439.01EUR

PowerBox Competition SR2
[POWER4450]


Features

22 channels
High-performance battery backer with high continuous load capacity
2.4” TFT screen, legible in sunlight
Bi-lingual menu system
Consistent duplication of all power electronics
Redundant electronic switch
Servo matching for all 22 outputs
Auto matching function
Two independent door sequencers with Setup Assistant
The latest integrated iGyro technology, using the iGyroSAT as gyro sensor
Twelve independent gyro outputs for: 4x aileron, 4x elevator, 4x rudder
Individual gain control for all twelve gyro outputs
Special regulatory algorithm for fixed-wing models
System detects all transmitter mixers
Four selectable output voltages: 6.0 V, 7.4 V, 7.8 V or unregulated
Graphic menu diagrams ensure ultra-simple programming
Fast basic setup procedure using the sophisticated Assistant
Optional GPS III for speed-dependent gyro compensation
Telemetry data for PowerBox P²BUS, Futaba S.BUS2, Jeti Ex-BUS, Spektrum SRXL2, Multiplex M-Link and Graupner HoTT
Transmission of battery, receiver and GPS* data
Virtually all features can be controlled from PowerBox and Jeti transmitters
Selectable servo frame rate: 10ms, 12ms, 14ms, 16ms, 18ms
Servo feedback current suppression
Latest 32-bit micro-processor for precise, high-speed signal processing
High-performance machined heat-sink for optimised heat diffusion
Machined, anodised aluminium switch and screen case
Compact dimensions

Technical Data
Operating voltage 4.0V - 9.0V
Power supply 2S LiPo, 2S LiIon, 2S LiFePo, 5S NiCd/NiMH
Current drain Power-on state 260mA
Current drain Standby 30µA
Maximum load current 2x40A (<30s)
Drop-out voltage 0.3V
Output voltage 6.0V, 7.4V, 7.8V, unregulated
Signal input serial
Supported RC systems PowerBox, Futaba, Jeti, Spektrum, M-Link and Hott
Receiver redundancy SRS
Channels 26
Servo sockets 22
Programmable servo outputs 22
Servo signal resolution 0,25µs
Signal frame rate 10ms, 12ms, 14ms, 16ms, 18ms
Gyro sensor type external iGyro SAT
Number of sensor axes 12
Screen TFT 320x240 pixels
Integral door sequencer yes
Supported telemetry systems P²BUS, S.BUS2, EX-Tele, SRXL2, M-Link, Hott

Dimensions 107 x 69 x 19 mm
Weight 115g
Weight Sensor Switch 15g
Weight of LCD screen 34g
Temperature range -30°C to +105°C


Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x Mahogany wood slat 1.5x1.5x1000 mm
1 x Pine wood slat 2.0x10.0x1000 mm
1 x Pine wood slat 2.0x2.0x1000 mm
1 x BALSA trip 3.0x3.0x1000 mm
1 x Pine wood slat 10x10x1000 mm
1 x BALSA trip 2.0x2.0x1000 mm
1 x Mahogany wood slat 3.0x3.0x1000 mm
1 x BALSA trip 2.0x10.0x1000 mm
1 x BALSA triangular 15x15x1000 mm
1 x Horizontal cockpit anchor "tipe F3A" (2 pcs)
1 x Cap closure 33/23.5mm (2 uds)
1 x Steering arm 12 mm Ø 4 mm
1 x Steering arm 16 mm Ø 3 mm
1 x Locking cable tie 4.6x203 (uds)
1 x Electric spoiler 250 mm (2 pcs)
1 x Stainless steel cable Ø 0.5 mm (2 m)
1 x One touch canopy lock
1 x Canopy Lock V1 M3 Blue (2 pcs)
1 x Micro screw-lock pushrod conn snap Ø 1 mm (2 uds)
1 x Crimping sleeves for cable 0.85 mm (10 pcs)
1 x SUS wire 3m (nylon coated)
1 x Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm)
1 x MPX-Dean "T" Adapter
1 x Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm)
1 x CC 01
1 x 4 LiPo XH>EH adapter
1 x Copper lacquer wire Ø0,2 mm (5 m)
1 x Adapter lead MPX/XT60
1 x Cabel charger transmitter GRAUPNER
1 x JETImodel SINGLE BEC
1 x CC 03
1 x Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH
1 x Futaba External voltage input cable Futaba CA-RVIN-700
1 x 30 cm BEC cable (female)
1 x CM-3
1 x Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH
1 x Dean "T" - Futaba Adapter
1 x TrainerCord (master-learner)
1 x Balanceradapter JST-XH (Heli 47G) 2-6 c.
1 x TP/TopFuel - XH 2/3S Adapter
1 x CC 02
1 x 5 LiPo XH>EH adapter
1 x Bec MR UBEC 5A (5v/6v/7v)
1 x USB HLS prog. interface
1 x Red copper lacquer wire Ø0,2 mm (5 m)
1 x Circlick securite
1 x "Y" charging 4mm wire (2 IN-1 OUT).
1 x 3 copper lacquer wire Ø0,2 mm (1 m)
1 x PROXXON - SANDING BELTS FOR BSL 220/E 120 GRIT (5 pcs)
1 x Starter Sullivan-STAR 601
1 x 2,5x60 mm allen screwdriver
1 x Disposable Injector Bags (30x16cm) 100 pcs
1 x Screwdriver for Hexagon 1,27mm
1 x Crimping tool
1 x Vacuum pump 12 CFM
1 x Starter EM Gear Power 250
1 x Vacuum pump P1-N
1 x 2,0x50 mm allen screwdriver
1 x Screwdriver for Torx® TX6
1 x Vacuum Connection VA 1 (for hose Ø 6 mm)
1 x Copier 2x20 cm pcs
1 x Hot Glue Stick RED
1 x Starter EM Gear Power 80
1 x Starter 12v (Max 90 and 15ccm)
1 x Ball Link Plier
1 x Dust collector for mould cleaning
1 x Starter Sullivan-STAR 603 DINATRON
1 x Hot Glue Stick GREEN
1 x PROXXON - SILICON CARBIDE BELTS FOR BSL 220/E
1 x 3,0x60 mm allen screwdriver
1 x Hot Glue Stick BLACK
1 x 1,5x50 mm allen screwdriver
1 x Hexagonal ball head 2.0 x 50 mm
1 x Screwdriver for Torx® TX8
1 x Screwdriver for Hexagon 1,5mm
1 x Z Bender - S Type Tool
1 x Starter 12v (Max 180 and 30ccm)
1 x PROXXON - SANDING BELTS FOR BSL 220/E 180 GRIT (5 pcs)
1 x Copier 5x20 cm pcs
1 x Z Bender - S Type Tool
1 x Digital precision scale up to 2000 g
1 x Absorver mount set for 5-10 Kg models
1 x 150 Newtons FEMA absorber
1 x 100 Newtons FEMA absorber
1 x Wheel FEMA 127 mm / 6 mm
1 x 127x43 Ø6.0 mm aluminium core wheel
1 x L-Connector 1.5 mm x 1000 mm
1 x Aluminun wheel collar 3 mm Ø (4 uds)
1 x Cable set PREMIUM , fuselage/wing one4one
1 x Motor DLE 200cc Premium Muffler
1 x DYNAMOMETER S-1580
1 x DPSI RV Mini 6 Magic
1 x DPSI Micro SingleBat 5.9V/7.2V F3A Edition magnetic switch
7,013.82EUR
Manufacturers
Languages
Español English
Currencies