140.00EUR

HITEC Power Supply 30A. Max. 540w
[MU114121]


Switched power supply HITEC, universal, compact and very powerful! It adapts perfectly to the multi-charger X-4 AC PLUS, which can be connected directly through the gold connectors 4 mm. You can power several chargers simultaneously but for optimal performance please check that the sum of their powers does not exceed 540W.

  Features:
- 2 exits, up to 30A between the two
- Adjustable output voltage 12 - 18V
- Large LCD display for voltage and current
- 2 USB outputs, 5V, up to 1000 mA to load MP3 players, mobile phones and digital cameras
- Controlled fan
- Overload protection
- Overtemperature protection
- Protection against short circuits

  Set:
Charger, network power cord, English / German manual

  Technical specifications
Width: 139mm
Height: 60mm
Length: 218mm
Weight: 1.62 Kg
Input voltage: 100-240V AC
Power: 540W
BID-chip system: No

  We recommend
Check the maximum input voltage accepted by your charger, not all can support a voltage of 18V, not that this source does not work for some chargers but it may be necessary to adjust its voltage to not exceed the maximum accepted by the charger.


temporarily out of stock
temporarily out of stock

Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH
1 x Connector Sub-D 2+5 Female
1 x CC 03
1 x Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm)
1 x 3 copper lacquer wire Ø0,2 mm (1 m)
1 x 30 cm BEC cable (female)
1 x 2 LiPo XH>EH adapter
1 x Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH
1 x Black copper lacquer wire Ø0,2 mm (5 m)
1 x Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm)
1 x 5 LiPo XH>EH adapter
1 x 30 cm BEC cable (male)
2 x Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm)
1 x Cabel charger transmitter GRAUPNER
1 x "Y" charging 4mm wire (2 IN-1 OUT).
1 x APM2.6 Power module with 5.3V DC BEC
1 x Balanceradapter JST-XH (Heli 47G) 2-6 c.
1 x Dean "T" - Futaba Adapter
1 x CellPRO 4S Adaptader (GP/KO up to 4S)
1 x CM-3
1 x CC 02
1 x Connector Sub-D 2+5 Male
1 x Vasa model Catapult
1 x Streamline Stainless Steel Tubing 7.5x4.5x1000 mm
2 x ABS angle 3,0x3,0x1000 mm
1 x ABS angle 10,0x10,0x1000 mm
1 x ABS "T" angle 6.0x6.0x1000 mm
1 x Profile ABS Square 4 x 1000 mm
1 x ABS "T" angle 4.0x4.0x1000 mm
1 x L-Connector 1.0 mm x 1000 mm
1 x Profile ABS Square 3 x 1000 mm
1 x Streamline Stainless Steel Tubing 6.3x3.5x1000 mm
1 x U Profile ABS 3,0x6,0x1000 mm
2 x Profile ABS half cane 2.5x1000 mm
1 x Streamline Stainless Steel Tubing 12.3x7.7x1000 mm
1 x U Profile ABS 5,0x10,0x1000 mm
1 x Bungee HLG Premium
1 x ABS "T" angle 10.0x10.0x1000 mm
1 x Cross Connector 4.0 mm x 1000 mm
1 x U Profile ABS 1,0x2,0x1000 mm
1 x ABS angle 5,0x5,0x1000 mm
1 x Profile ABS Square 2 x 1000 mm
1 x T-Connector 4.0 mm x 1000 mm
1 x Streamline Stainless Steel Tubing 15.5x8.5x1000 mm
1 x Streamline Stainless Steel Tubing 14.5x9.6x1000 mm
1 x Profile ABS half cane 2.0x1000 mm
1 x U Profile ABS 2,0x4,0x1000 mm
1 x ABS angle 2,0x2,0x1000 mm
2 x Streamline Stainless Steel Tubing 10.5x5.7x1000 m
1 x ABS "T" angle 8.0x8.0x1000 mm
1 x Simulador RealFlight RF-9.5 S (sin emisora)
1 x EasyFLY Addon
3 x SIMtransmitter 6 Mode 2
1 x GameCommander USB Universal
1 x Turbina KINGTECH K320 G5
1 x Adaptadores carga 6s JST-XH
1 x Servo GO-1035MG 16 kg.cm 0.08s/60º
1 x Electric Landing Gear "Black Edition" ULTIMATUM 3.0 (Elektron Re
1 x Extension MPX-MPX 20 cm
1 x Pin type hinge Al 4,5x70 mm demount (2 pcs)
1 x Pin type hinge Al 3,0x50 mm demount (2 pcs)
1 x Gates hinge
1 x Small pinned hinge (12 uds)
1 x Nylon hinge 15x0,3 (10 pcs)
1 x Fast'n EZ-CA-Hinge, lite (12 uds)
1 x Pin type hinge Al 4,5x70 mm (2 pcs)
1 x Nylon hinge for flaps/gates 27x10,5 (2 pcs)
1 x Nylon hinge for flaps 33x9 (2 pcs)
1 x Gates hinge aluminium (1 pcs)
1 x Flap hinge 33x9 mm (6 pcs)
1 x Cylidric hinge 43 mm Ø 2,5 mm (5 pcs)
1 x 67 mm cylidric hinge Ø 5 mm (4 pcs)
1 x Gates hinge 30x16 mm (2 pcs)
1 x 43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs)
1 x Cylidric hinge 33 mm Ø 2 mm (5 pcs)
1 x Pin type hinge Al 3,0x50 mm (2 pcs)
1 x 48 x 10 mm cylidric hinge Ø 3,0 mm (10 pcs)
1 x 15 mm reinforced hinge
1 x Pin type hinge Al 4,5x70 mm to wire (2 pcs)
1 x 76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
1 x Long pinned hinge (6 uds)
1 x Extension 100 cm (Futaba)
1 x Carbon fiber rod 16 mm x 1000 mm
1 x Tape GFK 25 mm
1 x Monokote BLUE metalizado (1.8x0.65m)
1 x Marker ties (20 pcs)
1 x M2,5 5Diam black ball link V2 (2 pcs)
1 x Ball link M3 (6 uds)
1 x CC 05
1 x 3 LiPo XH>EH adapter
1 x CC 01
1 x Profile ABS half cane 6.0x1000 mm
1 x Soporte filtro FESTO (4 pcs)
1 x Tube support Ø 6mm (10 pcs)
1 x ABS rectangular profile 12x6.0x1000 mm
1 x Sandwich carbon + poplar 4mm + carbon 290x160 mm
1 x USB Adaptor OPTronics
2 x Refueling Cap V3 Black
1 x Cierre cabina aluminio Ø5, I=16 mm
1 x Fully Threaded Steel Rod alumin 80 mm M3 (2 pcs)
1 x ESC MEZON 115 Opto
1 x SERVO HOLDER
1 x Servo Arm 25T M3 KAVAN 6.5 / 19.6 mm
1 x Universal Charging Lead - 500mm - 4mm to Glow Plug Igniter
1 x Oracover Black 10 m
1 x Fuel bottle 500 ccm
1 x LOWER TOW HOOK
1 x Glow starter with charger 230v
1 x Motor SAITO FG-61 TS
1 x HOPPER tank Digitech 250 ml (Festo nipples 6 mm)
1 x Waterproof adhesive tape, width 19mm, length 25m
1 x Propeller POWER-PROP 7x7
1 x Mobile Terminal
1 x ABS "T" angle 2.0x2.0x1000 mm
1 x DPSI magnetic switch actuator (PCB)
1 x U Profile ABS 8,0x4,0x1000 mm
1 x Profile ABS half cane 3x1000 mm
1 x DUPLEX 2,4GHz MRPM-AC EX
1 x L-Connector 1.5 mm x 1000 mm
9,511.51EUR
Manufacturers
Manufacturer Info
MULTIPLEX
MULTIPLEX Homepage
Other products
Languages
Español English
Currencies