2 x | Red copper lacquer wire Ø0,2 mm (5 m) |
1 x | Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH |
3 x | 5 LiPo XH>EH adapter |
1 x | Balanceradapter JST-XH (Heli 47G) 2-6 c. |
2 x | JETImodel SINGLE BEC |
3 x | MPX-Dean "T" Adapter |
2 x | DUPLEX USBa USB-Adapter for Jeti Duplex Items |
3 x | 30 cm BEC cable (female) |
3 x | Black copper lacquer wire Ø0,2 mm (5 m) |
2 x | 3 LiPo XH>EH adapter |
3 x | Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH |
5 x | TP/TopFuel - JST-EH 4/5S Adapter |
1 x | USB HLS prog. interface |
1 x | "Y" charging 4mm wire (2 IN-1 OUT). |
2 x | 30 cm BEC cable (male) |
3 x | CC 01 |
1 x | 2 LiPo XH>EH adapter |
1 x | Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm) |
3 x | Cabel charger transmitter GRAUPNER |
1 x | APM2.6 Power module with 5.3V DC BEC |
3 x | Copper lacquer wire Ø0,2 mm (5 m) |
2 x | Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm) |
3 x | Circlick securite |
3 x | Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH |
2 x | TrainerCord (master-learner) |
2 x | CellPRO 4S Adaptader (GP/KO up to 4S) |
3 x | Adapter lead MPX/XT60 |
1 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m |
2 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x4.0 mm (5 pcs) |
1 x | Glass fabric tape 49 g/m² (Interglas 02037, finish FE 600/800, p |
1 x | Carbon Non-Woven, 160 g/m² 127 cm 1 m |
1 x | Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 100M |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (10 pcs) |
2 x | Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m |
1 x | Vacuum bag, 1200 mm x 50 m |
2 x | Carbon fabric 160 g/m² (plain weave) 100 cm x 3 m |
2 x | Fibra carbono 3k tela 160g/m2 100 cm x 5m |
2 x | Carbon Non-Woven, 160 g/m² 100 cm 10 m |
2 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 100 m |
2 x | Carbon Non-Woven, 160 g/m² 100 cm 5m |
1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 20 m |
2 x | ARAMID honeycomb 1300x2600x2 mm |
2 x | Motor A2212/13T |
2 x | Interface Realflight Simulator |
1 x | Straightened rod Ø 0.5 mm x 1000 mm |
1 x | Extension silicon 10 cm (Futaba) |
1 x | Brass hexagonal rod Ø 3 mm x 1000 mm |
1 x | Ring 320 mm length (5 pcs) |
1 x | XH male balance (3S) connector (2 pcs) |
1 x | Oracover light Grey 2m |
1 x | Threaded coupler ALU M2 Ø 4 (2 uds) |
1 x | Pin hinge 39x20 mm (10 uds) |
1 x | ABS tube 3.0x2.0x330 mm |
1 x | 20 g tin paste |
1 x | Carbon fiber rod 1.5 mm x 1000 mm |
1 x | Universal Colour Paste deep black 50 g |
2 x | Adapter lead MPX/EC3 |
2 x | CC 05 |
1 x | DPSI Ampere battery backer |
3 x | Double conector with JR adapter and 200 mm extension |
1 x | SBEC 30 D |
2 x | USB interface ALTIS |
2 x | Sandwich Carbon fibre Rohacell (800 x 280 x 3 mm) |
1 x | Short Switch On/Off micro |
1 x | SPARK Switch 7.4v |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x6.0 mm (5 pcs) |
1 x | wing/fuselage connector for 12 pines AWG 20-24 |
1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m |
1 x | Thermoforming sheet 0.5mm (0.02in) DIN A4 |
2 x | Sandwich carbon + poplar 3mm + carbon 290x160 mm |
1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m |
1 x | Sandwich carbon + poplar 3mm + carbon 480x290 mm |
1 x | Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m |
1 x | PVC plate 320 x 194 x 0.23 mm (brown) |
1 x | Thermoforming sheet 0.3mm (0.039in) DIN A4 |
1 x | Teflon rollers 40 mm x 15 mm Diam. |
2 x | Fiberglass plate 350x150x2.0 mm |
2 x | Styrene plate 320x120x1.0 mm |
2 x | Fiberglass plate 350x150x4.0 mm |
2 x | Sandwich carbon + poplar 2mm + carbon 480x290 mm |
1 x | Opto Gas Engine Kill Switch |
2 x | Sandwich carbon + poplar 4mm + carbon 480x290 mm |
1 x | Carbon Non-Woven, 160 g/m² 127 cm 5m |
2 x | PSC 6 |
1 x | Carbon plate 350x150x1.0 mm |
1 x | Foam plastic plates (310x210x8 mm) |
1 x | Carbon plate 350x150x4.0 mm |
1 x | PET film Mylar® A 350, 50 cm, roll/ 5 m |
1 x | Carbon Fiber TeXtreme® 80 g/m² (plain) 100 cm, roll/ 10 m |
1 x | ABS 500 x 400 x 2,0 mm (white) |
1 x | Carbon fabric 68 g/m² (style 493 aero, plain weave) 100 cm |
1 x | Glass fabric 80 g/m² (Interglas 05533, finish FK 144, twill weav |
2 x | Peel ply 93 g/m² (plain weave) 150 cm x 5m |
1 x | Styrene plate 320x120x0.5 mm |
2 x | Glass fabric 163 g/m² 130cmx10m (Interglas 92105, aero, finish |
1 x | Glass fabric 25 g (2 m²) |
1 x | Fiberglass plate 350x150x0.5 mm |
2 x | Parachute XTRALITE S |
3 x | 4 LiPo XH>EH adapter |
1 x | Slave-cable USB Easy Sim |
1 x | Strip ABS 2.0x5.0x1000 mm |
1 x | Transmitter Balancer Futaba FF9-DX7-JR-Hitec |
1 x | Tray FUTABA T6K,T10J,T12K,T14SG,T16iZ,T18SZ,T18MZ,T32MZ |
1 x | Decorative caps, multicoloured |
1 x | Switch Cap L (black) |
1 x | Switch Cap L (Blue) |
2 x | Aluminium Hub "Z" for folding Props 30 mm M8 Shaft 5 mm |
1 x | Female connector JST SH 1.0mm with 10 cm wire |
1 x | Female connector for 6 pines AWG |
1 x | Male Prolonger TP 4/5S |
1 x | Connector CAN 15 |
2 x | Aluminium Hub for folding Props 37 mm M8 Shaft 5 mm |
2 x | A50 Backmountset complete |
3 x | Axle for motor A20-S (3 uds) |
1 x | A50 Backmountset complete V3/V4 |
3 x | Backmountset complete A40 |
2 x | Aluminium Hub "Z" for folding Props 38 mm M8 Shaft 8 mm |
3 x | Disipador para motor Hacker B 20 (or motors up to Ø20 mm) |
3 x | Connectors banna oro 8,0 mm 5 pcs(Female) |
2 x | A30-M/L/XL Backmountset complete |
4 x | A60 Motor Mount Alu complete set |
2 x | Esc MasterBasic 55SB |
3 x | Battery LiFe TopFuel 3100 mAh 4s MTAG 30C |
2 x | Aluminium Hub for folding Props 43 mm M8 Shaft 5 mm |
2 x | A40 Backmountset complete |
2 x | Battery LiFe TopFuel 3100 mAh 2s MTAG 30C |
2 x | Esc MasterBasic 90 Opto |
1 x | Aluminium Hub for folding Props 35 mm M8 Shaft 6 mm |
3 x | EDF Stream-Fan 110mm kv780 |
2 x | A50 Motor Mount Alu complete set |
2 x | Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm) |
1 x | CC 03 |
2 x | Male/Female prolonguer for Balancer Thunder Power 6S |
1 x | CC 02 |
1 x | Female prolonguer XH 30 cm 6 cell cable of silicone 0,25 mm |
3 x | TP/TopFuel - XH 2/3S Adapter |
3 x | Interruptor RX/Batterie |
1 x | Extension 2/3 lipos JST - JST/C |
1 x | Fresa corte diamante Ø 1.4mm (bola) |
1 x | Suncover 100cc Red |
2 x | Sandwich carbon + poplar 2mm + carbon 290x160 mm |
1 x | Fiberglass 5000x1100 mm 49 g/m² |
1 x | Chopped glass fibre strands 3 mm |
1 x | Demoulding wedge red (40 x 20 mm) 5 pcs |
1 x | Fiberglass plate 620x540x2,0 mm |
1 x | Colormatic 2K Soft fine putty white, 1 kg |
2 x | Fiberglass plate 350x150x0.3 mm |
1 x | Fibra vidrio 25g 110 cm/ 10m (Interglass 02034, finish FE800 pl |
1 x | Foam plastic plates (310x210x3 mm) |
2 x | Fiberglass plate 1200x1000x0,2 mm |
1 x | Carbon plate 550x350x1.0 mm ECOTECH |
2 x | DPS Switch JR/JR |
2 x | Electronic switch JETI SP6 0-15v/6A |
1 x | Fibra de vidrio 80 g/m² (10 m x 100 cm) |
1 x | Fiberglass plate 620x540x3,2 mm |
1 x | Release film 100 cm x 50 m |
1 x | Fiberglass 163 g/m² 1m x 50 m (Aero, finish FK 144, plain) |
1 x | Film release agent PVA 25 ml |
1 x | DPSI magnetic switch actuator (housing) |
1 x | Cabling for Fox MDM1 wings |
1 x | Fiberglass plate 350x150x3.0 mm |
1 x | Fiberglass 25 g/m² 5000x1270 mm |
1 x | resin-hardener package L-385 with hardener H-385 (875 g) |
1 x | Trailing leg 131 mm |
1 x | Mini neumatic retract 4 mm landing gear (Het-rc) |
1 x | Fiberglass plate 350x150x2.5 mm |
1 x | Fibra carbono tela 160g/m2 100 cm x 2 m (twill weave) |
1 x | Fibra de vidrio 80 g/m² (3 m x 100 cm) |
1 x | Glass fabric 160 g/m² (Twill weave) 100 cm x 50m |
1 x | 2,3 mm Prop Adapter M6 |
1 x | Prop Shaft Adapter 6 mm/M8 "long" 35 mm |
1 x | Propeller POWER-PROP 14x9 |
1 x | Copier 2x20 cm pcs |
1 x | Boxed KIT OF 7 Rotary Burrs FINE |
1 x | Dremel PERMAGRIT 18 mm round lime |
1 x | Fresa corte diamante Ø 2.3mm (bola) |
1 x | Red aluminium servo arm V1-Futaba 15 mm iM2 |
1 x | Crystal TX 35.180 Ch 78 |
1 x | 9x4.7 * 22x12 carbon propeller |
1 x | Breatex™ Non-woven absorber 300 g/m² Roll 41 m |
1 x | Dumper propeller 6/8 mm |
1 x | Aero-Master Cabine (Aero-naut) |
1 x | 5 mm Prop Adapter CN-Spinner |
1 x | Servo HITEC HS-5125 MG Slim Metal Gear Wing Servo |
1 x | Servo HITEC D131 MW nano |
1 x | Servo HITEC HS-125 MG |
1 x | HPP-21 PLUS PC and Field Programmer for Hitec Digital Servos |
1 x | Xoar Electric Beechwood Prop 12x6 |
1 x | Dremel 3000 130W |
1 x | Dremel PERMAGRIT thin lime |
1 x | |
1 x | 1,5x50 mm allen screwdriver |
1 x | Fresa corte diamante Ø 1.0mm (bola) |
1 x | Crimping tool |
1 x | Digital precision scale up to 2000 g |
1 x | Extra Hard Titanium Herxagon Screwdrivers |
1 x | Ball Link Plier |
1 x | 25 mm Sandpaper file |
1 x | 100g Flux Paste for Silver Solder |
1 x | 2,5x60 mm allen screwdriver |
1 x | Disposable Injector Bags (30x16cm) 100 pcs |
1 x | Fresa corte diamante Ø 2.35mm (flame) |
1 x | ABS 500 x 400 x 0,5 mm (white) |
1 x | Aluminium cap bolt washer M3 red (8 pcs) |
1 x | Teacher-Pupil-cable all FrSky Transmitter |
1 x | Micro Crystal RX 35.160 Ch 76 |
1 x | Micro Crystal RX 35.070 Ch 67 |
1 x | Crystal RX 35.020 Ch 62 |
1 x | VBar Control RX-Satellite |
1 x | Turnbuckle M2x22/35 (2pcs) |
2 x | Esc MasterSPIN 16 Pro |
1 x | Axi for motor A40-L Motor 8-Pole-Electric Turbine |
2 x | JETImodel Addcap 820 |
1 x | Shaft for A60-L V4 |
2 x | FesEx-Uni8 System |
2 x | Alu-Cross for Backmount of A60-V2-Backmountmotors |
2 x | Esc X-75-OPTO-Pro |
1 x | LiPo TopFuel ECO-X 5000 mAh 3s 20C MTAG |
1 x | Adapter 3,2 mm M8 |
1 x | Motor B40-10 L |
1 x | Male connector for 12 pines AWG |
1 x | Motor B50-14 S |
2 x | Battery LiFe TopFuel 3100 mAh 3s MTAG 30C |
1 x | Motor A30-12 XL Glider |
1 x | Male connector for 10 pines AWG |
1 x | 3 copper lacquer wire Ø0,2 mm (1 m) |
1 x | PROFI Box JETI |
1 x | Esc MasterBasic 70SB |
1 x | Propadapter for motor A60-V2 |
2 x | DUPLEX 2.4EX RC Switch |
1 x | Cable adapter iCharger |
1 x | Adapter 5,0 mm M6 for spinner 40 mm fixed propeller |
1 x | Motor A20-20 L EVO |
1 x | Motor A60-6XS V4 28-pole kv370 |
1 x | Motor A50-14L Turnado V3 Glider |
2 x | Propadapter for motor A50 |
2 x | Screwdriver for Hexagon 1,27mm |
1 x | Connector Sub-D 2+5 Male |
2 x | Futaba External voltage input cable Futaba CA-RVIN-700 |
1 x | Sun Cover PC 21 XXL (JMB Jets) |
1 x | Receiver DUPLEX REX 3 2.4 GHz |
2 x | Bearings for motors hacker A50 |
1 x | ProgBOX MASTER Hacker |
2 x | Esc X-70-OPTO-Pro |
1 x | Esc MasterSPIN 99 Pro OPTO |
1 x | Q80-8M V2 |
1 x | Ball Bearings for motor A60-V2 |
1 x | Para-RC "RC-Evo-Cross" Rescue |
1 x | Esc MasterBasic 40SB |
1 x | Para-RC Trike "RC-Bullix" |
1 x | Shaft for A60-L (140mm) |
2 x | JETImodel Addcap 1640 |
1 x | Xoar Electric Beechwood Prop 20x10 |
3 x | Axle for motor A50-L |
1 x | Propadapter for motor A50-V3 |
1 x | Shaft for A60-XS-V2 (112,5mm) |
2 x | Connectors banna oro 8,0 mm (Male) 5 pcs. |
1 x | Axle for motor A30-XL V2 |
2 x | Screwdriver for Hexagon 1,5mm |
2 x | Cable servo PREMIUM 1 m (blanco/rojo/negro) AWG21 + AWG26 TPE |
2 x | FesEx-Uni6 System |
4 x | Battery charging cable XT60 |
1 x | Screwdriver for Torx® TX8 |
2 x | Screwdriver for Torx® TX6 |
1 x | Motor A20-20 L EVO |
1 x | Fan for A60 |
1 x | Inlet lip (carbon) Stream-Fan 110 mm |
1 x | LiPo TopFuel ECO-X 2400mAh 4s 35C MTAG |
1 x | A60-6XS V4 28-Pole |
1 x | Esc MasterSPIN 100 Pro |
1 x | LiPo TopFuel ECO-X 3800mAh 4s 35C MTAG |
1 x | Xoar Electric Beechwood Prop 24x8 |
1 x | Lipo TopFuel 1450 mAh 2s slim RX 20C-ECO-X |
1 x | LiPo TopFuel ECO-X 3000 mAh 2s 20C MTAG |
1 x | Motor A60-7XS V4 28-pole kv330 |
1 x | Female connector for 12 pines AWG |
1 x | 4 mm Prop Adapter M6 |
1 x | Motor A20-6 XL 10-Pole EVO + 4,4:1 |
1 x | Motor A200-6 |
1 x | Motor A40-10 L V2 14-Pole Glider |
1 x | Aluminium alloy coupler for carbon tube 6/M4 |
1 x | Aluminun wheel collar 2.5 mm Ø (4 uds) |
1 x | MAX BEC 2D plus EX |
1 x | Motor A20-22 L EVO |
1 x | EWC3 40 cm wing connector |
1 x | Motor A30-14 M V2 6 Poles |
1 x | 3 mm Long Prop Adapter M5 |
1 x | Motor A50-12 L Glider |
1 x | Female connector for 16 pines AWG |
1 x | 12 mm dogdrive props |
1 x | Motor A10-7 L 4,4:1 |
1 x | Aluminun wheel collar 3 mm Ø (4 uds) |
1 x | A40-10S V2 8-Pole + 6,7:1 PG |
1 x | |
1 x | JETImodel DPS 40 |
1 x | 5 mm Prop Adapter M8 |
2 x | Dean "T" - Futaba Adapter |
1 x | CM-3 |
1 x | Bec MR UBEC 5A (5v/6v/7v) |
1 x | BEC 3A FOXY |
1 x | Prolonguer for Balancer Thunder Power 6S |
|
22,369.43EUR |