Top » Catalog » Hardware » Lights/Ilumination » UNILIGHT » UNSPOT12F0803WE

69.00EUR

3x8W Triple-Spotlight, 12mm, T-Fuse White
[UNSPOT12F0803WE]

3x8W Triple-Spotlight, 12mm, T-Fuse

How about a little more? These three small spotlights with very compact, CNC manufactured aluminium reflector (only 12mm diameter) provide optimum efficiency in the smallest of spaces. The spotlight is perfectly suitable for high-performance spotlights on small viperjets (~1,5m) and similar models; guaranteed to be visible at daylight for over a hundred meters. The wide beam angle coupled with an enormous performance make these spotlight a topmodel!

Direct operation with 3S LiPo (12V). Please ensure sufficient cooling air during operation. For the first time in model making, the spotlights are equipped with an integrated overtemperature protection. If the enclosure becomes too warm, the light will be safely switched off. Without any further cooling, do not operate such spotlights more than 3-5 minutes at a time. Otherwise, the protection will switch off the light or let it blink.

Technical data
Performance: 3x8W reference power
Overtemperature protection: switch-off and clocking of the light at 65-70°
Voltage: 3S/12V
Electricity: 0.7A
Beam angle: ~110°
Light intensity: 3x200 Lumen WHITE
Light intensity: 3x180 Lumen WARMWHITE
Dimension: D12x52mm, mounting hole D10mm
Weight: 21g (without cable)
Delivery: ready to use with 1m connection cable for 3S operation
Size comparison uniLIGHT system

under request

Reviews

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->

  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
    Emcotec
    JET CENTRAL
    Multiplex
    Night Fly
    OptoTronix
    Pichler
    PowerBox
    UNILIGHT
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

Propeller POWER-PROP 14x9
11.70EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

2 x	VIPER 1.7 Tailpipe + Fuel Tank 1500ml
3 x	BD-5 Pro ARF
3 x	METEOR 1.000 mm kit
2 x	Smoke set "Glider"
1 x	A-6 Intruder Scale 1:6 Coming soon
1 x	Blue smoke canister 140 g
1 x	Bidule 111 3000 mm
1 x	Mini Avanti S 1.4m blue/white/red CLASSIC
1 x	"M" set
1 x
1 x	Sukhoi 29S 2,6 m Yellow/Black (SebART)
1 x	Aluminium blue ball links M3 V1 (10 pcs)
1 x	EDGE 540-A 91" (2310 mm)
1 x	Tape GFK 38 mm
1 x	Ply-Span 450x600/13g White
1 x	Kwik link AL M4 con Clip (2 pcs)
1 x	PowerBox Smokepump JETs 2x outside
1 x	33,0 mm propeller (left propeller)
1 x	R6106 HF 2,4 GHz receiver
1 x	Mini Avanti S 1.4m yellow/black
1 x	Smoke set "M"
1 x	Steel tube (L 1000 mm Ø6 mm, Ø5,7 mm)
1 x	Servo Controller Fibra optica
1 x	Large flex hinge (12 uds)
1 x	VBar NEO
1 x	25 mm reinforced hinge
1 x	Mould Resin P + Hardener EPH 161-P, kit/ 585 g
1 x	White smoke bombs AX-9 (10 pcs)
1 x	Bidule 55 V3 2460 mm
2 x	SE Ring 360 mm (2 pcs)
1 x	Oracover Verde 2 m
1 x	Spannlack 1000 ml
1 x	Oracover Black 2 m
1 x	Threaded coupler ALU M3 Ø 6 (2 uds)
1 x	Brass rod Ø 0.5 mm x 1000 mm
1 x	Steel tube (L 1000 mm Ø4 mm, Ø3,7 mm)
1 x	Transmitter Crystal 35 Mc/s Ch 62
1 x	White smoke bombs AX-3 (10 pcs)
1 x	Straightened rod Ø 3.0 mm x 1000 mm
2 x	10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	Micro Tarjeta SD Rapid Rush 16 GB
1 x	Spray adhesive AEROFIX 2
1 x	Hard brass tubing (L 1000 mm, Ø2.0 mm, Ø1.2 mm)
1 x	Marker ties (20 pcs)
1 x	SE Ring 300 mm (2 pcs)
1 x	Legs + electric brakes for Viper Jet 90
1 x	Jet Afterburner Simulator NF-Jet4 RY
1 x	67 mm cylidric hinge Ø 5 mm (4 pcs)
1 x	Motor DA 60
1 x	Propeller balancer
1 x	Kwik link AL M3 L:30 mm (2 pcs) + Pin Ø 1,6 mm
1 x	SE Ring 400 mm (2 pcs)
1 x	Motor DA 100L
1 x	Carbon tube (L 1000 mm, Ø18 mm, Ø16 mm)
1 x	5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	USBCOM 5i
1 x	Straightened rod Ø 0.5 mm x 1000 mm
1 x	Nylon hinge for flaps 33x9 (2 pcs)
1 x	110 degree stainless steel bend D=18mm, widened to 20mm
1 x	"S" set for boats
1 x	Set wings Mini AVANTI S 1.4m W/B/R
1 x	Spinner propeller pleg. 40 mm / 6 mm
1 x	White spinner propeller pleg. 42 mm / 4 mm
1 x	Aluminium wide washer M4 Red (4 pcs)
1 x	PowerBox Smokepump
1 x	Truck-trailer for gliders 720 x 239 mm
1 x	Spinner propeller pleg. 36 mm / 6,0 mm
1 x	33,0 mm propeller (rigth propeller)
1 x	DUPLEX 2.4EX Expander E2
1 x	Vest clothes Hispano Aviación
1 x	DUPLEX 2.4EX MT 125 temperature sensor
1 x	Z type of cable coupler Ø 1.8 (2 uds)
1 x	Propeller RABOESCH.Ms 35mm/M4r 5-BL (rigth hydropropeller)
1 x	Flat washer 4.3 mm (20 pcs)
1 x	Hard brass tubing (L 1000 mm, Ø18.0 mm, Ø16.0 mm)
1 x	Hitec 25 mm servo arm with M3 ball link
1 x	Avanti S 1.8m Jet White/Blue
1 x	18 mm reinforced hinge
1 x	DPSI RV Mini 5 (2008)
1 x	DUPLEX R12 receiver REX Assist
1 x	T-Motor MN705-S Kv125 (pack 2 uds)
1 x	NF-3X-350 set
1 x	40,0 mm hydro-propeller (left hydropropeller)
1 x	Press fitting for 1,0 diam. steel cable (10 pcs)
1 x	T-Motor U7-V2.0 Kv420
1 x	Softshell Hispano Aviación
1 x	Spare white 36-38 mm spinner
1 x	JM electric Pump
1 x	Threaded coupler ALU M2,5 Ø 6 (2 uds)
1 x	Futaba 38 mm servo arm with ball link
1 x	800TVL CMOS camera for FPV
1 x	Coupling for 4 mm axis
1 x	SE Ring 450 mm (2 pcs)
1 x	ABS tube 8.0x6.0x1000 mm
1 x	Oracover CARBON Metalic 1 m
1 x	ORACOVER transparent Yellow (10 m)
1 x	FUSELAGE STAND MINI AVANTI EDF/JET
1 x	White smoke canister 100 g
1 x	Cooler motor type 300
1 x	Electric coversion set
1 x	Tygon tube 9.53 x 6.35 mm 15 m
1 x	Coupling for 5 mm axis
1 x	13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	Smoke pump RCEXL
1 x	Wood anchor 30 mm (2 uds)
1 x	Mini Avanti S 1.4m white/red
1 x	Threaded coupler Micro M2 Ø 0,8 (10 pcs)
1 x	TA-183 "HUCKEBEIN" (RBC Kits)
1 x	DUPLEX 2.4 EX MVario2
1 x	Glider retract undercarriage 8-16 Kg 2.5-3.2(127 mm wheel)
1 x	Cooler motor type 150
1 x	26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	Ply-Span 450x600/13g Black
1 x	EDGE 540-A 105" (2660 mm)
1 x	XT-30 connector (pair)
1 x	Couple M4 for wire (10 pcs)
1 x	Glider retract undercarriage 8-16 Kg 2.5-3.2(without wheel) 140m
1 x	Aluminium tube (L 1000 mm, Ø4.0 mm, Ø3.1 mm)
1 x	Straightened rod Ø 5.5 mm x 1000 mm
1 x	ABS tube 5.0x4.0x1000 mm
1 x	Connector CAN 15
1 x	Frontal support Speed 400/480
1 x	Anchor 50 mm (2 uds)
1 x	Clevis plastico I=26 mm / hole 2mm / pin 1 (2 pcs)
1 x	PWC6 PowerWingConnector for 6 servos with fuselage socket
1 x	Fresa corte diamante Ø 2.35mm (lentil)
1 x	Program 5v SIO RS 232
1 x	Gold antispark 4 mm plug
1 x	EXTRA 300 78" V3 Orange/Blue
1 x	Flat washer 1.7 mm (20 pcs)
1 x	Horizontal mounting servo holder
1 x	290 mm M4 7/8x212 mm shaft ship
1 x	Futaba 17 mm servo arm with ball link HITEC
1 x	Antena FUTABA receptor Standard 2.4 GHz ( 160 mm aprox.)
1 x	Electric Fuel Pump 12V
1 x	Rudder 107-06
1 x	Coupling for 3 mm axis
1 x	Spinner propeller pleg. 40 mm / 4 mm
1 x	Spray EC Red 400ml
1 x	290 mm 290 mm M5x18 mm shaft ship
1 x	Retract undercarriage for gliders 3-7 Kg 3.8-4.3 (without wheel)
1 x	NF-2 RC set
1 x	Futaba 52 mm servo arm
1 x	Motor mount for 1 m models
1 x	Horn 20x28,5 mm (2 pcs)
1 x	Cinta Goldfix 1m
1 x	Futaba 76/92 mm servo pull-pull double arm with ball link
1 x	Set brocas Ø 1.5-2.0-2.5-3.0 mm (4 pcs)
1 x	Rudder 45 mm
1 x	Retract undercarriage for gliders 12-25 Kg 2-2.8 (without wheel)
1 x	ABS tube 9.0x8.0x1000 mm
1 x	Jet Afterburner Simulator NF-Jet2
1 x	Ply-Span 450x600/13g Yellow
1 x	Turnbuckle M1,6x20/30 (2pcs)
1 x	Crankcase Gasket set for ZG 74 / ZG 80
1 x	EXTREME FLIGHT EXTRA 300-48" (1.22 m) ARF Blue (EXTREME FLIGHT)
1 x	Brass hexagonal rod Ø 3.5 mm x 1000 mm
1 x	F-104 Starfighter Y/B Aniversary(SebArt)
1 x	Carbon tube 3K-PW (L 2000 mm, Ø25 mm, Ø22.5 mm)
1 x	Wing connector 8pin with pin strip, plug & socket
1 x	SE Ring 330 mm (4 pcs)
1 x	Small mill 40x27x13 mm
1 x	DPSI RV Mini 5 Magic
1 x	Epoxy 5 min. 500 g (Resin)
1 x	Aluminum Fold Prop Spinner 40 mm / 5mm
1 x	6 mm blue aluminium threaded horn with patella
2 x	Aluminum Fold Prop Spinner 34 mm / 3 mm
1 x	Aluminum Fold Prop Spinner 38 mm / 5 mm
1 x	Propeller 8x4,3 SlowFlyer
1 x	Propeller 9x4,7 SlowFlyer
1 x	Cono NUT 5/16"x 24 -M4
1 x	Battery LiPo GENS 2600 mAh 2S 7.4v Transmitter Pack (Gens Ace)
1 x	Cable with accesories
1 x	XPower H PROP HUB Ø5.0/20mm +2,5°
1 x	Camera Sony 4140+673 CCD with Built-in 200mw TX + antenna
1 x	Angle of incidence meter
1 x	F3A carbon 75 mm spinner for Hacker C-50
1 x	SE Ring 350 mm (2 pcs)
1 x	F1 Prop Cap Can (Fuel Container Conection)
1 x	Motor Mount for Multiplex FunJet
1 x	Ignition for ZG 20/26
1 x	DPSI RV Mini 6 (2008)
1 x	wire tensioner (red)
1 x	Bags de Luxe ASPIRE
1 x	Bird (Aero-naut)
1 x	Tank Kevlar ASPIRE 6 L Kero
1 x	Set Legs + Wheels with brake ASPIRE
1 x	F-16 Scale 1:6, Electric retract landing gear
1 x	HAWKER HUNTER 1:5,8 Desert (1.770mm)
1 x	ASPIRE Red ARF 2.000 mm

35,232.15EUR