Top » Catalog » Car/Trucks » Trucks » 3103-W

4,750.00EUR

Complete kit CAT 966G II WEDICO-construction-models
[3103-W]

Kit wheel loader 966G II without electrics, without hydrauli

The Wedico wheel loader is the tree machine for your mini construction site! The model is almost exclusively made of aluminum and all metal parts are powder coated.
The model corresponds to the complete kit 3103-W, but is delivered without hydraulics and without electrics

Delivery:
Kit wheel loader made of metal powder coated with 12V Bühlermotor, 3-speed gearbox, differentials.
No hydraulic cylinders, pump or control valve. No lights, no controls / sound.

Technical specifications:
Paint epoxy powder coating
Hollow-tire with original profile
Front and rear drive axles made of metal with partially locking differentials.
Reduction 15: 1
WEDICO-Bühler electric motor, nominal voltage 12V

Length / Length 612 mm 24.09 ''
Width / Width 211 mm 8.31 ''
Height / height 250 mm 9.84 ''
Track width / track (tread) 158 mm 6.22 ''
Weight / Weight 6.2 kg 13.7 lb

under request

Reviews

Quick Find

Shopping Cart

1 x	ABS "T" angle 8.0x8.0x1000 mm
1 x	Streamline Stainless Steel Tubing 17.8x12.4x1000 mm
1 x	Flat Connector 4.0 mm x 1000 mm
1 x	ABS angle 5,0x5,0x1000 mm
1 x	Cross Connector 4.0 mm x 1000 mm
1 x	Streamline Stainless Steel Tubing 6.3x3.5x1000 mm
1 x	ABS angle 2,0x2,0x1000 mm
1 x	Streamline Stainless Steel Tubing 15.5x8.5x1000 mm
1 x	U Profile ABS 1,0x2,0x1000 mm
1 x	Profile ABS half cane 2.5x1000 mm
1 x	Streamline Stainless Steel Tubing 7.5x4.5x1000 mm
1 x	Streamline Stainless Steel Tubing 12.3x7.7x1000 mm
1 x	U Profile ABS 3,0x6,0x1000 mm
1 x	U Profile ABS 8,0x4,0x1000 mm
1 x	L-Connector 4.0 mm x 1000 mm
1 x	L-Connector 1.0 mm x 1000 mm
1 x	Profile ABS half cane 2.0x1000 mm
1 x	Profile ABS Square 1 x 1000 mm
1 x	Streamline Stainless Steel Tubing 14.5x9.6x1000 mm
1 x	U Profile ABS 5,0x10,0x1000 mm
1 x	T-Connector 4.0 mm x 1000 mm
1 x	Profile ABS Square 3 x 1000 mm
1 x	ABS angle 1.5x1.5x1000 mm
1 x	ABS angle 3,0x3,0x1000 mm
1 x	Streamline Stainless Steel Tubing 9.0x5.0x1000 mm
1 x	ABS angle 4,0x4,0x1000 mm
1 x	L-Connector 1.5 mm x 1000 mm
1 x	Optical RPM Sensor
1 x	MAX pilot ARTF
2 x	Parachute P4
1 x	Wing-connector: Glass / Carbon tube (26.5/25 x 25/23) x 1000 mm
1 x	Aramid 50 daN 50 m
1 x	Trike XL motor set (motor+esc+prop)
2 x	Windsock Ozone L - 700 mm
1 x	Hard aluminium thin-walled tube with fibreglass case ø30x1mm, 1m
2 x	Paramotor Kit Camo H1.5/ Ben Red
2 x	Windsock Ozone L -1200 mm
2 x	USB HLS prog. interface
1 x	Black copper lacquer wire Ø0,2 mm (5 m)
1 x	Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH
2 x	Bec MR UBEC 5A (5v/6v/7v)
2 x	MPX-Dean "T" Adapter
2 x	BEC 3A FOXY
1 x	Red copper lacquer wire Ø0,2 mm (5 m)
1 x	Copper lacquer wire Ø0,2 mm (5 m)
2 x	CM-3
1 x	TrainerCord (master-learner)
2 x	Cabel charger transmitter GRAUPNER
1 x	Oratex Natural White 2m
1 x	Oratex Antik 2m
1 x	Oratex Yellow Cub 10 m
1 x	Oracover Brown 2 m
1 x	Monokote PLATINO metalizado (1.8x0.65m)
1 x	Oracover Black 2 m
1 x	Oracover Yellow CUB 2 m
1 x	Oratex Red Fokker 10 m
1 x	Ply-Span 450x600/13g Blue
1 x	Oratex Silver 2m
1 x	Oratex White 2m
1 x	Oracover GREY Seafire Sea 2m
1 x	Papel japones 12 grs/m2 760x510 mm JAPICO
1 x	Oracover Green10 m
1 x	Carbon Non-Woven, 160 g/m² 100 cm 10 m
1 x	SIMtransmitter 6 Mode 2
1 x	Connectors banna gold 5,5 mm (M/F)
1 x	Connectors banna oro 3,5 mm (M/F)
1 x	Socket head long ball link M3 (2 uds)
1 x	Jeti Black cap
1 x	Aluminium wide washer M4 Gold (4 pcs)
1 x	Strip ABS 2.0x10.0x1000 mm
1 x	BALSA trip 2.0x2.0x1000 mm
1 x	Pilot "Dick" Legends Series (Slimline)
1 x	Xplorer3 anemometro
1 x	ABS angle 10,0x10,0x1000 mm
1 x	Set cintas unión paracaídas 145 cm
1 x	Magnetic Interruptor MULTIPLEX
1 x	CC 02
1 x	APM2.6 Power module with 5.3V DC BEC
1 x	JETImodel SINGLE BEC
1 x	Cabling for Fox MDM1 wings
1 x	Electronic switch JETI SP6 0-15v/6A
2 x	"Y" charging 4mm wire (2 IN-1 OUT).
1 x	5 LiPo XH>EH adapter
1 x	Long Switch On/Off micro
1 x	SPS 70V 140/280 A
1 x	SPS 70V 100/200 A
1 x	Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm)
1 x	Paramotor BackPack XXS 2
1 x	30 cm BEC cable (male)
1 x	CC 01
1 x	MPS Gas-Cap-Powerswitch
1 x	30 cm BEC cable (female)
1 x	2 LiPo XH>EH adapter
1 x	3 copper lacquer wire Ø0,2 mm (1 m)
1 x	SWTU2 switch
1 x	Male/Female prolonguer for Balancer Thunder Power 6S
1 x	Circlick securite
1 x	Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH
1 x	Interruptor SPS 70v 60/120A
1 x	Parachute BACKUP X100
1 x	DPSI magnetic switch actuator (housing)
1 x	Futaba External voltage input cable Futaba CA-RVIN-700
1 x	Extension 5 lipos JST/C
1 x	PVC yellow-orange transparent battery termo-retract 57 mm (1 m)
1 x	ABS 500 x 400 x 0,5 mm (white)
2 x	Carbon roving DowAksa / 24k / 1600 tex
1 x	Aluminium sheet 500x250x0,5mm
1 x	Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 15 m
1 x	Sheet Depron Aero 1250x800x3 mm
1 x	165 mm PVC transparent battery termo-retract 165 mm (1 m)
1 x	4,8x1000 mm 2:1 black termoretract tube
1 x	PVC transparent battery termo-retract 195 mm (1 m)
1 x	4,8x1000 mm 2:1 blue termoretract tube
1 x	PVC transparent black termo-retract battery 185 mm (1 m)
1 x	Chopped glass fibre strands 3 mm
1 x	Glass fabric tape 225 g/m² (Silane, plain) 40 mm
1 x	Cable coupler M3 (10 uds)
1 x	Aluminium red ball links M3 V1 (10 pcs)
1 x	Ball link Aluminio M4 x 4 x 6 x 26mm (4 uds)
1 x	SIG Coverall 1.2x1.8 m
1 x	6,4x1000 mm 2:1 green termoretract tube
1 x	PVC termo-retract battery 45 mm black transparent (1 m)
1 x	2,4x1000 mm 2:1 black termoretract tube
1 x	3,2x1000 mm 2:1 red termoretract tube
1 x	3,2x1000 mm 2:1 black termoretract tube
1 x	1,2x1000 mm 2:1 black termoretract tube
1 x	Ply-Span 450x600/13g Orange
1 x	6,4x1000 mm 2:1 red termoretract tube

6,067.27EUR