186.00EUR

PowerBox Smokepump JETs 2x outside
[POWER8015]


PowerBox Smokepump JETs 2x outside
Product description

The PowerBox Smokepump has been developed by PowerBox-Systems specifically for pumping smoke oil in model aircraft. The mechanical system and electronics are manufactured on our own premises, and the unit's high standard of quality is evident from its long effective life: the PowerBox Smokepump is the world's most durable smoke oil pump, as has been demonstrated in several long-term tests.

The mechanical pump system is assembled entirely from high-quality aluminium and brass parts. All our pumps are subjected to a running-in procedure during manufacture, ensuring that the gears mesh perfectly, and that the pump is 100% leak-free. Tight manufacturing tolerances eliminate the need for a separate cut-off valve with the PowerBox Smokepump.

The electronic circuit is infinitely variable within the range 0%-100%, allowing the pilot to fine-tune the flow rate to match the exact requirements of the model. The Smokepump can be powered either by a PowerBox or a separate battery.

If a separate battery is used, the electronic circuit switches to a "stand-by" mode if the receiver fails to pick up a signal. This means that it is not necessary to provide a separate switch to isolate the PowerBox Smokepump from the battery when you switch the model off.

The PowerBox Smokepump is available in a Standard version and a Jet version, the later with higher throughput and twin outlets.

The maximum flow rate of the Smokepump (Order No. 8010) is around 750 ml./min., while the Smokepump Jet (Order No. 8015) is capable of around 950 ml. The set includes all the necessary connecting leads and a length of heat-resistant hose. The standard set also contains a Y-piece which can be used to connect both silencers of an opposed-twin (boxer) engine.

Features
Durable metal-geared pump
Infinitely variable flow rate from 0-100%
No external cut-off valve required
High maximum flow rate
Can be operated directly from the receiver power supply
Stand-by cut-off when used with separate battery
Compact design
Low current drain
Mounting facility

Technical Data
Operating voltage 4.0V - 9.0V
Current drain Power-on state approx. 1.8 Ampere at 100%
Current drain Standby 10µA
Max. flow rate max. 950ml/min
Smoke medium Smokeöl „blue Max“ or 3W Smokeöl
Dimensions 79 x 31 mm
Weight 128g
Temperature range -30°C to +75°C


Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x V tail SILENT DREAM 2.200 mm (Elec or Glider)
1 x Ply-Span 450x600/13g White
1 x Spray adhesive AEROFIX 2
1 x Oracover Verde 2 m
1 x PVC transparent battery termo-retract 195 mm (1 m)
1 x Paint gun for sprays
1 x Hobbylite Filler, Balsa colour
1 x 19 mm 2:1 black termoretract tube
1 x 58 mm PVC transparent battery termo-retract 68 mm (1 m)
1 x Painting GHT Lexan Black 150 ml
1 x ABS angle 6,0x6,0x1000 mm
1 x 20 g tin paste
1 x ABS rectangular profile 12x6.0x1000 mm
1 x ASPIRE Navy ARF 2.000 mm
1 x SIG Coverall 1.2x0.9 m
1 x Brass rod Ø 1.0 mm x 1000 mm
1 x 1,2x1000 mm 2:1 black termoretract tube
1 x ABS angle 1.5x1.5x1000 mm
1 x Motor mount VANQUIST 48" F3A
1 x ASPIRE Red ARF 2.000 mm, Fuselage
1 x TS832 to Gopro AV/Power Cable DJI Phantom 2 Compatible
1 x Profile ABS Square 1 x 1000 mm
1 x Motor mount class 48"
1 x Profile ABS triangular 4.0x1000 mm 60º
1 x Solarfilm Lite blue transp. 5m
1 x Profile ABS half cane 2.5x1000 mm
1 x Xplorer3 anemometro
1 x Esc MasterBasic 40SB
1 x ABS Strip 1.5x4.0x1000 mm
1 x Xplorer4 anemometro
1 x 4,8x1000 mm 2:1 blue termoretract tube
1 x PVC yellow transparent battery termo-retract 69 mm (10 m)
1 x F9F COUGAR Grey ARF 1.562 mm
1 x PVC transparent battery termo-retract 85 mm (1 m)
2 x Crystal Universal RX 35.170 Ch 77
1 x MXS-C (Mini) Blue
1 x HAWKER HUNTER 1:5,8 Desert (1.770mm)
1 x Receiver Crystal 35 Mc/s Ch 62
2 x ESC YGE 90 HV F3A
1 x Solvent Plasti Dip 1000 ml
1 x ESC YGE 8 S
1 x Ply-Span 450x600/13g Black
1 x Cross Connector 4.0 mm x 1000 mm
1 x Big Crow DLE-170M
2 x F-16 Scale 1:6, Electric retract landing gear
1 x Coversion set HIROBO EX/EAGLE elektro
1 x Servo Controller Fibra optica
1 x 1000 ml sealer (DOPE)
1 x Crystal Universal RX 35.030 Ch 63
1 x ABS angle 2,0x2,0x1000 mm
1 x 2,4x1000 mm 2:1 green termoretract tube
1 x 12.7 mm 2:1 black termoretract tube
1 x Nose OPTIMA 2.200 mm (Elec or Glider)
1 x Straightened rod Ø 5.0 mm x 1000 mm
1 x PVC transparent battery termo-retract 51 mm (1 m)
1 x T-shape holder metal LAMA
1 x Spray adhesive INFUTAC (Clear) 500 ml
1 x Straightened rod Ø 4.0 mm x 1000 mm
1 x 2,4x1000 mm 2:1 black termoretract tube
1 x Crystal TX 35.180 Ch 78
1 x Ring support P-20 OPUS V-Jet 60mm
1 x Esc X-70-OPTO-Pro
1 x ABS angle 10,0x10,0x1000 mm
1 x Round Rod 6,0x1000 mm
1 x Stickers-digit for marking
1 x ABS "T" angle 2.0x2.0x1000 mm
1 x 500 ml sealer (DOPE)
1 x ODYSSEY Navy ARF 2.190mmSet Alas
1 x Crystal Universal RX 35.070 Ch 67
1 x Strip ABS 2.0x10.0x1000 mm
1 x Esc MasterSPIN 70 Pro OPTO
1 x 29,0 mm propeller (rigth propeller)
1 x Straightened rod Ø 5.5 mm x 1000 mm
1 x Esc X-30-Pro BEC
1 x TMM 1210-3S heli
1 x Rubber profile 6-2 mm 2M
1 x Strip ABS 2.0x8.0x1000 mm
1 x Parachute XTRALITE S
1 x Small Crow DLE-170M
1 x 36 mm white plastic spinner for fixed propeller
1 x Big-Malibu XL Roof box with surfboard rack GREY
1 x PVC termo-retract battery 45 mm transparent orange (1 m)
1 x Crystal RX 35.120 Ch 72
1 x 29x12 prop Super Silence
1 x ASPIRE Red ARF 2.000 mm
1 x XENON RC (Aero-naut)
1 x 28 mm turnbuckle
1 x BlueCom™ Adapter (Android / WP)
1 x 290 mm M4/4 mm Prop shaft
1 x Crystal Universal RX 35.040 Ch 64
1 x Streamline Stainless Steel Tubing 10.5x5.7x1000 m
1 x ODYSSEY Porsche ARF 2190 mm
1 x Crystal Universal RX 35.140 Ch 74
1 x Strip 3,5x1,75x330 mm
1 x Cable servo PREMIUM 1 m (blanco/rojo/negro) AWG21 + AWG26 TPE
1 x 36 mm red plastic spinner for fixed propeller
1 x 25,0 mm 3-BL M4 hydro-propeller (rigth hydropropeller)
16,342.58EUR
Manufacturers
Languages
Español English
Currencies