Top » Catalog » Hardware » Adhesives/Resin/Epoxy » Cianocrylate » Cyanocrylate R&G » R1501022

4.47EUR

CA Glue (medium) 20g
[R1501022]

CA Glue (medium) is a medium viscosity cyanoacrylate adhesive, suitable for bonding applications that require a larger gap fill.
Its medium cure speed and medium viscosity makes CA Glue (medium) suitable for a lot of industrial applications.
Single-component
Transparent
Solvent-free
Special bottle*
*A metal needle is fitted in the lid, which is pressed into the opening of the bottle's dosing attachment when it is screwed on. This reliably prevents leakage, drying out and sticking of the opening. The dosing attachment allows a fine dosing of the adhesive.

temporarily out of stock

Reviews

Customers who bought this product also purchased

TYGON tubo 1 m Diam. 3.4 x 2.0 mm temporarily out of stock	Tygon tube 6.35 - 3.18 mm 1m temporarily out of stock	Propeller MENZ-S 23x8 temporarily out of stock
Sparkplug NGK CM6 temporarily out of stock	Conector BEC female (10 pcs) temporarily out of stock	XT-60 connector (female) temporarily out of stock

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->

  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
    Cianocrylate->
      BSI Cianocrilates
      Cyanocrylate R&G
      KAVAN Ciano
      Yuki Model
    Epoxy->
    Resin/Gelcoat
    Glass Bubbles
    Contact adhesive
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

Carbon tube 3K-PW (L 1000 mm, Ø12 mm, Ø10 mm)
22.00EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

3 x	Servo TT ACE SHV 1504 MG
1 x	Towing hook
1 x	Tow hook for tug
1 x	Fixed launching hook
1 x	Towing hook <3m
1 x	SSPS105 Super Hi-Power servo
1 x	PS-050 TONEGAWA Servo
1 x	Hovercraft sailcloth
1 x	2000A 12V Lithium Jump Starter with 150PSI Air inflator
1 x	SAVOX SH 0254 servo
1 x	ABS tube 2.0x1.0x1000 mm
1 x	Steel tube (L 1000 mm Ø8 mm, Ø7,7 mm)
1 x	Steel tube (L 1000 mm Ø10 mm, Ø9,7 mm)
1 x	Steel tube (L 1000 mm Ø9 mm, Ø8,7 mm)
1 x	ABS tube 5.0x3.0x1000 mm
1 x	CF tube set (Ø 38 mm y Ø 14 mm)
1 x	ABS tube 9.0x8.0x1000 mm
1 x	Connectors banna oro 3 mm (M/F)
1 x	Connector CAN 15
1 x	Gold antispark 4 mm plug
1 x	Connectors banna oro 0,8 mm (M/F)
1 x	Optotronix Aurora Plug
1 x	Connectors banna oro 4 mm (M/F)
1 x	Wing connector 8pin with pin strip, plug & socket
1 x	Gold antispark 5,5 mm plug
1 x	Connectors banna oro 8,0 mm (Male) 5 pcs.
1 x	Connectors banna oro 3,5 mm (M/F)
1 x	Connectors DEANS (T)
1 x	XH male balance (4S) connector (2 pcs)
1 x	Connectors banna oro 8,0 mm (M/F)
1 x	Conector Servo female 4 pines
1 x	30 cm DEANS female connector
1 x	Connectors banna oro 4 mm (M/F) (ultralight)
1 x	Conector BEC female (10 pcs)
1 x	2 mm male connector (2 pcs) with safety connector
1 x	Connectors banna oro 6,0 mm (M/F)
1 x	Conector AS150 7mm antichispazo (Set: 2 pares)
1 x	XH female balance (3S) connector (2 pcs)
1 x	Banna gold connector 2,5 mm (M/F)
1 x	Connectors banana oro 6,0 mm Ultralight (M/F)
1 x	2 mm female connector (2 pcs) with safety connector
1 x	XH male balance (2S) connector (2 pcs)
1 x	Connectors DEANS 4 pins (1 pair)
1 x	XH female balance (4S) connector (2 pcs)
1 x	Connectors banna oro 8,0 mm 5 pcs(Female)
1 x	Connectors banna oro 2 mm (M/F)
1 x	EC5-Set female, simple quality, 2 x female pin, 1 x blue housing
1 x	Flat washer 2.2 mm (20 pcs)
1 x	Aluminium wide washer M4 Gold (4 pcs)
1 x	Aluminium cap bolt washer M3 blue (8 pcs)
1 x	Quicklock washer 2 mm (10 pcs)
1 x	Circlik for shaft 1.5 mm (10 pcs)
1 x	Straightened rod Ø 5.5 mm x 1000 mm
1 x	Lock washer 2.2 mm (20 pcs)
1 x	Straightened rod Ø 1.2 mm x 1500 mm
1 x	Straightened rod Ø 0.8 mm x 1000 mm
1 x	Brass rod Ø 1.0 mm x 1000 mm
1 x	Flat washer 4.3 mm (20 pcs)
1 x	Flat washer 3.2 mm (20 pcs)
1 x	Straightened rod Ø 1.0 mm x 1000 mm
1 x	Spring lock washer 2.6 mm (20 pcs)
1 x	Straightened rod Ø 8.0 mm x 1000 mm
1 x	Lock washer 4.3 mm (20 pcs)
1 x	Straightened rod Ø 0.5 mm x 1000 mm
1 x	Quicklock washer 1 mm (10 pcs)
1 x	Brass rod Ø 0.5 mm x 1000 mm
1 x	Flat washer 2.7 mm (20 uds)pcs)
1 x	Carbon fiber flat 1000x3.0x0.13 mm
1 x	Premium servo extension 75cm
1 x	Carbon fiber flat 1000x3.0x0.5 mm
1 x	Extension PVC 150 cm (Graupner)
1 x	Spray Graphit 33
1 x	Digital Air Speed Sensor And Pitot Tube Set
1 x	Ball Link Plier
1 x	Green silicone 0,25 qmm wire (50 m)
1 x	EasyFLY Addon
1 x	SAVOX SH 0255 MG servo
1 x	La Capitania di Venetia 1:50
1 x	25 mm carbon servo arm
1 x	Hinge 4x14 mm (20 pcs)
1 x	USB programador GO servos
1 x	Servo GO-1017MG 4.5 kg.cm 0.10s/60º
1 x	Servo GO-1081 MG 45 kg.cm 0.085s/60º
1 x	Servo Robbe FS 525 BB MG HV
1 x	Servo KST BLS815 HV V2.0 Servo 20mm 70g 20Kg
1 x	Carbon fiber flat 1000x3.0x1.0 mm
1 x	Nut for mounting M3 (10 pcs)
1 x	Hexagonal Nut M2 (10 pcs)
1 x	Tornillo cabeza boton M4x12 mm (5 pcs)
1 x	Blue Aluminium lock nut M3 (4 pcs)
1 x	Nut for mounting M6 (4 pcs)
1 x	Bungee HLG Premium
1 x	Savox HV Brushless Servo SB-2270SG (Swashplate)
1 x	Nylon hinge 20x15x0,3 (10 pcs)
1 x	Pin type hinge Al 3,0x50 mm (2 pcs)
1 x	67 mm cylidric hinge Ø 4,5 mm (5 pcs)
1 x	Pin type hinge Al 3,0x50 mm demount (2 pcs)
1 x	Gates hinge 30x16 mm (2 pcs)
1 x	67 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
1 x	Cylidric hinge 43 mm Ø 2,5 mm (5 pcs)
1 x	Canopy hinges for Discus 2c, Discus 2a, Ventus 2cx (2pcs)
1 x	Cylidric hinge 33 mm Ø 2 mm (5 pcs)
1 x	Micro flex hinge (12 uds)
1 x	Fast'n EZ-CA-Hinge, lite (12 uds)
1 x	43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs)
1 x	Nylon hinge 15x0,3 (10 pcs)
1 x	Nylon hinge for flaps/gates 27x10,5 (2 pcs)

2,581.38EUR