351.00EUR

Turbo Timber Evolution 1.5m BNF
[EFL105250]


Product Details

The E-flite® Turbo Timber® Evolution 1.5m is the most convenient, capable, and durable version of the popular STOL-capable model yet. Upgrades including a top-mounted hatch, stronger gear mounts, Smart electronics and more make it better than ever!
Key Features
The best “next step”, everyday sport and STOL capable model for a wide range of pilots
More convenient top hatch with larger battery compartment to fit 3S 2200mAh to 4S 5000mAh batteries
Combined connectors make installing/removing the wing easier for more convenient storage and transport
Stronger, reinforced mounts plus shock-absorbing landing gear and oversized wheels/tires
Includes optional-use floats with steerable rudders for flying from water

In The Box
(1) E-flite® Turbo Timber® Evolution 1.5m
(1) Spektrum™ Avian™ 60A Brushless Smart ESC (installed)
(1) Brushless Outrunner Motor (installed)
(1) Spektrum AR637TA 6-Channel Receiver (installed)
(6) Metal-Geared Servos (installed)
(1) Set of Optional-Use Leading Edge Slats
(1) Set of Optional-Use Floats
(1) Product Manual

Needed to Complete
(1) Transmitter
(1) 3S 11.1V or 4S 14.8V 2200–5000mAh LiPo with EC3™ or IC3® Connector
(1) Compatible LiPo Charger
(1) LiPo Safe Charging Bag

Evolution Of A Legend
Many RC pilots got their first taste of flying a Short Take Off and Landing (STOL) capable airplane with the original E-flite® Timber® 1.5m model. Its friendly handling, nimble sport performance, and takeoff-and-land-almost-anywhere abilities made it one of the most popular RC aircraft of all time — widely acclaimed and highly recommended as a great "next step" after a trainer, as the perfect first STOL-capable aircraft, and as one of the best all-around, fun-to-fly sport models for a wide range of pilots. Its next evolution, the Turbo Timber® 1.5m, proved even more popular than the original with the addition of metal-geared servos, a 3S and 4S compatible power system, plus a turboprop-styled nose and 3-blade propeller. Now comes the Turbo Timber® Evolution 1.5m, ready to continue the Timber legend with new upgrades that deliver more durability, convenience, and capabilities than ever before — plus a fresh and modern look!

Features
Evolved with updates and upgrades including Smart electronics to offer new capabilities and telemetry features, added convenience, more durability, plus a fresh and modern look
The best "next step", everyday sport and STOL capable model for a wide range of pilots
Incredible Short Takeoff and Landing (STOL) plus sport and aerobatic flight capabilities
60-amp Spektrum™ Avian™ Smart ESC provides real-time battery voltage, current, motor RPM and other data, plus reversing capabilities, via compatible receivers and transmitters
High-power 3S and 4S compatible outrunner motor with 3-blade prop for proven performance
More convenient top hatch with larger battery compartment to fit 3S 2200mAh to 4S 5000mAh batteries
Combined connectors make installing/removing the wing easier for more convenient storage and transport
Stronger, reinforced mounts plus shock-absorbing landing gear and oversized wheels/tires
Optional-use leading edge slats for improved STOL and slow flight performance
Functional and factory-installed LED landing, navigation and strobe lights
Includes optional-use floats with steerable rudders for flying from water
Stiffened wing for improved aileron authority, roll rates and handling
Lightweight yet durable composite-reinforced EPO construction
Six durable, factory-installed metal-geared servos and linkages
Functional slotted flaps for shorter takeoffs and landings
Bolt-on, two-piece wing with carbon fiber wing joiner
Fast and easy assembly – no glue required
Smarter, Stronger, And More Capable
The E-flite® Turbo Timber® Evolution 1.5m has been evolved into the Smartest, most convenient, capable, and durable Timber yet! Popular features from the original Timber are all there: the shock-absorbing landing gear with oversized, tundra-style wheels; optional-use float set and leading edge slats; functional slotted flaps; and an LED lighting system with landing, navigation and strobe lights. So are the enhancements that gave the Turbo Timber® more performance and capabilities, including a turboprop-styled nose, 3-blade prop and spinner, a more powerful 3S and 4S compatible power system, and a stiffer wing with durable, reliable metal-geared servos. Now the Turbo Timber Evolution 1.5m adds a new top hatch for faster, easier battery changes, plus combined connectors for simpler wing installation and removal. Strengthened landing gear mounts improve the model's durability and STOL capability when flying from rough terrain. The proven Turbo Timber power system is upgraded with an exclusive Spektrum™ Avian™ 60-amp Smart ESC, and the BNF® Basic version is equipped with an AR637TA receiver to provide full-range, real-time telemetry data including battery voltage, current, motor RPM and more — plus motor reversing for special ground handling and other capabilities — along with the benefits of AS3X® and optional-use SAFE® Select technologies. There's even a fresh, modern trim scheme for the durable, composite-reinforced airframe! The Turbo Timber Evolution 1.5m remains the best "next step", everyday sport and STOL-capable model for a wide range of pilots — only it's now better than ever!

Smart Technology
Both the PNP and BNF® Basic versions of the Turbo Timber® Evolution 1.5m are equipped with an exclusive Spektrum™ Avian™ 60-Amp Smart ESC that can provide a variety of real-time power system related telemetry data including motor RPM, current, battery voltage and more via compatible Smart receivers (such as the AR637TA installed in the BNF Basic version) and Spektrum AirWare™ equipped transmitters (including the DX6e and 8e, DX6 G2/G3 and 8 G2, the DX9, NX6, 8 and 10, the iX12, iX20 and others) while you fly. It also features optional-use motor reversing to offer special ground handling and other capabilities.

Versatile Gear Options
Thick grass, gravel paths, dirt trails — even local lakes and ponds — you can fly from these and many other surfaces that are impossible for most models of this size to handle. The stronger, reinforced mounts in the fuselage, plus shock-absorbing landing gear equipped with oversized, tundra-style wheels and tires, soaks up the bumps of rough surfaces and provides excellent prop clearance. The included float set features dual water rudders for superb steering control. Whichever gear option you choose to fly with, both are easy to install and can be swapped out in minutes.

STOL (Short Takeoff and Landing) Capable
The Turbo Timber® Evolution's wing is designed with features like drooped wingtips and functional slotted flaps, and accepts optional-use leading edge slats (included) for improved slow flight and STOL performance. These features, along with the lightweight design and high-power brushless motor, make it possible to spring into the air or float down to land in as little as two feet or less.

Versatile Power
The factory-installed brushless power system features a Spektrum™ Avian™ 60-amp Smart ESC along with a specially-tuned motor and 3-blade prop that deliver an abundance of thrust with a 3S LiPo battery, or more power and unlimited vertical performance with a 4S battery without the need for any modifications or upgrades. Plus, the more convenient top hatch and larger battery compartment makes it easier to fit batteries from 3S 2200mAh to 4S 5000mAh to achieve a wide variety of performance and flight times.

Versatile Durability
Composite-reinforced, hollow-core construction with EPO material delivers a lightweight yet durable airframe. The Turbo Timber® Evolution 1.5m also features a stiffened wing that improves aileron authority and roll rates, plus it's equipped with durable and reliable metal-geared servos all around.

LED Lights
Like the original, the Turbo Timber® Evolution 1.5m comes with realistic-looking LED landing, navigation and strobe lights that are factory-installed and powered from the flight battery.

Easy Assembly
No glue is required for assembly, and because the few parts that need to be assembled easily bolt into place, the Turbo Timber® Evolution 1.5m can be ready to fly in less time than it takes to charge the flight battery. The two-piece wing, now featuring combined servo and LED connectors, also makes transport and storage more convenient than ever before.

Plug-N-Play® Completion Level
This Plug-N-Play (PNP) model comes out of the box with a factory-installed power system and servos that are ready to connect to the compatible receiver of your choice (sold separately). Simply install the receiver, finish any final assembly, and fly!

Product Specifications:
Airfoil Shape Semi-symmetrical
Approximate Assembly Time Less than 1 hour
Battery Sold Separately
Battery Type LiPo (3.7V per cell)
CG (Center of Gravity) 2.4" (60mm) +/- 0.20" (5mm) from leading edge of wing measured at fuselage
Charger Sold Separately
Completion Level Plug-N-Play
Flaps Yes
Power Type Electric
Landing Gear 2pc sprung main landing gear with steerable tailwheel
Material EPO
Minimum Required Radio 6-channel
Motor Size 10 size, 800Kv
Motor Type Brushless
Product Length 40.9" (1039 mm)
Product Weight 54 - 60oz (1.53 - 1.7kg)
Propeller Size 11x7.5 3-blade
Radio Sold Separately
Receiver Sold Separately
Servos Included
Skill Level Level 3
Speed Control Included
Wing Area 559.5 sq in (36.1 sq dm)
Wingspan 61" (1549 mm)


Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
3 x Bags de Luxe ULTIMATUM 2.0
3 x Motor A2212/13T
2 x VBar NEO
1 x 
1 x Oracover Green10 m
1 x Long pinned hinge (12 uds)
2 x 1/7 Pilot "Japanese"
1 x Connector Sub-D 2+5 Male
1 x Cable grommet Ø 3.2 mm (4 uds)
1 x Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm)
1 x Cable grommet Ø 6.4 mm (4 uds)
1 x Cabling for Fox MDM1 wings
2 x Big-Malibu XL Roof box with surfboard rack GREY
2 x Civilian pilot "Gramps" size 9cm (Slimline)
2 x Cable grommet Ø 5 mm (4 uds)
2 x Digital weight, angle and balance meter BASIC
2 x Transmitter SPEKTRUM DX-9 (Only TX)
1 x 
1 x ABS tube 5.0x4.0x156 mm
3 x Initior Receiver FRX2 Wireless
2 x 1/10 Pilot "Jimmy"
1 x Canopy Lock V1 M3 Red (2 pcs)
1 x MG cannon 1.8 cm (5 pcs)
1 x ABS tube 2.0x1.0x1000 mm
1 x Motor holder for AC 28/7
3 x Motor Typhoon 6/20
2 x 48 mm cylidric hinge Ø 2,5 mm (5 pcs)
1 x Rangefinder 39x20 mm (2 pcs)
1 x Ring 320 mm length (5 pcs)
1 x Pin type hinge Al 4,5x70 mm (2 pcs)
1 x Militarian pilot "Kamikaze" size 9cm (Slimline)
2 x Black copper lacquer wire Ø0,2 mm (5 m)
2 x ABS tube 18.0x16.0x1000 mm
1 x Copper lacquer wire Ø0,2 mm (5 m)
1 x Circlick securite
1 x Fresa corte diamante Ø 2.3mm (bola)
2 x White smoke canister 140 g
1 x Field folding model stand SebArt
3 x 48 x 10 mm cylidric hinge Ø 3,0 mm (10 pcs)
2 x Black smoke bombs AX-60 (5 pcs)
2 x Swashplate metal LAMA
1 x White smoke bombs AX-60 (5 pcs)
2 x Flybar support metal LAMA
2 x PROFI TX fastening rings
1 x 
1 x Tray JETI for DS-14/16/24 Black
1 x 67 mm cylidric hinge Ø 5 mm (4 pcs)
1 x Crystal TX 35.050 Ch 65
2 x Crystal RX 35.120 Ch 72
2 x Crystal TX 35.180 Ch 78
1 x Crystal TX 35.100 Ch 70
3 x Crystal TX 35.010 Ch 61
2 x Crystal TX 35.150 Ch 75
3 x Cooler motor type 280
1 x Copier 5x20 cm pcs
1 x Crystal Universal RX 35.030 Ch 63
1 x Mig-25 "FOXBAT" (RBC Kits)
2 x SERVO DES 588 BB MG
1 x Antenna holder bracket double
1 x 3 LiPo XH>EH adapter
1 x Shirt Hispano Aviación
1 x 11 mm Rubber pads (14 pcs)
1 x Blade holder metal LAMA
1 x Civilian pilot "Pamela" size 9cm (Slimline)
2 x Wing-connector: Glass / Carbon tube (26.5/25 x 25/23) x 1000 mm
1 x Carbon tube (L 1000 mm, Ø2 mm, Ø1 mm)
2 x 1/10 Pilot "Jack"
1 x Coversion set HIROBO EX/EAGLE elektro
1 x ABS tube 3.0x2.0x330 mm
1 x EWC3 40 cm wing connector
1 x Magnetic Interruptor MULTIPLEX
1 x Micro screw-lock pushrod conn snap Ø 1 mm (2 uds)
1 x Switch Cap L (silver)
1 x Carbon tube 3K-PW (L 1000 mm, Ø8 mm, Ø6 mm)
2 x 25 mm reinforced hinge
2 x 1/12 Pilot "Langley"
3 x Carbon blade 230 mm
1 x 41x5,5 mm wires output (2 pcs)
2 x Interruptor SAFET-SWITCH 12HV Twinbatt
1 x FUTABA T10 J T-FHSS
1 x Charger FUTABA SQN30W12P-08 220v
3 x Initior Transmitter FTX2 Wireless
1 x Switch moment button, 2 functions, long FUTABA
1 x Futaba S-Bus Rx/Gyro Link Lead
1 x 3,0x60 mm allen screwdriver
1 x Steering arm 12 mm Ø 3 mm (2 uds)
1 x Carbon blade 3D 230 mm
2 x Carbon/kevlar tube 3K-PW (L 1500 mm, Ø25 mm, Ø22.5 mm)
2 x White smoke bombs AX-9 (10 pcs)
1 x SIMtransmitter 6 Mode 2
1 x Motor Typhoon 700-68 1680 Kv
1 x Large flex hinge (12 uds)
1 x 1/6 Pilot "Buddy"
1 x Steering arm 16 mm Ø 3 mm (2 uds)
1 x Male/Female prolonguer for Balancer Thunder Power 6S
1 x F-104 Starfighter Y/B Aniversary(SebArt)
1 x 3 mm Prop Adapter M6
1 x 1/12 Pilot "Fighter"
2 x Stainless steel cable Ø 0.52 mm - 15 kp (10 m)
1 x MAULE M-7-420 2.8m Red
1 x KIRA 600-24 6,7:1
1 x Stainless steel cable Ø 0.88 mm - 60 kp (10 m)
4 x Tow hook for tug
1 x Long pinned hinge (6 uds)
1 x 10 mm gas motor standoff
1 x 2 mm Prop Adapter M6
1 x "Taxi Tank" Fuel Tank
1 x Mini AVANTI S EDF 80MM RTF
2 x 1/4 Pilot "Mike"
1 x Prop Shaft Adapter 6 mm/M8 "long" 35 mm
1 x Pilot "Adolf" Legends Series (Slimline)
2 x Battery LiPo GENS 8500 mAh 2S 7.6V HV 120C
1 x Micro Crystal RX 35.170 Ch 77
1 x 20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x 90 mm rods + T patellas set for direction control
1 x SUS wire 3m (nylon coated)
1 x Program 5v SIO RS 232
1 x Nylon hinge for flaps/gates 27x10,5 (2 pcs)
1 x ABS tube 10.0x8.0x1000 mm
1 x 120x60 mm C SLH KOVO wheel
1 x 3.2 mm Prop Adapter M8
1 x Plastic caps for AIR BURTS (30 pcs)
1 x Long Switch On/Off micro
1 x AXI 2808/20 V2 Long
1 x Propeller MENZ-S 18x12
1 x XH/XH 30 cm Female extension 0,25 mm2 silicone cable for 4 cell
1 x DRIVE 550 (KIRA 500-26 6,7:1 + KOBY 55 LV)
1 x Connector Sub-D 2+5 Female
2 x PYRO 750-50L Competition
3 x Fixed launching hook
1 x Blue smoke canister 140 g
1 x Crimping sleeves for cable 0.70 mm (10 pcs)
1 x Propeller MENZ-S 20x10 3 blades
1 x AXI 2820/12 V2
2 x 1/6 Pilot "Cindy"
1 x Piloto Jet "Red" 1/6 Scale
1 x Propeller diller for EME35 and DLE35
1 x Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH
1 x 60 mm long Prop hub for ZG45SL, ZG62/S/SL and ZG80B
1 x 3 copper lacquer wire Ø0,2 mm (1 m)
3 x 
1 x Futaba Neckstrap
1 x 67 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
1 x F-104 Starfighter USAF (SebArt)
1 x Kontronik Kosmik 30 cm Cable Kit
1 x 13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x Canopy Lock V1 M3 Blue (2 pcs)
1 x Stainless steel cable Ø 0.62 mm (10 m)
2 x Propeller MENZ-S 19x10
1 x Spinner Alumin. propeller pleg. 30 mm / 3,2 mm
2 x PYRO 600-11
1 x Antena FUTABA receptor Standard 2.4 GHz ( 200 mm aprox.)
1 x 500 ccm complete gasoline fuel tank
1 x TA-183 "HUCKEBEIN" (RBC Kits)
1 x 6 mm Prop Adapter M8
1 x Extension Arm for Carburetor (red)
1 x KIRA 500-30 6,7:1
1 x Blue smoke canister 100 g
1 x Propeller MEJLIK 30x12
1 x Antenna Hole Cap V1 (Silver)
1 x AXI 2808/24 V2
1 x 3,2 mm Prop Adapter M6
1 x DUPLEX 2.4EX Expander E2
2 x AXI 2826/12 V2
1 x Propeller diller for DA50, DLE55 red
1 x Propeller diller for DLE170
1 x DPSI Ampere battery backer
1 x KIRA 500-36 6,7:1
1 x MIG 29 3D RTF Red Start SET + Gyro
1 x 290 mm M5 Prop shaft
1 x Servo holder for retract
1 x 4 mm Prop Adapter M8
1 x 
1 x Parachute expulsion foam
1 x Suport PITOT
1 x ABS angle 1.5x1.5x1000 mm
1 x KIRA 600-20
1 x "Y" charging 4mm wire (2 IN-1 OUT).
1 x Connector CAN 15
1 x Towing hook <3m
1 x MXS-C (Mini) Blue
1 x Propeller MENZ-S 18x10
1 x KIRA 480-31 5,2:1
1 x Crystal RX 35.250 Ch 285
1 x 1000 cc gasoline fuel tank complet
1 x Dia. 16x35 mm PTFE tube for escape
1 x Servo DITEX TD2612S
1 x Electric spoiler 250 mm (2 pcs)
1 x Exhaust gasket DA-60/120
1 x Propeller MEJLIK 20x13 N-3 Blades
1 x Cable grommet Ø 4 mm (4 uds)
1 x 1/12 Pilot "Tom"
1 x 40,0 mm hydro-propeller (left hydropropeller)
1 x CC 03
1 x Battery LiPo GENS 4000 mAh 6S 22.2v 25C (Gens Ace)
1 x Pilot "Dick" Legends Series (Slimline)
1 x KIRA 500-26 6,7:1
1 x Pin type hinge Al 4,5x70 mm to wire (2 pcs)
2 x DA 85 / DA 100 / DA 100 L carburetor
1 x Mixers smoke bombs AX-60 (5 pcs)
1 x AXI 2217/16 V2
1 x TARANIS Q X7
1 x Walbro carburetor for MVVS 26/30/35/40 cc
1 x Aluminium ignition bad (red)
1 x Softshell Hispano Aviación
1 x 1/6 Pilot "Garry"
1 x Beryll carbon wing joinner
1 x Sparkplug NGK CM6
1 x Canopy Latch
1 x DUPLEX 2.4EX MU 3 Sensor
1 x 18m Fitting barb
1 x Roller cutter 28 mm
1 x PYRO 600-12
1 x Screw-lock pushrod conn snap Ø 1.5 mm (2 uds)
2 x COPILOT Multiplex
1 x Propeller APC 11x7 Electric
1 x Smoke set "M"
1 x Compact on-board starting system (9715)
1 x Fast'n EZ-CA-Hinge (12 uds)
1 x Receiver FUTABA R6004 FF FAST
1 x 1/12 Pilot "Cougar"
1 x Handle for PERMAGRIT lime
1 x ABS angle 10,0x10,0x1000 mm
1 x Threaded coupler ALU M2,5 Ø 3 (2 uds)
1 x Futaba Multi-Switch-Prop 12+2 DECODER
1 x AXI 2820/10 V2
1 x Glases Nimbus
1 x Cylidric hinge 33 mm Ø 2 mm (5 pcs)
1 x ABS tube 7.0x5.0x1000 mm
1 x Red smoke canister 65 g
1 x Charger HITEC CG-42 TX 7.2v/ RX 4.8v (80 mA)
1 x Small aluminium horn red (2pcs)
1 x AXI 2814/16 V2
1 x Battery LiPo GENS 5300 mAh 2S 7.4V 30C (Gens Ace)
1 x KIRA 480-43 5,2:1
1 x Aluminium tube (L 1000 mm, Ø4.0 mm, Ø3.1 mm)
1 x Aluminium tube (L 1000 mm, Ø3.0 mm, Ø2.1 mm)
2 x Charger 220/110v
1 x 100g Flux Paste for Silver Solder
1 x ABS tube 6.0x5.0x1000 mm
1 x Steering arm 16 mm Ø 3 mm
1 x MPX 8 pins plug mold
1 x AXI 2814/6D V2
1 x Shaft KPG25 4,2:1
1 x AXI 2814/20 V2 Long
1 x Extension for LC-Display 50cm
1 x F-35C (RBC Kits)
1 x Micro Crystal RX 35.070 Ch 67
1 x Female connector for 16 pines AWG
1 x Micro Crystal RX 35.160 Ch 76
1 x Glases Flitemaster
1 x Futaba Multi-Switch-Prop 12+2 MODUL
2 x Battery LiPo GENS 2500 mAh 2S 7.4v 25C (Gens Ace)
1 x 160 mm carbon undercarriage (2pcs)
1 x Exhaust gasket for ZG20/ZG22/ZG23/ZG231 ZG26/G2D96-D/G230RC/G260
1 x Telemetry interface ALTIS 20 cm
1 x Shaft sleeve LAMA
1 x Propeller RABOESCH M4 50 mm (3 Blades pr) (Right hydropropeller)
1 x Streamline Stainless Steel Tubing 10.5x5.7x1000 m
1 x Stainless steel cable Ø 0.5 mm (10 m)
1 x 3-blades 28x12 carbon prop Super Silence
2 x 55% silver electrodes (2 pcs)
1 x MAMBO 17
1 x PYRO 650-103 Long Axi
1 x Piloto Jet "Green" 1/6 Scale
1 x Tygon tube 9.53 x 6.35 mm 15 m
1 x PowerBox Cockpit SRS (incl. SensorSwitch)
2 x Propeller balancer
1 x Battery LiPo GENS 450 mAh 2S 7.4V 25C (Gens Ace)
1 x Transmitter COCKPIT SX 12 M-Link (only Tx)
2 x Battery LiPo GENS 5000 mAh 2S 7.4V 50C (Gens Ace Hard Case)
2 x Receiver R7008HV comatible FUTABA
1 x PowerBox PowerExpander SRS
2 x Prolongador S-Bus JR/JR 10cm
1 x ABS tube 8.0x7.0x1000 mm
1 x 102x26 Ø6.0 mm aluminium core wheel
1 x Fiat G-91 Frecce Tricolori RTF Set
2 x PYRO 700-56L
1 x Battery LiPo GENS 3700 mAh 6S 22.2v 60C (Gens Ace)
1 x Threaded coupler ALU M3 Ø 6 (2 uds)
1 x A/C quality beech plywood BIRCH 600x300x1.0 mm
2 x Arnes cruzado Confort de Luxe PROFI
1 x ZENOAH ZG26 SCM Marine Engine
1 x Extinguisher CO2 - 2 Kg
1 x F9F Panther (Aero-naut)
1 x Propeller MENZ-S 15x6
1 x XT-60 Plug Mold
1 x Pilatus PC-21, White cabine (SebArt)
1 x 110x55 mm C SLH KOVO wheel
1 x KIRA 480-38 5,2:1
1 x M2,5 Diam metal ball link V3 (2 pcs)
1 x HITEC 17 mm servo arm with ball link HITEC
1 x Battery LiPo GENS 450 mAh 3S 11.1V 25C (Gens Ace)
1 x Long ball link M2 (6 uds)
1 x Interruptor On/Off Corto micro
1 x Cylinder gasket per 1 for ZG 74B/ZG 80B
1 x 80 mm rods set for direction control
1 x GPS V2 Sensor for M-LINK receivers
1 x Crystal RX 35.020 Ch 62
1 x PH5 adapter for 5mm M8 axi for AXI2820 y 2826
1 x KONDOR 15-92
2 x 3.2 mm Prop Adapter M6
1 x Strip ABS 2.0x8.0x1000 mm
1 x 30x14 prop Super Silence
1 x 27x10 prop Super Silence
2 x Wing-connector: Glass / Carbon tube (13.7/12.5) x 1000 mm
1 x Steering arm 16 mm Ø 4 mm (2 uds)
1 x Propeller diller for DLE111 and DA85-150
1 x Adjustable launching hook
1 x AXI 2212/12 V2
1 x Fixing Ring with Base 60 mm
1 x 2,3 mm Prop Adapter M6
1 x Double side nipple
1 x Mini AVANTI S EDF 80MM RTF Combo Lipos 5000-6s (SebART)
1 x Straightened threaded rod M3 - 1m
1 x ABS Strip 1.0x4.0x1000 mm
1 x ENIGMA ARF
1 x ABS Strip 1.5x3.0x1000 mm
1 x Extension 5 lipos JST/C
1 x LH long black aluminium horn L31xH30 (2pcs)
1 x Avia (Top Model)
1 x Epoxy QUIK-CURE™ 5 min (260g)
1 x Servo FUTABA S 3072 HV S-Bus
3 x KIRA 480-26 5,2:1
1 x Actuator Electric 25 mm
1 x KIRA 480-43
1 x Flip ARF (Top Model)
1 x Futaba FX36 2.4GHz FASST Test + R7008SB
1 x Propeller MENZ-S 21x8
1 x AXI 2217/20 V2
1 x Battery LiPo TATTU 4500 mAh 6S 22.2V 25C
1 x Esc KOSMIK 200+ HV
1 x PowerBox Evo
1 x Ferrita 27x14x7 mm
1 x Legs + electric brakes for Viper Jet 90
1 x 3-blades 30x12 carbon prop Super Silence
1 x Servo arm with 6 mm hole to FEMA 9800A
2 x Prop washer for DA-85, DA-100, DA-100L, DA-120
1 x F-20 Tigershark (RBC Kits)
1 x Motor Set CHALLENGER Indoor
1 x White smoke canister 100 g
1 x Micro Switch button
1 x HPP-21 PLUS PC Programmer for Hitec Digital Servos
1 x Propeller APC 11x4.7 SF
1 x Filter KingTech
1 x Ion Pro, Fuselage (JP Model)
1 x TrainerCord (master-learner)
2 x Extension S-Bus 1-2 silicon 30 cm FUTABA
1 x DUPLEX 2.4 EX MVario2
1 x T-shape holder metal LAMA
1 x Fixing Ring with Base 40 mm
1 x Battery LiPo GENS 5000 mAh 12S 44.4v 45C (Gens Ace)
1 x Sealing Iron Sleeve STD
1 x Gasket, cylinder base for motor DA 50
1 x A/C quality beech plywood 1520x750x3.0 mm
1 x Futaba Radio Case
1 x Cooler motor type 300
1 x Fresa corte diamante Ø 2.35mm (flame)
1 x Battery LiPo GENS 5000 mAh 4S 14.8v 45C (Gens Ace)
1 x Horn 5/20 with M2 Bearing
1 x LA500 nose
1 x Extension silicon 30 cm female (Graupner)
1 x Propeller APC 12x3.8 SF
1 x Red copper lacquer wire Ø0,2 mm (5 m)
1 x KIRA 480-38
1 x wing/fuselage connector for 3 pines AWG 20-24
1 x Sukhoi 29S 2,6 m White/Blue (SebART)
1 x Battery LiPo GENS 5000 mAh 4S 14,8V 40C (Gens Ace Hard Case)
1 x Pins M connect Multipin connectors AWG 20-24
1 x 23x10 BIELA propeller
1 x Propadapter for motor A50
2 x DLE 55 carburetor
1 x Heat-conducting adhesive (2x2ml), WLK DK 4
1 x Servo safety connector (10 pcs)
1 x PCARD Wireless System
1 x 120x60 mm SLH KOVO wheel
1 x Adapter rotula M3
1 x Tube Pitot to PIXHAWK
1 x Cannon 53/6 mm
1 x Oracover Yellow CADMIO 10 m
1 x Short ball link M3 (6 uds)
1 x Suction funnel for carburetor WALBRO 20-80cc (blue)
1 x Carbon fiber rod 10 mm x 1000 mm
1 x Extension silicon 50 cm (Graupner)
1 x Baal link 4/14/4 (5 pcs)
1 x AXI 2814/20 V2
1 x OBECHI sheet 2.0x3.0x1000 mm
2 x Suction funnel for carburetor 90D-M (red)
1 x Propeller APC 12x8 Electric
2 x KIRA 600-20 6,7:1
1 x Propeller MEJLIK 20x8 CFK
1 x Motor Typhoon 2W-20
1 x Spinner fixed propeller 60 mm / 5,0 mm
1 x TP/TopFuel - XH 2/3S Adapter
2 x Crystal RX 35.010 Ch 61
1 x Surprise XII Rudder (Freudenthaler)
1 x USB HLS prog. interface
1 x BU 131 Jugmann Panel Instrum. frontal
1 x Ball link M2,5 (10 pcs)
1 x Nylon hinge 15x0,3 (10 pcs)
1 x M3 Maxi ball link (2 uds)
1 x Micro flex hinge (12 uds)
1 x Gearbox KPG27/28 4,7:1pinion
1 x Yellow smoke canister 100 g
1 x 4 mm Prop Adapter CN-Spinner
1 x Pine wood slat 10x10x1000 mm
1 x Electric Landing Gear BULL Mo1 2.6 (Elektron Retracts)
1 x ABS tube 5.0x3.0x1000 mm
2 x TX 250 mW especial GOPRO
1 x SSPS105 Super Hi-Power servo
1 x Cargador para AA/AAA Ni-MH & Ni-Cd
1 x Round Rod 1,5x1000 mm
1 x AXI 2814/12 V2 Long
1 x Propeller MENZ-S 18x8 3-Blades
1 x Race 650 Johnson motor 7.2v
1 x Canopy Astra
1 x DUPLEX MUI 30 Sensor
1 x Crimping tool
1 x ZG231cc SHL
1 x Extension silicon 75 cm (Futaba)
1 x Extension 6 lipos XH > EH
1 x AXI 2826/6 V2 Long
2 x Extension silicon 10 cm (Graupner)
1 x Horn 6/27 with M3 Bearing
1 x Suction funnel for carburetor 90D-L (red)
1 x Pipa 3D BULL MØ1 2.600mm
1 x Short adjustable control horn 3x24
1 x Propeller MEJLIK 32x12 EVO
1 x Remote electric ignition system
1 x PT 21x13 EL Propeller 3 Blade
1 x Swicht F14/FC-16 (3 pos)
1 x FUTABA 20 mm servo arm with ball link
1 x Chopped glass fibre strands 3 mm
1 x Receiver FUTABA R7108SB FASSTest/FASST
1 x Crystal Universal RX 35.040 Ch 64
1 x Cilinder joint for G230RC/G260RC
1 x Straightened rod Ø 2.5 mm x 1000 mm
1 x FESTO connector 1/8 Quick 6mm 90º
1 x Sandpaper file 13 mm
1 x Indoor Brushed motor kit
1 x Bags BULL Mo1 2.6m "Luxe"
1 x Horn for flap control (1 pcs)
1 x ZENOAH/ZG 20cc
1 x Crystal Universal RX 35.150 Ch 75
1 x Red smoke bombs AX-60 (5 pcs)
1 x AXI 2814/16 V2 Long
1 x DA-50 Carburator
1 x Stainless Steel Bend D 15x0,4mm
1 x ZENOAH ZG 62 SL
1 x MythoS 125E WHITE/BLUE (SebART)
1 x A/C quality beech plywood 600x300x0.8 mm
1 x 12V Car Adapter
1 x XPower H PROP HUB Ø5.0/20mm +2,5°
1 x Nose leg 155 mm with wheels 70 mm
1 x DC Small for MultiLog & UltraLight
1 x servo adapter lead, JST-SH socket - JR male Pin, for GR-12SH+HoT
1 x CRACK YAK (Mini) 600 mm
1 x Ventral support for AX-18/AX-60
1 x Propeller diller for DLE30/DLE35RA/DLE40/DLE55/DLE61/EME 55/DA-5
1 x Micro clevis 0.8 mm(10 uds)
1 x Oracover Yellow CUB 2 m
1 x Aero-Master (Aero-naut)
1 x resin-hardener L-385 H-385 (1250 g)
1 x Battery LiPo TATTU 1550 mAh 3S 11,1V 75C
1 x SBEC 30 D
1 x Walnut wood slat 2.0x2.0x1000 mm
1 x Battery LiPo TATTU 1800 mAh 4S 14.8V 75C
1 x Sparkplug DLE CM6
1 x Strip ABS 2.0x5.0x1000 mm
1 x Futaba SBS-02A Air Pressure Telemetry Sensor (FASSTest/T-FHSS)
1 x KIRA 480-34 5,2:1
1 x Soporte metal para servos
1 x VASA 55 w/Tyhpoon 240-15 4800kv
1 x Propeller APC 10x5.5 MR Electric multirrotor PUSHER
1 x Insulator ZG 20
1 x Avia spare blue cockpit (Top Model)
1 x RX TARANIS V8FR-II HV 2.4 GHz
1 x Streamline Stainless Steel Tubing 11.5x6.5x1000 m
1 x Futaba BLS255/272/471SV - Gear Set
1 x Sebart 50E YELLOW/BLACK (SebART)
1 x 24x12 prop Super Silence
1 x Receiver RSF08SB comatible FUTABA
1 x Threaded coupler ALU Left M2,5 Ø 4 (2 uds)
1 x PYRO 700-45
1 x Pilatus PC-21 50E YELLOW/BLACK (SebArt)
1 x KIRA 400-27
1 x Propeller MEJLIK 26x12 N-3 Blades
1 x Hawker Hunter (RBC Kits)
1 x Receiver R6008HV-A comatible FUTABA
1 x EXTREME FLIGHT EXTRA 300-48" (1.22 m) ARF Blue (EXTREME FLIGHT)
1 x F-100 Super Sabre (RBC Kits)
1 x ALBATROS 3.0 m (orange/white)
1 x Brake disc Electron Retracts
2 x Futaba S3010 Servo - Standard BB 0.16s/6.5kg
1 x Battery plate
1 x Propeller APC 10x5 Electric
1 x Digital precision scale up to 2000 g
1 x SPS 70V 140/280 A
1 x KIRA 400-34
1 x Autogyro Cierva C30 Spain
1 x Mini-Pix Esc 15 Amp
1 x ABS Strip 1.5x6.0x1000 mm
1 x AddCAP 10AS capacitors
1 x 22 mm Cut Disc Proxxon/Dremmel
1 x Green smoke canister 140 g
1 x Pitts Mufflers EME 70 cc (2 pcs)
1 x Propeller MEJLIK 24x10 TH
1 x Support hands Issuer PROFI TX
2 x SE Ring 330 mm (4 pcs)
1 x Truck-trailer for gliders 720 x 239 mm
1 x Me-163
1 x Micro Crystal RX 35.090 Ch 69
1 x Universal Filter
1 x Fascination 3600 mm ARC
1 x LA500 Blades
1 x Beech dowels 2.0 x 1000 mm
1 x Transmitter Crystal 35 Mc/s Ch 62
1 x Micro Tarjeta SD Rapid Rush 16 GB
1 x Monoprep (RBC Kits)
1 x 33,0 mm propeller (left propeller)
1 x Propeller MENZ-S 16x6 3-Blades
1 x CAM-Carbon Light Prop 10x4.5" (Prop right)
1 x Steel tube (L 1000 mm Ø10 mm, Ø9,7 mm)
1 x Prop Shaft Adapter 5 mm "long"
1 x KIRA 600-30 6,7:1
1 x Propeller MENZ-S 16x12
1 x T-Motor U7-V2.0 Kv420
1 x Micro Crystal RX 35.890 Ch 189
1 x FUTABA F14 + R168DF + Servo S148
1 x 17x10 BIELA propeller (3-blades)
1 x Futaba 20 mm servo arm
1 x Prop hub for DA-100, DA-100L
1 x JIVE 120+HV Esc
1 x 25 mm Sandpaper file
1 x Electric Landing Gear ULTIMATUM 2.0 (Elektron Retracts)
1 x DUPLEX Satellite receiver Rsat 900
1 x Battery LiPo GENS 6500 mAh 3S 11,1V 60C (Gens Ace)
1 x Carburetor DLE 170
1 x Aramid 50 daN 50 m
1 x Paramotor Trike XL
1 x Aluminium servo arm (2 uds)
1 x Futaba Prop Module F14
1 x Trike XL motor set (motor+esc+prop)
1 x Jet Pipe for A-10 Skymaster (set 2 pcs)
1 x Para-RC Trike "RC-Bullix"
1 x Paramotor BackPack XXS 2
1 x Pitot tube JETI MSpeed DUPLEX
1 x Rescue 1,8m2 / BackPack
1 x Gates hinge aluminium (1 pcs)
1 x Windsock Ozone L - 700 mm
1 x Buy Perforated film 145 cm / 50 m
1 x ASPIRE Red ARF 2.000 mm, Fuselage
1 x Moki Pushrod S250 (1 pcs)
1 x FAN KOSMIK
1 x Opale Rucksack
1 x Actuator Electric 25 mm HIGH TORQUE
1 x QS Bulkhead Valve 6/6 mm
1 x Antena FUTABA 35 mhZ 3PM/3FRF/4V/4Y/6EX/6X/6Y/7C
1 x Ion Pro NG electric with flaps ORANGE (JP Model)
1 x ASPIRE Red ARF 2.000 mm, Canopy
1 x Parachute PV6 for F3J
1 x Mytho S 50E white/red canopy(SebART)
1 x LUCAS pilot ARTF
1 x Set cintas unión paracaídas 145 cm
1 x DC-3 Douglas (DAKOTA) 1800 mm
1 x Brass hexagonal rod Ø 5 mm x 1000 mm
1 x Carbon Non-Woven, 240 g/m² 100 cm x 20 m
1 x DC-3 Douglas (DAKOTA) 1800 mm Electric LG
1 x Epoxy Resin HT 2 + Hardener HT 2 (60 min) 1 kg
1 x ARAMID honeycomb 1300x2600x2 mm
1 x KingTech T-Modul 5 in 1 Telemetry
1 x Paramotor BackPack XXS (without accessories)
1 x Motor A60-5XS V4 28-pole kv420
1 x SLICK 360-B 104" (2640 mm)
1 x Futaba F14 Twin Boat Stick
1 x 43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs)
1 x Aluminium Hub "Z" for folding Props 30 mm M8 Shaft 5 mm
1 x Para-RC "RC-Evo-Cross" Rescue
1 x Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch 5 m
1 x Gold aluminium servo arm V2-JR 1,0" inch M3
1 x Servo Arm aluminium ALU-STAR
1 x Starter EM Gear Power 80
1 x Turbina KINGTECH K320 G5
1 x Adaptadores carga 6s JST-XH
1 x EXTRA NG 74" yello/blue/red (Skywing RC)
1 x Electric Landing Gear "Black Edition" ULTIMATUM 3.0 (Elektron Re
1 x Crimping tool
1 x PROXXON - SANDING BELTS FOR BSL 220/E 120 GRIT (5 pcs)
1 x Hexagonal ball head 2.0 x 50 mm
1 x Z Bender - S Type Tool
1 x PROXXON - SANDING BELTS FOR BSL 220/E 80 GRIT (5 pcs)
65,486.91EUR
Manufacturers
Manufacturer Info
E-Flite
E-Flite Homepage
Other products
Languages
Español English
Currencies