Top » Catalog » Hardware » Adhesives/Resin/Epoxy » Cianocrylate » Cyanocrylate R&G » R1501022

4.47EUR

CA Glue (medium) 20g
[R1501022]

CA Glue (medium) is a medium viscosity cyanoacrylate adhesive, suitable for bonding applications that require a larger gap fill.
Its medium cure speed and medium viscosity makes CA Glue (medium) suitable for a lot of industrial applications.
Single-component
Transparent
Solvent-free
Special bottle*
*A metal needle is fitted in the lid, which is pressed into the opening of the bottle's dosing attachment when it is screwed on. This reliably prevents leakage, drying out and sticking of the opening. The dosing attachment allows a fine dosing of the adhesive.

temporarily out of stock

Reviews

Customers who bought this product also purchased

Propeller MENZ-S 23x8 temporarily out of stock	Sparkplug NGK CM6 temporarily out of stock	TYGON tubo 1 m Diam. 3.4 x 2.0 mm temporarily out of stock
Tygon tube 6.35 - 3.18 mm 1m temporarily out of stock	XT-60 connector (male) temporarily out of stock	Extender tip (6 pcs) temporarily out of stock

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->

  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
    Cianocrylate->
      BSI Cianocrilates
      Cyanocrylate R&G
      KAVAN Ciano
      Yuki Model
    Epoxy->
    Resin/Gelcoat
    Glass Bubbles
    Contact adhesive
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

ProgBox PRO LCD Hobbywing
44.90EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

1 x	LiPo Storage Box Type "P"
1 x	Battery bed V2_S (black)
1 x	Battery Protection Circuit Board 22.2v 6s
1 x	Aluminium battery holder red
1 x	Battery bed V2_M (black)
1 x	LiPo Storage Box Standard 1 Type 1
1 x	Quicklock washer 2.5 mm (10 pcs)
1 x	Spring lock washer 2.1 mm (20 pcs)
1 x	Quicklock washer 4 mm (10 pcs)
1 x	Aluminium wide washer M4 Black (4 pcs)
1 x	Aluminium cap bolt washer M4 blue (8 pcs)
1 x	Quicklock washer 1 mm (10 pcs)
1 x	Aluminium wide washer M3 red (4 pcs)
1 x	Lock washer 2.7 mm (20 pcs)
1 x	Aluminium cap bolt washer M4 green (8 pcs)
1 x	Flat washer 1.7 mm (20 pcs)
1 x	M3 black washers (4 pcs)
1 x	Quicklock washer 3 mm (10 pcs)
1 x	Spring lock washer 4.1 mm (20 pcs)
1 x	Aluminium cap bolt washer M3 black (8 pcs)
1 x	Flat washer 2.2 mm (20 pcs)
1 x	Aluminium wide washer M3 gold (4 pcs)
1 x	Circlik for shaft 2.3 mm (10 pcs)
1 x	Circlik for shaft 1.5 mm (10 pcs)
2 x	Aluminium cap bolt washer M4 red (8 pcs)
1 x	Spring lock washer 2.6 mm (20 pcs)
1 x	Quicklock washer 3.5 mm (10 pcs)
1 x	Cabel "Y" 30 cm (Futaba)
1 x	Cabel "Y" 30 cm (graupner)
1 x	Cable S.BUS 3 salidas 100 mm
1 x	Extension 15 cm (Futaba)
2 x	Cable silicona macho batt. receptor 30 cm (Futaba)
1 x	Extension 7.5 cm
1 x	Extension silicon 35 cm male (Futaba)
1 x	Extension silicon 30 cm female (Graupner)
1 x	Locking cable tie 3.2x142 (uds)
1 x	Copper lacquer wire Ø0,2 mm (5 m)
1 x	APM2.6 Power module with 5.3V DC BEC
1 x	CC 05
1 x	CC 01
1 x	Circlick securite
1 x	Stainless steel cable Ø 0.52 mm - 15 kp (10 m)
1 x	2 LiPo XH>EH adapter
1 x	Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH
1 x	Crimping sleeves for cable 0.70 mm (10 pcs)
1 x	Stainless steel cable Ø 0.5 mm (10 m)
1 x	Bec MR UBEC 5A (5v/6v/7v)
1 x	4 LiPo XH>EH adapter
1 x	CC 02
1 x	Stainless steel cable Ø 1.3 mm (10 m)
1 x	Stainless steel cable Ø 0.5 mm (2 m)
1 x	Steering arm 16 mm Ø 3 mm
2 x	Canopy Latch
1 x	CellPRO 4S Adaptader (GP/KO up to 4S)
1 x	BEC 3A FOXY
1 x	3 copper lacquer wire Ø0,2 mm (1 m)
1 x	Screw-lock connector M2 (2 uds)
1 x	Gates hinge
1 x	Pin type hinge Al 4,5x70 mm to wire (2 pcs)
1 x	Small pinned hinge (12 uds)
1 x	Cylidric hinge 33 mm Ø 2 mm (5 pcs)
1 x	SIMtransmitter 6 Mode 2
1 x	48 mm cylidric hinge Ø 2,5 mm (5 pcs)
1 x	EasyFLY Addon
1 x	RF9 Flight Simulator with Spektrum Controller
1 x	Nylon hinge 15x0,3 (10 pcs)
1 x	Canopy hinges for Discus 2c, Discus 2a, Ventus 2cx (2pcs)
2 x	Nylon hinge 20x15x0,3 (10 pcs)
1 x	Large flex hinge (12 uds)
1 x	Gates hinge black 30x16 mm (2 pcs)
2 x	Pin type hinge Al 6x98 mm (2 pcs)
1 x	67 mm cylidric hinge Ø 4,5 mm (5 pcs)
1 x	Miniature brass strap hinge, 1 m
1 x	Interface Realflight Simulator
1 x	Pin type hinge Al 3,0x50 mm (2 pcs)
1 x	76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
1 x	Micro flex hinge (12 uds)
1 x	43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs)
1 x	67 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
1 x	Nylon hinge for flaps 33x9 (2 pcs)
1 x	Nylon hinge for flaps/gates 27x10,5 (2 pcs)
2 x	48 x 10 mm cylidric hinge Ø 3,0 mm (10 pcs)
1 x	RX Battery Eneloop 6,0 V JR 2500 mAh
1 x	Kwik link AL M3 con Clip (2 pcs)
1 x	Threaded coupler M2 (10 uds)
1 x	ABS tube 7.0x5.0x1000 mm
1 x	Streamline Stainless Steel Tubing 11.5x6.5x1000 m
1 x	DUBRO - BOLTON PRESSURE FITTING 6-32 (1 PC)
1 x	76 mm light wheels (2 pcs)
1 x	Hexagonal Nut M3 (10 pcs)
1 x	73x24 mm hard foam KOVO wheel with bearing (2 pcs)
1 x	64x20 mm (2.5") Type jets aluminium core wheel
1 x	Lock nut M3 (10 pcs)
1 x	101x28 mm (4.0") Type jets aluminium core wheel
1 x	Absorver mount set for 5-10 Kg models
1 x	100 Newtons FEMA absorber
1 x	Quicklock washer 1.5 mm (10 pcs)
1 x	Blind nut M4 (4 pcs)
1 x	Aluminun wheel collar 3.5 mm Ø (4 uds)
1 x	Katana Mini carbon wheel pants (2 pcs)
1 x	Aluminium wide washer M4 Red (4 pcs)
1 x	18 mm reinforced hinge
1 x	200 mm extensión servo HITEC/JR
1 x	Extension silicon 75 cm (Graupner)
1 x	Futaba male 40 cm extension
1 x	Circlik for shaft 1.9 mm (10 pcs)
1 x	Extension S-Bus 1-2 silicon 30 cm FUTABA
1 x	Lock washer 4.3 mm (20 pcs)
1 x	Extension silicon 50 cm (Futaba)
1 x	Extension silicon 35 cm (Futaba)
1 x	Prolongador S-Bus JR/JR 20cm
1 x	Lock washer 2.2 mm (20 pcs)
1 x	Blue "FUEL VENT" round aluminum overflow socket
1 x	Cierre cabina aluminio Ø4, I=10 mm
1 x	JEEMO Kit ARF Basic (2 color) - XTRALIGHT
1 x	EXTREME FLIGHT BLUE MAGNETIC ROUND FILLER PLUG
1 x	11 mm Rubber pads (14 pcs)
1 x	double Fuel Dot V2 (silver)
1 x	Wings Bags JEEMO
1 x	Suction funnel for carburetor WALBRO 20-80cc (red)

3,115.59EUR