Top » Catalog » Hardware » Adhesives/Resin/Epoxy » Cianocrylate » Cyanocrylate R&G » R1501022

4.47EUR

CA Glue (medium) 20g
[R1501022]

CA Glue (medium) is a medium viscosity cyanoacrylate adhesive, suitable for bonding applications that require a larger gap fill.
Its medium cure speed and medium viscosity makes CA Glue (medium) suitable for a lot of industrial applications.
Single-component
Transparent
Solvent-free
Special bottle*
*A metal needle is fitted in the lid, which is pressed into the opening of the bottle's dosing attachment when it is screwed on. This reliably prevents leakage, drying out and sticking of the opening. The dosing attachment allows a fine dosing of the adhesive.

temporarily out of stock

Reviews

Customers who bought this product also purchased

Tygon tube 6.35 - 3.18 mm 1m temporarily out of stock	Propeller MENZ-S 23x8 temporarily out of stock	Sparkplug NGK CM6 temporarily out of stock
TYGON tubo 1 m Diam. 3.4 x 2.0 mm temporarily out of stock	XT-60 connector (male) temporarily out of stock	Extender tip (6 pcs) temporarily out of stock

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->

  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
    Cianocrylate->
      BSI Cianocrilates
      Cyanocrylate R&G
      KAVAN Ciano
      Yuki Model
    Epoxy->
    Resin/Gelcoat
    Glass Bubbles
    Contact adhesive
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

ProgBox PRO LCD Hobbywing
44.90EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

3 x	USB Mini Camera endoscope
2 x	Camera Sony 4140+673 CCD with Built-in 200mw TX + antenna
1 x	Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm)
1 x	Carbon tube (L 1000 mm, Ø1.5 mm, Ø0.7 mm)
1 x	Carbon tube (L 1000 mm, Ø18 mm, Ø16 mm)
1 x	ABS tube 8.0x6.0x1000 mm
1 x	Aluminium tube (L 1000 mm, Ø4.0 mm, Ø3.1 mm)
1 x	ABS tube 9.0x7.0x1000 mm
1 x	ABS tube 12.0x10.0x1000 mm
1 x	ABS tube 6.0x5.0x1000 mm
1 x	ABS tube 20.0x18.0x1000 mm
1 x	ABS tube 14.0x10.0x1000 mm
1 x	Carbon tube (L 1000 mm, Ø16 mm, Ø14 mm)
1 x	ABS tube 7.0x6.0x1000 mm
1 x	Carbon tube (L 1000 mm, Ø14 mm, Ø12 mm)
1 x	Carbon fibre tube -TAPERED- 3k-PW (10 x 5 x 0.3) x 880 mm
1 x	ABS tube 3.0x1.0x1000 mm
1 x	ABS tube 6.0x4.0x1000 mm
1 x	Clevis plastico I=44 mm / hole 3mm / pin 2 (2 pcs)
1 x	Clevis plastico I=26 mm / hole 2mm / pin 1 (2 pcs)
2 x	Cable coupler M2x66 (2 uds)
1 x	800TVL CMOS camera for FPV
1 x	BRASS CONTROL HORN M3x16 mm 2pcs
1 x	Kwik link AL M4 L:40 mm (2 pcs) + Pin Ø 2,5 mm
1 x	Kwik link AL M3 L:30 mm (2 pcs) + Pin Ø 2,0 mm
1 x	Kwik link AL M2,5 L:23 mm (2 pcs) + Pin Ø 1,6 mm
1 x	Fully Threaded Steel Rod M2,5 (2 uds)
2 x	Aluminium coupler M2/2 with ball bearing (1 pcs)
1 x	Cable coupler M3 (10 uds)
2 x	Couple M4 for wire (10 pcs)
1 x	Cable coupler M2 (10 uds)
2 x	Kwik link AL M3 con Clip (2 pcs)
1 x	Ball Link M2 with Ball and Hardware, 10 pcs
1 x	Aluminium blue ball links M3 V1 (10 pcs)
2 x	Kwik link AL M3 L:30 mm (2 pcs) + Pin Ø 1,6 mm
1 x	Black silicone 1,0 qmm wire (50 m)
1 x	JR silicone servo wire 0,35 qmm / 5m
1 x	Cable servo PREMIUM MAXI 10m (blanco/rojo/azul) PVC
1 x	Blue silicone 0,5 qmm wire (50 m)
1 x	Black silicone 0,25 mm² wire (25 m)
1 x	Cable servo PREMIUM MAXI 100m (blanco/rojo/azul) PVC
1 x	Cable servo PREMIUM 1 m (blanco/rojo/negro) AWG21 + AWG26 TPE
1 x	50m servo "Premium" wire (white/red/blue)
1 x	Cable set PREMIUM Maxi, SUB-Done 4three fuselage/wing 200 cm
1 x	Green silicone 0,25 mm² wire (25 m)
1 x	Fiberglass heat shield Ø 8 mm 1000 mm
1 x	10m servo "Premium" wire (white/red/blue)
1 x	Cable set Premium™ MAXI "one4two"
1 x	Protective Cover for wires Ø 20 mm 1000 mm
1 x	Protective Cover for wires Ø 15 mm 1000 mm
1 x	Conexion PREMIUM MAXI fuselaje/alas 200 cm one4one
1 x	DYNAMOMETER S-1580
1 x	Marker ties (20 pcs)
1 x	Tape GFK 50 mm
1 x	Extension silicon 25 cm (Futaba)
1 x	A/C economy plywood 600x300x6+.0 mm
1 x	Lock washer 2.2 mm (20 pcs)
1 x	Red copper lacquer wire Ø0,2 mm (5 m)
1 x	ORACOVER Ferrari red (2 m)
1 x	XH male balance (4S) connector (2 pcs)
1 x	Streamline Stainless Steel Tubing 6.3x3.5x1000 mm
1 x	Carbon tube 3K-PW (L 1000 mm, Ø18 mm, Ø16 mm)
1 x	Extinguisher CO2 - 2 Kg
1 x	Carbon tube 3K (L 1000 mm, Ø 8 mm, Ø 7 mm)
1 x	Carbon tube (L 2000 mm, Ø16 mm, Ø14 mm)
2 x	Carbon tube (L 1000 mm, Ø10 mm, Ø8 mm)
1 x	Hard brass tubing (L 1000 mm, Ø13.0 mm, Ø12.0 mm)
1 x	Hard brass tubing (L 1000 mm, Ø11.0 mm, Ø10.0 mm)
1 x	Carbon tube 3K-PW (L 1000 mm, Ø14 mm, Ø12 mm)
1 x	Fiberglass tube 6/4x1000mm
2 x	Carbon tube 3K-PW (L 1000 mm, Ø30 mm, Ø26 mm)
1 x	Carbon tube 3K-PW (L 1000 mm, Ø20 mm, Ø18 mm)
1 x	Carbon tube 3K-PW (L 1000 mm, Ø30 mm, Ø27 mm)
1 x	Canopy Latch
1 x	Cable grommet Ø 5 mm (4 uds)
1 x	Kwik link AL M3 L:40 mm (2 pcs) + Pin Ø 2,5 mm
1 x	Pulley brass 2,5/1 (2 pcs)
1 x	KAVAN Hand crank fuel pump
1 x	Variable Flow Smoke Pump System
1 x	Ø 1,6 mm pin for Kwik link MPJ2160/2161 (6 pcs)
1 x	Kwik link aluminio IZD. M3 L: 30mm (2 uds) pin Ø 2 mm
1 x	Metal clevis M2 (10 uds)
1 x	Micro clevis (10 uds)
1 x	Pin 3,0 to cable coupler M3,0 ⌀ (6 pcs)
1 x	RCEXL Electronic ignition twin A-02
1 x	Cable coupler M2,5 (2 pcs)
1 x	ABS tube 5.0x4.0x156 mm
1 x	Aluminium ignition bad (blue)
1 x	ABS tube 10.0x8.0x1000 mm
1 x	Ø 1,6 mm pin for Kwik link MPJ2150/2157 (6 pcs)
1 x	Carbon tube (L 1000 mm, Ø16 mm, Ø12 mm)
1 x	ABS tube 5.0x3.0x1000 mm
1 x	Clevis plastico I=30 mm / hole 2.5mm / pin 1 (2 pcs)
1 x	ABS tube 5.0x4.0x1000 mm
1 x	Electric Fuel Pump 12V
1 x	Ball link Aluminio M3 (2 pcs)
1 x	Micro clevis 0.8 mm(10 uds)
1 x	Cable coupler M2 (10 uds)
1 x	Electric Fuel pump
1 x	Ball link V1 Ø7 M4/3 (6 uds)
1 x	Opto Gas Engine Kill Switch
1 x	Compact on-board starting system (9715)

3,039.96EUR