2 x | Battery RX JETI LiIon RB 5200 7.2v |
3 x | Battery RX JETI LiIon RB 2600 7.2v |
1 x | Ball link Aluminio M3 (2 pcs) |
1 x | Ball link duraluminium M3 V1 (10 pcs) |
1 x | Z type of cable coupler Ø 1.8 (2 uds) |
1 x | Threaded coupler ALU M2,5 Ø 4 (2 uds) |
1 x | Threaded coupler M2,5 Ø 3 mm (10 pcs) |
1 x | Ball link Aluminio M4 x 4 x 6 x 26mm (4 uds) |
1 x | Z type of cable coupler Ø 2 (2 uds) |
1 x | Clevis plastico I=26 mm / hole 2mm / pin 1 (2 pcs) |
1 x | Brass ball links BS M3 V1 (10 pcs) |
1 x | Ball Link ALU M3 - RH (1 pcs) |
1 x | Threaded coupler M2,5 Ø 2 mm (10 pcs) |
1 x | Threaded coupler ALU M3 Ø 5 (2 uds) |
1 x | Threaded coupler ALU M2,5 Ø 3 (2 uds) |
1 x | Clevis plastico I=44 mm / hole 3mm / pin 2 (2 pcs) |
1 x | Crimping sleeves for 1.1 mm cable (10 pcs) |
1 x | Aluminium red ball links M3 V1 (10 pcs) |
1 x | Couple M4 for wire (10 pcs) |
1 x | Aluminium coupler M3/2 with ball bearing (1 pcs) |
1 x | Ball link V1 Ø7 M4/3 (6 uds) |
1 x | Walnut wood slat 3.0x3.0x1000 mm |
1 x | BALSA trip 3.0x5.0x1000 mm |
1 x | BALSA triangular 10x10x1000 mm |
1 x | Pine wood slat 3.0x10.0x1000 mm |
1 x | OBECHI sheet 2.0x3.0x1000 mm |
1 x | Walnut wood slat 2.0x2.0x1000 mm |
1 x | BALSA triangular 6x6x1000 mm |
1 x | Connectors DEANS (T) |
1 x | Battery LiPo GENS 3300 mAh 6S 22.2v 45C (Gens Ace) |
1 x | Battery LiPo GENS 5000 mAh 4S 14.8v 45C (Gens Ace) |
2 x | XH male balance (4S) connector (2 pcs) |
1 x | Connectors banna oro 4 mm (M/F) |
1 x | Battery LiPo GENS 5000 mAh 2S 7.4V 60C (Gens Ace) |
1 x | Battery LiPo GENS 4000 mAh 6S 22.2v 45C (Gens Ace) |
1 x | Connectors banna oro 4 mm (M/F) (ultralight) |
1 x | Battery LiPo GENS 4000 mAh 4S 14.8v 25C (Gens Ace) |
1 x | 30 cm DEANS female connector |
1 x | Battery LiPo GENS 5000 mAh 4S 14,8V 40C (Gens Ace Hard Case) |
1 x | Connectors banna oro 3 mm (M/F) |
1 x | Connectors banna oro 8,0 mm 5 pcs(Female) |
1 x | Connectors DEANS 4 pins (1 pair) |
1 x | Battery LiPo GENS 4000 mAh 3S 11,1v 25C (Gens Ace) |
1 x | Battery LiPo GENS 5500 mAh 5S 18.5v 25C (Gens Ace) |
2 x | Connectors banna oro 3,5 mm (M/F) |
1 x | Conector Servo female 4 pines |
2 x | Connector CAN 15 |
1 x | Battery LiPo GENS 1800 mAh 4S 14.8v 25C (Gens Ace) |
1 x | Battery LiPo GENS 2500 mAh 2S 7.4v 25C (Gens Ace) |
1 x | Battery LiPo GENS 5500 mAh 2S 7.6V 120C (Gens Ace Hard Case) |
1 x | Battery LiPo GENS 5000 mAh 12S 44.4v 45C (Gens Ace) |
1 x | Battery LiPo GENS 450 mAh 2S 7.4V 25C (Gens Ace) |
2 x | Connectors banna oro 2 mm (M/F) (ultralight) |
1 x | Battery LiPo GENS 4400 mAh 7S 25.9v 35C (Gens Ace) |
1 x | EC5-Set female, simple quality, 2 x female pin, 1 x blue housing |
1 x | Battery LiPo GENS 5300 mAh 4S 14.8V 30C (Gens Ace) |
1 x | Battery LiPo GENS 3700 mAh 6S 22.2v 60C (Gens Ace) |
1 x | MPX Sub-D Adaptor |
1 x | Banna gold connector 2,5 mm (M/F) |
1 x | Ferrita 14x8x5.5 mm |
1 x | Extractor piñones 2.3/3.2 mm |
1 x | Ferrita 17x10x6.5 mm |
1 x | Oracover Yellow CUB 10 m |
1 x | Streamline Stainless Steel Tubing 12.3x7.7x1000 mm |
1 x | Profile ABS Square 3 x 1000 mm |
1 x | Circlik for shaft 1.5 mm (10 pcs) |
1 x | Battery LiPo GENS 5000 mAh 2S 7.4V 50C (Gens Ace Hard Case) |
1 x | Actuador lineal HLS12-100210-7.4v |
1 x | Soporte servo KST X08/H and Plus |
1 x | SAVOX SH 0254 servo |
3 x | Futaba 38 mm servo arm with ball link |
1 x | Adapter rotula M3 |
2 x | Soporte grifo FESTO (2 pcs) |
1 x | Soporte filtro FESTO (4 pcs) |
2 x | Tapa estado carga XT-60 (6 pcs) |
1 x | Brazo servo KAVAN doble aluminio 25T - 2.5" M3 |
3 x | Aro pasacable Ø20 mm (4 pcs) |
1 x | Servo GO-02 Digital 1.8g |
1 x | LiIon Battery 3000 mAh 3.3v 15A (2 pcs) |
2 x | Servo GO-1053 MG 20.0kg |
1 x | Pulley brass 8/2 (2 pcs) |
1 x | Clevis plastico I=30 mm / hole 2.5mm / pin 1 (2 pcs) |
1 x | Pulley brass 14/2 (2 pcs) |
1 x | Pulley brass 12/2 (2 pcs) |
2 x | Pulley brass 2,5/1 (2 pcs) |
1 x | Metal clevis M2 (10 uds) |
2 x | Pin 2,0 to cable coupler M2,0 ⌀ (6 pcs) |
1 x | Kwik link with arm M5xM2,5xL30 |
1 x | Porta Kwik link M4 3 mm (2 pcs) |
1 x | Pulley brass 2,5/1 (2 pcs) |
1 x | Kwik link aluminio M3 L: 30mm (6 uds) pin Ø 2 mm |
1 x | Round Rod 1.0x3.5 cm |
1 x | Kwik link aluminio M3 L: 30mm (6 uds) pin Ø 2 mm |
1 x | XH male balance (9S) connector (2 pcs) |
1 x | Battery LiPo TATTU 9000 mAh 6S 22,2V 25C |
1 x | Soldering PCBs 8pin, 5 pieces |
1 x | Glider retract undercarriage 8-16 Kg 2.5-3.2(without wheel) 140m |
1 x | Festo 6mm Tubing Holder (10 uds) |
1 x | Battery LiPo TATTU 1800 mAh 4S 14.8V 75C |
1 x | Battery LiPo TATTU 450 mAh 4S 14,8V 75C |
1 x | Battery LiPo GENS 6000 mAh 6S 22.2v 45C (Gens Ace) |
1 x | Trailing leg 131 mm |
1 x | Battery LiPo GENS 8500 mAh 2S 7.6V HV 120C |
1 x | Mini neumatic retract landing gear |
1 x | Conector JR/Uni Servo male BLUE silicon (10 pcs) |
1 x | Battery LiPo TATTU 10000 mAh 4S 14,8V 25C |
1 x | Battery LiPo TATTU 2300 mAh 3S 11,1V 45C |
1 x | Nylon threaded block M6 (2 uds) |
1 x | Conector male bateria 1s Kavan/Walkera 10cm cable |
1 x | Battery LiPo GENS 6000 mAh 2S 7.6V 120C (Gens Ace Hard Case) |
1 x | Battery LiPo TATTU 1300 mAh 4S 14,8V 75C |
1 x | XH female balance (9S) connector (2 pcs) |
1 x | Wing connector 8pin with pin strip, plug & socket |
2 x | Angled clevis with threaded rod M3 |
1 x | 40 mm air cylinder |
1 x | Battery LiPo TATTU 70000 mAh 6S 22.2V 25C |
1 x | Fail Safe air retract |
2 x | Landing gear clamp for Ø 3 mm (4 uds) |
1 x | Landing gear axle Ø 4 mm (2 uds) |
1 x | Set montaje amortiguador para modelos 8-16 Kg |
1 x | Small Crow DLE-170M |
1 x | Conector JR Servo female (50 pcs) |
1 x | Conector BEC female (10 pcs) |
1 x | Battery LiPo TATTU 450 mAh 2S 7,4V 75C |
1 x | Battery LiPo TATTU 2300 mAh 4S 14,8V 45C |
1 x | Quick hose connector 4-4 mm |
1 x | XH female balance (6S) connector (2 pcs) |
1 x | Conector FUTABA Servo female (10 pcs) |
1 x | Nylon gear block Ø 6 mm (2 uds) |
1 x | Conector FUTABA Servo male BLUE silicon (10 pcs) |
1 x | Battery LiPo TATTU 8000 mAh 3S 11,1V 15C |
1 x | Landing gear axle Ø 5 mm (2 uds) |
1 x | Connectors banana oro 6,0 mm Ultralight (M/F) |
1 x | Battery LiPo GENS 7000 mAh 4S 14.8v 50C (Gens Ace) |
1 x | Conector BEC male (10 pcs) |
1 x | Aluminun wheel collar 2.5 mm Ø (4 uds) |
1 x | Faucet FESTO |
1 x | Battery LiPo GENS 6750 mAh 4S 14.8V 100C (Gens Ace Hard Case) |
1 x | Retract undercarriage for gliders 12-25 Kg 2-2.8 (without wheel) |
1 x | Mini neumatic retract 3 mm landing gear (Het-rc) |
1 x | Aluminun wheel collar 4 mm Ø (4 uds) |
1 x | XH male balance (2S) connector (2 pcs) |
1 x | M3 INDUSTRIAL ball link (2 uds) |
1 x | Socket head long ball link M3 (2 uds) |
1 x | Socket head ball link M3 (2 uds) |
1 x | M2,5 / 5Diam metal short ball link V3 (2 pcs) |
1 x | Futaba 76/92 mm servo pull-pull double arm with ball link HUB Al |
2 x | Futaba 20 mm servo arm |
1 x | USB programador GO servos |
1 x | Servo GO-12S70MG 20.5kg.cm 0.06s/60º |
1 x | M2 5Diam short black ball link V2 (2 pcs) |
1 x | Ball link M3 (6 uds) |
1 x | Blue metalic ball link M3/3 azul (2 pcs) |
1 x | Ball link M3 RPA's-UAV's |
1 x | M2,5 5Diam black ball link V2 (2 pcs) |
1 x | M2,5 Diam metal ball link V3 (2 pcs) |
1 x | Joint with bearing M2,5 22x5,5 |
1 x | Long ball link M2 (6 uds) |
2 x | Servo arm with 6 mm hole to FEMA 9800A |
3 x | Servo holder for retract |
1 x | 17 mm servo arm with ball link DES Graupner |
2 x | XTorque CFK Servohebel 38 |
1 x | Hitec 38 mm servo arm with ball link |
1 x | Futaba 17 mm servo arm with ball link HITEC |
2 x | Futaba 2x20 mm servo double arm |
2 x | HITEC 17 mm servo arm with ball link HITEC |
2 x | Futaba 30 mm servo arm with M3 ball link |
2 x | Horizontal mounting servo holder |
2 x | XTorque CFK Servohebel 38 HITEC 25T |
3 x | Futaba 24/30 mm servo pull-pull double arm with ball link |
2 x | Brazo Servo XTorque 52 mm HITEC 25T-6 |
2 x | Futaba 38 mm servo arm |
3 x | 150 Newtons FEMA absorber |
3 x | Hitec 25 mm servo arm with ball link |
2 x | Pasacables rectangular 40x15 mm (4 pcs) |
1 x | Servo GO-1017MG 4.5 kg.cm 0.10s/60º |
1 x | Interface Realflight Simulator |
1 x | SAVOX SH 1250 MG servo digi |
1 x | Aro pasacable Ø25 mm (4 pcs) |
2 x | Recessed MPX connector support (6 pcs) |
1 x | Support Pitot JETI |
2 x | Support Filtro FESTO |
1 x | Support XT60 conector (2 pcs) |
1 x | SU 29S 140 carbon landing gear |
1 x | Support FUEL DOT V3 |
1 x | Slave-cable USB Easy Sim |
1 x | Support pump Xicoy X45 |
1 x | Support Antena 2.4 Ghz (2 pcs) |
1 x | Angle support XT60 conector |
1 x | Metal clevis M2,5 (10 uds) |
1 x | Metal ball clevis M3 (10 uds) |
1 x | Body for landing gear Ø 3 mm |
1 x | Lipo FOXY G3 4500 mAh 11.1v 40/80C |
1 x | PRO-HV Dual Action Valve |
1 x | Mudguard wheels 112/127 mm |
1 x | Motor DLE 430 cc - Paramotors |
1 x | Junta humo metalica G30 (DLE30/DLE60) |
1 x | 160 mm carbon undercarriage (2pcs) |
1 x | Servo SAVOX SA-1258 TG |
1 x | ALU double servo arm 3 mm shaft |
1 x | "L" servo arm 65x49 mm (2 pcs) |
1 x | Small kwik link (10 pcs) |
1 x | Restrictor FESTO 3/3 mm |
1 x | Brake for 140 mm wheels |
1 x | Compact on-board starting system (9525) |
1 x | Ø 2 mm pin for Kwik link MPJ2162/2163 (6 pcs) |
1 x | Pulley brass 10/2 (2 pcs) |
1 x | Landing gear strap medium (4 uds) |
1 x | Nylon gear block Ø 4 mm (2 uds) |
2 x | Aluminun wheel collar 6 mm Ø (4 uds) |
1 x | Connectors banna oro 2 mm (M/F) |
1 x | Lipo RAY 2200 mAh 2s 7.4v 30C |
1 x | Glider retract undercarriage 8-16 Kg 2.5-3.2(127 mm wheel) |
1 x | Motor DLE 170 M- Paramotors |
1 x | Propeller FALCON 32,5x11 PUSHER Carbono |
1 x | RF9 Flight Simulator with Spektrum Controller |
1 x | Big Crow DLE-170M |
1 x | L-shaped servo mount |
2 x | Mudguard for 140/165 mm wheels |
1 x | Compact on-board starting system (9724) |
1 x | Y-Hose connector 6-6-6 mm |
1 x | Junta humo metalica G55 (DLE55/DLE111/DLE222) |
1 x | O-ring Saito FG-73 5cyl |
1 x | Compact Pitts Muffler OS MAX.35.40 FP |
2 x | Transmitter Crystal 35 Mc/s Ch 77 |
2 x | 51 mm white plastic spinner for fixed propeller / 4,0 mm axi |
2 x | 40 mm 1/4" Race propeller (rigth hydropropeller) |
2 x | POLARON EX 800w charger |
2 x | Spinner fixed propeller 42 mm / 5,0 mm |
2 x | 51 mm INO spinner (carbon imitation) |
2 x | 63 mm INO spinner (carbon imitation) |
2 x | MZ-12, 6 Channel HoTT |
1 x | Decorative caps, multicoloured |
1 x | Propeller Pleg CAM-Prop 10x6 + Spinner |
1 x | Spinner propeller pleg. 40 mm / 3,2 mm |
1 x | Spinner Alumin. propeller pleg. 30 mm / 3,0 mm |
1 x | P 17×5.8 Prop-2PCS/PAIR |
1 x | 100 Newtons FEMA absorber |
1 x | Propeller set 400 (2R+2L) |
1 x | Absorver mount set for 5-10 Kg models |
1 x | Katana Mini carbon wheel pants (2 pcs) |
1 x | Transmitter Crystal 35 Mc/s Ch 62 |
1 x | Spinner INO 75 mm Chrome (Imitacion metal) |
1 x | Beech dowels 4.0 x 1000 mm |
1 x | Spinner INO 82 mm Chrome (Imitacion metal) |
1 x | 45 mm white plastic spinner for fixed propeller / 4,0 mm axi |
1 x | Charger LiPo Charger4 |
1 x | Hose clips 6 mm |
1 x | Adjustable brass horn threaded M3 |
1 x | Spinner Alumin. fixed propeller 50 mm / 5,0 mm |
1 x | 38 mm white plastic spinner for fixed propeller / 4,0 mm axi |
1 x | Propeller hub spacer 8/5.5 |
1 x | Falcon Carbon Spinner 82mm for electric motor |
1 x | Beech dowels 2.0 x 1000 mm |
1 x | Spinner Alumin. fixed propeller 50 mm / 3,2 mm |
1 x | Spinner fixed propeller 60 mm / 5,0 mm |
1 x | F3A carbon 95 mm spinner |
1 x | Spinner Alumin. fixed propeller 45 mm / 6,0 mm |
1 x | Foreman, scale 1:32 |
1 x | Spinner propeller pleg. 30 mm / 3,2 mm |
1 x | Aluminium Hub for folding Props 55 mm M8 Shaft 6 mm |
1 x | Spinner propeller pleg. 40 mm / 6,0 mm |
1 x | Aluminium Hub "Z" for folding Props 30 mm M8 Shaft 5 mm |
1 x | Futaba 46 mm servo arm with ball link |
1 x | Servo BLS-M55B 61.2kg |
1 x | 46 mm Futaba servo arm tandem with ball link |
1 x | 54 mm Futaba servo arm tandem with ball link |
1 x | 82 mm INO spinner (carbon imitation) |
1 x | Conector JAPAN G2 Set 5 pares |
1 x | Spinner INOVA 102 mm Black |
1 x | Spinner 82mm Black ventilado |
1 x | 57 mm INO spinner (carbon imitation) |
1 x | Spikes Band (5 m) |
1 x | Transmitter GRAUPNER MZ-24 Pro |
1 x | Flap hinge (6 pcs) |
1 x | Distanzstück motor OS 120 AX |
1 x | Manometer 4 mm |
1 x | Propeller Pleg CAM-Prop 8x6 |
1 x | Receiver replacement antenna, approx. 15 |
1 x | Spinner Alumin. fixed propeller 45 mm / 5,0 mm |
1 x | 82 mm 12 mm axi 30 g F3A CF drilled spinner |
2 x | Quick hose connector 6-4 mm |
1 x | Canopy Latch |
1 x | Coupling bush 5 - 5 mm |
1 x | MZ-10, 5 Channel HoTT |
1 x | Propeller G-Sonic 20x8 |
1 x | Spinner INO 63 mm Chrome (Imitacion metal) |
1 x | F3A carbon 75 mm spinner for Hacker C-50 |
1 x | MZ-18, 9 Channel HoTT |
1 x | Balanceradapter JST-XH (Heli 47G) 2-6 c. |
1 x | Spinner Alumin. fixed propeller 50 mm / 4,0 mm |
1 x | Landing gear strap large (4 uds) |
1 x | Beech dowels 3.0 x 1000 mm |
1 x | 75 mm INO spinner (carbon imitation) |
1 x | F3A carbon 82 mm spinner for 12 mm axis |
1 x | Aluminium sheet 500x250x0,5mm |
1 x | Mini Infrared Thermomiter |
1 x | Receiver Crystal 35 Mc/s Ch 62 |
1 x | Z-shaped servo mount |
1 x | entral piece 3Bl 42 mm 0º |
1 x | Spinner propeller pleg. 40 mm / 3,2 mm |
1 x | Spinner propeller pleg. 40 mm / 4,0 mm |
1 x | Spinner propeller pleg. 40 mm / 4,0 mm |
1 x | Spinner propeller pleg. 30mm axle 3,0 mm |
1 x | Propeller mounting nuts Black / Silver Rocket 400 or Phatom simi |
1 x | Servo GO-1035MG 16 kg.cm 0.08s/60º |
1 x | Spinner propeller pleg. 40 mm / 3,0 mm |
1 x | Spinner propeller pleg. 40 mm / 3,0 mm |
2 x | 300 Newtons FEMA absorber |
1 x | Aluminium Hub for folding Props 37 mm M8 Shaft 5 mm |
1 x | Turbo light spinner cap white 32mm |
1 x | Spinner propeller pleg. 38 mm/6,0 mm/7º |
1 x | Motor Eachine Racer 250 Brushless Motor - BG2204 2300kv - CW thr |
1 x | Spinner propeller pleg. 38 mm / 5,0 mm |
1 x | Aluminum Fold Prop Spinner 38 mm / 5 mm |
1 x | White Fold Prop Spinner 38 mm / 5 mm shaft / 8 mm propellers |
1 x | SERVO DES 806 Pignons |
1 x | Hitec 25 mm servo arm with M3 ball link |
1 x | Ball link M3 (10 pcs) |
2 x | Futaba 14/20 mm servo pull-pull double arm with ball link |
1 x | Wheel collar 2 mm Ø (4 uds) |
2 x | Futaba 52 mm servo arm |
1 x | Hitec 52 mm servo arm |
1 x | 5 mm M2 variable horn |
1 x | Wheel collar 3 mm Ø (4 uds) |
1 x | FUTABA 20 mm servo arm with ball link |
1 x | Ball link M3 (10 pcs, flat ball) |
1 x | Futaba 30 mm servo rounded arm |
1 x | Hitec 30 mm servo rounded arm |
1 x | 200 Newtons FEMA absorber |
1 x | 400 Newtons FEMA absorber |
|
18,652.04EUR |