4 x | Metal gear set for HS81MG/5082MG |
6 x | Big-Malibu XL Roof box with surfboard rack GREY |
4 x | Spare Part Frame Set for EACHINE RACER 250 |
3 x | Blade Holder (3 blades) |
2 x | Blade Holder Full (3 blades) |
7 x | APM2.6 Power module with 5.3V DC BEC |
4 x | F450/550 Quadcopter, landing gear |
5 x | Silicon red 1,0 qmm cable ( 25 m) |
4 x | Spinner Alumin. propeller pleg. 30 mm / 3,2 mm |
4 x | 10 mm Quick clamp_L (6 pcs) |
3 x | Black silicone 1,0 qmm wire (50 m) |
4 x | PVC 0,14 qmm servos wire Graupner (100 m) |
6 x | PVC 0,14 qmm servo wire Futaba (5 m) |
7 x | PVC 0,14 qmm servos wire JR/Graupner (5 m) |
6 x | Red silicone 1,0 qmm wire (50 m) |
3 x | Silicone 0,25 qmm servos wire Graupner (5 m) |
5 x | Blue silicone 0,5 qmm wire (50 m) |
4 x | Green silicone 0,25 mm² wire (25 m) |
5 x | Silicone 0,35 qmm servos wire Futaba (100 m) |
6 x | Silicone 0,14 qmm servos wire Graupner (5 m) |
4 x | Protective Cover for wires Ø 6 mm 1000 mm |
3 x | JR silicone servo wire 0,35 qmm / 5m |
3 x | Protective Cover for wires Ø 6 mm 1000 mm |
6 x | Cabel PVC 2 x 0.25 mm2 (5 m) red-black |
8 x | Silicone 0,25 qmm servos wire Graupner (100 m) |
4 x | Cable set PREMIUM, fuselage/wing |
2 x | Blue smoke canister 140 g |
2 x | Cap Hispano Aviación |
4 x | Red smoke canister 65 g |
3 x | TS832 to Gopro AV/Power Cable DJI Phantom 2 Compatible |
2 x | White smoke canister 100 g |
2 x | Green smoke canister 140 g |
4 x | White smoke canister 140 g |
2 x | Electric rocket starters (6 pcs) |
1 x | "S" set for boats |
2 x | Initior Transmitter FTX2 Wireless |
3 x | Yellow smoke canister 65 g |
1 x | Red smoke canister 100 g |
2 x | Yellow smoke bombs AX-60 (5 pcs) |
5 x | Yellow smoke canister 140 g |
4 x | Motor rotor LA-500 |
2 x | Profile ABS Square 3 x 1000 mm |
2 x | "M" set |
3 x | Complet landing gear |
3 x | Screws flush mount M2 |
2 x | Anodized alum. M4x0,7x20 mm Button Head screw (4 dark blue pcs) |
5 x | Servo Fork |
3 x | ABS rectangular profile 12x6.0x1000 mm |
1 x | Cierva C30 Body Spain |
2 x | ABS tube 2.0x1.0x1000 mm |
1 x | ABS tube 3.0x1.0x1000 mm |
2 x | Parachute expulsion foam |
2 x | Profile ABS triangular 4.0x1000 mm 60º |
3 x | 1/6 Pilot "John" |
3 x | Glases Stratus |
2 x | Blind nut M8 (10 pcs) |
3 x | Zurich Sport Sunglasse Dark Sensity BROWN Glasses |
2 x | ABS tube 9.0x7.0x1000 mm |
4 x | ABS tube 8.0x7.0x1000 mm |
2 x | ABS tube 5.0x4.0x156 mm |
3 x | Aluminium wide washer M4 Red (4 pcs) |
3 x | Anodized aluminium M4x0,7x20 mm screw (4 blue pcs) |
2 x | Wing tips support for AX-18/AX-60 (2 pcs) |
4 x | Pilot JAN 1/4 Saiplanes |
8 x | Bird (Aero-naut) |
1 x | Futaba S3010 Servo - Standard BB 0.16s/6.5kg |
1 x | 1/12 Pilot "Cougar" |
1 x | ABS tube 6.0x4.0x1000 mm |
1 x | Mixers smoke bombs AX-60 (5 pcs) |
2 x | SERVO DES 707 BB MG, Pignons |
3 x | Aluminium tube (L 1000 mm, Ø3.0 mm, Ø2.1 mm) |
2 x | Nut M1,6 |
3 x | Baal link 4/14/4 (5 pcs) |
3 x | Motor Saito FG-90 R3, 90 cc |
3 x | Logo 400 SE VBar |
1 x | Motor Saito FG-14, 13,47 cc |
2 x | Motor Saito FG-36, 36 cc |
7 x | Head spacer |
2 x | Quicklock washer 4 mm (10 pcs) |
2 x | White smoke bombs AX-3 (10 pcs) |
2 x | Blind nut M3 (4 pcs) |
3 x | Softshell Hispano Aviación |
2 x | ABS tube 8.0x6.0x1000 mm |
4 x | Field folding model stand SebArt |
2 x | Anodized aluminium servo M4x5/8 screw (4 black pcs) |
3 x | White smoke canister 65 g |
2 x | Extractor piñones 2.3/3.2 mm |
4 x | 1/6 Pilot "Tony" |
3 x | Green silicone 0,25 qmm wire (50 m) |
2 x | Propeller balancer |
2 x | Aluminium M2x12 mm screw (4 pcs) |
3 x | Red smoke canister 140 g |
3 x | Protective Cover for wires Ø 20 mm 1000 mm |
1 x | ABS tube 7.0x5.0x1000 mm |
4 x | Cable Cargador FUTABA |
2 x | White smoke bombs AX-60 (5 pcs) |
4 x | Glases Ace |
3 x | Protective open Cover for wires Ø 13 mm 1000 mm |
2 x | Spring lock washer 2.6 mm (20 pcs) |
3 x | Lock washer 3.2 mm (20 pcs) |
1 x | Aluminium tube (L 1000 mm, Ø7.0 mm, Ø6.1 mm) |
2 x | Head upper part |
2 x | Silicone red 0,5 qmm wire ( 25 m) |
2 x | Silicone red 0,5 qmm wire ( 1 m) |
2 x | Glider IKARUS |
1 x | Servo FUTABA BLS 272SV |
1 x | PS-050 TONEGAWA Servo |
2 x | Glases Nimbus |
2 x | Cable set PREMIUM , fuselage/wing one4one |
2 x | LA500 pilot-seat set |
1 x | Round Rod 1,0x1000 mm |
3 x | Raer wall |
1 x | Mini Avanti S Jet, Set conversion turbine(SebART) |
2 x | Servo MKS HBL599 SL |
1 x | ABS Strip 1.0x2.0x1000 mm |
6 x | 1/7 Pilot "Japanese" |
2 x | Pan Head Screw M2x6 PH |
3 x | White aluminium 230 mm landing gear |
1 x | Cross Connector 4.0 mm x 1000 mm |
5 x | Axle for motor A50-L |
2 x | Crystal TX 35.050 Ch 65 |
2 x | Compact Silencer KOLM BX-155 |
4 x | Silicone black 0,75 qmm cable ( 1 m) |
4 x | Civilian pilot "Joe" size 9cm (Slimline) |
3 x | Silicone red 0,75 qmm wire ( 1 m) |
1 x | Prop washer DA-50R/60/70 |
2 x | Crystal TX 35.180 Ch 78 |
2 x | Press fitting for 1,0 diam. steel cable (10 pcs) |
1 x | Flex-headers for Valach VM 85B2-FS |
4 x | Motor A20-22 L EVO |
5 x | 120x60 mm SLH KOVO wheel |
1 x | Stainless steel silencer for DA 150/150L |
3 x | Civilian pilot "Gramps" size 9cm (Slimline) |
4 x | Engine Kolm BX-155-2 with starter |
1 x | Rotorshape Autogyro |
3 x | Carbon fiber rod 20 mmx1000 mm |
4 x | Motor A2212/13T |
2 x | Aluminium wide washer M4 Gold (4 pcs) |
2 x | Shirt Hispano Aviación |
1 x | Air filter MOKI |
1 x | Ignition unit for DA-70/100/120/150/170/200 |
1 x | BABY glider (Aero-naut) |
2 x | L-Connector 1.5 mm x 1000 mm |
4 x | Angle measurer |
1 x | Motor mount class 48" |
2 x | LA500 housing-lower cyclic |
3 x | USB Mini Camera endoscope |
6 x | Carbon fiber rod 3.0 mm x 1000 mm |
2 x | LA500 cyclic central part |
6 x | Head runner |
2 x | 115x29 mm (4.50") Type jets aluminium core wheel |
2 x | Profile ABS triangular 4.0x1000 mm 90º |
3 x | Piloto Jet "Red" 1/6 Scale |
2 x | Servo MKS 6100 DS |
2 x | HAWKER HUNTER 1:5,8 Desert (1.770mm) |
1 x | Nut for mounting M4 (4 pcs) |
1 x | DG-303 ACRO 3750 mm (Airworld) |
2 x | ABS angle 3,0x3,0x1000 mm |
1 x | Screw M2x6 (10 pcs) |
2 x | Streamline Stainless Steel Tubing 7.5x4.5x1000 mm |
2 x | Motor A20-6 XL 10-Pole EVO + 4,4:1 |
1 x | Hexagonal Nut M1 (10 pcs) |
1 x | Fiberglass landing gear for 140-160 |
2 x | M3-M4 rubber washer (8 pcs) |
2 x | Flat washer 1.7 mm (20 pcs) |
3 x | Glases Innovation Plus |
2 x | Strip 2,0x2,0x330 mm |
1 x | ABS rectangular profile 10x5.0x1000 mm |
5 x | Bearings for motors hacker A50 |
2 x | Carbon fiber rod 0.5 mmx1000 mm |
1 x | Front axi for DA85/DA100/DA100L/DA120 |
2 x | 10 mm gas motor standoff |
6 x | Silicone 0,14 qmm servos wire Graupner (100 m) |
3 x | Servo TT ACE SHV 1504 MG |
3 x | ABS "T" angle 8.0x8.0x1000 mm |
1 x | AX-60 starters (5 pcs) |
3 x | Savox Highvoltage Brushless Servo SB-2272MG (Tail rotor) |
1 x | SATORI 2 PRO V C64 F5J |
3 x | Militarian pilot "Kamikaze" size 9cm (Slimline) |
2 x | VAGABOND 1500 mm ARF V2 (Blue) |
1 x | Gracia Maxi ARF, spare wings (Top Model) |
3 x | Savox Highvoltage Brushless Servo SB-2272MG (Tail rotor) |
2 x | Motor DLE 170 cc Twin |
4 x | 1/4 Pilot "Mike" |
2 x | 5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
1 x | Futaba 52 mm servo arm |
1 x | Blade holder center |
1 x | Grafas ARF 3.0 m (Top Model) |
1 x | Q-12 X-light 2000 mm Electric |
2 x | Rubber profile 6-2 mm 2M |
1 x | Carburator spacer block DA-50R |
2 x | Screw M2.5x10 (10 pcs) |
2 x | HITEC DPC-11 programmer |
3 x | Crystal Universal RX 35.020 Ch 62 |
1 x | Pilot "Dick" Legends Series (Slimline) |
3 x | Round Rod 1,5x1000 mm |
3 x | ABS angle 6,0x6,0x1000 mm |
1 x | Gobe R-26S (Airwold) |
5 x | 1/10 Pilot "Jack" |
2 x | ABS angle 4,0x4,0x1000 mm |
3 x | Motor DLE 20 cc |
5 x | PVC 0,08 qmm Graupner servos wire (5 m) |
5 x | METEOR 1.000 mm kit |
2 x | Streamline Stainless Steel Tubing 19.5x9.8x1000 mm |
1 x | BAE HAWK Mini 1.29m RED ARROW ARF +elec.L.Gear + 3 Microservos |
2 x | EXTRA 300L 1.2 m Deep Purple |
6 x | Protective Cover for wires Ø 15 mm 1000 mm |
1 x | X-RAY Micro QR |
1 x | Round Rod 5,0x1000 mm |
3 x | ODYSSEY ARF 2190 mm + Electric Landig Gear,COMBO |
3 x | 6 mm Quick clamp_S (10 pcs) |
6 x | |
1 x | Cockpit plastic closing |
2 x | Bidule 111 3000 mm Canopy |
2 x | Horizontal servo holder |
1 x | Profile ABS half cane 7.0x1000 mm |
3 x | 1/12 Pilot "Tom" |
1 x | Baffles for Radial Moki S180/320 mm |
2 x | Avanti S 1.8m Jet White/Blue + Landing gear |
3 x | MXS-C (Mini) Blue |
3 x | A40 Backmountset complete |
2 x | 30cm Flexible Stainless Steel Exhaust Tubing D=16mm |
3 x | Civilian pilot "G-Man" size 9cm (Slimline) |
3 x | EXTRA 300L 1.2 m Blue |
2 x | Steering arm 12 mm Ø 4 mm |
2 x | Servo Dymond D 37 Eco |
2 x | Silencer with rear exhaust DA-120 |
4 x | Field folding model stand |
2 x | Avanti S 1.8m Jet FREECE TRICOLORI |
3 x | 1/4 Pilot "Heidi" |
4 x | Digital Air Speed Sensor And Pitot Tube Set |
3 x | ABS Strip 1.5x4.0x1000 mm |
3 x | Silicone black 0,75 qmm wire ( 25 m) |
4 x | Canister combo DLE 111 cc |
1 x | 110x55 mm C SLH KOVO wheel |
4 x | CNC FPV Display screen&Transmitter Holder Vertical |
2 x | Blue aluminium double servo arm HITEC 2,5 inch M3 |
2 x | Aluminium wide washer M3 blue (4 pcs) |
3 x | Anodized alum. M4x0,7x20 mm Flat Head screw (4 lilac pcs) |
2 x | U Profile ABS 1,0x2,0x1000 mm |
1 x | Anodized aluminium servo M4x5/8 screw (4 red pcs) |
4 x | Ball joint long |
1 x | Carburetor for DA150L/170 |
3 x | Cierva C30 Elevator |
4 x | Protective Cover for wires Ø 3 mm 1000 mm |
2 x | Mini VISION "spread tow" CFK |
1 x | SERVO DES 588 BB MG |
2 x | Circlik for shaft 1.2 mm (10 pcs) |
3 x | Carbon fiber flat 1000x3.0x1.0 mm |
1 x | Aluminium wide washer M3 gold (4 pcs) |
1 x | Mini neumatic retract 3 mm landing gear (Het-rc) |
3 x | Motor DLE 30 cc V2 |
1 x | Red aluminium double servo arm FUTABA 40 mm M3 F3A |
3 x | ODYSSEY Blue FANTASY ARF 2190 mm |
3 x | Screw-lock pushrod conn snap Ø 1.5 mm (2 uds) |
4 x | Xplorer2 anemometro |
4 x | 5 line servos wire black (1 m) |
5 x | Nut M2 securing |
2 x | Futaba 76/92 mm servo pull-pull double arm with ball link HUB Al |
1 x | Glider Ka 7 Red (2540mm) |
2 x | Vest clothes Hispano Aviación |
1 x | Motor mount for 1 m models |
2 x | Blind nut M2 (10 pcs) |
3 x | Electric spoiler 250 mm (2 pcs) |
2 x | Profile ABS triangular 6.0x1000 mm 90º |
2 x | 15 mm floating pad (30 pcs) |
1 x | ESC 40A. Opto starter Kolm |
1 x | ABS angle 5,0x5,0x1000 mm |
2 x | ABS tube 7.0x6.0x1000 mm |
4 x | Horizontal cockpit anchor "tipe F3A" (2 pcs) |
7 x | Cable servo PREMIUM 1 m (blanco/rojo/negro) AWG21 + AWG26 TPE |
1 x | Ø 40 mm fiberglass motor-holder for electric motors |
1 x | DJI Mavic Air Fly More Combo |
1 x | Servo M2x9/16 screw (4 pcs) |
2 x | Electric coversion set |
1 x | Stainless steel cable Ø 0.62 mm (10 m) |
2 x | Cable video GoPro |
1 x | Quicklock washer 3.5 mm (10 pcs) |
1 x | Futaba BLS255/272/471SV - Gear Set |
1 x | Motor DLE 35 RA |
2 x | Tape GFK 38 mm |
1 x | Red aluminium servo arm V1-Futaba 17 mm M2 |
1 x | ROBIN S50E BLUE/WHITE |
2 x | Motor B50-10L Competition + 6,7:1 |
2 x | SERVO S9177SV HV S-Bus2 Programable |
1 x | ABS tube 5.0x3.0x1000 mm |
2 x | Carbon fiber flat 1000x3.0x0.13 mm |
2 x | Tape GFK 25 mm |
3 x | AX-60 starters (5 pcs) |
1 x | Hose connector stopper 4 mm |
1 x | SAGITA Alsema 4.0 m |
2 x | Carbon fiber rod 1.5 mm x 1000 mm |
2 x | U Profile ABS 3,0x6,0x1000 mm |
3 x | Round Rod 1,25x1000 mm |
2 x | Hitec 30 mm servo rounded arm |
1 x | White smoke bombs AX-9 (10 pcs) |
2 x | Charger LiPo Charger4 |
1 x | 12 mm floating pad (49 pcs) |
2 x | ABS tube 4.0x2.0x1000 mm |
2 x | 7 Servo SET 9g DS MG + Full servo extension cable set for Avanti |
3 x | Zurich Sport Sunglasse Dark Sensity MAGENTA Glasses |
2 x | Rubber profile 10-2 mm 2M |
4 x | Charger Li Polymer Multi-Cell Multi-Rate Charger (MCMR) |
2 x | Surface Indicator Gauge Small |
1 x | Landing gear Rocket 400 |
2 x | Circlik for shaft 1.9 mm (10 pcs) |
1 x | Kit wheel loader 966G II without electrics, without hydrauli |
2 x | 160 mm carbon undercarriage (2pcs) |
2 x | Motor A10-7 L 4,4:1 |
2 x | Savox Brushless Servo SC-1251 MG |
5 x | Blades 330mm |
2 x | ABS tube 16.0x14.0x1000 mm |
1 x | Double aluminium servo arm V1-Futaba 2,5 inch M3 (red) |
3 x | ASPIRE Blue ARF 2.000 mm |
2 x | U Profile ABS 2,0x4,0x1000 mm |
2 x | Gear for D 54 |
1 x | SE Ring 250 mm (2 pcs) |
1 x | ABS tube 9.0x8.0x1000 mm |
1 x | Stainless Steel Muffler D.A. 35-70 |
2 x | Selfstarr EME35 |
1 x | Transmitter Cadet 4Ch (V3) 2,4 GHz Mod.2 |
3 x | Motor DLE 55 RA |
4 x | Steering lever |
1 x | Piston ring for DA-50R and DA-100 |
2 x | Blue aluminium servo arm V3-Hitec 1,5inch M3 |
1 x | Anodized aluminium servo M4x5/8 screw (4 lilac pcs) |
1 x | Motor A40-10 L V2 14-Pole Glider |
2 x | Streamline Stainless Steel Tubing 17.8x12.4x1000 mm |
4 x | Civilian pilot "Curt" size 9cm (Slimline) |
2 x | 10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
6 x | P 17×5.8 Prop-2PCS/PAIR |
4 x | Silicone red 0,75 qmm wire ( 25 m) |
3 x | Pilot "Goose" (Slimline) |
18 x | Avanti S Jet , Carrying bags (SebArt) |
3 x | |
1 x | Pick up DA50/100/150 |
2 x | SE Ring 200 mm (2 pcs) |
2 x | Initior Receiver FRX2 Wireless |
1 x | Canopy F9F Panther (Aero-naut) |
2 x | Futaba BLS152 - Upper Case |
1 x | Cylinder for DA-85/170 (1 piece) |
1 x | Stainless steel flange for VM 60/70/120/140 |
1 x | "S" set for planes |
5 x | Aluminium servo arm (2 uds) |
1 x | Nut for mounting M6 (4 pcs) |
3 x | ABS "T" angle 6.0x6.0x1000 mm |
1 x | Electric Fuel Pump 12V |
2 x | Astra (Top Model) |
1 x | Fox 4000 mm with flaps (Airwold) |
2 x | ABS I Strip 20x10x1000 mm |
4 x | ESC ALPHA 60A HV |
3 x | Motor A30-12 L V4 |
2 x | Fully Threaded Steel Rod SUS303 65 mm M3 (2 pcs) |
4 x | 1/10 Pilot "Jimmy" |
1 x | Size "M" motor holder for class 600 |
3 x | Electric Landing Gear ASPIRE |
1 x | SAVOX SH 0254 servo |
1 x | AC-10 pre-rotacion with motor |
6 x | T-Motor U7-V2.0 Kv420 |
3 x | Truck-trailer for gliders 720 x 285 mm |
2 x | Red aluminium servo arm V2-Futaba 1,5" inch M3 |
1 x | Steel tube (L 1000 mm Ø4 mm, Ø3,7 mm) |
1 x | Chili F3K 2 wing servo mounted |
3 x | Stainless steel cable Ø 0.5 mm (20 m) |
2 x | Profile ABS Square 1 x 1000 mm |
1 x | Screw M2x8 (10 pcs) |
1 x | Mini AVANTI S Jet , Carrying bags (SebArt) |
1 x | Fokker DR-I 2400 mm (CY model) |
3 x | Quicklock washer 1 mm (10 pcs) |
4 x | Metal gear set for HS85MG/5085MG |
1 x | 46 mm Futaba servo arm tandem with ball link |
1 x | SE Ring 350 mm (2 pcs) |
1 x | Piston ring EME 35cc |
3 x | Crystal TX 35.150 Ch 75 |
1 x | Spinner 100 mm GFK |
1 x | Fox 4000 mm (Airwold) |
2 x | Streamline Stainless Steel Tubing 9.0x5.0x1000 mm |
1 x | Hitec 38 mm servo arm |
2 x | Carbon tube (L 1000 mm, Ø16 mm, Ø14 mm) |
2 x | Green smoke canister 65 g |
2 x | Servos security connector (2 pcs) |
2 x | 4 mm M3 red control terminal (4 pcs) |
2 x | BULLIT Wing 840 mm |
1 x | Tapping Screw M2.2x9.5 (10 pcs) |
2 x | X-RAY Micro QR (Fuselage with canopy) |
1 x | EDGE 540-A 91" (2310 mm) |
2 x | Electric spoiler 300 mm (2 pcs) |
2 x | |
3 x | Swift ARF 2000 mm Red (Hacker Model) |
1 x | VALACH VM 85 B2-FS |
3 x | Fully Threaded Steel Rod M2,5 (2 uds) |
1 x | Antiaircraft gun 10.5 cm (2 pcs) |
1 x | Nylon Screw M4x20 |
1 x | Split M1,2x10 (10 pcs) |
4 x | Blade holder upper |
2 x | Profile ABS half cane 2.5x1000 mm |
5 x | Balls 4 mm |
1 x | Lock nut M5 (10 pcs) |
3 x | Pilatus PC-21 + LG.2100 mm RED/WHITE (SebArt) |
1 x | SU 29S 140 carbon landing gear |
1 x | Pan Head Screw M2x8 PH |
2 x | Glases Moritz |
3 x | Lock washer 2.7 mm (20 pcs) |
1 x | Ventus 2cx 4.5 m |
2 x | Mini AVANTI S Jet , L.Gear Electric (SebArt) |
1 x | Lunak ARF 2000 mm Yellow (Hacker Model) |
2 x | Crystal Universal RX 35.170 Ch 77 |
1 x | Pinion 15 - 3,2 mm |
1 x | Futaba 20 mm servo arm |
2 x | ABS Strip 1.5x8.0x1000 mm |
1 x | Motor mount for 1200 mm models |
1 x | JM electric Pump |
1 x | Carb Carrier, red DA-150L/170 |
1 x | Hexagonal Nut M3 (10 pcs) |
2 x | TS832 to Gopro AV/Power Cable |
3 x | Piloto Jet "Green" 1/6 Scale |
2 x | SERVO DES 806 Pignons |
1 x | Motor EME 70 cc with autostarter |
2 x | Tape GFK 50 mm |
3 x | Dust collector for mould cleaning |
1 x | Steel tube (L 1000 mm Ø9 mm, Ø8,7 mm) |
1 x | Futaba 14/20 mm servo pull-pull double arm with ball link |
2 x | Screw-lock connector Ø 2 mm (2 uds) |
2 x | Smoke set "S" |
2 x | Profile ABS half cane 6.0x1000 mm |
3 x | Stainless steel cable Ø 0.5 mm (10 m) |
1 x | Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs) |
1 x | Landing gear retract neumatic (Jet Legend) |
2 x | Propeller APC 11x8 Electric |
1 x | Propeller APC 12x6 SF |
2 x | Aluminium cap bolt washer M3 green (8 pcs) |
2 x | ASW 20 5000 mm with winglets (Airwold) |
1 x | Screw M2.5x5 (10 pcs) |
2 x | Aluminium cap bolt washer M4 red (8 pcs) |
2 x | ABS tube 20.0x18.0x1000 mm |
1 x | Steel tube (L 1000 mm Ø8 mm, Ø7,7 mm) |
1 x | Motor A20-20 L EVO |
2 x | Carbon fiber rod 2.0 mmx1000 mm |
2 x | Locking cable tie 3.2x142 (uds) |
3 x | ABS Strip 1.0x5.0x1000 mm |
1 x | Tap FESTO 6-6 mm |
2 x | Streamline Stainless Steel Tubing 6.3x3.5x1000 mm |
3 x | PCARD Wireless System |
3 x | Quadcopter Q50 Kit Carbon Fiber |
2 x | Aluminun wheel collar 3 mm Ø (4 uds) |
1 x | Pinion 09 - 2 mm |
1 x | Tool for entel |
2 x | L-Connector 4.0 mm x 1000 mm |
1 x | Tapping Screw M2.9x9.5 (10 pcs) |
2 x | Strip ABS 2.0x5.0x1000 mm |
2 x | Lock washer 2.2 mm (20 pcs) |
1 x | Mini neumatic retract 4 mm landing gear (Het-rc) |
2 x | Carbon tube (L 1000 mm, Ø1.5 mm, Ø0.7 mm) |
2 x | Plastic caps for AIR BURTS (30 pcs) |
1 x | Futaba S9650/9670SV - Upper Case |
3 x | DUPLEX R12 receiver REX Assist |
2 x | AXI 2814/12 V2 |
2 x | Blade holder lower |
1 x | AXI 2814/16 V2 Long |
1 x | Crystal TX 35.100 Ch 70 |
2 x | Propeller APC 11x7 SF |
2 x | Propeller APC 10x3,8 SF Electric Pusher |
2 x | 18m Fitting barb |
3 x | LA500 Blades |
5 x | Parachute BACKUP X100 |
3 x | Blade holder metal LAMA |
2 x | Propeller APC 10x4.7 SF Pusher |
1 x | Flat washer 2.2 mm (20 pcs) |
1 x | Aluminium Hub for folding Props 37 mm M8 Shaft 5 mm |
1 x | Dean "T" - Futaba Adapter |
1 x | Red aluminium servo arm V1-Futaba 1,0" inch M2 |
3 x | CRACK YAK (Mini) 600 mm |
1 x | ABS tube 12.0x10.0x1000 mm |
1 x | Aluminium Hub for folding Props 43 mm M8 Shaft 5 mm |
3 x | 165 mm PVC transparent battery termo-retract 165 mm (1 m) |
1 x | DPS Switch JR/JR |
2 x | Plasti Dip Liquid Tape 429 ml orange |
1 x | aluminium servo arm V1-JR 1,0 inch M2 |
1 x | Spinner propeller pleg. 30 mm / 3,2 mm |
1 x | 165 mm PVC transparent battery termo-retract 165 mm (10 m) |
1 x | 19 mm 2:1 black termoretract tube |
2 x | Walnut wood slat 2.0x2.0x1000 mm |
1 x | SE Ring HACKER 300 mm (2 pcs) |
6 x | Wing OXY 0,5 pulgadas2 |
1 x | Oracover Black 2 m |
1 x | Marker ties (20 pcs) |
1 x | M3 Maxi ball link (2 uds) |
1 x | Electronic fog horn |
1 x | Balsa panel 1.5x100x1000 mm |
1 x | M2,5 Diam metal ball link V3 (2 pcs) |
1 x | Birch plywood plate 600x300x4.0 mm |
1 x | Servoholder Dymond DS 1800 MG Digital (2 pcs) |
1 x | Boat with oars 110 mm |
1 x | M3/5Diam metal ball link V3 (2 pcs) |
1 x | AXI 2826/12 V2 |
1 x | Painting GHT Lexan Black 150 ml |
3 x | Breatex™ Non-woven absorber 150 g/m² Roll 5 m |
1 x | Propeller APC 12x8 Electric |
1 x | AXI 2814/10 V2 |
1 x | 2,4x1000 mm 2:1 black termoretract tube |
1 x | Futaba 38 mm servo arm |
1 x | Silicone red 6,0 qmm wire ( 1 m) |
1 x | Aluminium cap bolt washer M3 black (8 pcs) |
2 x | Car Charger DC/DS-16 |
1 x | 26x18 BIELA propeller |
1 x | 3,2 mm Prop Adapter M6 |
2 x | 3 blades set |
1 x | Rigid coupling brass Ø 4 mm L: 25 mm |
1 x | 36 mm red plastic spinner for fixed propeller |
2 x | Ply-Span 450x600/13g Black |
3 x | Avanti XS Jet , Exhaust for JetCat P-60/P-140 (SebArt) |
1 x | Teflon rollers 80 mm x 15 mm Diam. |
1 x | Pin type hinge Al 4,5x70 mm demount (2 pcs) |
1 x | Ventral support for AX-18/AX-60 |
1 x | Anchor of tow Met. 60 mm |
2 x | Intairco CMB Super Filter - 6mm Barb |
2 x | Lite Plywood panel 600x300x2.0 mm |
3 x | Gates hinge black 30x16 mm (2 pcs) |
1 x | Gear carbonite set HITEC HS-6965 |
1 x | Metalic motor holder for class 550-600 |
1 x | Micro Tarjeta SD Rapid Rush 16 GB |
1 x | Profile ABS Square 4 x 1000 mm |
1 x | Blade Holder Full (4 blades) |
2 x | AXI 2204 Multicopter |
4 x | Propeller POWER-PROP 7x7 |
5 x | LUCAS pilot ARTF |
1 x | Extension S-Bus 1-2 silicon 30 cm FUTABA |
1 x | LH long aluminium horn L31xH30 (2pcs) |
2 x | Flap hinge (6 pcs) |
1 x | Blue aluminium servo arm V3-Hitec 1,0inch M3 |
1 x | Xoar Electric Beechwood Prop 22x10 |
2 x | 48 mm cylidric hinge Ø 2,5 mm (5 pcs) |
2 x | Balsa panel 10x100x1000 mm |
3 x | Parachute PV6 for F3J |
3 x | 25 mm fenders (10 pcs) |
1 x | 30 cm BEC cable (female) |
1 x | Propeller Pleg CAM Carbon 12x8 |
2 x | Ferrita 14x8x5.5 mm |
2 x | ABS angle 10,0x10,0x1000 mm |
2 x | PIX Hawk with accesories |
1 x | Round Rod 6,0x1000 mm |
1 x | Propeller APC 10x6 Electric Pusher |
1 x | TeXtreme® Carbon tape 38 g/m² (IM, unidirectional) 20 mm x 100m |
2 x | Anchor 25 mm (2 uds) |
1 x | Railing Ø 2mm (20 pcs) |
3 x | Axle for motor A30-XL V2 |
1 x | Conector JR Servo male (10 pcs) |
1 x | Aluminun wheel collar 2.5 mm Ø (4 uds) |
6 x | Parachute P4 |
5 x | Set cintas unión paracaídas 145 cm |
1 x | Connectors DEANS (T) |
1 x | AXI 2820/12 V2 Long |
2 x | Silent-blocks DLE 170M |
3 x | 90x60 mm standart servo cover |
1 x | Plasti Dip Liquid Tape 429 ml black |
1 x | Futaba 30 mm servo rounded arm |
2 x | Catalog AERO-NAUT 2016 |
1 x | AXI 2826/10 V2 Long |
1 x | Esc MasterBasic 40SB |
4 x | PVC 0,25 qmm 4 line servos wire JR/Graupner (5 m) |
1 x | Allen wheel collar M3x5 |
2 x | PYRO 800-48 Long Axi |
2 x | Cable coupler M3 (10 uds) |
1 x | White spinner propeller pleg. 42 mm / 5 mm |
1 x | Anodized aluminium servo M4x5/8 screw (4 blue pcs) |
1 x | Transmitter Crystal 35 Mc/s Ch 77 |
1 x | Short ball link M2 (6 uds) |
2 x | LH long black aluminium horn L31xH30 (2pcs) |
1 x | Aluminium cap bolt washer M3 blue (8 pcs) |
4 x | Bags de Luxe ULTIMATUM 2.0 |
5 x | Gates hinge aluminium (1 pcs) |
4 x | White silicone 0,25 mm² wire (25 m) |
1 x | Spinner fold propeller 36 mm (white spare spinner) |
3 x | Cylidric hinge 33 mm Ø 2 mm (5 pcs) |
3 x | 28 mm turnbuckle |
2 x | Hardener Aero EPH 161 (250 g) |
3 x | LA500 rotor head shaft |
3 x | Double conector with JR adapter and 200 mm extension |
3 x | Aluminium blue ball links M3 V1 (10 pcs) |
2 x | RX TARANIS V8FR-II HV 2.4 GHz |
2 x | Oratex White 2m |
1 x | Battery LiPo GENS 5300 mAh 4S 14.8V 30C (Gens Ace) |
1 x | Set cables carga (Mini-JST, JST, XT60, Dean, EC3, TRX, Micro-T, |
2 x | 20 g tin paste |
2 x | 38x4,5 mm wires output (2 pcs) |
1 x | Socket head long ball link M3 (6 uds) |
2 x | Silicone black 0,5 qmm wire ( 25 m) |
1 x | Propeller Pleg CAM Carbon 12x6.5 |
1 x | Fully Threaded Steel Rod alumin 60 mm M2,5 (2 pcs) |
1 x | Propeller CFK 14.5x10 Slim |
2 x | Metal clevis M2,5 (10 uds) |
2 x | AXI 2814/16 V2 |
2 x | Motor B20-10 L + 4:1 gearbox |
4 x | Birch plywood plate 600x300x3.0 mm |
3 x | HAWKER HUNTER 1:5,8 (1.770mm) |
3 x | Digital precision scale up to 2000 g |
2 x | 101x28 mm (4.0") Type jets aluminium core wheel |
1 x | DUPLEX 2,4EX Stick with Potentiometer for Transmitter DC/DS |
1 x | ALMIRALSANKER anchor 40 mm (2 uds) |
1 x | Spinner propeller pleg. 30mm axle 3,0 mm |
1 x | 16x10 tree blades propeller Master Airscrew |
1 x | 13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
1 x | Brass control horn M2 long for wire (10pcs) |
1 x | Wheel Ø 75 mm (1 ud) Electron Retracts |
1 x | 3,2x1000 mm 2:1 red termoretract tube |
1 x | ABS 500 x 400 x 1 mm (white) |
1 x | PHASOR RACE 2035/4100 1D |
3 x | Rigid coupling brass Ø 5.0 / 4.0 mm L: 25 mm |
2 x | TMM 1210-3S heli |
1 x | Suport PITOT |
2 x | A/C quality beech plywood 600x300x1.5 mm |
1 x | Small aluminium horn blue (2pcs) |
1 x | Propeller RABOESCH M5 65 mm (4 Blades) (Right hydropropeller) |
1 x | Long ball link M1.6 (6 uds) |
1 x | LA-7 2134 mm(CY model) |
2 x | XH 30 cm Female extension 0,25 mm2 silicone cable for 2 cell |
1 x | Aero-Master Fuselage (Aero-naut) |
1 x | Red aluminium servo arm V2-Futaba 1,75" inch M3 |
1 x | 20,5x14,5 Falcon electric V2 (40 g) |
1 x | PT 21x13 EL Propeller |
2 x | Anchor 25 mm (2 uds) |
1 x | Propeller APC 11x4.7 SF |
1 x | 100 mm rods set for direction control |
1 x | Spinner fold propeller 38 mm (white spare spinner) |
3 x | Rescue 1,8m2 / BackPack |
1 x | Red aluminium servo arm V3-Futaba 3,5inch |
3 x | Boat 43 mm (5 pcs) |
2 x | Extra Hard Titanium Herxagon Screwdrivers |
1 x | Spark plug cap DLE 55 / CM6 |
1 x | 55% silver electrodes (2 pcs) |
1 x | Steel Screw M1x8 (10 pcs) |
1 x | Connectors banna oro 4 mm (M/F) |
2 x | Propeller RABOESCH.Ms 20mm/M3r 5-BL (rigth hydropropeller) |
1 x | Epoxy 40 min (Resin). 5 Kg |
2 x | T-shape holder metal LAMA |
2 x | Epoxy Resin HT 2 + Hardener HT 2 (60 min) 1 kg |
1 x | Q80-14XS F3A |
2 x | Servo SAVOX SV-1270 TG |
1 x | Extension silicon 50 cm (Graupner) |
1 x | XPower H PROP HUB Ø5.0/20mm +2,5° |
1 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m |
3 x | Female connector for 12 pines AWG |
5 x | Trike XL motor set (motor+esc+prop) |
1 x | Connectors banna oro 0,8 mm (M/F) |
1 x | Z type of cable coupler Ø 1.8 (2 uds) |
4 x | Para-RC Trike "RC-Bullix" |
1 x | Spinner propeller pleg. 38 mm / 3,17 mm |
3 x | Carburetor DLE 170 |
2 x | Albatros ,spare fuselage (Top Model) |
3 x | A50 Backmountset complete |
1 x | Heat-conducting adhesive (2x2ml), WLK DK 4 |
1 x | Propeller Pleg CAM Carbon 16x6 |
2 x | BALSA trip 5.0x5.0x1000 mm |
2 x | Motor A50-12 L V4 |
1 x | P-51D "Blondie" 89" (2260 mm) |
1 x | Propeller Pleg CAM Carbon 15x6 |
3 x | T-Motor MN705-S Kv125 (pack 2 uds) |
1 x | Connectors DEANS (T) micro |
3 x | Silicone red 0,25 mm² wire (25 m) |
2 x | Skyray (RBC Kits) |
2 x | KIRA 500-26 6,7:1 |
1 x | AXI 2826/6 V2 Long |
1 x | Aluminun wheel collar 4 mm Ø (4 uds) |
1 x | 6 mm blue aluminium threaded horn with patella |
1 x | ER-40eVo Set B [Complet Set + GS200] |
2 x | Head lower part |
3 x | Male connector for 16 pines AWG |
1 x | CC 11 Conector |
2 x | KIRA 480-43 |
2 x | Walnut wood slat 1.5x1.5x1000 mm |
1 x | Steering arm 16 mm Ø 3 mm (2 uds) |
1 x | Motor DLE 170 M- Paramotors |
3 x | DC-3 Douglas (DAKOTA) 1800 mm |
1 x | Spare white 36-38 mm spinner |
1 x | Profile ABS Square 2 x 1000 mm |
4 x | 1 m servo "Premium" wire (white/red/blue) |
2 x | Motor Set CHALLENGER Indoor |
1 x | 76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs) |
2 x | 3,9 mm ZG20-ZG38 servo arm |
1 x | Blind nut M6 (4 pcs) |
1 x | Blue aluminium servo arm V1-Hitec 1,5" inch M3 |
1 x | Anodized alum. M4x0,7x25 mm Button Head screw (4 blue pcs) |
1 x | XT-90 connector (pair) |
1 x | Propeller Pleg CAM Carbon 15x10 |
2 x | "L" servo arm 65x49 mm (2 pcs) |
1 x | Smoke set "M" |
1 x | 14 mm portholes (10 pcs) |
1 x | Paint gun for sprays |
1 x | 39,0 mm propeller (left propeller) |
3 x | A60-6XS V4 28-Pole |
1 x | 12,7x1000 mm 2:1 green termoretract tube |
4 x | Para-RC Mix |
1 x | Rigid coupling brass Ø 4.0 / 2.3 mm L: 20 mm |
1 x | Monokote PLATINO metalizado (1.8x0.65m) |
1 x | Capstan of plastic 91x44x45 mm |
1 x | Propeller 10x4,7 SlowFlyer |
1 x | servo adapter lead, JST-SH socket - JR male Pin, for GR-12SH+HoT |
1 x | Thinwall Stainless Steel Tubing 28x0.6x1000 mm |
1 x | Central piece 42 mm + 2,5º |
2 x | TopFuel LiPo 35C-POWER-X 2400mAh 2S |
1 x | ABS I Strip 10x5x1000 mm |
2 x | Pilatus PC-21 50E, GLOW set conversion (SebArt) |
1 x | Muffler DLE-120 Right |
1 x | Spinner propeller pleg. 30 mm / 5,0 mm |
2 x | Carbon servo arms for HITEC HS 65 (4 pcs) |
1 x | Central support Speed 600 |
2 x | A30-M/L/XL Backmountset complete |
1 x | Motor A200-8 |
1 x | Spinner propeller pleg. 40 mm / 6 mm |
1 x | 290 mm 290 mm M5x18 mm shaft ship |
1 x | Anodized aluminium M3x0,5x20 mm Sokect Head screw (4 lilac pcs) |
2 x | Threaded coupler ALU M2,5 Ø 6 (2 uds) |
1 x | Motor mount EDGE 540 48" |
2 x | 12 mm mast holder |
1 x | Dean-T Plug Mold |
5 x | Paramotor Trike XL |
1 x | MB339 Mini 1.45m Frecce TRICOLORI ARF +elec.L.Gear + 3 Microser |
1 x | Cockpit metalic closing |
2 x | Propeller electric carbon 10.5x6 |
2 x | TX 250 mW especial GOPRO |
1 x | Long pinned hinge (6 uds) |
2 x | Mini AVANTI S EDF 80MM RTF Combo Lipos 5000-6s (SebART) |
2 x | Axi for motor A40-L Motor 8-Pole-Electric Turbine |
1 x | HPP-21 PLUS PC Programmer for Hitec Digital Servos |
1 x | Fresa corte diamante Ø 2.35mm (flame) |
1 x | Spinner propeller pleg. 36 mm/6,0 mm/5º |
2 x | Disipador para motor Hacker B 20 (or motors up to Ø20 mm) |
1 x | White smoke bombs AX-18 (5 pcs) |
2 x | Avia spare blue cockpit (Top Model) |
1 x | Frontal support Speed 400/480 |
3 x | 30 mm Alu spinner 3 mm pleg. propeller |
2 x | Towing hook <3m |
1 x | SERVO DES 707 BB MG |
1 x | Central piece 72 mm 0º |
2 x | quality beech plywood BIRCH 600x300x2.0 mm |
2 x | Silicone black 0,5 qmm wire ( 1 m) |
1 x | Avanti S 2.3m Jet YELLOW/BLACK & retract (SebArt) |
2 x | Rigid coupling brass Ø 3 mm L: 20 mm |
1 x | Servo Tester |
1 x | Red aluminium double servo arm FUTABA 2,5inch M3 |
1 x | Oracover Verde 2 m |
2 x | 11 mm wing servo holder |
3 x | Dumper propeller 6/8 mm |
2 x | Cable set PREMIUM, SUB-Done 4three fuselage/wing 160 cm |
2 x | Epoxy 40 min (Hardener). 1 Kg |
3 x | PPM Encoder Module |
3 x | Couple M4 for wire (10 pcs) |
1 x | Plasti Dip Liquid Tape 429 ml black |
1 x | 50 mm white plastic spinner for folding propeller |
1 x | Propeller CFK 16x17 |
1 x | LA500 Autogyro |
1 x | Spinner propeller pleg. 40 mm / 2,0 mm |
1 x | Metal clevis M2 (10 uds) |
1 x | Propeller APC 13x10 Electric |
1 x | SAVOX SH 0255 MG servo |
1 x | LA500 rotor head core |
1 x | Propeller APC 11x7 Electric |
3 x | 50x45 mm micro-mini servo cover |
1 x | 0,14 mm PVC servo wire extension, ZH micro conector. |
1 x | Central piece 47 mm - 5º |
1 x | Spinner 3BL propeller pleg. 36 mm / 5,0 mm |
2 x | 4 blades set |
4 x | Fast attachment for servos (25 pcs) |
1 x | Indoor hinge with servo arm integraded |
1 x | Tray JETI for DS-14/16/24 Black |
1 x | Propeller Pleg CAM Carbon 10x8 |
1 x | Strut M 1:32 3D (30 pcs) |
2 x | Hinge 4x14 mm (20 pcs) |
1 x | Propeller CFK 23x12 |
1 x | Ring support P-20 OPUS V-Jet 60mm |
1 x | Bags wings/rudder ODYSSEY |
1 x | P-51D "Old Crow" 89" (2260 mm) |
1 x | Propeller APC 14x8.5 Electric |
1 x | Steel tube (L 1000 mm Ø6 mm, Ø5,7 mm) |
2 x | Clevis plastico I=26 mm / hole 2mm / pin 1 (2 pcs) |
2 x | ODYSSEY Red/White ARF 2190 mm |
1 x | Gear set HITEC HS-56 HB |
2 x | Nylon hinge 20x20x0,3 (10 pcs) |
1 x | Alu servo arm double RHINO |
2 x | Aluminium tube (L 1000 mm, Ø4.0 mm, Ø3.1 mm) |
1 x | Motor Mount for Multiplex FunJet |
1 x | AXI 2814/10 V2 Long |
1 x | 140 mm rods + T patellas set for direction control |
1 x | Spinner propeller pleg. 40 mm / 5 mm |
1 x | Cabel "Y" 30 cm (graupner) |
1 x | Oracover White 10 m |
2 x | Ferrita 27x14x7 mm |
1 x | Crimping sleeves for cable 1.3 mm (10 pcs) |
1 x | Extension silicon 25 cm (Futaba) |
2 x | Shaft for A60-L (140mm) |
1 x | Ignition for DA-35 (without pickup sensor) |
2 x | Servo arms set HS-60/81/85/5082MG/5085mg |
1 x | AXI 2820/10 V2 |
1 x | 5 mm M2 variable horn |
1 x | Circlick securite |
1 x | Boat 140 mm |
2 x | MIG 29 EDF |
1 x | P-51D 89", Electric retract Landing gear |
1 x | Sealing Iron Sleeve STD |
4 x | Bearing 3x6x2,5 |
1 x | CF tube (L 1000 mm Ø030 mm, Ø26 mm) |
1 x | Propeller CFK 15x7 |
2 x | Motor A30-12 XL Glider |
1 x | Electric Landing Gear ODYSSEY (Elektron Retracts) |
5 x | CellPRO 4S Adaptader (GP/KO up to 4S) |
1 x | Bidule 55 2460 mm Cabina |
2 x | Demoulding wedge red (40 x 20 mm) 5 pcs |
1 x | Motor B50 19 S & 6.7:1 gearbox |
1 x | 30 cm DEANS female connector |
1 x | 2,4x1000 mm 2:1 green termoretract tube |
1 x | Straightened rod Ø 3.0 mm x 1000 mm |
1 x | Avanti S 2.3m Jet WHITE/BLUE & retract (SebArt) |
2 x | Receiver replacement antenna, approx. 85 |
1 x | Propeller 3x2 |
1 x | Boat 82 mm |
1 x | Short ball link M1.6 (6 uds) |
1 x | TrainerCord (master-learner) |
1 x | Servo HS-5565MH High Voltage |
2 x | Silicone red 1,0 qmm wire ( 1 m) |
1 x | Central piece 42 mm 0º [6 mm] |
2 x | ODYSSEY HONDA ARF 2190 mm |
1 x | Porpeller HUNTER 480 |
1 x | 67 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs) |
2 x | Motor OS 3820-1200 electric |
3 x | Squared carbon wing joinner 5x5x220 mm |
1 x | ABS tube 5.0x4.0x1000 mm |
1 x | Jet Pipe for ASPIRE 2m JMF |
2 x | Horn 16,5x20 mm (2 pcs) |
1 x | 37 mm PVC transparent battery termo-retract (1 m) |
1 x | SSPS105 Super Hi-Power servo |
1 x | AXI 2808/16 V2 |
2 x | Xoar Electric Beechwood Prop 21x10 |
1 x | Futaba Female 40 cm extension |
1 x | Conector JR Servo male (10 pcs) |
2 x | BALSA trip 2.0x2.0x1000 mm |
1 x | Futaba 46 mm servo arm with ball link |
1 x | Propeller CFK 14x8 Slim |
1 x | Propeller APC 10x4.5 MR |
1 x | Para-RC "RC-Evo-Cross" Rescue |
1 x | Propeller CFK 16x16 Slim |
1 x | Spare Shaft Ø6mm L:450mm M5 |
1 x | ORACOVER Ferrari red (2 m) |
2 x | ABS angle 2,0x2,0x1000 mm |
2 x | ODYSSEY Yellow FANTASY ARF 2190 mm |
1 x | Hot Glue Stick RED |
1 x | Shaft sleeve LAMA |
2 x | Bidule 55 V3 2460 mm |
2 x | TP/TopFuel - XH 2/3S Adapter |
1 x | F9F Panther (Aero-naut) |
1 x | Modulo telemetria 500 mW/100 mw Radio aire/Tierra Modulo 915 MHz |
1 x | White spinner propeller pleg. 55 mm / 5 mm |
1 x | Servo HITEC HS-125 MG |
2 x | Fresa corte diamante Ø 1.4mm (bola) |
1 x | wooden stairs (kit) 70 mm |
1 x | Ferrita 17x10x6.5 mm |
1 x | Carbon Non-Woven, 240 g/m² 100 cm x 20 m |
5 x | Silicone 0,35 qmm servos wire Graupner(100 m) |
1 x | Propeller RF CFK 14.5x14 |
2 x | Cable silicona macho batt. receptor 30 cm (Futaba) |
1 x | Spinner propeller pleg. 30 mm / 5,0 mm |
1 x | Motor DLE 430 cc - Paramotors |
3 x | Glases Aspen |
1 x | Horn 6/27 with M3 Bearing |
1 x | HPP-21 PLUS PC Programmer for Hitec Digital Servos |
1 x | Silicone black 4,0 qmm wire (25 m) |
1 x | Buy Perforated film 100 cm / 50 m |
1 x | U Profile ABS 8,0x4,0x1000 mm |
3 x | BALSA trip 4.0x4.0x1000 mm |
1 x | Esc MasterSPIN 16 Pro |
1 x | Propeller CFK 15x13 |
1 x | AXI 2217/20 V2 |
2 x | Buy Perforated film 100 cm / 20 m |
3 x | Electric Landing Gear ULTIMATUM 2.0 (Elektron Retracts) |
1 x | Propeller balancer |
3 x | Silicone 0,50 qmm servos wire Graupner(100 m) |
4 x | Windsock Ozone L - 700 mm |
1 x | Pine wood slat 10x10x1000 mm |
2 x | Xplorer3 anemometro |
3 x | PVC 0,08 qmm Futaba servos wire (5 m) |
1 x | Threaded coupler ALU M2 Ø 4 (2 uds) |
1 x | Gear set HITEC HS-7950TH |
3 x | Adjustable launching hook |
1 x | Spinner propeller pleg. 30 mm / 3,0 mm |
2 x | Mini AVANTI S EDF 80MM RTF |
1 x | DUPLEX 2.4 EX MBar |
1 x | CC 05 |
2 x | VIPER 1.7 Electric break wheels + structure |
1 x | AXI 2814/20 V2 |
4 x | Wing OXY 5,0 m2 |
1 x | Set propellers 8x4.5 SF Carbon Multicopter (1x R - 1x L) |
1 x | Servo HITEC HS-311 |
3 x | Coupling bush 5 - 5 mm |
2 x | Propeller hub spacer 8/5.5 |
1 x | 127x43 Ø6.0 mm aluminium core wheel |
1 x | Motor RACE 20 Navy 12v |
1 x | Propeller CFK 12.5x6.5 |
1 x | White spinner propeller pleg. 55 mm / 6 mm |
1 x | Aluminium cap bolt washer M3 red (8 pcs) |
2 x | Wing-connector: Glass / Carbon tube (13.7/12.5) x 1000 mm |
1 x | PYRO 700-45 Long Axi |
1 x | Ball link M3 (6 uds) |
1 x | Electric Landing Gear ODYSSEY |
1 x | Futaba Multi-Switch-Prop 12+2 DECODER |
1 x | Crystal Universal RX 35.150 Ch 75 |
3 x | Foreman, scale 1:32 |
2 x | Strip 2,5x1,25x330 mm |
1 x | Horn with ball 55x40 |
2 x | Cabin latch Fox MDM1 4m (pair) |
1 x | Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm) |
1 x | Carbon fiber rod 10 mm x 1000 mm |
1 x | Propeller APC 10x10 Electric |
2 x | Locking cable tie 2.5x100 (uds) |
4 x | Paramotor BackPack XXS (without accessories) |
2 x | Kwik link AL Ø2 mm L:23 mm (2 pcs) + Pin Ø 1,6 mm |
1 x | Filter KingTech |
3 x | Angle of incidence meter |
4 x | Paramotor BackPack XXS 2 |
1 x | Propeller Pleg CAM Carbon 13x8 |
1 x | Propeller mounting nuts Black / Silver Rocket 400 or Phatom simi |
2 x | ABS "T" angle 4.0x4.0x1000 mm |
2 x | Oracover CARBON Metalic 1 m |
2 x | Aluminium coupler M2,5/2 with ball bearing (1 pcs) |
1 x | Anodized alum. M3x0,5x20 mm Flat Head screw (4 blue pcs) |
1 x | XH/XH 30 cm Female extension 0,25 mm2 silicone cable for 2 cell |
1 x | Propeller CFK 12.75x13 |
1 x | Propeller Pleg CAM Carbon 16x10 |
2 x | Axle for motor A20-S (3 uds) |
1 x | Brass control horn M4 short for wire (4 pcs) |
1 x | Manual Controller |
2 x | 25,0 mm 3-BL M4 hydro-propeller (left hydropropeller) |
1 x | Thixotropic agent TM 100, tin/ 75 g (approx. 1 l) |
1 x | Oracover Yellow CUB 2 m |
2 x | Aramid 50 daN 50 m |
2 x | Motor A50-14 L 8-Polos Electric turbine |
1 x | 1,2x1000 mm 2:1 black termoretract tube |
2 x | Towing hook |
2 x | Spinner propeller pleg. 30 mm / 4,0 mm |
1 x | Coversion set HIROBO EX/EAGLE elektro |
1 x | Propeller POWER-PROP 9x5 |
1 x | Universal Colour Paste deep black 250 g |
1 x | Spare white 38-45 mm spinner |
3 x | Beech dowels 3.0 x 1000 mm |
2 x | Xplorer1 anemometro |
1 x | 1000 cc gasoline fuel tank complet |
1 x | Oracover Green10 m |
2 x | Silicone red 1,5 qmm wire ( 1 m) |
1 x | Epoxy 40 min (Resin). 25Kg |
1 x | Propeller APC 13x8 Electric |
2 x | Extinguisher CO2 - 2 Kg |
1 x | Profile ABS half cane 4x1000 mm |
1 x | White large kwik link (10 pcs) |
1 x | Crimping sleeves for 1.1 mm cable (10 pcs) |
1 x | Hitec 46 mm servo arm with ball link |
2 x | Propeller electric carbon 6x5 |
1 x | Fresa corte diamante Ø 1.0mm (bola) |
1 x | ALU servo arm 3 mm shaft |
2 x | Servo HITEC HS-53 |
1 x | Servo HITEC HS-5685MH |
2 x | Aluminum Fold Prop Spinner 30 mm / 3.17 mm |
1 x | Dremel PERMAGRIT thin lime |
1 x | AXI 2217/16 V2 Long |
2 x | Nylon hinge for flaps/gates 27x10,5 (2 pcs) |
1 x | LA500 freewheel bearing |
1 x | Blue aluminium servo arm V2-Hitec 1,25 inch M3 |
2 x | Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 15 m |
3 x | SUPER DIMONA TC-80 |
1 x | 68 mm PVC transparent battery termo-retract 68 mm (1 m) |
1 x | LA-7 Electric Landing gear complet (CY model) |
1 x | Propeller Pleg CAM Carbon 13x5 |
1 x | KIRA 480-43 5,2:1 |
1 x | M2,5 5Diam metal ball link V3 (2 pcs) |
2 x | Pilot LA 500 |
1 x | DRIVE 510 (KIRA 480-34 5,2:1 + Koby 55 LV) |
3 x | Balanceradapter JST-XH (Heli 47G) 2-6 c. |
2 x | Motor 2212 (1000KV) Quadcopter F450 |
1 x | Spinner Alumin. propeller pleg. 30 mm / 2,3 mm |
3 x | 1/12 Pilot "Fighter" |
1 x | 290x4 mm M4 shaft ship |
2 x | Cable coupler M2,5 (2 pcs) |
1 x | Rudder 2_Tray 4.5~5 inch |
1 x | 100g Flux Paste for Silver Solder |
1 x | Joint with bearing M3 22x5,5 |
1 x | Profile ABS half cane 2.0x1000 mm |
2 x | BALSA trip 3.0x3.0x1000 mm |
1 x | BULLIT Wing 1095 mm |
3 x | Connector CAN 15 |
1 x | 12.7 mm 2:1 black termoretract tube |
1 x | F-104 Starfighter USAF (SebArt) |
1 x | Propeller POWER-PROP 15x10 |
2 x | Long ball link M3 (6 uds) |
1 x | Propeller Pleg CAM Carbon 11x6 |
2 x | Nylon hinge 20x15x0,3 (10 pcs) |
1 x | Gold aluminium double servo arm JR/Graupner 40 mm M3 F3A |
1 x | Cable grommet Ø 3.2 mm (4 uds) |
1 x | Central piece 52 mm + 5º |
1 x | Propeller Pleg CAM Carbon 10x4 |
2 x | Tail tube RAINBOW |
1 x | Fiberglass motor-holder for electric motors |
1 x | Monokote ROJO misil (1.8x0.65m) |
3 x | Protective Cover for wires Ø 10 mm 1000 mm |
1 x | LO 100 Scale 1:2 - Modellbau Bruckmann |
3 x | Black silicone 0,25 mm² wire (25 m) |
1 x | Propeller Pleg CAM Carbon 14x12 |
1 x | Propeller CFK 15.5x10 |
1 x | AXI 2808/24 V2 Long |
1 x | Futaba 2x20 mm servo double arm |
1 x | Hopper 125 ml INTAIRCO |
1 x | Propeller electric carbon 9.5x6 |
1 x | KIRA 500-36 6,7:1 |
1 x | Flat washer 4.3 mm (20 pcs) |
2 x | Ball link V1 Ø7 M4/3 (6 uds) |
1 x | Size "M" motor holder for class 400 |
1 x | Streamline Stainless Steel Tubing 14.5x9.6x1000 mm |
2 x | Head core bushing |
3 x | 40,0 mm hydro-propeller (left hydropropeller) |
1 x | CORTEX |
2 x | ASPIRE Red ARF 2.000 mm |
1 x | Aluminium wide washer M3 red (4 pcs) |
1 x | AXI 2820/14 V2 Long |
2 x | Miss ULTIMATE 50E Red/Black |
1 x | LA500 housing-upper cyclic |
1 x | Socket head ball link M3 (2 uds) |
2 x | Ferrita con funda |
3 x | Buy Perforated film 145 cm / 50 m |
1 x | de Havilland Vampire (Rc Factory) |
1 x | Horn with ball 40x30 |
1 x | Yellow silicone 0,5 qmm wire (50 m) |
1 x | Short adjustable control horn 3x24 |
2 x | Carburetor DLE 30 |
1 x | Propeller MEJZLIK 20x10 Electric light (36 g) |
1 x | Spinner propeller pleg. 38 mm / 5 mm |
1 x | PYRO 750-50L |
2 x | Hot Glue Stick BLACK |
1 x | Steering arm 12 mm Ø 4 mm (2 uds) |
2 x | Female connector for 20 pines AWG |
1 x | Propeller Pleg CAM Carbon 12x9 |
1 x | Aluminum Fold Prop Spinner 34 mm / 3 mm |
1 x | PYRO 600-12 |
2 x | 57 mm micro-mini servo cover |
1 x | Duralumium F3A horn 30x10x23,5 mm (2 pcs) |
1 x | Stainless steel cable Ø 0.88 mm - 60 kp (10 m) |
1 x | Starter 12v (Max 90 and 15ccm) |
1 x | Rigid coupling brass Ø 3.0 / 2.3 mm L: 20 mm |
3 x | Spinner Alumin. propeller pleg. 30 mm / 4,0 mm |
1 x | SlowFlyer control horn (3 pcs) |
1 x | Cabling for Fox MDM1 wings |
2 x | Servo HITEC HS-225 BB |
2 x | ODYSSEY Blue ARF 2190 mm |
1 x | Round Rod 2,5x1000 mm |
1 x | Anchor 80 mm (2 uds) |
1 x | AXI 2808/20 V2 Long |
2 x | Silicon black 2,5 qmm cable ( 25 m) |
1 x | U Profile ABS 5,0x10,0x1000 mm |
1 x | Aluminum Fold Prop Spinner 40 mm / 5mm |
2 x | Ball Link Plier |
1 x | 3,2x1000 mm 2:1 black termoretract tube |
2 x | Balsa panel 2.0x100x1000 mm |
2 x | Threaded coupler ALU M3 Ø 6 (2 uds) |
1 x | Threaded coupler M2 (10 uds) |
1 x | Extension silicon 30 cm female (Futaba) |
1 x | 3,2 mm Prop Adapter M6 |
1 x | Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm) |
1 x | CN-Spinner propeller pleg. 36 mm / 6 mm |
1 x | Z type of cable coupler Ø 1 (2 uds) |
1 x | Servo HITEC HS-5805 MG Digi |
2 x | La Capitania di Venetia 1:50 |
2 x | Motor A20-20 L EVO |
1 x | Spinner propeller pleg. 30 mm / 3,2 mm |
1 x | Spinner propeller pleg. 40 mm / 3,2 mm |
1 x | Aluminun wheel collar 2 mm Ø (4 uds) |
1 x | Remote electric ignition system |
1 x | Universal Colour Paste white 50 g |
1 x | A/C quality beech plywood 600x300x0.8 mm |
1 x | Porpeller HUNTER 400 |
2 x | Capstan of plastic 125x72x45 mm |
1 x | 6 mm M3 variable horn |
3 x | Pilatus PC-21 2100 mm RED/WHITE (SebArt) |
2 x | Motor Eachine Racer 250 Brushless Motor - BG2204 2300kv - CCW th |
1 x | Swicht F14/FC-16 (3 pos) |
1 x | Tank + hopper Kevlar ASPIRE 6 L Kero |
2 x | Silicone black 6,0 qmm wire (25 m) |
1 x | Long ball link M2 (6 uds) |
1 x | A60 Motor Mount Alu complete set |
1 x | FESTO connector 1/8 Quick 6mm 90º |
1 x | PowerBox Competition |
1 x | silicon 100 cm Futaba Extension Ø 0,35 mm |
1 x | ABS tube 3.0x2.0x1000 mm |
2 x | Propeller APC 14x5.5 MR Electric Pusher |
2 x | SCHARNHORST Battleship 1:200 |
1 x | Blind nut M6 (4 pcs) |
1 x | 28x10 BIELA propeller |
1 x | entral piece 3Bl 42 mm 0º |
1 x | Switch for DC: Long 3 Position |
1 x | Conector FUTABA Servo male BLUE silicon (10 pcs) |
1 x | One touch canopy lock |
1 x | Balsa panel 1.0x100x1000 mm |
1 x | Servo HS-5765MH High Voltage |
2 x | Nose OPTIMA 2.200 mm (Elec or Glider) |
2 x | Extension S-Bus 1-2 silicon 120 cm FUTABA |
1 x | Spinner Alumin. propeller pleg. 40 mm / 4,0 mm |
1 x | Balsa panel 5.0x100x1000 mm |
1 x | Propeller POWER-PROP 15x8 |
1 x | KIRA 480-34 |
1 x | Propeller CFK 17x13 |
1 x | Motor B50-9L Competition + 6,7:1 |
1 x | Propeller APC 11x10 Electric |
2 x | F-16 Scale 1:6 (1.630mm) |
1 x | Extension PVC 150 cm (Graupner) |
1 x | 10 mm dogdrive props |
2 x | PC-6 Pilatus Porter Big "Fredi" (PICHLER) |
2 x | Servo HITEC HS-56 BB |
1 x | Prop Shaft Adapter 5 mm/M8 "long" |
2 x | Tube bender |
1 x | MIG 29 3D RTF Red Start SET + Gyro |
4 x | Black spiral protective cover for wires Ø 0,5/50 mm - 25 m |
1 x | Gear set HITEC HS-65 HB |
1 x | Propeller APC 11x4.5 Electric Pusher |
1 x | Steering arm 16 mm Ø 4 mm (2 uds) |
1 x | Spikes Band (5 m) |
3 x | Gold aluminium servo arm V2-JR 1,0" inch M3 |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø25 mm, Ø22.5 mm) |
1 x | PropCover 16-20" (2 pcs) |
1 x | STANDOFF GAS ENGINE MOUNT 38 mm |
1 x | 135 mm PVC transparent battery termo-retract 68 mm (1 m) |
1 x | Class 30, Red wheel pants (SebART) |
1 x | Aluminun wheel collar 5 mm Ø (4 uds) |
1 x | Spinner propeller pleg. 40 mm / 5,0 mm |
1 x | 270 mm 3/3 mm shaft ship |
1 x | DYNAMOMETER S-1580 |
3 x | Carbon fiber flat 1000x3.0x0.5 mm |
2 x | Receiver DUPLEX R4H EX 2.4 GHz |
1 x | MB339 Mini 1.45m White/Orange ARF +elec.L.Gear + 3 Microser |
2 x | PYRO 800-40 Long Axi |
2 x | Bearings for motor HACKER C50 |
1 x | 250 mm / 16 mm Airbrakes |
2 x | 38 mm fenders (10 pcs) |
1 x | Oracover Yellow CADMIO 2 m |
2 x | Universal Colour Paste signal white (RAL 9003) 1 Kg |
1 x | Spinner propeller pleg. 36 mm/6,0 mm/0º |
1 x | Set propellers 10x4.5 SF Carbon Multicopter |
2 x | 1/6 Pilot "Buddy" |
1 x | MPX-Dean "T" Adapter |
2 x | ARAMID honeycomb 1300x2600x2 mm |
1 x | Propeller MEJZLIK 21x10 Electric light (36 g) |
2 x | Carbon fiber rod 14 mmx1000 mm |
1 x | Central support Speed 280 |
1 x | F-104 Starfighter Y/B Aniversary(SebArt) |
1 x | 6 mm M3 variable inclined horn |
1 x | XH 30 cm Male extension 0,25 mm2 silicone cable for 4 cell |
1 x | Motor A40-10S V4 14-Pole |
2 x | 5 LiPo XH>EH adapter |
1 x | Propeller CFK 13x9 |
1 x | LiPo TopFuel ECO-X 3000 mAh 3s 20C MTAG |
1 x | 5.8G Receiver Helical Antenna with protecting case (SMA plug) 12 |
1 x | Fan for A60 |
2 x | Silicone black 2,5 qmm wire ( 1 m) |
1 x | M2,5 Diam metal short ball link V3 (2 pcs) |
1 x | Oils Pumps Empty (1 liter) |
1 x | Red aluminium servo arm V2-Futaba 1,0" inch M3 |
1 x | Servo HITEC HS-5485 HB Digi |
1 x | ASPIRE Red ARF 2.000 mm, Fuselage |
2 x | Glases Flitemaster |
2 x | Kwik link AL M3 L:40 mm (2 pcs) + Pin Ø 2,5 mm |
1 x | JETImodel SINGLE BEC |
1 x | Propeller CFK 16x16 Wide |
1 x | Carbon rectangular rod 3.0 mm x 1.0 x 1000 mm |
2 x | Aluminum Bayonet / strongal D12 mm / 0.5 m |
1 x | XH 30 cm Female extension 0,25 mm2 silicone cable for 4 cell |
1 x | CM-3 |
1 x | Pump 12 V |
1 x | Racor 4/4 mm |
1 x | Unmounted aluminium pin 6x98 mm (2 pcs) |
2 x | Blade holder center GFK 0,5 mm |
1 x | 12x8 tree blades propeller |
1 x | ABS tube 18.0x16.0x1000 mm |
1 x | Propeller MEJZLIK 20x13 Electric light (41 g) |
2 x | Propadapter for motor A50-V3 |
1 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m |
1 x | OPUS-V / Jet-CC-BF |
1 x | Streamline Stainless Steel Tubing 10.5x5.7x1000 m |
2 x | Ply-Span 450x600/13g Yellow |
1 x | Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH |
1 x | Servo HITEC HS-645 MG |
1 x | Conector FUTABA Servo female (10 pcs) |
1 x | Quicklock washer 2.5 mm (10 pcs) |
1 x | La Capitania di Venetia accesories |
1 x | Extension silicon 35 cm (Futaba) |
1 x | M2,5 5Diam black ball link V2 (2 pcs) |
1 x | EC5-Set female, simple quality, 2 x female pin, 1 x blue housing |
2 x | Aluminium sheet 500x250x0,5mm |
2 x | 25,0 mm 3-BL M4 hydro-propeller (rigth hydropropeller) |
1 x | Copier 2x20 cm pcs |
1 x | Blue Aluminium lock nut M2 (4 pcs) |
1 x | 152x46 Ø6.0 mm aluminium core wheel |
1 x | Propeller POWER-PROP 11x8 |
1 x | Propeller APC 10x4.7 |
2 x | 18 mm wing servo holder |
1 x | 11 mm Rubber pads (14 pcs) |
1 x | M3 black washers (4 pcs) |
1 x | MYLAR film A350 (1000x500 mm) |
1 x | Hitec 38 mm servo arm with ball link |
2 x | Spinner propeller pleg. 30 mm / 4,0 mm |
1 x | Threaded coupler Micro M2 Ø 0,8 (10 pcs) |
2 x | Hinges 7x12 mm (20 pcs) |
1 x | Blue aluminium servo arm V1-Hitec 1,0" inch M2 |
1 x | Bearing housing |
1 x | Servo HITEC HS-5125 MG Slim Metal Gear Wing Servo |
1 x | Hitec 25 mm servo arm with M3 ball link |
1 x | Savox HV Brushless Servo SB-2270SG (Swashplate) |
1 x | 9x4.7 * 22x12 carbon propeller |
1 x | Rudder 2_Tray 3.5~4 inch |
1 x | Threaded coupler ALU M3 Ø 4 (2 uds) |
1 x | MEKP Harderner 100 g |
2 x | Strip ABS 2.0x8.0x1000 mm |
1 x | ORACOVER transparent Yellow (10 m) |
2 x | Lite Plywood panel 600x300x3.0 mm |
2 x | Motor A40-14 L 14-Pole V4 |
1 x | ABS 500 x 400 x 0,5 mm (white) |
1 x | Crimping tool |
4 x | Piston ring for DLE-20 RA |
2 x | Sandpaper file 13 mm |
1 x | Oracover Red 2 m |
1 x | Threaded coupler M2,5 Ø 2 mm (10 pcs) |
1 x | DPSI Micro SingleBat 5.9V/7.2V F3A Edition magnetic switch |
2 x | Epoxy Casting Resin + Hardener "water-clear" (300 min) |
1 x | Hacker A30-S Radial Set |
1 x | 6,4x1000 mm 2:1 red termoretract tube |
1 x | Propeller POWER-PROP 14x12 |
1 x | 45 mm white plastic spinner for folding propeller |
2 x | Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH |
1 x | FAN KOSMIK |
1 x | Propeller CFK 14x6.5 |
1 x | Servo HITEC HS-5085 MG Digi |
4 x | DC-3 Douglas (DAKOTA) 1800 mm Electric LG |
2 x | Carbon fiber rod 5.0 mmx1000 mm |
1 x | Blue aluminium servo arm V3-Hitec 1,25inch M3 |
3 x | Swing 1000 |
1 x | Central piece 38 mm 0º |
1 x | M2/M1/6 3Diam short black ball link V1 (6 pcs) |
1 x | Spinner propeller pleg. 32 mm / 5,0 mm |
1 x | Rotorshape Elevator |
1 x | Racor 3/3 mm |
2 x | Heli blades angle measurer |
1 x | 6 mm aluminium horn with patella |
1 x | Central piece 52 mm - 2,5º |
1 x | Clip mini fixing for wing (2 pcs) |
1 x | USBCOM 5i |
1 x | Spray Graphit 33 |
1 x | Rudder 2_Tray 3~3.5 inch |
1 x | Propeller electric carbon 6.5x4 |
1 x | Spinner propeller pleg. 40 mm / 3,0 mm |
1 x | Q80-8M V2 |
2 x | Carbon Non-Woven, 160 g/m² 127 cm 5m |
1 x | PHASOR RACE 2035/2100 2D |
2 x | HAWKER HUNTER 1:5,8, Electric retract landing gear |
1 x | Wing connector 8pin with pin strip, plug & socket |
2 x | Ball Bearings for motor A60-V2 |
1 x | Cinta Goldfix 1m |
1 x | Connectors banna oro 4 mm (M/F) (ultralight) |
1 x | BALSA triangular 15x15x1000 mm |
2 x | Propeller POWER-PROP 12x9 |
1 x | Black smoke bombs AX-60 (5 pcs) |
2 x | Steel tube (L 1000 mm Ø5 mm, Ø4,7 mm) |
3 x | Cable coupler M2 (10 uds) |
1 x | Extension silicon 100 cm (Futaba) |
1 x | SIMtransmitter 6 Mode 2 |
1 x | 1804 2400KV Brushless Motor Qav 250 mini |
2 x | Rotorhead pushrod |
1 x | Propeller APC 11x5.5 Electric Pusher |
1 x | M2,5 5Diam short black ball link V2 (2 pcs) |
2 x | XH 30 cm Male extension 0,25 mm2 silicone cable for 2 cell |
1 x | Motor B20-18 L + 4:1 gearbox |
1 x | AXI 2826/8 V2 |
1 x | Hardener Aero EPH 161 (500 g) |
2 x | TP/TopFuel - JST-EH 4/5S Adapter |
2 x | Ply-Span 450x600/13g White |
1 x | Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH |
2 x | Oracover Orange 2 m |
1 x | Savox Brushless Servo SB-2271SG |
3 x | Nylon hinge 15x0,3 (10 pcs) |
1 x | DUPLEX 2.4EX RC Power Switch 10 |
1 x | ABS tube 3.0x2.0x330 mm |
1 x | ODYSSEY Yellow ARF 2190 mm |
1 x | 33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs) |
1 x | 4,8x1000 mm 2:1 black termoretract tube |
2 x | Big Crow DLE-170M |
2 x | Filler Gauges |
1 x | Esc MasterSPIN 100 Pro |
1 x | Cabel "Y" 30 cm (Futaba) |
1 x | Monokote BLANCO jet (1.8x0.65m) |
2 x | Beech dowels 4.0 x 1000 mm |
1 x | Round Rod 4,0x1000 mm |
1 x | AXI 2212/12 V2 |
1 x | Q80-11S 28-Pole F3A |
1 x | Hopper 125 ml XICOY |
1 x | MAX pilot ARTF |
2 x | PT 20x13 EL Propeller |
1 x | Wood anchor 30 mm (2 uds) |
1 x | Silicone red 4,0 qmm wire ( 1 m) |
1 x | Alu-Cross for Backmount of A60-V2-Backmountmotors |
1 x | 2 mm Prop Adapter M6 |
1 x | Vertical mounting servo holder |
1 x | Race Outboard MERCURY type A |
1 x | 20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø20 mm, Ø18 mm) |
1 x | AXI 2212/20 V2 |
2 x | Spinner Alumin. propeller pleg. 30 mm / 5,0 mm |
2 x | Servo TOPMODEL DS9010 T |
2 x | Medium pin type hinge (12 uds) |
1 x | Male connector for 20 pines AWG |
1 x | Servo HITEC HS-5084 MG |
1 x | Tank Kevlar ASPIRE 6 L Kero |
3 x | 25 mm carbon servo arm |
2 x | F9F COUGAR Red ARF 1.562 mm |
1 x | Banna gold connector 2,5 mm (M/F) |
1 x | Carbon Non-crimp ST 200 g/m² 50 cm x 20 m |
2 x | Truck-trailer for gliders 720 x 239 mm |
1 x | 36 mm white plastic spinner for fixed propeller |
1 x | Brass control horn M4 short for wire (10pcs) |
1 x | Cooler motor type 400 |
1 x | Rudder 107-06 |
1 x | KIRA 480-38 5,2:1 |
2 x | DLE 55 RA pipe plug |
1 x | ABS "T" angle 10.0x10.0x1000 mm |
2 x | Concave-Convex sandpaper file 13 mm |
1 x | 43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs) |
1 x | SE Ring 330 mm (4 pcs) |
1 x | Battery LiPo TATTU 1800 mAh 4S 14.8V 75C |
2 x | 21x12D BIELA propeller (3-blades) |
2 x | Spinner Alumin. propeller pleg. 40 mm / 5,0 mm |
1 x | Electric spoiler 440 mm (2 pcs) |
1 x | Propeller Pleg CAM Carbon 15x13 |
1 x | Central piece 42 mm - 2,5º |
1 x | Cable grommet Ø 5 mm (4 uds) |
1 x | 42 mm central piece for 4 blades |
1 x | Propeller Pleg CAM Carbon 11x5 |
2 x | Adjustable brass horn threaded M3 |
2 x | M4xM2,5xL30 nylon clevis and arm (10 uds) |
1 x | Propeller CFK 13x7.5 |
1 x | Steel tube (L 1000 mm Ø10 mm, Ø9,7 mm) |
1 x | JETImodel Addcap 1640 |
2 x | Kwik link aluminio IZD. M2.5 L: 23mm (2 uds) pin Ø 1.6 |
4 x | Canopy Sweet / Siesta |
2 x | Carbon fiber flat 1000x6.0x0.8 mm |
2 x | Set transmisions ULTIMATUM 2.0 (stainless/aluminium) |
2 x | ODYSSEY Navy ARF 2190 mm |
2 x | CHALLENGER Indoor |
1 x | aluminium servo arm V2-JR 2,0 inch M3 |
1 x | 20x15 Falcon electric V2 |
1 x | Futaba 25 mm servo arm with M3 ball link |
1 x | Futaba Multi-Switch-Prop 12+2 MODUL |
1 x | Propeller 11x4,7 SlowFlyer |
1 x | Conector JR/Uni Servo male BLUE silicon (10 pcs) |
3 x | Angled clevis with threaded rod M3 |
1 x | Ring 320 mm length (5 pcs) |
1 x | Aluminium wide washer M4 Blue (4 pcs) |
1 x | Propeller CFK 15x16 |
1 x | Baseplate servo |
2 x | Propeller POWER-PROP 10x7 |
1 x | Red aluminium servo arm V1-Futaba 15 mm iM2 |
1 x | Piñon motor rotor LA-500 |
2 x | L cockpit anchor "tipe F3A" (2 pcs) |
2 x | A50 Backmountset complete V3/V4 |
1 x | Pine wood slat 2.0x2.0x1000 mm |
1 x | Red aluminium servo arm V1-Futaba 23 mm M2 |
2 x | ABS "T" angle 2.0x2.0x1000 mm |
1 x | Avanti S 2.3m Jet WHITE/BLUE (SebArt) |
1 x | ESC RAY G2 R-60SB SBEC |
1 x | SyRen 50A 6V-30V Regenerative Motor Driver |
1 x | Propeller RF CFK 10x17 |
1 x | Rigid coupling brass Ø 5 mm L: 25 mm |
1 x | Charging Extension 50cm for 2 Battery |
1 x | KIRA 600-24 6,7:1 |
1 x | Spinner propeller pleg. 40 mm / 5,0 mm |
4 x | PVC 0,14 qmm servos wire Hitec/Mpx (5 m) |
2 x | Shaft for A60-XS-V2 (112,5mm) |
1 x | PVC yellow-orange transparent battery termo-retract 57 mm (1 m) |
2 x | L ELBOW 90º ø 25 mm |
1 x | Intairco CMB Super Filter - 4mm Barb |
1 x | Head core |
1 x | Battery LiPo GENS 4000 mAh 2S 7,4v RX (Gens Ace) |
1 x | Reed valve petal for DLE 120 |
1 x | Spinner 3BL propeller pleg. 36 mm / 4,0 mm |
1 x | Spinner propeller pleg. 30 mm / 2,3 mm |
1 x | FA27.2×8.9 Prop-2PCS/PAIR |
1 x | Propeller Pleg CAM Carbon 12x10 |
1 x | Propeller Pleg CAM Carbon 11x4 |
1 x | Servo Arm aluminium ALU-STAR |
1 x | Spinner propeller pleg. 40 mm / 5,0 mm |
1 x | AXI 2820/8 V2 Long |
2 x | LA500 nose |
1 x | A/C quality beech plywood 600x300x5.0 mm |
1 x | XT-30 connector (pair) |
3 x | Blue aluminium double servo arm V3-Hitec 3,5inch |
1 x | ABS Strip 1.5x6.0x1000 mm |
1 x | PBY 6/6A Catalina, Observer´s dome (L + R) |
1 x | Servo FUTABA S 3072 HV S-Bus |
1 x | Black copper lacquer wire Ø0,2 mm (5 m) |
2 x | Avia (Top Model) |
2 x | Threaded coupler ALU M2,5 Ø 4 (2 uds) |
1 x | ABS tube 14.0x10.0x1000 mm |
2 x | 20x200 mm battery rings |
1 x | Size "M" motor holder for class 400 |
2 x | 8x6 tree blades propeller |
1 x | Blue metalic ball link M3/3 azul (2 pcs) |
1 x | Cable silicona female batt. receptor 30 cm (Futaba) |
2 x | Silicone 0,35 qmm servos cable Futaba (5 m) |
2 x | Aluminium Hub for folding Props 55 mm M8 Shaft 6 mm |
1 x | Propeller Pleg CAM Carbon 15x8 |
1 x | Ball link M3 RPA's-UAV's |
1 x | 4 mm Prop Adapter M8 |
2 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m |
1 x | Circlik for shaft 2.3 mm (10 pcs) |
1 x | Rudder 2_Tray 4~4.5 inch |
2 x | Mahogany wood slat 1.5x1.5x1000 mm |
2 x | Carbon Non-crimp ST 200 g/m² 50 cm x 5 m |
1 x | Aluminium cap bolt washer M4 green (8 pcs) |
1 x | XT-60 connector (male) |
1 x | M2 5Diam short black ball link V2 (2 pcs) |
2 x | Servo DITEX TD2612S |
1 x | Propeller APC 10x4.7 SF |
1 x | Propeller APC 10x7 SF |
1 x | Propeller 3BL 50 mm M4 Plastic |
1 x | P-51D "Gunfighter" 89" (2260 mm) |
2 x | KIRA 600-38 6,7:1 |
1 x | Propeller APC 15x4 Electric |
1 x | 3-Blade Spinner 85 x 80 mm GFK |
1 x | Propeller Pleg CAM Carbon 13x11 |
2 x | Circlick securite |
1 x | Propeller set 400 (2R+2L) |
2 x | Fixed launching hook |
1 x | Straightened rod Ø 5.0 mm x 1000 mm |
1 x | Servo inverter |
1 x | Frontal support Speed 600 |
1 x | Propeller RF CFK 16x8,5 S |
1 x | 170x54 mm SLH KOVO wheel with bearing and metal hub |
1 x | Spare white 30-36 mm spinner |
2 x | OBECHI sheet 2.0x3.0x1000 mm |
2 x | Avanti S 1.8m Jet FREECE TRICOLORI + Landing gear |
1 x | Combo 4 pcs AXI 2204 Multicopter |
2 x | A40-10S V2 8-Pole + 6,7:1 PG |
1 x | Spinner propeller pleg. 40 mm / 5,0 mm |
2 x | Anchor 50 mm (2 uds) |
1 x | A/C quality beech plywood BIRCH 600x300x1.0 mm |
2 x | 31,0 mm propeller (rigth propeller) |
2 x | Threaded coupler ALU Left M2,5 Ø 4 (2 uds) |
2 x | Motor A30-14 L V4 |
1 x | Brass rod Ø 0.5 mm x 1000 mm |
3 x | Miss ULTIMATE 50E Yellow/Black |
1 x | Propadapter for motor A50 |
1 x | 290 mm M5 Prop shaft |
1 x | "Y" charging 4mm wire (2 IN-1 OUT). |
1 x | Motor A30-14 M V2 6 Poles |
2 x | Pin type hinge Al 3,0x50 mm (2 pcs) |
1 x | Central piece 47 mm - 2,5º |
1 x | 22 mm Cut Disc Proxxon/Dremmel |
1 x | Propeller Pleg CAM-Prop 10x6 + Spinner |
1 x | Carbon Non-crimp ST 200 g/m² 50 cm x 10 m |
1 x | Horn 5/15 with M2 Bearing |
1 x | Spinner propeller pleg. 38 mm / 5,0 mm |
2 x | Tank Kevlar ASPIRE 4 L Kero / 1.5 L Smoke |
1 x | ALU servo arm 90º 3 mm shaft |
2 x | Turbine KingTech K30G Restart |
2 x | Servo arms set HS-65HB/MG/5065MG |
1 x | Silicone black 4,0 qmm wire ( 1 m) |
1 x | 25 mm reinforced hinge |
1 x | Gear set HITEC HS-225 |
1 x | Starter Sullivan-STAR 601 |
2 x | A50 Backmountset complete |
1 x | Electric Landing Gear ASPIRE (Elektron Retracts) |
2 x | Silicone black 1,0 qmm wire (100 m) |
2 x | Opale Rucksack |
1 x | SE Ring 450 mm (2 pcs) |
2 x | Carbon fiber rod 0.5 mmx1000 mm |
1 x | Fuselage Autogyro RAINBOW |
1 x | Micro screw-lock pushrod conn snap Ø 1 mm (2 uds) |
1 x | Kwik link AL M3 con Clip (2 pcs) |
1 x | Balsa panel 4.0x100x1000 mm |
1 x | Propeller APC 12x3.8 SF |
1 x | Profile ABS triangular 2.0x1000 mm 90º |
1 x | Heli blades angle measurer |
2 x | Flybar support metal LAMA |
1 x | Parachute XTRALITE S |
1 x | Epoxy L 40 min. 10 kg (Resin) |
1 x | 89 mm double servo arm with bearing (2 pcs) |
1 x | Spinner 4BL 4 blades pleg. prop 40 mm / 4,0 mm |
1 x | XH 30 cm Male extension 0,25 mm2 silicone cable for 3 cell |
1 x | Spinner Alumin. propeller pleg. 40 mm / 3,0 mm |
1 x | Antena FUTABA 35 mhZ 3PM/3FRF/4V/4Y/6EX/6X/6Y/7C |
1 x | Indoor motor holder |
1 x | 5 mm Prop Adapter CN-Spinner |
1 x | Aluminium tube (L 1000 mm, Ø5.0 mm, Ø4.1 mm) |
1 x | Ball Link Plier |
1 x | 40 mm servo arm with bearing (2 pcs) |
1 x | Flat washer 3.2 mm (20 pcs) |
1 x | White silicone 0,25 qmm wire (150 m) |
1 x | Set propellers 5x3 Multicopter (2cw+2ccw) |
1 x | 21x14 Falcon electric carbon prop (64 g) |
1 x | Fiberglass motor-holder for electric motors |
1 x | ABS tube 10.0x8.0x1000 mm |
1 x | Connectors MPX female (PIN double) |
3 x | Contest-S-Pult-Carbon mc-20/mc-24 |
1 x | Propeller electric carbon 10x8 |
2 x | Pilot "Anthony" (Slimline) |
1 x | Servo HITEC HS-635HB Carbonite |
3 x | Servos wing assembly set HS 80/81/82/85 |
1 x | Spannlack 1000 ml |
2 x | Central piece 62 mm 0º |
1 x | 2 piece mounting frame |
2 x | Fast'n EZ-CA-Hinge (12 uds) |
1 x | AXI 2820/10 V2 Long |
1 x | Servo HITEC HS-5585MH |
2 x | Small pinned hinge (12 uds) |
1 x | AXI 2217/20 V2 Long "F5J" |
1 x | ABS tube 4.0x3.0x1000 mm |
1 x | Aluminium wide washer M4 Black (4 pcs) |
2 x | 1000 ml sealer (DOPE) |
2 x | Focke Wulf FW-190A-8 93" (2362 mm) |
2 x | Quicklock washer 2 mm (10 pcs) |
2 x | XH female balance (4S) connector (2 pcs) |
1 x | Horn 13,5x16 mm (2 pcs) |
2 x | Battery plate |
1 x | Threaded coupler ALU Left M2,5 Ø 3 (2 uds) |
1 x | Connectors banna oro 2 mm (M/F) (ultralight) |
3 x | VIPER 1.7 Tailpipe + Fuel Tank 1500ml |
1 x | 290 mm M4/M4 6.0x4.0 mm shaft ship |
2 x | Propeller CFK 12.5x7 |
1 x | Propeller MEJZLIK 22x10 Electric light (36 g) |
1 x | Spinner propeller pleg. 30 mm / 3,17 mm |
1 x | Servo HITEC HS-5625 MG Digi |
3 x | Wheel keeper washer |
1 x | 30 cm BEC cable (male) |
1 x | Sanyo Eneloop AAA 1,2 V battery 800 mAh |
1 x | Extension silicon 75 cm (Futaba) |
1 x | Steering arm 16 mm Ø 3 mm |
1 x | Propeller CFK 18x17 |
1 x | Crystal Universal RX 35.090 Ch 69 |
1 x | M3 Maxi ball link (2 uds) |
1 x | Vertical cockpit anchor "tipe F3A" (2 pcs) |
1 x | Oracover Azul 2 m |
1 x | KIRA 600-17 |
1 x | 120x60 mm C SLH KOVO wheel |
1 x | AXI 2820/12 V2 |
2 x | 7 mm gas motor standoff |
1 x | Servo holder for retract |
2 x | Silicone red 1,5 qmm wire ( 25 m) |
3 x | Cable coupler M3 (10 uds) |
1 x | 90 mm rods + T patellas set for direction control |
1 x | Savox HV Brushless Servo SB-2270SG (Swashplate) |
1 x | Spinner propeller pleg. 40 mm / 3,17 mm |
1 x | Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs) |
2 x | Railing L250 mm (10 pcs) |
1 x | Connectors MPX black female |
3 x | Cylynder DLE 20-RA |
1 x | 280 cc gasoline fuel tank complet |
1 x | Servo RHINO pro SHV digi 4 |
1 x | Xoar Electric Beechwood Prop 12x6 |
1 x | Red aluminium servo arm V2-Futaba 2,0 inch |
1 x | Spinner propeller pleg. 36 mm/6,0 mm/0º |
2 x | DINO Glider ARC |
1 x | Connectors DEANS 4 pins (1 pair) |
2 x | 1/6 Pilot "Cindy" |
1 x | Propeller CFK 20x13 |
1 x | Propeller 9x4,7 SlowFlyer |
1 x | Lock washer 4.3 mm (20 pcs) |
1 x | AXI 2814/12 V2 Long |
1 x | M3 INDUSTRIAL ball link (2 uds) |
1 x | Profile ABS half cane 5.0x1000 mm |
1 x | Male connector for 12 pines AWG |
1 x | Ply-Span 450x600/13g Orange |
1 x | Propeller RF CFK 13x7 |
1 x | 20x13 Falcon electric carbon prop (64g) |
2 x | Propeller POWER-PROP 10x6 |
1 x | Strip 3,5x1,75x330 mm |
1 x | Pin type hinge Al 4,5x70 mm to wire (2 pcs) |
1 x | M2/M1/6 3Diam short black ball link V1 (2 pcs) |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø12 mm, Ø8 mm) |
1 x | Epoxy Resin L 285 + Hardener 285 (Aero), kit/ 1 kg |
1 x | 102 mm aluminium spinner |
1 x | 67 mm cylidric hinge Ø 4,5 mm (5 pcs) |
1 x | Spinner propeller pleg. 38 mm / 6,0 mm |
1 x | Aluminun wheel collar 3.5 mm Ø (4 uds) |
1 x | Mini Avanti S 1.4m blue/white/red CLASSIC |
1 x | 14x60 mm Mini rings Tie Wraps (4 pcs) |
2 x | Avanti S 1.8m Jet White/Blue |
4 x | Stickers-digit for marking |
1 x | Propeller CFK 12X6 |
3 x | Motor A50-12 L Glider |
1 x | Spinner Alumin. propeller pleg. 30 mm / 3,0 mm |
1 x | Disposable Injector Bags (30x16cm) 100 pcs |
2 x | Threaded coupler ALU M2,5 Ø 3 (2 uds) |
1 x | Spray EC Red 400ml |
2 x | Brass rod Ø 1.0 mm x 1000 mm |
3 x | Spring clamp for tube Ø29 mm ext 1pc |
1 x | Spinner 3BL propeller pleg. 36 mm / 6,0 mm |
1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m |
2 x | 15x7 tree blades propeller |
1 x | XH male balance (3S) connector (2 pcs) |
1 x | resin-hardener package L-385 with hardener H-385 (875 g) |
1 x | KIRA 500-30 6,7:1 |
3 x | ACTIVE ARF Electric 1.995 mm |
1 x | Receiver replacement antenna, approx. 15 |
1 x | 2,4x1000 mm 2:1 red termoretract tube |
1 x | Straightened rod Ø 4.0 mm x 1000 mm |
1 x | 41x5,5 mm wires output (2 pcs) |
1 x | Kwik link unmount tool |
3 x | Servo arms set 40/50/55/5055 MG |
1 x | Red aluminium servo arm V3-Futaba 1,25inch M3 |
1 x | 6,4x1000 mm 2:1 black termoretract tube |
1 x | Servo SAVOX SA-1256 TG |
1 x | Propeller Pleg CAM Carbon 14x10 |
1 x | Transmitter SPEKTRUM DX-9 (Only TX) |
1 x | Giant Scale Muffler D.A. 170 (2 pcs) |
1 x | Battery LiPo GENS 7000 mAh 2S 7.4V 50C (Gens Ace Hard Case) |
1 x | 26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
1 x | Crimping sleeves for cable 0.85 mm (10 pcs) |
2 x | Guide capes 20 mm (2 pcs) |
1 x | DRIVE 550 (KIRA 500-26 6,7:1 + KOBY 55 LV) |
1 x | Carbon fiber rod 6.0 mmx1000 mm |
1 x | Starter Sullivan-STAR 603 DINATRON |
1 x | PYRO 700-45 |
1 x | Esc MasterBasic 90 Opto |
1 x | Epoxy 5 min. 500 g (Resin) |
1 x | Ball link M2,5 (10 pcs) |
1 x | Propeller CFK 18x19 |
1 x | AXI 2820/14 V2 |
1 x | Circlik for shaft 1.5 mm (10 pcs) |
1 x | Stainless steel cable Ø 0.5 mm (2 m) |
1 x | XH male balance (2S) connector (2 pcs) |
1 x | Cierva C30 spanish decoration Stickers |
2 x | 14 mm Portholes for screws (10 pcs) |
2 x | Silicone 0,50 qmm servos wire Graupner(5 m) |
1 x | Spinner 4BL 4 blades pleg. prop 40 mm / 5,0 mm |
1 x | Silicone 0,50 qmm servos wire Futaba (100 m) |
1 x | Profile ABS half cane 4x2.5x1000 mm |
1 x | 700 ml complete glow fuel tank |
1 x | Cables suitable for the motor AC 28/7 |
1 x | Silicone red 4,0 qmm wire (25 m) |
2 x | Linden wood slat 2.0x2.0x1000 mm |
1 x | 50 mm servo arm with bearing (2 pcs) |
1 x | Red copper lacquer wire Ø0,2 mm (5 m) |
1 x | Spinner propeller pleg. 42 mm / 6,0 mm |
2 x | Gates hinge 30x16 mm (2 pcs) |
1 x | 800TVL CMOS camera for FPV |
1 x | Conector Servo female 4 pines |
1 x | Avanti S Jet, Kerosene+Smoke Tank(SebART) |
1 x | Propeller CFK 14x8 |
1 x | Anntena Panel 5,8 GHz - 14 dBi |
1 x | 1,5x50 mm allen screwdriver |
1 x | Blind nut M5 (4 pcs) |
1 x | Bags de Luxe ASPIRE |
2 x | 500 ml sealer (DOPE) |
1 x | Spinner propeller pleg. 38 mm/6,0 mm/0º |
1 x | Racor "Y" 3 mm |
2 x | Silicone black 6,0 qmm wire ( 1 m) |
2 x | Challenger ARF (Top Model) |
1 x | USB HLS prog. interface |
2 x | Propeller POWER-PROP 12x8 |
1 x | Nylon hinge for flaps 33x9 (2 pcs) |
2 x | Albatros ,spare cockpit (Top Model) |
1 x | Vacuum bag, 1200 mm x 50 m |
2 x | 45 mm rods set for direction control |
1 x | Aluminium rod Ø 4.0 mm x 3000 mm |
1 x | Red aluminium servo arm V3-Futaba 3-3,5inch |
3 x | Glases Nimbus "Black" |
2 x | Carbon Non-Woven, 160 g/m² 100 cm 5m |
1 x | ULTIMATUM 2.0 m white |
1 x | Balsa panel 3.0x100x1000 mm |
1 x | Carbon fiber rod 4.0 mmx1000 mm |
1 x | Servo HS-5070 MH Hi Volt |
1 x | ASK 21 6.5m + pylona |
1 x | LA500 ciclic lever |
1 x | Avanti S Jet , Field folding model stand (SebArt) |
1 x | 7 Servo SET 9g DS MG + Full servo extension cable set for Avanti |
1 x | AXI 2814/20 V2 Long |
1 x | Metalic nose for PROJETI |
1 x | 12x6 tree blades propeller |
1 x | Futaba 24/30 mm servo pull-pull double arm with ball link |
1 x | KIRA 480-31 5,2:1 |
1 x | Muffler DLE-120 Left |
2 x | Threaded coupler ALU M3 Ø 5 (2 uds) |
1 x | Socket head ball link M3 (2 uds) |
1 x | Horn DUBRO 1/2A |
1 x | 19.5x13 Falcon electric 3-Blade carbon prop (54 g) |
1 x | Canopy Astra |
1 x | Futaba male 40 cm extension |
1 x | Linden wood slat 3.0x3.0x1000 mm |
2 x | Propeller POWER-PROP 13x8 |
1 x | Propeller Pleg CAM Carbon 13x6.5 |
1 x | Epoxy 5 min. 500 g (Hardener) |
1 x | Cable with accesories |
1 x | PYRO 750-50L Competition |
1 x | Propeller 8x4,3 SlowFlyer |
1 x | M2 5Diam black ball link V2 (2 pcs) |
1 x | Silicone black 1,0 qmm wire ( 1 m) |
1 x | Red aluminium servo arm V3-Futaba 1,0inch |
1 x | Grub screw M3x3 shouldered (2 pcs) |
1 x | Red smoke bombs AX-60 (5 pcs) |
1 x | Optotronix Aurora Plug |
1 x | Screw-lock connector M2 (2 uds) |
1 x | Pilatus PC-21 50E, wings carrying bags (SebArt) |
2 x | Motor Eachine Racer 250 Brushless Motor - BG2204 2300kv - CW thr |
1 x | Spinner propeller pleg. 36 mm / 6,0 mm |
1 x | BEC 3A FOXY |
1 x | Carbon tube (L 1000 mm, Ø22 mm, Ø21 mm) |
1 x | Balsa panel 2.5x100x1000 mm |
1 x | Crystal RX 35.120 Ch 72 |
1 x | Shaft for A60-20/22/24S (120 mm) |
1 x | Aluminum Fold Prop Spinner 38 mm / 5 mm |
1 x | Propeller Pleg CAM Carbon 12x5 |
1 x | Quicklock washer 3 mm (10 pcs) |
2 x | Round Rod 3,0x1000 mm |
1 x | Screw M3x16 |
3 x | 40 mm 1/4" Race propeller (rigth hydropropeller) |
1 x | Blue smoke canister 100 g |
1 x | Hitec 20 mm servo arm |
1 x | AXI 2826/10 V2 |
2 x | Avanti S 1.8m Jet FREECE TRICOLORI |
1 x | Extension 100 cm (Futaba) |
1 x | Mahogany wood slat 3.0x3.0x1000 mm |
1 x | Transmitter Crystal 35 Mc/s Ch 62 |
1 x | L ELBOW 90º ø 25 mm |
3 x | Kwik link AL M3 L:30 mm (2 pcs) + Pin Ø 1,6 mm |
1 x | Round flex hinge (12 uds) |
1 x | Female connector for 16 pines AWG |
1 x | Spinner propeller pleg. 45 mm / 6,0 mm "Z" |
1 x | Motor 2212 (1000KV) Quadcopter F450 |
1 x | Vacuum pump P1-N |
1 x | resin-hardener L-385 H-385 (1250 g) |
1 x | Canadair CL-415 (aero-naut) |
1 x | LA500 tail empennage |
1 x | SE Ring 400 mm (2 pcs) |
1 x | Carbon blade 3D 230 mm |
1 x | Anodized aluminium M3x0,5x20 mm Sokect Head screw (4 blue pcs) |
1 x | Silicone black 1,5 qmm wire ( 1 m) |
1 x | 58 mm PVC transparent battery termo-retract 68 mm (1 m) |
1 x | Extension silicon 30 cm male (Graupner) |
1 x | Liferaft 47 mm |
2 x | Hot Glue Stick GREEN |
1 x | Me-163 |
1 x | Radial heatsink for MPJ AC25/35-xx motor |
1 x | AXI 2808/16 V2 Long |
2 x | Aero-Master Cabine (Aero-naut) |
1 x | Crystal TX 35.010 Ch 61 |
1 x | Servo HITEC HS-325 BB |
1 x | Kwik link AL M3 L:30 mm (2 pcs) + Pin Ø 2,0 mm |
1 x | Gear set HITEC HS-81 |
2 x | EVP Unit for AXI2208/xx and 2212/xx |
1 x | HITEC 20 mm servo arm with ball link |
1 x | Avanti S Jet , Vectorial Exhaust for JetCat P-180 |
1 x | Crimping sleeves for cable 0.70 mm (10 pcs) |
1 x | Head lower part New |
2 x | XH 30 cm Female extension 0,25 mm2 silicone cable for 3 cell |
1 x | Partall paste 650 g |
1 x | Capstan of plastic 88x30x36 mm |
2 x | Futaba Female 40 cm extension |
1 x | 1804 2400KV Brushless Motor Qav 250 mini |
1 x | Servo arm with 6 mm hole to FEMA 9800A |
1 x | Nitroverdu 500 ml |
2 x | Cylidric hinge 43 mm Ø 2,5 mm (5 pcs) |
1 x | Propeller POWER-PROP 13x10 |
1 x | Small aluminium horn gold (2pcs) |
1 x | Bidule 170 ARF 3.48 m |
1 x | Propeller APC 11x4.7 SF Pusher |
1 x | Z Bender - S Type Tool |
1 x | 3 mm Prop Adapter M6 |
1 x | Extension silicon 100 cm (Graupner) |
1 x | Cooler motor type 150 |
1 x | Propeller APC 10x7 Electric |
1 x | Connector Sub-D 2+5 Female |
1 x | Anodized aluminium servo M4x5/8 screw (4 silver pcs) |
1 x | 33,0 mm propeller (rigth propeller) |
1 x | AXI 2808/20 V2 |
1 x | XH 30 cm Female extension 0,25 mm2 silicone cable for 5 cell |
2 x | Silicone black 1,5 qmm wire ( 25 m) |
1 x | 3,0x60 mm allen screwdriver |
1 x | Steering arm 12 mm Ø 3 mm (2 uds) |
2 x | Motor A50-16 S V4 |
1 x | F9F COUGAR Grey ARF 1.562 mm |
1 x | Green smoke canister 100 g |
1 x | Cabel charger transmitter GRAUPNER |
1 x | Horn DU-BRO 1/2 (2 pcs) |
2 x | Screws M1,6x6 Allen |
1 x | Carbon tube (L 1000 mm, Ø2 mm, Ø1 mm) |
1 x | Propeller electric carbon 10x6 |
2 x | ESC Ripmax QUANTUM 80A SBEC |
1 x | Presto SF Light Filler styrene-free (420 g) |
1 x | PYRO 700-56L |
1 x | Straightened threaded rod M3 - 1m |
2 x | DUPLEX USBa USB-Adapter for Jeti Duplex Items |
1 x | Battery LiPo TATTU 1300 mAh 4S 14,8V 75C |
1 x | B4-0 rocket charges (6 pcs) |
1 x | 6 mm ball link M3 (10 pcs) |
1 x | AXI 2826/12 V2 Long |
1 x | Tow hook for tug |
1 x | Spinner propeller pleg. 40 mm / 3,2 mm |
1 x | Servo HITEC HS-55 |
1 x | Propeller Pleg CAM Carbon 16x13 |
1 x | 3 LiPo XH>EH adapter |
1 x | DLE Ignition 111/120/170 |
2 x | Propeller POWER-PROP 14x8 |
1 x | 13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
1 x | Electric Landing Gear F9F COUGAR |
1 x | Esc MasterBasic 70SB |
1 x | Streamline Stainless Steel Tubing 15.5x8.5x1000 mm |
1 x | 6 mm Prop Adapter M8 |
1 x | Piston ring for DLE-20 |
1 x | ODYSSEY REd ARF 2190 mm |
1 x | AXI 2826/8 V2 Long |
1 x | Screws set for Hitec MG arms servo |
1 x | Conector FUTABA Servo male (10 pcs) |
1 x | Central piece 52 mm - 5º |
1 x | 4 mm Prop Adapter M8 |
1 x | 34 mm Alu spinner 3.17 mm pleg. propeller |
1 x | Small flex hinge (12 uds) |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø12 mm, Ø8 mm) |
1 x | Quicklock washer 1.5 mm (10 pcs) |
1 x | 36 mm black plastic spinner for fixed propeller |
1 x | Propeller APC 14x7 Electric |
1 x | Propeller Pleg CAM Carbon 12x11 |
1 x | White spinner propeller pleg. 36 mm / 5 mm |
1 x | 6 mm Prop Adapter M8 |
1 x | CC 03 |
1 x | Profile ABS half cane 3x1000 mm |
3 x | Towing hook |
1 x | Camera Sony 4140+673 CCD with Built-in 200mw TX + antenna |
1 x | Propeller APC 13x4 Electric |
1 x | Servo TOPMODEL DS1413 T |
1 x | Propeller Pleg CAM Carbon 10x7 Reverse Rotation |
1 x | Antenna holder bracket double |
2 x | ABS Strip 1.5x3.0x1000 mm |
1 x | Servo HITEC HS-45 HB, servo box |
1 x | Motor DLE 200cc Premium Muffler |
1 x | Antenna 50 mm (2 uds) |
1 x | 28x5 mm wires output (2 pcs) |
1 x | 5 mm M2 variable inclined horn |
1 x | Electric Landing Gear GALEB G4 |
2 x | Breatex™ Non-woven absorber 150 g/m² Roll 20m |
1 x | Propeller CFK 15x15 |
1 x | Motor mount VANQUIST 48" F3A |
2 x | SF260 SIAI MARCHETTI 50E yellow/black (SebArt) |
1 x | Servo FUTABA S 9670 SV |
1 x | Propeller 9x7 SlowFlyer |
1 x | Propeller CFK 11x8 |
1 x | Crystal Universal RX 35.050 Ch 65 |
1 x | Propeller POWER-PROP 16x8 |
1 x | Propeller electric carbon 9.5x5 |
2 x | Tirpiz Battleship 1:200 |
1 x | Rigid coupling brass Ø 2 mm L: 15 mm |
1 x | Spinner propeller pleg. 38 mm / 4 mm |
1 x | Propeller CFK 15x13 Slim |
1 x | DUPLEX 2.4EX RC Switch |
1 x | 3l Smoke oil |
2 x | Side rudder |
1 x | TopFuel LiPo RX 25C-ECO-X 800mAh 2S |
2 x | Clip fixing for wing (2 pcs) |
1 x | 100 mm rods + T patellas set for direction control |
1 x | 10 mm Prop Adapter M12 |
2 x | Connectors banana oro 6,0 mm Ultralight (M/F) |
1 x | Futaba Prop Module F14 |
1 x | Spring lock washer 2.1 mm (20 pcs) |
2 x | Winter-Glove DS tx |
1 x | Straightened rod Ø 4.5 mm x 1000 mm |
2 x | Clevis plastico I=45 mm / hole 3mm / pin 1 (2 pcs) |
1 x | Battery FUTABA Li-Fe 2100 mAh 6.6v 4PLS/4PX/8J/10J/14SG/18SZ |
1 x | GS-200 Electronic |
1 x | Propeller APC 10x4.5 MR Electric Pusher |
1 x | Propeller APC 13x6.5 Electric Pusher |
1 x | Servo HITEC HS-225 MG |
1 x | Extension silicon 10 cm (Futaba) |
2 x | 3 mm Leader (L 100 mm) |
1 x | Anodized alum. M4x0,7x20 mm Flat Head screw (4 blue pcs) |
1 x | Gear for MICRO BB |
1 x | Servo HITEC HS-45 HB |
1 x | A50 Motor Mount Alu complete set |
1 x | KIRA 600-30 6,7:1 |
1 x | Spinner propeller pleg. 38 mm/6,0 mm/7º |
1 x | Servo JETI DSHV 3D13T (13 Kg) |
1 x | Fabric scissors curved (offset handles), 16 cm / 6" length |
1 x | Cable grommet 9.5 mm (4 uds) |
2 x | Canopy Lock V1 M3 Blue (2 pcs) |
1 x | M2,5 / 5Diam metal short ball link V3 (2 pcs) |
1 x | Motor A50-10L Turnado V3 Glider |
2 x | Carbon fiber rod 7.0 mmx1000 mm |
1 x | Propeller POWER-PROP 12x6 |
1 x | Gold antispark 4 mm plug |
1 x | Regulador NAVY 540R |
1 x | Prop Shaft Adapter 6 mm/M8 "long" 35 mm |
1 x | Servo HITEC HS-5645 MG Digi |
1 x | Xplorer4 anemometro |
2 x | 20 mm tail wheel for 0,5-1 Kg models |
1 x | Spinner propeller pleg. 30 mm / 6,0 mm |
1 x | 25 mm Sandpaper file |
2 x | Aluminum Bayonet / strongal D25 mm / 1 m |
1 x | Carbon fibre tape 200 g/m² (unidirectional) 50 mm |
1 x | resin-hardener L-385 H-385 (625 g) |
1 x | Canopy Latch |
1 x | Propeller APC 10x5 Electric |
1 x | Double aluminium servo arm V1-Hitec 2,5 inch M3 (blue) |
1 x | Stainless steel cable Ø 0.52 mm - 15 kp (10 m) |
1 x | Canopy Lock V1 M3 Red (2 pcs) |
2 x | Carbon fiber rod 2.5 mmx1000 mm |
1 x | Mitsubishi ZERO AM6 91 ARTF |
1 x | Digital scale up to 40 kg |
1 x | TopFuel LiPo 35C-ECO-X 7500mAh 6S MTAG |
1 x | Sanyo Eneloop AA 1,2 V battery 2000 mAh |
4 x | Windsock Ozone L -1200 mm |
1 x | Silicone black 1,0 qmm wire ( 25 m) |
2 x | Servo HITEC HS-70 MG |
1 x | UBEC 6A KAVAN |
1 x | 1,2x1000 mm 2:1 red termoretract tube |
1 x | Connectors banna oro 8,0 mm (Male) 5 pcs. |
1 x | KIRA 600-16 |
1 x | 3 copper lacquer wire Ø0,2 mm (1 m) |
1 x | KIRA FAI 5F5/4s |
1 x | Fiberglass plate 620x540x1,0 mm |
1 x | 261 mm M4/M4 6.0x4.0 mm shaft ship |
1 x | Extension silicon 30 cm female (Graupner) |
1 x | Spinner propeller pleg. 40 mm / 5,0 mm |
2 x | 58 mm micro servo cover |
1 x | 2,3 mm Prop Adapter M6 |
1 x | Mahagoni 1.0x100x1000 mm |
1 x | Straightened rod Ø 2.0 mm x 1000 mm |
1 x | Dremel 3000 130W |
1 x | Propeller Pleg CAM Carbon 10x5 |
2 x | Spinner propeller pleg. 40 mm / 3,2 mm |
1 x | PT 16x10 E Propeller |
1 x | Small Crow DLE-170M |
1 x | Beech dowels 2.0 x 1000 mm |
1 x | Conector BEC female (10 pcs) |
1 x | Propeller Pleg CAM-Prop 8x6 |
1 x | LA-7 Lavochkin 2314 mm (CY model), Wheels and le |
1 x | Size "L" motor holder for class 600 |
1 x | Focke Wulf FW-190A-8 93", Electric retract Landing gear |
1 x | Heat Seal Iron |
1 x | SE Ring 300 mm (2 pcs) |
2 x | KIRA 480-26 5,2:1 |
1 x | Carbon Fiber TeXtreme® 80 g/m² (plain) 100 cm, roll/ 10 m |
2 x | Metal clevis M3 (10 uds) |
2 x | Futaba F14 Twin Boat Stick |
1 x | Hitec 25 mm servo arm with ball link |
1 x | Carbon fiber rod 8.0 mmx1000 mm |
1 x | Motor OS 3805-1200 electric |
1 x | Kwik link with arm M5xM2,5xL30 |
1 x | 15 mm reinforced hinge |
1 x | Receiver DUPLEX REX 3 A20 2.4 GHz |
1 x | 5 mm Prop Adapter M6 |
1 x | Horn 6/20 with M3 Bearing |
1 x | Profile ABS half cane 8.0x1000 mm |
1 x | Spinner propeller pleg. 40 mm / 3,0 mm |
1 x | Cockpit aluminium closing |
2 x | Motor wall |
1 x | Servo safety connector (10 pcs) |
1 x | 18 mm reinforced hinge |
1 x | Monokote BLUE metalizado (1.8x0.65m) |
1 x | Z type of cable coupler Ø 2 (2 uds) |
1 x | Banna gold connector 2,5 mm (100 M/F pairs) |
2 x | Rotor Mast |
1 x | Crystal Universal RX 35.140 Ch 74 |
1 x | Propeller RABOESCH M5 65 mm (4 Blades) (Left hydropropeller) |
1 x | Fabric scissors curved Premium, 16 cm / 6" length |
1 x | Gear set HITEC HS-645MG/5645MG/5685MH |
1 x | 3.17 mm Prop Adapter CN-Spinner |
1 x | 80 mm rods set for direction control |
1 x | Antenna Cloverleaf 5.8 GHz Tx - Rx |
1 x | Propeller POWER-PROP 16x10 |
1 x | Propeller APC 11x5.5 Electric |
1 x | Fully Threaded Steel Rod alumin 90 mm M2,5 (2 pcs) |
2 x | Breatex™ Non-woven absorber 300 g/m² Roll 41 m |
1 x | Gold aluminium servo arm V2-JR 1,25" inch M3 |
2 x | Small pinned hinge (6 uds) |
1 x | Rudder |
1 x | Horn F3A de Titanium 16 mm (2 units) |
1 x | Peel ply 95 g/m² (plain weave) 20 mm x 100 m |
1 x | Red aluminium servo arm V3-Futaba 1,5inch M3 |
1 x | PVC termo-retract battery 45 mm transparent orange (1 m) |
1 x | Ball link M1.6 (6 uds) |
1 x | Baering 3x8x4 |
1 x | Silicone red 2,5 qmm wire ( 1 m) |
3 x | Brass ball links BS M3 V1 (10 pcs) |
1 x | Connectors banna oro 8,0 mm 5 pcs(Female) |
1 x | Q80-13S 20-Pole F3A |
1 x | Motor mount M |
1 x | Battery RX JETI LiIon RB 6200 7.2v |
1 x | Propeller electric carbon 10.5x7 |
1 x | Propeller electric carbon 8.5x7 |
1 x | Foaming agent for epoxy resins 200 g |
1 x | Spinner propeller pleg. 38 mm/6,0 mm/5º |
1 x | Propeller Pleg CAM Carbon 10x12 |
1 x | LA500 front gear holder |
1 x | ODYSSEY BLACK Eagle ARF 2190 mm |
2 x | MIG 29 3D RTF, Servo |
2 x | Pine wood slat 1.5x3.0x1000 mm |
2 x | Brass rod Ø 1.5 mm x 1000 mm |
1 x | Red spinner 40-45 mm |
2 x | A/C quality beech plywood 600x300x0.6 mm |
1 x | Brass control horn M4 long for wire (4 pcs) |
2 x | Wing-connector: Glass / Carbon tube (26.5/25 x 25/23) x 1000 mm |
2 x | Spring lock washer 3.1 mm (20 pcs) |
1 x | Central piece 42 mm - 5º |
1 x | Long pinned hinge (12 uds) |
1 x | Straightened rod Ø 1.0 mm x 1000 mm |
1 x | Spare spinner 40/42 mm 3-Bl |
1 x | 30 cm MULTIPLEX female connector |
2 x | 36,0 mm propeller (rigth propeller) |
1 x | M3/5 Diam metal short ball link V3 (2 pcs) |
1 x | 2,0x50 mm allen screwdriver |
1 x | TopFuel LiPo 20C-ECO-RX 500mAh 2S |
1 x | Blue aluminium servo arm V2-Hitec 1,0 inch M3 |
1 x | VPP system propeller for AXI VPP motors (spare) |
2 x | 67 mm cylidric hinge Ø 5 mm (4 pcs) |
1 x | 2,5x60 mm allen screwdriver |
1 x | Ball link M3 (10 pcs) |
2 x | Remolcador "Jonny Hafenschlepper" |
1 x | 5 mm Prop Adapter M8 |
1 x | Spinner propeller pleg. 38 mm / 6 mm |
1 x | 75 mm |
1 x | Epoxy 40 min (Hardener). 10Kg |
1 x | 5 mm Prop Adapter M8 |
1 x | XH female balance (3S) connector (2 pcs) |
1 x | JETImodel Addcap 820 |
1 x | Propeller electric carbon 10.5x8 |
1 x | 110x55 mm SLH KOVO wheel |
1 x | Metal ball clevis M3 (10 uds) |
1 x | Futaba 54 mm servo arm with ball link |
1 x | Receiver bed (Blue) |
1 x | Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m |
1 x | Horns set HS-65HB/MG, 5065MG |
1 x | XH/XH 30 cm Female extension 0,25 mm2 silicone cable for 3 cell |
1 x | Rafale C (Aero-naut) |
1 x | Joint with bearing M2,5 22x5,5 |
1 x | 40 mm white plastic spinner for folding propeller |
1 x | Chopped glass fibre strands 3 mm |
1 x | Avanti S Jet , Exhaust for JetCat P-140 (SebArt) |
1 x | Oracover White 2 m |
1 x | LiPo TopFuel ECO-X 3800mAh 2s 20C MTAG |
1 x | Propeller APC 10x6 Electric |
1 x | 42,0 mm propeller (rigth propeller) |
1 x | Nut M2 |
1 x | 12 mm portholes (10 pcs) |
1 x | 65 mm mini servo cover |
1 x | Seoul Power LED 3 watts PCB Sets: 1x white, 1x red, 1x green |
1 x | Piloto RC Civil 1/5- 1/6 Scale 12" |
2 x | Servo TOPMODEL STANDARD S3217 |
1 x | 300x4 mm M4 shaft ship |
2 x | Propeller diller for DLE170 |
2 x | 90x75 mm standart servo cover |
1 x | Alfileres de cobre 0,7 x 7 mm, aprox.50 g |
1 x | Blocking screws M6 gas engine |
1 x | Reflector 18 mm (2 pcs) |
1 x | Civilian pilot "Pamela" size 9cm (Slimline) |
1 x | 45 mm flag mast |
1 x | Aeronaut Baumbeschlag (Ms) 10 mm |
1 x | Adapters for 7.5 - 35cc aircraft and naval engines |
1 x | Servo TOPMODEL S7520 MG |
1 x | Militarian pilot "Fly Boy" size 9cm (Slimline) |
1 x | Tail boom |
1 x | Piloto JET 1:3,5 |
1 x | 29,0 mm propeller (left propeller) |
1 x | Combo lighting module with covering drop shape |
1 x | Tail support (2 pcs) |
1 x | Washer 2.2×4 |
2 x | 1/12 Pilot "Langley" |
1 x | Propeller diller for DLE111 and DA85-150 |
1 x | 290 mm M4/4 mm Prop shaft |
1 x | Ignition bed V2 Red color |
1 x | Avanti XS Jet , Tank for Keroseno (SebArt) |
1 x | GLOW 9C + accesories |
1 x | Electromotor starter EME 35cc |
1 x | Adaptadores carga 6s JST-XH |
1 x | Esc KOSMIK 160+ HV COOL |
1 x | DC-3 Douglas (White/Blue) 1800 mm |
1 x | Pilatus PC-21 2100 mm BLUE/WHITE (SebArt) |
1 x | PIT (Aero-Naut) |
2 x | Starter EM Gear Power 80 |
1 x | RCEXL Electronic ignition twin CM-6 |
1 x | Decorative caps, multicoloured |
1 x | Medidor ángulos y/o incidencias |
1 x | Esc KOSMIK 160 HV |
1 x | EXTRA NG 74" yello/blue/red (Skywing RC) |
1 x | Compact on-board starting system (9715) |
2 x | TMM 2512-3S heli |
2 x | WingFix ULTRA Black Edition |
1 x | 28 mm tailwheel unit |
1 x | TWIST planeador gomas |
2 x | 2000A 12V Lithium Jump Starter with 150PSI Air inflator |
1 x | ESC KOLIBRI 140 HV-I |
1 x | Selfstarr DLE55, EME55/60, DLA56, SE 55 |
1 x | KOLIBRI 90 LV-I Esc |
1 x | Recess mount-rem. glow plug set |
1 x | AXI Cooler 22xx |
2 x | Hard brass tubing (L 1000 mm, Ø10.0 mm, Ø9.1 mm) |
1 x | Distanzstück motor OS 120 AX |
1 x | Frontal Adapter for AXI53xx |
1 x | Pilatus PC-21 50E, Electric L.G (SebArt) |
1 x | Shaft KPG25 4,2:1 |
1 x | Encendido CDI RCAME 1/4*32 Single 120º |
1 x | MOTOR MOUNT RODS AXI 53XX AND AXI 81XX 60MM (4PCS) |
1 x | Pilatus PC-21 + LG.2100 mm BLUE/WHITE (SebArt) |
1 x | Foam plastic plates (310x210x2 mm) |
1 x | Avanti XS Jet , Fuselage Stand (SebArt) |
1 x | Foam plastic plates (310x210x5 mm) |
1 x | Carbon tube (L 1000 mm, Ø4 mm, Ø2,5 mm) |
1 x | |
1 x | JIVE 100+LV Esc |
1 x | VIPER JET G2 Esq. 5 Green/White/Blue |
1 x | Avanti XS Jet , Carrying bags (SebArt) |
1 x | VIPER JET G2 Esq. 2 White/Red |
2 x | Brass hexagonal rod Ø 3 mm x 1000 mm |
1 x | JIVE 80+HV Esc |
1 x | DORNIER DO 335 EP ARF 1724 mm |
1 x | Foam plastic plates (310x210x8 mm) |
1 x | Opto Gas Engine Kill Switch |
1 x | Avanti XS Jet , Tricolore Canopy |
1 x | DLE Ignition unit |
1 x | EXTRA NG 74" white/red/blue (Skywing RC) |
1 x | Turbina KINGTECH K320 G5 |
1 x | KOBY 70 LV Esc |
1 x | Brass hexagonal rod Ø 4 mm x 1000 mm |
1 x | Crimping tool |
1 x | JIVE 120+HV Esc |
1 x | Prop Saver for AXI 22xx/xx |
1 x | Esc KOSMIK 200 HV |
1 x | Compact on-board starting system (9525) |
1 x | Compact on-board starting system (9713) |
1 x | SF260 SIAI MARCHETTI 50E red/white (SebArt) |
1 x | AXI Cooler 41xx |
1 x | KOBY 40 LV Esc |
1 x | Decorative caps, multicoloured, short |
1 x | Brass hexagonal rod Ø 3.5 mm x 1000 mm |
1 x | Electric Landing Gear AVANTI XS (Elektron Retracts) |
2 x | GLOW 5C + accesories |
1 x | Tube Pitot to PIXHAWK |
1 x | Servo GO-1035MG 16 kg.cm 0.08s/60º |
1 x | Carbon tube (L 1000 mm, Ø16 mm, Ø12 mm) |
1 x | KOLIBRI 140 LV Esc |
1 x | Tank ULTIMATUM 2.0 (3.2 L) PRO |
1 x | Set transmisions ULTIMATUM 2.0 (dura/aluminium) |
1 x | Motor A60-5XS V4 28-pole kv420 |
1 x | Set Stickers Ultimatum 2.0 - Andy Folienwelt |
1 x | Motor A30-10 XL V4 |
1 x | DJI FPV Combo |
1 x | Savox Brushless Servo SC-1267 SG |
1 x | Motor A50-14L Turnado V3 Glider |
1 x | Servo SAVOX SV-1260 MG |
1 x | Jet Pipe for ULTIMATUM 2m |
1 x | Electric Landing Gear "Black Edition" ULTIMATUM 2.0 (Elektron Re |
2 x | Propeller POWER-PROP 11x6 |
1 x | Bateria DJI Mini 2 2250 mAh |
1 x | Propeller FALCON 32,5x11 PUSHER Carbono |
1 x | Tank ULTIMATUM 2.0 (3.2 L) + Smoke (0.9 L) PRO |
1 x | Motor brushless 1806 - 2300 Kv Cuadracopter |
2 x | Spare screw M3 6pcs. |
1 x | Servo SAVOX SW-1250 MG digi |
2 x | Backmountset complete A40 |
1 x | Propeller electric carbon 9.5x7 |
1 x | Servo SAVOX SV-1254 MG HiVolt Low Profile |
1 x | Propeller POWER-PROP 9x6 |
1 x | SAVOX SH 1250 MG servo digi |
1 x | MPX Support |
1 x | Round Rod 2,0x1000 mm |
1 x | Piñones SAVOX SH-0350 |
1 x | Jet Afterburner Simulator NF-Jet2 |
3 x | BRASS CONTROL HORN M3x16 mm 2pcs |
1 x | Jet Afterburner Simulator NF-Jet4 RY |
1 x | Propeller POWER-PROP 14x10 |
1 x | Electric Landing Gear GS-200 ULTIMATUM 2.0 (Elektron Retracts) |
1 x | Propeller electric carbon 10x7 |
1 x | NF-2 RC set |
1 x | Servo mounting frame SV-1260MG |
1 x | PROPELLER ELECTRIC glass 9,5x6 |
1 x | Jet Afterburner Simulator NF-Jet3 RY |
1 x | Sun Cover ULTIMATUM 2.0 (Hispano Aviacion) |
1 x | Propeller electric carbon 8.5x5 |
1 x | Motor A60-7XS V4 28-pole kv330 |
1 x | 200m servo "Premium" wire (white/red/blue) |
1 x | Klumpblock (Plastik), Höhe 4 mm, 2 Rille, 20 Stück |
1 x | STEERING FRONT WHEEL SYSTEM BIDULE 55 |
1 x | LA500 pre-rotation gear |
1 x | Housing Ø 6 mm (20 pcs) |
1 x | Guide capes 25 mm (2 pcs) |
1 x | 10m servo "Premium" wire (white/red/blue) |
1 x | Grua platico 100 mm |
1 x | Plywood sheet BEECH 600 x 300 x 2,0 mm |
1 x | Prog Card V2 DUALSKY |
1 x | G-Ring Ø3mm Ø3xØ6x3 mm |
1 x | 1.2L Kevlar tank for this mini SebArt Jet |
1 x | Prelude ARF 2500 mm, spare wing (TopModel) |
1 x | Carbon rectangular rod 10.0 mm x 1.0 x 1000 mm |
1 x | Lancha neumatica 95 mm |
1 x | Pegasus 2050 mm F4J (Top Model) |
1 x | Cable servo PREMIUM MAXI 10m (blanco/rojo/azul) PVC |
1 x | Carbon fiber rod 16 mm x 1000 mm |
1 x | Guide capes 23 mm (4 pcs) |
1 x | LA500 pre-rotation gear hub |
1 x | Furling sail Ms.10mm (5pcs) |
1 x | Life guard Ø 8 mm (24 pcs) |
1 x | Life guard Ø 25,0 mm (2 pcs) |
1 x | Birch plywood plate 600x300x1.5 mm |
1 x | Farol Ms. 3v/10 mm |
2 x | Cable servo PREMIUM MAXI 100m (blanco/rojo/azul) PVC |
1 x | Pine wood slat 3.0x7.0x1000 mm |
1 x | Liston HAYA 10 x 10 x 1000 mm |
1 x | THERMIK DREAM 3.000 mm (Topmodel) |
1 x | L39 Mini 1.43m Checa Rep. +elec.L.Gear + 3 Microservos |
1 x | Silicone red 6,0 qmm wire (25 m) |
1 x | Prelude ARF 2500 mm (TopModel) |
2 x | Cable set PREMIUM Maxi, SUB-Done 4three fuselage/wing 200 cm |
1 x | Ventus 1:4 set of instruments |
1 x | Birch plywood plate 600x300x4.0 mm |
2 x | STEERING FRONT WHEEL SYSTEM BIDULE 111 |
1 x | Ventus 2cx 4.5 m Bag canopy |
1 x | Carbon fiber rod 1.5 mm x 2000 mm |
1 x | Klumpblock (Plastik), Höhe 8 mm, 1 Rille, 20 Stück |
1 x | PVC 0,35 qmm servos wire Graupner (100 m) |
1 x | Klumpblock (Plastik), Höhe 5 mm, 1 Rille, 20 Stück |
1 x | Cable servo PREMIUM MAXI 200m (blanco/rojo/azul) PVC |
1 x | Universal Colour Paste deep black 50 g |
1 x | Silicone adhesive ELASTOSIL® E4, tube/ 90 ml |
1 x | Premium servo extension 50cm |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (10 pcs) |
1 x | Cabel "Y" 15 cm |
2 x | Premium servo extension 100cm |
2 x | Extension 90 cm (Futaba) |
1 x | Carbon fabric 160 g/m² (plain weave) 100 cm x 3 m |
1 x | 20 mm carbon horn |
1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 10 m |
1 x | Motor B50-14 S |
1 x | Premium servo extension 75cm |
1 x | Extension silicon 10 cm (Graupner) |
1 x | Planetary Gear 3,7:1incl. mountingadapter, pinion |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (20 pcs) |
1 x | Propeller Pleg CAM Carbon 10x6 |
1 x | Combo RAY C3542-1000 + ESC 60A |
1 x | Motor B40-10 L |
1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 100 m |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x6.0 mm (5 pcs) |
1 x | Carbon fabric 68 g/m² (style 493 aero, plain weave) 100 cm |
1 x | Hobbylite Filler, Balsa colour |
1 x | Actuator Electric 25 mm |
1 x | Hard brass tubing (L 1000 mm, Ø8.0 mm, Ø6.1 m) |
1 x | Carbon tube 3K-PW (L 2000 mm, Ø40 mm, Ø36 mm) |
1 x | Gear set HITEC HS205/225MG/5245MG/7245MH |
1 x | Spinner propeller pleg. 40 mm / 4,0 mm |
1 x | Servo AN-8 HBA |
1 x | CARBON CUB FX-3 100-200CC ARF, 165" - 4200 mm (Hangar9) |
2 x | Gear set HITEC HS-85 |
1 x | XPower H PROP HUB Ø6.0/42.5mm 0º |
1 x | Servo HITEC HS-82 MG |
1 x | White Fold Prop Spinner 38 mm / 5 mm shaft / 8 mm propellers |
2 x | Fiberglass heat shield Ø 4 mm 1000 mm |
1 x | Ply-Span 450x600/13g Blue |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø18 mm, Ø16 mm) |
1 x | Carbon tube 3K-PW (L 2000 mm, Ø40 mm, Ø37 mm) |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø30 mm, Ø27 mm) |
1 x | Extension MPX-MPX 20 cm |
1 x | Chili Race F3K 2 wing servo mounted(carbon biax) |
1 x | Carbon tube 3K-PW (L 2000 mm, Ø40 mm, Ø37 mm) |
1 x | Set Micro-horns HS-60/81/85 |
1 x | Mini DART 2 F3K carbon light 1m Green |
1 x | Hard brass tubing (L 1000 mm, Ø18.0 mm, Ø16.0 mm) |
1 x | Conexion PREMIUM MAXI fuselaje/alas 200 cm one4one |
1 x | Cable servo PREMIUM MAXI 1 m (blanco/rojo/azul) PVC |
1 x | Fiberglass heat shield Ø 8 mm 1000 mm |
1 x | Hard brass tubing (L 1000 mm, Ø3.0 mm, Ø2.1 mm) |
1 x | Spinner propeller pleg. 40 mm / 4,0 mm |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø22 mm, Ø20 mm) |
1 x | Gear set HITEC HS-125MG/5125MG |
1 x | Bidule 111 3000 mm |
1 x | Race 400 7,2 V |
1 x | Avanti S, Cockpit sunCover (SebART) |
1 x | 180° TUBE-ANGLE Ø 25 mm |
|
388,194.47EUR |