Top » Catalog » Hardware » Adhesives/Resin/Epoxy » Cianocrylate » Cyanocrylate R&G » R1501022

4.47EUR

CA Glue (medium) 20g
[R1501022]

CA Glue (medium) is a medium viscosity cyanoacrylate adhesive, suitable for bonding applications that require a larger gap fill.
Its medium cure speed and medium viscosity makes CA Glue (medium) suitable for a lot of industrial applications.
Single-component
Transparent
Solvent-free
Special bottle*
*A metal needle is fitted in the lid, which is pressed into the opening of the bottle's dosing attachment when it is screwed on. This reliably prevents leakage, drying out and sticking of the opening. The dosing attachment allows a fine dosing of the adhesive.

temporarily out of stock

Reviews

Customers who bought this product also purchased

Propeller MENZ-S 23x8 temporarily out of stock	Sparkplug NGK CM6 temporarily out of stock	TYGON tubo 1 m Diam. 3.4 x 2.0 mm temporarily out of stock
Tygon tube 6.35 - 3.18 mm 1m temporarily out of stock	XT-60 connector (male) temporarily out of stock	Extender tip (6 pcs) temporarily out of stock

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->

  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
    Cianocrylate->
      BSI Cianocrilates
      Cyanocrylate R&G
      KAVAN Ciano
      Yuki Model
    Epoxy->
    Resin/Gelcoat
    Glass Bubbles
    Contact adhesive
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

PowerBox MicroSwitch
31.90EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

1 x	5 mm M2 variable horn
1 x	Cable control set
2 x	Brass control horn M4 short for wire (4 pcs)
1 x	Brass control horn M2 long for wire (10pcs)
1 x	6 mm M3 variable horn
1 x	Horn 5/20 with M2 Bearing
1 x	Brass control horn M2 short for wire (2 pcs)
1 x	6 mm red aluminium threaded horn with patella
1 x	20 mm carbon horn
1 x	Cable with accesories
2 x	Horn 6/20 with M3 Bearing
2 x	Horn mando small (2 pcs)
3 x	Fully Threaded Steel Rod M2,5 (2 uds)
2 x	Horn 16,5x20 mm (2 pcs)
1 x	Horn for flap control (1 pcs)
1 x	Extra-long adjustable aluminium control horn 2,8x34
3 x	Control horn long w/ball
1 x	Brass control horn M4 short for wire (10pcs)
2 x	Horn 5/10 with M2 Bearing
2 x	Horn F3A de Titanium 16 mm (2 units)
3 x	Brass control horn M2 large for wire (2pcs)
1 x	6 mm blue aluminium threaded horn with patella
1 x	Horn 5/15 with M2 Bearing
1 x	Horn DU-BRO 1/2 (2 pcs)
1 x	Duralumium F3A horn 30x10x23,5 mm (2 pcs)
1 x	Horn mando long (2 pcs)
1 x	Horn 6/27 with M3 Bearing
1 x	Adjustable brass horn threaded M3
2 x	6 mm aluminium horn with patella
1 x	Horn 6/35 with M3 Bearing
1 x	Jeti Black cap
1 x	XH male balance (5S) connector (2 pcs)
1 x	Connectors banna gold 5,5 mm (M/F)
1 x	XH female balance (5S) connector (2 pcs)
1 x	Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch 5 m
1 x	Connectors banna oro 8,0 mm 5 pcs(Female)
1 x	Connectors banna oro 2 mm (M/F) (ultralight)
2 x	Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 5 mm
2 x	Conector BEC female (10 pcs)
2 x	Connectors banna oro 4 mm (M/F) (ultralight)
1 x	XH male balance (4S) connector (2 pcs)
1 x	Gold antispark 5,5 mm plug
1 x	Connectors banna oro 2 mm (M/F)
1 x	Connectors banna oro 8,0 mm (M/F)
2 x	Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch
1 x	Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 7 mm
1 x	Extra long horn 60x30
1 x	Long extra-strong control horn with bearing 2,8x34
1 x	XH male balance (2S) connector (2 pcs)
1 x	XH female balance (4S) connector (2 pcs)
1 x	Connectors DEANS (T)
1 x	Connectors banana oro 6,0 mm Ultralight (M/F)
1 x	Gold antispark 4 mm plug
3 x	Sistema LDS - Ø12 mmr servos Ø 6/25 spline 60º (Futaba) pitch 6
1 x	2 mm female connector (2 pcs) with safety connector
1 x	30 cm DEANS female connector
1 x	Connectors banna oro 3 mm (M/F)
2 x	Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 6 mm
1 x	Connectors banna oro 0,8 mm (M/F)
1 x	Horn micro type4 Ø 0,5 (2 pcs)
1 x	Horn DUBRO 1/2A
1 x	Horn with ball 40x30
1 x	Carbon fibre tube -TAPERED- 3k-PW (10 x 5 x 0.3) x 880 mm
1 x	Carbon tube (L 1000 mm, Ø16 mm, Ø12 mm)
1 x	ABS tube 4.0x2.0x1000 mm
1 x	ABS tube 8.0x6.0x1000 mm
1 x	ABS tube 7.0x5.0x1000 mm
1 x	ABS tube 12.0x10.0x1000 mm
1 x	ABS tube 5.0x4.0x156 mm
1 x	ABS tube 2.0x1.0x1000 mm
1 x	ABS tube 3.0x1.0x1000 mm
1 x	ABS tube 7.0x6.0x1000 mm
1 x	Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm)
1 x	Carbon tube (L 1000 mm, Ø10 mm, Ø8 mm)
1 x	ABS tube 9.0x8.0x1000 mm
1 x	ABS tube 3.0x2.0x1000 mm
1 x	ABS tube 6.0x5.0x1000 mm
1 x	Aluminium tube (L 1000 mm, Ø3.0 mm, Ø2.1 mm)
1 x	ABS tube 6.0x4.0x1000 mm
1 x	Digital scale up to 40 kg
1 x
1 x	Fresa corte diamante Ø 1.4mm (bola)
1 x	Cut tube
1 x	Fabric scissors curved (offset handles), 16 cm / 6" length
1 x	Digital weight, angle and balance meter BASIC
1 x	Fresa corte diamante Ø 2.3mm (bola)
1 x	Ball Link Plier
1 x	2,0x50 mm allen screwdriver
1 x	Fresa corte diamante Ø 2.35mm (flame)
1 x	Concave-Convex sandpaper file 13 mm
1 x	Copier 5x20 cm pcs
1 x	Fresa corte diamante Ø 1.0mm (bola)
1 x	Crimping tool
1 x
1 x	Disposable Injector Bags (30x16cm) 100 pcs
1 x	2,5x60 mm allen screwdriver
1 x	Aramid fibre shears Proton®, 21 cm / 8" length
1 x	EC-Cutter
1 x	55% silver electrodes (2 pcs)
1 x	Copier 2x20 cm pcs
1 x	Boxed KIT OF 7 Rotary Burrs FINE
1 x	Dean-T Plug Mold
1 x
1 x	3,0x60 mm allen screwdriver
1 x	Small aluminium horn red (2pcs)
1 x	ABS angle 5,0x5,0x1000 mm
1 x	Round Rod 1,5x1000 mm
1 x	Support Flush MPX Conector (6 pcs)
1 x	Banna gold connector 2,5 mm (M/F)
1 x	Connectors banna oro 3,5 mm (M/F)
1 x	Conector FUTABA Servo male BLUE silicon (10 pcs)
1 x	30 cm MULTIPLEX female connector
1 x	Connector CAN 15
1 x	Conector MT-60 (pair)
1 x	Small aluminium horn gold (2pcs)
1 x	PIN Connector female (100 pcs)
1 x	Threaded coupler ALU M2 Ø 3 (2 uds)
1 x	Rudder forward 80x28 "type Kato"
1 x	Threaded coupler ALU Left M2,5 Ø 3 (2 uds)
1 x	MPX screwable clips (5 pcs)
1 x	Wing connector 8pin with pin strip, plug & socket
1 x	Horns indoor

2,321.38EUR