1 x | Liston HAYA 8 x 8 x 1000 mm |
1 x | BALSA triangular 15x15x1000 mm |
3 x | TP/TopFuel - JST-EH 4/5S Adapter |
3 x | 30 cm BEC cable (female) |
3 x | CC 01 |
1 x | Pine wood slat 3.0x10.0x1000 mm |
2 x | BEC 3A FOXY |
3 x | Balanceradapter JST-XH (Heli 47G) 2-6 c. |
2 x | Adapter lead MPX/EC3 |
1 x | Mahogany wood slat 3.0x3.0x1000 mm |
1 x | Pine wood slat 10x10x1000 mm |
1 x | BALSA trip 6.0x6.0x1000 mm |
1 x | BALSA triangular 6x6x1000 mm |
2 x | Pine wood slat 5.0x5.0x1000 mm |
1 x | Mahogany wood slat 2.0x2.0x1000 mm |
2 x | Adapter lead MPX/XT60 |
1 x | Beech dowels 4.0 x 1000 mm |
3 x | 30 cm BEC cable (male) |
2 x | BALSA trip 2.0x2.0x1000 mm |
1 x | BALSA leading edge 8x10x1000 mm |
2 x | 5 LiPo XH>EH adapter |
3 x | CM-3 |
1 x | Pine wood slat 2.0x10.0x1000 mm |
4 x | Copper lacquer wire Ø0,2 mm (5 m) |
1 x | BALSA trip 4.0x4.0x1000 mm |
3 x | Red copper lacquer wire Ø0,2 mm (5 m) |
1 x | Beech dowels 2.0 x 1000 mm |
3 x | Black copper lacquer wire Ø0,2 mm (5 m) |
1 x | Pine wood slat 2.0x2.0x1000 mm |
1 x | Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH |
3 x | USB HLS prog. interface |
1 x | Pine wood slat 3.0x5.0x1000 mm |
2 x | Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH |
3 x | 3 LiPo XH>EH adapter |
3 x | Pine wood slat 3.0x7.0x1000 mm |
2 x | Futaba External voltage input cable Futaba CA-RVIN-700 |
2 x | MPX-Dean "T" Adapter |
1 x | Beech dowels 3.0 x 1000 mm |
2 x | Cabel charger transmitter GRAUPNER |
1 x | Liston HAYA 3 x 10 x 1000 mm |
3 x | BALSA trip 2.0x10.0x1000 mm |
3 x | JETImodel SINGLE BEC |
2 x | Trailing edge BALSA 35x8x1000 mm |
3 x | CC 05 |
3 x | 3 copper lacquer wire Ø0,2 mm (1 m) |
1 x | Walnut wood slat 1.5x1.5x1000 mm |
1 x | OBECHI sheet 2.0x3.0x1000 mm |
4 x | Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm) |
2 x | Bec MR UBEC 5A (5v/6v/7v) |
1 x | Pine wood slat 1.5x3.0x1000 mm |
2 x | Jeti Black cap |
1 x | Brass rod Ø 0.8 mm x 1000 mm |
1 x | Straightened rod Ø 1.5 mm x 1000 mm |
1 x | Straightened rod Ø 1.0 mm x 1000 mm |
1 x | Straightened rod Ø 0.5 mm x 1000 mm |
1 x | Brass rod Ø 1.0 mm x 1000 mm |
1 x | Straightened rod Ø 3.0 mm x 1000 mm |
1 x | Brass hexagonal rod Ø 3.5 mm x 1000 mm |
1 x | Aluminium rod Ø 4.0 mm x 3000 mm |
1 x | Straightened rod Ø 7.0 mm x 1000 mm |
1 x | Brass hexagonal rod Ø 5 mm x 1000 mm |
1 x | Brass rod Ø 0.5 mm x 1000 mm |
2 x | 6 mm aluminium horn with patella |
2 x | Threaded coupler ALU Left M2,5 Ø 4 (2 uds) |
2 x | Brass control horn M4 short for wire (4 pcs) |
3 x | Small aluminium horn gold (2pcs) |
1 x | Threaded coupler ALU Left M3 Ø 4 (2 uds) |
1 x | Brass control horn M4 short for wire (10pcs) |
1 x | Horn 16,5x20 mm (2 pcs) |
1 x | 6 mm blue aluminium threaded horn with patella |
1 x | Brass control horn M2 short for wire (2 pcs) |
1 x | Cable control set |
1 x | Threaded coupler ALU M2,5 Ø 6 (2 uds) |
1 x | Threaded coupler ALU M2 Ø 4 (2 uds) |
2 x | Threaded coupler ALU M3 Ø 4 (2 uds) |
1 x | Threaded coupler ALU M2,5 Ø 3 (2 uds) |
2 x | Horn 6/35 with M3 Bearing |
1 x | Horn 6/20 with M3 Bearing |
2 x | Horn with ball 40x30 |
2 x | Horn 5/15 with M2 Bearing |
2 x | Horn with ball 55x40 |
1 x | Brass control horn M3 short for wire (2 pcs) |
2 x | 20 mm carbon horn |
1 x | Threaded coupler ALU M2 Ø 3 (2 uds) |
1 x | Foil for sticking flaps and ailerons |
1 x | Telemetry interface ALTIS 20 cm |
1 x | 4 mm Prop Adapter CN-Spinner |
1 x | Multi-adapter balancer JST - TP |
2 x | Servo slow down unit (0,7-14,7 sec ) |
1 x | Interruptor SAFET-SWITCH 12HV Twinbatt |
2 x | Extension 2/3 lipos JST/C |
2 x | 2,3 mm Prop Adapter M5 |
2 x | A/C quality beech plywood 600x300x0.8 mm |
3 x | Female connector for 6 pines AWG |
2 x | Linden wood slat 3.0x3.0x1000 mm |
1 x | Birch plywood plate 600x300x2.0 mm |
1 x | SPS Remote switch actuator |
1 x | BALSA trip 3.0x5.0x1000 mm |
1 x | BALSA trip 10x10x1000 mm |
1 x | Sun Cover BULL Mo1 2.6 (Hispano Aviacion) |
1 x | Balsa panel 3.0x100x1000 mm |
2 x | BALSA trip 3.0x3.0x1000 mm |
1 x | Horn 5/10 with M2 Bearing |
2 x | Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm) |
2 x | SyRen 10A 6V-24V Regenerative Motor Driver |
1 x | Gracia (Top Model) |
1 x | X-RAY Micro QR (Rudder) |
1 x | Avia spare fouselage CF reinforced (Top Model) |
1 x | X-RAY Micro QR (Fuselage with canopy) |
1 x | FANTASY ARF 3.0m, Fundas alas |
2 x | Avia (Top Model) |
1 x | Astra wing Joinner (Top Model) |
1 x | Linden wood slat 2.0x2.0x1000 mm |
1 x | DELPHIN Race 3.6m c64 |
1 x | BALSA triangular 10x10x1000 mm |
1 x | Control horn long w/ball |
1 x | CC 02 |
1 x | Servo SAVOX SB-2290 SG |
1 x | 6 mm M3 variable inclined horn |
1 x | Servo SAVOX SV-0236 MG HV |
2 x | Set Threaded coupler ALU M2,5 Ø 4 (2 uds) |
1 x | Servo SAVOX SV-1254 MG HiVolt Low Profile |
1 x | Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 4 mm |
1 x | Savox HV Brushless Servo SB-2270SG (Swashplate) |
2 x | Rudder forward 80x28 "type Kato" |
3 x | Long horn 50x26 |
1 x | Horn micro type4 Ø 0,5 (2 pcs) |
1 x | Horns indoor |
1 x | Indoor hinge with servo arm integraded |
1 x | Horn 20x28,5 mm (2 pcs) |
1 x | 6 mm red aluminium threaded horn with patella |
1 x | Servoarm Aluminium SH-82 |
2 x | Servoarm SH-81, two sides, aluminium |
1 x | Alu servo arm double RHINO |
1 x | Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 4 mm |
1 x | Servo JETI DSHV 3D13T (13 Kg) |
1 x | Savox Brushless Servo SB-2271SG |
2 x | Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 7 mm |
1 x | Piñones SAVOX SH-0350 |
1 x | Horn F3A de Titanium 16 mm (2 units) |
1 x | Servo RHINO pro SHV digi 4 |
1 x | Extra long horn 60x30 |
1 x | MAX BEC |
2 x | CC 03 |
3 x | Male connector JST SH 1.0mm with 10 cm wire |
1 x | Adapter 3,0 mm M8 |
1 x | Allen wheel collar M3x3 |
2 x | Hacker X-Pro USB interface V2 |
3 x | PWC4 wing/fuselage connector for 4 servos |
2 x | SPARK Switch 7.4v |
1 x | PowerBox SparkSwitch RS |
1 x | Selfstart electronic switch |
3 x | Female connector for 16 pines AWG |
3 x | wing/fuselage connector for 16 pines AWG 20-24 |
2 x | Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm) |
1 x | PSC 6 |
2 x | USB interface ALTIS |
2 x | Circlick securite |
2 x | 4 LiPo XH>EH adapter |
1 x | Interruptor RX/Batterie |
3 x | Connector Sub-D 2+5 Female |
1 x | "Y" charging 4mm wire (2 IN-1 OUT). |
1 x | Extension 5 lipos JST - JST/C |
1 x | TrainerCord (master-learner) |
1 x | PSC 5 |
2 x | Adapter 5,0 mm M8 |
1 x | Aluminium alloy coupler for carbon tube 6/M4 |
1 x | 2 mm Prop Adapter M5 |
2 x | Adapter 3,2 mm M5 for spinner 30 mm fixed propeller |
1 x | 6 mm Prop Adapter M8 |
1 x | Aluminium coupler M2,5/2 with ball bearing (1 pcs) |
1 x | Aluminun wheel collar 2 mm Ø (4 uds) |
1 x | Aluminun wheel collar 2.5 mm Ø (4 uds) |
1 x | Adapter 3,2 mm M6 |
1 x | 3 mm Long Prop Adapter M5 |
1 x | 3 mm Short Prop Adapter M5 |
1 x | Allen wheel collar M3x5 |
2 x | Adapter 3,2 mm M8 |
1 x | Adapter 4,0 mm M8 |
1 x | Black smoke bombs AX-60 (5 pcs) |
1 x | Yellow smoke bombs AX-60 (5 pcs) |
1 x | Mixers smoke bombs AX-60 (5 pcs) |
1 x | Wing tips support for AX-18/AX-60 (2 pcs) |
1 x | Ventral support for AX-18/AX-60 |
1 x | Rocket cardboard tube 50mm x 48mm x 250mm |
1 x | White smoke bombs AX-18 (5 pcs) |
1 x | Threaded coupler ALU M3 Ø 6 (2 uds) |
2 x | Threaded coupler ALU Left M2,5 Ø 3 (2 uds) |
1 x | Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch 7 m |
1 x | Rudder forward 90x28 "type Kato" |
2 x | Small control horn with bearing (2 pcs) |
2 x | Short adjustable control horn 3x24 |
1 x | Avanti S 2.3m Jet YELLOW/BLACK (SebArt) |
1 x | Pegasus 2050 mm F4J (Top Model) |
1 x | XENON RC (Aero-naut) |
1 x | Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 5 mm |
1 x | Servo SAVOX SV-1273 TG |
1 x | Aluminium tube with fibreglass case ø35x1.5mm, 1m |
2 x | CellPRO 4S Adaptader (GP/KO up to 4S) |
1 x | BLANIK 50 V2 Silver/Blue (SebArt) |
1 x | Avanti S 2.3m Jet YELLOW/BLACK & retract (SebArt) |
1 x | Avanti S 2.3m Jet WHITE/BLUE & retract (SebArt) |
1 x | Astra (Top Model) |
1 x | ASG 32 560 mm |
1 x | Straightened rod Ø 5.0 mm x 1000 mm |
1 x | Small aluminium horn red (2pcs) |
1 x | Medium extra-strong control horn with bearing 2,8x24 |
1 x | Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 5 mm |
1 x | SAVOX SH 1290 MG servo digi |
1 x | Servo SAVOX SV-1260 MG |
1 x | Rudder forward 70x28 "type Kato" |
1 x | Long adjustable aluminium control horn 2,8x24 |
1 x | Long adjustable control horn with bearing |
1 x | Duralumium F3A horn 30x10x23,5 mm (2 pcs) |
1 x | Extra-long adjustable aluminium control horn 2,8x34 |
1 x | Short extra-strong control horn with bearing 2,8x15 |
1 x | Small adjustable control horn with bearing |
1 x | Small aluminium horn blue (2pcs) |
1 x | ACTIVE ARF Electric 1.995 mm |
1 x | Sistema LDS - Ø12 mmr servos Ø 6/25 spline 60º (Futaba) pitch 6 |
1 x | Small adjustable aluminium control horn with bearing 2,8x15 |
1 x | RH long aluminium horn (2pcs) |
2 x | Threaded coupler ALU M2,5 Ø 4 (2 uds) |
1 x | Servo KST X15-1208 V8.0 13.5Kg HV |
1 x | 58 mm micro servo cover |
3 x | DPS Switch JR/JR |
1 x | FX three-position switched channel, long |
2 x | SPARK Switch 12v |
1 x | DPSI Micro MPS |
1 x | Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs) |
1 x | Battery charging cable XT60 |
2 x | EWC3 100 cm wing connector |
1 x | Female connector JST SH 1.0mm with 10 cm wire |
1 x | Male connector for 6 pines AWG |
2 x | SPARK Switch 5.9v |
2 x | JETImodel Addcap 1640 |
2 x | Double conector with JR adapter and 200 mm extension |
2 x | 120x60 mm SLH KOVO wheel |
1 x | Radial heatsink for MPJ AC25/35-xx motor |
1 x | Male connector for 20 pines AWG |
1 x | UBEC 6A KAVAN |
1 x | Cabling for Fox MDM1 wings |
2 x | Female connector for 20 pines AWG |
2 x | wing/fuselage connector for 12 pines AWG 20-24 |
2 x | PWC6 PowerWingConnector for 6 servos with fuselage socket |
2 x | Male connector for 10 pines AWG |
2 x | EWC3 40 cm wing connector |
1 x | Heat sink for Optotronix LEDs |
1 x | Battery EMCOTEC LiIon 3000 7.2v |
1 x | DPSI Micro - RCS |
2 x | Female connector for 12 pines AWG |
1 x | Short Switch On/Off micro |
2 x | Three-position switched channel, short |
2 x | Connector Sub-D 2+5 Male |
2 x | Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH |
1 x | A/C quality beech plywood 600x300x5.0 mm |
1 x | Triple rod con. 3mm Pushrod (2 pcs) |
1 x | Threaded coupler M2,5 Ø 2 mm (10 pcs) |
1 x | Brass control horn M2 long for wire (10pcs) |
1 x | Landing gear axle Ø 4 mm (2 uds) |
1 x | Locking cable tie 4.6x203 (uds) |
1 x | Adapter 5,0 mm M6 for spinner 40 mm fixed propeller |
2 x | DPSI Ampere battery backer |
1 x | wing/fuselage connector for 6 pines AWG 20-24 (without pines) |
1 x | Female connector for 10 pines AWG |
1 x | Switching module high voltage SXH |
2 x | Cable set PREMIUM, SUB-Done 4three fuselage/wing 160 cm |
1 x | Male connector for 16 pines AWG |
2 x | Male connector for 12 pines AWG |
1 x | EWC6 40 cm wing connector |
1 x | DPSI RV Mini 5 Magic |
1 x | DPSI RV Mini 6 Magic |
1 x | DPSI OCP Overload protection |
1 x | Optotronix Aurora Plug |
1 x | Heat-conducting adhesive (2x2ml), WLK DK 4 |
1 x | PowerFuel RX V2 Fuel Pump |
1 x | Wing connector 8pin with pin strip, plug & socket |
1 x | 2.3 mm Adapter for 30 mm spinners |
1 x | TP/TopFuel - XH 2/3S Adapter |
1 x | 2 LiPo XH>EH adapter |
1 x | APM2.6 Power module with 5.3V DC BEC |
1 x | Connector CAN 15 |
1 x | Micro Switch button |
1 x | USB Interface REVOLECTRIX for CellPRO 10s |
1 x | wing/fuselage connector for 3 pines AWG 20-24 |
1 x | Balsa panel 1.5x100x1000 mm |
|
19,201.56EUR |