2 x | Wing-connector: Glass / Carbon tube (26.5/25 x 25/23) x 1000 mm |
1 x | Ply-Span 450x600/13g Yellow |
1 x | Brass rod Ø 1.0 mm x 1000 mm |
2 x | Yellow smoke canister 65 g |
1 x | Carbon fiber rod 0.5 mmx1000 mm |
2 x | White smoke bombs AX-60 (5 pcs) |
1 x | Walnut wood slat 3.0x3.0x1000 mm |
1 x | Carbon fiber rod 4.0 mmx1000 mm |
3 x | Straightened rod Ø 0.5 mm x 1000 mm |
4 x | Red copper lacquer wire Ø0,2 mm (5 m) |
1 x | Carbon fiber flat 1000x3.0x0.13 mm |
2 x | Straightened rod Ø 1.0 mm x 1000 mm |
2 x | CC 01 |
2 x | Straightened rod Ø 0.8 mm x 1000 mm |
1 x | Walnut wood slat 1.5x1.5x1000 mm |
2 x | CC 05 |
1 x | Carbon fiber rod 20 mmx1000 mm |
1 x | Parachute expulsion foam |
1 x | Oracover White 10 m |
1 x | Pine wood slat 1.5x3.0x1000 mm |
3 x | Threaded coupler ALU M3 Ø 4 (2 uds) |
4 x | CC 02 |
2 x | SUS wire 3m (nylon coated) |
2 x | Stainless steel cable Ø 0.52 mm - 15 kp (10 m) |
1 x | Horn 5/20 with M2 Bearing |
1 x | Pine wood slat 6.0x6.0x1000 mm |
2 x | Straightened rod Ø 5.5 mm x 1000 mm |
1 x | Pine wood slat 2.0x2.0x1000 mm |
1 x | Horn 5/15 with M2 Bearing |
1 x | Oracover Verde 2 m |
1 x | Green smoke canister 140 g |
3 x | Straightened rod Ø 7.0 mm x 1000 mm |
3 x | Steering arm 12 mm Ø 3 mm (2 uds) |
5 x | Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH |
2 x | ABS I Strip 10x5x1000 mm |
3 x | Steering arm 16 mm Ø 4 mm (2 uds) |
1 x | Carbon fiber rod 0.5 mmx1000 mm |
2 x | SlowFlyer control horn (3 pcs) |
1 x | Red smoke canister 65 g |
2 x | Horn 6/20 with M3 Bearing |
2 x | TrainerCord (master-learner) |
2 x | Horn 16,5x20 mm (2 pcs) |
1 x | Initior Transmitter FTX2 Wireless |
4 x | Threaded coupler ALU M2,5 Ø 4 (2 uds) |
1 x | Pine wood slat 5.0x5.0x1000 mm |
1 x | OBECHI sheet 2.0x3.0x1000 mm |
1 x | Ball Link M2 with Ball and Hardware, 10 pcs |
1 x | Carbon fabric 160 g/m² (twill weave) 127 cm, roll/ 10 m |
1 x | Ball link Aluminio M3 x 3 x 5 x 18mm (6 uds) |
1 x | Threaded coupler M2 (10 uds) |
1 x | Ball link Aluminio M3 (2 pcs) |
1 x | Support Pitot JETI |
2 x | Carbon fibre tape 200 g/m² (unidirectional) 50 mm |
1 x | 6 mm hexagonal ball link M3 (10 pcs) |
1 x | M2/M1/6 3Diam short black ball link V1 (2 pcs) |
1 x | M3 Maxi ball link (2 uds) |
1 x | Short ball link M1.6 (6 uds) |
1 x | M2/M1/6 3Diam long black ball link V1 (6 pcs) |
1 x | Socket head long ball link M3 (2 uds) |
2 x | Ball link M3 (6 uds) |
1 x | M2,5 5Diam metal ball link V3 (2 pcs) |
2 x | Short ball link M3 (6 uds) |
1 x | M2,5 5Diam black ball link V2 (2 pcs) |
1 x | Joint with bearing M3 22x5,5 |
1 x | Ball link M2,5 (10 pcs) |
1 x | TMM 2512-3S heli |
1 x | Tubo espiral FESTO 6x1 Black |
1 x | SERVO HOLDER |
1 x | Turbina KINGTECH K320 G5 |
1 x | Epoxy adhesivo Elan-tech ADH 981.892 50ml (dark grey) |
1 x | Servo mounting frame SV-1260MG |
1 x | Propeller balancer |
1 x | LOWER TOW HOOK |
2 x | AX-60 starters (5 pcs) |
1 x | Black smoke bombs AX-60 (5 pcs) |
1 x | Yellow smoke canister 100 g |
1 x | SERVO DES 588 BB MG |
1 x | Green smoke canister 65 g |
4 x | Battery charging cable XT60 |
3 x | Crimping sleeves for cable 0.85 mm (10 pcs) |
1 x | Allen wheel collar M3x5 |
4 x | Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm) |
1 x | Snap for floding prop for 2 mm axi |
1 x | CM-3 |
2 x | Snap pin for micro clevis (10 uds) |
2 x | Strip ABS 2.0x3.0x1000 mm |
2 x | 41x5,5 mm wires output (2 pcs) |
4 x | Steering arm 12 mm Ø 4 mm (2 uds) |
1 x | ABS Strip 1.5x6.0x1000 mm |
1 x | Connector Sub-D 2+5 Male |
3 x | 4 LiPo XH>EH adapter |
1 x | Stainless steel cable Ø 0.88 mm - 60 kp (10 m) |
2 x | Horn 6/35 with M3 Bearing |
2 x | Threaded coupler ALU M2 Ø 4 (2 uds) |
2 x | Threaded coupler ALU M2 Ø 3 (2 uds) |
4 x | Dean "T" - Futaba Adapter |
2 x | Cierre cabina aluminio Ø5, I=16 mm |
2 x | Horn with ball 55x40 |
1 x | Straightened rod Ø 14.0 mm x 1000 mm |
3 x | 2 LiPo XH>EH adapter |
4 x | Copper lacquer wire Ø0,2 mm (5 m) |
1 x | Micro control horn T2 Ø 1 |
2 x | Screw-lock connector Ø 2 mm (2 uds) |
2 x | Sun Cover BULL Mo1 2.6 (Hispano Aviacion) |
3 x | 3.17 mm Prop Adapter CN-Spinner |
2 x | Aluminium rod Ø 4.0 mm x 3000 mm |
2 x | Electric spoiler 250 mm (2 pcs) |
3 x | 3,2 mm Prop Adapter M8 |
1 x | Smoke set "Glider" |
1 x | SERVO DES 707 BB MG |
1 x | F-16 Scale 1/6 G3 Airex Deco: AF 916F |
1 x | Yellow smoke bombs AX-60 (5 pcs) |
3 x | Bec MR UBEC 5A (5v/6v/7v) |
3 x | 5 LiPo XH>EH adapter |
2 x | Locking cable tie 2.5x100 (uds) |
3 x | Cockpit plastic closing |
3 x | CC 03 |
1 x | ABS Strip 1.0x4.0x1000 mm |
1 x | Strip 1,5x1,5x330 mm |
3 x | Steering arm 16 mm Ø 3 mm (2 uds) |
3 x | Cable grommet Ø 3.2 mm (4 uds) |
1 x | ABS Strip 1.5x8.0x1000 mm |
4 x | 3 copper lacquer wire Ø0,2 mm (1 m) |
5 x | Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH |
1 x | Connector Sub-D 2+5 Female |
5 x | 30 cm BEC cable (male) |
1 x | Round Rod 1,0x1000 mm |
2 x | BEC 3A FOXY |
1 x | Split pin 1.6x16 mm (10 uds) |
3 x | Balanceradapter JST-XH (Heli 47G) 2-6 c. |
1 x | Split M1,2x10 (10 pcs) |
2 x | Strip ABS 2.0x10.0x1000 mm |
2 x | Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH |
2 x | Strip 3,5x1,75x330 mm |
2 x | Round Rod 4,0x1000 mm |
2 x | Cable grommet 9.5 mm (4 uds) |
2 x | 38x4,5 mm wires output (2 pcs) |
1 x | DPS Switch JR/JR |
3 x | Lead with adhesive (2 pcs) |
3 x | Canopy Latch |
2 x | Round Rod 5,0x1000 mm |
2 x | Micro screw-lock pushrod conn snap Ø 1 mm (2 uds) |
1 x | DPSI Ampere battery backer |
2 x | Round Rod 6,0x1000 mm |
2 x | Strip 2,5x1,25x330 mm |
1 x | Control for forward wheel (MINI) |
1 x | Strip 2,0x2,0x330 mm |
1 x | Split pin 1x8 mm (10 uds) |
2 x | Connector CAN 15 |
3 x | 28x5 mm wires output (2 pcs) |
2 x | ABS Strip 1.5x4.0x1000 mm |
2 x | Tip wing protector 40x14 (2 pcs) |
3 x | Steering arm 16 mm Ø 3 mm |
1 x | Cable set PREMIUM, SUB-Done 4three fuselage/wing 160 cm |
2 x | Black copper lacquer wire Ø0,2 mm (5 m) |
2 x | Landing gear frontal support 29x26x13,5 |
1 x | Tip wing protector 30x10 (2 pcs) |
2 x | Tip wing protector 28x10x12 (2 pcs) |
2 x | ABS Strip 1.0x3.0x1000 mm |
2 x | Allen wheel collar M4x4 |
2 x | Cable grommet Ø 6.4 mm (4 uds) |
1 x | Round Rod 2,5x1000 mm |
2 x | Round Rod 1,25x1000 mm |
5 x | 3 LiPo XH>EH adapter |
1 x | Cable grommet Ø 4 mm (4 uds) |
3 x | Steering arm 12 mm Ø 4 mm |
1 x | ABS I Strip 20x10x1000 mm |
3 x | Allen wheel collar M4x6 |
1 x | Double conector with JR adapter and 200 mm extension |
4 x | Adapter lead MPX/XT60 |
3 x | Cable grommet Ø 5 mm (4 uds) |
1 x | ABS Strip 1.5x2.0x1000 mm |
1 x | 6 mm aluminium horn with patella |
2 x | One touch canopy lock |
3 x | Horn micro type4 Ø 0,5 (2 pcs) |
2 x | Horn for flap control (1 pcs) |
1 x | Brass hexagonal rod Ø 5 mm x 1000 mm |
1 x | Cable control set |
2 x | Small aluminium horn red (2pcs) |
1 x | Cable with accesories |
3 x | 3 mm Prop Adapter M6 |
2 x | Straightened rod Ø 8.0 mm x 1000 mm |
1 x | 4 mm Prop Adapter M6 |
1 x | Straightened threaded rod M2-1m |
2 x | JetiBOX |
1 x | 6 mm red aluminium threaded horn with patella |
3 x | 2,3 mm Prop Adapter M6 |
1 x | Straightened rod Ø 6.0 mm x 1000 mm |
2 x | Brass control horn M2 large for wire (2pcs) |
1 x | Brass rod Ø 0.8 mm x 1000 mm |
3 x | 4 mm Prop Adapter M8 |
2 x | OPUS-V / Jet-CC-BF |
1 x | Long horn 50x26 |
1 x | Small aluminium horn blue (2pcs) |
2 x | Horn with ball 40x30 |
2 x | Horn 13,5x16 mm (2 pcs) |
2 x | Threaded coupler ALU M3 Ø 5 (2 uds) |
1 x | Brass control horn M2 short for wire (2 pcs) |
2 x | ProgBOX MASTER Hacker |
2 x | Horn 6/27 with M3 Bearing |
1 x | Horn 20x28,5 mm (2 pcs) |
1 x | Brass rod Ø 1.5 mm x 1000 mm |
1 x | Straightened threaded rod M3 - 1m |
2 x | RH long aluminium horn (2pcs) |
2 x | Threaded coupler ALU M3 Ø 6 (2 uds) |
3 x | 10 mm Prop Adapter M12 |
3 x | Short adjustable control horn 3x24 |
2 x | 30 cm BEC cable (female) |
1 x | Brass control horn M4 short for wire (4 pcs) |
2 x | Ring support P-20 OPUS V-Jet 60mm |
3 x | Screw-lock pushrod conn snap Ø 1.5 mm (2 uds) |
1 x | Brass hexagonal rod Ø 3.5 mm x 1000 mm |
1 x | USB HLS prog. interface |
2 x | Brass control horn M3 short for wire (2 pcs) |
3 x | 3,2 mm Prop Adapter M6 |
2 x | Stainless steel cable Ø 1.3 mm (10 m) |
3 x | 6 mm Prop Adapter M8 |
1 x | LH long black aluminium horn L31xH30 (2pcs) |
1 x | 2,3 mm Prop Adapter M6 |
3 x | MPX-Dean "T" Adapter |
2 x | Long adjustable control horn 3x34 |
3 x | 4 mm Prop Adapter M8 |
3 x | Threaded coupler ALU Left M2,5 Ø 3 (2 uds) |
2 x | Threaded coupler ALU M2,5 Ø 3 (2 uds) |
4 x | Locking cable tie 4.6x203 (uds) |
2 x | Circlick securite |
1 x | Threaded coupler ALU Left M2,5 Ø 4 (2 uds) |
3 x | VIPER JET 2.2m + Electric landig Gear Deco: 01 Red-Blac-kWhit |
1 x | Straightened rod Ø 4.0 mm x 1000 mm |
1 x | Small aluminium horn gold (2pcs) |
2 x | Horn 5/10 with M2 Bearing |
1 x | DUPLEX USBa USB-Adapter for Jeti Duplex Items |
1 x | Extra long horn 60x30 |
1 x | Kontronik ProgUnit |
3 x | Micro control horn (2 pcs) |
4 x | Cierre cabina aluminio Ø4, I=10 mm |
2 x | Straightened rod Ø 1.5 mm x 1000 mm |
1 x | Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm) |
3 x | 3 mm Prop Adapter M6 |
1 x | Brass control horn M4 short for wire (10pcs) |
3 x | Vertical cockpit anchor "tipe F3A" (2 pcs) |
2 x | APM2.6 Power module with 5.3V DC BEC |
3 x | Futaba External voltage input cable Futaba CA-RVIN-700 |
4 x | Steering arm 16 mm Ø 4 mm |
2 x | Cabin latch Fox MDM1 4m (pair) |
2 x | Stainless steel cable Ø 0.5 mm (20 m) |
1 x | CellPRO 4S Adaptader (GP/KO up to 4S) |
2 x | DYMOND VTX UBS Programming adapter |
3 x | "Y" charging 4mm wire (2 IN-1 OUT). |
2 x | Crimping sleeves for cable 0.70 mm (10 pcs) |
2 x | Tank GFK Opus/JEt 300 ml |
1 x | Brass hexagonal rod Ø 4 mm x 1000 mm |
3 x | 5 mm Prop Adapter M6 |
1 x | TP/TopFuel - JST-EH 4/5S Adapter |
2 x | Covered closure or fairings |
1 x | Straightened rod Ø 1.2 mm x 1500 mm |
1 x | PROFI Box JETI |
1 x | Cabel charger transmitter GRAUPNER |
2 x | Hacker X-Pro USB interface V2 |
2 x | Threaded coupler ALU Left M3 Ø 4 (2 uds) |
1 x | Horn DUBRO 1/2A |
1 x | Straightened rod Ø 3.0 mm x 1000 mm |
1 x | 20 mm carbon horn |
2 x | Adapter lead MPX/EC3 |
2 x | Ferrita 14x8x5.5 mm |
2 x | Ferrita 27x14x7 mm |
2 x | Ferrita con funda |
1 x | NF-3 RC set |
1 x | Ball link M1.6 (6 uds) |
1 x | M3 Maxi ball link (2 uds) |
1 x | M2,5 Diam metal ball link V3 (2 pcs) |
1 x | NF-1 RC set |
1 x | 460 mm EPP Floats |
1 x | Ventus 1:4 set of instruments |
1 x | Ball link M3 RPA's-UAV's |
1 x | Ball link M2 (10 pcs) |
1 x | Propeller APC 11x10 Electric |
1 x | Propeller APC 12x10 Electric |
1 x | 48 mm cylidric hinge Ø 2,5 mm (5 pcs) |
1 x | Gates hinge 30x16 mm (2 pcs) |
1 x | Long pinned hinge (6 uds) |
1 x | Pin hinge 26x11 mm (10 uds) |
1 x | Swing 1000 |
2 x | Savox Highvoltage Brushless Servo SB-2272MG (Tail rotor) |
1 x | Tow hook for tug |
2 x | 58 mm micro servo cover |
1 x | Servo SAVOX SA-1258 TG |
1 x | Crystal Universal TX 35.140 Ch 74 |
1 x | IPACS Aerofly Professional Expansion Pack Vol. 1 PC-DVD |
1 x | 90x75 mm standart servo cover |
1 x | Servo SAVOX SH 0257 MG |
1 x | Servo SAVOX SV-1261 MG |
1 x | Servo SAVOX SV-1260 MG |
1 x | 18 mm wing servo holder |
1 x | 65 mm mini servo cover |
1 x | SAVOX SH 0255 MG servo |
1 x | Propeller APC 13x4 Electric |
1 x | Propeller APC 10x7 SF |
1 x | Propeller APC 10x4.7 SF Pusher |
1 x | Propeller APC 11x5.5 Electric |
1 x | Propeller APC 11x3.8 SF |
1 x | Propeller APC 10x4.7 |
1 x | Propeller APC 10x4.7 SF |
1 x | Propeller APC 10x6 Electric |
1 x | 25 mm reinforced hinge |
1 x | Gates hinge aluminium (1 pcs) |
1 x | 76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs) |
1 x | Sandwich carbon + poplar 4mm + carbon 480x290 mm |
1 x | Charger Li Polymer Multi-Cell Multi-Rate Charger (MCMR) |
1 x | EasyFLY Addon |
2 x | Servo NARO Max Std |
1 x | Crystal Universal RX 35.020 Ch 62 |
1 x | GameCommander USB Universal |
1 x | Micro Crystal RX 35.120 Ch 72 |
1 x | Micro Crystal RX 35.010 Ch 61 |
1 x | PPS-4D Propeller |
1 x | Slave-cable USB Easy Sim |
1 x | Indoor Brushed motor kit |
1 x | Crystal Universal RX 35.130 Ch 73 |
1 x | Crystal Universal RX 35.120 Ch 72 |
1 x | Piñones SAVOX SH-0350 |
1 x | Servo SAVOX SV-1270 TG |
1 x | Servo TOPMODEL STANDARD S3217 |
1 x | Servo SAVOX SB-2290 SG |
1 x | 13 mm wing servo holder |
1 x | Servo SAVOX SV-1254 MG HiVolt Low Profile |
1 x | Servo TOPMODEL DS1413 T |
1 x | Servo SAVOX SA-128S SG |
1 x | Servo SAVOX SV-1273 TG |
1 x | 90x60 mm standart servo cover |
1 x | Servoarm Aluminium SH-82 |
1 x | 50x45 mm micro-mini servo cover |
1 x | SAVOX SH 1250 MG servo digi |
1 x | Servo SAVOX SV-0236 MG HV |
1 x | Savox Brushless Servo SC-1267 SG |
1 x | Charger 220/110v |
1 x | Extension 2/3 lipos JST - JST/C |
2 x | 11 mm Rubber pads (14 pcs) |
3 x | 5 mm Prop Adapter CN-Spinner |
3 x | 140 mm rods + T patellas set for direction control |
1 x | Extension 5 lipos JST - JST/C |
1 x | 100 mm rods + T patellas set for direction control |
1 x | Male prolonguer XH 30 cm 6 cell cable of silicone 0,25 mm |
3 x | Long adjustable aluminium control horn with bearing 2,8x15 |
1 x | SPS Remote switch actuator |
2 x | Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm) |
2 x | Prop Shaft Adapter 5 mm "long" |
2 x | Clip mini fixing for wing (2 pcs) |
1 x | L cockpit anchor "tipe F3A" (2 pcs) |
1 x | Rocket cardboard tube 50mm x 48mm x 250mm |
1 x | 3-blades 20x10 carbon prop Super Silence |
1 x | 22x10 prop Super Silence |
1 x | SBEC 40 |
1 x | 800TVL CMOS camera for FPV |
2 x | 5 mm Prop Adapter M8 |
1 x | Press fitting for 1,0 diam. steel cable (10 pcs) |
3 x | Brass control horn M4 long for wire (4 pcs) |
1 x | Strip ABS 2.0x8.0x1000 mm |
1 x | Straightened rod Ø 2.0 mm x 1000 mm |
2 x | Rudder forward 70x28 "type Kato" |
1 x | White silicone 0,25 qmm wire (150 m) |
1 x | 4 mm Prop Adapter CN-Spinner |
2 x | Pushrod greyline 4/3 with coupler M3 |
1 x | PVC 0,08 qmm Futaba servos wire (5 m) |
2 x | 6 mm Prop Adapter M8 |
1 x | PVC 0,35 qmm servos wire Graupner (100 m) |
2 x | ARAMID honeycomb 1300x2600x2 mm |
1 x | 6 mm M3 variable inclined horn |
1 x | Silicone 0,35 qmm servos wire Futaba (100 m) |
2 x | 3,2 mm Prop Adapter M6 |
1 x | Landing gear retract neumatic (Jet Legend) |
1 x | PIX Hawk with accesories |
1 x | Digital Air Speed Sensor And Pitot Tube Set |
1 x | 2.3 mm Adapter for 30 mm spinners |
3 x | Prop Shaft Adapter 4 mm/M8 "long" 35 mm |
1 x | Oracover ROYAL RED 2m |
1 x | EWC6 40 cm wing connector |
2 x | Cap closure 33/23.5mm (2 uds) |
2 x | Screw-lock connector M2 (2 uds) |
1 x | 13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
1 x | Fully Threaded Steel Rod M3 |
2 x | Cable tie mounts 4.3 (4 uds) |
1 x | 28x12 prop Super Silence |
2 x | 5 mm M2 variable horn |
1 x | Horn mando long (2 pcs) |
2 x | Medium extra-strong control horn with bearing 2,8x24 |
2 x | Window mounting channel 5m |
1 x | Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch 5 m |
1 x | Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch 7 m |
1 x | Wing bolts M6 Steel screw Blue (2 pcs) |
1 x | Carbon fiber rod 1.5 mm x 1000 mm |
1 x | Straightened rod Ø 1.5 mm x 1500 mm |
1 x | Silicone 0,14 qmm servos wire Graupner (5 m) |
1 x | M2-250 mm Carbon Fiber Adjustable Push Rod Sets (2 pcs) |
1 x | Silicone 0,25 qmm servos wire Graupner (5 m) |
1 x | Horn mando small (2 pcs) |
1 x | Fully Threaded Steel Rod alumin 40 mm M2,5 (2 pcs) |
1 x | Aluminun wheel collar 5 mm Ø (4 uds) |
2 x | Prop Shaft Adapter 8 mm/M12 "long" |
1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 10 m |
1 x | Carbon roving DowAksa / 24k / 1600 tex |
1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 100 m |
1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m |
1 x | Conector JAPAN G2 Set 5 pares |
1 x | Decorative caps, multicoloured |
1 x | Mini Infrared Thermomiter |
1 x | Stainless steel cable Ø 0.5 mm (2 m) |
1 x | PPM Encoder Module |
1 x | 50N turbine start protection tube |
1 x | Extension 5 lipos JST/C - JST |
3 x | Aluminun wheel collar 4 mm Ø (4 uds) |
1 x | Interruptor SPS 70v 60/120A |
2 x | 2 mm Prop Adapter M6 |
1 x | Interruptor RX/Batterie |
1 x | 100 mm rods set for direction control |
1 x | Male connector for 16 pines AWG |
1 x | Yellow smoke canister 140 g |
1 x | Locking cable tie 3.2x142 (uds) |
1 x | Crimping sleeves for cable 1.3 mm (10 pcs) |
1 x | Canopy Lock V1 M3 Blue (2 pcs) |
1 x | Stainless steel cable Ø 0.5 mm (10 m) |
1 x | Canopy Lock V1 M3 Red (2 pcs) |
2 x | Horizontal cockpit anchor "tipe F3A" (2 pcs) |
1 x | Aluminium alloy coupler for carbon tube 6/M4 |
1 x | Wheel collar 6 mm Ø (4 uds) |
1 x | 29x12 prop Super Silence |
1 x | Window mounting channel Type H 2.5x0.5 (2 m) |
1 x | Aluminun wheel collar 3 mm Ø (4 uds) |
1 x | Oratex White 2m |
1 x | Stainless steel cable Ø 0.62 mm (10 m) |
1 x | 30cm Flexible Stainless Steel Exhaust Tubing D=25mm |
2 x | Wheel collar 3 mm Ø (4 uds) |
1 x | Parachutist |
1 x | MAX BEC 2 |
1 x | Opto Gas Engine Kill Switch |
1 x | Aluminun wheel collar 2.5 mm Ø (4 uds) |
2 x | Aluminun wheel collar 6 mm Ø (4 uds) |
1 x | 45 mm rods set for direction control |
2 x | Pushrod octagone 3/2 with coupler M2 |
1 x | |
1 x | PSC 6 |
2 x | Pushrod octagone 4/3 |
1 x | Oracover Black 10 m |
1 x | Three-position switched channel, short |
1 x | Ventral support for AX-18/AX-60 |
1 x | Ply-Span 450x600/13g Orange |
1 x | Oracover CHROME 2m |
1 x | Prolonguer for Balancer Thunder Power 6S |
1 x | Mahogany wood slat 1.5x1.5x1000 mm |
1 x | B4-0 rocket charges (6 pcs) |
1 x | Oratex Antik 2m |
1 x | 3 mm metalic joint for DA-35 or DA-75 cilinder/elbow |
1 x | PowerBox SparkSwitch RS |
1 x | Fully Threaded Steel Rod M2,0 (2 uds) 250mm |
1 x | wing/fuselage connector for 16 pines AWG 20-24 |
1 x | Pushrod greyline 3/2 with coupler M2 L: 1000 mm |
2 x | STEERING FRONT WHEEL SYSTEM BIDULE 55 |
1 x | 500 ccm gasoline fuel tank |
2 x | Clip fixing for wing (2 pcs) |
1 x | 10cm Flexible Stainless Steel Exhaust Tubing D=25mm |
1 x | 80 mm rods set for direction control |
1 x | Control horn long w/ball |
1 x | Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 4 mm |
1 x | Brass rod Ø 0.5 mm x 1000 mm |
1 x | Long adjustable aluminium control horn 2,8x24 |
2 x | Small control horn with bearing (2 pcs) |
1 x | Round Rod 1,5x1000 mm |
2 x | 6 mm M3 variable horn |
3 x | Brass control horn M2 long for wire (10pcs) |
2 x | Long extra-strong control horn with bearing 2,8x34 |
1 x | Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 6 mm |
2 x | Horn DU-BRO 1/2 (2 pcs) |
1 x | ABS Strip 1.0x2.0x1000 mm |
1 x | Fully Threaded Steel Rod M2,5 (2 uds) |
1 x | Round Rod 3,0x1000 mm |
1 x | Short extra-strong control horn with bearing 2,8x15 |
2 x | Rudder forward 90x28 "type Kato" |
2 x | Extra-long adjustable aluminium control horn 2,8x34 |
2 x | Prop Shaft Adapter 5 mm/M8 "long" |
1 x | 140 mm rods set for direction control |
2 x | Indoor hinge with servo arm integraded |
1 x | Cable Cargador FUTABA |
1 x | Sun Cover PC 21 XXL (JMB Jets) |
1 x | Fully Threaded Steel Rod alumin 30 mm M2,5 (2 pcs) |
1 x | White silicone 0,25 qmm wire (100 m) |
1 x | Long adjustable control horn with bearing |
1 x | Set Threaded coupler ALU M2,5 Ø 4 (2 uds) |
1 x | Turnbuckle M1,6x20/30 (2pcs) |
1 x | Cabel "Y" 30 cm (graupner) |
1 x | Silicone red 0,25 mm² wire (25 m) |
1 x | Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 5 mm |
1 x | JETImodel SINGLE BEC |
1 x | Pushrod octagone 4/3 with coupler M3 |
1 x | STEERING FRONT WHEEL SYSTEM BIDULE 111 |
1 x | 5 mm M2 variable inclined horn |
1 x | Cabel PVC 2 x 0.25 mm2 (5 m) red-black |
1 x | Duralumium F3A horn 30x10x23,5 mm (2 pcs) |
1 x | Cabel "Y" 30 cm (Futaba) |
1 x | JR silicone servo wire 0,35 qmm / 5m |
1 x | Adjustable brass horn threaded M3 |
1 x | Wheel collar 2 mm Ø (4 uds) |
1 x | Pushrod greyline 3/2 with coupler M2 |
1 x | PVC 0,25 qmm 4 line servos wire JR/Graupner (5 m) |
1 x | Silicone 0,25 qmm servos wire Graupner (100 m) |
1 x | 105 mm PVC transparent battery termo-retract 68 mm (1 m) |
1 x | Silicone 0,14 qmm servos wire Graupner (100 m) |
1 x | Horns indoor |
1 x | Neumatic retractable landing gear (Aero-Naut) |
1 x | Mini neumatic retract landing gear |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (10 pcs) |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (20 pcs) |
1 x | Air pressure gauge |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x6.0 mm (5 pcs) |
1 x | Cyanoacrylate MD GLUE plus 405, for extreme loads 20g |
1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m |
1 x | Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 50M |
1 x | CA Glue fast 20g |
1 x | Release wax 250ml |
1 x | Wing-connector: Glass / Carbon tube (13.7/12.5) x 1000 mm |
1 x | Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x4.0 mm (5 pcs) |
1 x | Vacuum bag, 1200 mm x 50 m |
1 x | Digital scale up to 40 kg |
1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 20 m |
1 x | Hardener Aero EPH 161 (250 g) |
1 x | PARTALL® Hi-Temp Wax, 340 g |
1 x | Beech dowels 3.0 x 1000 mm |
1 x | MZ-12, 6 Channel HoTT |
1 x | Extension silicon 10 cm (Futaba) |
1 x | Spinner fixed propeller 60 mm / 5,0 mm |
1 x | Receiver replacement antenna, approx. 85 |
1 x | Distanzstück motor OS 120 AX |
1 x | Receiver replacement antenna, approx. 15 |
1 x | Beech dowels 4.0 x 1000 mm |
1 x | Transmitter Crystal 35 Mc/s Ch 77 |
1 x | Y-Hose connector 4mm |
1 x | 40,0 mm hydro-propeller (left hydropropeller) |
|
31,453.56EUR |