1 x | FESTO connector 1/8 Quick 6mm 90º |
1 x | Propeller diller for DA50, DLE55 red |
1 x | Piston ring for ZG 20 and G240RC |
1 x | M2,5 Diam metal ball link V3 (2 pcs) |
1 x | 68 mm PVC transparent battery termo-retract 68 mm (1 m) |
1 x | ORACOVER Ferrari red (2 m) |
2 x | Flat washer 3.2 mm (20 pcs) |
2 x | 6 mm aluminium horn with patella |
1 x | Glider retract undercarriage 8-16 Kg 2.5-3.2(127 mm wheel) |
1 x | Round Rod 2,5x1000 mm |
1 x | ABS Strip 1.0x5.0x1000 mm |
1 x | Glider retract undercarriage 8-16 Kg 2.5-3.2(without wheel) 140m |
1 x | Fail Safe air retract |
1 x | Landing gear strap small (4 uds) |
1 x | Retract undercarriage for gliders up to 3,5 Kg |
1 x | Brass control horn M2 short for wire (2 pcs) |
1 x | Aluminun wheel collar 6 mm Ø (4 uds) |
1 x | Spring lock washer 2.6 mm (20 pcs) |
1 x | Short ball link M2 (6 uds) |
1 x | Body for landing gear Ø 4 mm |
1 x | Aluminium cap bolt washer M3 green (8 pcs) |
1 x | M2/M1/6 3Diam short black ball link V1 (2 pcs) |
1 x | Quick hose connector 3-3 mm |
1 x | Strip ABS 2.0x5.0x1000 mm |
1 x | Monokote ROJO misil (1.8x0.65m) |
1 x | Horn 5/10 with M2 Bearing |
1 x | Brass control horn M4 short for wire (4 pcs) |
2 x | Horn 20x28,5 mm (2 pcs) |
1 x | Joint with bearing M2 22x5,5 |
1 x | 2,4x1000 mm 2:1 green termoretract tube |
1 x | Civilian pilot "G-Man" size 9cm (Slimline) |
3 x | 1/12 Pilot "Fighter" |
1 x | Hose stopper 4 mm |
1 x | Round Rod 1,25x1000 mm |
1 x | 6,4x1000 mm 2:1 green termoretract tube |
1 x | Aluminium wide washer M4 Gold (4 pcs) |
2 x | Horn 16,5x20 mm (2 pcs) |
1 x | Fiberglass heat shield Ø 4 mm 1000 mm |
2 x | Sun Cover PC 21 XXL (JMB Jets) |
3 x | Nylon threaded block M6 (2 uds) |
1 x | 5 mm M2 variable horn |
1 x | ABS I Strip 10x5x1000 mm |
1 x | 6 mm red aluminium threaded horn with patella |
1 x | 1/6 Pilot "Buddy" |
2 x | Horn mando long (2 pcs) |
2 x | Nylon gear block Ø 3 mm (2 uds) |
2 x | Round Rod 5,0x1000 mm |
1 x | 40 mm air cylinder |
1 x | M2/M1/6 3Diam long black ball link V1 (2 pcs) |
2 x | Aluminium cap bolt washer M4 blue (8 pcs) |
1 x | Cable set PREMIUM, SUB-Done 4three fuselage/wing 160 cm |
1 x | 135 mm PVC transparent battery termo-retract 68 mm (1 m) |
1 x | 10 mm Quick clamp_L (6 pcs) |
1 x | Pilot JAN 1/4 Saiplanes |
1 x | Landing gear clamp for Ø 4 mm (4 uds) |
1 x | Protective Cover for wires Ø 6 mm 1000 mm |
1 x | 6 mm M3 variable inclined horn |
1 x | Pilot WWII US Navy Pacific 12" Scale 1/6-1/5 |
1 x | Spring lock washer 4.1 mm (20 pcs) |
2 x | Polyurethan FESTO hose 3x0,5 mm, transparent |
1 x | Aluminium cap bolt washer M3 black (8 pcs) |
1 x | 58 mm PVC transparent battery termo-retract 68 mm (1 m) |
1 x | Aluminium wide washer M4 Black (4 pcs) |
2 x | 2,5x60 mm allen screwdriver |
1 x | Balsa panel 10x100x1000 mm |
1 x | Ball Link Plier |
1 x | Cable grommet Ø 5 mm (4 uds) |
1 x | Conector XT-150 6mm (Set: 5 pares) |
1 x | Extension S-Bus 1-2 silicon 120 cm FUTABA |
1 x | Fast'n EZ-CA-Hinge, lite (12 uds) |
1 x | Nylon hinge for flaps/gates 27x10,5 (2 pcs) |
1 x | Extension silicon 10 cm (Graupner) |
1 x | Conector FUTABA Servo female (10 pcs) |
1 x | BALSA trip 2.0x2.0x1000 mm |
1 x | Bag connector 2 mm |
1 x | Pin hinge 26x11 mm (10 uds) |
1 x | 1,5x50 mm allen screwdriver |
1 x | Canopy Lock V1 M3 Red (2 pcs) |
2 x | Aluminun wheel collar 4 mm Ø (4 uds) |
1 x | Extension silicon 35 cm male (Futaba) |
1 x | BALSA trip 8.0x8.0x1000 mm |
1 x | Digital weight, angle and balance meter BASIC |
2 x | Fresa corte diamante Ø 1.4mm (bola) |
1 x | 100 mm rods + T patellas set for direction control |
1 x | 0,14 mm PVC servo wire extension, ZH micro conector. |
1 x | Cylidric hinge 43 mm Ø 2,5 mm (5 pcs) |
1 x | A/C economy plywood 600x300x6+.0 mm |
1 x | Boxed KIT OF 7 Rotary Burrs FINE |
1 x | EC-Cutter |
1 x | Aluminun wheel collar 5 mm Ø (4 uds) |
1 x | UMX™ Whipit™ DLG BNF Basic (E-flite) |
1 x | Surprise XII Horizontal Estabilizer (Freudenthaler) |
2 x | X-RAY Micro QR (Elevator) |
1 x | Glider PIROL |
1 x | E-FUN BUG (ROI-Import) |
2 x | X-RAY Micro QR |
2 x | Glidder Mü13e (Bergfalke) |
1 x | 1000 ccm gasoline fuel tank |
1 x | Aluminun wheel collar 2 mm Ø (4 uds) |
1 x | PVC transparent battery termo-retract 51 mm (1 m) |
1 x | Silicone red 1,0 qmm wire ( 1 m) |
1 x | Aero shocks |
1 x | Silicone red 1,5 qmm wire ( 1 m) |
1 x | Ply-Span 450x600/13g White |
1 x | Black silicone 0,25 mm² wire (25 m) |
1 x | PVC termo-retract battery 45 mm black transparent (1 m) |
1 x | XH 30 cm Female extension 0,25 mm2 silicone cable for 3 cell |
1 x | Ply-Span 450x600/13g Yellow |
1 x | Silicone red 0,75 qmm wire ( 1 m) |
2 x | Aluminun wheel collar 3 mm Ø (4 uds) |
1 x | SIG Coverall 1.2x4.5 m |
1 x | Racor 4/6 mm |
1 x | PVC 0,14 qmm servo wire Futaba (5 m) |
2 x | Wheel collar 5 mm Ø (4 uds) |
1 x | PVC transparent battery termo-retract 195 mm (1 m) |
1 x | Oratex Silver 2m |
1 x | 1/4 Pilot "Mike" |
1 x | Threaded coupler ALU M2,5 Ø 3 (2 uds) |
1 x | Threaded coupler ALU Left M3 Ø 4 (2 uds) |
1 x | 12 mm floating pad (49 pcs) |
1 x | Set Threaded coupler ALU M2,5 Ø 4 (2 uds) |
2 x | Socket Head Screw M2x10 |
1 x | Long horn 50x26 |
1 x | 10 mm Prop Adapter M12 |
1 x | Horn with ball 55x40 |
1 x | 100m servo "Premium" wire (white/red/blue) |
2 x | Cabel PVC 2 x 0.25 mm2 (5 m) red-black |
1 x | Quicklock washer 2 mm (10 pcs) |
1 x | Circlik for shaft 1.9 mm (10 pcs) |
1 x | Ball link M1.6 (6 uds) |
1 x | Landing gear axle Ø 8 mm (2 uds) |
1 x | Lock washer 3.2 mm (20 pcs) |
1 x | Quicklock washer 3.5 mm (10 pcs) |
1 x | Short ball link M3 (6 uds) |
1 x | Round Rod 1,0x1000 mm |
1 x | Pilot "Dick" Legends Series (Slimline) |
1 x | Piloto RC Civil 1/5- 1/6 Scale 12" |
1 x | M2 5Diam black ball link V2 (2 pcs) |
1 x | Round Rod 2,0x1000 mm |
1 x | Vasa model Catapult |
1 x | M2,5 Diam metal short ball link V3 (2 pcs) |
1 x | Precision wrench L100 mm |
1 x | Fresa corte diamante Ø 1.0mm (bola) |
1 x | 3,0x60 mm allen screwdriver |
1 x | DUPLEX 2.4EX Central Box 320 + 2x Rsat2 + RC Switch |
1 x | DUPLEX 2.4EX Central Box 220 |
1 x | DUPLEX 2.4EX Central Box 220 + 2x Rsat2 |
1 x | 11 mm Rubber pads (14 pcs) |
1 x | servo adapter lead, JST-SH socket - JR male Pin, for GR-12SH+HoT |
1 x | Premium servo extension 100cm |
1 x | Clip fixing for wing (2 pcs) |
1 x | Aluminun wheel collar 2.5 mm Ø (4 uds) |
1 x | Extension silicon 100 cm (Futaba) |
1 x | BALSA trip 6.0x6.0x1000 mm |
1 x | Protective Cover for wires Ø 3 mm 1000 mm |
1 x | Nylon threaded block M5 (2 uds) |
1 x | PVC blue transparent battery termo-retract 68 mm (10 m) |
1 x | PVC 0,35 qmm servos wire Graupner (100 m) |
1 x | 50m servo "Premium" wire (white/red/blue) |
1 x | Silicone black 1,5 qmm wire ( 1 m) |
1 x | Angled clevis with threaded rod M3 |
2 x | Control horn long w/ball |
1 x | SlowFlyer control horn (3 pcs) |
1 x | Pilot "Adolf" Legends Series (Slimline) |
2 x | Horn 13,5x16 mm (2 pcs) |
1 x | 5 mm Prop Adapter M8 |
1 x | Screw M3x5 (10 pcs) |
1 x | Landing gear axle Ø 5 mm (2 uds) |
1 x | Horn 6/20 with M3 Bearing |
1 x | Servo M2x5/16 screw (4 pcs) |
1 x | Extra long horn 60x30 |
1 x | Titanium M3x0,5x8 mm Flat Head screw (4 pcs) |
1 x | Civilian pilot "Pamela" size 9cm (Slimline) |
1 x | Civilian pilot "Gramps" size 9cm (Slimline) |
1 x | Treaded hexagonal socket insert M3 Br (4 pcs) |
1 x | 6 mm Prop Adapter M8 |
1 x | 1/10 Pilot "Jack" |
1 x | Horn DUBRO 1/2A |
1 x | 5 mm Prop Adapter M8 |
1 x | Screw M2.5x5 (10 pcs) |
1 x | Horn micro type4 Ø 0,5 (2 pcs) |
1 x | 1/6 Pilot "Garry" |
1 x | Threaded coupler ALU Left M2,5 Ø 4 (2 uds) |
1 x | Air pressure gauge |
1 x | 1/10 Pilot "Jimmy" |
1 x | Socket Head Screw M2x5 |
1 x | 1/6 Pilot "Tony" |
1 x | Horn 6/27 with M3 Bearing |
1 x | Screw M3x12 (10 pcs) |
1 x | 5 mm Prop Adapter CN-Spinner |
1 x | Adjustable brass horn threaded M3 |
1 x | Tapping Screw M2.9x13 (10 pcs) |
1 x | 3.17 mm Prop Adapter CN-Spinner |
1 x | 3.2 mm Prop Adapter M8 |
1 x | Floating M4 washer pad (36 pcs) |
1 x | Spring pin Ø 2 x 6 mm (10 pcs) |
1 x | Tapping Screw M2.2x9.5 (10 pcs) |
1 x | Screw M3x8(10 pcs) |
1 x | Prop Shaft Adapter 5 mm/M8 "long" |
1 x | Faucet FESTO |
1 x | Pan Head Screw M1,6x6 (10 pcs) |
1 x | Piloto jet 130 mm |
1 x | Flat washer 4.3 mm (20 pcs) |
1 x | Landing gear axle 4x21 4 mm (2 uds) |
1 x | Blue metalic ball link M3/3 azul (2 pcs) |
1 x | ABS Strip 1.5x4.0x1000 mm |
1 x | Aluminium cap bolt washer M3 blue (8 pcs) |
1 x | Socket head ball link M3 (2 uds) |
1 x | Ball link M3 (6 uds) |
1 x | 1/12 Pilot "Tom" |
1 x | Pilot "Goose" (Slimline) |
1 x | Aluminium wide washer M3 gold (4 pcs) |
1 x | Strip 2,5x1,25x330 mm |
1 x | STEERING FRONT WHEEL SYSTEM BIDULE 111 |
1 x | STEERING FRONT WHEEL SYSTEM BIDULE 55 |
1 x | Aluminun wheel collar 3.5 mm Ø (4 uds) |
1 x | Sealing Iron Sleeve STD |
1 x | 28x5 mm wires output (2 pcs) |
1 x | Soldering tip for KAVAN soldering iron KAV66.8338 |
1 x | Allen wheel collar M4x4 |
1 x | Pushrod greyline 4/3 with coupler M3 |
1 x | Schul-Malpinsel Gr.5 |
1 x | Pushrod greyline 3/2 with coupler M2 L: 1000 mm |
1 x | Landing gear frontal support 25x32x16 |
1 x | PC-21 2.880 mm (w/o oracover) |
1 x | BD-5J ARF+ |
1 x | Adjustable launching hook |
1 x | Wheel collar 2 mm Ø (4 uds) |
1 x | DUPLEX 2.4EX Central Box 220 + 2x Rsat2 + RC Switch |
1 x | DUPLEX 2.4EX Central Box 210 |
1 x | Wing conexion 2 servos Futaba 50 cm |
1 x | BALSA triangular 10x10x1000 mm |
1 x | Prolongador S-Bus JR/JR 20cm |
1 x | LED wire (rojo - 2pcs) |
1 x | Cable grommet Ø 6.4 mm (4 uds) |
1 x | Cierre cabina aluminio Ø4, I=10 mm |
1 x | Xplorer1 anemometro |
1 x | Extension silicon 10 cm (Futaba) |
1 x | Cabin latch Fox MDM1 4m (pair) |
1 x | 80 mm rods set for direction control |
1 x | Extension 30 cm (Futaba) |
1 x | Mounting frame MPX female connector |
1 x | BALSA trip 5.0x5.0x1000 mm |
1 x | XH LiPo extension lead |
1 x | Extension silicon 30 cm male (Graupner) |
1 x | Premium servo extension 25cm |
1 x | Extension silicon 30 cm female (Futaba) |
1 x | Aluminium alloy coupler for carbon tube 6/M4 |
1 x | Cable grommet Ø 3.2 mm (4 uds) |
1 x | Balsa panel 3.0x100x1000 mm |
1 x | Camera Sony 4140+673 CCD with Built-in 200mw TX + antenna |
1 x | BABY glider (Aero-naut) |
1 x | FELIX JR Yellow/Black 1750 mm |
1 x | PC-21 2880 mm Spinner 5Blade red |
1 x | MB339 CANADA PNP 1790 mm |
1 x | PC-21 XXL 3.395 mm |
1 x | 34 mm Alu spinner 3.17 mm pleg. propeller |
1 x | 65 mm mini servo cover |
1 x | Balsa panel 8.0x100x1000 mm |
1 x | MPX PCB "4 Pins", 5 pieces |
1 x | Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH |
1 x | Silicone 0,25 qmm servos wire Graupner (100 m) |
1 x | Cable Cargador FUTABA |
1 x | Silicone 0,50 qmm servos wire Futaba (100 m) |
1 x | Silicone 0,25 qmm servos wire Graupner (5 m) |
1 x | Silicone 0,14 qmm servos wire Graupner (5 m) |
1 x | Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH |
1 x | 4 LiPo XH>EH adapter |
1 x | Silicone 0,35 qmm servos cable Futaba (5 m) |
1 x | JR silicone servo wire 0,35 qmm / 5m |
1 x | Black copper lacquer wire Ø0,2 mm (5 m) |
1 x | Copper lacquer wire Ø0,2 mm (5 m) |
1 x | Silicone 0,14 qmm servos wire Graupner (100 m) |
1 x | 3 LiPo XH>EH adapter |
|
20,652.19EUR |