439.01EUR

PowerBox Competition SR2
[POWER4450]


Features

22 channels
High-performance battery backer with high continuous load capacity
2.4” TFT screen, legible in sunlight
Bi-lingual menu system
Consistent duplication of all power electronics
Redundant electronic switch
Servo matching for all 22 outputs
Auto matching function
Two independent door sequencers with Setup Assistant
The latest integrated iGyro technology, using the iGyroSAT as gyro sensor
Twelve independent gyro outputs for: 4x aileron, 4x elevator, 4x rudder
Individual gain control for all twelve gyro outputs
Special regulatory algorithm for fixed-wing models
System detects all transmitter mixers
Four selectable output voltages: 6.0 V, 7.4 V, 7.8 V or unregulated
Graphic menu diagrams ensure ultra-simple programming
Fast basic setup procedure using the sophisticated Assistant
Optional GPS III for speed-dependent gyro compensation
Telemetry data for PowerBox P²BUS, Futaba S.BUS2, Jeti Ex-BUS, Spektrum SRXL2, Multiplex M-Link and Graupner HoTT
Transmission of battery, receiver and GPS* data
Virtually all features can be controlled from PowerBox and Jeti transmitters
Selectable servo frame rate: 10ms, 12ms, 14ms, 16ms, 18ms
Servo feedback current suppression
Latest 32-bit micro-processor for precise, high-speed signal processing
High-performance machined heat-sink for optimised heat diffusion
Machined, anodised aluminium switch and screen case
Compact dimensions

Technical Data
Operating voltage 4.0V - 9.0V
Power supply 2S LiPo, 2S LiIon, 2S LiFePo, 5S NiCd/NiMH
Current drain Power-on state 260mA
Current drain Standby 30µA
Maximum load current 2x40A (<30s)
Drop-out voltage 0.3V
Output voltage 6.0V, 7.4V, 7.8V, unregulated
Signal input serial
Supported RC systems PowerBox, Futaba, Jeti, Spektrum, M-Link and Hott
Receiver redundancy SRS
Channels 26
Servo sockets 22
Programmable servo outputs 22
Servo signal resolution 0,25µs
Signal frame rate 10ms, 12ms, 14ms, 16ms, 18ms
Gyro sensor type external iGyro SAT
Number of sensor axes 12
Screen TFT 320x240 pixels
Integral door sequencer yes
Supported telemetry systems P²BUS, S.BUS2, EX-Tele, SRXL2, M-Link, Hott

Dimensions 107 x 69 x 19 mm
Weight 115g
Weight Sensor Switch 15g
Weight of LCD screen 34g
Temperature range -30°C to +105°C


Comentarios
Categorías
* OFERTAS MES *
Aviones->
Veleros->
Autogiros->
Helicópteros->
UAVs - RPAs->
Multicópteros->
Accesorios->
  3D IMPRESION
  Actuadores
  Adaptadores->
  Altimetros->
  Amperímetros
  Anemómetros
  Auto-Pilot
  Banco pruebas
  Baterías->
  Bayonetas
  BEC/Cables/Conector/
Interrup

  Bisagras
  Cables
  Cajas de vuelo
  Camaras->
  Cargadores->
  Catalogos
  Catapultas/Bungees
  Centralitas/Registro de Datos->
    Bavarian Demon
    Dymond
    Eagle Tree
    Emcotec
    Futaba
    Jeti
    PowerBoxSystems
    ROI IMPORT
    SebART
    Setlo
  Cintas/Cierres/Bridas
  Combustible->
  Conectores
  Conos/Muletas->
  Emisoras/ Radios/Receptores->
  Extintores
  Extractores piñones
  Ferritas
  Fibra/Carbono/Planchas/Malla/ABS
  Fundas
  Gafas
  Hardware
  Helices->
  Herramientas
  Horns mando
  Humo/Cohetería/Pirotecnia
  Instrumentos/ Paneles
  Linkages/Clevis
  Luces/Iluminacion->
  Maderas/ Listones
  Merchandising
  Pegamentos/Resinas/Epoxy->
  Pegatinas
  Perfiles
  Pilotos
  Prolongadores
  Recubrimientos/Termorretráctil
  Reguladores / Variadores->
  Remolque
  Rótulas
  Ruedas/Ejes->
  Servos->
  Simuladores
  Soportes/CG/Incidenc.
  Sprays/Pinturas/Barnices/Pastas
  Tornilleria
  Trenes de aterrizaje->
  Tubo Carbono/Latón/Acero/Alu
  Varilla Acero/Latón/Alum
  Varilla carbono
  Varillas-Listones ABS
Coches / Trucks->
Motores y Turbinas->
Motores Gas. Paramotores
Acces. para Motores->
Parapentes/Paracaídas/Mangas
Barcos/Unidades navales->
FPV->
Robots->
Corte CNC
Portaequipajes
Crash kits
Zona Outlet->
2ª Mano
Merchandising HA
Aceptamos
Búsqueda Rápida
 
Use palabras clave para encontrar el producto que busca.
Búsqueda Avanzada
1 x Soporte metal para servos
1 x Servo HBS 690BB HV Digital
1 x SERVO DES 707 BB MG, Piñones
1 x SERVO DES 657/675 Piñones
1 x SERVO DES 568 MG
1 x SERVO DES 707 BB MG
1 x SERVO DES 806 Piñones
1 x SERVO DES 588 BB MG
1 x Servo RHINO pro SHV digi 4
1 x Brazo servo doble alu. RHINO
1 x Fibra carbono tela 160g/m2 100 cm x 2 m (twill weave)
1 x Abrazadera con letrero (20 pcs)
1 x Sistema cierre Mini 14x60 mm (4 pcs)
2 x Cinta Roving carbono 20m
1 x Cinta fibra Carbono 125 g/m², 3k, UD (50 mm) roll/ 20 m
1 x Sistema cierre 240 mm con abrazadera (2 pcs)
2 x Cinta autoadhesiva 5 mm x 16.80m; Diente 0.5 mm
1 x Sistema cierre 350 mm con abrazadera (2 pcs)
1 x Cinta Goldfix 1m
1 x Sistema cierre 360 mm con abrazadera (2 pcs)
1 x Fibra carbono tela 200 g/m² (Aero, plain weave) 100 cm x 5m
1 x Sistema cierre baterías 20x200 mm
1 x Cinta fibra carbono 25 mm 3k 125 g/m2 x 10m
1 x Cinta fibra carbono 25 mm 3k 125 g/m2 x 50m
3 x Sistema cierre negro doble cara 20x1000 mm
1 x Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m
2 x Soporte para bridas de hasta 3 mm (10 pcs)
1 x Bolsa vacio 1200 mm x 50 m
1 x Cinta fibra Carbono 125 g/m², 3k, UD (50 mm) roll/ 50 m
1 x Cinta autoadhesiva 13 mm x 16.80m; Diente 1.0 mm
1 x Fibra carbono tela 160g/m2 127 cm x 10 m
1 x Sistema cierre 330 mm con abrazadera (4 pcs)
1 x Cinta fibra Carbono 125 g/m², 3k, UD (100 mm) roll/ 50 m
1 x Cinta fibra de vidrio 130 g / m² (Silane, liso) 25 mm, 50m
1 x Bridas 1,66x71 / 0,07x2,8"mm (20 pcs)
1 x Sistema cierre 300 mm con abrazadera (2 pcs)
1 x Fibra carbono tela 200 g/m² (Aero, plain weave) 100 cm x 3m
1 x AIREX® M060 lámina (amarilla) 1200x550x2,0 mm (20 pcs)
1 x Camara USB micro endoscopica
1 x Destornillador allen 2,0x50 mm molibdeno
1 x Bolsas inyectoras desechables (30x16cm) 100 pcs
1 x Arrancador EM Gear Power 250
1 x Destornillador Allen 1.5 mm
1 x Arrancador 12v (Max 90 and 15ccm)
1 x Destornillador allen 1,5x50 mm molibdeno
2 x Pegatinas números para marcar
1 x Arrancador Sullivan-STAR 601
1 x Bascula precision 0.1-2000 g
1 x Destornillador allen "Hex" Ø 2.0 molibdeno
1 x Barra pegamento caliente Rojo
1 x Sensor digital Air Speed con Pitot
1 x PIX Hawk con accesorios
1 x Listón de CAOBA 2,0x2,0x1000 mm
1 x Liston de BALSA 2,0x10,0x1000 mm
1 x Listón triangular de BALSA 15x15x1000 mm
1 x Listón de NOGAL 2,0x2,0x1000 mm
1 x Listón de PINO 3,0x5,0x1000 mm
1 x Listón de CAOBA 3,0x3,0x1000 mm
1 x Listón de BALSA 3,0x5,0x1000 mm
1 x Listón triangular de BALSA 10x10x1000 mm
1 x Liston HAYA 10 x 10 x 1000 mm
1 x Borde Salida BALSA 35x8x1000 mm
1 x Listón de BALSA 4,0x4,0x1000 mm
1 x Listón de BALSA 3,0x3,0x1000 mm
1 x Listón de TILO 3,0x3,0x1000 mm
1 x Liston de BALSA 6,0x6,0x1000 mm
1 x Listón de HAYA redondo 4,0 x 1000 mm
1 x Listón de PINO 3,0x10,0x1000 mm
1 x Listón de PINO 1,5x3,0x1000 mm
1 x Liston HAYA 8 x 8 x 1000 mm
1 x Listón de PINO 3,0x7,0x1000 mm
1 x Liston de BALSA Borde ataque 8 x 10 x 1000 mm
1 x Listón de NOGAL 1,5x1,5x1000 mm
1 x Listón triangular de BALSA 8x8x1000 mm
1 x Servo HITEC HS-5084 MG
1 x Liston ABS H 1,5x1,5x330 mm
1 x Servo HITEC D-955 TW Titanium
1 x PCARD sistema wireless
1 x Cartucho de humo Azul 100 g
1 x Sistema remoto de ignición eléctrica
1 x Tandem dirección para dos servos Futaba
1 x Malla PVC diagonal 290x185x0,32 mm
1 x Plancha estireno 320x120x1.0 mm
2 x Plancha fibra vidrio 350x150x0.3 mm
1 x Plancha ABS 500 x 400 x 2,0 mm (blanco)
1 x Malla PVC cuadrada 290x185x0,32 mm
1 x Plancha carbono 550x350x4.0 mm ECOTECH
1 x Cinta alerones 1m x 10mm
1 x Manga de fibra de vidrio Ø 20 mm x 5m
1 x Sistema cierre HACKER 300 mm con abrazadera (2 pcs)
1 x PET film Mylar® A 350, 50 cm, roll/ 2 m
1 x Cinta autoadhesiva 10 mm x 12m; Diente 0.5 mm
1 x Plancha ABS 500 x 400 x 1,5 mm (blanco)
1 x Peel Ply liso 95 g/m2 20 mm x 100 m
1 x Peel Ply liso 95 g/m2 100 mm x 100 m
1 x Cinta autoadhesiva 13 mm x 16.80m; Diente 0.5 mm
1 x Plancha termoformable 0,1 mm (0,004") DIN A5
1 x Acorazado SCHARNHORST 1:200
1 x Sandwich carbon + poplar 4mm + carbon 480x290 mm
1 x Listón de PINO 6,0x6,0x1000 mm
1 x Listón de HAYA redondo 2,0 x 1000 mm
1 x Tensor de 28 mm
1 x Eje barco de 290 mm M4/M4 6.0x4.0 mm
1 x La Capitania di Venetia 1:50
1 x Hélice de 25,0 mm 3-BL M4 (hélice derecha)
1 x Sistema cierre 200 mm con abrazadera (2 pcs)
1 x Cable conexión RX
1 x Palas de autogiro de 330 mm
1 x Molde conector XT-60
1 x Bungee HLG Premium
1 x 3x8W Triple-Spotlight, 12mm, T-Fuse White
1 x Servo SAVOX SC-1267 SG
1 x Modulo PPM Encoder
1 x Plancha de balsa 1,0x100x1000 mm
1 x Servo HITEC HS-45 HB
1 x Servo HITEC HS-5065 MG digital
1 x Plancha contrachapado Abedul 600x300x3,0 mm
1 x Servo HITEC D951 TW
1 x Plancha contrachapado HAYA 600 x 300 x 2,0 mm
1 x Plancha contrachapado "Economy" 600x300x6,0 mm
1 x Plancha contrachapado Abedul 600x300x0,8 mm
1 x Combustible Glow 4T "KAVAN" air/heli 15% nitro
1 x Combustible Glow "KAVAN" air/heli 15% nitro
1 x THERMIK XL 4000 mm
1 x Bayoneta de carbono cuadrada 5x5x220 mm
1 x Varilla carbono 2.0 mmx1000 mm
5,419.47EUR
Fabricantes
Información del Fabricante
PowerBox Systems
PowerBox Systems Página Principal
Otros productos
Idiomas
Español English
Monedas