439.01EUR

PowerBox Competition SR2
[POWER4450]


Features

22 channels
High-performance battery backer with high continuous load capacity
2.4” TFT screen, legible in sunlight
Bi-lingual menu system
Consistent duplication of all power electronics
Redundant electronic switch
Servo matching for all 22 outputs
Auto matching function
Two independent door sequencers with Setup Assistant
The latest integrated iGyro technology, using the iGyroSAT as gyro sensor
Twelve independent gyro outputs for: 4x aileron, 4x elevator, 4x rudder
Individual gain control for all twelve gyro outputs
Special regulatory algorithm for fixed-wing models
System detects all transmitter mixers
Four selectable output voltages: 6.0 V, 7.4 V, 7.8 V or unregulated
Graphic menu diagrams ensure ultra-simple programming
Fast basic setup procedure using the sophisticated Assistant
Optional GPS III for speed-dependent gyro compensation
Telemetry data for PowerBox P²BUS, Futaba S.BUS2, Jeti Ex-BUS, Spektrum SRXL2, Multiplex M-Link and Graupner HoTT
Transmission of battery, receiver and GPS* data
Virtually all features can be controlled from PowerBox and Jeti transmitters
Selectable servo frame rate: 10ms, 12ms, 14ms, 16ms, 18ms
Servo feedback current suppression
Latest 32-bit micro-processor for precise, high-speed signal processing
High-performance machined heat-sink for optimised heat diffusion
Machined, anodised aluminium switch and screen case
Compact dimensions

Technical Data
Operating voltage 4.0V - 9.0V
Power supply 2S LiPo, 2S LiIon, 2S LiFePo, 5S NiCd/NiMH
Current drain Power-on state 260mA
Current drain Standby 30µA
Maximum load current 2x40A (<30s)
Drop-out voltage 0.3V
Output voltage 6.0V, 7.4V, 7.8V, unregulated
Signal input serial
Supported RC systems PowerBox, Futaba, Jeti, Spektrum, M-Link and Hott
Receiver redundancy SRS
Channels 26
Servo sockets 22
Programmable servo outputs 22
Servo signal resolution 0,25µs
Signal frame rate 10ms, 12ms, 14ms, 16ms, 18ms
Gyro sensor type external iGyro SAT
Number of sensor axes 12
Screen TFT 320x240 pixels
Integral door sequencer yes
Supported telemetry systems P²BUS, S.BUS2, EX-Tele, SRXL2, M-Link, Hott

Dimensions 107 x 69 x 19 mm
Weight 115g
Weight Sensor Switch 15g
Weight of LCD screen 34g
Temperature range -30°C to +105°C


Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x Digital precision scale up to 2000 g
1 x Dust collector for mould cleaning
1 x PROXXON - SANDING BELTS FOR BSL 220/E 120 GRIT (5 pcs)
1 x Disposable Injector Bags (30x16cm) 100 pcs
1 x Cut tube
1 x Z Bender - S Type Tool
1 x Hot Glue Stick RED
1 x Vacuum pump P1-N
1 x 1,5x50 mm allen screwdriver
1 x PROXXON - SANDING BELTS FOR BSL 220/E 80 GRIT (5 pcs)
1 x Z Bender - S Type Tool
1 x 
1 x 2,0x50 mm allen screwdriver
1 x Crimping tool
1 x 3,0x60 mm allen screwdriver
1 x Screwdriver for Torx® TX8
2 x Vacuum pump 12 CFM
1 x PROXXON - SILICON CARBIDE BELTS FOR BSL 220/E
1 x Starter EM Gear Power 80
1 x Starter 12v (Max 90 and 15ccm)
1 x Starter EM Gear Power 250
1 x Starter Sullivan-STAR 603 DINATRON
1 x Vacuum Connection VA 1 (for hose Ø 6 mm)
1 x Copier 5x20 cm pcs
1 x Starter 12v (Max 180 and 30ccm)
1 x Screwdriver for Hexagon 1,5mm
1 x 2,5x60 mm allen screwdriver
1 x Starter Sullivan-STAR 601
1 x Crimping tool
1 x Digital Air Speed Sensor And Pitot Tube Set
1 x Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m
1 x Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 20 m
2 x TeXtreme® Carbon tape 38 g/m² (IM, unidirectional) 20 mm x 100m
1 x ARAMID honeycomb 1300x2600x2 mm
2 x Carbon roving DowAksa / 24k / 1600 tex
1 x Fibra carbono tela 160g/m2 100 cm x 2 m (twill weave)
1 x Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m
3 x Demoulding wedge red (40 x 20 mm) 5 pcs
1 x Carbon fibre tape 200 g/m² (unidirectional) 50 mm
1 x Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 22 roll
2 x Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m
2 x Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (20 pcs)
1 x Carbon Non-Woven, 160 g/m² 127 cm 1 m
1 x Glass fabric tape 225 g/m² (Silane, plain) 30 mm X 100m
1 x Vacuum bag, 1200 mm x 50 m
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x4.0 mm (5 pcs)
1 x Carbon Non-Woven, 160 g/m² 127 cm 5m
2 x Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 50 m
1 x Aluminium tube (L 1000 mm, Ø4.0 mm, Ø3.1 mm)
1 x ABS tube 4.0x2.0x1000 mm
1 x Ply-Span 450x600/13g Orange
1 x Universal Colour Paste deep black 250 g
1 x Flat washer 1.7 mm (20 pcs)
1 x Aluminium wide washer M3 blue (4 pcs)
1 x Circlik for shaft 1.9 mm (10 pcs)
1 x Covered closure or fairings
1 x Soldering tip for KAVAN soldering iron KAV66.8338
1 x Roller cutter 28 mm
1 x Spare round blades, 28 mm, pack/ 2 pcs.
1 x PROXXON - SANDING BELTS FOR BSL 220/E 180 GRIT (5 pcs)
1 x Carbon plate 550x350x4.0 mm ECOTECH
1 x Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 15 m
1 x Fiberglass plate 350x150x1.0 mm
1 x Exhaust elbow for SAITO FA65/72/80/82a/91S/100/
1 x Carbon plate 550x350x1.5 mm ECOTECH
1 x Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m
1 x Fiberglass plate 350x150x1.5 mm
1 x T- Fittings red color (2pcs)
1 x PVC grid straight 290x185x0.32 mm
1 x Carbon plate 350x150x3.0 mm
1 x Fiberglass plate 1200x1000x0,2 mm
1 x Sparkplug DLE CM6
1 x Glass fabric 25 g/m² (1 m²)
1 x Peel ply 93 g/m² (plain weave) 150 cm x 5m
1 x Glass fabric tape 225 g/m² (Silane, plain) 40 mm X 100m
1 x T-Hose connector 3-3-3 mm
1 x O-ring Saito FG-73 5cyl
1 x Fiberglass plate 350x150x0.5 mm
1 x Quick hose connector 4-3 mm
1 x Conector FESTO M3 Quick 3mm 90º
1 x Fibra carbono 3k tela 160g/m2 100 cm x 5m
1 x PVC grid diagonal 290x185x0.32 mm
1 x FESTO connector M7 barb fitting XL Tygon
1 x Fuel Fittings-Red
1 x Glass fabric 80 g/m² (FK 144, twill weave) 100 cm, pack/ 1 m
1 x Carbon plate 550x350x3.0 mm ECOTECH
1 x Junta humo metalica G20 (DLE20/DLE20RA/DLE40)
1 x Carbon Non-Woven, 160 g/m² 100 cm 10 m
1 x Thermoforming sheet 0.3mm (0.039in) DIN A4
1 x Tube Pitot to PIXHAWK
1 x Conector FESTO G1/8 Quick 4mm 90º
1 x Sparkplug 1/4-32
1 x Foam plastic plates (310x210x3 mm)
1 x Glass fabric 25 g (2 m²)
1 x Support 45% Hopper JetsMunt
1 x Glass fabric 49 g/m² (Finish FE 800, plain) 110 cm x 1m
1 x Fuel tank 500ml (17oz)
1 x T-Hose connector 4-4-4mm
1 x Compact Pitts Muffler OS MAX.35.40 FP
1 x Fuel Fittings-Gold
1 x 48 x 10 mm cylidric hinge Ø 3,0 mm (10 pcs)
1 x 67 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
1 x Pin type hinge Al 6x98 mm (2 pcs)
1 x Pin type hinge Al 4,5x70 mm (2 pcs)
1 x Pin type hinge Al 3,0x50 mm demount (2 pcs)
1 x 48 mm cylidric hinge Ø 2,5 mm (5 pcs)
1 x 18 mm reinforced hinge
1 x Small pinned hinge (12 uds)
1 x 76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
1 x 15 mm reinforced hinge
1 x Long pinned hinge (6 uds)
1 x Gates hinge black 30x16 mm (2 pcs)
1 x Nylon hinge for flaps 33x9 (2 pcs)
1 x Miniature brass strap hinge, 1 m
1 x Nylon hinge 20x15x0,3 (10 pcs)
1 x Unmounted aluminium pin 6x98 mm (2 pcs)
1 x Nylon hinge 20x20x0,3 (10 pcs)
1 x Cylidric hinge 43 mm Ø 2,5 mm (5 pcs)
7,590.20EUR
Manufacturers
Languages
Español English
Currencies