Top » Catalog » Hardware » Adhesives/Resin/Epoxy » Cianocrylate » Cyanocrylate R&G » R1501022

4.47EUR

CA Glue (medium) 20g
[R1501022]

CA Glue (medium) is a medium viscosity cyanoacrylate adhesive, suitable for bonding applications that require a larger gap fill.
Its medium cure speed and medium viscosity makes CA Glue (medium) suitable for a lot of industrial applications.
Single-component
Transparent
Solvent-free
Special bottle*
*A metal needle is fitted in the lid, which is pressed into the opening of the bottle's dosing attachment when it is screwed on. This reliably prevents leakage, drying out and sticking of the opening. The dosing attachment allows a fine dosing of the adhesive.

temporarily out of stock

Reviews

Customers who bought this product also purchased

Tygon tube 6.35 - 3.18 mm 1m temporarily out of stock	Propeller MENZ-S 23x8 temporarily out of stock	Sparkplug NGK CM6 temporarily out of stock
TYGON tubo 1 m Diam. 3.4 x 2.0 mm temporarily out of stock	XT-60 connector (female) temporarily out of stock	XT-60 connector (male) temporarily out of stock

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->

  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
    Cianocrylate->
      BSI Cianocrilates
      Cyanocrylate R&G
      KAVAN Ciano
      Yuki Model
    Epoxy->
    Resin/Gelcoat
    Glass Bubbles
    Contact adhesive
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

Electric Landing Gear ULTIMATUM 3.0 (Elektron Re
1,160.39EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

1 x	Black copper lacquer wire Ø0,2 mm (5 m)
2 x	Copper lacquer wire Ø0,2 mm (5 m)
1 x	Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm)
1 x	Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm)
1 x	CC 03
2 x	5 LiPo XH>EH adapter
1 x	CC 05
1 x	Connector Sub-D 2+5 Female
1 x	Balanceradapter JST-XH (Heli 47G) 2-6 c.
1 x	Cabel charger transmitter GRAUPNER
1 x	Double conector with JR adapter and 200 mm extension
1 x	Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH
1 x	Cabling for Fox MDM1 wings
1 x	30 cm BEC cable (male)
1 x	Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm)
1 x	UBEC 6A KAVAN
1 x	CC 02
1 x	CC 01
1 x	4 LiPo XH>EH adapter
1 x	3 copper lacquer wire Ø0,2 mm (1 m)
1 x	Connector CAN 15
1 x	APM2.6 Power module with 5.3V DC BEC
1 x	30 cm BEC cable (female)
1 x	Dean "T" - Futaba Adapter
1 x	Oracover Green10 m
1 x	Monokote BLUE metalizado (1.8x0.65m)
2 x	Ply-Span 450x600/13g Black
1 x	Oracover White 10 m
1 x	Oracover Black 2 m
1 x	ORACOVER Fluor red (2 m)
1 x	Oracover White 2 m
1 x	Oracover Azul 2 m
1 x	Oratex Natural White 20m
1 x	Oracover Yellow CUB 10 m
1 x	Ply-Span 450x600/13g Yellow
1 x	Oracover Brown 2 m
1 x	Oracover CARBON Metalic 1 m
2 x	MPS Gas-Cap-Powerswitch
3 x	Extension 5 lipos JST - JST/C
1 x	Interruptor RX/Batterie
1 x	Interruptor SAFET-SWITCH 12HV Twinbatt
1 x	Extension 2/3 lipos JST/C
2 x	Male Prolonger TP 4/5S
1 x	Opto Gas Engine Kill Switch
1 x	SBEC 30 D
2 x	Magnetic Interruptor MULTIPLEX
1 x	MAX BEC 2D plus EX
1 x	Electronic switch JETI SP06 Opto
2 x	Multi-adapter balancer JST/C - TP
1 x	Extension 2/3 lipos JST - JST/C
1 x	SPS 70V 100/200 A
1 x	Prolonguer for Balancer Thunder Power 6S
2 x	MAX BEC 2
1 x	SBEC Jeti
1 x	Switc electronic 30 Amp
1 x	DPSI magnetic switch actuator (housing)
1 x	Male prolonguer XH 30 cm 6 cell cable of silicone 0,25 mm
1 x	SPS 70V 140/280 A
1 x	Flat washer 2.7 mm (20 uds)pcs)
1 x	Circlik for shaft 1.5 mm (10 pcs)
1 x	Lock washer 4.3 mm (20 pcs)
1 x	Spring lock washer 3.1 mm (20 pcs)
1 x	Aluminium cap bolt washer M4 red (8 pcs)
1 x	Aluminium cap bolt washer M4 green (8 pcs)
1 x	Quicklock washer 2 mm (10 pcs)
1 x	Aluminium wide washer M4 Red (4 pcs)
1 x	Quicklock washer 1 mm (10 pcs)
1 x	Aluminium wide washer M3 blue (4 pcs)
1 x	Circlik for shaft 1.9 mm (10 pcs)
1 x	Flat washer 4.3 mm (20 pcs)
1 x	Flat washer 1.7 mm (20 pcs)
1 x	Aluminium cap bolt washer M3 blue (8 pcs)
1 x	Spring lock washer 2.1 mm (20 pcs)
1 x	Aluminium cap bolt washer M4 blue (8 pcs)
1 x	M3-M4 rubber washer (8 pcs)
1 x	Circlik for shaft 2.3 mm (10 pcs)
1 x	M3 black washers (4 pcs)
1 x	Quicklock washer 4 mm (10 pcs)
1 x	Aluminium wide washer M4 Blue (4 pcs)
1 x	Aluminium wide washer M3 gold (4 pcs)
1 x	Male/Female prolonguer for Balancer Thunder Power 6S
1 x	PSC 5
1 x	SBEC 40
1 x	PowerBox SparkSwitch RS
1 x	Pins M connect Multipin connectors AWG 20-24
1 x	Extension 5 lipos JST/C - JST
1 x	MAX BEC
1 x	XH male balance (5S) connector (2 pcs)
1 x	Parachute expulsion foam
1 x	Foil for sticking flaps and ailerons
1 x	Stainless steel cable Ø 1.3 mm (10 m)
1 x	Round Rod 3,0x1000 mm
1 x	Red copper lacquer wire Ø0,2 mm (5 m)
1 x	Circlick securite
1 x	SIG Coverall 1.2x4.5 m
1 x	3,2x1000 mm 2:1 red termoretract tube
1 x	12,7x1000 mm 2:1 green termoretract tube
2 x	PVC transparent battery termo-retract 70 mm (10 m)
1 x	Solarfilm Lite blue transp. 5m
2 x	PVC blue transparent battery termo-retract 95 mm (1 m)
1 x	PVC termo-retract battery 95 mm blue transparent (1 m)
2 x	PVC yellow transparent battery termo-retract 68 mm (1 m)
1 x	1,6x1000 mm 2:1 black termoretract tube
1 x	PVC yellow battery termo-retract 69 mm (10 m)
1 x	PVC termo-retract battery 45 mm transparent orange (1 m)
2 x	68 mm PVC transparent battery termo-retract 68 mm (1 m)
1 x	58 mm PVC transparent battery termo-retract 68 mm (1 m)
1 x	Receiver replacement antenna, approx. 85
1 x	Ply-Span 450x600/13g Red
1 x	Big-Malibu XL Roof box with surfboard rack GREY
1 x	Transmitter Crystal 35 Mc/s Ch 62
1 x	MZ-12, 6 Channel HoTT
1 x	Propeller hub spacer 8/5.5
1 x	JETImodel DPS 40
1 x	Cabel PVC 2 x 0.25 mm2 (5 m) red-black
1 x	Oratex White 2m
1 x	PVC 0,35 qmm servos wire Graupner (100 m)
1 x	Aluminium sheet 500x250x0,5mm
1 x	Oratex Antik 2m
1 x	Female prolonguer XH 30 cm 6 cell cable of silicone 0,25 mm
1 x	Female connector for 12 pines AWG
1 x	Female connector for 16 pines AWG
1 x	SPARK Switch 5.9v
1 x	Male connector for 16 pines AWG
1 x	Hose clips 6 mm
1 x	MZ-10, 5 Channel HoTT
1 x	White silicone 0,25 mm² wire (25 m)
1 x	Oratex Red Fokker 10 m
1 x	PVC blue transparent battery termo-retract 68 mm (10 m)
1 x	PVC yellow transparent battery termo-retract 69 mm (10 m)
1 x	2 LiPo XH>EH adapter
1 x	4,8x1000 mm 2:1 blue termoretract tube
1 x	PVC 0,08 qmm Graupner servos wire (5 m)
1 x	Oracover light Grey 2m

5,323.45EUR