1 x | Fiberglass plate 620x540x0,2 mm |
1 x | CRACK YAK (Mini) 600 mm |
3 x | Motor DLE 200cc Std |
2 x | Micro Tarjeta SD Rapid Rush 16 GB |
3 x | Manual Controller |
4 x | Small Crow DLE-170M |
1 x | Fiberglass plate 620x540x0,3 mm |
1 x | PC-6 Pilatus Porter Big "Fredi" (PICHLER) |
1 x | Battery LiPo TATTU 1300 mAh 4S 14,8V 75C |
1 x | Demoulding wedge red (40 x 20 mm) 5 pcs |
1 x | ACTIVE ARF Electric 1.995 mm |
2 x | Silent-blocks DLE 170M |
1 x | LUCAS pilot ARTF |
2 x | Swift ARF 2000 mm Red (Hacker Model) |
1 x | Aluminium servo arm (2 uds) |
1 x | Eachine EV800D 5 Inches 800x480 FPV VR Goggles Monitor |
2 x | Motor DLE 200cc Premium Muffler |
2 x | Wing OXY 0,5 pulgadas2 |
2 x | Motor DLE 430 cc - Paramotors |
1 x | Suport PITOT |
1 x | Remolcador "Jonny Hafenschlepper" |
1 x | Fiberglass plate 620x540x1,0 mm |
1 x | Futaba Radio Case |
2 x | Cable video GoPro |
1 x | Para-RC Mix |
1 x | PowerBox 12 |
1 x | Strut Set HAWKER HUNTER 1:5,8 (without wheels) |
1 x | Teflon rollers 40 mm x 15 mm Diam. |
2 x | 5.8G Receiver Helical Antenna with protecting case (SMA plug) 12 |
1 x | Windsock Ozone L - 700 mm |
3 x | Anntena Panel 5,8 GHz - 14 dBi |
1 x | 3-Blade Spinner 85 x 80 mm GFK |
1 x | MXS-C (Mini) Blue |
1 x | Compact on-board starting system (9724) |
1 x | CNC FPV Display screen&Transmitter Holder Vertical |
2 x | Bags de Luxe ULTIMATUM 2.0 |
2 x | Brake disc Electron Retracts |
1 x | Set cintas unión paracaídas 145 cm |
2 x | Gates hinge aluminium (1 pcs) |
1 x | DINO Glider ARC |
3 x | Wing OXY 5,0 m2 |
1 x | Big-Malibu XL Roof box with surfboard rack GREY |
2 x | Miss ULTIMATE 50E Yellow/Black |
1 x | TX 250 mW especial GOPRO |
1 x | Para-RC "RC-Evo-Cross" Rescue |
1 x | Cable video GoPro and 5V cable |
2 x | Motor DLE 170 M- Paramotors |
2 x | Opale Rucksack |
1 x | Carbon/kevlar tube 3K-PW (L 1500 mm, Ø25 mm, Ø22.5 mm) |
1 x | Intairco CMB Super Filter - 6mm Barb |
1 x | Paramotor Trike XL |
1 x | Piston ring for DLE-20 RA |
1 x | PVC transparent battery termo-retract 195 mm (1 m) |
1 x | Kit repair carburator DLE-170 |
1 x | Wing-connector: Glass / Carbon tube (26.5/25 x 25/23) x 1000 mm |
1 x | Parachute PV6 for F3J |
2 x | Electromagnets brake |
1 x | Ignition unit for DA-70/100/120/150/170/200 |
1 x | RB-45 Electronic |
2 x | Motor OS 3820-1200 electric |
1 x | Breatex™ Non-woven absorber 150 g/m² Roll 5 m |
2 x | Big Crow DLE-170M |
2 x | PIX Hawk with accesories |
1 x | Propeller RABOESCH.Ms 20mm/M3r 5-BL (rigth hydropropeller) |
2 x | Miss ULTIMATE 50E Red/Black |
1 x | Parachute BACKUP X100 |
1 x | Ferrita 27x14x7 mm |
2 x | Antenna Cloverleaf 5.8 GHz Tx - Rx |
1 x | Ferrita 17x10x6.5 mm |
2 x | Ferrita con funda |
3 x | Cooler motor type 400 |
2 x | Ø 38 mm fiberglass motor-holder for electric motors |
1 x | SCHARNHORST Battleship 1:200 |
2 x | Indoor motor holder |
1 x | Motor mount for 1200 mm models |
2 x | Size "L" motor holder for class 600 |
2 x | Cables suitable for the motor AC 28/7 |
1 x | |
2 x | Fan for A60 |
1 x | Size "M" motor holder for class 400 |
4 x | Cooler motor type 150 |
1 x | Motor Mount for Multiplex FunJet |
1 x | Motor holder for AC 28/7 |
1 x | Frontal support Speed 280 |
1 x | Ø 40 mm fiberglass motor-holder for electric motors |
1 x | Motor mount M |
1 x | 10 mm gas motor standoff |
1 x | Size "M" motor holder for class 600 |
1 x | Receiver bed (Blue) |
1 x | Wing-connector: Glass / Carbon tube (13.7/12.5) x 1000 mm |
1 x | AXI 2808/24 V2 Long |
1 x | AXI 2826/10 V2 |
2 x | AXI 2826/10 V2 Long |
2 x | AXI 2814/6D V2 |
1 x | AXI 2808/16 V2 Long |
1 x | AXI 2826/8 V2 Long |
1 x | AXI 2808/20 V2 |
1 x | Extractor piñones 2.3/3.2 mm |
1 x | AXI 2814/12 V2 |
2 x | VBar Control Touch, midnight black |
3 x | AXI 2212/26 V2 |
1 x | AXI 2217/20 V2 |
1 x | AXI 2814/10 V2 Long |
1 x | DA 85 / DA 100 / DA 100 L carburetor |
1 x | Suction funnel for carburetor 90D-M (red) |
2 x | AXI 2808/20 V2 Long |
1 x | AXI 2217/16 V2 |
1 x | AXI 2814/16 V2 |
1 x | AXI 2808/24 V2 |
2 x | AXI 2826/12 V2 Long |
1 x | Surprise XII Horizontal Estabilizer (Freudenthaler) |
1 x | Electric spoiler 185 mm (2 pcs) |
1 x | Straightened rod Ø 0.8 mm x 1000 mm |
2 x | Straightened threaded rod M2-1m |
4 x | Straightened rod Ø 2.5 mm x 1000 mm |
1 x | Brass hexagonal rod Ø 4 mm x 1000 mm |
2 x | Xoar Electric Beechwood Prop 12x6 |
2 x | Straightened threaded rod M3 - 1m |
2 x | Straightened rod Ø 1.2 mm x 1500 mm |
2 x | Straightened rod Ø 0.5 mm x 1000 mm |
2 x | Straightened rod Ø 2.0 mm x 1000 mm |
2 x | Straightened rod Ø 8.0 mm x 1000 mm |
2 x | Straightened rod Ø 5.5 mm x 1000 mm |
1 x | Xoar Electric Beechwood Prop 15x8 |
2 x | Brass rod Ø 0.8 mm x 1000 mm |
2 x | Straightened rod Ø 1.5 mm x 1500 mm |
2 x | PPM Encoder Module |
2 x | Digital Air Speed Sensor And Pitot Tube Set |
1 x | PIT (Aero-Naut) |
1 x | TWIST planeador gomas |
1 x | 2,5x60 mm allen screwdriver |
1 x | Z Bender - S Type Tool |
1 x | Ball Link Plier |
1 x | Screwdriver for Torx® TX6 |
1 x | 1,5x50 mm allen screwdriver |
1 x | Dust collector for mould cleaning |
1 x | Hot Glue Stick BLACK |
2 x | 2,0x50 mm allen screwdriver |
2 x | Starter Sullivan-STAR 603 DINATRON |
1 x | Disposable Injector Bags (30x16cm) 100 pcs |
1 x | Copier 2x20 cm pcs |
1 x | Starter EM Gear Power 250 |
2 x | Digital scale up to 40 kg |
1 x | Hot Glue Stick RED |
2 x | Vacuum Connection VA 1 (for hose Ø 6 mm) |
2 x | PROXXON - SANDING BELTS FOR BSL 220/E 80 GRIT (5 pcs) |
1 x | PROXXON - SILICON CARBIDE BELTS FOR BSL 220/E |
1 x | Copier 5x20 cm pcs |
1 x | Screwdriver for Hexagon 1,27mm |
1 x | Screwdriver for Hexagon 1,5mm |
1 x | Vacuum pump 12 CFM |
2 x | Screwdriver for Torx® TX8 |
2 x | Ball Link Plier |
1 x | |
1 x | Hexagonal ball head 2.0 x 50 mm |
1 x | Crimping tool |
1 x | Z Bender - S Type Tool |
1 x | Shaft KPG25 4,2:1 |
1 x | Silicone 0,35 qmm servos wire Graupner(100 m) |
1 x | Universal Colour Paste signal white (RAL 9003) 1 Kg |
1 x | Smoke set "Glider" |
1 x | Mounting base Ms 8 mm |
1 x | Hardener EPIKURE™ Curing Agent MGS™ LH285, bottle/ 800 g |
1 x | Epoxy Resin L 285 + Hardener 285 (Aero), kit/ 1 kg |
1 x | SUPER DIMONA TC-80 |
1 x | Turbine KingTech K30G Restart |
1 x | Electric Landing Gear ULTIMATUM 2.0 (Elektron Retracts) |
2 x | Set propellers 10x4.5 SF Carbon Multicopter |
1 x | Thixotropic agent tin/ 15 g (approx. 350ml) |
1 x | CAM-Carbon Light Prop 13x6" (Prop right) |
1 x | Glass Bubbles 0.19 g/cm³ Panda, tin/ 120 g (approx. 1 l) |
2 x | Propeller Pleg CAM Carbon 12x6.5 |
1 x | Propeller Pleg CAM Carbon 14x7 |
1 x | CAM-Carbon Light Prop 10x7" |
1 x | GlassBubbles 2.5 g/cm³ Panda, tin (approx. 1 l) |
2 x | Retract undercarriage for gliders up to 2 Kg |
1 x | CAM-Carbon Light Prop 12x5" (Prop left) |
1 x | Metalic motor holder for class 550-600 |
1 x | Electric Landing Gear AVANTI XS (Elektron Retracts) |
1 x | Propeller RF CFK 16x8,5 S |
1 x | A50 Motor Mount Alu complete set |
2 x | Propeller MEJLIK 26x12 N-3 Blades |
1 x | Nylon gear block Ø 4 mm (2 uds) |
2 x | Propeller CFK 14x7 |
1 x | Propeller CFK 11x8 |
1 x | Aluminun wheel collar 3.5 mm Ø (4 uds) |
1 x | Landing gear clamp for Ø 2 mm (4 uds) |
1 x | GS-200 Electronic |
1 x | Propeller CFK 15x16 |
2 x | Propeller MEJLIK 28x10 |
1 x | Seoul Power LED 3 watts PCB Sets: 1x white, 1x red, 1x green |
1 x | Bearings for motor HACKER C50 |
1 x | Body for landing gear Ø 3 mm |
1 x | Nylon gear block Ø 5 mm (2 uds) |
2 x | Fail Safe air retract |
1 x | Propeller CFK 14x6.5 |
1 x | Disipador para motor Hacker B 20 (or motors up to Ø20 mm) |
2 x | ER-50eVo Set A [2x ER50 + RB-45] |
1 x | Propeller CFK 13x9 |
1 x | Propeller RF CFK 14.5x14 |
1 x | Air pressure gauge |
1 x | Propeller CFK 20x13 |
2 x | Propeller CFK 20x13 "white" |
1 x | Aluminun wheel collar 2.5 mm Ø (4 uds) |
1 x | 10-15mm Servo Arm |
1 x | Crimping sleeves for cable 1.3 mm (10 pcs) |
1 x | Lense for Spotlights, 20mm |
1 x | Rudder 107-06 |
1 x | U Profile ABS 8,0x4,0x1000 mm |
1 x | 290 mm M5 Prop shaft |
1 x | 8Wx2 Navigation & Strobe, 11mm Red/White |
1 x | Rigid coupling brass Ø 4.0 / 2.3 mm L: 20 mm |
1 x | Emisora JETI Duplex DS-16 II BLACK Multimode |
1 x | 42 mm central piece for 4 blades |
1 x | Harness for transmitter JETI DUPLEX |
2 x | Tool for entel |
1 x | Spare white 38-45 mm spinner |
1 x | Futaba T3PV T-FHSS |
1 x | Tachometer Hyperion Multi-pala |
1 x | AXI2203/40 VPP |
1 x | Cylinder for ZG20 |
1 x | 5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
1 x | AXI 2820/10 V2 Long |
1 x | Coupling for 4 mm axis |
1 x | T-Connector 4.0 mm x 1000 mm |
1 x | Spring clamp for tube Ø50 mm |
1 x | EXTRA NG 85" 2159mm yellow/blue |
1 x | LASER 73" 1.85m (05) PILOT |
2 x | PT-17 Stearman "Blue Army" 2950 mm 100cc |
1 x | PIPER CUB 3000 mm (TWM) |
1 x | EXTRA NG 85" 2159mm red/white |
1 x | SLICK 103" Yellow/Blue ARF (Color 2) 2630 mm |
2 x | Surprise XII Rudder (Freudenthaler) |
1 x | Sukhoi 29S 2,6 m Yellow/Black (SebART) |
1 x | Servo HITEC D645 MW |
1 x | Brass rod Ø 1.5 mm x 1000 mm |
1 x | Mini VISION "spread tow" CFK |
2 x | Cooler motor type 280 |
2 x | Straightened rod Ø 14.0 mm x 1000 mm |
2 x | SyRen 50A 6V-30V Regenerative Motor Driver |
1 x | Futaba 46 mm servo arm with ball link |
1 x | SERVO DES 588 BB MG |
1 x | Servo HITEC HS-5125 MG Slim Metal Gear Wing Servo |
1 x | Brazo servo aluminio KST 25T-5V2,3515,325,125,135,145X10,X12,A13 |
1 x | Blue aluminium servo arm V1-Hitec 1,25" inch M3 |
2 x | Aluminium rod Ø 4.0 mm x 3000 mm |
1 x | Red aluminium servo arm V2-Futaba 1,5" inch M3 |
1 x | Xoar Electric Beechwood Prop 21x10 |
1 x | Brass rod Ø 1.0 mm x 1000 mm |
1 x | SyRen 10A 6V-24V Regenerative Motor Driver |
2 x | Straightened rod Ø 1.5 mm x 1000 mm |
2 x | Straightened rod Ø 4.0 mm x 1000 mm |
1 x | Ventus 1:4 set of instruments |
1 x | Futaba 30 mm servo arm with M3 ball link |
1 x | Red aluminium servo arm V2-Futaba 1,75" inch M3 |
1 x | Brazo servo aluminio HITEC HS-125MG/5125MG |
1 x | Blue aluminium double servo arm V3-Hitec 3,5inch |
1 x | Blue aluminium double servo arm HITEC 40 mm M3 F3A |
1 x | Blue aluminium servo arm V2-Hitec 1,5 inch M3 |
1 x | Servo JETI DSHV 3D13T (13 Kg) |
1 x | Soporte metal para servos |
1 x | Brass hexagonal rod Ø 5 mm x 1000 mm |
1 x | 18 mm wing servo holder |
1 x | Gold aluminium servo arm V2-JR 1,0" inch M3 |
1 x | Servo KST X08H V5.0 HV DIGITAL Wing servo 8mm |
1 x | Propeller electric carbon 10x6 |
1 x | Rocket cardboard tube 25mm x 24mm x 230mm |
2 x | Red smoke bombs AX-60 (5 pcs) |
1 x | Propeller POWER-PROP 11x6 |
1 x | Porpeller HUNTER 480 |
1 x | Propeller electric carbon 8.5x5 |
2 x | Propeller 9x4,7 SlowFlyer |
1 x | Reductora IPS 150 DX2BB-FXCS 11,8:1 |
2 x | Yellow smoke bombs AX-60 (5 pcs) |
2 x | Foam wheel Ø 351 mm (2 pcs) |
1 x | VAGABOND 1500 mm ARF V2 (Red) |
1 x | TAKEO 3.6m electric |
1 x | Propeller 10x4,7 SlowFlyer |
1 x | Interface Realflight Simulator |
1 x | ANGEL 48" pp red/blue/white |
1 x | Ball Bearing Oil 25 ml |
1 x | Propeller 8x4,3 SlowFlyer |
1 x | Propeller 3x2 |
1 x | Adapter 3,0 mm M6 for spinner 40 mm fixed propeller |
1 x | Conector MR-60 (pareja) |
1 x | Starter EM Gear Power 80 |
1 x | EXTRA NG 74" yello/blue/red (Skywing RC) |
1 x | Crimping tool |
1 x | Propeller 11x4,7 SlowFlyer |
1 x | Adapter 4,0 mm M6 |
1 x | Threaded coupler ALU Left M3 Ø 4 (2 uds) |
2 x | Prop Holder AXI 41xx V2 |
1 x | Refueling Cap V3 Black |
1 x | Piñon motor rotor LA-500 |
1 x | LA500 nose |
1 x | Albatros ,spare fuselage (Top Model) |
1 x | Blue aluminium servo arm V3-Hitec 1,5inch M3 |
1 x | aluminium servo arm V2-JR 2,0 inch M3 |
1 x | DPSI Micro SingleBat 5.9V/7.2V F3A Edition magnetic switch |
1 x | Double aluminium servo arm V1-Futaba 2,5 inch M3 (red) |
1 x | Canopy Astra |
2 x | Servo HITEC HS-125 MG |
1 x | Servo Digital HITEC HS-5065 MG |
1 x | FUTABA 20 mm servo arm with ball link |
1 x | Red aluminium servo arm V1-Futaba 20 mm M2 |
1 x | Servo KST A15-1810 20kg/cm@8.4V / Coreless Motor |
1 x | PVC 0,14 qmm servo wire Futaba (5 m) |
1 x | PHOENIX FW-190 FOCKE WULF - 1720 MM ARF KIT |
1 x | Brass hexagonal rod Ø 3.5 mm x 1000 mm |
1 x | Servo RHINO pro SHV digi 4 |
1 x | Bidule 111 3000 mm Canopy |
1 x | Straightened rod Ø 7.0 mm x 1000 mm |
1 x | Canopy hinges for Discus 2c, Discus 2a, Ventus 2cx (2pcs) |
1 x | Servo KST X20 8.4-50 V8.0 45kg 8.4v Softstar |
1 x | Soporte servo KST X10 mini / DS135MG |
2 x | Servo HITEC HS-53 |
1 x | Servo HITEC HS-45 HB |
1 x | Red aluminium servo arm V2-Futaba 1,25" inch M3 |
1 x | Straightened rod Ø 4.5 mm x 1000 mm |
1 x | Servo HITEC D-955 TW Titanium |
1 x | Red aluminium servo arm V1-Futaba 1,25" inch M3 |
1 x | Gold aluminium double servo arm V3-JR 3.5 inch M3 |
1 x | Servo HITEC HS-5245 MG Digi |
1 x | Servo BLUE Bird BLS-H71B v2 |
1 x | Straightened rod Ø 1.0 mm x 1000 mm |
1 x | Futaba 38 mm servo arm |
1 x | Electric spoiler 440 mm (2 pcs) |
1 x | Xoar Electric Beechwood Prop 22x10 |
1 x | SERVO DES 806 Pignons |
1 x | Red aluminium servo arm V1-Futaba 17 mm M2 |
1 x | 54 mm Futaba servo arm tandem with ball link |
1 x | Cockpit metalic closing |
1 x | Futaba 24/30 mm servo pull-pull double arm with ball link |
1 x | Blue aluminium servo arm V1-Hitec 1,0" inch M2 |
1 x | Horizontal mounting servo holder |
1 x | Gold aluminium double servo arm JR/Graupner 40 mm M3 F3A |
1 x | Futaba 25 mm servo arm with M3 ball link |
1 x | Servo HITEC HS-5585MH |
2 x | Starter 12v (Max 90 and 15ccm) |
1 x | Spinner propeller pleg. 38 mm / 5,0 mm |
1 x | Motor Set CHALLENGER Indoor |
3 x | Set brocas Ø 0.4-0.6-0.8-1.0 mm (4 pcs) |
1 x | DPSI RV Mini 6 (2008) |
1 x | Brazo servo KAVAN doble aluminio 25T - 2.5" M3 |
1 x | Pilatus PC-21 2100 mm BLUE/WHITE (SebArt) |
1 x | HPP-21 PLUS PC and Field Programmer for Hitec Digital Servos |
1 x | OPTOTRONIX Aurora LCU |
4 x | Soldering tip for KAVAN soldering iron KAV66.8338 |
1 x | Prop rubber XS set 4 pieces |
1 x | Spinner Alumin. propeller pleg. 30 mm / 2,3 mm |
1 x | Motor mount class 48" |
2 x | Schul-Malpinsel Gr.5 |
1 x | JOKER 3 1550mm |
2 x | EASYGLIDER 4 RR |
2 x | Set fresas corte Vanadium Ø 2.3/2.35 mm (3 pcs) |
2 x | 30 mm Alu spinner 3 mm pleg. propeller |
2 x | DOMINO 46-55 Trainer 1583 mm |
1 x | Spinner propeller pleg. 30 mm / 4,0 mm |
3 x | Spinner propeller pleg. 42 mm / 6,0 mm |
1 x | Turbo Timber Evolution 1.5m BNF |
1 x | Servo GO-1013 MG 3.8kg |
1 x | CHALLENGER Indoor |
1 x | Transmitter JETI Duplex DS-24 EX Multimode |
1 x | Set brocas Ø 2.0-2.2-2.4-2.6 mm (4 pcs) |
1 x | DUPLEX 2,4EX Switch SAFETY 2-Position Safety DC-16/14 |
1 x | Central piece 52 mm 0º |
1 x | Transmitter JETI Duplex DS-24 EX Carbon Line Dark GREEN Multimod |
1 x | Sealing Iron Sleeve STD |
1 x | silverlot 45% - 1,50x500 mm solder rods (2 pcs) |
1 x | Central piece 52 mm - 5º |
1 x | PPM to Jack link - Tx Black (mono) DC/DS Tx DUPLEX 2,4EX |
1 x | Car Charger DC/DS-16 |
1 x | Emisora JETI Duplex DS-16 II Carbon Line YELLOW |
1 x | AIRSPEED SENSOR SBS01TAS |
1 x | TARANIS X9D - plus EU/LBT FrSky complete set w. travel case incl |
1 x | Tension Springs (4pcs.) for DC/DS Tx DUPLEX 2,4EX |
1 x | Mono-Switch Memory FUTABA |
2 x | Set fresas corte acero-carburo Ø 1.8/2.3 mm (2 pcs) |
1 x | Transmitter JETI Duplex DS-24 EX Carbon Line Dark RED Multimode |
1 x | Steel brush wheel with 2.35mm |
1 x | DSM 10 Dual Switch Mixer |
1 x | Propeller POWER-PROP 14x9 |
1 x | Propeller Pleg CAM Carbon 14x12 |
1 x | Propeller Pleg CAM Carbon 16x13 |
1 x | Propeller Pleg CAM Carbon 12x10 |
1 x | Propeller Pleg CAM Carbon 11x10 |
1 x | Propeller electric carbon 6x5 |
1 x | Propeller CFK 16x17 |
1 x | Propeller CFK 16x16 Wide |
1 x | Propeller CFK 18x17 |
1 x | Actuator Electric 25 mm |
1 x | Pegamento Pu R 50g polyuretano |
1 x | Blades 330mm |
1 x | Propeller Pleg CAM Carbon 13x6.5 |
1 x | Tren retractil ULTIMATUM 1.5 combo ER30 SEt B (ControlBox) |
3 x | Extinguisher CO2 - 2 Kg |
1 x | Propeller Pleg CAM Carbon 12x11 |
1 x | Propeller Pleg CAM Carbon 14x8 |
1 x | Propeller Pleg CAM Carbon 12x5 |
1 x | Propeller Pleg CAM Carbon 11x5 |
1 x | Glider retract undercarriage 8-16 Kg 2.5-3.2(127 mm wheel) |
1 x | Propeller Pleg CAM Carbon 10x8 |
1 x | Propeller Pleg CAM Carbon 10x12 |
1 x | Propeller Pleg CAM Carbon 15x13 |
1 x | Propeller Pleg CAM Carbon 12x9 |
1 x | Propeller Pleg CAM Carbon 11x6 |
1 x | Propeller Pleg CAM Carbon 15x10 |
1 x | Propeller CFK 15x7 |
1 x | RS-200 Touch Programmer |
1 x | Retract/Brake Cable |
1 x | Propeller CFK 14x8 Slim |
2 x | Field folding model stand SebArt |
1 x | Wheel 115 mm with electromagnet and brake disk + E-Brake (2 uds) |
1 x | T-Hose connector 2-2-2 mm |
1 x | Quick hose connector 3-3 mm |
1 x | GPS Sensor + Logger OPTronics |
1 x | Servo Dymond D 37 Eco |
1 x | Spinner 3BL propeller pleg. 65 mm / 4,0 mm |
1 x | Spinner 3BL propeller pleg. 40 mm / 6,0 mm |
1 x | Propeller CFK 12.5x7 |
1 x | Propeller MEJLIK 30x12 |
1 x | Combo lighting module with covering drop shape |
1 x | Propeller MEJLIK 22x10 |
1 x | Propeller Pleg CAM Carbon 15x8 |
1 x | T-Hose connector 6-6-6 mm |
1 x | Landing gear strap small (4 uds) |
1 x | Z-shaped servo mount |
1 x | T-Hose connector 3-3-3 mm |
1 x | Threaded coupler M3 (10 uds) |
1 x | AXI 2814/20 V2 |
1 x | LA500 freewheel bearing |
1 x | Fox MDM 1 4000 mm DeLuxe,wing joiner |
1 x | Servo HITEC D625 MW |
1 x | LA500 Blades |
1 x | LA500 tail empennage |
1 x | NoNa BB wheel Ø175x55mm in pair |
1 x | LA500 cyclic central part |
1 x | Electric rocket starters (6 pcs) |
2 x | Rocket D9-7 |
1 x | Parachutist |
1 x | B4-0 rocket charges (6 pcs) |
1 x | Black smoke bombs AX-60 (5 pcs) |
1 x | Reductora IPS dual-motor 10,7:1 with spinner |
1 x | Propeller 8x4 Electric |
1 x | Red aluminium servo arm V1-Futaba 1,0" inch M2 |
1 x | WingFix ULTRA Black Edition |
1 x | Truck-trailer for gliders 720 x 239 mm |
1 x | Medidor ángulos y/o incidencias |
1 x | Field folding model stand |
1 x | GLOW 2C + accesories |
1 x | Fascination 3600 mm, Spare Wings (Top Model) |
1 x | |
1 x | Hitec 46 mm servo arm with ball link |
1 x | XTorque CFK Servohebel 38 |
1 x | Hitec 38 mm servo arm with ball link |
1 x | Tow hook for tug |
1 x | Servo KST X15-1208 V8.0 13.5Kg HV |
1 x | Servo HITEC HS-70 MG |
1 x | Servo KST HS08A Wing Servo - 5.2Kg.cm 0.11s 11.0g 8mm |
1 x | Spinner propeller pleg. 38 mm / 6,0 mm |
1 x | USB Charger 120-240V AC |
1 x | Digital precision scale up to 2000 g |
1 x | Support hands Issuer PROFI TX |
2 x | Alu servo arm double RHINO |
1 x | Magnetic Interruptor MULTIPLEX |
2 x | |
1 x | DRACO 2.0m BNF |
1 x | PARKMASTER PRO Kit + (RR) |
1 x | Interruptor On/Off Corto micro |
1 x | Adaptador equilibrador HITEC (XH) |
1 x | GPS V2 Sensor for M-LINK receivers |
1 x | 3,0x60 mm allen screwdriver |
1 x | Set fresas corte Vanadium Ø 2.3/2.35 mm (3 pcs) |
1 x | RX TARANIS V8FR-II HV 2.4 GHz |
1 x | Spinner Alumin. propeller pleg. 30 mm / 4,0 mm |
1 x | Gear for D 54 |
1 x | Gear for D 200 BX |
1 x | FIALA Propeller 23x10 |
1 x | Gear for MICRO BB |
1 x | Spinner 3BL propeller pleg. 36 mm / 6,0 mm |
1 x | Spinner propeller pleg. 38 mm / 4,0 mm |
1 x | Spinner propeller pleg. 33 mm / 6,0 mm |
1 x | Spinner propeller pleg. 38 mm / 5 mm |
1 x | PIPER CUB J-3 1/4 2640 mm (TWM) |
1 x | AXI 2212/12 V2 |
1 x | AXI 2212/20 V2 |
1 x | Horn for flap control (1 pcs) |
1 x | NoNa BB wheel Ø130x40mm in pair |
1 x | Electric coversion set |
1 x | Canopy Sweet / Siesta |
2 x | HPP-21 PLUS PC Programmer for Hitec Digital Servos |
1 x | Servo HITEC D950 TW |
1 x | BRASS CONTROL HORN M3x16 mm 2pcs |
1 x | GRE-18 RTR Crawler 1:18 Orange |
1 x | White smoke bombs AX-9 (10 pcs) |
2 x | Me-163 |
2 x | Remote electric ignition system |
1 x | AX-60 starters (5 pcs) |
1 x | Plastic caps for AIR BURTS (30 pcs) |
1 x | Ventral support for AX-18/AX-60 |
1 x | White smoke bombs AX-18 (5 pcs) |
1 x | Propeller 9x7 SlowFlyer |
1 x | Retract undercarriage |
1 x | 11 mm Rubber pads (14 pcs) |
1 x | Cooler motor type 300 |
1 x | Propeller balancer |
1 x | Surface Indicator Gauge Small |
1 x | Truck-trailer for gliders 720 x 285 mm |
1 x | HOPPER tank INTAIRCO iTrap 50 175 ml 3x racor 6mm CLASSIC PRO |
1 x | Futaba 76/92 mm servo pull-pull double arm with ball link |
1 x | Brazo Servo XTorque 52 mm HITEC 25T-6 |
1 x | Futaba 14/20 mm servo pull-pull double arm with ball link |
1 x | Clip fixing for wing (2 pcs) |
1 x | Futaba 25 mm servo arm with ball link |
1 x | Servo KST BLS915 HV V8.0 25Kg 20mm 78g |
1 x | Servo KST X10-710 V8.0 7.5Kg HV |
1 x | Servo Arm aluminium ALU-STAR |
1 x | Spinner propeller pleg. 40 mm / 4,0 mm |
2 x | Extension lead 15 cm Multiplex |
2 x | Wingstabi 9 DR M-Link Receiver |
1 x | Spinner Alumin. propeller pleg. 40 mm / 5,0 mm |
1 x | Antenna MULTIPLEX 2.4 GHz 400mm RX-9/12/16-DR pro |
1 x | Spinner propeller pleg. 32 mm / 6,0 mm |
1 x | Spinner propeller pleg. 30 mm / 3,2 mm |
1 x | DRACO 2.0m PNP |
1 x | Arnes cruzado Confort de Luxe PROFI |
2 x | Aramid fibre shears Proton®, 21 cm / 8" length |
1 x | BULLIT Wing 1095 mm |
1 x | Spinner propeller pleg. 38 mm/6,0 mm/0º |
1 x | HERON RR |
1 x | Transmitter COCKPIT SX 12 M-Link (only Tx) |
1 x | Spinner propeller pleg. 36 mm/6,0 mm/5º |
1 x | Interruptor SAFET-SWITCH 12HV Twinbatt |
1 x | WINGO 2 PNP |
1 x | Spinner propeller pleg. 40 mm / 5,0 mm |
1 x | Spinner propeller pleg. 36 mm/6,0 mm/0º |
1 x | PROFI TX fastening rings |
2 x | Multiplex True Air Speed + Vario Sensor to M-LINK |
1 x | Spinner propeller pleg. 40 mm / 3,0 mm |
1 x | Extra Hard Titanium Herxagon Screwdrivers |
1 x | Spinner Alumin. propeller pleg. 30 mm / 3,2 mm |
2 x | LENTUS Multiplex Fundas alas |
1 x | DRACO 2.0m Helice 14.5x9 4-Blade |
1 x | MULTIPLEX - TUNING SPINNER (67MM) FOR MULTIPLEX FUNRACER |
1 x | Spinner propeller pleg. 32 mm / 5,0 mm |
1 x | 50x45 mm micro-mini servo cover |
1 x | Potenciometro micro |
1 x | Dremel PERMAGRIT 18 mm round lime |
1 x | MPX screwable clips (5 pcs) |
1 x | Teacher-Pupil-cable all FrSky Transmitter |
1 x | TARANIS Q X7 |
1 x | Set brocas Ø 1.5-2.0-2.5-3.0 mm (4 pcs) |
1 x | FUNRAY RR |
1 x | PROXXON - DRILL SET 0,5-3,2MM (10PCS.) |
1 x | Pistola termica MH 550 micro |
1 x | Receiver FrSKY Archer R8pro 2,4 Ghz |
1 x | Transmitter Balancer Futaba FF9-DX7-JR-Hitec |
1 x | HITEC Power Supply 30A. Max. 540w |
1 x | LENTUS RR 3.000mm MULTIPLEX |
1 x | Transmitter Balancer Futaba T-10CG |
1 x | PROXXON - SANDING BELTS FOR BSL 220/E 180 GRIT (5 pcs) |
1 x | Fresa corte diamante Ø 2.35mm (flame) |
2 x | Set brocas Ø 1.2-1.4-1.6-1.8 mm (4 pcs) |
1 x | Powerset FunJet 2 with Vectorcontrol unit |
1 x | Spinner 42 mm EXTRA 330SC |
1 x | Fresa corte diamante Ø 2.7mm (bola) |
1 x | Tachometer HANGAR 9 digital |
1 x | Propeller diller for DLE111 and DA85-150 |
1 x | Propeller diller for DLE30/DLE35RA/DLE40/DLE55/DLE61/EME 55/DA-5 |
1 x | Fabric scissors curved (offset handles), 16 cm / 6" length |
1 x | EC-Cutter |
1 x | Sealing Iron STANDARD |
1 x | 25 mm Sandpaper file |
1 x | Paramotor BackPack XXS (without accessories) |
1 x | Motor ER-120 M3-34mm eje |
1 x | Propeller diller for DA50, DLE55 red |
1 x | Set fresas corte acero-carburo Ø 0.5/1.8 mm (2 pcs) |
1 x | Propeller diller for EME35 and DLE35 |
1 x | Roller cutter 28 mm |
1 x | |
1 x | Laminating brush 10 mm, pack/ 50 pcs |
1 x | Tool for entel |
1 x | Welder 100W/200V |
1 x | 57 mm micro-mini servo cover |
1 x | COPILOT Multiplex |
1 x | Spinner 3BL propeller pleg. 36 mm / 5,0 mm |
1 x | Pump hose (Ø 6/8 mm) transparent |
1 x | Set propellers 5x3 Multicopter (2cw+2ccw) |
1 x | Propeller Pleg CAM Carbon 12.5x6 |
|
98,349.17EUR |