Top » Catalog » Hardware » Adhesives/Resin/Epoxy » Cianocrylate » Cyanocrylate R&G » R1501022

4.47EUR

CA Glue (medium) 20g
[R1501022]

CA Glue (medium) is a medium viscosity cyanoacrylate adhesive, suitable for bonding applications that require a larger gap fill.
Its medium cure speed and medium viscosity makes CA Glue (medium) suitable for a lot of industrial applications.
Single-component
Transparent
Solvent-free
Special bottle*
*A metal needle is fitted in the lid, which is pressed into the opening of the bottle's dosing attachment when it is screwed on. This reliably prevents leakage, drying out and sticking of the opening. The dosing attachment allows a fine dosing of the adhesive.

temporarily out of stock

Reviews

Customers who bought this product also purchased

Propeller MENZ-S 23x8 temporarily out of stock	Sparkplug NGK CM6 temporarily out of stock	TYGON tubo 1 m Diam. 3.4 x 2.0 mm temporarily out of stock
Tygon tube 6.35 - 3.18 mm 1m temporarily out of stock	XT-60 connector (male) temporarily out of stock	Extender tip (6 pcs) temporarily out of stock

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->

  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
    Cianocrylate->
      BSI Cianocrilates
      Cyanocrylate R&G
      KAVAN Ciano
      Yuki Model
    Epoxy->
    Resin/Gelcoat
    Glass Bubbles
    Contact adhesive
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

Batería LiPo GENS 5000 mAh 5S 18.5V 60C (Gens Ace)
105.00EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

2 x	Xplorer3 anemometro
1 x	Xplorer4 anemometro
1 x	Xplorer2 anemometro
1 x	Locking cable tie 2.5x100 (uds)
1 x	Stainless steel cable Ø 0.5 mm (20 m)
1 x	Aluminium alloy coupler for carbon tube 6/M4
1 x	Cockpit plastic closing
1 x	L cockpit anchor "tipe F3A" (2 pcs)
1 x	Steering arm 16 mm Ø 3 mm (2 uds)
1 x	Canopy Lock V1 M3 Blue (2 pcs)
2 x	Locking cable tie 3.2x142 (uds)
1 x	Stainless steel cable Ø 0.52 mm - 15 kp (10 m)
1 x	Screw-lock connector Ø 2 mm (2 uds)
2 x	Stainless steel cable Ø 0.5 mm (10 m)
1 x	Stickers-digit for marking
1 x	Crimping sleeves for cable 0.85 mm (10 pcs)
1 x	Horizontal cockpit anchor "tipe F3A" (2 pcs)
2 x	Electric spoiler 250 mm (2 pcs)
1 x	Stainless steel cable Ø 0.62 mm (10 m)
1 x	Canopy Lock V1 M3 Red (2 pcs)
1 x	Stainless steel cable Ø 0.88 mm - 60 kp (10 m)
1 x	Steering arm 16 mm Ø 3 mm
1 x	Crimping sleeves for cable 1.3 mm (10 pcs)
1 x	Micro screw-lock pushrod conn snap Ø 1 mm (2 uds)
1 x	Covered closure or fairings
1 x	Stainless steel cable Ø 1.3 mm (10 m)
1 x	One touch canopy lock
1 x	Cap closure 33/23.5mm (2 uds)
1 x	Vertical cockpit anchor "tipe F3A" (2 pcs)
1 x	Hovercraft sailcloth
1 x	Carbon fiber rod 0.8 mmx1000 mm
1 x	Carbon fiber flat 1000x3.0x0.13 mm
1 x	Carbon fiber rod 16 mm x 1000 mm
1 x	Carbon fiber rod 1.5 mm x 1000 mm
1 x	Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH
2 x	Cabel charger transmitter GRAUPNER
1 x	Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm)
2 x	30 cm BEC cable (male)
3 x	3 copper lacquer wire Ø0,2 mm (1 m)
2 x	CM-3
1 x	Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH
1 x	CC 05
1 x	BEC 3A FOXY
1 x	Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm)
1 x	Adapter lead MPX/EC3
2 x	30 cm BEC cable (female)
3 x	4 LiPo XH>EH adapter
1 x	6 mm ball link M3 (10 pcs)
1 x	Brass control horn M4 short for wire (10pcs)
1 x	Field folding model stand SebArt
1 x	Xplorer1 anemometro
1 x	LiIon Battery 3000 mAh 3.3v 15A (2 pcs)
1 x	Aluminun wheel collar 5 mm Ø (4 uds)
1 x	Pushrod greyline 3/2 with coupler M2 L: 1000 mm
1 x	Pushrod octagone 3/2 with coupler M2
1 x	Pushrod octagone 4/3 with coupler M3
1 x	Wheel collar 6 mm Ø (4 uds)
1 x	Wheel collar 3.5 mm Ø (4 uds)
1 x	Tapa estado carga XT-60 (6 pcs)
1 x	IKURA GPS 4.28 m
1 x	LS-8 GFK 6m Glider
1 x	Astra wing Joinner (Top Model)
1 x	ASH 31 Mi Scale:1/3 - 7m, elevator
1 x	FOX 3000 mm ARF (FMS)
1 x	Fournier RF-4D
1 x	Fascination 3600 mm, Spare Wings (Top Model)
1 x	Fox MDM 1 4000 mm DeLuxe,Fox 1:4 set of instruments for the f
1 x	Fox MDM 1 4000 mm DeLuxe
1 x	DELPHIN Race 3.6m c64
1 x	Avia spare blue cockpit (Top Model)
1 x	EASYGLIDER 4 RR
1 x	ASH 31 Mi Scale:1/3 - 7m
1 x	Fox MDM 1 4000 mm Std.
1 x	ALBATROS 3.0 m (orange/white)
1 x	Ion Pro NG electric with flaps GREEN Fluor (JP Model)
1 x	Steering arm 12 mm Ø 4 mm
1 x	DG-303 ACRO 3750 mm, canopy
1 x	FOX MDM-1 3.500 mm ARF White
1 x	BLANIK 50 V2 Silver/Orange (SebArt)
1 x	Red copper lacquer wire Ø0,2 mm (5 m)
1 x	JEEMO Kit ARF Basic (2 color Carbon finish) XTRALIGHT
1 x	XICOY X45 rail
1 x	JETImodel SINGLE BEC
1 x	SPS 70V 140/280 A
1 x	SPS 70V 100/200 A
1 x	Connector Sub-D 2+5 Female
1 x	Prolonguer for Balancer Thunder Power 6S
1 x	wing/fuselage connector for 12 pines AWG 20-24
1 x	Opto Gas Engine Kill Switch
2 x	Circlick securite
1 x	Multi-adapter balancer JST - TP
1 x	Servo slow down unit (0,7-14,7 sec )
1 x	Short Switch On/Off micro
1 x	Set fresas corte acero-carburo Ø 0.5/1.8 mm (2 pcs)
1 x	Pump hose (Ø 6/8 mm) transparent
1 x	Steel brush wheel with 2.35mm
1 x	Carbon tube 3K-Matt (L 1000 mm, Ø25 mm, Ø23 mm)
1 x	Spare round blades, 28 mm, pack/ 2 pcs.
1 x	Set brocas Ø 1.2-1.4-1.6-1.8 mm (4 pcs)
1 x	Pin hinge 39x20 mm (10 uds)
1 x	Fast'n EZ-CA-Hinge (12 uds)
1 x	Gates hinge aluminium (1 pcs)
1 x	Pin type hinge Al 3,0x50 mm demount (2 pcs)
1 x	Pin type hinge Al 3,0x50 mm (2 pcs)
1 x	67 mm cylidric hinge Ø 5 mm (4 pcs)
1 x	Fast'n EZ-CA-Hinge, lite (12 uds)
1 x	Long pinned hinge (12 uds)
1 x	18 mm reinforced hinge
1 x	15 mm reinforced hinge
1 x	12.7 mm 2:1 black termoretract tube
1 x	TP/TopFuel - JST-EH 4/5S Adapter
1 x	PSC 5
1 x	TrainerCord (master-learner)
1 x	CC 01
1 x	UBEC 6A KAVAN
1 x	Cable set PREMIUM, SUB-Done 4three fuselage/wing 160 cm
1 x	"Y" charging 4mm wire (2 IN-1 OUT).
1 x	USB Interface REVOLECTRIX for CellPRO 10s
1 x	Copper lacquer wire Ø0,2 mm (5 m)
1 x	Bec MR UBEC 5A (5v/6v/7v)
1 x	5 LiPo XH>EH adapter
1 x	PWC4 wing/fuselage connector for 4 servos
1 x	Switc electronic 30 Amp
1 x	APM2.6 Power module with 5.3V DC BEC

22,191.25EUR