4.50EUR

CA Glue fast 20g
[R1501032]


CA Glue fast 20g
Superglue (fast) is a normal type Cyanoacrylate adhesive with fast setting, high flow abilit, and good penetration characteristics.

It has been specially formulated to achieve the strongest possible bond between well-mated, non-porous surfaces, such as rubber, metals, plastics, glass, etc.

Single-component
Transparent
Very low viscosity, high setting speed
Bonds obtain hand strength after 2-15 seconds
Special bottle*
*A metal needle is fitted in the lid, which is pressed into the opening of the bottle's dosing attachment when it is screwed on. This reliably prevents leakage, drying out and sticking of the opening. The dosing attachment allows a fine dosing of the adhesive.

Physical properties
Liquid state
Base Ethyl Cyanoacrylat
Colour clear
Specific Gravity (at 20 °C) 1.053~1.060
Refraction Index (n 20 D) 1.439
Flash Point (°C) >80 °C
Boiling Point (°C) 65/6mm Hg
Viscosity (cP) 3-5
Cured state
Colour clear
Specific Gravity (at 20 °C) 1.1~1.3
Processing temperature -55 - 80 °C
Refraction Index (n 20 D) 1.49
Dielectric Constant (bei 10 MHz) 3.5
Dielectric Loss (bei 10 MHz) 0.067
Soluble in Acetone, Dimethyl formamide,Nitromethame and Dimethyl sulfoxide.
Bond strength (Tensile shear strength, cured for 24 hours at 20-25 °C)
kg/cm²
Rigid PVC to rigid PVC 40-60
ABS to ABS 50-70
Polycarbonate to polycarbonate 80-120
Polystyrene to polystyrene 30-45
Natural rubber to natural rubber 5-9
Steel to steel 190-210
Stainless steel to stainless steel 200-220
Aluminum to aluminum 160-180
Copper to copper 150-170
Steel to rigid PVC 50-60
Stainless steel to neoprene 5-10
SBR to SBR 5-10
Cure speed
Seconds
ABS to ABS 4-5
Wood to wood 50-60
ABS to stainless steel 5-10
NBR to stainless steel 3-5
NBR to NBR 3-5
Stainless steel to stainless steel 3-5
ABS to NBR 3-5
Wood to ABS 5-10
Storage and shelf life:
Our superglue can be stored in a cool and dark place for about 1 year (for example in the refrigerator at + 5 °C).
At room temperature about 6 months. At temperatures above 20 °C the shelf life is further reduced (e. g. in the summer months)


temporarily out of stock
temporarily out of stock

Reviews

Customers who bought this product also purchased
TYGON tubo 1 m Diam. 3.4 x 2.0  mm
TYGON tubo 1 m Diam. 3.4 x 2.0 mm

temporarily out of stock
temporarily out of stock

Tygon tube 6.35 - 3.18 mm 1m
Tygon tube 6.35 - 3.18 mm 1m

temporarily out of stock
temporarily out of stock

Propeller MENZ-S 23x8
Propeller MENZ-S 23x8

temporarily out of stock
temporarily out of stock

Sparkplug NGK CM6
Sparkplug NGK CM6

temporarily out of stock
temporarily out of stock

XT-60  connector (female)
XT-60 connector (female)

temporarily out of stock
temporarily out of stock

XT-60  connector (male)
XT-60 connector (male)

temporarily out of stock
temporarily out of stock

Categories
* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->
  
  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
    Cianocrylate->
      BSI Cianocrilates
      Cyanocrylate R&G
      KAVAN Ciano
      Yuki Model
    Epoxy->
    Resin/Gelcoat
    Glass Bubbles
    Contact adhesive
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
2 x Xplorer4 anemometro
2 x Xplorer1 anemometro
1 x Xplorer3 anemometro
1 x Ball link Aluminio M3 x 3 x 5 x 18mm (6 uds)
1 x Couple M4 for wire (10 pcs)
1 x Z type of cable coupler Ø 1.8 (2 uds)
1 x Ball link Aluminio M3 (2 pcs)
2 x Threaded coupler ALU M3 Ø 5 (2 uds)
1 x Clevis plastico I=44 mm / hole 3mm / pin 2 (2 pcs)
1 x Clevis plastico I=45 mm / hole 3mm / pin 1 (2 pcs)
1 x Ball link V1 Ø7 M4/3 (6 uds)
1 x Kwik link AL M3 con Clip (2 pcs)
1 x Clevis plastico I=30 mm / hole 2.5mm / pin 1 (2 pcs)
1 x Ball Link ALU M3 - RH (1 pcs)
1 x Threaded coupler ALU M3 Ø 6 (2 uds)
1 x Aluminium red ball links M3 V1 (10 pcs)
1 x Angled clevis with threaded rod M3
1 x Ball Link M2 with Ball and Hardware, 10 pcs
1 x Threaded coupler M3 (10 uds)
1 x Aluminium coupler M3/2 with ball bearing (1 pcs)
1 x Ball link duraluminium M3 V1 (10 pcs)
1 x Brass ball links BS M3 V1 (10 pcs)
2 x Threaded coupler Micro M2 Ø 0,8 mm (10 pcs)
1 x Threaded coupler ALU M2,5 Ø 6 (2 uds)
1 x Ball link Aluminio M4 x 4 x 6 x 26mm (4 uds)
1 x Aluminium coupler M2,5/2 with ball bearing (1 pcs)
1 x Kwik link AL M2,5 L:23 mm (2 pcs) + Pin Ø 1,6 mm
1 x Threaded coupler Micro M2 Ø 0,8 (10 pcs)
2 x Threaded coupler M2,5 Ø 3 mm (10 pcs)
1 x Motor A2212/13T
1 x PROXXON - SANDING BELTS FOR BSL 220/E 120 GRIT (5 pcs)
1 x Digital scale up to 40 kg
2 x Starter EM Gear Power 250
1 x Starter 12v (Max 180 and 30ccm)
2 x Starter EM Gear Power 80
1 x Starter 12v (Max 90 and 15ccm)
1 x PROXXON - SANDING BELTS FOR BSL 220/E 80 GRIT (5 pcs)
3 x Medidor ángulos y/o incidencias
2 x Hot Glue Stick GREEN
2 x Crimping tool
2 x Cut tube
2 x Truck-trailer for gliders 720 x 239 mm
1 x Z Bender - S Type Tool
2 x Ball Link Plier
2 x Field folding model stand
2 x Z Bender - S Type Tool
2 x 2,0x50 mm allen screwdriver
2 x Screwdriver for Torx® TX8
2 x Disposable Injector Bags (30x16cm) 100 pcs
1 x Digital precision scale up to 2000 g
1 x Dust collector for mould cleaning
2 x 2,5x60 mm allen screwdriver
2 x Propeller balancer
2 x PROXXON - SILICON CARBIDE BELTS FOR BSL 220/E
1 x PROXXON - SANDING BELTS FOR BSL 220/E 180 GRIT (5 pcs)
1 x Screwdriver for Torx® TX6
3 x 
1 x Surface Indicator Gauge Small
1 x Angle of incidence meter
2 x Propeller balancer
2 x 3,0x60 mm allen screwdriver
2 x 1,5x50 mm allen screwdriver
1 x Hexagonal ball head 2.0 x 50 mm
1 x Hot Glue Stick BLACK
1 x Field folding model stand SebArt
1 x SERVO HOLDER
1 x Cabin latch Fox MDM1 4m (pair)
1 x Connectors banna oro 8,0 mm 5 pcs(Female)
1 x Propeller FALCON 32,5x11 PUSHER Carbono
1 x BALSA trip 5.0x5.0x1000 mm
1 x M2,5 5Diam short black ball link V2 (2 pcs)
1 x Kwik link AL M3 L:30 mm (2 pcs) + Pin Ø 2,0 mm
1 x M4xM2,5xL30 nylon clevis and arm (10 uds)
1 x Pulley brass 2,5/1 (2 pcs)
1 x Fully Threaded Steel Rod M2,5 (2 uds)
1 x Pin to cable coupler M1,6 ⌀ (6 pcs)
1 x Turnbuckle M2,5x32/48 (2pcs)
1 x Metal ball clevis M3 (10 uds)
1 x Ø 1,6 mm pin for Kwik link MPJ2160/2161 (6 pcs)
1 x Small kwik link (10 pcs)
1 x Threaded coupler ALU M2,5 Ø 3 (2 uds)
1 x Turnbuckle M1,6x17/27 (2pcs)
1 x Propeller POWER-PROP 7x7
1 x 100x50 mm SLH KOVO wheel
1 x 1/10 Pilot "Jimmy"
1 x 18m Fitting barb
1 x 20 mm carbon horn
1 x 280 cc gasoline fuel tank complet
2 x Copier 2x20 cm pcs
1 x 120x60 mm C SLH KOVO wheel
1 x Copier 5x20 cm pcs
1 x Z type of cable coupler Ø 2 (2 uds)
1 x Ferrita 14x8x5.5 mm
1 x Threaded coupler ALU M2 Ø 4 (2 uds)
1 x Clevis plastico I=26 mm / hole 2mm / pin 1 (2 pcs)
1 x 100g Flux Paste for Silver Solder
1 x Boxed KIT OF 7 Rotary Burrs FINE
1 x 55% silver electrodes (2 pcs)
1 x 800TVL CMOS camera for FPV
1 x USB Mini Camera endoscope
1 x 1/12 Pilot "Tom"
1 x 1/12 Pilot "Cougar"
1 x 1/10 Pilot "Jack"
1 x 22 mm Cut Disc Proxxon/Dremmel
1 x Starter Sullivan-STAR 601
1 x 
1 x Concave-Convex sandpaper file 13 mm
1 x 
1 x DLA 116 crankshaft
3,803.87EUR
Manufacturers
Manufacturer Info
R-G.de
R-G.de Homepage
Other products
Languages
Español English
Currencies