1 x | Spinner plastic black fixed propeller 30 mm |
2 x | 42 mm white plastic spinner for fixed propeller |
1 x | Spinner plastic white fixed propeller 30 mm |
1 x | 36 mm red plastic spinner for fixed propeller |
1 x | 45 mm white plastic spinner for fixed propeller |
1 x | 50 mm black plastic spinner for fixed propeller |
1 x | 45 mm black plastic spinner for fixed propeller |
1 x | 36 mm white plastic spinner for fixed propeller |
1 x | 40 mm white plastic spinner for fixed propeller |
1 x | Screwdriver for Torx® TX6 |
1 x | Liston HAYA 8 x 8 x 1000 mm |
1 x | BALSA trip 2.0x10.0x1000 mm |
1 x | BALSA triangular 10x10x1000 mm |
2 x | Digital scale up to 40 kg |
1 x | Pine wood slat 5.0x5.0x1000 mm |
2 x | Dust collector for mould cleaning |
1 x | 2,5x60 mm allen screwdriver |
1 x | OBECHI sheet 2.0x3.0x1000 mm |
1 x | Starter EM Gear Power 250 |
2 x | BALSA leading edge 8x10x1000 mm |
2 x | 3,0x60 mm allen screwdriver |
1 x | Screwdriver for Torx® TX8 |
1 x | Vacuum pump P1-N |
2 x | Digital precision scale up to 2000 g |
1 x | Z Bender - S Type Tool |
1 x | PROXXON - SANDING BELTS FOR BSL 220/E 180 GRIT (5 pcs) |
1 x | Hot Glue Stick BLACK |
1 x | Vacuum pump 12 CFM |
2 x | Linden wood slat 3.0x3.0x1000 mm |
2 x | Starter EM Gear Power 80 |
1 x | Mahogany wood slat 1.5x1.5x1000 mm |
1 x | Mahogany wood slat 2.0x2.0x1000 mm |
1 x | Pine wood slat 1.5x3.0x1000 mm |
1 x | Pine wood slat 3.0x7.0x1000 mm |
1 x | Crimping tool |
1 x | BALSA trip 10x10x1000 mm |
1 x | Screwdriver for Hexagon 1,5mm |
2 x | BALSA trip 2.0x2.0x1000 mm |
1 x | BALSA trip 3.0x5.0x1000 mm |
1 x | Starter 12v (Max 90 and 15ccm) |
1 x | Beech dowels 10 mm x 1000 mm |
2 x | Disposable Injector Bags (30x16cm) 100 pcs |
1 x | Walnut wood slat 2.0x2.0x1000 mm |
3 x | Liston HAYA 3 x 10 x 1000 mm |
1 x | BALSA triangular 6x6x1000 mm |
2 x | PROXXON - SANDING BELTS FOR BSL 220/E 80 GRIT (5 pcs) |
2 x | Trailing edge BALSA 35x8x1000 mm |
2 x | |
2 x | Ball Link Plier |
2 x | Beech dowels 4.0 x 1000 mm |
1 x | BALSA trip 3.0x3.0x1000 mm |
1 x | BALSA triangular 8x8x1000 mm |
2 x | 1,5x50 mm allen screwdriver |
1 x | Pine wood slat 3.0x5.0x1000 mm |
1 x | Starter 12v (Max 180 and 30ccm) |
1 x | BALSA trip 8.0x8.0x1000 mm |
2 x | Crimping tool |
2 x | Starter Sullivan-STAR 601 |
1 x | Pine wood slat 2.0x2.0x1000 mm |
2 x | ARAMID honeycomb 1300x2600x2 mm |
1 x | Carbon Non-Woven, 160 g/m² 100 cm 25 m |
1 x | Fibra carbono tela 160g/m2 100 cm x 2 m (twill weave) |
1 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m |
1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 20 m |
1 x | Carbon fabric 160 g/m² (twill weave) 127 cm, roll/ 10 m |
2 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 100 m |
2 x | Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m |
2 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x6.0 mm (5 pcs) |
1 x | Demoulding wedge red (40 x 20 mm) 5 pcs |
2 x | Carbon fibre sleeve 12k 170 mm x 5m |
1 x | "Y" charging 4mm wire (2 IN-1 OUT). |
1 x | Red copper lacquer wire Ø0,2 mm (5 m) |
1 x | Cabel charger transmitter GRAUPNER |
1 x | 2 LiPo XH>EH adapter |
2 x | CM-3 |
1 x | 3 copper lacquer wire Ø0,2 mm (1 m) |
1 x | DUPLEX USBa USB-Adapter for Jeti Duplex Items |
1 x | CellPRO 4S Adaptader (GP/KO up to 4S) |
2 x | Red smoke canister 65 g |
2 x | Blue smoke canister 140 g |
1 x | Yellow smoke canister 140 g |
1 x | White smoke bombs AX-18 (5 pcs) |
1 x | Smoke set "M" |
1 x | PCARD Wireless System |
2 x | Mixers smoke bombs AX-60 (5 pcs) |
1 x | Black smoke bombs AX-60 (5 pcs) |
2 x | 3l Smoke oil |
1 x | Electric rocket starters (6 pcs) |
1 x | "S" set for boats |
2 x | Initior Transmitter FTX2 Wireless |
2 x | Blue smoke canister 100 g |
2 x | Extension silicon 30 cm male (Graupner) |
1 x | Cabel "Y" 30 cm (Futaba) |
1 x | Extension silicon 10 cm (Futaba) |
1 x | Extension silicon 35 cm male (Futaba) |
1 x | silicon 100 cm Futaba Extension Ø 0,35 mm |
1 x | Premium servo extension 100cm |
3 x | Cable S.BUS 3 salidas 100 mm |
1 x | Circlick securite |
2 x | Extension silicon 100 cm (Graupner) |
1 x | Extension lead 15 cm Multiplex |
1 x | Extension silicon 30 cm female (Graupner) |
1 x | Wing-connector: Glass / Carbon tube (26.5/25 x 25/23) x 1000 mm |
1 x | Cabel "Y" 30 cm (graupner) |
1 x | Futaba male 40 cm extension |
2 x | Premium servo extension 50cm |
1 x | Extension 100 cm (Futaba) |
1 x | Prolongador S-Bus JR/JR 10cm |
1 x | Cable silicona macho batt. receptor 30 cm (Futaba) |
2 x | Cable S.BUS 3 salidas 300 mm |
2 x | Extension S-Bus 1-2 silicon 120 cm FUTABA |
1 x | Extension 15 cm (Futaba) |
1 x | Extension silicon 100 cm (Futaba) |
2 x | Prolongador S-Bus JR/JR 20cm |
1 x | Extension silicon 10 cm (Graupner) |
1 x | Premium servo extension 25cm |
1 x | Futaba Female 40 cm extension |
1 x | Glases Ace |
1 x | ABS "T" angle 10.0x10.0x1000 mm |
1 x | Straightened rod Ø 0.8 mm x 1000 mm |
2 x | Mini-handed clamp |
2 x | Kwik link unmount tool |
1 x | BALSA trip 5.0x5.0x1000 mm |
3 x | Heli blades angle measurer |
2 x | Mold plugs XT-90 |
2 x | Set fresas corte acero-carburo Ø 1.8/2.3 mm (2 pcs) |
2 x | Mold plugs XT-30 |
3 x | PROXXON - SAW BLADE DIAMOND OZI/E |
1 x | PROXXON - SAW BLADE (50MM - 20T) (28017) |
2 x | Balsa panel 2.5x100x1000 mm |
1 x | Smart Soldering Iron 110W/230V AC |
2 x | MPX plug mold V1 |
2 x | Dremel PERMAGRIT thin lime |
2 x | Universal Filter |
1 x | Styrene plate 320x120x1.0 mm |
1 x | Carbon roving DowAksa / 24k / 1600 tex |
2 x | Thermoforming sheet 0.3mm (0.039in) DIN A4 |
1 x | Chopped glass fibre strands 3 mm |
1 x | Fibra de vidrio 80 g/m² (5 m x 100 cm) |
1 x | Glass fabric 49 g/m² (Finish FE 800, plain) 110 cm x 3m |
1 x | Z Bender - S Type Tool |
1 x | Mahogany wood slat 3.0x3.0x1000 mm |
1 x | Carbon fabric 245 g/m² (twill weave) 127 cm, roll/ 10 m |
1 x | Chopped glass fibre strands 3 mm |
1 x | Fibra de vidrio 80 g/m² (10 m x 100 cm) |
1 x | BALSA trip 4.0x4.0x1000 mm |
1 x | Fiberglass 163 g/m² 1m x 20 m (Aero, finish FK 144, plain) |
1 x | Pine wood slat 3.0x10.0x1000 mm |
1 x | Parachutist |
2 x | Hexagonal ball head 2.0 x 50 mm |
1 x | Extension MPX-MPX 20 cm |
1 x | Oracover light Grey 2m |
1 x | White smoke bombs AX-60 (5 pcs) |
2 x | Green smoke canister 65 g |
2 x | 2,0x50 mm allen screwdriver |
1 x | Green smoke canister 100 g |
1 x | Red smoke bombs AX-60 (5 pcs) |
1 x | Parachute expulsion foam |
1 x | AX-60 starters (5 pcs) |
1 x | Smoke set "S" |
1 x | Remote electric ignition system |
1 x | 200 mm extensión servo HITEC/JR |
2 x | Wing-connector: Glass / Carbon tube (13.7/12.5) x 1000 mm |
1 x | Futaba Female 40 cm extension |
1 x | MG cannon 1.8 cm (5 pcs) |
1 x | Aero-Master Cabine (Aero-naut) |
1 x | Tirpiz Battleship 1:200 |
1 x | Extension silicon 30 cm male (Futaba) |
1 x | Cabel "Y" 15 cm |
1 x | servo adapter lead, JST-SH socket - JR male Pin, for GR-12SH+HoT |
1 x | Extension PVC 150 cm (Graupner) |
2 x | Heat Seal Iron |
2 x | Sealing Iron Profi LCD |
2 x | PROXXON - TRIANGLE / DELTA SANDING MACHINE OZI/E |
1 x | Hot Glue Stick RED |
1 x | Hot Glue Stick GREEN |
1 x | Heli digital angle measurer |
2 x | VIPER JET G2 Esq. 5 Green/White/Blue |
2 x | Lite Plywood panel 600x300x3.0 mm |
1 x | Foam plastic plates (310x210x2 mm) |
2 x | VIPER JET G2 Esq. 2 White/Red |
2 x | Transmitter Crystal 35 Mc/s Ch 62 |
2 x | A/C quality beech plywood BIRCH 600x300x1.0 mm |
1 x | quality beech plywood BIRCH 600x300x2.0 mm |
3 x | TA1200 Charger Compatible with Smart and Standard LiPo Batteries |
3 x | USB Charger 12V DC for car |
1 x | Propeller diller 5/6,3/8/9 |
1 x | PERMAGRIT Sanding Block 45° 140x51 mm |
1 x | Mini Lock Grips 2PCS |
1 x | Propeller drill jig DA 100/85/120/150/200 and VM 60-210 |
3 x | Mini Infrared Thermomiter |
1 x | HAWK 100 ARF scale 1:4.75 2480 mm - PAINTED AH106 |
2 x | Propeller diller for EME35 and DLE35 |
1 x | Propeller diller for DLE111 and DA85-150 |
1 x | Modelling compound (Plastilin), sculptor's quality 1 Kg |
2 x | 9x4.7 * 22x12 carbon propeller |
1 x | Propeller drill jig DA-35/50/60/70 |
1 x | Propeller diller for DA50, DLE55 red |
1 x | VIPER JET 2.2m + Electric landig Gear Deco: 01 Red-Blac-kWhit |
2 x | F-16 Scale 1/6 G3 Airex Deco: AF 916F |
1 x | Precision wrench L100 mm |
1 x | PROXXON - SANDING BELTS FOR BSL 220/E 120 GRIT (5 pcs) |
1 x | PROXXON - DRILL SET 0,5-3,2MM (10PCS.) |
1 x | Heli blades angle measurer |
1 x | Pipa 3D F-16 Scale 1/6 |
2 x | Spikes Band (5 m) |
1 x | VIPER JET G2 Esq. 3 Orange/Black |
1 x | A/C quality beech plywood 1520x750x4.0 mm |
2 x | Propeller G-Sonic 20x8 |
2 x | Decorative caps, multicoloured, short |
4 x | Foreman, scale 1:32 |
3 x | VIPER 1.7 Tailpipe + Fuel Tank 1500ml |
1 x | Conector JAPAN G2 Set 5 pares |
2 x | Birch plywood plate 600x300x2.5 mm |
1 x | A/C quality beech plywood 600x300x0.6 mm |
3 x | Charger LiPo Charger4 |
1 x | Birch plywood plate 600x300x4.0 mm |
2 x | Balsa panel 8.0x100x1000 mm |
2 x | Receiver replacement antenna, approx. 15 |
1 x | A/C quality beech plywood 600x300x1.5 mm |
2 x | MZ-10, 5 Channel HoTT |
1 x | Flap hinge 33x9 mm (6 pcs) |
1 x | Manometer 4 mm |
2 x | A/C quality beech plywood 600x300x5.0 mm |
1 x | Receiver replacement antenna, approx. 85 |
2 x | A/C quality beech plywood 1520x750x3.0 mm |
1 x | Beech dowels 2.0 x 1000 mm |
3 x | 40 mm 1/4" Race propeller (rigth hydropropeller) |
3 x | Flap hinge (6 pcs) |
1 x | Balsa panel 2.0x100x1000 mm |
3 x | Aluminium sheet 500x250x0,5mm |
3 x | VIPER JET G2 Esq. 2 Red/White/Silver |
2 x | Hose clips 6 mm |
2 x | Birch plywood plate 600x300x4.0 mm |
2 x | Quick hose connector 6-4 mm |
2 x | Birch plywood plate 600x300x2.0 mm |
2 x | A/C quality beech plywood 600x300x0.8 mm |
2 x | A/C quality beech plywood 600x300x0.8 mm |
1 x | VIPER 1.7 Electric break wheels + structure |
2 x | A/C quality beech plywood 600x300x5.0 mm |
1 x | Propeller Pleg CAM-Prop 8x6 |
1 x | Birch plywood plate 600x300x1.2 mm |
2 x | A/C quality beech plywood 600x300x6.0 mm |
3 x | Balanceradapter JST-XH (Heli 47G) 2-6 c. |
2 x | Adjustable brass horn threaded M3 |
2 x | MZ-18, 9 Channel HoTT |
1 x | A/C quality beech plywood 600x300x6.0 mm |
2 x | Propeller Pleg CAM-Prop 10x6 + Spinner |
2 x | Distanzstück motor OS 120 AX |
1 x | Spinner fixed propeller 60 mm / 5,0 mm |
2 x | 55% silver electrodes (2 pcs) |
1 x | Cable adapter iCharger |
2 x | USB Charger 120-240V AC |
1 x | Jun-Si iCharger 4010 Duo |
1 x | Jet Pipe 40N-80N (200 mm) |
1 x | Pendulun "Special" to tank 60g |
2 x | Breatex™ Non-woven absorber 300 g/m² Roll 41 m |
1 x | ABS 500 x 400 x 0,5 mm (white) |
1 x | Vacuum Connection VA 1 (for hose Ø 6 mm) |
1 x | ABS 500 x 400 x 1,5 mm (white) |
1 x | Breatex™ Non-woven absorber 150 g/m² Roll 20m |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x4.0 mm (5 pcs) |
1 x | DUPLEX 2.4EX Central Box 320 |
1 x | Servo HITEC HS-125 MG |
1 x | Servo HITEC D131 MW nano |
1 x | Receptor MINIMA 6S HITEC |
1 x | Servo HITEC D941 TW |
1 x | HPP-21 PLUS PC and Field Programmer for Hitec Digital Servos |
1 x | Servo HITEC HS-225 MG |
1 x | HPP-21 PLUS PC Programmer for Hitec Digital Servos |
1 x | Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 15 m |
1 x | Cargqador GensAce IMARS III Pro Smart Balance RC |
1 x | Yellow smoke canister 100 g |
1 x | DUPLEX 2.4EX Central Box 220 |
1 x | DUPLEX 2.4EX Central Box 220 + 2x Rsat2 + RC Switch |
1 x | Gear set HITEC HS-311/322/325BB |
1 x | Servo HITEC HS-5585MH |
1 x | Gear set HITEC D645 MW |
1 x | Gear set HITEC HS-65 HB |
1 x | Gear set HITEC HS-225 |
1 x | Servo case HS-225MG/225BB/5245MG |
1 x | Servo HITEC HS-311 |
1 x | Servo Digital HITEC HS-5065 MG |
1 x | Servo HITEC D85 MG |
1 x | Gear set HITEC HS-81 |
1 x | HPP-25 PLUS PC Programmer for Hitec Digital Servos Field Program |
1 x | HITEC DPC-11 programmer |
1 x | Servo HITEC D951 TW |
1 x | Gear set HITEC HS205/225MG/5245MG/7245MH |
1 x | Servo HITEC D-955 TW Titanium |
1 x | HPP-21 PLUS PC Programmer for Hitec Digital Servos |
1 x | Receiver Hitec OPTIMA 9 2.4 GHz AFHSS 9ch |
1 x | Gear set HITEC HS-55 |
1 x | Servo HITEC D145 SW |
1 x | Servo HITEC D954 TW |
1 x | Servo HITEC D625 MW |
1 x | Gear set HITEC HS-7950TH |
1 x | Charger HITEC CG-42 TX 7.2v/ RX 4.8v (80 mA) |
1 x | Gear set HITEC HS-645MG/5645MG/5685MH |
1 x | Gear set HITEC HS-56 HB |
1 x | Servo HITEC HS-225 BB |
1 x | Gear set HITEC HS-85 |
1 x | 4 LiPo XH>EH adapter |
1 x | Smoke set "Glider" |
1 x | White smoke bombs AX-3 (10 pcs) |
1 x | White smoke canister 100 g |
2 x | Brass hexagonal rod Ø 5 mm x 1000 mm |
1 x | Brass hexagonal rod Ø 3 mm x 1000 mm |
1 x | Charger GensAce IMARS Dual Channel AC200W/DC300Wx2 |
1 x | Ball Link Plier |
1 x | Fresa corte diamante Ø 2.35mm (flame) |
2 x | Concave-Convex sandpaper file 13 mm |
1 x | Set fresas corte Vanadium Ø 2.3/2.35 mm (3 pcs) |
1 x | Roller cutter 28 mm |
1 x | silverlot 45% - 1,50x500 mm solder rods (2 pcs) |
1 x | A/C economy plywood 600x300x6+.0 mm |
2 x | Transmitter GRAUPNER MZ-24 Pro |
2 x | Canopy Latch |
1 x | Carbon plate 350x150x3.0 mm |
1 x | Receiver Crystal 35 Mc/s Ch 62 |
2 x | Transmitter Crystal 35 Mc/s Ch 77 |
1 x | Propeller CFK 14.5x10 Slim |
1 x | Propeller CFK 13x9 |
1 x | Propeller CFK 17x18 |
1 x | Propeller CFK 12.5x7 |
1 x | Exhaust K45TP |
1 x | Kerostarter K30G |
1 x | Scale exhaust K100TP |
3 x | Beech dowels 3.0 x 1000 mm |
1 x | Sub-D Plug Mold |
2 x | Sandpaper file 13 mm |
1 x | Carbon fiber rod 0.5 mmx1000 mm |
1 x | Carbon fiber rod 5.0 mmx1000 mm |
1 x | Balsa panel 1.5x100x1000 mm |
1 x | Birch plywood plate 600x300x3.0 mm |
1 x | Lite Plywood panel 600x300x2.0 mm |
1 x | Propeller RF CFK 14.5x14 |
1 x | Propeller CFK 20x13 "white" |
1 x | Propeller CFK 15x13 Slim |
1 x | Brass rod Ø 0.5 mm x 1000 mm |
1 x | Brass rod Ø 1.5 mm x 1000 mm |
1 x | Brass rod Ø 1.0 mm x 1000 mm |
1 x | Brass rod Ø 0.8 mm x 1000 mm |
1 x | POWER PEAK D7 EQ-BID 12V/230V-Duo Charger |
2 x | Fresa corte diamante Ø 1.0mm (bola) |
2 x | Dremel PERMAGRIT 18 mm round lime |
1 x | Fresa corte diamante Ø 1.4mm (bola) |
1 x | 22 mm Cut Disc Proxxon/Dremmel |
1 x | |
1 x | Fresa corte diamante Ø 2.3mm (bola) |
2 x | Extra Hard Titanium Herxagon Screwdrivers |
1 x | Cut tube |
1 x | 100g Flux Paste for Silver Solder |
1 x | |
1 x | Fresa corte diamante Ø 2.35mm (lentil) |
1 x | Goma arrancador Ø36 mm x 30 mm |
1 x | Propeller POWER-PROP 7x7 |
1 x | PROXXON - SAW BLADE HSS (50MM - 100T) (28020) |
1 x | UHU hart 35 g |
1 x | Foam plastic plates (310x210x3 mm) |
1 x | Set brocas Ø 1.5-2.0-2.5-3.0 mm (4 pcs) |
1 x | Set brocas Ø 0.4-0.6-0.8-1.0 mm (4 pcs) |
1 x | Aluminium tube (L 1000 mm, Ø3.0 mm, Ø2.1 mm) |
1 x | Spare round blades, 28 mm, pack/ 2 pcs. |
1 x | Pump hose (Ø 6/8 mm) transparent |
1 x | Sealing Iron Sleeve STD |
1 x | Contest-S-Pult-Carbon mc-20/mc-24 |
1 x | PROXXON - SILICON CARBIDE BELTS FOR BSL 220/E |
1 x | 28 mm tailwheel unit |
1 x | Hard brass tubing (L 1000 mm, Ø10.0 mm, Ø9.1 mm) |
1 x | Straightened rod Ø 8.0 mm x 1000 mm |
1 x | Birch plywood plate 600x300x2.0 mm |
1 x | Plywood sheet BEECH 600 x 300 x 2,0 mm |
1 x | Coupling bush 5 - 5 mm |
1 x | 40,0 mm hydro-propeller (left hydropropeller) |
1 x | Balsa panel 5.0x100x1000 mm |
1 x | Balsa panel 6.0x100x1000 mm |
1 x | Balsa panel 10x100x1000 mm |
1 x | Birch plywood plate 600x300x3.0 mm |
1 x | Propeller hub spacer 8/5.5 |
1 x | Spinner fixed propeller 42 mm / 5,0 mm |
1 x | Balsa panel 4.0x100x1000 mm |
1 x | Balsa panel 1.0x100x1000 mm |
1 x | Balsa panel 3.0x100x1000 mm |
1 x | Propeller CFK 18x19 |
1 x | Propeller RF CFK 16x8,5 S |
1 x | Propeller CFK 16x16 Wide |
1 x | Propeller CFK 15x15 |
1 x | Propeller CFK 16x17 |
1 x | Propeller CFK 12.75x13 |
1 x | Propeller CFK 12X6 |
1 x | Propeller CFK 15x13 |
1 x | Propeller CFK 15x7 |
1 x | Propeller CFK 14x7 |
1 x | Propeller CFK 14x10 |
1 x | Propeller CFK 16x16 Slim |
1 x | Propeller CFK 20x13 |
1 x | Propeller CFK 11x8 |
1 x | Propeller CFK 18x9 |
1 x | Turbine KINGTECH K85 G4 |
1 x | Turbine KINGTECH K100 G4 |
|
51,114.03EUR |