Inicio » Catálogo » Acces. para Motores » Bombas de combustible/humo » POWER8015

186.00EUR

Bomba de humo JETs PowerBox 2 salidas
[POWER8015]

Product description

The PowerBox Smokepump has been developed by PowerBox-Systems specifically for pumping smoke oil in model aircraft. The mechanical system and electronics are manufactured on our own premises, and the unit's high standard of quality is evident from its long effective life: the PowerBox Smokepump is the world's most durable smoke oil pump, as has been demonstrated in several long-term tests.

The mechanical pump system is assembled entirely from high-quality aluminium and brass parts. All our pumps are subjected to a running-in procedure during manufacture, ensuring that the gears mesh perfectly, and that the pump is 100% leak-free. Tight manufacturing tolerances eliminate the need for a separate cut-off valve with the PowerBox Smokepump.

The electronic circuit is infinitely variable within the range 0%-100%, allowing the pilot to fine-tune the flow rate to match the exact requirements of the model. The Smokepump can be powered either by a PowerBox or a separate battery.

If a separate battery is used, the electronic circuit switches to a "stand-by" mode if the receiver fails to pick up a signal. This means that it is not necessary to provide a separate switch to isolate the PowerBox Smokepump from the battery when you switch the model off.

The PowerBox Smokepump is available in a Standard version and a Jet version, the later with higher throughput and twin outlets.

The maximum flow rate of the Smokepump (Order No. 8010) is around 750 ml./min., while the Smokepump Jet (Order No. 8015) is capable of around 950 ml. The set includes all the necessary connecting leads and a length of heat-resistant hose. The standard set also contains a Y-piece which can be used to connect both silencers of an opposed-twin (boxer) engine.

Features
Durable metal-geared pump
Infinitely variable flow rate from 0-100%
No external cut-off valve required
High maximum flow rate
Can be operated directly from the receiver power supply
Stand-by cut-off when used with separate battery
Compact design
Low current drain
Mounting facility

Technical Data
Operating voltage 4.0V - 9.0V
Current drain Power-on state approx. 1.8 Ampere at 100%
Current drain Standby 10µA
Max. flow rate max. 950ml/min
Smoke medium Smokeöl „blue Max“ or 3W Smokeöl
Dimensions 79 x 31 mm
Weight 128g
Temperature range -30°C to +75°C

Bajo pedido

Comentarios

Búsqueda Rápida

Cesta de Compras

2 x	Bisagra cilíndrica 4,5 Ø x 12 x 67 mm (10 pcs)
1 x	Bisagra de nylon 15x0,3 (10 pcs)
2 x	Bisagra larga con pin metalico (12 uds)
1 x	Perfil de ABS "L" 6,0x6,0x1000 mm
1 x	Listón de BALSA 4,0x4,0x1000 mm
2 x	Bisagra de Flaps (6 uds)
1 x	Listón triangular de BALSA 10x10x1000 mm
2 x	Perfil de ABS triangular 4.0x1000 mm 60º
2 x	Bisagra cilíndrica 3,0 Ø x 10 x 48 mm (10 pcs)
1 x	Perfil de ABS "T" 6.0x6.0x1000 mm
1 x	Listón de HAYA redondo 3,0 x 1000 mm
1 x	Soporte soldadura universal aluminio
1 x	Soporte lija 25 mm
1 x	Conector banana oro 4 mm (Ultralight)
1 x	Destornillador allen 2,5x60 mm molibdeno
1 x	Plancha contrachapado Abedul 600x300x5,0 mm
1 x	Listón de BALSA 2,0x2,0x1000 mm
1 x	Liston ABS H 1,5x1,5x330 mm
1 x	Perfil de ABS "L" 5,0x5,0x1000 mm
2 x	Perfil de ABS "L" 10,0x10,0x1000 mm
1 x	Bisagra Micro flexible (12 uds)
3 x	Perfil de ABS cuadrado 1 x 1000 mm
2 x	Conector MULTIPLEX hembra 30 cm
2 x	Conector banana oro 2 mm (Ultralight)
1 x	Disco Corte Proxxon/Dremmel 22 mm
2 x	Conector ABS "CRUZ" 4.0 mm x 1000 mm
1 x	Bisagra cilíndrica 67 mm Ø 5 mm (4 pcs)
1 x	Perfil de ABS rectangular 10x5,0x1000 mm
1 x	Plancha de balsa 1,0x100x1000 mm
2 x	Conector ABS "H" 4.0 mm x 1000 mm
2 x	Perfil de ABS "L" 2,0x2,0x1000 mm
1 x	Bisagra larga con pin metalico (6 uds)
1 x	Conector JAPAN G2 Set 5 pares
1 x	Fresa corte diamante Ø 2.35mm (lentil)
1 x	Fresa corte diamante Ø 1.4mm (bola)
1 x	Varilla ABS 5,0x1000 mm
1 x	Listón triangular de BALSA 15x15x1000 mm
1 x	Bisagra papel lite CA (12 uds)
1 x	Liston ABS 1,5x4,0x1000 mm
1 x	Liston ABS I 20x10x1000 mm
2 x	Perfil de ABS de media caña 2,5x1000 mm
1 x	Destornillador allen 1,5x50 mm molibdeno
1 x	Liston ABS 2.0x10.0x1000 mm
1 x	Plancha de balsa 10x100x1000 mm
1 x	Recambio lonas Hovercraft
1 x	Liston ABS 1,0x5,0x1000 mm
1 x	Conector banana oro 3 mm
1 x	Plasti Dip Liquid Tape 429 ml rojo
2 x	Perfil de ABS cuadrado 4 x 1000 mm
1 x	Anemometro Xplorer4
1 x	Plancha de balsa 2,0x100x1000 mm
1 x	Liston ABS 1,0x3,0x1000 mm
1 x	Bisagra cilíndrica 2,5 Ø x 8 x 33 mm (10 pcs)
1 x	Liston ABS 1,0x2,0x1000 mm
1 x	Varilla ABS 3,0x1000 mm
1 x	Anemometro Xplorer3
1 x	Perfil de ABS de media caña 7,0x1000 mm
1 x	Plancha de balsa 5,0x100x1000 mm
2 x	Conector ABS "L" 1.5 mm x 1000 mm
1 x	Conector banana oro 8,0 mm. 5 pcs (macho)
1 x	Conector FUTABA Servo hembra BLUE silicon (10 pcs)
1 x	Anemometro Xplorer2
2 x	Perfil de ABS de media caña 4x2.5x1000 mm
1 x	Liston ABS 1,0x4,0x1000 mm
1 x	Conector banana oro 8,0 mm 5 pcs (hembra)
1 x	Plancha contrachapado Abedul 600x300x1,5 mm
1 x	Perfil de ABS cuadrado 3 x 1000 mm
1 x	Crimpadora
1 x	Alicate para "Ball-Link"
1 x	Molde conector Dean-T
1 x	Bisagra 25 mm reforzada
2 x	Perfil de ABS de media caña 5,0x1000 mm
1 x	Conector banana oro 2,5 mm (100 parejas)
1 x	Plasti Dip Liquid Tape 429 ml negro
1 x	Spray grafito 33
2 x	Conector ABS "L" 4.0 mm x 1000 mm
1 x	Motor A2212/13T
1 x	Dremel 3000 130W
1 x	Varilla ABS 1,0x1000 mm
1 x	Liston ABS 2.0x8.0x1000 mm
1 x	Bolsas inyectoras desechables (30x16cm) 100 pcs
1 x	Me-163
1 x	Perfil de ABS triangular 2.0x1000 mm 90º
1 x	Bisagra de nylon flaps/compuertas 27x10,5 (2 pcs)
1 x	Conector banana oro 8,0 mm
2 x	Perfil de ABS de media caña 4x1000 mm
1 x	Perfil goma 10-2 mm 2M
1 x	Fresa corte diamante Ø 2.35mm (flame)
1 x	e-Looger V3
1 x	Plancha de balsa 3,0x100x1000 mm
1 x	Funda conector 2 mm
1 x	Bisagra pin 39x20 mm (10 uds)
1 x	Bisagra de aluminio tipo PIN 6x98 mm (2 pcs)
1 x	Bisagra de compuerta negra 30x16 mm (2 pcs)
2 x	Perfil de ABS cuadrado 2 x 1000 mm
1 x	Perfil de ABS "T" 8.0x8.0x1000 mm
1 x	Liston ABS 1,5x6,0x1000 mm
1 x	Disolvente barniz tensor 500 ml
1 x	Varilla ABS 6,0x1000 mm
1 x	Pistola para botes de pintura
1 x	Bisagra de compuerta/Flaps
1 x	Conector MPX negro hembra
1 x	Conector DEANS hembra 30 cm
1 x	Conector JR/Uni Servo macho BLUE silicon (10 pcs)
1 x	Alicate para "Ball-Link"
1 x	Plancha contrachapado Abedul 1520x750x3,0 mm
1 x	Conector "T" 6-6-6 mm tubo bomba vacio
1 x	Set bisagras indoor con horns integrados
1 x	Perfil goma 8-2 mm 2M
1 x	Plancha contrachapado Abedul 600x300x2,0 mm
1 x	Mango para lima PERMAGRIT
1 x	Fresa corte diamante Ø 2.7mm (bola)
1 x	Conector BEC macho (10 pcs)
1 x	Conector FUTABA Servo hembra (10 pcs)
1 x	Varilla ABS 2,0x1000 mm
1 x	Bisagra 15 mm reforzada
1 x	Cera desmoldeante 650 g
1 x	Tijeras curvas 16cm - GFK/CFK/Aramid
2 x	Perfil de ABS de media caña 8,0x1000 mm
1 x	Juego llaves allen Extra-duro Titanium (1.5/2.0/2.5/3.0)
1 x	Bisagra cilíndrica 2,5 Ø x 10 x 43 mm (10 pcs)
2 x	Perfil de ABS "L" 1.5x1.5x1000 mm
1 x	Conector banana oro 0,8 mm
1 x	Copiador 5 unidades de 20 cm
1 x	Bisagra de aluminio tipo PIN 4,5x70 mm (2 pcs)
1 x	Conector 2 mm hembra (2 pcs) con conector de seguridad
1 x	Liston ABS I 2,5x1,25x330 mm
1 x	Plancha contrachapado 498x247x2.0 mm
1 x	Perfil de ABS de media caña 2,0x1000 mm
1 x	Plancha de balsa 1,5x100x1000 mm
1 x	Varilla ABS 4,0x1000 mm
1 x	Perfil de ABS triangular 4.0x1000 mm 90º
1 x	Bisagra papel CA (12 uds)
1 x	Bisagra de aluminio tipo PIN 4,5x70 mm desmontable (2 pcs)
1 x	Pasta para estaño 20 g
1 x	Relleno Presto SF Light Filler styrene-free (420 g)
1 x	Liston ABS 2.0x3.0x1000 mm
1 x	Conector DEANS 4 pines (1 par)
1 x	Plancha contrachapado Abedul 600x300x0,6 mm
1 x	Bascula precision 0.1-2000 g
1 x	Bisagra de compuerta 30x16 mm (2 pcs)
1 x	Copiador 2 unidades de 20 cm
1 x	Tijera curva PREMIUM 16 cm
1 x	Liston ABS I 3,5x1,75x330 mm
2 x	Bisagra de Flaps 33x9 mm (6 uds)
1 x	Liston ABS 1,5x3,0x1000 mm
1 x	Plancha contrachapado Abedul 1520x750x4,0 mm
1 x	Liston ABS H 2,0x2,0x330 mm
1 x	Bisagra cilíndrica 43 mm Ø 2,5 mm (5 pcs)
1 x	Pasta universal color blanco 50 g
1 x	Pasta universal color Jet Black 250 g
1 x	Perfil Acero Inox. 10.5x5.7x1000 mm
1 x	Destornillador allen 3,0x60 mm molibdeno
1 x	Bisagra cilíndrica 33 mm Ø 2 mm (5 pcs)
1 x	Bisagra de aluminio tipo PIN 3,0x50 mm (2 pcs)
1 x	Plasti Dip Liquid Tape 429 ml naranja
1 x	Perfil de ABS "L" 3,0x3,0x1000 mm
1 x	Lima fina PERMAGRIT para Dremel
1 x	Listón de HAYA redondo 4,0 x 1000 mm
1 x	Plancha contrachapado ABEDUL 600x300x1,0 mm
1 x	Relleno balsa HobbyLite
1 x	Perfil goma 6-2 mm 2M
1 x	Ahesivo en spray AEROFIX 2
1 x	Plancha para entelar
1 x	Plancha contrachapado 498x247x1,2 mm
1 x	Bisagra de nylon 20x20x0,3 (10 pcs)
1 x	Plancha de balsa 8,0x100x1000 mm
1 x	Conector CAN 15
1 x	Conector micro DEANS (T)
1 x	Perfil de ABS "L" 4,0x4,0x1000 mm
1 x	Tapaporos 500 ml (DOPE)
1 x	Perfil de ABS rectangular 12x6,0x1000 mm
1 x	Perfil de ABS "T" 10.0x10.0x1000 mm
1 x	Perfil de ABS "T" 4.0x4.0x1000 mm
1 x	Tijera electrica
1 x	Conector banana oro 4 mm
1 x	Conector JR Servo macho (10 pcs)
1 x	Bisagra cilíndrica 48 mm Ø 2,5 mm (5 pcs)
1 x	Conector JR/Uni Servo hembra BLUE silicon (10 pcs)

2,672.17EUR