55.00EUR

PowerBox DigiSwitch V2 MPX/JR
[POWER6432]


Product description

The PowerBox DigiSwitch V2 is the second generation of the PowerBox Digi- Switch, which is well-known throughout the world. For almost fifteen years the PowerBox DigiSwitch has represented the standard for small to medium-sized models thanks to its compact format and versatility.
By using the latest components we have been able to reduce the size of the Digi-Switch V2 by about 20 %.
The introduction of a top-quality aluminium case, machined and anodised, has brought a substantial increase in the unit’s cooling efficiency, with the result that the maximum continuous current capacity of the PowerBox DigiSwitch V2 is around 20 % higher. In fact, the peak load capacity is twice as high: the DigiSwitch V2 can handle more than 10 A for several seconds!
The DigiSwitch V2 offers four user-selectable output voltages: for normal servos it can be set to a regulated 6.0 V, regulated voltages of 7.0 V and 7.6 V are available for HV servos, as is an option for non-regulated voltage.
Power to the unit can be drawn from four different battery types: LiPo, LiIon, LiFePo, NiMH. Ultra-bright RGB LEDs are fitted to indicate battery voltage; they light up in various colours to display the charge status of the batteries.
CORE users also benefit from one special additional feature: the battery voltage and regulator voltage can be displayed directly at the transmitter via telemetry!


Features High-performance electronic switch
Ultra-light unit, compact format
Regulated output voltage
User-selectable output voltage: 6.0 V/7.0 V/7.6 V or non regulated
RGB LED voltage indicator for the battery
Telemetry support for CORE systems
Supports 4 different battery types: 2s LiPo, 2s LiIon, 2s LiFePo and 5s NiMH
Regulator monitoring
Suppression of servo feedback currents

Technical Data
Operating voltage 4.0V - 9.0V
Power supply 2s LiPo, 2s LiIon, 2s LiFePo, 5s NiMH
Current drain Power-on state 23 mA
Current drain Standby 4 μA
Maximum load current max. 10 A
Drop-out voltage 0.1 V
Output voltage 6.0 V/ 7.0 V/7.6 V stabilised or non-regulated
Dimensions 50 x 18 x 11 mm
Weight 15 g
Temperature range -30 °C to +75 °C


temporarily out of stock
temporarily out of stock

Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm)
2 x CC 02
1 x Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH
1 x CC 03
1 x MPX-Dean "T" Adapter
2 x CC 01
1 x TP/TopFuel - XH 2/3S Adapter
1 x Adapter lead MPX/XT60
1 x Futaba External voltage input cable Futaba CA-RVIN-700
1 x CM-3
2 x BEC 3A FOXY
1 x Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH
1 x 3 copper lacquer wire Ø0,2 mm (1 m)
1 x RUDDOG Protection and Heat Shield Tape (2mx50mm)
1 x Tape GFK 38 mm
1 x SE Ring 350 mm (2 pcs)
1 x 26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x SE Ring 360 mm (2 pcs)
2 x 5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x SE Ring HACKER 300 mm (2 pcs)
2 x SE Ring 240 mm (2 pcs)
1 x Marker ties (20 pcs)
1 x Pad self adhesive, up to 3mm / 0.12″, (10 pcs)
1 x 13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x SE Ring 250 mm (2 pcs)
1 x Straightened rod Ø 14.0 mm x 1000 mm
1 x Propeller POWER-PROP 14x9 Izda
1 x DUPLEX 2.4EX Central Box 210
1 x Sandwich carbon + poplar 4mm + carbon 480x290 mm
1 x FALCON 20X9 CARBON PROPELLER (GAS)
1 x Propeller POWER-PROP 14x9
1 x Propeller POWER-PROP 13x9 Izda
1 x Aluminium cap bolt washer M3 green (8 pcs)
1 x Spring lock washer 3.1 mm (20 pcs)
1 x Aluminium wide washer M4 Black (4 pcs)
1 x Aluminium wide washer M3 blue (4 pcs)
1 x Aluminium cap bolt washer M3 blue (8 pcs)
1 x Quicklock washer 1 mm (10 pcs)
1 x GameCommander USB Universal
1 x SIMtransmitter 6 Mode 2
1 x Lock washer 2.2 mm (20 pcs)
1 x Flat washer 3.2 mm (20 pcs)
1 x Quicklock washer 2.5 mm (10 pcs)
1 x Circlik for shaft 1.2 mm (10 pcs)
1 x Aluminium cap bolt washer M4 red (8 pcs)
2 x EasyFLY Addon
1 x Lock washer 4.3 mm (20 pcs)
1 x Aluminium cap bolt washer M3 black (8 pcs)
1 x M3 black washers (4 pcs)
2 x RF9 Flight Simulator with Spektrum Controller
1 x Simulador RealFlight RF-9.5 S (sin emisora)
1 x Flat washer 1.7 mm (20 pcs)
1 x Flat washer 2.7 mm (20 uds)pcs)
1 x Quicklock washer 3 mm (10 pcs)
1 x Quicklock washer 3.5 mm (10 pcs)
1 x Flat washer 4.3 mm (20 pcs)
1 x Aluminium wide washer M4 Blue (4 pcs)
1 x Spring lock washer 2.1 mm (20 pcs)
1 x M3-M4 rubber washer (8 pcs)
1 x Aluminium cap bolt washer M4 blue (8 pcs)
1 x Quicklock washer 4 mm (10 pcs)
1 x Spring lock washer 4.1 mm (20 pcs)
1 x Round Rod 2,0x1000 mm
1 x ABS Strip 1.0x4.0x1000 mm
1 x Strip ABS 2.0x5.0x1000 mm
1 x ABS Strip 1.5x6.0x1000 mm
1 x Round Rod 1,5x1000 mm
1 x Ferrita con funda
1 x ABS Strip 1.5x3.0x1000 mm
1 x Strip 1,5x1,5x330 mm
1 x Ferrita 27x14x7 mm
1 x ABS Strip 1.0x3.0x1000 mm
1 x Strip 2,0x2,0x330 mm
1 x Strip ABS 2.0x3.0x1000 mm
1 x ABS Strip 1.0x5.0x1000 mm
1 x Strip ABS 2.0x8.0x1000 mm
1 x ABS tube 14.0x10.0x1000 mm
1 x Carbon tube (L 1000 mm, Ø18 mm, Ø16 mm)
1 x Carbon rectangular rod 10.0 mm x 1.0 x 1000 mm
1 x Male connector JST SH 1.0mm with 10 cm wire
1 x Short Switch On/Off micro
1 x Male connector for 10 pines AWG
1 x 5 LiPo XH>EH adapter
1 x 2 LiPo XH>EH adapter
1 x 4 LiPo XH>EH adapter
1 x CC 05
1 x DUPLEX USBa USB-Adapter for Jeti Duplex Items
1 x SPARK Switch 5.9v
1 x 3 LiPo XH>EH adapter
1 x Slave-cable USB Easy Sim
1 x Spare Part Frame Set for EACHINE RACER 250
1 x Propadapter for motor A50
1 x Futaba male 40 cm extension
1 x Cable silicona female batt. receptor 30 cm (Futaba)
1 x Extension silicon 30 cm female (Futaba)
1 x Cable S.BUS 3 salidas 100 mm
1 x Extension 7.5 cm
1 x Motor Mega AC 16/15/05 CE F5J
1 x Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs)
1 x TP/TopFuel - JST-EH 4/5S Adapter
2 x FesEx-Uni8 System
1 x AXI 2820/12 V2 Long
1 x 13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x AXI 2212/12 V2
1 x Fan for A60
1 x Motor Mega AC 16/20/02
2 x Mobile Terminal
1 x SE Ring 480 mm (2 pcs)
1 x AXI 4120/14 V2
1 x Screwdriver for Hexagon 1,27mm
1 x Tape GFK 50 mm
1 x Ring 320 mm length (5 pcs)
1 x QUANTUM II 55 Brushless Motor
1 x Alu-Cross for Backmount of A60-V2-Backmountmotors
1 x MEGA AC 16/10/03 Race + PG 5:1 F5J motor brushless
2 x SE Ring 200 mm (2 pcs)
1 x Servo Arm 25T M3 KAVAN 6.5 / 19.6 mm
1 x Epoxy adhesivo Elan-tech ADH 981.892 50ml (dark grey)
1 x Axi for motor A40-L Motor 8-Pole-Electric Turbine
1 x 0,14 mm PVC servo wire extension, ZH micro conector.
1 x Circlick securite
1 x Cabel "Y" 30 cm (graupner)
1 x Futaba Female 40 cm extension
1 x 200 mm extensión servo HITEC/JR
1 x Motor Mega AC 16/15/03
1 x 10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x Screwdriver for Torx® TX8
1 x Servo GO-1023MG 7.0 kg.cm 0.09s/60º
1 x Connectors banna oro 8,0 mm (Male) 5 pcs.
1 x Cable servo PREMIUM 1 m (blanco/rojo/negro) AWG21 + AWG26 TPE
1 x Aluminum Bayonet / strongal D35 mm / 1 m
1 x AXI 2217/20 V2 Long "F5J"
1 x 
1 x SE Ring 330 mm (4 pcs)
2 x 20x200 mm battery rings
1 x Xoar Electric Beechwood Prop 21x10
1 x Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs)
1 x 20x1000 mm Ring Strap Back To Back
1 x Axle for motor A30-XL V2
1 x Motor Mega AC 16/25/01E 3.17mm
1 x Motor Mega AC 16/25/02
1 x Waterproof adhesive tape, width 19mm, length 25m
1 x Epoxy L 40 min. (1 Kg) 715g Resina / 285g Hardener S (15 min)
1 x Motor Mega AC 16/10/03 RACE
1 x 120x60 mm SLH KOVO wheel
1 x Axle for motor A20-S (3 uds)
1 x Tape GFK 25 mm
1 x Backmountset complete A40
1 x AXI 2217/12 V2
1 x AXI 2808/20 V2 Long
1 x AXI 2212/20 V2
1 x Motor Mega AC 16/30/01
1 x Carbon tube 3K-PW (L 1000 mm, Ø25 mm, Ø21 mm)
1 x Aluminun wheel collar 4 mm Ø (4 uds)
1 x Wheel collar 5 mm Ø (4 uds)
4,550.14EUR
Manufacturers
Languages
Español English
Currencies