2 x | Steering arm 16 mm Ø 3 mm |
1 x | Stainless steel cable Ø 0.5 mm (10 m) |
1 x | Stainless steel cable Ø 0.52 mm - 15 kp (10 m) |
2 x | Steering arm 12 mm Ø 3 mm (2 uds) |
1 x | Electric spoiler 250 mm (2 pcs) |
1 x | Screw-lock connector M2 (2 uds) |
1 x | Cierre cabina aluminio Ø5, I=16 mm |
2 x | Canopy Lock V1 M3 Blue (2 pcs) |
1 x | Steering arm 16 mm Ø 4 mm |
2 x | Locking cable tie 2.5x100 (uds) |
2 x | Cierre cabina aluminio Ø4, I=10 mm |
1 x | Screw-lock connector Ø 2 mm (2 uds) |
1 x | Stainless steel cable Ø 0.5 mm (2 m) |
2 x | Steering arm 16 mm Ø 3 mm (2 uds) |
2 x | Cabin latch Fox MDM1 4m (pair) |
1 x | Stainless steel cable Ø 1.3 mm (10 m) |
1 x | |
2 x | 2,5x60 mm allen screwdriver |
1 x | Cut tube |
1 x | Z Bender - S Type Tool |
2 x | Adjustable launching hook |
2 x | 2,0x50 mm allen screwdriver |
1 x | ABS tube 4.0x3.0x1000 mm |
1 x | ABS tube 18.0x16.0x1000 mm |
2 x | PROXXON - SANDING BELTS FOR BSL 220/E 120 GRIT (5 pcs) |
2 x | Towing hook |
2 x | Screwdriver for Hexagon 1,27mm |
1 x | 3,0x60 mm allen screwdriver |
1 x | Hexagonal ball head 2.0 x 50 mm |
1 x | Ball Link Plier |
1 x | Z Bender - S Type Tool |
1 x | Towing hook <3m |
1 x | ABS tube 6.0x5.0x1000 mm |
1 x | Steel tube (L 1000 mm Ø7 mm, Ø6,7 mm) |
2 x | ABS tube 5.0x4.0x1000 mm |
2 x | PROXXON - SANDING BELTS FOR BSL 220/E 80 GRIT (5 pcs) |
1 x | Green smoke canister 140 g |
2 x | White smoke bombs AX-18 (5 pcs) |
2 x | Electric rocket starters (6 pcs) |
1 x | Ball link V1 Ø7 M4/3 (6 uds) |
1 x | Aluminium coupler M2/2 with ball bearing (1 pcs) |
1 x | Threaded coupler ALU M2,5 Ø 3 (2 uds) |
3 x | Yellow smoke canister 65 g |
2 x | Yellow smoke canister 100 g |
2 x | Red smoke bombs AX-60 (5 pcs) |
4 x | Smoke set "S" |
1 x | Threaded coupler M3 (10 uds) |
2 x | Initior Receiver FRX2 Wireless |
3 x | White smoke canister 100 g |
1 x | Clevis plastico I=45 mm / hole 3mm / pin 1 (2 pcs) |
2 x | Red smoke canister 100 g |
1 x | Threaded coupler ALU M2,5 Ø 6 (2 uds) |
2 x | Parachutist |
1 x | Ball link Aluminio M3 x 3 x 5 x 18mm (6 uds) |
1 x | Threaded coupler ALU M2 Ø 4 (2 uds) |
2 x | 3l Smoke oil |
1 x | Ball link Aluminio M4 x 4 x 6 x 26mm (4 uds) |
2 x | Red smoke canister 65 g |
2 x | Aluminium coupler M2,5/2 with ball bearing (1 pcs) |
4 x | Green smoke canister 65 g |
1 x | Threaded coupler ALU M2,5 Ø 4 (2 uds) |
1 x | Z type of cable coupler Ø 2 (2 uds) |
1 x | Brass ball links BS M3 V1 (10 pcs) |
1 x | Kwik link AL M3 L:23 mm (2 pcs) + Pin Ø 1,6 mm |
1 x | Threaded coupler ALU M3 Ø 6 (2 uds) |
1 x | Clevis plastico I=44 mm / hole 3mm / pin 2 (2 pcs) |
2 x | Yellow smoke bombs AX-60 (5 pcs) |
1 x | Kwik link AL M3 con Clip (2 pcs) |
3 x | Aluminium red ball links M3 V1 (10 pcs) |
3 x | "S" set for planes |
1 x | Kwik link AL M2,5 L:23 mm (2 pcs) + Pin Ø 1,6 mm |
2 x | Yellow smoke canister 140 g |
2 x | Blue smoke canister 100 g |
2 x | Parachute expulsion foam |
1 x | Threaded coupler ALU M3 Ø 4 (2 uds) |
2 x | Blue smoke canister 140 g |
1 x | Ball Link ALU M3 - RH (1 pcs) |
2 x | Ventral support for AX-18/AX-60 |
3 x | PCARD Wireless System |
2 x | Beech dowels 10 mm x 1000 mm |
1 x | Cable servo PREMIUM MAXI 1 m (blanco/rojo/azul) PVC |
1 x | Silicone 0,50 qmm servos wire Graupner(100 m) |
1 x | Canopy hinges for Discus 2c, Discus 2a, Ventus 2cx (2pcs) |
1 x | Futaba 24/30 mm servo pull-pull double arm with ball link |
2 x | Futaba 38 mm servo arm with ball link |
1 x | Servo GO-1013 MG 3.8kg |
1 x | Servo safety connector (10 pcs) |
1 x | Futaba 17 mm servo arm with ball link HITEC |
1 x | 46 mm Futaba servo arm tandem with ball link |
1 x | Rudder tandem for two Futaba servos |
1 x | Futaba 25 mm servo arm with ball link |
1 x | Servo AN-8 HBA |
1 x | Horizontal servo holder |
1 x | Servo GO-1081 MG 45 kg.cm 0.085s/60º |
1 x | SAVOX SH 0254 servo |
2 x | Servo SAVOX SA-1258 TG |
1 x | Programador FUTABA USB CIU-3 |
1 x | Futaba 3010 - Gear Set |
3 x | SAVOX SH 0255 MG servo |
3 x | Savox Brushless Servo SB-2271SG |
1 x | Servo Digital HITEC HS-5065 MG |
2 x | Servo SAVOX SH 0257 MG |
2 x | Nut M2 securing |
1 x | Red aluminium servo arm V3-Futaba 1,5inch M3 |
1 x | Red aluminium servo arm V3-Futaba 1,25inch M3 |
1 x | Blade holder upper |
1 x | Red aluminium servo arm V2-Futaba 1,75" inch M3 |
1 x | Screws M1,6x6 Allen |
1 x | Red aluminium servo arm V2-Futaba 2,0 inch |
2 x | Blue aluminium servo arm V2-Hitec 1,75" inch M3 |
2 x | Red aluminium servo arm V1-Futaba 1,5" inch M3 |
1 x | Grub screw M3x3 shouldered (2 pcs) |
1 x | Side Plate |
1 x | Autogyro Cierva C30 Spain |
1 x | Red aluminium servo arm V2-Futaba 1,5" inch M3 |
1 x | Screw M3x16 |
1 x | Tail boom |
1 x | Blue aluminium servo arm V3-Hitec 1,0inch M3 |
1 x | Blade holder lower |
1 x | Red aluminium servo arm V1-Futaba 20 mm M2 |
1 x | Side rudder |
1 x | Head lower part New |
1 x | Baering 3x8x4 |
1 x | Red aluminium servo arm V1-Futaba 1,25" inch M3 |
2 x | Gold aluminium servo arm V2-JR 1,5" inch M3 |
1 x | Gear for MICRO BB |
3 x | Gold aluminium servo arm V2-JR 1,25" inch M3 |
2 x | 89 mm double servo arm with bearing (2 pcs) |
2 x | Lead with adhesive (2 pcs) |
2 x | Crimping sleeves for cable 0.85 mm (10 pcs) |
2 x | Crimping sleeves for cable 0.70 mm (10 pcs) |
2 x | "M" set |
4 x | 38x4,5 mm wires output (2 pcs) |
2 x | 28x5 mm wires output (2 pcs) |
1 x | Snap long M2 (10 uds) |
2 x | Aluminium alloy coupler for carbon tube 6/M4 |
4 x | 11 mm Rubber pads (14 pcs) |
1 x | Starter 12v (Max 90 and 15ccm) |
1 x | Starter 12v (Max 180 and 30ccm) |
1 x | PROXXON - SANDING BELTS FOR BSL 220/E 180 GRIT (5 pcs) |
1 x | Set fresas corte Vanadium Ø 2.3/2.35 mm (3 pcs) |
1 x | ABS tube 14.0x10.0x1000 mm |
1 x | ABS tube 3.0x2.0x330 mm |
1 x | ABS tube 9.0x7.0x1000 mm |
1 x | Screwdriver for Hexagon 1,5mm |
1 x | Aluminium tube (L 1000 mm, Ø5.0 mm, Ø4.1 mm) |
1 x | Vacuum pump P1-N |
1 x | ABS tube 3.0x1.0x1000 mm |
1 x | ABS tube 4.0x2.0x1000 mm |
1 x | SERVO HOLDER |
1 x | Vacuum pump 12 CFM |
1 x | ABS tube 9.0x8.0x1000 mm |
1 x | ABS tube 7.0x6.0x1000 mm |
1 x | Starter EM Gear Power 250 |
1 x | Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm) |
1 x | Carbon tube (L 1000 mm, Ø14 mm, Ø12 mm) |
1 x | EC-Cutter |
1 x | Starter EM Gear Power 80 |
1 x | Aluminium tube (L 1000 mm, Ø7.0 mm, Ø6.1 mm) |
1 x | Tow hook for tug |
1 x | Carbon tube (L 1000 mm, Ø14 mm, Ø12 mm) |
1 x | PROXXON - SILICON CARBIDE BELTS FOR BSL 220/E |
1 x | Digital scale up to 40 kg |
1 x | Carbon tube (L 1000 mm, Ø16 mm, Ø14 mm) |
1 x | Birch plywood plate 600x300x4.0 mm |
1 x | Balsa panel 4.0x100x1000 mm |
1 x | Birch plywood plate 600x300x2.0 mm |
1 x | Fiberglass heat shield Ø 4 mm 1000 mm |
1 x | Balsa panel 1.5x100x1000 mm |
2 x | Birch plywood plate 600x300x2.5 mm |
1 x | A/C quality beech plywood 1520x750x4.0 mm |
1 x | XH 30 cm Female extension 0,25 mm2 silicone cable for 3 cell |
1 x | XH/XH 30 cm Female extension 0,25 mm2 silicone cable for 3 cell |
1 x | A/C quality beech plywood 600x300x5.0 mm |
1 x | Lite Plywood panel 600x300x2.0 mm |
1 x | Balsa panel 6.0x100x1000 mm |
1 x | Birch plywood plate 600x300x2.0 mm |
1 x | Lite Plywood panel 600x300x3.0 mm |
1 x | Pulley brass 4/1,5 (2 pcs) |
1 x | Threaded coupler M2 (10 uds) |
4 x | Aluminium blue ball links M3 V1 (10 pcs) |
1 x | 4 mm M3 red control terminal (4 pcs) |
2 x | Initior Transmitter FTX2 Wireless |
1 x | Porta Kwik link M3 3 mm (2 pcs) |
1 x | Pull-Pull complet set with CF rudder double servo arm |
1 x | Cable coupler M2,5 (2 pcs) |
3 x | AX-60 starters (5 pcs) |
2 x | Mixers smoke bombs AX-60 (5 pcs) |
1 x | 20x1000 mm Ring Strap Back To Back |
2 x | Aluminium wide washer M4 Black (4 pcs) |
2 x | 35 mm gas motor standoff |
2 x | aluminium servo arm V1-JR 1,0 inch M2 |
3 x | Aluminium cap bolt washer M4 blue (8 pcs) |
2 x | Aluminium cap bolt washer M3 red (8 pcs) |
2 x | SERVO DES 707 BB MG |
1 x | Servo mounting frame SV-1260MG |
1 x | Servo BLUE Bird BLS-H71B v2 |
1 x | Servo SAVOX SB-2290 SG |
1 x | LA500 pre-rotation gear hub |
2 x | Servo SAVOX SW-1250 MG digi |
1 x | 120x60 mm SLH KOVO wheel |
2 x | 40 mm gas motor standoff |
2 x | 5 mm gas motor standoff |
3 x | 15 mm floating pad (30 pcs) |
4 x | Aluminium wide washer M4 Gold (4 pcs) |
3 x | AL Axle Shaft 4.0x16 mm (2 uds) |
4 x | Aluminium wide washer M4 Red (4 pcs) |
2 x | Aluminium ignition bad (blue) |
2 x | 50 mm gas motor standoff |
4 x | Aluminium cap bolt washer M4 red (8 pcs) |
2 x | Aluminium cap bolt washer M3 black (8 pcs) |
3 x | 15 mm gas motor standoff |
3 x | 10 mm floating pad (72 pcs) |
3 x | Aluminium wide washer M4 Blue (4 pcs) |
3 x | 30 mm gas motor standoff |
3 x | 20 mm gas motor standoff |
3 x | aluminium servo arm V2-JR 2,0 inch M3 |
2 x | 25 mm gas motor standoff |
1 x | Servo HBS 690BB HV Digital |
1 x | SERVO DES 707 BB MG, Pignons |
2 x | Servo Robbe FS 525 BB MG HV |
1 x | SERVO DES 806 Pignons |
1 x | SERVO DES 658 BB MG |
1 x | SERVO DES 568 MG |
1 x | SERVO DES 588 BB MG |
1 x | Soporte metal para servos |
2 x | Servo SAVOX SV-1254 MG HiVolt Low Profile |
3 x | Servo BMS-4112 |
1 x | Servo SAVOX SA-128S SG |
1 x | Savox Highvoltage Brushless Servo SB-2272MG (Tail rotor) |
3 x | SAVOX SH 1250 MG servo digi |
2 x | Piñones SAVOX SH-0350 |
2 x | Servo SAVOX SV-1270 TG |
1 x | SAVOX SH 1290 MG servo digi |
2 x | Gear for D 54 |
1 x | LA500 nose |
1 x | Cierva C30 simulated motor |
1 x | Servo SAVOX SA-1256 TG |
2 x | Bearing 3x6x2,5 |
1 x | Servoholder Dymond DS 1800 MG Digital (2 pcs) |
2 x | Head lower part |
1 x | LA500 pilot-seat set |
2 x | Savox Brushless Servo SC-1251 MG |
1 x | Gear for D 200 BX |
1 x | LA500 housing-lower cyclic |
1 x | Ball joint long |
1 x | Head core |
1 x | Blade holder center GFK 0,5 mm |
1 x | Bearing housing |
1 x | Steering lever |
1 x | Fuselage Autogyro RAINBOW |
1 x | Micro screw-lock pushrod conn snap Ø 1 mm (2 uds) |
1 x | Landing gear frontal support 29x26x13,5 |
1 x | Aluminun wheel collar 2.5 mm Ø (4 uds) |
1 x | Cable grommet Ø 6.4 mm (4 uds) |
1 x | Rotorshape Elevator |
1 x | Steering arm 16 mm Ø 4 mm (2 uds) |
1 x | Tip wing protector 28x10x12 (2 pcs) |
1 x | Tip wing protector 30x10 (2 pcs) |
1 x | STEERING FRONT WHEEL SYSTEM BIDULE 55 |
1 x | Wheel collar 4 mm Ø (4 uds) |
1 x | Snap short M2 (10 uds) |
1 x | PROXXON - DRILL SET 0,5-3,2MM (10PCS.) |
1 x | Universal Filter |
1 x | Set brocas Ø 2.0-2.2-2.4-2.6 mm (4 pcs) |
1 x | Plywood sheet BEECH 600 x 300 x 2,0 mm |
1 x | BALSA leading edge 8x10x1000 mm |
1 x | Complete kit CAT 966G II WEDICO-construction-models |
1 x | Combo KAVAN PRO 3536-1000 + RAY 40 SB |
1 x | Stainless steel cable Ø 0.5 mm (20 m) |
1 x | Allen wheel collar M3x5 |
1 x | Snap for floding prop for 2 mm axi |
2 x | Canopy Latch |
1 x | Allen wheel collar M4x6 |
1 x | Control for forward wheel (MINI) |
1 x | Landing gear frontal support 25x32x16 |
1 x | Screw-lock pushrod conn snap Ø 1.5 mm (2 uds) |
1 x | Cable grommet 9.5 mm (4 uds) |
1 x | Cable grommet Ø 3.2 mm (4 uds) |
1 x | Cockpit plastic closing |
1 x | Aluminun wheel collar 6 mm Ø (4 uds) |
1 x | 100 mm rods + T patellas set for direction control |
1 x | Piston ring for DA-60 and DA-120 |
1 x | Carburetor for ZG45SL and ZG62/S/SL |
1 x | Piston ring for DA-150 |
1 x | Piston ring for ZG 26SC/EI, ZG 26SCM ZG 26SLH and Zenoah G260RC/ |
1 x | Stainless steel cable Ø 0.62 mm (10 m) |
1 x | Pick up DA50/100/150 |
1 x | BOSCH spark plug cap for DA 50-R, DA 100 and DA 150 |
1 x | Piston ring for ZG 20 and G240RC |
1 x | Set fresas corte acero-carburo Ø 1.8/2.3 mm (2 pcs) |
1 x | Prop washer for ZG45SL, ZG62/S/SL and ZG74B/ZG80B |
1 x | Set fresas corte acero-carburo Ø 0.5/1.8 mm (2 pcs) |
2 x | Mini-handed clamp |
1 x | Mini Infrared Thermomiter |
1 x | Cylinder ZG 26SC/SLH |
1 x | Spring Clip Ø25 mm |
1 x | Tool for entel |
1 x | Set brocas Ø 1.5-2.0-2.5-3.0 mm (4 pcs) |
1 x | Fresa corte diamante Ø 2.3mm (bola) |
1 x | Fresa corte diamante Ø 2.35mm (flame) |
1 x | Trailing edge BALSA 35x8x1000 mm |
1 x | Pine wood slat 5.0x5.0x1000 mm |
1 x | Pine wood slat 3.0x5.0x1000 mm |
1 x | A/C quality beech plywood 600x300x5.0 mm |
1 x | Linden wood slat 3.0x3.0x1000 mm |
1 x | Extinguisher CO2 - 2 Kg |
1 x | Propeller diller for DLE111 and DA85-150 |
1 x | Kwik link AL M3 L:40 mm (2 pcs) + Pin Ø 2,5 mm |
1 x | Rubber bushing with bracket "A" type (2 pcs) |
1 x | Kwik link AL M3 L:30 mm (2 pcs) + Pin Ø 2,0 mm |
1 x | Micro clevis 0.8 mm(10 uds) |
1 x | Kwik link with arm M5xM2,5xL30 |
1 x | Pulley brass 10/2 (2 pcs) |
1 x | Metal clevis M2,5 (10 uds) |
1 x | Micro clevis (10 uds) |
1 x | Rubber bushing with bracket "B" type (2 pcs) |
1 x | Ø 1,6 mm pin for Kwik link MPJ2160/2161 (6 pcs) |
1 x | Kwik link aluminio IZD. M3 L: 30mm (2 uds) pin Ø 2 mm |
2 x | AX-60 starters (5 pcs) |
2 x | Wing tips support for AX-18/AX-60 (2 pcs) |
1 x | A/C quality beech plywood 600x300x6.0 mm |
1 x | Red aluminium servo arm V3-Futaba 3,5inch |
1 x | Suction funnel for carburetor 90D-M (red) |
1 x | Fully Threaded Steel Rod SUS303 70mm M3 (2 pcs) |
1 x | wire tensioner (red) |
2 x | 10 mm gas motor standoff |
1 x | Fuel line plugs (Black) |
1 x | Fully Threaded Steel Rod SUS303 65 mm M3 (2 pcs) |
2 x | Aluminium cap bolt washer M3 green (8 pcs) |
1 x | Wing bolts M6 Steel screw Blue (2 pcs) |
1 x | 10 mm Quick clamp_L (6 pcs) |
1 x | Red aluminium double servo arm FUTABA 40 mm M3 F3A |
1 x | Plastic caps for AIR BURTS (30 pcs) |
1 x | White smoke canister 140 g |
1 x | B4-0 rocket charges (6 pcs) |
1 x | Green smoke canister 100 g |
1 x | White smoke canister 65 g |
1 x | White smoke bombs AX-60 (5 pcs) |
1 x | Remote electric ignition system |
1 x | Switch Cap M (silver) |
1 x | One touch canopy lock |
2 x | Aluminium wide washer M3 gold (4 pcs) |
1 x | Fully Threaded Steel Rod Duralumin 80 mm M3 (2 pcs) |
1 x | Ø 50-60 mm canister holder |
1 x | FUTABA 20 mm servo arm with ball link |
1 x | White smoke bombs AX-3 (10 pcs) |
1 x | White smoke bombs AX-9 (10 pcs) |
1 x | "S" set for boats |
1 x | Red aluminium servo arm V2-Futaba 17 mm iM2 |
1 x | Secraft Fuel system v2, red color |
1 x | Gold aluminium servo arm V1-JR 1,25" inch M3 |
1 x | Blue Aluminium double servo arm V3-Hitec 3-3,5inch |
1 x | Rudder 2_Tray 4~4.5 inch |
1 x | Red aluminium servo arm V3-Futaba 3-3,5inch |
1 x | Suction funnel for carburetor WALBRO 20-80cc (blue) |
1 x | Rudder 2_Tray 3~3.5 inch |
1 x | Marker ties (20 pcs) |
1 x | Transmitter Balancer Futaba V |
1 x | SUS wire 3m (nylon coated) |
1 x | Wing bolts M3 Steel screw blue (2 pcs) |
1 x | Wheel 38 mm V2 |
1 x | Red aluminium servo arm V2-Futaba 1,25" inch M3 |
1 x | Red aluminium servo arm V2-Futaba 1,0" inch M3 |
1 x | Switch Cap L (black) |
1 x | Transmitter Stick Ends V4 Blue/Silver - M3 (2 pcs) |
1 x | Transmitter Stick Ends V5 Blue - M3 Futaba/Hitec/Spektrum DX8 (2 |
1 x | Blue aluminium servo arm V2-Hitec 1,0 inch M3 |
1 x | Switch Cap M (blue) |
1 x | Transmitter Balancer SPK DX-8 |
1 x | Aluminium wide washer M3 blue (4 pcs) |
1 x | Gold aluminium double servo arm JR/Graupner 40 mm M3 F3A |
1 x | FuelTank Cap (red) |
1 x | Red aluminium servo arm V1-Futaba 1,0" inch M2 |
1 x | Fuel Fittings-Red |
1 x | Aluminium cap bolt washer M4 green (8 pcs) |
1 x | Fully Threaded Steel Rod Duralumin 70 mm M3 (2 pcs) |
2 x | Aluminium cap bolt washer M3 blue (8 pcs) |
1 x | Fuel line plugs (Blue) |
1 x | Wing bolts M3 Steel screw Red (2 pcs) |
1 x | Fuel line plugs (Red) |
2 x | Aluminium wide washer M3 red (4 pcs) |
1 x | Motor mount M |
1 x | Fully Threaded Steel Rod Duralumin 90 mm M3 (2 pcs) |
1 x | M3-M4 rubber washer (8 pcs) |
1 x | Ø 65-75 mm canister holder |
2 x | Aluminium ignition bad (red) |
1 x | Wire easy tensioner (red) |
1 x | Aluminium battery holder red |
1 x | Landing gear axle 4x21 4 mm (2 uds) |
1 x | Fuel line plugs (Silver) |
1 x | Fully Threaded Steel Rod Duralumin 110 mm M3 (2 pcs) |
1 x | Gold aluminium servo arm V2-JR 1,0" inch M3 |
1 x | Fuel Fittings-Gold |
1 x | Wing bolts M6 Steel screw Red (2 pcs) |
1 x | Receiver bed (Blue) |
1 x | Wire easy tensioner (silver) |
1 x | Fully Threaded Steel Rod Duralumin 60 mm M3 (2 pcs) |
1 x | 6 mm Quick clamp_S (10 pcs) |
1 x | Motor Mount for Multiplex FunJet |
1 x | Fully Threaded Steel Rod Duralumin 120 mm M3 (2 pcs) |
1 x | Servo ROBBE FS-31 Pico Servo |
1 x | Servo SAVOX SV-1273 TG |
1 x | Savox HV Brushless Servo SB-2270SG (Swashplate) |
|
17,420.83EUR |