Top » Catalog » Hardware » Power supply system/Data Recordi » PowerBoxSystems » POWER4450

439.01EUR

PowerBox Competition SR2
[POWER4450]

Features

22 channels
High-performance battery backer with high continuous load capacity
2.4” TFT screen, legible in sunlight
Bi-lingual menu system
Consistent duplication of all power electronics
Redundant electronic switch
Servo matching for all 22 outputs
Auto matching function
Two independent door sequencers with Setup Assistant
The latest integrated iGyro technology, using the iGyroSAT as gyro sensor
Twelve independent gyro outputs for: 4x aileron, 4x elevator, 4x rudder
Individual gain control for all twelve gyro outputs
Special regulatory algorithm for fixed-wing models
System detects all transmitter mixers
Four selectable output voltages: 6.0 V, 7.4 V, 7.8 V or unregulated
Graphic menu diagrams ensure ultra-simple programming
Fast basic setup procedure using the sophisticated Assistant
Optional GPS III for speed-dependent gyro compensation
Telemetry data for PowerBox P²BUS, Futaba S.BUS2, Jeti Ex-BUS, Spektrum SRXL2, Multiplex M-Link and Graupner HoTT
Transmission of battery, receiver and GPS* data
Virtually all features can be controlled from PowerBox and Jeti transmitters
Selectable servo frame rate: 10ms, 12ms, 14ms, 16ms, 18ms
Servo feedback current suppression
Latest 32-bit micro-processor for precise, high-speed signal processing
High-performance machined heat-sink for optimised heat diffusion
Machined, anodised aluminium switch and screen case
Compact dimensions

Technical Data
Operating voltage 4.0V - 9.0V
Power supply 2S LiPo, 2S LiIon, 2S LiFePo, 5S NiCd/NiMH
Current drain Power-on state 260mA
Current drain Standby 30µA
Maximum load current 2x40A (<30s)
Drop-out voltage 0.3V
Output voltage 6.0V, 7.4V, 7.8V, unregulated
Signal input serial
Supported RC systems PowerBox, Futaba, Jeti, Spektrum, M-Link and Hott
Receiver redundancy SRS
Channels 26
Servo sockets 22
Programmable servo outputs 22
Servo signal resolution 0,25µs
Signal frame rate 10ms, 12ms, 14ms, 16ms, 18ms
Gyro sensor type external iGyro SAT
Number of sensor axes 12
Screen TFT 320x240 pixels
Integral door sequencer yes
Supported telemetry systems P²BUS, S.BUS2, EX-Tele, SRXL2, M-Link, Hott

Dimensions 107 x 69 x 19 mm
Weight 115g
Weight Sensor Switch 15g
Weight of LCD screen 34g
Temperature range -30°C to +105°C

under request

Reviews

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->

  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
    Bavarian Demon
    Dymond
    Eagle Tree
    Emcotec
    Futaba
    Jeti
    PowerBoxSystems
    ROI IMPORT
    SebART
    Setlo
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

Regulador Hobbywing Platinum 260A HV SBEC V5
520.00EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

2 x	Camera Sony 4140+673 CCD with Built-in 200mw TX + antenna
1 x	JR silicone servo wire 0,35 qmm / 5m
1 x	1 m servo "Premium" wire (white/red/blue)
1 x	ABS tube 4.0x3.0x1000 mm
1 x	ABS tube 3.0x1.0x1000 mm
1 x	PVC 0,08 qmm Futaba servos wire (5 m)
1 x	Silicone 0,14 qmm servos wire Graupner (5 m)
1 x	Silicone 0,14 qmm servos wire Graupner (100 m)
1 x	Silicone 0,50 qmm servos wire Graupner(100 m)
1 x	Steel tube (L 1000 mm Ø5 mm, Ø4,7 mm)
1 x	ABS tube 8.0x6.0x1000 mm
1 x	Aluminium tube (L 1000 mm, Ø4.0 mm, Ø3.1 mm)
1 x	ABS tube 20.0x18.0x1000 mm
1 x	Cable servo PREMIUM MAXI 100m (blanco/rojo/azul) PVC
1 x	Thinwall Stainless Steel Tubing 28x0.6x1000 mm
1 x	ABS tube 5.0x3.0x1000 mm
1 x	Green silicone 0,25 qmm wire (50 m)
1 x	ABS tube 5.0x4.0x156 mm
1 x	Cable servo PREMIUM MAXI 50m (blanco/rojo/azul) PVC
1 x	Black silicone 0,25 mm² wire (25 m)
1 x	Aluminium tube (L 1000 mm, Ø3.0 mm, Ø2.1 mm)
1 x	Vertical cockpit anchor "tipe F3A" (2 pcs)
1 x	Stainless steel cable Ø 0.88 mm - 60 kp (10 m)
1 x	Cap closure 33/23.5mm (2 uds)
1 x	Crimping sleeves for cable 1.3 mm (10 pcs)
2 x	Canopy Lock V1 M3 Red (2 pcs)
2 x	Steering arm 12 mm Ø 4 mm
2 x	Cierre cabina aluminio Ø4, I=10 mm
1 x	Canopy Latch
2 x	Steering arm 16 mm Ø 4 mm (2 uds)
1 x	Canopy Lock V1 M3 Blue (2 pcs)
1 x	Cabin latch Fox MDM1 4m (pair)
1 x	Stainless steel cable Ø 0.52 mm - 15 kp (10 m)
1 x	Screw-lock connector M2 (2 uds)
2 x	Stainless steel cable Ø 1.3 mm (10 m)
1 x	Covered closure or fairings
1 x	Steering arm 16 mm Ø 3 mm
1 x	Electric spoiler 250 mm (2 pcs)
1 x	Screw-lock pushrod conn snap Ø 1.5 mm (2 uds)
2 x	Crimping sleeves for cable 0.70 mm (10 pcs)
2 x	USB Mini Camera endoscope
1 x	Stainless steel cable Ø 0.62 mm (10 m)
3 x	Stainless steel cable Ø 0.5 mm (2 m)
1 x	Cockpit plastic closing
1 x	Flat washer 2.7 mm (20 uds)pcs)
1 x	Flat washer 3.2 mm (20 pcs)
1 x	Aluminium wide washer M4 Gold (4 pcs)
1 x	Quicklock washer 1.5 mm (10 pcs)
1 x	Quicklock washer 3 mm (10 pcs)
1 x	Aluminium wide washer M3 red (4 pcs)
1 x	Spring lock washer 4.1 mm (20 pcs)
1 x	Aluminium cap bolt washer M3 red (8 pcs)
1 x	Spring lock washer 2.1 mm (20 pcs)
2 x	Flat washer 2.2 mm (20 pcs)
1 x	Quicklock washer 2.5 mm (10 pcs)
2 x	Quicklock washer 2 mm (10 pcs)
1 x	Quicklock washer 3.5 mm (10 pcs)
1 x	Lock washer 3.2 mm (20 pcs)
1 x	Aluminium cap bolt washer M3 green (8 pcs)
2 x	Circlik for shaft 1.5 mm (10 pcs)
1 x	Circlik for shaft 2.3 mm (10 pcs)
1 x	Aluminium cap bolt washer M3 blue (8 pcs)
1 x	Aluminium wide washer M3 gold (4 pcs)
1 x	Aluminium cap bolt washer M4 blue (8 pcs)
1 x	Flat washer 1.7 mm (20 pcs)
1 x	Lock washer 2.2 mm (20 pcs)
1 x	Circlik for shaft 1.9 mm (10 pcs)
1 x	Carbon fiber rod 5.0 mmx1000 mm
1 x	Nylon hinge for flaps 33x9 (2 pcs)
1 x	LED wire (rojo - 2pcs)
1 x	Jet Afterburner Simulator NF-Jet2
1 x	Aro pasacable Ø25 mm (4 pcs)
1 x	Support pumb/filter Xicoy X45
1 x	NF-2 RC set
1 x	Jet Afterburner Simulator NF-Jet2YY Set
1 x	Carbon plate 350x150x3.0 mm
1 x	Carbon fiber rod 6.0 mmx1000 mm
1 x	Crimping sleeves for cable 0.85 mm (10 pcs)
1 x	Blind nut M8 (10 pcs)
1 x	Big Crow DLE-170M
1 x	Motor DLE 170 M- Paramotors
1 x	Silent-blocks DLE 170M
2 x	Motor DLE 200cc Std
1 x	Motor DLE 200cc Premium Muffler
1 x	Black 2,4 GHz antenna exit guides (2 pcs)
1 x	Clip fixing for wing (2 pcs)
1 x	90 mm rods + T patellas set for direction control
1 x	Aluminun wheel collar 2.5 mm Ø (4 uds)
1 x	Wheel collar 4 mm Ø (4 uds)
1 x	Locking cable tie 4.6x203 (uds)
1 x	Stainless steel cable Ø 0.5 mm (10 m)
1 x	Snap short M2 (10 uds)
1 x	Aluminun wheel collar 6 mm Ø (4 uds)
1 x	Aluminun wheel collar 4 mm Ø (4 uds)
1 x	Press fitting for 0,5 diam. steel cable (10 pcs)
1 x	Wing bolts M3 Steel screw blue (2 pcs)
2 x	Micro screw-lock pushrod conn snap Ø 1 mm (2 uds)
1 x	Pushrod greyline 3/2 with coupler M2
1 x	ABS "T" angle 6.0x6.0x1000 mm
1 x	Flat Connector 4.0 mm x 1000 mm
1 x	L-Connector 1.5 mm x 1000 mm
1 x	ABS "T" angle 2.0x2.0x1000 mm
1 x	ABS angle 4,0x4,0x1000 mm
1 x	Profile ABS Square 3 x 1000 mm
1 x	U Profile ABS 1,0x2,0x1000 mm
1 x	Profile ABS half cane 3x1000 mm
1 x	Streamline Stainless Steel Tubing 14.5x9.6x1000 mm
1 x	Streamline Stainless Steel Tubing 15.5x8.5x1000 mm
1 x	U Profile ABS 3,0x6,0x1000 mm
1 x	Gold antispark 4 mm plug
1 x	Connectors banna gold 5,5 mm (M/F)
1 x	Conector AS150 7mm antichispazo (Set: 2 pares)
1 x	Triple rod con. 3mm Pushrod (2 pcs)
1 x	Screw-lock connector Ø 2 mm (2 uds)
1 x	One touch canopy lock
1 x	Split M1,2x10 (10 pcs)
1 x	Stainless steel cable Ø 0.5 mm (20 m)
1 x	Cierre cabina aluminio Ø5, I=16 mm
1 x	Tip wing protector 40x14 (2 pcs)
1 x	250 mm / 16 mm Airbrakes
1 x	Split pin 1.6x16 mm (10 uds)
1 x	Pushrod octagone 4/3
1 x	Wing bolts M6 Steel screw Blue (2 pcs)
1 x	Locking cable tie 2.5x100 (uds)
1 x	100 mm rods set for direction control
1 x	Allen wheel collar M3x3
1 x	Window mounting channel Type H 2.5x0.5 (2 m)
1 x	Wing bolts M6 Steel screw Red (2 pcs)
1 x	Pan Head Screw M2x8 PH
1 x	Profile ABS half cane 2.5x1000 mm
1 x	Hexagonal Nut M2.5 (10 pcs)
1 x	Nylon Screw M5x30
1 x	Hexagonal Nut M4 (10 pcs)
2 x	Flat washer 4.3 mm (20 pcs)
1 x	Fully Threaded Steel Rod M3
1 x	Anodized aluminium servo M4x5/8 screw (4 silver pcs)
1 x	Cable grommet 9.5 mm (4 uds)
1 x	Blue Aluminium lock nut M4 (4 pcs)
1 x	Anodized aluminium servo M4x5/8 screw (4 lilac pcs)
1 x	Nut for mounting M3 (10 pcs)
1 x	Anodized aluminium M4x0,7x20 mm screw (4 blue pcs)
1 x	Lock nut M6 (10 pcs)
1 x	Blind nut M5 (10 pcs)
1 x	Hexagonal Nut M1 (10 pcs)
1 x	Blind nut M3 (4 pcs)

11,861.54EUR