm] |
1 x | ALU double servo arm 3 mm shaft |
1 x | HPP-21 PLUS PC Programmer for Hitec Digital Servos |
1 x | Spinner propeller pleg. 45 mm / 4,0 mm |
1 x | SLICK 360-B 104" (2640 mm) |
5 x | VBar NEO |
1 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m |
2 x | Red aluminium double servo arm FUTABA 40 mm M3 F3A |
1 x | Stick coupler Ms 15 mm |
1 x | 7 mm gas motor standoff |
2 x | Fully Threaded Steel Rod alumin 40 mm M2,5 (2 pcs) |
2 x | 35x14 mm hard foam KOVO wheel (2 pcs) |
1 x | Needle bearing DLE55-RA |
1 x | Nut for mounting M4 (4 pcs) |
2 x | Muffler DLE-120 Right |
1 x | Propeller electric carbon 10.5x7 |
1 x | Sanyo RX Battery Eneloop 6,0 V JR |
1 x | Short ball link M2 (6 uds) |
2 x | 22x12D BIELA 3Bl propeller (3-blades) |
1 x | GROB G109 Elektro 2.770 mm |
1 x | 17x8 BIELA propeller |
1 x | Battery LiFe -2100/25C-3S 9.9V |
1 x | Aluminum Fold Prop Spinner 40 mm / 5mm |
1 x | Conector JAPAN G2 Set 5 pares |
1 x | Spinner 100 mm CFK |
1 x | 5 mm Prop Adapter M8 |
1 x | Straightened rod Ø 0.5 mm x 1000 mm |
1 x | Motor OS 3820-1200 electric |
1 x | 17x10 BIELA propeller SCALE (3-blades) |
1 x | Reed valve petal for DLE 111 |
1 x | Telemetry SPEKTRUM |
1 x | Avanti S 1.8m Jet FREECE TRICOLORI |
1 x | Pilatus PC-21, White cabine (SebArt) |
1 x | STEERING FRONT WHEEL SYSTEM BIDULE 111 |
1 x | Propeller MEJLIK 20x13 N-3 Blades |
1 x | Bidule 55 2460 mm Cabina |
1 x | Propeller Pleg CAM Carbon 12.5x6 |
1 x | Servo SAVOX SA-1256 TG |
1 x | Motor Mega AC 16/15/08 |
1 x | Servo digital 17g MG - Std |
1 x | wire tensioner (blue) |
2 x | Fiberglass 163 g/m² 1m x 20 m (Aero, finish FK 144, plain) |
2 x | Reed valve petal for DLE 120 |
1 x | Coupling for 3 mm axis |
1 x | Hexagonal Nut M2 (10 pcs) |
1 x | Carbon plate 350x150x3.0 mm |
1 x | Head Gasket 30cc (3 pcs) |
1 x | Spare white 30-36 mm spinner |
1 x | ODYSSEY Horns Set GFK |
1 x | Turnbuckle M2x22/35 (2pcs) |
1 x | Avanti XS Jet , Tank for Keroseno (SebArt) |
1 x | SAITO FG-36 carburetor |
1 x | Breatex™ Non-woven absorber 300 g/m² Roll 41 m |
2 x | Wheel 75 mm with electromagnet and brake disk (2 uds) |
1 x | Propeller APC 11x5.5 Electric |
1 x | Motor OS 3805-1200 electric |
1 x | 25x10 BIELA propeller (3-blades) Corsair Scale |
1 x | STD excentric gearbox for 3,2mm axis (3,0:1) |
1 x | Cover cap drop-shaped paintable 43 mm |
4 x | 6,4x1000 mm 2:1 red termoretract tube |
1 x | Snap long M2 (10 uds) |
1 x | Propeller Pleg CAM Carbon 12x9 |
2 x | Wheel collar 2 mm Ø (4 uds) |
1 x | Fiberglass plate 350x150x0.3 mm |
1 x | FESTO connector M7 Quick 6 mm |
1 x | Transmitter JETI Duplex DS-12 EX Multimod YELLOW |
1 x | Pilatus PC-21 50E, Yellow cabine (SebArt) |
1 x | Turnbuckle M2,5x32/48 (2pcs) |
1 x | Avanti S Jet , Vectorial Exhaust for JetCat P-180 |
1 x | Servoarm Aluminium SH-82 |
2 x | Brass rod Ø 1.0 mm x 1000 mm |
2 x | Civilian pilot "Pamela" size 9cm (Slimline) |
1 x | BAE HAWK Mini 1.29m MILITARY ARROW ARF +elec.L.Gear + 3 Microser |
1 x | 3-blades 24x12 carbon prop Super Silence |
1 x | Propeller APC 4.7x4.2 |
2 x | 15x7 tree blades propeller |
1 x | Propeller diller for EME35 and DLE35 |
1 x | Hexagonal Nut M2.5 (10 pcs) |
1 x | Black smoke bombs AX-60 (5 pcs) |
1 x | 75 mm spinner (Carbon Imitation) |
1 x | Birch plywood plate 600x300x3.0 mm |
2 x | Glider IKARUS |
2 x | Metal ball clevis M3 (10 uds) |
2 x | TA-183 "HUCKEBEIN" (RBC Kits) |
1 x | Crystal TX 35.050 Ch 65 |
2 x | Allen wheel collar M4x4 |
1 x | Carbon fiber flat 1000x3.0x0.5 mm |
2 x | Avia (Top Model) |
1 x | Propeller Pleg CAM Carbon 18x7 |
1 x | Propeller MENZ-S 19x8 |
1 x | DPSI Micro - DualBat 5.9V / 7.2V JR-JR (Dual Power Supply) |
1 x | Gas or Kerosene Refueling Dry-Break Ports w/Return Line |
1 x | White spinner propeller pleg. 50 mm / 6 mm |
1 x | Pipe Jet REVEL titanio/aluminio |
1 x | Motor Mount for TITAN ZG45 and ZG62, length 36 mm |
1 x | DPSI RV Mini 5 (2008) |
2 x | 20 mm tail wheel for 0,5-1 Kg models |
2 x | Carbon Non-Woven, 240 g/m² 100 cm x 5m |
1 x | AXI 5330/F3A V2 |
1 x | Lightweight aircraft wheel, 45x18.5x2 |
1 x | Propeller MASTER 7x6 |
1 x | Servo SAVOX SB-2290 SG |
4 x | PVC transparent black termo-retract battery 185 mm (1 m) |
5 x | 165 mm PVC transparent battery termo-retract 165 mm (1 m) |
1 x | Cable grommet 9.5 mm (4 uds) |
1 x | Motor D.A. 200 Magnesium |
1 x | Servo JETI DSHV 3D13T (13 Kg) |
1 x | Sanyo RX Battery Eneloop 4,8 V JR |
1 x | Pinion 11 - 3,2 mm |
1 x | Transmitter Stick Ends V2 Red - M3 (2 pcs) |
1 x | KABRIOLIN 3D Electric 1.4m |
2 x | Cable grommet Ø 4 mm (4 uds) |
2 x | Motor Mega AC 16/10/03 RACE |
1 x | Adjustable brass horn threaded M3 |
2 x | Brass control horn M2 large for wire (2pcs) |
2 x | Horn 6/20 with M3 Bearing |
1 x | Brass control horn M2 long for wire (10pcs) |
2 x | Brass control horn M4 short for wire (4 pcs) |
1 x | Horn F3A de Titanium 16 mm (2 units) |
2 x | 6 mm blue aluminium threaded horn with patella |
2 x | Duralumium F3A horn 30x10x23,5 mm (2 pcs) |
1 x | 6 mm aluminium horn with patella |
1 x | Cable control set |
2 x | Horn 20x28,5 mm (2 pcs) |
1 x | Brass control horn M4 short for wire (10pcs) |
1 x | Cable with accesories |
1 x | Horn with ball 40x30 |
2 x | Horn DU-BRO 1/2 (2 pcs) |
1 x | Brass control horn M4 long for wire (4 pcs) |
2 x | 5 mm M2 variable inclined horn |
2 x | Horn 6/27 with M3 Bearing |
1 x | 6 mm M3 variable horn |
1 x | Horn micro type4 Ø 0,5 (2 pcs) |
2 x | Control horn long w/ball |
2 x | Extra long horn 60x30 |
2 x | Horn 6/35 with M3 Bearing |
1 x | 6 mm M3 variable inclined horn |
2 x | 6 mm red aluminium threaded horn with patella |
1 x | Brass control horn M2 short for wire (2 pcs) |
1 x | Horn 16,5x20 mm (2 pcs) |
1 x | Horn 13,5x16 mm (2 pcs) |
1 x | 5 mm M2 variable horn |
2 x | Horn with ball 55x40 |
2 x | Horn DUBRO 1/2A |
2 x | Horn 5/10 with M2 Bearing |
1 x | Horn 5/15 with M2 Bearing |
1 x | Horn 5/20 with M2 Bearing |
2 x | Extra-long adjustable aluminium control horn 2,8x34 |
3 x | 58 mm PVC transparent battery termo-retract 68 mm (1 m) |
2 x | SE Ring 400 mm (2 pcs) |
1 x | Extension silicon 25 cm (Futaba) |
1 x | Paramotor Trike XL |
2 x | XH female balance (6S) connector (2 pcs) |
1 x | USB Interface Adapter |
2 x | Steel tube (L 1000 mm Ø7 mm, Ø6,7 mm) |
2 x | PVC termo-retract battery 45 mm transparent orange (1 m) |
1 x | Connectors MPX black female |
2 x | Steel tube (L 1000 mm Ø4 mm, Ø3,7 mm) |
1 x | Spring lock washer 2.1 mm (20 pcs) |
1 x | Switch Cap M (red) |
1 x | Compact on-board starting system (9525) |
1 x | METEOR 1.000 mm kit |
1 x | Battery LiPo GENS 6500 mAh 3S 11,1V 60C (Gens Ace) |
1 x | Anchor 50 mm (2 uds) |
2 x | SUPER DIMONA TC-80 |
1 x | Cabel PVC 2 x 0.25 mm2 (5 m) red-black |
2 x | Conector JR/Uni Servo female BLUE silicon (10 pcs) |
1 x | ABS tube 5.0x4.0x156 mm |
1 x | Micro screw-lock pushrod conn snap Ø 1 mm (2 uds) |
1 x | |
1 x | Streamline Stainless Steel Tubing 9.0x5.0x1000 mm |
1 x | Connectors banna oro 8,0 mm 5 pcs(Female) |
1 x | Vacuum pump P1-N |
1 x | Carbon servo arms for HITEC HS 65 (4 pcs) |
1 x | Servo HITEC HS-5645 MG Digi |
4 x | |
1 x | Extension silicon 30 cm male (Graupner) |
1 x | Profile ABS half cane 3x1000 mm |
1 x | Anodized aluminium servo M4x5/8 screw (4 red pcs) |
2 x | PVC lilac battery termo-retract 70 mm (10 m) |
1 x | Silicone black 0,5 qmm wire ( 25 m) |
1 x | Servo Digital HITEC HS-5035 HD |
1 x | Ball link M3 RPA's-UAV's |
3 x | SE Ring 200 mm (2 pcs) |
2 x | 5 LiPo XH>EH adapter |
1 x | VAGABOND 1500 mm ARF V2 (Blue) |
1 x | Connector CAN 15 |
1 x | SE Ring 300 mm (2 pcs) |
1 x | Protective open Cover for wires Ø 13 mm 1000 mm |
1 x | Protector Connector MPX (1 pair) |
3 x | XH female balance (3S) connector (2 pcs) |
1 x | Carbon tube (L 1000 mm, Ø5 mm, Ø3 mm) |
3 x | SE Ring 250 mm (2 pcs) |
1 x | Fully Threaded Steel Rod alumin 90 mm M3 (2 pcs) knurled |
4 x | 1,6x1000 mm 2:1 red termoretract tube |
1 x | Super Light Wheels(Sponge Tyre) Ø 60mm x 21mm (2pcs) axis Ø 4.0m |
1 x | Fabric scissors curved (offset handles), 16 cm / 6" length |
1 x | Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH |
1 x | 43x14 mm hard foam KOVO wheel (2 pcs) |
1 x | 18 mm reinforced hinge |
1 x | Balsa panel 2.5x100x1000 mm |
1 x | Cable set PREMIUM, fuselage/wing |
1 x | Cable grommet Ø 3.2 mm (4 uds) |
1 x | 127x43 Ø6.0 mm aluminium core wheel |
3 x | XT-60 connector (female) |
2 x | Carbon fiber rod 10 mm x 1000 mm |
4 x | XH female balance (2S) connector (2 pcs) |
2 x | Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm) |
2 x | 80x40 mm hard foam KOVO wheel |
2 x | Round Rod 2,5x1000 mm |
2 x | Extension silicon 50 cm (Graupner) |
2 x | silicon 100 cm Futaba Extension Ø 0,35 mm |
1 x | Wing bolts M3 Steel screw Red (2 pcs) |
2 x | Suport PITOT |
1 x | XH female balance (8S) connector (2 pcs) |
1 x | Handle for PERMAGRIT lime |
2 x | Steel tube (L 1000 mm Ø6 mm, Ø5,7 mm) |
1 x | Streamline Stainless Steel Tubing 10.5x5.7x1000 m |
1 x | Propeller balancer |
1 x | Thinwall Stainless Steel Tubing 28x0.6x1000 mm |
1 x | Gold antispark 5,5 mm plug |
1 x | Wheel FEMA 140 mm / 6 mm |
1 x | PVC termo-retract battery 95 mm blue transparent (1 m) |
1 x | Lunak ARF 2000 mm Yellow (Hacker Model) |
1 x | Vacuum Connection VA 1 (for hose Ø 6 mm) |
2 x | Absorver mount set for 5-10 Kg models |
1 x | Transmitter JETI Duplex DS-12 EX Multimod BLACK |
1 x | TP/TopFuel - JST-EH 4/5S Adapter |
1 x | Servo HITEC HS-5085 MG Digi |
1 x | Pilot "Anthony" (Slimline) |
1 x | BEC 3A FOXY |
1 x | Ferrita con funda |
1 x | XH female balance (4S) connector (2 pcs) |
3 x | PBY 6/6A Catalina, Observer´s dome (L + R) |
1 x | Balsa panel 1.0x100x1000 mm |
1 x | ABS tube 8.0x7.0x1000 mm |
1 x | 1,2x1000 mm 2:1 red termoretract tube |
1 x | Motor A2212/13T |
1 x | 3l Smoke oil |
1 x | Wheel FEMA 112 mm / 6 mm |
3 x | Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs) |
1 x | Red silicone 1,0 qmm wire (50 m) |
2 x | SE Ring 330 mm (4 pcs) |
1 x | EDGE 540-A 91" (2310 mm) |
1 x | Transmitter Balancer Futaba V |
1 x | Protective Cover for wires Ø 6 mm 1000 mm |
1 x | Squared carbon wing joinner 5x5x220 mm |
1 x | 44.5x17 mm (1.75") Type jets aluminium core wheel |
1 x | Steel tube (L 1000 mm Ø8 mm, Ø7,7 mm) |
1 x | Jet Afterburner Simulator NF-Jet3 YSW |
1 x | Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH |
2 x | SIG Coverall 1.2x4.5 m |
1 x | Balanceradapter JST-XH (Heli 47G) 2-6 c. |
1 x | 31,0 mm propeller (rigth propeller) |
1 x | Silicone 0,14 qmm servos wire Graupner (100 m) |
1 x | 45 mm rods + T patellas set for direction control |
1 x | Z Bender - S Type Tool |
1 x | ABS tube 7.0x6.0x1000 mm |
1 x | Switch Cap M (blue) |
1 x | Fox MDM 1 6000 mm |
1 x | Starter 12v (Max 90 and 15ccm) |
1 x | Extension S-Bus 1-2 silicon 120 cm FUTABA |
1 x | Extra Hard Titanium Herxagon Screwdrivers |
1 x | F-104 Starfighter Y/B Aniversary(SebArt) |
1 x | Motor A60-5XS V4 28-pole kv420 |
1 x | Astra wing Joinner (Top Model) |
1 x | Fiberglass plate 620x540x0,3 mm |
1 x | Cabel "Y" 30 cm (graupner) |
1 x | Blue Aluminium double servo arm V3-Hitec 3-3,5inch |
1 x | Connectors banna oro 0,8 mm (M/F) |
1 x | LED blink wire flashing (green - 2pcs) |
5 x | Swift ARF 2000 mm Red (Hacker Model) |
1 x | Jet Afterburner Simulator NF-Jet2YY Set |
1 x | Black silicone 1,0 qmm wire (50 m) |
1 x | Profile ABS half cane 5.0x1000 mm |
2 x | 2,5x60 mm allen screwdriver |
1 x | Lock washer 2.7 mm (20 pcs) |
2 x | Futaba Radio Case |
1 x | Extension silicon 10 cm (Futaba) |
1 x | Rudder 2_Tray 4~4.5 inch |
2 x | MPX Support |
2 x | 19 mm 2:1 black termoretract tube |
1 x | Thixotropic agent TM 100, tin/ 415 g (approx. 5 l) |
1 x | Dremel PERMAGRIT 18 mm round lime |
1 x | Servo HITEC D951 TW |
1 x | Profile ABS triangular 2.0x1000 mm 90º |
1 x | LH long aluminium horn L31xH30 (2pcs) |
1 x | Blue aluminium servo arm V2-Hitec 1,5 inch M3 |
1 x | Red copper lacquer wire Ø0,2 mm (5 m) |
1 x | Stainless steel cable Ø 0.5 mm (20 m) |
1 x | 300 Newtons FEMA absorber |
1 x | Round flex hinge (12 uds) |
1 x | Vest clothes Hispano Aviación |
2 x | Conector JR Servo male (10 pcs) |
1 x | ABS tube 7.0x5.0x1000 mm |
1 x | ABS "T" angle 6.0x6.0x1000 mm |
2 x | Wing connector 8pin with pin strip, plug & socket |
2 x | 2,0x50 mm allen screwdriver |
3 x | 12,7x1000 mm 2:1 green termoretract tube |
1 x | Fascination 3600 mm (Top Model) |
1 x | Black spiral protective cover for wires Ø 0,5/50 mm - 25 m |
1 x | Mini Avanti S 1.4m white/red |
1 x | Servo HITEC HSB-9380TH |
1 x | Ball Link Plier |
1 x | ABS tube 6.0x5.0x1000 mm |
1 x | 12 mm floating pad (49 pcs) |
1 x | ABS tube 12.0x10.0x1000 mm |
1 x | Carbon tube (L 2000 mm, Ø12 mm, Ø10 mm) |
1 x | JR silicone servo wire 0,35 qmm / 5m |
2 x | Cinta Goldfix 1m |
1 x | Pine wood slat 10x10x1000 mm |
2 x | 20x1000 mm Ring Strap Back To Back |
1 x | 3 mm Leader (L 100 mm) |
1 x | PVC 0,14 qmm servos wire JR/Graupner (5 m) |
1 x | Streamline Stainless Steel Tubing 7.5x4.5x1000 mm |
4 x | 4,8x1000 mm 2:1 black termoretract tube |
1 x | Small aluminium horn red (2pcs) |
1 x | Aluminium tube (L 1000 mm, Ø5.0 mm, Ø4.1 mm) |
1 x | Dean-T Plug Mold |
1 x | Turbine KingTech K30G Restart |
1 x | Red aluminium servo arm V2-Futaba 1,5" inch M3 |
1 x | NF-3XL set |
1 x | Indoor hinge with servo arm integraded |
1 x | 76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs) |
2 x | XH male balance (8S) connector (2 pcs) |
1 x | SEBART 30E, White wheel pants (SebART) |
1 x | Charger HITEC CG-42 TX 7.2v/ RX 4.8v (80 mA) |
1 x | Blind nut M6 (4 pcs) |
1 x | Red aluminium double servo arm FUTABA 2,5inch M3 |
1 x | 30 cm BEC cable (male) |
1 x | Gates hinge black 30x16 mm (2 pcs) |
1 x | Militarian pilot "Fly Boy" size 9cm (Slimline) |
1 x | ABS "T" angle 4.0x4.0x1000 mm |
1 x | Wing conexion 2 servos JR/Graupner 50 cm |
1 x | Cable silicona macho batt. receptor 30 cm (Futaba) |
1 x | M2,5 Diam metal short ball link V3 (2 pcs) |
1 x | Beech dowels 4.0 x 1000 mm |
1 x | Steering arm 12 mm Ø 3 mm (2 uds) |
2 x | ABS Strip 1.5x8.0x1000 mm |
1 x | Poerfly |
1 x | 100 mm rods set for direction control |
1 x | Protective Cover for wires Ø 10 mm 1000 mm |
2 x | XT-30 connector (pair) |
1 x | SLICK 360-A 104" (2640 mm) |
1 x | Nylon hinge 20x15x0,3 (10 pcs) |
1 x | Hot Glue Stick BLACK |
1 x | MPX screwable clips (5 pcs) |
2 x | Steel tube (L 1000 mm Ø5 mm, Ø4,7 mm) |
1 x | 39,0 mm propeller (left propeller) |
1 x | 1,5x50 mm allen screwdriver |
1 x | MPX-Dean "T" Adapter |
1 x | Anodized alum. M3x0,5x20 mm Flat Head screw (4 blue pcs) |
1 x | Servo HITEC HSB-9360TH |
1 x | Vacuum bag, 1200 mm x 50 m |
1 x | Fast attachment for servos (25 pcs) |
2 x | 20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
1 x | ABS tube 9.0x7.0x1000 mm |
1 x | Prop Shaft Adapter 6 mm/M8 "long" 35 mm |
1 x | Carbon fibre tape 200 g/m² (unidirectional) 50 mm |
1 x | Ventus 1:4 set of instruments |
2 x | Conector JR Servo male (10 pcs) |
1 x | F-104 Starfighter USAF (SebArt) |
1 x | ABS tube 10.0x8.0x1000 mm |
1 x | Opale Rucksack |
2 x | SIG Coverall 1.2x0.9 m |
1 x | X-RAY Micro QR (Elevator) |
1 x | Nose wheel 62 mm |
1 x | Red aluminium servo arm V3-Futaba 3,5inch |
1 x | Antena FUTABA 35 mhZ 3PM/3FRF/4V/4Y/6EX/6X/6Y/7C |
1 x | Ka 8 B (Top Model) |
1 x | HPP-21 PLUS PC Programmer for Hitec Digital Servos |
1 x | Red aluminium servo arm V3-Futaba 1,0inch |
1 x | 115x29 mm (4.50") Type jets aluminium core wheel |
1 x | Connectors MPX black male |
1 x | Servo HITEC D950 TW |
1 x | Propeller POWER-PROP 7x7 |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø25 mm, Ø22.5 mm) |
1 x | Blue aluminium double servo arm V3-Hitec 3,5inch |
1 x | Medium pin type hinge (12 uds) |
1 x | Extractor piñones 2.3/3.2 mm |
2 x | Conector JR Servo female (10 pcs) |
1 x | HITEC DPC-11 programmer |
1 x | Carbon fiber rod 0.5 mmx1000 mm |
2 x | MPX Support (2 pcs) |
2 x | PVC red battery termo-retract 68 mm (10 m) |
1 x | Silicone 0,50 qmm servos wire Graupner(100 m) |
1 x | Strip 3,5x1,75x330 mm |
1 x | Tape GFK 38 mm |
1 x | SEBART 30E YELLOW/BLACK Landing Gear(SebART) |
1 x | Carbon tube 3K-PW (L 2000 mm, Ø14 mm, Ø12 mm) |
1 x | 1 m servo "Premium" wire (white/red/blue) |
2 x | MPX screwable clips (4 pcs) |
2 x | Conector FUTABA Servo male (10 pcs) |
1 x | Servo HITEC HS-65 MG |
1 x | Charger FUTABA SQN30W12P-08 220v |
1 x | TrainerCord (master-learner) |
1 x | Aluminium tube (L 1000 mm, Ø4.0 mm, Ø3.1 mm) |
1 x | 76 mm light wheels (2 pcs) |
1 x | Protective Cover for wires Ø 3 mm 1000 mm |
1 x | "Y" charging 4mm wire (2 IN-1 OUT). |
1 x | Teacher-student connector T12FG/FX-30 |
1 x | Camera Sony 4140+673 CCD with Built-in 200mw TX + antenna |
1 x | XH male balance (7S) connector (2 pcs) |
1 x | Nylon hinge 20x20x0,3 (10 pcs) |
1 x | XH female balance (9S) connector (2 pcs) |
1 x | Silicone red 0,5 qmm wire ( 1 m) |
1 x | Brass hexagonal rod Ø 3 mm x 1000 mm |
2 x | XH male balance (6S) connector (2 pcs) |
1 x | Hard brass tubing (L 1000 mm, Ø2.0 mm, Ø1.2 mm) |
1 x | Strut Set HAWKER HUNTER 1:5,8 (without wheels) |
2 x | 22 mm Cut Disc Proxxon/Dremmel |
1 x | Straightened rod Ø 2.0 mm x 1000 mm |
1 x | M3 Maxi ball link (2 uds) |
1 x | 73x24 mm hard foam KOVO wheel (2 pcs) |
1 x | Red aluminium servo arm V1-Futaba 15 mm iM2 |
1 x | Green silicone 0,25 mm² wire (25 m) |
1 x | LED wire (green - 2pcs) |
1 x | 67 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs) |
1 x | DG-303 ACRO 3750 mm, canopy |
1 x | Hard brass tubing (L 1000 mm, Ø10.0 mm, Ø9.1 mm) |
1 x | 1/6 Pilot "Tony" |
1 x | Streamline Stainless Steel Tubing 14.5x9.6x1000 mm |
1 x | Ball link M3 (10 pcs) |
1 x | Silent-blocks DLE 170M |
1 x | Optotronix Aurora Plug |
1 x | Anodized alum. M4x0,7x20 mm Flat Head screw (4 blue pcs) |
1 x | Servo HITEC HS-5125 MG Slim Metal Gear Wing Servo |
1 x | Challenger ARF (Top Model) |
1 x | Glider STROLCH |
1 x | Servo HITEC HS-5475 HB Digi |
1 x | Profile ABS half cane 2.0x1000 mm |
3 x | PVC blue transparent battery termo-retract 68 mm (10 m) |
1 x | 3,0x60 mm allen screwdriver |
1 x | PVC 0,14 qmm servos wire Hitec/Mpx (5 m) |
1 x | Aluminium rod Ø 4.0 mm x 3000 mm |
1 x | Lite Plywood panel 600x300x2.0 mm |
1 x | ABS angle 5,0x5,0x1000 mm |
1 x | Conector JR Servo female (10 pcs) |
1 x | Quicklock washer 1.5 mm (10 pcs) |
2 x | PBY 6/6A Catalina (aero-naut) |
2 x | Cross Connector 4.0 mm x 1000 mm |
1 x | Mig-25 "FOXBAT" (RBC Kits) |
1 x | 3 mm Prop Adapter M6 |
1 x | Hot Glue Stick GREEN |
3 x | 2,4x1000 mm 2:1 black termoretract tube |
1 x | X-RAY Micro QR (Tail Tube) |
4 x | Compact on-board starting system (9724) |
1 x | Small aluminium horn gold (2pcs) |
1 x | Servo arms set HS-60/81/85/5082MG/5085mg |
1 x | Big Crow DLE-170M |
1 x | Hard brass tubing (L 1000 mm, Ø7.0 mm, Ø6.1 mm) |
1 x | LED wire (rojo - 2pcs) |
3 x | PVC termo-retract battery 45 mm black transparent (1 m) |
1 x | Streamline Stainless Steel Tubing 15.5x8.5x1000 mm |
2 x | MPX Sub-D Adaptor |
1 x | A/C quality beech plywood 600x300x0.8 mm |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø12 mm, Ø8 mm) |
1 x | Brass rod Ø 1.5 mm x 1000 mm |
1 x | Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm) |
1 x | Teflon rollers 40 mm x 15 mm Diam. |
1 x | Carbon fiber rod 7.0 mmx1000 mm |
1 x | Carbon rectangular rod 3.0 mm x 1.0 x 1000 mm |
1 x | Chili Race F3K (aramid nose) |
1 x | Concave-Convex sandpaper file 13 mm |
1 x | Servo arms set HS-65HB/MG/5065MG |
1 x | Wing-connector: Glass / Carbon tube (13.7/12.5) x 1000 mm |
2 x | 4,8x1000 mm 2:1 red termoretract tube |
1 x | Glases Stratus |
1 x | Straightened rod Ø 1.0 mm x 1000 mm |
2 x | Wing connector 8pin with pin strip, plug & socket |
1 x | Oracover Brown 2 m |
1 x | Red aluminium servo arm V1-Futaba 1,25" inch M3 |
1 x | Spinner propeller pleg. 30 mm/5,0 mm/0º |
3 x | 4,8x1000 mm 2:1 blue termoretract tube |
1 x | 4Wx2 Power Navigation Light, 13mm, T-Fuse White |
1 x | SlowFlyer control horn (3 pcs) |
3 x | Ply-Span 450x600/13g Orange |
1 x | Connectors MPX female (PIN double) |
1 x | Threaded coupler ALU Left M2,5 Ø 3 (2 uds) |
1 x | Ion Pro, Elevator (JP Model) |
1 x | Carbon fiber rod 20 mmx1000 mm |
1 x | Short adjustable control horn 3x24 |
1 x | Red aluminium servo arm V3-Futaba 1,25inch M3 |
1 x | Landing gear axle Ø 6 mm (2 uds) |
1 x | 1,6x1000 mm 2:1 black termoretract tube |
2 x | 30 cm BEC cable (female) |
1 x | 45 mm rods set for direction control |
1 x | Ion Pro, Canopy (JP Model) |
1 x | ZERO Figther A6M52 93", Electric retract Landing gear ELECTRO |
1 x | MULTIPLEX ALUMINUM CASE "M-LINK" |
1 x | Red 4 mm connector holder |
1 x | Antenna Hole Cap V1 (Silver) |
1 x | Extension silicon 75 cm (Graupner) |
2 x | Steel tube (L 1000 mm Ø9 mm, Ø8,7 mm) |
1 x | ALU servo arm 90º 3 mm shaft |
1 x | Hard brass tubing (L 1000 mm, Ø18.0 mm, Ø16.0 mm) |
1 x | Protective Cover for wires Ø 6 mm 1000 mm |
1 x | M2/M1/6 3Diam short black ball link V1 (2 pcs) |
2 x | Ply-Span 450x600/13g Red |
1 x | Conector FUTABA Servo female (10 pcs) |
1 x | ABS tube 9.0x8.0x1000 mm |
1 x | Servo HS-5765MH High Voltage |
1 x | Red aluminium servo arm V3-Futaba 1,5inch M3 |
1 x | 110x55 mm SLH KOVO wheel |
1 x | 12x6 tree blades propeller |
1 x | Savox Highvoltage Brushless Servo SB-2272MG (Tail rotor) |
1 x | Profile ABS Square 3 x 1000 mm |
1 x | Connectors MPX 8 pins with support (black) 1 pair (male-female) |
1 x | Sealing Iron Sleeve PROF |
1 x | ABS tube 4.0x3.0x1000 mm |
1 x | Vacuum pump 12 CFM |
1 x | Breatex™ Non-woven absorber 150 g/m² Roll 5 m |
1 x | Kwik link unmount tool |
1 x | KingTech K45TP G4 Turboprop |
1 x | Servo HS-5070 MH Hi Volt |
1 x | Pin type hinge Al 3,0x50 mm (2 pcs) |
2 x | PVC blue transparent battery termo-retract 95 mm (1 m) |
1 x | Cabel "Y" 30 cm (Futaba) |
4 x | 6,4x1000 mm 2:1 black termoretract tube |
1 x | ABS tube 2.0x1.0x1000 mm |
1 x | Digital weight, angle and balance meter BASIC |
1 x | Futaba Female 40 cm extension |
1 x | Ferrita 27x14x7 mm |
1 x | Silicone red 0,75 qmm wire ( 25 m) |
1 x | Motor EME 70 cc |
1 x | XH male balance (4S) connector (2 pcs) |
1 x | Compact on-board starting system (9512) |
1 x | Black silicone 0,25 mm² wire (25 m) |
1 x | Fabric scissors curved Premium, 16 cm / 6" length |
1 x | PVC transparent battery termo-retract 51 mm (1 m) |
1 x | ABS angle 10,0x10,0x1000 mm |
1 x | Straightened rod Ø 4.0 mm x 1000 mm |
1 x | Beech dowels 2.0 x 1000 mm |
1 x | BABY glider (Aero-naut) |
1 x | Extension silicon 25 cm (Graupner) |
1 x | RH long aluminium horn (2pcs) |
1 x | Red aluminium servo arm V2-Futaba 1,25" inch M3 |
1 x | Extension silicon 30 cm female (Futaba) |
1 x | PVC yellow transparent battery termo-retract 68 mm (1 m) |
1 x | Heli blades angle measurer |
1 x | 100 mm rods + T patellas set for direction control |
1 x | 25,0 mm 3-BL M4 hydro-propeller (left hydropropeller) |
1 x | XH female balance (5S) connector (2 pcs) |
1 x | Extension silicon 100 cm (Graupner) |
1 x | HERON RR |
1 x | ABS Strip 1.5x4.0x1000 mm |
2 x | Steel tube (L 1000 mm Ø3 mm, Ø2,7 mm) |
1 x | UBEC 6A KAVAN |
1 x | Strip ABS 2.0x3.0x1000 mm |
1 x | Gates hinge aluminium (1 pcs) |
1 x | Round Rod 4,0x1000 mm |
1 x | 140 mm rods set for direction control |
1 x | Super Light Wheels(Sponge Tyre) Ø 55mm x 19mm (2pcs) axis Ø 3.5m |
1 x | PROMETHEUS 50E Yellow/Black |
1 x | LED wire (white - 2pcs) |
1 x | Streamline Stainless Steel Tubing 17.8x12.4x1000 mm |
1 x | 11 mm Rubber pads (14 pcs) |
1 x | PVC 0,14 qmm servo wire Futaba (5 m) |
1 x | Threaded coupler ALU Left M3 Ø 4 (2 uds) |
1 x | Wing bolts M3 Steel screw blue (2 pcs) |
1 x | ABS 500 x 400 x 0,5 mm (white) |
1 x | Protective Cover for wires Ø 20 mm 1000 mm |
1 x | Extension silicon 35 cm (Futaba) |
1 x | Cap Hispano Aviación |
1 x | Navaho new design (Top Model) |
2 x | 3,2x1000 mm 2:1 red termoretract tube |
2 x | XH LiPo extension lead |
1 x | Threaded coupler ALU Left M2,5 Ø 4 (2 uds) |
1 x | Yellow smoke canister 100 g |
1 x | Brass rod Ø 0.5 mm x 1000 mm |
1 x | Glases Nimbus "Black" |
1 x | Carbon tube 3k-LW (L 2000 mm, Ø30 mm, Ø26 mm) |
1 x | 80 mm rods set for direction control |
1 x | Banna gold connector 2,5 mm (M/F) |
1 x | Wheel FEMA 82 mm / 5 mm |
1 x | Xplorer1 anemometro |
1 x | Silicone 0,35 qmm servos cable Futaba (5 m) |
1 x | Wheel collar 5 mm Ø (4 uds) |
1 x | Round Rod 1,5x1000 mm |
1 x | Linden wood slat 3.0x3.0x1000 mm |
1 x | Propeller RABOESCH.Ms 20mm/M3r 5-BL (rigth hydropropeller) |
1 x | Canopy F9F Panther (Aero-naut) |
1 x | OBECHI sheet 2.0x3.0x1000 mm |
1 x | A/C quality beech plywood BIRCH 600x300x1.0 mm |
4 x | 1,2x1000 mm 2:1 black termoretract tube |
1 x | Transmitter Balancer HITEC Aurora 9, JR and Spectrum (blue) |
1 x | Chili F3K 2 wing servo mounted |
1 x | Red 3m5 mm connector holder |
1 x | ABS "T" angle 8.0x8.0x1000 mm |
1 x | Servo HITEC HS-485 HB |
1 x | 105 mm PVC transparent battery termo-retract 68 mm (1 m) |
1 x | Xplorer2 anemometro |
1 x | Servo HITEC HS-5805 MG Digi |
1 x | BALSA trip 5.0x5.0x1000 mm |
1 x | Extension silicon 30 cm male (Futaba) |
1 x | ABS 500 x 400 x 1 mm (white) |
1 x | Round Rod 3,0x1000 mm |
1 x | XH male balance (2S) connector (2 pcs) |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø22 mm, Ø20 mm) |
1 x | Carbon tube 3K-PW (L 2000 mm, Ø40 mm, Ø37 mm) |
1 x | Blue aluminium servo arm V3-Hitec 1,0inch M3 |
1 x | Rubber profile 8-2 mm 2M |
1 x | 2 mm Prop Adapter M6 |
1 x | XH male balance (5S) connector (2 pcs) |
1 x | SOLOFOX 5m Voll-GfK |
1 x | Servos security connector (2 pcs) |
1 x | Wheel Ø 75 mm (1 ud) Electron Retracts |
1 x | Pin type hinge Al 3,0x50 mm demount (2 pcs) |
1 x | Glases Nimbus |
1 x | NF-1 RC set |
1 x | Rubber profile 10-2 mm 2M |
1 x | Savox HV Brushless Servo SB-2270SG (Swashplate) |
1 x | Connectors MPX male |
1 x | Banna gold connector 2,5 mm (100 M/F pairs) |
1 x | Futaba male 40 cm extension |
1 x | Gold antispark 4 mm plug |
3 x | 2,4x1000 mm 2:1 red termoretract tube |
2 x | SE Ring 350 mm (2 pcs) |
1 x | ABS tube 3.0x2.0x330 mm |
1 x | Brass hexagonal rod Ø 4 mm x 1000 mm |
2 x | Wing-connector: Glass / Carbon tube (26.5/25 x 25/23) x 1000 mm |
1 x | Pilot "Adolf" Legends Series (Slimline) |
1 x | CF tube (L 1000 mm Ø0,7 mm, Ø0,3 mm) |
1 x | Flat washer 4.3 mm (20 pcs) |
1 x | White silicone 0,25 qmm wire (100 m) |
1 x | XH male balance (3S) connector (2 pcs) |
1 x | ABS Strip 1.0x2.0x1000 mm |
1 x | Carbon fiber rod 8.0 mmx1000 mm |
1 x | Round Rod 5,0x1000 mm |
2 x | PVC yellow-orange transparent battery termo-retract 57 mm (1 m) |
1 x | Electric spoiler 250 mm (2 pcs) |
1 x | Jet Afterburner Simulator NF-Jet2 |
1 x | Small pinned hinge (12 uds) |
1 x | Servo HITEC HS-70 MG |
1 x | RB-45 Electronic |
1 x | Aluminium cap bolt washer M4 blue (8 pcs) |
1 x | DUPLEX USBa USB-Adapter for Jeti Duplex Items |
1 x | Pine wood slat 2.0x2.0x1000 mm |
1 x | Servo Tester |
1 x | 28x10 BIELA propeller |
1 x | Rubber profile 6-2 mm 2M |
1 x | Copper lacquer wire Ø0,2 mm (5 m) |
1 x | ABS "T" angle 10.0x10.0x1000 mm |
1 x | APM2.6 Power module with 5.3V DC BEC |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø12 mm, Ø8 mm) |
1 x | quality beech plywood BIRCH 600x300x2.0 mm |
1 x | Transmitter Balancer Futaba T-10CG |
1 x | Aluminum Bayonet / strongal D25 mm / 1 m |
1 x | Profile ABS triangular 4.0x1000 mm 60º |
1 x | Receiver DUPLEX REX 3 A20 2.4 GHz |
1 x | Anodized aluminium servo M4x5/8 screw (4 silver pcs) |
1 x | Blue aluminium servo arm V3-Hitec 1,5inch M3 |
1 x | Wheel 38 mm V2 |
1 x | 73x24 mm hard foam KOVO wheel with bearing (2 pcs) |
1 x | Balsa panel 10x100x1000 mm |
1 x | 8Wx2 Navigation & Strobe, 11mm, T-Fuse Red/White |
1 x | Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm) |
1 x | Connectors MPX male (PIN double) |
1 x | Blue aluminium double servo arm HITEC 40 mm M3 F3A |
1 x | SCHARNHORST accessories |
1 x | Metal clevis M3 (10 uds) |
1 x | Cylidric hinge 33 mm Ø 2 mm (5 pcs) |
1 x | L-Connector 4.0 mm x 1000 mm |
1 x | Chili Race F3K 2 wing servo mounted(carbon biax) |
1 x | 140 mm rods + T patellas set for direction control |
1 x | Servo HITEC HS-45 HB, servo box |
1 x | ABS angle 4,0x4,0x1000 mm |
1 x | Extension S-Bus 1-2 silicon 30 cm FUTABA |
1 x | CM-3 |
1 x | Yellow smoke bombs AX-60 (5 pcs) |
1 x | 3 copper lacquer wire Ø0,2 mm (1 m) |
2 x | XH male balance (9S) connector (2 pcs) |
1 x | Militarian pilot "Kamikaze" size 9cm (Slimline) |
1 x | Elevator VENTUS 2cx 4.5m |
1 x | 6 mm Prop Adapter M8 |
1 x | 7 Servo SET 9g DS MG + Full servo extension cable set for Avanti |
1 x | Protective Cover for wires Ø 15 mm 1000 mm |
1 x | NF-2 RC set |
1 x | Profile ABS triangular 6.0x1000 mm 90º |
1 x | Unmounted aluminium pin 6x98 mm (2 pcs) |
1 x | Carbon tube (L 1000 mm, Ø22 mm, Ø21 mm) |
1 x | White large kwik link (10 pcs) |
1 x | Silicone 0,35 qmm servos wire Futaba (100 m) |
1 x | ABS tube 6.0x4.0x1000 mm |
1 x | MYSTIQUE 2.9 m ARF |
1 x | PVC 0,14 qmm servos wire Graupner (100 m) |
1 x | Connectors banna oro 2 mm (M/F) |
1 x | Pilot "Goose" (Slimline) |
1 x | Cabel charger transmitter GRAUPNER |
1 x | Futaba Neckstrap |
2 x | Steel tube (L 1000 mm Ø12 mm, Ø11,7 mm) |
1 x | Brass rod Ø 0.8 mm x 1000 mm |
1 x | NF-3X-80 liner Kit |
1 x | 10 mm Quick clamp_L (6 pcs) |
1 x | Pine wood slat 2.0x10.0x1000 mm |
1 x | 800TVL CMOS camera for FPV |
1 x | Carbon tube (L 1000 mm, Ø2 mm, Ø1 mm) |
2 x | Protector Connector Dean-T (1 pair) |
1 x | 200 Newtons FEMA absorber |
1 x | Blue silicone 0,5 qmm wire (50 m) |
1 x | Servo HITEC HS-125 MG |
1 x | Dean "T" - Futaba Adapter |
1 x | Mini Avanti S 1.4m blue/white/red CLASSIC |
1 x | Profile ABS Square 4 x 1000 mm |
1 x | Exhaust K45TP |
1 x | Allen wheel collar M3x3 |
1 x | XT-90 connector (pair) |
1 x | Model Airplane RC Kit Banana |
1 x | Carbon tube 3k-LW (L 2000 mm, Ø30 mm, Ø28 mm) |
1 x | Blue aluminium servo arm V3-Hitec 1,25inch M3 |
1 x | 6,4x1000 mm 2:1 blue termoretract tube |
1 x | 16x10 tree blades propeller Master Airscrew |
2 x | Linden wood slat 2.0x2.0x1000 mm |
1 x | Flip ARF (Top Model) |
1 x | Carbon fiber rod 5.0 mmx1000 mm |
1 x | Double conector with JR adapter and 200 mm extension |
2 x | Hard brass tubing (L 1000 mm, Ø13.0 mm, Ø12.0 mm) |
2 x | "S" set for boats |
1 x | Green silicone 0,25 qmm wire (50 m) |
2 x | 4 mm M3 red control terminal (4 pcs) |
1 x | Servo HITEC HS-5084 MG |
1 x | Servo Mount M (blue) |
1 x | ABS tube 20.0x18.0x1000 mm |
1 x | Wheel 28 mm |
1 x | Carbon tube (L 1000 mm, Ø7 mm, Ø5 mm) |
1 x | Flap hinge (6 pcs) |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø20 mm, Ø18 mm) |
1 x | ABS "T" angle 2.0x2.0x1000 mm |
1 x | Rudder 2_Tray 4.5~5 inch |
1 x | LED wire (orange - 2pcs) |
1 x | ABS angle 1.5x1.5x1000 mm |
3 x | SE Ring HACKER 300 mm (2 pcs) |
1 x | Strip 1,5x1,5x330 mm |
1 x | Muffler DLE-120 Left |
1 x | Gearwheel 9724/09 for ZG 45 |
1 x | Fully Threaded Steel Rod alumin 100 mm M3 (2 pcs) |
1 x | Copier 5x20 cm pcs |
1 x | 12x8 tree blades propeller |
1 x | DLE 55 RA pipe plug |
1 x | EC-Cutter |
1 x | EC5-Set female, simple quality, 2 x female pin, 1 x blue housing |
2 x | XT-60 connector (male) |
1 x | MB339 Mini 1.45m White/Orange ARF +elec.L.Gear + 3 Microser |
1 x | L-shaped servo mount |
1 x | PVC 0,08 qmm Futaba servos wire (5 m) |
1 x | CC 05 |
1 x | Dremel 3000 130W |
1 x | Quicklock washer 2 mm (10 pcs) |
2 x | PVC transparent battery termo-retract 70 mm (10 m) |
1 x | SHK 4000 mm Scale 1:4.25 |
1 x | Straightened rod Ø 0.8 mm x 1000 mm |
1 x | Battery LiPo TATTU 1300 mAh 4S 14,8V 75C |
1 x | Receiver bed (Blue) |
1 x | TP/TopFuel - XH 2/3S Adapter |
1 x | Carbon tube (L 1000 mm, Ø8 mm, Ø6 mm) |
1 x | LH long black aluminium horn L31xH30 (2pcs) |
1 x | Mudguard for 140/165 mm wheels |
2 x | MPX housing with flange (4 pcs) |
1 x | Servo HITEC HS-311 |
1 x | Conector FUTABA Servo male BLUE silicon (10 pcs) |
1 x | Circlik for shaft 1.2 mm (10 pcs) |
1 x | Threaded coupler ALU M2 Ø 3 (2 uds) |
1 x | Wing conexion 2 servos Futaba 50 cm |
1 x | PVC 0,25 qmm 4 line servos wire JR/Graupner (5 m) |
1 x | Carbon tube (L 1000 mm, Ø4 mm, Ø2,5 mm) |
1 x | Silicone black 0,5 qmm wire ( 1 m) |
1 x | Profile ABS half cane 8.0x1000 mm |
1 x | Fascination 3600 mm ARC |
1 x | Aluminium cap bolt washer M3 red (8 pcs) |
1 x | 30 cm DEANS female connector |
1 x | USB HLS prog. interface |
1 x | Savox Brushless Servo SB-2271SG |
1 x | 135 mm PVC transparent battery termo-retract 68 mm (1 m) |
1 x | Blue aluminium servo arm V2-Hitec 1,0 inch M3 |
1 x | EDGE 540-A 105" (2660 mm) |
1 x | Servo HITEC HSB-9370TH |
1 x | THERMIK XL 4000 mm |
1 x | ABS tube 3.0x1.0x1000 mm |
1 x | Electromagnets brake |
1 x | Switch Cap M (silver) |
1 x | Silicone red 0,75 qmm wire ( 1 m) |
1 x | Silicone 0,14 qmm servos wire Graupner (5 m) |
1 x | Silicone 0,25 qmm servos wire Graupner (100 m) |
1 x | Sealing Iron Sleeve STD |
1 x | Foam wheel Ø 38 mm (2 pcs) |
1 x | Silicone black 1,0 qmm wire (100 m) |
1 x | Horns set HS-65HB/MG, 5065MG |
1 x | 6 mm Quick clamp_S (10 pcs) |
1 x | 76x23 Ø3.5 mm aluminium core wheel |
1 x | PVC yellow transparent battery termo-retract 69 mm (10 m) |
1 x | Para-RC Mix |
1 x | Lite Plywood panel 600x300x3.0 mm |
1 x | Fiberglass plate 620x540x1,0 mm |
1 x | U Profile ABS 8,0x4,0x1000 mm |
1 x | SIG Coverall 1.2x1.8 m |
1 x | 2,3 mm Prop Adapter M6 |
1 x | Windsock Ozone L - 700 mm |
1 x | NF-3 RC set |
1 x | ENIGMA ARF |
1 x | Heat Seal Iron |
1 x | Anodized aluminium M3x0,5x20 mm Sokect Head screw (4 lilac pcs) |
1 x | Round Rod 1,25x1000 mm |
1 x | Fascination 3600 mm, Spare Wings (Top Model) |
1 x | ABS Strip 1.0x4.0x1000 mm |
1 x | VAGABOND 1500 mm ARF V2 (Red) |
1 x | Profile ABS half cane 2.5x1000 mm |
1 x | Brake disc Electron Retracts |
1 x | ABS Strip 1.0x5.0x1000 mm |
1 x | Futaba External voltage input cable Futaba CA-RVIN-700 |
1 x | 400 Newtons FEMA absorber |
1 x | ABS rectangular profile 10x5.0x1000 mm |
1 x | Sensor telemetry FUTABA SBS-01C |
1 x | Servo HITEC HS-5685MH |
1 x | Silicone black 1,0 qmm wire ( 1 m) |
1 x | 2 LiPo XH>EH adapter |
1 x | Ion Pro, Wing joiner (JP Model) |
1 x | Transmitter Balancer Futaba FF9-DX7-JR-Hitec |
1 x | Universal Filter |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø8 mm, Ø6 mm) |
1 x | Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm) |
1 x | EC5-Set male, simple quality, 2 x female pin, 1 x blue housing |
1 x | Hard brass tubing (L 1000 mm, Ø11.0 mm, Ø10.0 mm) |
1 x | ABS Strip 1.5x3.0x1000 mm |
1 x | Ion Pro, Fuselage (JP Model) |
![](images/pixel_black.gif) |
316,095.39EUR |