| 1 x | Monokote BLUE metalizado (1.8x0.65m) |
| 3 x | Round Rod 2,5x1000 mm |
| 3 x | Strip ABS 2.0x5.0x1000 mm |
| 2 x | ABS Strip 1.5x3.0x1000 mm |
| 2 x | Aluminium M2x12 mm screw (4 pcs) |
| 2 x | CellPRO 4S Adaptader (GP/KO up to 4S) |
| 1 x | ABS I Strip 10x5x1000 mm |
| 1 x | Vacuum pump 12 CFM |
| 2 x | Vacuum pump P1-N |
| 3 x | Carbon fiber rod 1.5 mm x 1000 mm |
| 1 x | 6 mm hexagonal ball link M3 (10 pcs) |
| 2 x | Strip 3,5x1,75x330 mm |
| 1 x | ABS rectangular profile 12x6.0x1000 mm |
| 1 x | Digital scale up to 40 kg |
| 2 x | Hobbylite Filler, Balsa colour |
| 1 x | Carbon fiber rod 6.0 mmx1000 mm |
| 1 x | EC5-Set female, simple quality, 2 x female pin, 1 x blue housing |
| 2 x | ABS tube 14.0x10.0x1000 mm |
| 3 x | A/C quality beech plywood 600x300x1.5 mm |
| 3 x | Me-163 |
| 1 x | PVC 0,08 qmm Graupner servos wire (5 m) |
| 1 x | ABS angle 3,0x3,0x1000 mm |
| 2 x | Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm) |
| 1 x | EC5-Set male, simple quality, 2 x female pin, 1 x blue housing |
| 2 x | Paint gun for sprays |
| 1 x | Carbon fiber flat 1000x3.0x0.13 mm |
| 2 x | 55% silver electrodes (2 pcs) |
| 4 x | Aluminium tube (L 1000 mm, Ø3.0 mm, Ø2.1 mm) |
| 1 x | M2/M1/6 3Diam long black ball link V1 (6 pcs) |
| 1 x | Aluminium wide washer M3 red (4 pcs) |
| 1 x | Silicone 0,35 qmm servos cable Futaba (5 m) |
| 1 x | 500 ml sealer (DOPE) |
| 1 x | Anodized aluminium M3x0,5x20 mm Sokect Head screw (4 blue pcs) |
| 2 x | M3 INDUSTRIAL ball link (2 uds) |
| 1 x | "Y" charging 4mm wire (2 IN-1 OUT). |
| 3 x | Aluminium tube (L 1000 mm, Ø5.0 mm, Ø4.1 mm) |
| 1 x | Profile ABS Square 1 x 1000 mm |
| 1 x | XT-60 connector (male) |
| 2 x | Hot Glue Stick RED |
| 2 x | Anodized alum. M4x0,7x20 mm Flat Head screw (4 lilac pcs) |
| 1 x | Vest clothes Hispano Aviación |
| 2 x | Balsa panel 6.0x100x1000 mm |
| 2 x | ABS tube 8.0x6.0x1000 mm |
| 1 x | 2 mm female connector (2 pcs) with safety connector |
| 2 x | Circlick securite |
| 1 x | Anodized alum. M4x0,7x25 mm Button Head screw (4 blue pcs) |
| 3 x | ABS tube 5.0x4.0x156 mm |
| 2 x | |
| 1 x | Carbon tube (L 1000 mm, Ø18 mm, Ø16 mm) |
| 3 x | 3 LiPo XH>EH adapter |
| 1 x | Fresa corte diamante Ø 1.0mm (bola) |
| 3 x | ABS tube 4.0x2.0x1000 mm |
| 2 x | ABS tube 9.0x8.0x1000 mm |
| 3 x | ABS tube 3.0x2.0x330 mm |
| 2 x | Tow hook for tug |
| 1 x | M2/M1/6 3Diam long black ball link V1 (2 pcs) |
| 2 x | ABS Strip 1.0x5.0x1000 mm |
| 2 x | ABS tube 9.0x7.0x1000 mm |
| 2 x | Hot Glue Stick GREEN |
| 1 x | Hexagonal ball head 2.0 x 50 mm |
| 1 x | BALSA trip 5.0x5.0x1000 mm |
| 1 x | ABS Strip 1.5x2.0x1000 mm |
| 2 x | Carbon fiber rod 14 mmx1000 mm |
| 1 x | Carbon fiber rod 2.0 mmx1000 mm |
| 1 x | Copier 5x20 cm pcs |
| 1 x | Connectors banna oro 6,0 mm (M/F) |
| 2 x | Aluminum Bayonet / strongal D25 mm / 1 m |
| 3 x | ABS tube 10.0x8.0x1000 mm |
| 1 x | Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm) |
| 1 x | Cable Cargador FUTABA |
| 1 x | XH female balance (2S) connector (2 pcs) |
| 2 x | ABS tube 7.0x6.0x1000 mm |
| 2 x | 1 m servo "Premium" wire (white/red/blue) |
| 6 x | ABS tube 5.0x3.0x1000 mm |
| 2 x | Profile ABS half cane 4x2.5x1000 mm |
| 1 x | Cross Connector 4.0 mm x 1000 mm |
| 1 x | 2 LiPo XH>EH adapter |
| 1 x | Tube bender |
| 1 x | Fixed launching hook |
| 1 x | Connectors banna gold 5,5 mm (M/F) |
| 5 x | Painting GHT Lexan Black 150 ml |
| 3 x | Silicone black 0,5 qmm wire ( 1 m) |
| 3 x | M2/M1/6 3Diam short black ball link V1 (2 pcs) |
| 1 x | Rubber profile 10-2 mm 2M |
| 1 x | Double conector with JR adapter and 200 mm extension |
| 1 x | Beech dowels 2.0 x 1000 mm |
| 2 x | Xplorer3 anemometro |
| 5 x | Carbon fiber rod 7.0 mmx1000 mm |
| 1 x | Profile ABS half cane 5.0x1000 mm |
| 2 x | Xplorer2 anemometro |
| 1 x | Blue metalic ball link M3/3 azul (2 pcs) |
| 2 x | M2,5 / 5Diam metal short ball link V3 (2 pcs) |
| 2 x | Silicone 0,14 qmm servos wire Graupner (5 m) |
| 1 x | Connectors banna oro 4 mm (M/F) |
| 3 x | ABS Strip 1.5x6.0x1000 mm |
| 1 x | PVC 0,14 qmm servo wire Futaba (5 m) |
| 1 x | Silicone red 0,25 mm² wire (25 m) |
| 1 x | Ball link M3 (10 pcs) |
| 1 x | Disposable Injector Bags (30x16cm) 100 pcs |
| 1 x | 30 cm DEANS female connector |
| 1 x | Motor DLE 200cc Premium Muffler |
| 3 x | Carbon rectangular rod 3.0 mm x 1.0 x 1000 mm |
| 1 x | Banna gold connector 2,5 mm (M/F) |
| 1 x | Profile ABS half cane 6.0x1000 mm |
| 1 x | SyRen 50A 6V-30V Regenerative Motor Driver |
| 2 x | Balsa panel 2.5x100x1000 mm |
| 1 x | 22 mm Cut Disc Proxxon/Dremmel |
| 1 x | Ball link M3 (6 uds) |
| 3 x | Aluminium wide washer M4 Red (4 pcs) |
| 2 x | Softshell Hispano Aviación |
| 1 x | A/C quality beech plywood 498x247x2.0 mm |
| 2 x | Silicone 0,25 qmm servos wire Graupner (5 m) |
| 1 x | PVC 0,14 qmm servos wire Graupner (100 m) |
| 2 x | Z Bender - S Type Tool |
| 1 x | DPS Switch Ampere |
| 1 x | Shirt Hispano Aviación |
| 1 x | M2,5 5Diam black ball link V2 (2 pcs) |
| 2 x | Balsa panel 10x100x1000 mm |
| 1 x | Round Rod 5,0x1000 mm |
| 1 x | Cabel PVC 2 x 0.25 mm2 (5 m) red-black |
| 1 x | Gold antispark 4 mm plug |
| 2 x | M2 5Diam black ball link V2 (2 pcs) |
| 1 x | Connectors banana oro 6,0 mm Ultralight (M/F) |
| 1 x | ABS angle 2,0x2,0x1000 mm |
| 2 x | CM-3 |
| 3 x | ABS I Strip 20x10x1000 mm |
| 1 x | 4 LiPo XH>EH adapter |
| 1 x | Aluminium cap bolt washer M3 green (8 pcs) |
| 1 x | Universal Filter |
| 3 x | Fresa corte diamante Ø 2.35mm (lentil) |
| 8 x | ABS tube 6.0x5.0x1000 mm |
| 1 x | Strip ABS 2.0x8.0x1000 mm |
| 1 x | ABS angle 6,0x6,0x1000 mm |
| 1 x | OBECHI sheet 2.0x3.0x1000 mm |
| 1 x | Green silicone 0,25 mm² wire (25 m) |
| 1 x | 20 mm carbon horn |
| 1 x | Crystal TX 35.150 Ch 75 |
| 2 x | ABS tube 20.0x18.0x1000 mm |
| 2 x | Set fresas corte Vanadium Ø 2.3/2.35 mm (3 pcs) |
| 2 x | Anodized aluminium M3x0,5x20 mm Sokect Head screw (4 lilac pcs) |
| 1 x | Anodized aluminium M4x0,7x20 mm screw (4 blue pcs) |
| 2 x | PIX Hawk with accesories |
| 1 x | 8Wx2 Navigation & Strobe, 11mm Green/White |
| 2 x | Hexagonal Nut M1 (10 pcs) |
| 2 x | Carbon fiber rod 2.5 mmx1000 mm |
| 2 x | Propeller diller for DLE111 and DA85-150 |
| 3 x | CF tube (L 1000 mm Ø0,7 mm, Ø0,3 mm) |
| 1 x | Horn 16,5x20 mm (2 pcs) |
| 1 x | Aero-Master Wings (Aero-naut) |
| 3 x | Large flex hinge (12 uds) |
| 1 x | Straightened rod Ø 5.0 mm x 1000 mm |
| 1 x | Small Crow DLE-170M |
| 6 x | 1000 ml sealer (DOPE) |
| 2 x | A/C quality beech plywood 600x300x5.0 mm |
| 1 x | 2 mm male connector (2 pcs) with safety connector |
| 1 x | Silent-blocks DLE 170M |
| 1 x | Blue aluminium servo arm V1-Hitec 1,25" inch M3 |
| 1 x | Set fresas corte acero-carburo Ø 1.8/2.3 mm (2 pcs) |
| 1 x | ABS "T" angle 4.0x4.0x1000 mm |
| 1 x | Straightened rod Ø 4.5 mm x 1000 mm |
| 2 x | Set fresas corte acero-carburo Ø 0.5/1.8 mm (2 pcs) |
| 3 x | Aero-Master (Aero-naut) |
| 1 x | Red aluminium servo arm V2-Futaba 2,0 inch |
| 3 x | Balsa panel 2.0x100x1000 mm |
| 1 x | Propeller diller for DLE170 |
| 2 x | Cable set PREMIUM , fuselage/wing one4one |
| 3 x | Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH |
| 2 x | |
| 2 x | M2,5 Diam metal short ball link V3 (2 pcs) |
| 2 x | 18 mm reinforced hinge |
| 6 x | Aluminium tube (L 1000 mm, Ø4.0 mm, Ø3.1 mm) |
| 1 x | GlassBubbles 2.5 g/cm³ Panda, tin (approx. 1 l) |
| 1 x | Mahogany wood slat 2.0x2.0x1000 mm |
| 1 x | Mahogany wood slat 3.0x3.0x1000 mm |
| 1 x | Nylon Screw M4x20 |
| 2 x | Blind nut M2 (10 pcs) |
| 1 x | wing/fuselage connector for 12 pines AWG 20-24 |
| 1 x | Towing hook |
| 1 x | Male connector JST SH 1.0mm with 10 cm wire |
| 2 x | Aluminium wide washer M4 Gold (4 pcs) |
| 2 x | Carbon tube (L 1000 mm, Ø16 mm, Ø14 mm) |
| 1 x | M3/5 Diam metal short ball link V3 (2 pcs) |
| 2 x | Strip ABS 2.0x10.0x1000 mm |
| 1 x | Horn 5/20 with M2 Bearing |
| 1 x | Crystal Universal RX 35.170 Ch 77 |
| 3 x | Carbon tube (L 1000 mm, Ø2 mm, Ø1 mm) |
| 1 x | Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm) |
| 1 x | Carbon tube (L 1000 mm, Ø4 mm, Ø3 mm) |
| 1 x | Joint with bearing M2 22x5,5 |
| 1 x | PVC 0,14 qmm servos wire JR/Graupner (5 m) |
| 2 x | Female connector for 16 pines AWG |
| 1 x | Streamline Stainless Steel Tubing 6.3x3.5x1000 mm |
| 1 x | UBEC 6A KAVAN |
| 2 x | Pine wood slat 10x10x1000 mm |
| 1 x | XH 30 cm Male extension 0,25 mm2 silicone cable for 5 cell |
| 2 x | Propeller diller for EME35 and DLE35 |
| 1 x | Threaded coupler ALU Left M2,5 Ø 4 (2 uds) |
| 3 x | Set cables carga (Mini-JST, JST, XT60, Dean, EC3, TRX, Micro-T, |
| 4 x | Spray EC Red 400ml |
| 1 x | Propeller MEJZLIK 22x10 Electric light (36 g) |
| 2 x | Squared carbon wing joinner 5x5x220 mm |
| 2 x | Pan head screw M2x16 PH |
| 2 x | Silicon black 2,5 qmm cable ( 25 m) |
| 3 x | ABS Strip 1.0x3.0x1000 mm |
| 3 x | Silicone red 6,0 qmm wire ( 1 m) |
| 2 x | Blind nut M6 (4 pcs) |
| 2 x | Battery EMCOTEC LiIon 3000 7.2v |
| 2 x | 30 cm BEC cable (male) |
| 1 x | Camera Sony 4140+673 CCD with Built-in 200mw TX + antenna |
| 1 x | Rudder 2_Tray 4.5~5 inch |
| 1 x | XT-60 Plug Mold |
| 1 x | Black copper lacquer wire Ø0,2 mm (5 m) |
| 2 x | Silicone red 2,5 qmm wire ( 25 m) |
| 3 x | Silicone red 1,5 qmm wire ( 1 m) |
| 2 x | Tube Pitot to PIXHAWK |
| 2 x | Blind nut M4 (4 pcs) |
| 2 x | Pine wood slat 1.5x3.0x1000 mm |
| 1 x | 5 line servos wire black (1 m) |
| 3 x | Partall paste 650 g |
| 2 x | XH 30 cm Male extension 0,25 mm2 silicone cable for 2 cell |
| 2 x | Round Rod 1,5x1000 mm |
| 1 x | M3 black washers (4 pcs) |
| 1 x | Threaded coupler ALU M2,5 Ø 6 (2 uds) |
| 1 x | Silicone red 1,0 qmm wire (100 m) |
| 1 x | quality beech plywood BIRCH 600x300x2.0 mm |
| 2 x | 5 LiPo XH>EH adapter |
| 2 x | Female connector JST SH 1.0mm with 10 cm wire |
| 1 x | Streamline Stainless Steel Tubing 7.5x4.5x1000 mm |
| 3 x | Balsa panel 5.0x100x1000 mm |
| 1 x | Silicone 0,50 qmm servos wire Futaba (100 m) |
| 1 x | 2,3 mm Prop Adapter M5 |
| 1 x | CC 02 |
| 1 x | Banna gold connector 2,5 mm (100 M/F pairs) |
| 2 x | Xplorer4 anemometro |
| 1 x | Blind nut M6 (4 pcs) |
| 2 x | RH long aluminium horn (2pcs) |
| 1 x | Red aluminium servo arm V2-Futaba 17 mm iM2 |
| 7 x | Spray Graphit 33 |
| 1 x | Brass rod Ø 1.5 mm x 1000 mm |
| 1 x | DPSI Ampere battery backer |
| 3 x | Black spiral protective cover for wires Ø 0,5/50 mm - 25 m |
| 2 x | Male/Female prolonguer for Balancer Thunder Power 6S |
| 2 x | Cap Hispano Aviación |
| 4 x | ABS tube 12.0x10.0x1000 mm |
| 2 x | Yellow silicone 0,5 qmm wire (50 m) |
| 3 x | Nylon hinge for flaps/gates 27x10,5 (2 pcs) |
| 1 x | Spannlack 1000 ml |
| 4 x | 67 mm cylidric hinge Ø 5 mm (4 pcs) |
| 2 x | VIPER 1.7 Tailpipe + Fuel Tank 1500ml |
| 3 x | Pin type hinge Al 3,0x50 mm demount (2 pcs) |
| 1 x | Micro flex hinge (12 uds) |
| 3 x | ABS tube 4.0x3.0x1000 mm |
| 4 x | Long pinned hinge (12 uds) |
| 1 x | 15 mm reinforced hinge |
| 1 x | Pin type hinge Al 4,5x70 mm (2 pcs) |
| 1 x | Fast'n EZ-CA-Hinge (12 uds) |
| 1 x | Carbon fiber rod 8.0 mmx1000 mm |
| 1 x | ABS tube 5.0x4.0x1000 mm |
| 1 x | Universal Colour Paste deep black 250 g |
| 4 x | Plasti Dip Liquid Tape 429 ml black |
| 1 x | Long pinned hinge (6 uds) |
| 3 x | Carbon fiber flat 1000x6.0x0.8 mm |
| 5 x | ABS tube 2.0x1.0x1000 mm |
| 3 x | Plasti Dip Liquid Tape 429 ml black |
| 5 x | Pin type hinge Al 6x98 mm (2 pcs) |
| 6 x | Carbon tube (L 1000 mm, Ø22 mm, Ø21 mm) |
| 1 x | Solvent Plasti Dip 1000 ml |
| 2 x | Universal Colour Paste white 50 g |
| 2 x | Carbon tube (L 1000 mm, Ø1.5 mm, Ø0.7 mm) |
| 3 x | Carbon fiber rod 10 mm x 1000 mm |
| 1 x | ABS tube 8.0x7.0x1000 mm |
| 2 x | VIPER 1.7 Electric break wheels + structure |
| 1 x | 48 mm cylidric hinge Ø 2,5 mm (5 pcs) |
| 4 x | Carbon fiber rod 0.5 mmx1000 mm |
| 4 x | Presto SF Light Filler styrene-free (420 g) |
| 1 x | 48 x 10 mm cylidric hinge Ø 3,0 mm (10 pcs) |
| 6 x | PARTALL® Hi-Temp Wax, 340 g |
| 1 x | Pin hinge 26x11 mm (10 uds) |
| 3 x | Carbon fiber flat 1000x3.0x1.0 mm |
| 2 x | Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm) |
| 3 x | Gates hinge black 30x16 mm (2 pcs) |
| 6 x | Carbon tube (L 1000 mm, Ø16 mm, Ø12 mm) |
| 2 x | Carbon fiber rod 3.0 mm x 1000 mm |
| 2 x | Aluminium tube (L 1000 mm, Ø7.0 mm, Ø6.1 mm) |
| 1 x | Carbon fiber rod 5.0 mmx1000 mm |
| 2 x | ABS tube 6.0x4.0x1000 mm |
| 3 x | Cylidric hinge 33 mm Ø 2 mm (5 pcs) |
| 1 x | 33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs) |
| 1 x | Gates hinge aluminium (1 pcs) |
| 1 x | Nylon hinge 15x0,3 (10 pcs) |
| 1 x | Pin type hinge Al 4,5x70 mm demount (2 pcs) |
| 2 x | Carbon fiber rod 12 mm x 1000 mm |
| 1 x | 76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs) |
| 5 x | ABS tube 18.0x16.0x1000 mm |
| 4 x | Nylon hinge 20x20x0,3 (10 pcs) |
| 2 x | Carbon fiber rod 4.0 mmx1000 mm |
| 5 x | Spray adhesive INFUTAC (Clear) 500 ml |
| 4 x | Spray adhesive AEROFIX 2 |
| 4 x | ABS tube 3.0x2.0x1000 mm |
| 1 x | Nylon hinge 20x15x0,3 (10 pcs) |
| 6 x | ABS tube 3.0x1.0x1000 mm |
| 4 x | 20 g tin paste |
| 2 x | Carbon wing joinner 13,4 mm Ø 0,48 mm |
| 1 x | Nylon hinge for flaps 33x9 (2 pcs) |
| 1 x | Fast'n EZ-CA-Hinge, lite (12 uds) |
| 6 x | Carbon fiber rod 0.5 mmx1000 mm |
| 2 x | Nitroverdu 500 ml |
| 1 x | Pin type hinge Al 4,5x70 mm to wire (2 pcs) |
| 3 x | Cylidric hinge 43 mm Ø 2,5 mm (5 pcs) |
| 2 x | Carbon fiber flat 1000x3.0x0.5 mm |
| 4 x | 25 mm reinforced hinge |
| 3 x | Medium pin type hinge (12 uds) |
| 2 x | 43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs) |
| 5 x | ABS tube 7.0x5.0x1000 mm |
| 1 x | Plasti Dip Liquid Tape 429 ml orange |
| 3 x | Indoor hinge with servo arm integraded |
| 1 x | Sub-D Plug Mold |
| 1 x | UHU hart 35 g |
| 1 x | Silicone red 6,0 qmm wire (25 m) |
| 2 x | Hexagonal Nut M4 (10 pcs) |
| 1 x | Silicon red 1,0 qmm cable ( 25 m) |
| 2 x | Nut for mounting M2,5 (4 pcs) |
| 1 x | wing/fuselage connector for 6 pines AWG 20-24 (without pines) |
| 1 x | Servo Fork |
| 3 x | XH/XH 30 cm Female extension 0,25 mm2 silicone cable for 2 cell |
| 1 x | Silicone red 0,5 qmm wire ( 1 m) |
| 1 x | Rotorshape Elevator |
| 1 x | PWC6 PowerWingConnector for 6 servos with fuselage socket |
| 1 x | Spare white 30-36 mm spinner |
| 1 x | Carbon tube 3K-PW (L 2000 mm, Ø40 mm, Ø37 mm) |
| 1 x | Round Rod 4,0x1000 mm |
| 1 x | 1/7 Pilot "Japanese" |
| 2 x | Female connector for 20 pines AWG |
| 1 x | Hard brass tubing (L 1000 mm, Ø5.0 mm, Ø4.1 mm) |
| 1 x | Connectors DEANS (T) |
| 1 x | Carbon tube (L 1000 mm, Ø4 mm, Ø2,5 mm) |
| 1 x | Anodized alum. M4x0,7x20 mm Flat Head screw (4 blue pcs) |
| 1 x | Blue aluminium servo arm V2-Hitec 1,75" inch M3 |
| 1 x | Silicone black 2,5 qmm wire ( 1 m) |
| 1 x | Pin type hinge Al 3,0x50 mm (2 pcs) |
| 3 x | 67 mm cylidric hinge Ø 4,5 mm (5 pcs) |
| 2 x | Flap hinge (6 pcs) |
| 7 x | Carbon fiber rod 20 mmx1000 mm |
| 3 x | Gates hinge |
| 2 x | 67 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs) |
| 4 x | Universal Colour Paste signal white (RAL 9003) 1 Kg |
| 1 x | ABS tube 16.0x14.0x1000 mm |
| 3 x | Gates hinge 30x16 mm (2 pcs) |
| 1 x | MYSTIQUE 2.9 m ARF |
| 1 x | Profile ABS Square 2 x 1000 mm |
| 4 x | XH 30 cm Female extension 0,25 mm2 silicone cable for 4 cell |
| 1 x | ABS Strip 1.0x4.0x1000 mm |
| 2 x | Tool for entel |
| 1 x | Protective Cover for wires Ø 20 mm 1000 mm |
| 1 x | Streamline Stainless Steel Tubing 14.5x9.6x1000 mm |
| 2 x | Lock washer 3.2 mm (20 pcs) |
| 3 x | Silicone red 4,0 qmm wire ( 1 m) |
| 1 x | Round Rod 6,0x1000 mm |
| 3 x | Connectors banna oro 2 mm (M/F) (ultralight) |
| 1 x | Profile ABS triangular 4.0x1000 mm 60º |
| 1 x | Threaded coupler ALU Left M3 Ø 4 (2 uds) |
| 1 x | bavarianDEMON USB cable |
| 3 x | Cover cap drop-shaped paintable 43 mm |
| 1 x | Streamline Stainless Steel Tubing 11.5x6.5x1000 m |
| 1 x | U Profile ABS 1,0x2,0x1000 mm |
| 1 x | Silicone 0,35 qmm servos wire Futaba (100 m) |
| 1 x | Flat washer 3.2 mm (20 pcs) |
| 2 x | 1/6 Pilot "John" |
| 1 x | Aluminium rod Ø 4.0 mm x 3000 mm |
| 1 x | CC 05 |
| 1 x | Rotorshape Autogyro |
| 1 x | Nut for mounting M4 (4 pcs) |
| 3 x | Propeller diller for DLE30/DLE35RA/DLE40/DLE55/DLE61/EME 55/DA-5 |
| 1 x | DPS Switch JR/JR |
| 1 x | EC-Cutter |
| 1 x | Protective Cover for wires Ø 10 mm 1000 mm |
| 1 x | Dust collector for mould cleaning |
| 1 x | Set brocas Ø 0.4-0.6-0.8-1.0 mm (4 pcs) |
| 2 x | Joint with bearing M3 22x5,5 |
| 1 x | Lock nut M6 (10 pcs) |
| 2 x | Lock nut aluminium M3 (4 pcs) |
| 2 x | Aluminium cap bolt washer M4 green (8 pcs) |
| 1 x | Male connector for 10 pines AWG |
| 1 x | ABS "T" angle 2.0x2.0x1000 mm |
| 2 x | Anodized aluminium servo M4x5/8 screw (4 lilac pcs) |
| 1 x | Blue aluminium servo arm V2-Hitec 1,0 inch M3 |
| 1 x | 3 blades set |
| 2 x | Blade holder upper |
| 2 x | Connectors banna oro 3,5 mm (M/F) |
| 1 x | Bags de Luxe ODYSSEY |
| 1 x | Jeti Advance Pro Program Card |
| 2 x | Set Legs + Wheels with brake ASPIRE |
| 3 x | Frontal Adapter for AXI53xx |
| 1 x | CNC FPV Display screen&Transmitter Holder Vertical |
| 1 x | Carbon tube 3K-PW (L 2000 mm, Ø20 mm, Ø18 mm) |
| 2 x | BEC 3A FOXY |
| 1 x | White silicone 0,25 qmm wire (150 m) |
| 3 x | XH 30 cm Male extension 0,25 mm2 silicone cable for 3 cell |
| 1 x | Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm) |
| 1 x | Towing hook |
| 1 x | 1/12 Pilot "Fighter" |
| 1 x | Thixotropic agent TM 100, tin/ 75 g (approx. 1 l) |
| 2 x | Carbon tube 3K-PW (L 1000 mm, Ø12 mm, Ø8 mm) |
| 1 x | Battery RX JETI LiIon RB 5200 7.2v |
| 1 x | Steel tube (L 1000 mm Ø6 mm, Ø5,7 mm) |
| 2 x | Raer wall |
| 2 x | 1000 cc gasoline fuel tank complet |
| 1 x | Aluminium battery holder red |
| 1 x | Transparent spiral protective cover for wires Ø 0,5/50 mm - 25 m |
| 1 x | PVC 0,25 qmm 4 line servos wire JR/Graupner (5 m) |
| 2 x | Battery RX JETI LiIon RB 2600 7.2v |
| 1 x | Cable set PREMIUM, fuselage/wing |
| 2 x | CF tube (L 1000 mm Ø030 mm, Ø26 mm) |
| 2 x | Optotronix Aurora Plug |
| 1 x | Glider Ka 7 Red (2540mm) |
| 1 x | ABS Strip 1.5x8.0x1000 mm |
| 2 x | "L" servo arm 65x49 mm (2 pcs) |
| 2 x | Fabric scissors curved Premium, 16 cm / 6" length |
| 2 x | Sanyo RX Battery Eneloop 4,8 V JR |
| 1 x | HAWKER HUNTER 1:5,8 Desert (1.770mm) |
| 1 x | Ball link M1.6 (6 uds) |
| 2 x | Quicklock washer 2 mm (10 pcs) |
| 1 x | Spinner 4BL 4 blades pleg. prop 40 mm / 4,0 mm |
| 1 x | XH 30 cm Female extension 0,25 mm2 silicone cable for 5 cell |
| 1 x | Round Rod 2,0x1000 mm |
| 1 x | Nut for mounting M2 (4 pcs) |
| 2 x | Avia spare fouselage CF reinforced (Top Model) |
| 2 x | Starter EM Gear Power 250 |
| 2 x | MPX screwable clips (5 pcs) |
| 1 x | White silicone 0,25 mm² wire (25 m) |
| 1 x | SLICK 360-A 104" (2640 mm) |
| 3 x | Z-shaped servo mount |
| 1 x | Boat 82 mm |
| 2 x | ALU servo arm 3 mm shaft |
| 1 x | Threaded coupler ALU M3 Ø 4 (2 uds) |
| 1 x | ALU double servo arm 3 mm shaft |
| 1 x | 18m Fitting barb |
| 1 x | Motor B20-18 L + 4:1 gearbox |
| 1 x | 170x54 mm SLH KOVO wheel with bearing and metal hub |
| 1 x | FESTO connector M7 Quick 4mm 90º |
| 1 x | LiPo Storage Box Type "BIG" |
| 1 x | Black silicone 0,25 mm² wire (25 m) |
| 1 x | XH/XH 30 cm Female extension 0,25 mm2 silicone cable for 6 cell |
| 1 x | LH long black aluminium horn L31xH30 (2pcs) |
| 2 x | ABS Strip 1.5x4.0x1000 mm |
| 1 x | Silicone black 4,0 qmm wire (25 m) |
| 3 x | CC 03 |
| 3 x | Pine wood slat 2.0x2.0x1000 mm |
| 2 x | Screw M2.5x10 (10 pcs) |
| 1 x | SPS 70V 140/280 A |
| 2 x | Sealing Iron Sleeve PROF |
| 1 x | Hard brass tubing (L 1000 mm, Ø4.0 mm, Ø3.1 mm) |
| 1 x | SPARK Switch 5.9v |
| 1 x | Long ball link M3 (6 uds) |
| 1 x | BIG MOSNTER |
| 1 x | Hard brass tubing (L 1000 mm, Ø8.0 mm, Ø7.1 m) |
| 1 x | Wheel keeper washer |
| 2 x | SyRen 10A 6V-24V Regenerative Motor Driver |
| 2 x | Silicone red 2,5 qmm wire ( 1 m) |
| 1 x | ASPIRE Red ARF 2.000 mm, Set Elevators |
| 1 x | Savox HV Brushless Servo SB-2270SG (Swashplate) |
| 1 x | A50 Backmountset complete |
| 1 x | U Profile ABS 8,0x4,0x1000 mm |
| 1 x | Pine wood slat 2.0x10.0x1000 mm |
| 2 x | Propeller drill jig DA 100/85/120/150/200 and VM 60-210 |
| 1 x | Spare white 36-38 mm spinner |
| 1 x | Balsa panel 4.0x100x1000 mm |
| 1 x | LA500 Autogyro |
| 1 x | Motor A20-20 L EVO |
| 1 x | 30 cm BEC cable (female) |
| 1 x | M2/M1/6 3Diam short black ball link V1 (6 pcs) |
| 1 x | Aero-Master Fuselage (Aero-naut) |
| 1 x | PSC 6 |
| 2 x | Strip 1,5x1,5x330 mm |
| 1 x | Tester LiPo/LiIon/LiMn/LiFe |
| 2 x | 2,3 mm Prop Drive Günther M4 |
| 2 x | Flat washer 4.3 mm (20 pcs) |
| 1 x | Charger LiPo Charger4 |
| 1 x | HAWKER HUNTER 1:5,8 (1.770mm) |
| 1 x | Connectors banna oro 8,0 mm (M/F) |
| 1 x | Charger Li Polymer Multi-Cell Multi-Rate Charger (MCMR) |
| 2 x | Sanyo TX Battery Eneloop 9,6 V Hitec |
| 1 x | Red aluminium servo arm V1-Futaba 20 mm M2 |
| 1 x | Copier 2x20 cm pcs |
| 3 x | Reflector 18 mm (2 pcs) |
| 1 x | Lock washer 4.3 mm (20 pcs) |
| 1 x | 6 mm aluminium horn with patella |
| 1 x | PVC 0,08 qmm Futaba servos wire (5 m) |
| 1 x | Multi-adapter balancer JST - TP |
| 1 x | Hexagonal Nut M3 (10 pcs) |
| 1 x | Ka 8 B (Top Model) |
| 1 x | Carbon tube 3K-PW (L 1000 mm, Ø22 mm, Ø20 mm) |
| 2 x | PH5 adapter for 5mm M8 axi for AXI2820 y 2826 |
| 1 x | Streamline Stainless Steel Tubing 17.8x12.4x1000 mm |
| 4 x | Protective Cover for wires Ø 15 mm 1000 mm |
| 1 x | Astra wing Joinner (Top Model) |
| 2 x | 102x26 Ø6.0 mm aluminium core wheel |
| 1 x | Electric spoiler 185 mm (2 pcs) |
| 1 x | Spinner propeller pleg. 40 mm / 5 mm |
| 1 x | Male connector for 12 pines AWG |
| 2 x | Starter Sullivan-STAR 601 |
| 1 x | Straightened rod Ø 2.5 mm x 1000 mm |
| 1 x | LA500 housing-upper cyclic |
| 1 x | Crystal Universal RX 35.070 Ch 67 |
| 2 x | 100g Flux Paste for Silver Solder |
| 1 x | Baering 3x8x4 |
| 2 x | Steel tube (L 1000 mm Ø10 mm, Ø9,7 mm) |
| 1 x | Motor DLE 430 cc - Paramotors |
| 2 x | Extension 5 lipos JST - JST/C |
| 2 x | ABS "T" angle 6.0x6.0x1000 mm |
| 1 x | JR silicone servo wire 0,35 qmm / 5m |
| 2 x | Set brocas Ø 1.5-2.0-2.5-3.0 mm (4 pcs) |
| 2 x | XH/XH 30 cm Female extension 0,25 mm2 silicone cable for 5 cell |
| 1 x | Spinner propeller pleg. 36 mm / 5,0 mm |
| 2 x | Quicklock washer 1.5 mm (10 pcs) |
| 1 x | Carbon/kevlar tube 3K-PW (L 1500 mm, Ø25 mm, Ø22.5 mm) |
| 1 x | Motor A30-12 XL Glider |
| 1 x | APM2.6 Power module with 5.3V DC BEC |
| 2 x | Protective Cover for wires Ø 6 mm 1000 mm |
| 1 x | Circlik for shaft 1.9 mm (10 pcs) |
| 1 x | Superlight wheel 125 mm with valve (2 pcs) |
| 1 x | Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH |
| 1 x | Metal ball clevis M3 (10 uds) |
| 1 x | 90x45 mm hard foam KOVO wheel |
| 1 x | HPP-21 PLUS PC Programmer for Hitec Digital Servos |
| 1 x | 50 mm aluminium spinner (Kavan) |
| 1 x | AXI 2814/16 V2 Long |
| 1 x | Anchor 25 mm (2 uds) |
| 1 x | Propeller electric carbon 9.5x6 |
| 2 x | Aluminium cap bolt washer M4 blue (8 pcs) |
| 2 x | Beech dowels 4.0 x 1000 mm |
| 1 x | ENIGMA ARF |
| 1 x | Sparkplug Saito 400 |
| 1 x | ASPIRE Red ARF 2.000 mm, Canopy |
| 1 x | LA500 pre-rotation gear hub |
| 1 x | Socket Screw M2x3 mm (4 pcs) |
| 1 x | Anchor 80 mm (2 uds) |
| 1 x | Streamline Stainless Steel Tubing 10.5x5.7x1000 m |
| 1 x | 25 mm Sandpaper file |
| 1 x | 50N turbine start protection tube |
| 2 x | Profile ABS half cane 7.0x1000 mm |
| 1 x | 82 mm aluminium spinner. |
| 1 x | Welder 100W/200V |
| 1 x | Servo M2x7/16 screw (4 pcs) |
| 2 x | Vacuum Connection VA 1 (for hose Ø 6 mm) |
| 1 x | Connectors banna oro 8,0 mm 5 pcs(Female) |
| 1 x | PVC 0,14 qmm servos wire Hitec/Mpx (5 m) |
| 2 x | Xplorer1 anemometro |
| 1 x | Combo lighting module with covering drop shape |
| 1 x | Spinner 60 mm Black (Kavan) |
| 1 x | Propeller electric carbon 10x7 |
| 1 x | Spinner propeller pleg. 30 mm / 4,0 mm |
| 1 x | 76x24 mm (3.0") Type jets aluminium core wheel |
| 4 x | VBar NEO |
| 2 x | CF tube (L 1000 mm, Ø1 mm, Ø0,5 mm) |
| 1 x | 250 mm / 16 mm Airbrakes |
| 1 x | FESTO connector M7 barb fitting XL Tygon |
| 1 x | Adjustable launching hook |
| 1 x | LiPo Storage Box Standard 1 Type 1 |
| 1 x | Battery bed V2_S (black) |
| 1 x | Brass hexagonal rod Ø 5 mm x 1000 mm |
| 1 x | Surface Indicator Gauge Small |
| 1 x | Horn 13,5x16 mm (2 pcs) |
| 2 x | 15 mm floating pad (30 pcs) |
| 1 x | Linden wood slat 3.0x3.0x1000 mm |
| 2 x | BALSA triangular 15x15x1000 mm |
| 1 x | Spark plug key NGK MVVS |
| 1 x | Big Crow DLE-170M |
| 1 x | AXI 2826/6 V2 Long |
| 1 x | Carbon tube 3K-PW (L 1000 mm, Ø14 mm, Ø12 mm) |
| 1 x | Support 45% Hopper JetsMunt |
| 1 x | Female prolonguer XH 30 cm 6 cell cable of silicone 0,25 mm |
| 1 x | Motor A40-10 L V2 14-Pole Glider |
| 1 x | MPX Sub-D Adaptor |
| 1 x | Propeller POWER-PROP 7x7 |
| 1 x | Motor wall |
| 1 x | F-16 Scale 1:6 (1.630mm) |
| 1 x | Aluminium servo arm (2 uds) |
| 2 x | QS Bulkhead Valve 6/6 mm |
| 1 x | Adpater for mounting VMKG gearbox in 480 motor |
| 1 x | Red aluminium servo arm V1-Futaba 15 mm iM2 |
| 1 x | Carbon tube (L 1000 mm, Ø8 mm, Ø6 mm) |
| 1 x | Blade Holder Full (4 blades) |
| 2 x | Propeller electric carbon 8.5x7 |
| 1 x | MPX PCB "Gender-Changer (5 pcs) |
| 1 x | Round Rod 1,0x1000 mm |
| 1 x | Red 3m5 mm connector holder |
| 1 x | Servo HITEC HS-5685MH |
| 2 x | Head runner |
| 1 x | AL Axle Shaft 4.0x16 mm (2 uds) |
| 1 x | Pump hose (Ø 6/8 mm) transparent |
| 1 x | ABS angle 10,0x10,0x1000 mm |
| 1 x | Threaded coupler ALU M2,5 Ø 4 (2 uds) |
| 1 x | Propeller POWER-PROP 11x8 |
| 1 x | Carbon tube 3K-PW (L 2000 mm, Ø40 mm, Ø37 mm) |
| 2 x | Fuel Fittings-Red |
| 1 x | Propeller electric carbon 10.5x8 |
| 2 x | Carbon tube 3K (L 1000 mm, Ø 8 mm, Ø 7 mm) |
| 1 x | Propeller electric carbon 6x5 |
| 1 x | Crystal TX 35.100 Ch 70 |
| 1 x | SBEC 40 |
| 2 x | SBEC Jeti |
| 1 x | Fascination 3600 mm (Top Model) |
| 1 x | EVP Unit for AXI2208/xx and 2212/xx |
| 1 x | aluminium servo arm V1-JR 1,0 inch M2 |
| 1 x | FuelTank Cap (red) |
| 1 x | Nut M2 securing |
| 1 x | FESTO connector M7 barb fitting 6mm |
| 1 x | Nut M2 |
| 1 x | Silicone black 1,0 qmm wire ( 25 m) |
| 1 x | Sanyo TX Battery Eneloop 7,2 V MPX |
| 1 x | Nut for mounting M5 (4 pcs) |
| 1 x | Gold aluminium servo arm V2-JR 1,25" inch M3 |
| 1 x | Threaded insert M5 (10 pcs) |
| 1 x | XH/XH 30 cm Female extension 0,25 mm2 silicone cable for 3 cell |
| 1 x | 10 mm portholes (10 pcs) |
| 1 x | Nut for mounting M6 (4 pcs) |
| 1 x | Connector CAN 15 |
| 1 x | Servo HITEC HS-225 BB |
| 1 x | AXI 2820/14 V2 |
| 1 x | Servo M2x9/16 screw (4 pcs) |
| 1 x | Superlight deluxe wheel 45 mm (2 pcs) |
| 1 x | Cable servo PREMIUM 1 m (blanco/rojo/negro) AWG21 + AWG26 TPE |
| 1 x | Motor Mega AC 16/07/12 |
| 1 x | Radial Mount Set for AXI2814 and AXI2820 V2 |
| 1 x | Anodized alum. M3x0,5x20 mm Flat Head screw (4 blue pcs) |
| 1 x | GRAFAS MAXI ARF |
| 1 x | BALSA triangular 10x10x1000 mm |
| 1 x | Motor B50 19 S & 6.7:1 gearbox |
| 1 x | Fresa corte diamante Ø 2.35mm (flame) |
| 1 x | L ELBOW 90º ø 25 mm |
| 1 x | Female connector for 10 pines AWG |
| 1 x | A50 Backmountset complete V3/V4 |
| 1 x | Sanyo RX Battery Eneloop 6,0 V Futaba |
| 1 x | Crystal RX 35.120 Ch 72 |
| 2 x | Heat Seal Iron |
| 1 x | Long Switch On/Off micro |
| 1 x | Crystal TX 35.180 Ch 78 |
| 1 x | Gracia Maxi ARF, bags (Top Model) |
| 1 x | Ion Pro, Fuselage (JP Model) |
| 1 x | 5 mm Prop Adapter M8 |
| 1 x | ODYSSEY Blue FANTASY ARF 2190 mm |
| 1 x | Futaba 30 mm servo rounded arm |
| 1 x | LED wire (green - 2pcs) |
| 1 x | ALU servo arm 90º 3 mm shaft |
| 1 x | Tail wheel for 5-8 kg models |
| 2 x | Albatros ,spare fuselage (Top Model) |
| 1 x | Head upper part |
| 1 x | Spinner propeller pleg. 40 mm / 3,17 mm |
| 1 x | Propeller POWER-PROP 15x10 |
| 1 x | SF260 SIAI MARCHETTI 50E yellow/black (SebArt) |
| 2 x | Steel tube (L 1000 mm Ø7 mm, Ø6,7 mm) |
| 1 x | Heli digital angle measurer |
| 1 x | Propeller electric carbon 8.5x5 |
| 1 x | Cockpit metalic closing |
| 1 x | AXI 2204 Multicopter |
| 1 x | Carbon Non-crimp ST 200 g/m² 50 cm x 20 m |
| 1 x | Silicone black 0,75 qmm wire ( 25 m) |
| 1 x | F9F COUGAR Grey ARF 1.562 mm |
| 2 x | EXCITE S400 Pylon |
| 1 x | ZENOAH ZG 26SLH Helicopter Engine |
| 1 x | Vacuum bag, 1200 mm x 50 m |
| 1 x | Aluminium wide washer M3 gold (4 pcs) |
| 1 x | Window mounting channel 5m |
| 1 x | XH 30 cm Male extension 0,25 mm2 silicone cable for 4 cell |
| 1 x | Motor Mega AC 16/25/02 |
| 1 x | Universal Prop Saver |
| 1 x | Horn 6/20 with M3 Bearing |
| 1 x | Aluminium cap bolt washer M3 red (8 pcs) |
| 1 x | Balsa panel 3.0x100x1000 mm |
| 1 x | Eachine EV800D 5 Inches 800x480 FPV VR Goggles Monitor |
| 1 x | HITEC DPC-11 programmer |
| 1 x | Carbon tube 3k-LW (L 2000 mm, Ø30 mm, Ø28 mm) |
| 1 x | Set fresas corte Vanadium Ø 2.3/2.35 mm (3 pcs) |
| 2 x | Roller cutter 28 mm |
| 1 x | Propeller diller for DA50, DLE55 red |
| 1 x | Piñon motor rotor LA-500 |
| 1 x | Superlight deluxe wheel 50 mm (2 pcs) |
| 1 x | 89x32 mm (3.5") axle Ø5 mm aluminium core wheel |
| 1 x | Engine mounts for .09 - .19 engine |
| 1 x | AXI 2826/12 V2 Long |
| 1 x | Silicone red 0,75 qmm wire ( 25 m) |
| 1 x | Spinner propeller pleg. 45 mm / 6 mm |
| 1 x | Modelling compound (Plastilin), sculptor's quality 1 Kg |
| 2 x | Anodized alum. M4x0,7x20 mm Button Head screw (4 dark blue pcs) |
| 1 x | A30-M/L/XL Backmountset complete |
| 2 x | IKURA 4.0 m |
| 1 x | Propeller POWER-PROP 10x7 |
| 1 x | Fuel Fittings-Blue |
| 1 x | Socket head long ball link M3 (6 uds) |
| 1 x | ABS "T" angle 8.0x8.0x1000 mm |
| 1 x | TX 250 mW especial GOPRO |
| 4 x | Hard brass tubing (L 1000 mm, Ø2.0 mm, Ø1.2 mm) |
| 1 x | KOBY 90 LV Esc |
| 1 x | Ø 40 mm fiberglass motor-holder for electric motors |
| 1 x | 46 mm Futaba servo arm tandem with ball link |
| 2 x | LA500 freewheel bearing |
| 1 x | Servo HITEC HS-645 MG |
| 1 x | Carbon tube 3k-LW (L 2000 mm, Ø30 mm, Ø26 mm) |
| 1 x | Futaba 50/60 mm servo pull-pull double arm with ball link |
| 1 x | Light semi-synthetic Oil PUTOLINE TT (1l) |
| 1 x | Horn 5/15 with M2 Bearing |
| 2 x | Propeller electric carbon 9.5x7 |
| 1 x | Brushless ESC 30A F-450 |
| 1 x | Unmounted aluminium pin 6x98 mm (2 pcs) |
| 1 x | Spinner propeller pleg. 36 mm / 6,0 mm |
| 2 x | Head core bushing |
| 2 x | Anodized aluminium servo M3x16 screw (4 red pcs) |
| 2 x | Silicone red 1,5 qmm wire ( 25 m) |
| 1 x | Boat 140 mm |
| 2 x | Blades 330mm |
| 1 x | Servo HITEC HS-5645 MG Digi |
| 2 x | Crystal Universal RX 35.150 Ch 75 |
| 1 x | U Profile ABS 5,0x10,0x1000 mm |
| 2 x | Blue Aluminium lock nut M3 (4 pcs) |
| 1 x | Propeller POWER-PROP 10x7 Izda |
| 1 x | Gracia (Top Model) |
| 1 x | Cotter MVVS 45/50/58 cc |
| 1 x | Cables suitable for the motor AC 28/7 |
| 1 x | Ring support P-20 OPUS V-Jet 60mm |
| 1 x | Prop Saver for AXI 22xx/xx |
| 1 x | Blade holder metal LAMA |
| 1 x | Pan Head Screw M2x8 PH countersunk head |
| 1 x | Red aluminium servo arm V2-Futaba 1,25" inch M3 |
| 1 x | Grub screw M3x3 shouldered (2 pcs) |
| 1 x | Screw M2x6 (10 pcs) |
| 2 x | EXTRA 300L 1.2 m Blue |
| 1 x | Central support Speed 280 |
| 2 x | TP/TopFuel - XH 2/3S Adapter |
| 2 x | Albatros red/white (Top Model) |
| 1 x | Grafas ARF 3.0 m (Top Model) |
| 1 x | Carbon plate 350x150x3.0 mm |
| 2 x | Steel tube (L 1000 mm Ø4 mm, Ø3,7 mm) |
| 1 x | Servo HS-5565MH High Voltage |
| 1 x | Red aluminium servo arm V3-Futaba 1,5inch M3 |
| 1 x | Propeller POWER-PROP 13x8 |
| 1 x | FESTO connector M7 Quick 6mm 90º |
| 1 x | Steering arm 16 mm Ø 4 mm (2 uds) |
| 1 x | RX Battery Eneloop 4,8 V JR 2500 mAh |
| 1 x | L-Connector 1.5 mm x 1000 mm |
| 1 x | Carbon tube (L 1000 mm, Ø7 mm, Ø5 mm) |
| 1 x | Frontal support Speed 400/480 |
| 1 x | 9x4.7 * 22x12 carbon propeller |
| 1 x | 34 mm Alu spinner 3.17 mm pleg. propeller |
| 1 x | Swift ARF 2000 mm Red (Hacker Model) |
| 2 x | Carbon tube 3K-PW (L 1000 mm, Ø25 mm, Ø22.5 mm) |
| 1 x | LA500 ciclic lever |
| 1 x | DUPLEX 2.4EX MT 125 temperature sensor |
| 1 x | Battery bed V2_M (black) |
| 1 x | 14 mm Portholes for screws (10 pcs) |
| 2 x | Electric Fuel Pump 12V |
| 1 x | Head lower part |
| 3 x | Resistor 3W 5% 2R2 |
| 1 x | Bidule 111 3000 mm Canopy |
| 1 x | Lock nut M2 (10 pcs) |
| 1 x | 64 mm aluminium spinner |
| 1 x | Receiver Crystal 35 Mc/s Ch 62 |
| 2 x | Propeller POWER-PROP 11x6 |
| 1 x | Electric coversion set |
| 1 x | Bearing housing |
| 3 x | PowerPack 2.5X2 PRO |
| 2 x | Cierva C30 Body Spain |
| 1 x | 80 mm rods set for direction control |
| 1 x | Size "M" motor holder for class 400 |
| 1 x | Motor A40-14 L 14-Pole V4 |
| 1 x | Carbon Non-Woven, 240 g/m² 100 cm x 5m |
| 1 x | Motor B40 10L + MAXON 4,4:1 Keramik |
| 1 x | Superlight deluxe wheel 40 mm (2 pcs) |
| 1 x | 120x60 mm SLH KOVO wheel |
| 1 x | AXI 2808/20 V2 |
| 1 x | Pinion for PG4/33 gearbox |
| 1 x | Crystal TX 35.050 Ch 65 |
| 1 x | PPS-4D Propeller |
| 1 x | Fascination 3600 mm, Spare Elevator (Top Model) |
| 1 x | Socket head ball link M3 (2 uds) |
| 1 x | Servo HITEC HS-53 |
| 1 x | Hacker X-Pro USB interface V2 |
| 2 x | Sanyo RX Battery Eneloop 4,0 V AAA JR |
| 1 x | LA500 nose |
| 1 x | Propeller POWER-PROP 11x9 |
| 1 x | Motor DLE 200cc Std |
| 1 x | MythoS 50E Yellow/Black |
| 1 x | LA500 cyclic central part |
| 1 x | Aluminun wheel collar 6 mm Ø (4 uds) |
| 1 x | 2,3 mm Prop Adapter M6 |
| 1 x | Epoxy 40 min (Hardener). 1 Kg |
| 1 x | ABS Strip 1.0x2.0x1000 mm |
| 1 x | Esc MasterSPIN 16 Pro |
| 1 x | Blade Holder (3 blades) |
| 1 x | Servo HITEC D645 MW |
| 1 x | Motor Mega AC 16/07/03 |
| 2 x | Brass hexagonal rod Ø 4 mm x 1000 mm |
| 1 x | Pitts S1 - V2 1500 mm (Phoneix Model) |
| 1 x | Servo HITEC HS-635HB Carbonite |
| 1 x | Straightened threaded rod M3 - 1m |
| 1 x | Wing-connector: Glass / Carbon tube (13.7/12.5) x 1000 mm |
| 1 x | Surprise XII Horizontal Estabilizer (Freudenthaler) |
| 1 x | Balanceradapter JST-XH (Heli 47G) 2-6 c. |
| 1 x | Motor rotor LA-500 |
| 1 x | 3 mm Long Prop Adapter M5 |
| 2 x | Blind nut M3 (4 pcs) |
| 1 x | Gold aluminium double servo arm V3-JR 3.5 inch M3 |
| 1 x | Miss ULTIMATE 50E Yellow/Black |
| 1 x | SBEC 30 D |
| 1 x | Pipa 3D BULL MØ1 2.600mm |
| 1 x | Nut for mounting M3 (4 pcs) |
| 1 x | MythoS 50E White/Blue |
| 1 x | Anodized aluminium servo M4x5/8 screw (4 red pcs) |
| 1 x | Aluminum Fold Prop Spinner 40 mm / 5mm |
| 1 x | Pan Head Screw M1,6x6 (10 pcs) |
| 1 x | Cooler motor type 400 |
| 1 x | TrainerCord (master-learner) |
| 1 x | Magnetic Connect locking system |
| 1 x | Silicone black 6,0 qmm wire ( 1 m) |
| 1 x | SEBART S30 yellow/black (SebART) |
| 1 x | LO 100 ARC 3.3m,cabina |
| 1 x | Batetia LiFe 3200 mAh 6.6v MPX PowerBox |
| 1 x | Motor Mega AC 16/35/01 |
| 1 x | Straightened threaded rod M2-1m |
| 1 x | Ball link M2,5 (10 pcs) |
| 1 x | M2,5 5Diam metal ball link V3 (2 pcs) |
| 1 x | 95 mm aluminium spinner. |
| 1 x | Circlik for shaft 2.3 mm (10 pcs) |
| 1 x | Propeller MENZ-S 18x8 |
| 1 x | Red 4 mm connector holder |
| 1 x | Hexagonal Nut M2 (10 pcs) |
| 1 x | Hard brass tubing (L 1000 mm, Ø11.0 mm, Ø10.0 mm) |
| 1 x | Brass hexagonal rod Ø 3 mm x 1000 mm |
| 1 x | Pan Head Screw M2x8 PH |
| 1 x | Komet Pump |
| 1 x | Crystal Universal RX 35.050 Ch 65 |
| 1 x | Tank + hopper Kevlar ASPIRE 6 L Kero |
| 1 x | Propeller MENZ-S 20x12 |
| 1 x | XH female balance (8S) connector (2 pcs) |
| 2 x | Birch plywood plate 600x300x2.0 mm |
| 1 x | FOXY G2 C3530-700 |
| 2 x | Silicone black 1,5 qmm wire ( 25 m) |
| 1 x | Fuselage Autogyro RAINBOW |
| 1 x | Blue aluminium double servo arm HITEC 2,5 inch M3 |
| 1 x | Universal batery Tester |
| 1 x | Fabric scissors curved (offset handles), 16 cm / 6" length |
| 1 x | AX-60 starters (5 pcs) |
| 1 x | Sanyo Eneloop AAA 1,2 V battery 800 mAh |
| 1 x | Esc MasterBasic 70SB |
| 1 x | JETImodel SINGLE BEC |
| 1 x | Futaba 25 mm servo arm with M3 ball link |
| 1 x | Sanyo RX Battery Eneloop 6,0 V FUT |
| 1 x | resin-hardener package L-385 with hardener H-385 (3.5 Kg) |
| 1 x | 50 mm white plastic spinner for folding propeller |
| 1 x | Ball link M2 (10 pcs) |
| 1 x | Motor A40-10S V4 14-Pole |
| 1 x | Blue aluminium servo arm V2-Hitec 1,25 inch M3 |
| 1 x | Indoor motor holder |
| 1 x | Vertical mounting servo holder |
| 1 x | Nut M1,6 |
| 1 x | 4Wx2 Power Navigation Light, 13mm, T-Fuse White |
| 1 x | LA500 rotor head core |
| 1 x | 12x6 tree blades propeller |
| 2 x | 6 mm Quick clamp_S (10 pcs) |
| 1 x | Propeller MEJZLIK 20x10 Electric light (36 g) |
| 1 x | Battery RX JETI LiIon RB 6200 7.2v |
| 1 x | Sanyo TX Battery Eneloop 9,6 V Futaba |
| 1 x | 19.5x13 Falcon electric 3-Blade carbon prop (54 g) |
| 1 x | Propeller MENZ-S 19x12 |
| 1 x | Stainless steel cable Ø 1.3 mm (10 m) |
| 1 x | Axle for AXI 2217/xx motors |
| 1 x | Digital precision scale up to 2000 g |
| 1 x | BALSA trip 3.0x3.0x1000 mm |
| 1 x | 26x8 BIELA propeller |
| 2 x | Silicone 0,50 qmm servos wire Graupner(100 m) |
| 1 x | Red spinner 40-45 mm |
| 1 x | LA500 housing-lower cyclic |
| 1 x | 3 mm Leader (L 100 mm) |
| 1 x | Modulo telemetria 500 mW/100 mw Radio aire/Tierra Modulo 915 MHz |
| 1 x | Legs + electric brakes for Viper Jet 1700 mm |
| 1 x | Battery RX JETI LiIon RB 3100 7.2v |
| 1 x | MPX-Dean "T" Adapter |
| 1 x | Anodized aluminium servo M4x5/8 screw (4 silver pcs) |
| 1 x | SERVO DES 806 Pignons |
| 1 x | Landing gear axle Ø 5 mm (2 uds) |
| 1 x | Rigid coupling brass Ø 4.0 / 3.2 mm L: 25 mm |
| 1 x | KatanaS 50E Yellow/Black (SebART) |
| 1 x | Propeller MENZ-S 20x10 |
| 1 x | Three-position switched channel, short |
| 1 x | Horn 5/10 with M2 Bearing |
| 1 x | PWC4 wing/fuselage connector for 4 servos |
| 1 x | Retract undercarriage for gliders 3-7 Kg 3.8-4.3 (without wheel) |
| 1 x | Nylon Screw M6x40 |
| 1 x | Male connector for 20 pines AWG |
| 1 x | DUPLEX MRMP Hall EX |
| 1 x | Cyano ULTRA - CURE™ (21g) |
| 1 x | 3-Blade Spinner 70 x 84 mm GFK |
| 1 x | Pitot tube JETI MSpeed DUPLEX |
| 2 x | Head core |
| 1 x | Connectors DEANS 4 pins (1 pair) |
| 1 x | Hitec 30 mm servo rounded arm |
| 1 x | Propeller electric carbon 7x7 |
| 1 x | Round Rod 1.0x3.5 cm |
| 1 x | Foaming agent for epoxy resins 200 g |
| 1 x | AXI 2826/6 V2 |
| 1 x | MythoS 30E White/Blue |
| 1 x | XH female balance (4S) connector (2 pcs) |
| 1 x | Heat-conducting adhesive (2x2ml), WLK DK 4 |
| 1 x | Cockpit plastic closing |
| 1 x | SPARK Switch 12v |
| 1 x | MPX screwable clips (4 pcs) |
| 1 x | Esc MasterBasic 90 Opto |
| 1 x | 120x60 mm C SLH KOVO wheel |
| 1 x | Extension 2/3 lipos JST/C |
| 1 x | VPP system propeller for AXI VPP motors (spare) |
| 1 x | Piston ring for motor 58/116 cc |
| 1 x | A50 Motor Mount Alu complete set |
| 2 x | Horizontal servo holder |
| 1 x | Cabling for Fox MDM1 wings |
| 1 x | DUPLEX 2,4GHz MRPM-AC EX |
| 1 x | 25 mm fenders (10 pcs) |
| 1 x | VBar Control RX-Satellite |
| 1 x | F450/550 Quadcopter, landing gear |
| 1 x | 38 mm aluminium spinner. |
| 1 x | Steel tube (L 1000 mm Ø9 mm, Ø8,7 mm) |
| 1 x | EDGE XL Orange |
| 1 x | Propeller electric carbon 9.5x5 |
| 1 x | Blue aluminium servo arm V1-Hitec 1,5" inch M3 |
| 1 x | Magnetic Interruptor MULTIPLEX |
| 1 x | Steel tube (L 1000 mm Ø12 mm, Ø11,7 mm) |
| 1 x | PowerBox iGyro SRS + GPS Modul |
| 1 x | Hexagonal Nut M4 (20 pcs) |
| 1 x | Linden wood slat 2.0x2.0x1000 mm |
| 1 x | 3 mm Prop Adapter M6 |
| 1 x | Head lower part New |
| 1 x | Birch plywood plate 600x300x4.0 mm |
| 1 x | Spinner propeller pleg. 30 mm / 6,0 mm |
| 1 x | Carbon tube 3K-PW (L 1000 mm, Ø8 mm, Ø6 mm) |
| 1 x | Poerfly |
| 1 x | JETImodel Addcap 820 |
| 1 x | Spinner propeller pleg. 38 mm / 5,0 mm |
| 1 x | 38 mm Alu spinner 5 mm pleg. propeller |
| 1 x | PIT (Aero-Naut) |
| 1 x | MAULE M-7-420 2.8m Red |
| 1 x | PVC transparent battery termo-retract 85 mm (1 m) |
| 2 x | Protective Cover for wires Ø 3 mm 1000 mm |
| 1 x | Propeller MENZ-S 17x8 |
| 1 x | U Profile ABS 2,0x4,0x1000 mm |
| 1 x | Challenger ARF (Top Model) |
| 1 x | Mini-Pix Esc 15 Amp |
| 1 x | 6 mm ball link M3 (10 pcs) |
| 1 x | Esc KOSMIK 160+ HV COOL |
| 1 x | Glass Bubbles (0,12 g) 350 ml |
| 1 x | Resistor 3W 5% OR47 |
| 1 x | Porpeller HUNTER 480 |
| 1 x | Boat vents 10mm (2pcs) |
| 1 x | Wing connector 8pin with pin strip, plug & socket |
| 1 x | Esc MasterBasic 40SB |
| 1 x | Lock nut aluminium M2.5 (4 pcs) |
| 1 x | Cable with accesories |
| 1 x | Spinner 50 mm White (Kavan) |
| 1 x | AXI 2808/16 V2 Long |
| 1 x | Spinner propeller pleg. 36 mm / 6,0 mm |
| 1 x | Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch 5 m |
| 1 x | Axle for AXI 5345/xx motors |
| 1 x | Super GALEB G-4 Red/Blue ARF 1.751 mm |
| 1 x | Hot Glue Stick BLACK |
| 1 x | Conector JR Servo male (10 pcs) |
| 1 x | DUPLEX MUI 50 Sensor |
| 1 x | Propeller MENZ-S 22x12 |
| 1 x | Towing hook <3m |
| 1 x | Silicone red 1,0 qmm wire ( 1 m) |
| 1 x | Savox Highvoltage Brushless Servo SB-2272MG (Tail rotor) |
| 1 x | Jet Afterburner Simulator NF-Jet3 RY |
| 1 x | Tank Kevlar ASPIRE 6 L Kero |
| 1 x | Brass control horn M4 short for wire (4 pcs) |
| 1 x | 280 cc gasoline fuel tank complet |
| 1 x | Profile ABS triangular 2.0x1000 mm 90º |
| 1 x | Anchor 50 mm (2 uds) |
| 1 x | Straightened rod Ø 1.0 mm x 1000 mm |
| 1 x | 1/6 Pilot "Buddy" |
| 1 x | CAM-Carbon Light Prop 8x4.5" (Prop left) |
| 1 x | Ion Pro, Wing joiner (JP Model) |
| 1 x | Aluminum Fold Prop Spinner 38 mm / 5 mm |
| 1 x | 1/10 Pilot "Jimmy" |
| 1 x | Spinner propeller pleg. 40 mm / 2,0 mm |
| 1 x | AXI 2808/16 V2 |
| 1 x | Foam wheel Ø 38 mm (2 pcs) |
| 1 x | 50 mm servo arm with bearing (2 pcs) |
| 1 x | Canister combo DLE 120 cc |
| 1 x | Medium extra-strong control horn with bearing 2,8x24 |
| 1 x | Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m |
| 1 x | Spring lock washer 4.1 mm (20 pcs) |
| 1 x | Servo Tester |
| 1 x | Silicone black 1,0 qmm wire ( 1 m) |
| 1 x | USB Mini Camera endoscope |
| 1 x | Carbon Non-crimp ST 200 g/m² 50 cm x 5 m |
| 1 x | Q-12 2000 mm Electric |
| 1 x | Spare spinner 65 mm 3-Bl |
| 1 x | SWTU2 switch |
| 1 x | Spinner propeller pleg. 42 mm / 6,0 mm |
| 1 x | HERON RR |
| 1 x | Blue aluminium servo arm V3-Hitec 1,5inch M3 |
| 1 x | Hitec 25 mm servo arm with M3 ball link |
| 1 x | Hexagonal Nut M2.5 (10 pcs) |
| 1 x | Propeller drill jig DA-35/50/60/70 |
| 1 x | Epoxy 5 min. 500 g (Resin) |
| 1 x | Spare Part Frame Set for EACHINE RACER 250 |
| 1 x | 22x10 BIELA pusher propeller |
| 1 x | 20 mm tail wheel for 0,5-1 Kg models |
| 1 x | Silicone black 4,0 qmm wire ( 1 m) |
| 1 x | Blue aluminium servo arm V3-Hitec 1,25inch M3 |
| 1 x | 21x14 Falcon electric carbon prop (64 g) |
| 1 x | AXI 2814/10 V2 Long |
| 1 x | Beech dowels 3.0 x 1000 mm |
| 1 x | Propeller APC 12x8 SF |
| 1 x | Bag connector 2 mm |
| 1 x | Vertical cockpit anchor "tipe F3A" (2 pcs) |
| 1 x | AXI 2820/8 V2 Long |
| 1 x | 51 mm aluminium spinner. |
| 1 x | Cyanoacrylate MD GLUE plus 405, for extreme loads 20g |
| 1 x | Servo HITEC D951 TW |
| 1 x | Motor Mega AC 16/25/01E 3.17mm |
| 1 x | ASPIRE Red ARF 2.000 mm, Front Fuselage |
| 1 x | Screws 2,2 x 6,5 mm (20 pcs) |
 |
| 75,585.94EUR |
