Top » Catalog » Planes » Gasoline-Glow » Acrobatics » PILOTSLI103C01

1,450.00EUR

SLICK 103" Red/Yellow/Black ARF (Color 2) 2630 mm
[PILOTSLI103C01]

SLICK 103" Red/Yellow/Black ARF (Color 2) 2630 mm

Pilot-RC already surprised everyone with a new level of precision and agility with our extremely popular Laser. We have now taken all these great features and grown them into our new Slick.
The Pilot-RC Slick, as well as looking great and offering color schemes designed by legendary Italian designer Mirco Pecorari at Aircraft Studio Design, it once again flys as good as it looks, and that is really saying something!
All the crazy agility and manoeuvrability of the Laser, while keeping the friendly flying characteristics of Pilot-RC planes, the new Slick offers an even further improvement in precision and aero musical performance, feeling like a larger plane, a larger plane that can go nuts!
At Aerobertics we are Pilot-RC dealer for many years and we try to keep as many planes in stock as possible. Together with our team full of experienced modellers, we can give you the right advise & service for your Pilot-RC plane. Also, we try to keep a lot of spare parts in stock, however if you are looking for something you can’t find on the website yet, feel free to contact us.

Required hardware:
Motor: 80-120cc or equivalent electric
Servos: 7-8 high torque (minimum 20kg) plus throttle // Uses x2 per aileron, x1 per elevator and x1 or x2 on rudder
Also requires all the usual accessories such as transmitter, receiver, propeller, batteries, powerbox, extension leads and possibly other small accessories.<
br> FEATURES
NEW! Hybrid construction from wood and composite materials for specially reinforced fuselage and wings.
NEW! Patented quick assembly system for wings, stabilizer and SFG
NEW! Patented quick assembly system for canopy.
Genuine German Oracover (Ultracote) covering
Highly prefabricated, experienced builders can have air ready in under a day
Pre-installed hinges (glued and pinned)
Internally mounted cowling – so no visible external screws exposed (two exposed screws underneath for easy mounting)
Removable wings and stabs
Laser engraved motor mounting position
Easy canister installation due to open construction
Pull push system for Rudder servo

Model: Slick – 103″
Wingspan: 103.8″ (2.638mm)
Length: 96.6″ (2.454mm)
Wing area: 1,863 “² (12,020 cm²)
Weight: 26.95lbs (12.2kg)

under request

Reviews

Quick Find

Shopping Cart

1 x	Mahogany wood slat 1.5x1.5x1000 mm
1 x	Quicklock washer 2.5 mm (10 pcs)
2 x	Linden wood slat 3.0x3.0x1000 mm
1 x	BALSA trip 3.0x5.0x1000 mm
1 x	Aluminium cap bolt washer M3 blue (8 pcs)
1 x	M3-M4 rubber washer (8 pcs)
1 x	Spring lock washer 2.1 mm (20 pcs)
1 x	BALSA trip 2.0x2.0x1000 mm
1 x	Aluminium wide washer M3 red (4 pcs)
1 x	Flat washer 1.7 mm (20 pcs)
1 x	Quicklock washer 1 mm (10 pcs)
1 x	Aluminium cap bolt washer M4 green (8 pcs)
1 x	Aluminium wide washer M3 blue (4 pcs)
1 x	Pine wood slat 2.0x10.0x1000 mm
2 x	Circlik for shaft 1.2 mm (10 pcs)
1 x	Quicklock washer 3 mm (10 pcs)
1 x	Walnut wood slat 3.0x3.0x1000 mm
2 x	Pine wood slat 10x10x1000 mm
1 x	BALSA triangular 10x10x1000 mm
1 x	Flat washer 3.2 mm (20 pcs)
1 x	Linden wood slat 2.0x2.0x1000 mm
1 x	Circlik for shaft 2.3 mm (10 pcs)
1 x	Circlik for shaft 1.9 mm (10 pcs)
1 x	Pine wood slat 1.5x3.0x1000 mm
2 x	Aluminium wide washer M3 gold (4 pcs)
1 x	Liston HAYA 8 x 8 x 1000 mm
1 x	Flat washer 4.3 mm (20 pcs)
1 x	Liston HAYA 10 x 10 x 1000 mm
1 x	Lock washer 3.2 mm (20 pcs)
1 x	Quicklock washer 2 mm (10 pcs)
1 x	Spring lock washer 2.6 mm (20 pcs)
1 x	Aluminium cap bolt washer M3 red (8 pcs)
2 x	Beech dowels 10 mm x 1000 mm
2 x	BALSA trip 2.0x10.0x1000 mm
1 x	Lock washer 2.7 mm (20 pcs)
1 x	Pine wood slat 2.0x2.0x1000 mm
1 x	BALSA triangular 15x15x1000 mm
2 x	BALSA trip 3.0x3.0x1000 mm
1 x	Quicklock washer 3.5 mm (10 pcs)
1 x	Aluminium wide washer M4 Black (4 pcs)
2 x	BALSA trip 8.0x8.0x1000 mm
2 x	BALSA triangular 8x8x1000 mm
1 x	Aluminium cap bolt washer M3 green (8 pcs)
1 x	Spring lock washer 4.1 mm (20 pcs)
2 x	Walnut wood slat 2.0x2.0x1000 mm
1 x	Mahogany wood slat 2.0x2.0x1000 mm
1 x	Beech dowels 4.0 x 1000 mm
1 x	Aluminium cap bolt washer M4 blue (8 pcs)
1 x	Pine wood slat 3.0x5.0x1000 mm
1 x	Lock washer 2.2 mm (20 pcs)
2 x	Pad self adhesive, up to 3mm / 0.12″, (10 pcs)
1 x	Foil for sticking flaps and ailerons
1 x	SE Ring 250 mm (2 pcs)
1 x	Tape GFK 38 mm
1 x	Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs)
1 x	SE Ring 300 mm (2 pcs)
2 x	SE Ring 450 mm (2 pcs)
1 x	Tape GFK 50 mm
1 x	Marker ties (20 pcs)
1 x	RUDDOG Protection and Heat Shield Tape (2mx50mm)
2 x	Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs)
1 x	20x1000 mm Ring Strap Back To Back
1 x	5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	ABS "T" angle 8.0x8.0x1000 mm
1 x	Cable S.BUS 3 salidas 300 mm
1 x	ABS angle 2,0x2,0x1000 mm
1 x	Extension silicon 10 cm (Graupner)
1 x	Streamline Stainless Steel Tubing 12.3x7.7x1000 mm
2 x	Extension lead 15 cm Multiplex
2 x	Flat Connector 4.0 mm x 1000 mm
1 x	Streamline Stainless Steel Tubing 7.5x4.5x1000 mm
1 x	ABS angle 3,0x3,0x1000 mm
1 x	Profile ABS Square 3 x 1000 mm
1 x	Profile ABS half cane 2.5x1000 mm
1 x	Profile ABS half cane 3x1000 mm
1 x	Extension silicon 10 cm (Futaba)
2 x	U Profile ABS 3,0x6,0x1000 mm
2 x	L-Connector 4.0 mm x 1000 mm
2 x	Futaba male 40 cm extension
1 x	Extension silicon 100 cm (Graupner)
2 x	U Profile ABS 5,0x10,0x1000 mm
1 x	Extension silicon 30 cm male (Graupner)
1 x	Premium servo extension 100cm
1 x	Streamline Stainless Steel Tubing 19.5x9.8x1000 mm
2 x	Cable silicona macho batt. receptor 30 cm (Graupner)
1 x	Premium servo extension 75cm
1 x	0,14 mm PVC servo wire extension, ZH micro conector.
1 x	Cable silicona macho batt. receptor 30 cm (Futaba)
1 x	200 mm extensión servo HITEC/JR
1 x	Extension silicon 35 cm male (Futaba)
1 x	ABS "T" angle 10.0x10.0x1000 mm
1 x	Premium servo extension 50cm
1 x	L-Connector 1.5 mm x 1000 mm
1 x	servo adapter lead, JST-SH socket - JR male Pin, for GR-12SH+HoT
2 x	Futaba Female 40 cm extension
2 x	Cable silicona female batt. receptor 30 cm (Futaba)
1 x	ABS angle 4,0x4,0x1000 mm
1 x	Extension silicon 30 cm female (Graupner)
2 x	Extension PVC 150 cm (Graupner)
1 x	Streamline Stainless Steel Tubing 6.3x3.5x1000 mm
1 x	ABS angle 10,0x10,0x1000 mm
1 x	L-Connector 1.0 mm x 1000 mm
1 x	Futaba Female 40 cm extension
1 x	ABS angle 1.5x1.5x1000 mm
1 x	ABS angle 6,0x6,0x1000 mm
1 x	Premium servo extension 25cm
1 x	ABS "T" angle 6.0x6.0x1000 mm
1 x	Streamline Stainless Steel Tubing 10.5x5.7x1000 m
1 x	ABS "T" angle 2.0x2.0x1000 mm
1 x	Extension 100 cm (Futaba)
1 x	Extension 30 cm (Futaba)
1 x	Brass hexagonal rod Ø 4 mm x 1000 mm
1 x	Monokote ROJO misil (1.8x0.65m)
1 x	Oracover White 2 m
1 x	Steel tube (L 1000 mm Ø9 mm, Ø8,7 mm)
1 x	M3 black washers (4 pcs)
1 x	Socket Head Screw M2x5
3 x	Walnut wood slat 1.5x1.5x1000 mm
1 x	Quicklock washer 4 mm (10 pcs)
1 x	Aluminium wide washer M4 Gold (4 pcs)
2 x	BALSA trip 4.0x4.0x1000 mm
1 x	Soporte filtro FESTO (4 pcs)
1 x	Recessed MPX connector support (6 pcs)
1 x	Birch plywood plate 600x300x1.2 mm
1 x	Balsa panel 8.0x100x1000 mm
1 x	Tapa estado carga XT-60 (6 pcs)
1 x	Support FUEL DOT V3
1 x	Birch plywood plate 600x300x4.0 mm
1 x	Birch plywood plate 600x300x3.0 mm
1 x	A/C quality beech plywood 600x300x0.8 mm
1 x	Mahogany wood slat 3.0x3.0x1000 mm
1 x	Liston HAYA 3 x 10 x 1000 mm
1 x	quality beech plywood BIRCH 600x300x2.0 mm
1 x	Beech dowels 3.0 x 1000 mm
1 x	A/C quality beech plywood 600x300x0.6 mm
1 x	Cabel "Y" 30 cm (graupner)
1 x	silicon 100 cm Futaba Extension Ø 0,35 mm
1 x	Profile ABS Square 1 x 1000 mm
1 x	Streamline Stainless Steel Tubing 14.5x9.6x1000 mm
1 x	ABS "T" angle 4.0x4.0x1000 mm
1 x	13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	Ring 320 mm length (5 pcs)
1 x	10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	SE Ring 200 mm (2 pcs)
1 x	SE Ring 400 mm (2 pcs)
1 x	14x60 mm Mini rings Tie Wraps (4 pcs)
1 x	BALSA trip 6.0x6.0x1000 mm
1 x	Pine wood slat 3.0x10.0x1000 mm
1 x	Spring lock washer 3.1 mm (20 pcs)
1 x	Extension S-Bus 1-2 silicon 30 cm FUTABA
1 x	BALSA trip 5.0x5.0x1000 mm
1 x	Extension silicon 50 cm (Graupner)
1 x	Extension silicon 100 cm (Futaba)
1 x	Cabel "Y" 30 cm (Futaba)
2 x	Extension silicon 35 cm (Futaba)
1 x	PIT (Aero-Naut)
1 x	Crimping sleeves for 1.1 mm cable (10 pcs)
1 x	Ball link Aluminio M4 x 4 x 6 x 26mm (4 uds)
1 x	Couple M4 for wire (10 pcs)
1 x	Kwik link AL M2,5 L:23 mm (2 pcs) + Pin Ø 1,6 mm
1 x	Ball link Aluminio M3 x 3 x 5 x 18mm (6 uds)
1 x	Ball Link ALU M3 - RH (1 pcs)
1 x	Clevis plastico I=44 mm / hole 3mm / pin 2 (2 pcs)
1 x	Aluminium coupler M3/2 with ball bearing (1 pcs)
1 x	Aluminium coupler M2/2 with ball bearing (1 pcs)
1 x	Threaded coupler M2,5 Ø 2 mm (10 pcs)
1 x	Ball link duraluminium M3 V1 (10 pcs)
1 x	Threaded coupler ALU M2 Ø 4 (2 uds)
1 x	Pilatus PC-21 50E RED/WHITE (SebArt)
1 x	Extension silicon 50 cm (Futaba)
1 x	Extension silicon 75 cm (Futaba)
1 x	ABS rectangular profile 12x6.0x1000 mm
1 x	Prolongador S-Bus JR/JR 20cm
1 x	Extension silicon 25 cm (Graupner)
1 x	Profile ABS half cane 5.0x1000 mm

1,745.79EUR