Top » Catalog » Acces. for Motors » Fuel/Smoke Pumps » POWER8015

186.00EUR

PowerBox Smokepump JETs 2x outside
[POWER8015]

Product description

The PowerBox Smokepump has been developed by PowerBox-Systems specifically for pumping smoke oil in model aircraft. The mechanical system and electronics are manufactured on our own premises, and the unit's high standard of quality is evident from its long effective life: the PowerBox Smokepump is the world's most durable smoke oil pump, as has been demonstrated in several long-term tests.

The mechanical pump system is assembled entirely from high-quality aluminium and brass parts. All our pumps are subjected to a running-in procedure during manufacture, ensuring that the gears mesh perfectly, and that the pump is 100% leak-free. Tight manufacturing tolerances eliminate the need for a separate cut-off valve with the PowerBox Smokepump.

The electronic circuit is infinitely variable within the range 0%-100%, allowing the pilot to fine-tune the flow rate to match the exact requirements of the model. The Smokepump can be powered either by a PowerBox or a separate battery.

If a separate battery is used, the electronic circuit switches to a "stand-by" mode if the receiver fails to pick up a signal. This means that it is not necessary to provide a separate switch to isolate the PowerBox Smokepump from the battery when you switch the model off.

The PowerBox Smokepump is available in a Standard version and a Jet version, the later with higher throughput and twin outlets.

The maximum flow rate of the Smokepump (Order No. 8010) is around 750 ml./min., while the Smokepump Jet (Order No. 8015) is capable of around 950 ml. The set includes all the necessary connecting leads and a length of heat-resistant hose. The standard set also contains a Y-piece which can be used to connect both silencers of an opposed-twin (boxer) engine.

Features
Durable metal-geared pump
Infinitely variable flow rate from 0-100%
No external cut-off valve required
High maximum flow rate
Can be operated directly from the receiver power supply
Stand-by cut-off when used with separate battery
Compact design
Low current drain
Mounting facility

Technical Data
Operating voltage 4.0V - 9.0V
Current drain Power-on state approx. 1.8 Ampere at 100%
Current drain Standby 10µA
Max. flow rate max. 950ml/min
Smoke medium Smokeöl „blue Max“ or 3W Smokeöl
Dimensions 79 x 31 mm
Weight 128g
Temperature range -30°C to +75°C

under request

Reviews

Quick Find

Shopping Cart

2 x	Fixed launching hook
2 x	Balsa panel 2.5x100x1000 mm
1 x	1/12 Pilot "Tom"
2 x	Brass rod Ø 0.5 mm x 1000 mm
1 x	Silent-blocks DLE 170M
1 x	"M" set
1 x	Breatex™ Non-woven absorber 150 g/m² Roll 5 m
1 x	Neck strap JETI DS
1 x	Straightened rod Ø 1.0 mm x 1000 mm
1 x	A/C quality beech plywood 1520x750x4.0 mm
1 x	Windsock Ozone L - 700 mm
1 x	ABS Strip 1.0x3.0x1000 mm
1 x	Big-Malibu XL Roof box with surfboard rack GREY
1 x	Carbon fibre sleeve 12k 170 mm x 5m
1 x	67 mm cylidric hinge Ø 5 mm (4 pcs)
1 x	Aluminum Bayonet / strongal D25 mm / 1 m
1 x	Brass hexagonal rod Ø 4 mm x 1000 mm
1 x	Strip ABS 2.0x5.0x1000 mm
1 x	Blue smoke canister 100 g
1 x	Ball link M2,5 (10 pcs)
2 x	Motor DLE 430 cc - Paramotors
1 x	Straightened threaded rod M3 - 1m
2 x	LUCAS pilot ARTF
1 x	BALSA trip 4.0x4.0x1000 mm
1 x	Aluminum Bayonet / strongal D12 mm / 0.5 m
1 x	Round Rod 1,0x1000 mm
1 x	Short ball link M1.6 (6 uds)
1 x	Camera Sony 4140+673 CCD with Built-in 200mw TX + antenna
1 x	Short ball link M3 (6 uds)
1 x	Stickers-digit for marking
1 x	Protective Cover for wires Ø 15 mm 1000 mm
1 x	Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m
1 x	Long pinned hinge (12 uds)
1 x	Joint with bearing M2 22x5,5
2 x	Adjustable launching hook
1 x	Initior Transmitter FTX2 Wireless
1 x
1 x	Gates hinge 30x16 mm (2 pcs)
1 x	Windsock Ozone L -1200 mm
1 x	Round Rod 3,0x1000 mm
1 x	Red silicone 1,0 qmm wire (50 m)
1 x	Squared carbon wing joinner 5x5x220 mm
1 x	M3 Maxi ball link (2 uds)
1 x	ABS Strip 1.0x2.0x1000 mm
1 x	Short ball link M2 (6 uds)
1 x	Motor DLE 200cc Std
1 x	Flap hinge 33x9 mm (6 pcs)
1 x	Fast'n EZ-CA-Hinge (12 uds)
1 x	Blue metalic ball link M3/3 azul (2 pcs)
1 x	ABS Strip 1.5x6.0x1000 mm
1 x	Gates hinge aluminium (1 pcs)
1 x	Tow hook for tug
1 x	M2,5 Diam metal short ball link V3 (2 pcs)
1 x	PVC 0,14 qmm servos wire Hitec/Mpx (5 m)
1 x	Smoke set "Glider"
1 x	Socket head ball link M3 (2 uds)
1 x	Green smoke canister 100 g
1 x	Remote electric ignition system
1 x	Round Rod 2,0x1000 mm
1 x	Paint gun for sprays
1 x	Militarian pilot "Kamikaze" size 9cm (Slimline)
1 x	Cable set PREMIUM, SUB-Done 4three fuselage/wing 160 cm
1 x	ABS 500 x 400 x 0,5 mm (white)
1 x	1/12 Pilot "Langley"
1 x	White smoke bombs AX-18 (5 pcs)
1 x	Protective open Cover for wires Ø 13 mm 1000 mm
1 x	White smoke canister 140 g
1 x	1000 ml sealer (DOPE)
1 x	Protective Cover for wires Ø 6 mm 1000 mm
1 x	Pin type hinge Al 4,5x70 mm demount (2 pcs)
1 x	6 mm hexagonal ball link M3 (10 pcs)
1 x	Spray adhesive AEROFIX 2
1 x	M3 Maxi ball link (2 uds)
1 x	Buy Perforated film 100 cm / 10 m
1 x	Plasti Dip Liquid Tape 429 ml black
1 x	Round Rod 1,5x1000 mm
1 x	Micro flex hinge (12 uds)
1 x	Civilian pilot "G-Man" size 9cm (Slimline)
1 x	Nylon hinge 20x15x0,3 (10 pcs)
1 x	Para-RC Trike "RC-Bullix"
1 x	M3/5 Diam metal short ball link V3 (2 pcs)
1 x	Pilot JAN 1/4 Saiplanes
1 x	Balsa panel 1.0x100x1000 mm
1 x	25 mm reinforced hinge
1 x	BALSA triangular 10x10x1000 mm
1 x	Aluminium rod Ø 4.0 mm x 3000 mm
1 x	Red smoke canister 100 g
1 x	Green smoke canister 140 g
1 x	1/6 Pilot "Tony"
1 x	Pipa 3D BULL MØ1 2.600mm
1 x	48 x 10 mm cylidric hinge Ø 3,0 mm (10 pcs)
1 x	Cap closure 33/23.5mm (2 uds)
1 x	Motor Mega AC 16/10/03 RACE
1 x	1/4 Pilot "Heidi"
1 x	1/4 Pilot "Mike"
1 x	Brass hexagonal rod Ø 5 mm x 1000 mm
1 x	Nylon hinge for flaps 33x9 (2 pcs)
1 x	Straightened rod Ø 0.8 mm x 1000 mm
1 x	Balsa panel 10x100x1000 mm
1 x	Wing OXY 5,0 m2
1 x	Parachute P4
1 x	Breatex™ Non-woven absorber 150 g/m² Roll 100m
1 x	Presto SF Light Filler styrene-free (420 g)
1 x	Carbon fiber flat 1000x3.0x0.5 mm
1 x	Festo 6mm Tubing Holder (10 uds)
1 x	Strip 2,0x2,0x330 mm
1 x	White smoke canister 100 g
1 x	MAX pilot ARTF
1 x	Strip ABS 2.0x3.0x1000 mm
1 x	Wing-connector: Glass / Carbon tube (13.7/12.5) x 1000 mm
1 x	Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m
1 x	Black silicone 1,0 qmm wire (50 m)
1 x	Carbon fiber flat 1000x3.0x0.13 mm
1 x	Carbon fibre sandwich sheet 350x150x3 mm
1 x	48 mm cylidric hinge Ø 2,5 mm (5 pcs)
1 x	76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
1 x	Silicone 0,25 qmm servos wire Graupner (100 m)
1 x	ABS I Strip 20x10x1000 mm
1 x	Carbon fiber flat 1000x3.0x1.0 mm
1 x	PVC 0,08 qmm Graupner servos wire (5 m)
1 x	Paramotor BackPack XXS (without accessories)
1 x	Straightened rod Ø 4.5 mm x 1000 mm
1 x	White smoke bombs AX-9 (10 pcs)
1 x	Carbon fiber rod 12 mm x 1000 mm
1 x	Birch plywood plate 600x300x4.0 mm
1 x	ABS Strip 1.0x4.0x1000 mm
1 x	1/6 Pilot "Buddy"
1 x	Strip ABS 2.0x10.0x1000 mm
1 x	ABS 500 x 400 x 1 mm (white)
1 x	Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m
1 x	Silicone 0,14 qmm servos wire Graupner (100 m)
1 x	Green silicone 0,25 qmm wire (50 m)
1 x	Ventus 1:4 set of instruments
1 x	Para-RC Mix
1 x	Carbon fiber rod 0.5 mmx1000 mm
1 x	M2,5 5Diam metal ball link V3 (2 pcs)
1 x	PCARD Wireless System
1 x	quality beech plywood BIRCH 600x300x2.0 mm
1 x	M2/M1/6 3Diam short black ball link V1 (2 pcs)
1 x	"S" set for planes
1 x	B4-0 rocket charges (6 pcs)
1 x	Round Rod 4,0x1000 mm
1 x	Balsa panel 5.0x100x1000 mm
1 x	Nylon hinge 20x20x0,3 (10 pcs)
1 x	Xplorer2 anemometro
1 x	Motor DLE 200cc Premium Muffler
1 x	Shirt Hispano Aviación
1 x	Brass rod Ø 1.0 mm x 1000 mm
1 x	Xplorer4 anemometro
1 x	Carbon fiber rod 2.5 mmx1000 mm
1 x	Strip 1,5x1,5x330 mm
1 x	67 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
1 x	A/C quality beech plywood 600x300x5.0 mm
1 x	Carbon fiber rod 20 mmx1000 mm
1 x	Pin type hinge Al 6x98 mm (2 pcs)
1 x	Cable servo PREMIUM 1 m (blanco/rojo/negro) AWG21 + AWG26 TPE
1 x	White smoke bombs AX-3 (10 pcs)
1 x	Balsa panel 1.5x100x1000 mm
1 x	Ball link M1.6 (6 uds)
1 x	Opale Rucksack
1 x	Protective Cover for wires Ø 6 mm 1000 mm
1 x	Buy Perforated film 145 cm / 50 m
1 x	BALSA trip 2.0x2.0x1000 mm
1 x	Micro clevis (10 uds)
1 x	CAM-Carbon Light Prop 10x4.5" (Prop right)
1 x	PVC 0,25 qmm 4 line servos wire JR/Graupner (5 m)
1 x	ABS 500 x 400 x 2,0 mm (white)
1 x	Pin hinge 26x11 mm (10 uds)
1 x	Joint with bearing M3 22x5,5
1 x	Carbon fiber rod 3.0 mm x 1000 mm
1 x	A/C quality beech plywood BIRCH 600x300x1.0 mm
1 x	Rescue 1,8m2 / BackPack
1 x	Civilian pilot "Joe" size 9cm (Slimline)
1 x	Brass rod Ø 1.5 mm x 1000 mm
1 x	M2,5 5Diam short black ball link V2 (2 pcs)
1 x	ABS Strip 1.5x2.0x1000 mm
1 x	White smoke bombs AX-60 (5 pcs)
1 x	Pin type hinge Al 4,5x70 mm to wire (2 pcs)
1 x	1/10 Pilot "Jack"
1 x	ABS Strip 1.5x3.0x1000 mm
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 10 m
1 x	Carbon fiber rod 1.5 mm x 1000 mm
1 x	Towing hook
1 x	M2,5 / 5Diam metal short ball link V3 (2 pcs)
1 x	Silicone 0,25 qmm servos wire Graupner (5 m)
1 x	Cabel PVC 2 x 0.25 mm2 (5 m) red-black
1 x	Long ball link M1.6 (6 uds)
1 x	Plasti Dip Liquid Tape 429 ml black
1 x	Protective Cover for wires Ø 20 mm 1000 mm
1 x	Motor DLE 170 M- Paramotors
1 x	BALSA trip 5.0x5.0x1000 mm
1 x	Birch plywood plate 600x300x3.0 mm
1 x	Gates hinge black 30x16 mm (2 pcs)
1 x	Green silicone 0,25 mm² wire (25 m)
1 x	Straightened rod Ø 5.5 mm x 1000 mm
1 x	Balsa panel 6.0x100x1000 mm
1 x	Towing hook <3m
1 x	Gates hinge
1 x	"S" set for boats
2 x	Pilot "Dick" Legends Series (Slimline)
1 x	500 ml sealer (DOPE)
1 x	Towing hook
1 x	Carbon wing joinner 13,4 mm Ø 0,48 mm
1 x	3l Smoke oil
1 x	Indoor hinge with servo arm integraded
1 x	SPARK Switch 7.4v
1 x	Paramotor Trike XL
1 x	USB Mini Camera endoscope
1 x	Red smoke canister 65 g
1 x	Civilian pilot "Curt" size 9cm (Slimline)
1 x	Fast'n EZ-CA-Hinge, lite (12 uds)
1 x	Blue silicone 0,5 qmm wire (50 m)
1 x	1/12 Pilot "Cougar"
1 x	Carbon fiber rod 8.0 mmx1000 mm
1 x	ABS Strip 1.0x5.0x1000 mm
1 x	M2/M1/6 3Diam short black ball link V1 (6 pcs)
1 x	PVC 0,08 qmm Futaba servos wire (5 m)
1 x	6 mm Quick clamp_S (10 pcs)
1 x	PVC 0,14 qmm servos wire Graupner (100 m)
1 x	Strip 2,5x1,25x330 mm
1 x	Parachute BACKUP X100
1 x	Vest clothes Hispano Aviación
1 x	Softshell Hispano Aviación
1 x	PVC 0,14 qmm servo wire Futaba (5 m)
1 x	Nylon hinge for flaps/gates 27x10,5 (2 pcs)
1 x	FunCup XL RR
1 x	Carbon fiber rod 2.0 mmx1000 mm
1 x	Black spiral protective cover for wires Ø 0,5/50 mm - 25 m
1 x	Solvent Plasti Dip 1000 ml
1 x	Nitroverdu 500 ml
1 x	M2/M1/6 3Diam long black ball link V1 (6 pcs)
1 x	A/C quality beech plywood 600x300x0.6 mm
1 x	Blue smoke canister 140 g
1 x	M3/5Diam metal ball link V3 (2 pcs)
1 x	Piloto Jet "Red" 1/6 Scale
1 x	A/C quality beech plywood 600x300x0.8 mm
1 x	Beech dowels 3.0 x 1000 mm
1 x	18 mm reinforced hinge
1 x	Cable Cargador FUTABA
1 x	5 line servos wire black (1 m)
1 x	Flap hinge (6 pcs)
1 x	A/C quality beech plywood 1520x750x3.0 mm
1 x	Brass rod Ø 0.8 mm x 1000 mm
1 x	Beech dowels 2.0 x 1000 mm
1 x	Straightened rod Ø 3.0 mm x 1000 mm
1 x	Parachute PV6 for F3J
1 x	Pilot "Anthony" (Slimline)
1 x	A/C quality beech plywood 498x247x1.2 mm
1 x	Long pinned hinge (6 uds)
1 x	Wing OXY 0,5 pulgadas2
1 x	ABS I Strip 10x5x1000 mm
1 x	Brass hexagonal rod Ø 3 mm x 1000 mm
1 x	Straightened rod Ø 1.5 mm x 1000 mm
1 x	M2/M1/6 3Diam long black ball link V1 (2 pcs)
1 x	MEGA AC 16/10/03 Race + PG 5:1 F5J motor brushless
1 x	Black silicone 0,25 mm² wire (25 m)
1 x	AX-60 starters (5 pcs)
1 x	Xplorer3 anemometro
1 x	Cylidric hinge 33 mm Ø 2 mm (5 pcs)
1 x	Oracover Green10 m
1 x	Mixers smoke bombs AX-60 (5 pcs)
1 x	800TVL CMOS camera for FPV
1 x	M2,5 5Diam black ball link V2 (2 pcs)
1 x	BALSA triangular 15x15x1000 mm
1 x	Initior Receiver FRX2 Wireless
1 x	Protective Cover for wires Ø 10 mm 1000 mm

28,327.16EUR