1 x | 20 mm carbon horn |
1 x | Horn 16,5x20 mm (2 pcs) |
1 x | Clip mini fixing for wing (2 pcs) |
2 x | Horn with ball 55x40 |
1 x | Brass control horn M4 short for wire (10pcs) |
1 x | 5 mm M2 variable horn |
1 x | Aluminun wheel collar 4 mm Ø (4 uds) |
1 x | Cabin latch Fox MDM1 4m (pair) |
1 x | Aluminun wheel collar 5 mm Ø (4 uds) |
1 x | Horn 6/35 with M3 Bearing |
2 x | Cable grommet Ø 6.4 mm (4 uds) |
1 x | Horn mando long (2 pcs) |
1 x | Horn F3A de Titanium 16 mm (2 units) |
1 x | Allen wheel collar M3x3 |
1 x | Brass control horn M2 short for wire (2 pcs) |
1 x | Control horn long w/ball |
1 x | Horn mando small (2 pcs) |
1 x | Adjustable brass horn threaded M3 |
3 x | Cable grommet Ø 4 mm (4 uds) |
2 x | 100 mm rods set for direction control |
2 x | Canopy Lock V1 M3 Red (2 pcs) |
2 x | Allen wheel collar M3x5 |
1 x | 38x4,5 mm wires output (2 pcs) |
1 x | Cable control set |
1 x | 90 mm rods + T patellas set for direction control |
1 x | Fully Threaded Steel Rod M2,5 (2 uds) |
2 x | Cable grommet Ø 5 mm (4 uds) |
1 x | 5 mm M2 variable inclined horn |
1 x | Clip fixing for wing (2 pcs) |
1 x | Aluminun wheel collar 3 mm Ø (4 uds) |
1 x | Horn for flap control (1 pcs) |
1 x | Canopy Latch |
1 x | Aluminun wheel collar 6 mm Ø (4 uds) |
2 x | Aluminun wheel collar 3.5 mm Ø (4 uds) |
1 x | Brass control horn M4 short for wire (4 pcs) |
1 x | Extra long horn 60x30 |
1 x | Duralumium F3A horn 30x10x23,5 mm (2 pcs) |
1 x | Horn 6/27 with M3 Bearing |
2 x | Canopy Lock V1 M3 Blue (2 pcs) |
1 x | Horn micro type4 Ø 0,5 (2 pcs) |
1 x | 250 mm / 16 mm Airbrakes |
1 x | Aluminium alloy coupler for carbon tube 6/M4 |
1 x | Horn 6/20 with M3 Bearing |
2 x | Cable grommet 9.5 mm (4 uds) |
2 x | Cable with accesories |
2 x | Allen wheel collar M4x4 |
1 x | 6 mm M3 variable horn |
1 x | 45 mm rods set for direction control |
1 x | Cable tie mounts 4.3 (4 uds) |
1 x | 11 mm Rubber pads (14 pcs) |
1 x | Brass control horn M4 long for wire (4 pcs) |
1 x | 100 mm rods + T patellas set for direction control |
1 x | 140 mm rods + T patellas set for direction control |
1 x | Horn 13,5x16 mm (2 pcs) |
1 x | 6 mm M3 variable inclined horn |
1 x | Horn DUBRO 1/2A |
1 x | Brass control horn M2 long for wire (10pcs) |
1 x | Cockpit aluminium closing |
1 x | Horn 5/10 with M2 Bearing |
1 x | Horn 5/20 with M2 Bearing |
1 x | Horn with ball 40x30 |
1 x | 6 mm aluminium horn with patella |
1 x | SE Ring 200 mm (2 pcs) |
1 x | SE Ring 480 mm (2 pcs) |
2 x | 10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
1 x | Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs) |
1 x | Cinta Goldfix 1m |
1 x | SE Ring HACKER 300 mm (2 pcs) |
3 x | 20x1000 mm Ring Strap Back To Back |
1 x | Foil for sticking flaps and ailerons |
2 x | 14x60 mm Mini rings Tie Wraps (4 pcs) |
2 x | Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs) |
2 x | 26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
3 x | SE Ring 250 mm (2 pcs) |
2 x | 13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
2 x | SE Ring 360 mm (2 pcs) |
3 x | 13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
1 x | 5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
1 x | Marker ties (20 pcs) |
1 x | Tape GFK 50 mm |
1 x | SE Ring 330 mm (4 pcs) |
1 x | 20x200 mm battery rings |
1 x | SE Ring 400 mm (2 pcs) |
2 x | SE Ring 450 mm (2 pcs) |
1 x | Aluminium tube (L 1000 mm, Ø3.0 mm, Ø2.1 mm) |
1 x | Conector BEC male (10 pcs) |
1 x | Conector MR-60 (pareja) |
2 x | ABS tube 16.0x14.0x1000 mm |
1 x | Conector XT-30 (hembra) |
1 x | Conector XT-30 (macho) |
1 x | Connectors banana oro 6,0 mm Ultralight (M/F) |
1 x | ABS tube 7.0x6.0x1000 mm |
1 x | Connectors banna gold 5,5 mm (M/F) |
1 x | Carbon tube (L 1000 mm, Ø14 mm, Ø12 mm) |
1 x | Carbon tube (L 1000 mm, Ø18 mm, Ø16 mm) |
1 x | Conector JR Servo male (50 pcs) |
1 x | Conector AS150 7mm antichispazo (Set: 2 pares) |
2 x | Brass hexagonal rod Ø 3.5 mm x 1000 mm |
1 x | Steering arm 12 mm Ø 4 mm (2 uds) |
1 x | Landing gear frontal support 29x26x13,5 |
2 x | Crimping sleeves for cable 0.85 mm (10 pcs) |
2 x | Straightened rod Ø 1.0 mm x 1000 mm |
2 x | Straightened rod Ø 6.0 mm x 1000 mm |
3 x | Straightened rod Ø 1.2 mm x 1500 mm |
1 x | Straightened rod Ø 5.5 mm x 1000 mm |
2 x | Screw-lock pushrod conn snap Ø 1.5 mm (2 uds) |
2 x | Straightened rod Ø 2.0 mm x 1000 mm |
1 x | 28x5 mm wires output (2 pcs) |
1 x | 41x5,5 mm wires output (2 pcs) |
1 x | Lead with adhesive (2 pcs) |
1 x | Control for forward wheel (MINI) |
1 x | Tip wing protector 40x14 (2 pcs) |
1 x | Split pin 1x8 mm (10 uds) |
1 x | Straightened rod Ø 1.5 mm x 1000 mm |
2 x | Straightened rod Ø 0.5 mm x 1000 mm |
1 x | Straightened rod Ø 1.5 mm x 1500 mm |
1 x | Straightened rod Ø 14.0 mm x 1000 mm |
2 x | Straightened rod Ø 3.0 mm x 1000 mm |
1 x | Locking cable tie 2.5x100 (uds) |
1 x | Crimping sleeves for cable 0.70 mm (10 pcs) |
1 x | Snap pin for micro clevis (10 uds) |
1 x | Tip wing protector 30x10 (2 pcs) |
1 x | Brass hexagonal rod Ø 5 mm x 1000 mm |
2 x | Steering arm 16 mm Ø 4 mm |
2 x | Xplorer1 anemometro |
2 x | Xplorer4 anemometro |
3 x | Xplorer3 anemometro |
2 x | 1/6 Pilot "Garry" |
1 x | Piloto Jet "Green" 1/6 Scale |
1 x | Glases Flitemaster |
1 x | Extension S-Bus 1-2 silicon 120 cm FUTABA |
1 x | Screw-lock connector Ø 2 mm (2 uds) |
1 x | Carbon rectangular rod 10.0 mm x 1.0 x 1000 mm |
1 x | Fully Threaded Steel Rod alumin 30 mm M2,5 (2 pcs) |
2 x | SE Ring 300 mm (2 pcs) |
2 x | Ring 320 mm length (5 pcs) |
1 x | Tape GFK 25 mm |
3 x | 20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
1 x | Glass Bubbles 0.19 g/cm³ Panda, tin/ 120 g (approx. 1 l) |
1 x | Epoxy Resin L 285 + Hardener 386, kit/ 3.355 kg |
1 x | |
1 x | MEKP Harderner 100 g |
1 x | resin-hardener L-385 H-385 (1250 g) |
1 x | Epoxy Resin L 285 + Hardener 386, kit/ 675g |
1 x | Straightened threaded rod M2-1m |
1 x | Cable grommet Ø 3.2 mm (4 uds) |
1 x | PIT (Aero-Naut) |
1 x | Brass rod Ø 0.5 mm x 1000 mm |
1 x | Connectors MPX male (PIN double) |
1 x | XH male balance (9S) connector (2 pcs) |
1 x | Connectors DEANS (T) micro |
1 x | CF tube (L 1000 mm Ø0,7 mm, Ø0,3 mm) |
1 x | ABS tube 10.0x8.0x1000 mm |
1 x | Aluminium tube (L 1000 mm, Ø7.0 mm, Ø6.1 mm) |
1 x | ABS tube 18.0x16.0x1000 mm |
1 x | ABS tube 5.0x4.0x1000 mm |
2 x | Aluminium tube (L 1000 mm, Ø5.0 mm, Ø4.1 mm) |
1 x | Hard brass tubing (L 1000 mm, Ø3.0 mm, Ø2.1 mm) |
1 x | MR30 connector female |
1 x | Carbon tube (L 1000 mm, Ø1.5 mm, Ø0.7 mm) |
1 x | XH male balance (5S) connector (2 pcs) |
2 x | RUDDOG Protection and Heat Shield Tape (2mx50mm) |
2 x | ABS tube 5.0x3.0x1000 mm |
1 x | MR30 connector male |
1 x | SE Ring 350 mm (2 pcs) |
2 x | Pad self adhesive, up to 3mm / 0.12″, (10 pcs) |
1 x | Stainless steel cable Ø 0.5 mm (2 m) |
1 x | Steering arm 16 mm Ø 3 mm |
1 x | Stainless steel cable Ø 1.3 mm (10 m) |
1 x | Vertical cockpit anchor "tipe F3A" (2 pcs) |
1 x | Covered closure or fairings |
1 x | Locking cable tie 4.6x203 (uds) |
1 x | Stainless steel cable Ø 0.52 mm - 15 kp (10 m) |
1 x | Quick hose connector 4-4 mm |
1 x | Landing gear axle Ø 5 mm (2 uds) |
1 x | Y-Hose connector 3-3-3 mm |
1 x | Y-Hose connector 4mm |
1 x | Beech dowels 2.0 x 1000 mm |
1 x | Cockpit plastic closing |
2 x | Brass hexagonal rod Ø 4 mm x 1000 mm |
1 x | Micro screw-lock pushrod conn snap Ø 1 mm (2 uds) |
1 x | Stainless steel cable Ø 0.62 mm (10 m) |
1 x | Xplorer2 anemometro |
1 x | Fully Threaded Steel Rod SUS303 70mm M3 (2 pcs) |
1 x | Piloto jet 130 mm |
1 x | Pilot JAN 1/4 Saiplanes |
1 x | 1/12 Pilot "Cougar" |
1 x | Spannlack 1000 ml |
1 x | Propeller 3x3 |
1 x | 500 ml sealer (DOPE) |
2 x | Connectors MPX male |
1 x | Waterproof adhesive tape, width 19mm, length 25m |
1 x | Spikes Band (5 m) |
2 x | Silicone adhesive ELASTOSIL® E4, tube/ 90 ml |
2 x | |
1 x | Partall paste 650 g |
1 x | Spray YELLOW Inca Lexan 150ml |
1 x | Release wax 250ml |
1 x | Propeller 11x4,7 SlowFlyer |
1 x | Presto SF Light Filler styrene-free (420 g) |
2 x | Universal Colour Paste white 50 g |
1 x | |
1 x | SE Ring 240 mm (2 pcs) |
1 x | Epoxy Resin L + Hardener CL (60 min) kit/ 930 g |
1 x | Hardener Aero EPH 161 (250 g) |
1 x | Aluminium rod Ø 4.0 mm x 3000 mm |
1 x | Straightened rod Ø 0.8 mm x 1000 mm |
1 x | Brass rod Ø 0.8 mm x 1000 mm |
1 x | Brass rod Ø 1.5 mm x 1000 mm |
1 x | Carbon tube (L 1000 mm, Ø4 mm, Ø2,5 mm) |
1 x | Kardan Black (without pinions) |
1 x | Rigid coupling brass Ø 2 mm L: 15 mm |
1 x | L-Connector 1.5 mm x 1000 mm |
1 x | Micro control horn (2 pcs) |
1 x | Spinner propeller pleg. 38 mm / 5,0 mm |
1 x | Autogyro Cierva C30 Spain |
1 x | Sandwich carbon + poplar 3mm + carbon 480x290 mm |
1 x | Turbina JetsMunt M210TS |
1 x | RANGER Jet NAVY 1.854mm combo |
1 x | SLICK 103" Red/Yellow/Black ARF (Color 2) 2630 mm |
1 x | ABS tube 4.0x2.0x1000 mm |
1 x | VIPER JET 2.2m + Electric landig Gear Deco: 01 Red-Blac-kWhit |
1 x | ABS tube 7.0x5.0x1000 mm |
1 x | Carbon tube (L 1000 mm, Ø2 mm, Ø1 mm) |
1 x | ABS tube 14.0x10.0x1000 mm |
1 x | ABS tube 8.0x7.0x1000 mm |
1 x | BULLIT Wing 1095 mm |
1 x | Spare Shaft Ø6mm L:450mm M5 |
1 x | T-Connector 4.0 mm x 1000 mm |
1 x | Rigid coupling brass Ø 4 mm L: 25 mm |
1 x | Cross Connector 4.0 mm x 1000 mm |
1 x | PARAGON Trainer 46-55 1580 mm |
1 x | Spinner propeller pleg. 32 mm / 6,0 mm |
2 x | Blades 330mm |
1 x | Spinner propeller pleg. 45 mm / 6,0 mm "Z" |
1 x | LA500 cyclic central part |
1 x | Alignment dowels (2 parts, outer-Ø 8 mm) bag/ 100 pairs |
1 x | Glases Innovation Plus |
1 x | Aceite SHELL 560 Turbina 0.9Kg |
1 x | Fiberglass tube 6/4x1000mm |
1 x | PT 22x10 EL Propeller |
1 x | Servo NARO Max Std |
1 x | Solvent Plasti Dip 1000 ml |
1 x | 1000 ml sealer (DOPE) |
1 x | Propeller 8x4 Electric |
1 x | Plasti Dip Liquid Tape 429 ml black |
1 x | 20 g tin paste |
1 x | Spray Graphit 33 |
1 x | Spray adhesive AEROFIX 2 |
1 x | Hobbylite Filler, Balsa colour |
|
13,480.31EUR |