69.00EUR

3x8W Triple-Spotlight, 12mm, T-Fuse White
[UNSPOT12F0803WE]


3x8W Triple-Spotlight, 12mm, T-Fuse

How about a little more? These three small spotlights with very compact, CNC manufactured aluminium reflector (only 12mm diameter) provide optimum efficiency in the smallest of spaces. The spotlight is perfectly suitable for high-performance spotlights on small viperjets (~1,5m) and similar models; guaranteed to be visible at daylight for over a hundred meters. The wide beam angle coupled with an enormous performance make these spotlight a topmodel!

Direct operation with 3S LiPo (12V). Please ensure sufficient cooling air during operation. For the first time in model making, the spotlights are equipped with an integrated overtemperature protection. If the enclosure becomes too warm, the light will be safely switched off. Without any further cooling, do not operate such spotlights more than 3-5 minutes at a time. Otherwise, the protection will switch off the light or let it blink.

Technical data
Performance: 3x8W reference power
Overtemperature protection: switch-off and clocking of the light at 65-70°
Voltage: 3S/12V
Electricity: 0.7A
Beam angle: ~110°
Light intensity: 3x200 Lumen WHITE
Light intensity: 3x180 Lumen WARMWHITE
Dimension: D12x52mm, mounting hole D10mm
Weight: 21g (without cable)
Delivery: ready to use with 1m connection cable for 3S operation
Size comparison uniLIGHT system


Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x Savox HV Brushless Servo SB-2270SG (Swashplate)
1 x SAVOX SH 0254 servo
1 x Stainless steel cable Ø 0.5 mm (20 m)
1 x Canopy Lock V1 M3 Blue (2 pcs)
1 x Stainless steel cable Ø 1.3 mm (10 m)
1 x Stainless steel cable Ø 0.5 mm (2 m)
1 x Steering arm 16 mm Ø 3 mm (2 uds)
1 x Stainless steel cable Ø 0.88 mm - 60 kp (10 m)
1 x Horizontal cockpit anchor "tipe F3A" (2 pcs)
1 x Crimping sleeves for cable 1.3 mm (10 pcs)
2 x Stainless steel cable Ø 0.62 mm (10 m)
2 x Cierre cabina aluminio Ø5, I=16 mm
1 x Locking cable tie 2.5x100 (uds)
1 x Locking cable tie 3.2x142 (uds)
2 x Vertical cockpit anchor "tipe F3A" (2 pcs)
2 x SUS wire 3m (nylon coated)
1 x One touch canopy lock
1 x Cierre cabina aluminio Ø4, I=10 mm
1 x Electric spoiler 250 mm (2 pcs)
1 x Locking cable tie 4.6x203 (uds)
1 x Steering arm 16 mm Ø 4 mm (2 uds)
1 x Steering arm 12 mm Ø 4 mm (2 uds)
3 x Screw-lock connector M2 (2 uds)
2 x Covered closure or fairings
2 x Micro screw-lock pushrod conn snap Ø 1 mm (2 uds)
1 x Steering arm 12 mm Ø 4 mm
1 x Steering arm 16 mm Ø 3 mm
1 x Cockpit plastic closing
1 x Steering arm 12 mm Ø 3 mm (2 uds)
2 x Steering arm 16 mm Ø 4 mm
1 x Screw-lock pushrod conn snap Ø 1.5 mm (2 uds)
1 x Aluminium alloy coupler for carbon tube 6/M4
2 x Stainless steel cable Ø 0.52 mm - 15 kp (10 m)
2 x Cap closure 33/23.5mm (2 uds)
1 x Crimping sleeves for cable 0.70 mm (10 pcs)
1 x Red aluminium servo arm V2-Futaba 1,5" inch M3
2 x Blue aluminium servo arm V2-Hitec 1,0 inch M3
1 x Red aluminium servo arm V1-Futaba 23 mm M2
1 x Red aluminium servo arm V3-Futaba 1,5inch M3
1 x Red aluminium servo arm V2-Futaba 17 mm iM2
1 x Red aluminium servo arm V1-Futaba 20 mm M2
2 x Red aluminium servo arm V1-Futaba 1,25" inch M3
2 x Red aluminium servo arm V2-Futaba 1,0" inch M3
1 x Red aluminium servo arm V3-Futaba 3-3,5inch
1 x Rudder 2_Tray 3.5~4 inch
2 x Servo Mount S (red)
1 x Red aluminium servo arm V2-Futaba 1,75" inch M3
2 x Gold aluminium servo arm V2-JR 1,25" inch M3
1 x aluminium servo arm V1-JR 1,0 inch M2
1 x Blue aluminium servo arm V1-Hitec 1,5" inch M3
1 x Red aluminium servo arm V2-Futaba 2,0 inch
1 x Blue aluminium servo arm V1-Hitec 20 mm M2
1 x Initior Transmitter FTX2 Wireless
1 x Joint with bearing M3 22x5,5
2 x Socket head ball link M3 (2 uds)
1 x Socket head long ball link M3 (6 uds)
1 x Mixers smoke bombs AX-60 (5 pcs)
1 x M2,5 5Diam black ball link V2 (2 pcs)
1 x "M" set
2 x Blue smoke canister 100 g
1 x Parachutist
1 x M2/M1/6 3Diam short black ball link V1 (2 pcs)
1 x Long ball link M3 (6 uds)
1 x Blue metalic ball link M2/2 azul (2 pcs)
1 x Electric rocket starters (6 pcs)
1 x Smoke set "Glider"
1 x AX-60 starters (5 pcs)
1 x Red smoke bombs AX-60 (5 pcs)
1 x Yellow smoke canister 140 g
1 x 6 mm ball link M3 (10 pcs)
1 x Smoke set "M"
1 x White smoke canister 65 g
1 x Joint with bearing M2,5 22x5,5
1 x M2,5 5Diam short black ball link V2 (2 pcs)
1 x M3 Maxi ball link (2 uds)
1 x White smoke bombs AX-60 (5 pcs)
2 x Vest clothes Hispano Aviación
1 x Wing-connector: Glass / Carbon tube (26.5/25 x 25/23) x 1000 mm
1 x Aluminum Bayonet / strongal D25 mm / 1 m
1 x Aluminum Bayonet / strongal D12 mm / 0.5 m
1 x Wing-connector: Glass / Carbon tube (13.7/12.5) x 1000 mm
1 x U Profile ABS 3,0x6,0x1000 mm
1 x U Profile ABS 1,0x2,0x1000 mm
1 x ABS angle 4,0x4,0x1000 mm
1 x Profile ABS Square 1 x 1000 mm
1 x Streamline Stainless Steel Tubing 17.8x12.4x1000 mm
1 x ABS "T" angle 6.0x6.0x1000 mm
1 x L-Connector 1.0 mm x 1000 mm
1 x ABS angle 1.5x1.5x1000 mm
1 x ABS "T" angle 4.0x4.0x1000 mm
1 x Profile ABS half cane 3x1000 mm
1 x ABS angle 5,0x5,0x1000 mm
1 x Flat Connector 4.0 mm x 1000 mm
1 x Streamline Stainless Steel Tubing 9.0x5.0x1000 mm
1 x Profile ABS Square 4 x 1000 mm
1 x ABS "T" angle 8.0x8.0x1000 mm
1 x Streamline Stainless Steel Tubing 7.5x4.5x1000 mm
1 x T-Connector 4.0 mm x 1000 mm
1 x ABS angle 2,0x2,0x1000 mm
1 x Connectors DEANS (T)
1 x Hitec 25 mm servo arm with ball link
1 x Glases Flitemaster
1 x Spray adhesive AEROFIX 2
1 x Servo FUTABA BLS 272SV
1 x Screwdriver for Hexagon 1,27mm
1 x Carbon fiber rod 0.5 mmx1000 mm
1 x Fully Threaded Steel Rod alumin 80 mm M3 (2 pcs)
1 x Suncover 100cc Red
1 x Fully Threaded Steel Rod alumin 40 mm M3 (2 pcs)
2 x Actuador lineal HLS12-100210-7.4v
1 x Support Antena 2.4 Ghz (2 pcs)
1 x Lead with adhesive (2 pcs)
1 x Allen wheel collar M4x6
1 x Angle support XT60 conector
1 x Support XT60 conector (2 pcs)
1 x Cockpit aluminium closing
1 x Brazo servo aluminio 1.25/1.5" Futaba/MKS/Savox
2 x Wheel collar 3 mm Ø (4 uds)
1 x Window mounting channel Type H 2.5x0.5 (2 m)
1 x Wing bolts M3 Steel screw Red (2 pcs)
1 x Snap pin for micro clevis (10 uds)
2 x 100 mm rods set for direction control
1 x Wing bolts M3 Steel screw blue (2 pcs)
2 x Press fitting for 0,5 diam. steel cable (10 pcs)
1 x Cable grommet Ø 3.2 mm (4 uds)
1 x Rudder 2_Tray 4~4.5 inch
1 x Servo ROBBE FS-31 Pico Servo
1 x Yellow smoke canister 65 g
1 x LOGO 600 SX (kit)
1 x VTX 477 Carbon Rotorblade
1 x Red smoke canister 100 g
1 x Green smoke canister 140 g
1 x Ventral support for AX-18/AX-60
1 x Green smoke canister 100 g
1 x "S" set for boats
1 x Socket head long ball link M3 (2 uds)
1 x L cockpit anchor "tipe F3A" (2 pcs)
1 x White smoke canister 140 g
1 x M3 Maxi ball link (2 uds)
1 x Big Crow DLE-170M
1 x Servo DITEX EL0510M
1 x Conector JR Servo female (10 pcs)
1 x Conector AS150 7mm antichispazo (Set: 2 pares)
1 x Conector JR Servo male (10 pcs)
1 x Conector MT-60 (pair)
1 x Conector JAPAN G2 Set 5 pares
1 x Conector FUTABA Servo female BLUE silicon (10 pcs)
1 x Conector XT-30 (macho)
1 x Conector FUTABA Servo male BLUE silicon (10 pcs)
1 x Conector JR/Uni Servo male BLUE silicon (10 pcs)
1 x Bag connector 2 mm
1 x Connector CAN 15
1 x Joint with bearing M2 22x5,5
1 x M2,5 / 5Diam metal short ball link V3 (2 pcs)
1 x Servo DITEX TD2612S
1 x M2 5Diam black ball link V2 (2 pcs)
1 x Motor DLE 200cc Premium Muffler
1 x Short ball link M1.6 (6 uds)
1 x 11 mm Rubber pads (14 pcs)
1 x 25,0 mm 3-BL M4 hydro-propeller (rigth hydropropeller)
1 x Pushrod greyline 4/3 with coupler M3
1 x 3.17 mm Prop Adapter CN-Spinner
1 x 3,2 mm Prop Adapter M8
1 x 1000 ml sealer (DOPE)
1 x 11x7 tree blades propeller
1 x 290 mm M4/4 mm Prop shaft
1 x 2 mm Prop Adapter M6
1 x 300x4 mm M4 shaft ship
1 x Bomba KP500V Kingtech
1 x Fully Threaded Steel Rod Duralumin 50 mm M3 (2 pcs)
1 x Fully Threaded Steel Rod Duralumin 60 mm M3 (2 pcs)
1 x Fully Threaded Steel Rod SUS303 65 mm M3 (2 pcs)
1 x 15x7 tree blades propeller
1 x Brass control horn M2 short for wire (2 pcs)
1 x 3,2 mm Prop Adapter M6
1 x 25 mm fenders (10 pcs)
1 x 28 mm turnbuckle
1 x Press fitting for 1,0 diam. steel cable (10 pcs)
1 x Fully Threaded Steel Rod Duralumin 90 mm M3 (2 pcs)
1 x Fully Threaded Steel Rod Duralumin 80 mm M3 (2 pcs)
1 x 14 mm Portholes for screws (10 pcs)
1 x Fully Threaded Steel Rod alumin 70 mm M2,5 (2 pcs)
1 x Fully Threaded Steel Rod alumin 50 mm M3 (2 pcs)
1 x 29,0 mm propeller (rigth propeller)
1 x Fully Threaded Steel Rod alumin 60 mm M3 (2 pcs)
1 x 250 mm / 16 mm Airbrakes
1 x 10 mm portholes (10 pcs)
1 x 45 mm rods set for direction control
1 x Fully Threaded Steel Rod alumin 70 mm M3 (2 pcs) knurled
1 x Fully Threaded Steel Rod alumin 90 mm M2,5 (2 pcs)
1 x 3.2 mm Prop Adapter M6
1 x 2.3 mm Adapter for 30 mm spinners
1 x 12x8 tree blades propeller
1 x 25,0 mm 3-BL M4 hydro-propeller (left hydropropeller)
1 x 3.2 mm Prop Adapter M8
1 x 14 mm portholes (10 pcs)
1 x Fully Threaded Steel Rod alumin 70 mm M3 (2 pcs)
1 x 12 mm mast holder
1 x Fully Threaded Steel Rod alumin 100 mm M3 (2 pcs)
1 x Cockpit aluminium closing 4.7g
1 x 80 mm rods set for direction control
1 x 3,2 mm Prop Adapter M6
1 x 2,3 mm Prop Adapter M6
1 x 15x7 tree blades propeller LEFT
1 x 10 mm Prop Adapter M12
1 x 2,3 mm Prop Adapter M6
1 x Fully Threaded Steel Rod alumin 80 mm M3 (2 pcs)
1 x Fully Threaded Steel Rod SUS303 70mm M3 (2 pcs)
1 x 16x10 tree blades propeller Master Airscrew
1 x 290 mm 8x4 M4 shaft ship
1 x Pushrod octagone 4/3
1 x 3 mm Prop Adapter M6
1 x Fully Threaded Steel Rod Duralumin 130 mm M3 (2 pcs)
1 x Fully Threaded Steel Rod M2,5 (2 uds)
1 x Clamp K30 G3
1 x KingTech K45TP G4 Turboprop
1 x Filter KingTech
1 x Turbina KINGTECH K260 G4
1 x 20-25mm Servo Arm
2 x Wheel collar 4 mm Ø (4 uds)
1 x KingTech Turbineoil 1L
1 x Wheel collar 2 mm Ø (4 uds)
1 x Turbina KINGTECH K55G4
1 x Katana Mini carbon wheel pants (2 pcs)
1 x Servo Bolt M3x8 (8 pcs)
1 x Propeller APC 12x6 SF
1 x Aluminun wheel collar 6 mm Ø (4 uds)
1 x Aluminun wheel collar 2 mm Ø (4 uds)
1 x Aluminun wheel collar 5 mm Ø (4 uds)
1 x Propeller APC 13x4 Electric
1 x Propeller APC 12x6 Electric Pusher
1 x Blue aluminium servo arm V3-Hitec 1,25inch M3
1 x Blue Aluminium double servo arm V3-Hitec 3-3,5inch
1 x Blue aluminium double servo arm HITEC 40 mm M3 F3A
1 x Propeller APC 13x6.5 Electric
1 x Propeller APC 13x6.5 Electric Pusher
1 x Propeller APC 12x3.8 SF
1 x Propeller APC 13x8 Electric
1 x Propeller APC 12x8 SF
1 x Tail boom brace LOGO 480
1 x A/C quality beech plywood 600x300x6.0 mm
1 x Birch plywood plate 600x300x2.5 mm
1 x Hitec 20 mm servo arm
1 x XH male balance (2S) connector (2 pcs)
1 x FIALA Propeller 23x10
1 x XH male balance (4S) connector (2 pcs)
17,415.98EUR
Manufacturers
Manufacturer Info
UNILIHGT
UNILIHGT Homepage
Other products
Languages
Español English
Currencies