4.50EUR

CA Glue fast 20g
[R1501032]


CA Glue fast 20g
Superglue (fast) is a normal type Cyanoacrylate adhesive with fast setting, high flow abilit, and good penetration characteristics.

It has been specially formulated to achieve the strongest possible bond between well-mated, non-porous surfaces, such as rubber, metals, plastics, glass, etc.

Single-component
Transparent
Very low viscosity, high setting speed
Bonds obtain hand strength after 2-15 seconds
Special bottle*
*A metal needle is fitted in the lid, which is pressed into the opening of the bottle's dosing attachment when it is screwed on. This reliably prevents leakage, drying out and sticking of the opening. The dosing attachment allows a fine dosing of the adhesive.

Physical properties
Liquid state
Base Ethyl Cyanoacrylat
Colour clear
Specific Gravity (at 20 °C) 1.053~1.060
Refraction Index (n 20 D) 1.439
Flash Point (°C) >80 °C
Boiling Point (°C) 65/6mm Hg
Viscosity (cP) 3-5
Cured state
Colour clear
Specific Gravity (at 20 °C) 1.1~1.3
Processing temperature -55 - 80 °C
Refraction Index (n 20 D) 1.49
Dielectric Constant (bei 10 MHz) 3.5
Dielectric Loss (bei 10 MHz) 0.067
Soluble in Acetone, Dimethyl formamide,Nitromethame and Dimethyl sulfoxide.
Bond strength (Tensile shear strength, cured for 24 hours at 20-25 °C)
kg/cm²
Rigid PVC to rigid PVC 40-60
ABS to ABS 50-70
Polycarbonate to polycarbonate 80-120
Polystyrene to polystyrene 30-45
Natural rubber to natural rubber 5-9
Steel to steel 190-210
Stainless steel to stainless steel 200-220
Aluminum to aluminum 160-180
Copper to copper 150-170
Steel to rigid PVC 50-60
Stainless steel to neoprene 5-10
SBR to SBR 5-10
Cure speed
Seconds
ABS to ABS 4-5
Wood to wood 50-60
ABS to stainless steel 5-10
NBR to stainless steel 3-5
NBR to NBR 3-5
Stainless steel to stainless steel 3-5
ABS to NBR 3-5
Wood to ABS 5-10
Storage and shelf life:
Our superglue can be stored in a cool and dark place for about 1 year (for example in the refrigerator at + 5 °C).
At room temperature about 6 months. At temperatures above 20 °C the shelf life is further reduced (e. g. in the summer months)


temporarily out of stock
temporarily out of stock

Reviews

Customers who bought this product also purchased
Sparkplug NGK CM6
Sparkplug NGK CM6

temporarily out of stock
temporarily out of stock

TYGON tubo 1 m Diam. 3.4 x 2.0  mm
TYGON tubo 1 m Diam. 3.4 x 2.0 mm

temporarily out of stock
temporarily out of stock

Tygon tube 6.35 - 3.18 mm 1m
Tygon tube 6.35 - 3.18 mm 1m

temporarily out of stock
temporarily out of stock

Propeller MENZ-S 23x8
Propeller MENZ-S 23x8

temporarily out of stock
temporarily out of stock

Conector BEC female (10 pcs)
Conector BEC female (10 pcs)

temporarily out of stock
temporarily out of stock

XT-60  connector (female)
XT-60 connector (female)

temporarily out of stock
temporarily out of stock

Categories
* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->
  
  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
    Cianocrylate->
      BSI Cianocrilates
      Cyanocrylate R&G
      KAVAN Ciano
      Yuki Model
    Epoxy->
    Resin/Gelcoat
    Glass Bubbles
    Contact adhesive
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x Extension PVC 150 cm (Graupner)
1 x Futaba Female 40 cm extension
1 x Nylon hinge 20x20x0,3 (10 pcs)
1 x Cable silicona female batt. receptor 30 cm (Futaba)
1 x Cable with accesories
1 x Nylon hinge for flaps/gates 27x10,5 (2 pcs)
1 x Horn 6/35 with M3 Bearing
2 x 48 x 10 mm cylidric hinge Ø 3,0 mm (10 pcs)
1 x Horn 5/20 with M2 Bearing
1 x SlowFlyer control horn (3 pcs)
1 x Horn with ball 55x40
1 x Threaded coupler ALU M2 Ø 4 (2 uds)
1 x Gates hinge aluminium (1 pcs)
2 x Cabel "Y" 15 cm
1 x Long pinned hinge (6 uds)
1 x Extension S-Bus 1-2 silicon 120 cm FUTABA
1 x Threaded coupler ALU M3 Ø 6 (2 uds)
1 x 76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
1 x 43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs)
2 x Threaded coupler ALU M2 Ø 3 (2 uds)
2 x Extension 90 cm (Futaba)
1 x 67 mm cylidric hinge Ø 5 mm (4 pcs)
1 x Cabel "Y" 30 cm (Futaba)
2 x Brass control horn M2 short for wire (2 pcs)
2 x Cylidric hinge 33 mm Ø 2 mm (5 pcs)
1 x Premium servo extension 25cm
1 x Cable S.BUS 3 salidas 100 mm
1 x Prolongador S-Bus JR/JR 10cm
1 x Threaded coupler ALU M3 Ø 4 (2 uds)
2 x Threaded coupler ALU M3 Ø 5 (2 uds)
1 x Cable S.BUS 3 salidas 300 mm
1 x Futaba Female 40 cm extension
1 x Threaded coupler ALU Left M3 Ø 4 (2 uds)
1 x Extension silicon 10 cm (Graupner)
1 x Brass control horn M4 short for wire (4 pcs)
1 x servo adapter lead, JST-SH socket - JR male Pin, for GR-12SH+HoT
1 x Pin type hinge Al 3,0x50 mm demount (2 pcs)
2 x 15 mm reinforced hinge
1 x Pin type hinge Al 4,5x70 mm (2 pcs)
2 x Extension 30 cm (Futaba)
1 x Extension S-Bus 1-2 silicon 30 cm FUTABA
1 x Prolongador S-Bus JR/JR 20cm
1 x Horn 13,5x16 mm (2 pcs)
1 x Extension 15 cm (Futaba)
1 x Premium servo extension 75cm
1 x Canopy hinges for Discus 2c, Discus 2a, Ventus 2cx (2pcs)
1 x Small aluminium horn red (2pcs)
1 x Long pinned hinge (12 uds)
1 x 6 mm aluminium horn with patella
1 x 6 mm red aluminium threaded horn with patella
2 x Cylidric hinge 43 mm Ø 2,5 mm (5 pcs)
1 x Nylon hinge 15x0,3 (10 pcs)
1 x Extension silicon 100 cm (Graupner)
1 x RH long aluminium horn (2pcs)
1 x Extension silicon 30 cm female (Futaba)
1 x Horn 5/15 with M2 Bearing
1 x 20 mm carbon horn
2 x Extension 100 cm (Futaba)
1 x 18 mm reinforced hinge
2 x Gates hinge 30x16 mm (2 pcs)
2 x Extension silicon 35 cm male (Futaba)
1 x 0,14 mm PVC servo wire extension, ZH micro conector.
1 x Pin type hinge Al 3,0x50 mm (2 pcs)
1 x Premium servo extension 50cm
1 x Miniature brass strap hinge, 1 m
1 x Horn 6/27 with M3 Bearing
1 x 200 mm extensión servo HITEC/JR
2 x Horn with ball 40x30
1 x Horn 20x28,5 mm (2 pcs)
2 x LH long aluminium horn L31xH30 (2pcs)
2 x Extension silicon 10 cm (Futaba)
1 x Extension silicon 30 cm female (Graupner)
2 x Flap hinge 33x9 mm (6 pcs)
1 x Extension silicon 100 cm (Futaba)
1 x 6 mm blue aluminium threaded horn with patella
2 x Wing-connector: Glass / Carbon tube (13.7/12.5) x 1000 mm
1 x Aluminum Bayonet / strongal D25 mm / 1 m
1 x Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 10 m
1 x Bungee HLG Premium
1 x 
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (10 pcs)
1 x Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 50 m
1 x Glass fabric tape 49 g/m² (Interglas 02037, finish FE 600/800, p
1 x Cyanocrylate MD GA460 odourless 20g
1 x ARAMID honeycomb 1300x2600x2 mm
1 x TeXtreme® Carbon tape 38 g/m² (IM, unidirectional) 20 mm x 100m
2 x Glass fabric tape 225 g/m² (Silane, plain) 30 mm X 100m
2 x Wing-connector: Glass / Carbon tube (26.5/25 x 25/23) x 1000 mm
1 x Vacuum bag, 1200 mm x 50 m
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x4.0 mm (5 pcs)
1 x Mixing tube for double syringes and cartridges (MR 1:1 and 2:1)
1 x Glass fabric tape 225 g/m² (Silane, plain) 40 mm
1 x Cyanoacrylate MD GLUE plus 405, for extreme loads 20g
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (20 pcs)
1 x Carbon roving DowAksa / 24k / 1600 tex
1 x Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 50M
1 x Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 100M
2 x Carbon fibre tape 200 g/m² (unidirectional) 50 mm
1 x Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 15 m
2 x Vasa model Catapult
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (10 pcs)
1 x PARTALL® Hi-Temp Wax, 340 g
1 x Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m
2 x Hardener Aero EPH 161 (250 g)
1 x Linden wood slat 3.0x3.0x1000 mm
1 x Smoke set "S"
1 x Painting GHT Lexan Black 150 ml
1 x Strip ABS 2.0x10.0x1000 mm
2 x Small pinned hinge (12 uds)
1 x Nylon hinge for flaps 33x9 (2 pcs)
1 x Nylon hinge 20x15x0,3 (10 pcs)
1 x Large flex hinge (12 uds)
1 x Round flex hinge (12 uds)
1 x Small pinned hinge (6 uds)
1 x Micro flex hinge (12 uds)
2 x Futaba male 40 cm extension
1 x Circlick securite
1 x Extension silicon 50 cm (Futaba)
1 x Sun Cover PC 21 XXL (JMB Jets)
1 x Threaded coupler ALU M2,5 Ø 3 (2 uds)
1 x Micro control horn (2 pcs)
1 x Short adjustable control horn 3x24
1 x Long horn 50x26
1 x Small aluminium horn gold (2pcs)
1 x Brass control horn M3 short for wire (2 pcs)
1 x Horn DUBRO 1/2A
1 x Ventus 1:4 set of instruments
1 x Propeller set 400 (2R+2L)
1 x Helices DJI Mavic Air STEALTH "Black" (4x Ud)
1 x Parachute XTRALITE S
1 x Motor Eachine Racer 250 Brushless Motor - BG2204 2300kv - CCW th
1 x 
1 x Balls 4 mm
1 x resin-hardener L-385 H-385 (5000 g)
1 x Grub screw M3x3 shouldered (2 pcs)
1 x Glass Bubbles (0,12 g) 350 ml
1 x Epoxy Resin L 285 + Hardener 386, kit/ 1.35 kg
1 x Bearing housing
1 x F450/550 Quadcopter, landing gear
1 x Fast'n EZ-CA-Hinge (12 uds)
1 x Threaded coupler ALU Left M2,5 Ø 3 (2 uds)
1 x Extension 7.5 cm
1 x Hardener EPIKURE™ Curing Agent MGS™ LH285, bottle/ 800 g
1 x Brass control horn M4 short for wire (10pcs)
1 x Quadcopter Q50 Kit Carbon Fiber
1 x Cable silicona macho batt. receptor 30 cm (Futaba)
1 x Head runner
1 x GlassBubbles 2.5 g/cm³ Panda, tin (approx. 1 l)
1 x Head lower part
1 x Propeller POWER-PROP 7x7
1 x Glass Bubbles (0.12g) 400 G (aproxx 3.3 l)
1 x resin-hardener package L-385 with hardener H-385 (875 g)
1 x Spare Part Frame Set for EACHINE RACER 250
1 x Blade holder center
1 x Thixotropic agent TM 100, tin/ 75 g (approx. 1 l)
1 x Pin type hinge Al 4,5x70 mm demount (2 pcs)
1 x Wheel keeper washer
1 x Gates hinge black 30x16 mm (2 pcs)
1 x Switch moment button, 2 functions, long FUTABA
1 x White 2,4 GHz antenna exit guides (2 pcs)
1 x Antenna holder bracket double
1 x MULTIPLEX ALUMINUM CASE "M-LINK"
1 x Decorative caps, multicoloured
1 x Charger HITEC CG-42 TX 7.2v/ RX 4.8v (80 mA)
1 x FPV Station for SE TX-Tray V1
1 x Futaba Aero Large Case - Internal Foam
1 x Combustible Glow "KAVAN" air/heli 5% nitro
1 x Combustible Glow "KAVAN" air/heli 15% nitro
1 x 
1 x JETCENTRAL ECU LIFE BATTERY 3800 MAH
1 x Futaba S-Bus Rx/Gyro Link Lead
1 x Charger FUTABA SQN30W12P-08 220v
1 x Adap/Exten for Futaba 12-14C
1 x Contest-S-Pult-Carbon mc-20/mc-24
1 x Switch Cap M (silver)
1 x Switch Cap M (blue)
1 x Carbon fabric 160 g/m² (plain weave) 100 cm x 3 m
1 x Carbon tube 3K-PW (L 1000 mm, Ø8 mm, Ø6 mm)
1 x Carbon fibre tube -TAPERED- 3k-PW (10 x 5 x 0.3) x 880 mm
1 x Carbon tube 3K-PW (L 2000 mm, Ø40 mm, Ø36 mm)
1 x Carbon/kevlar tube 3K-PW (L 1500 mm, Ø25 mm, Ø22.5 mm)
5,794.22EUR
Manufacturers
Manufacturer Info
R-G.de
R-G.de Homepage
Other products
Languages
Español English
Currencies