1 x | Carbon fiber flat 1000x3.0x1.0 mm |
1 x | 6 mm hexagonal ball link M3 (10 pcs) |
1 x | Sun Cover ULTIMATUM 2.0 (Hispano Aviacion) |
1 x | Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs) |
1 x | Hobbylite Filler, Balsa colour |
1 x | Civilian pilot "Joe" size 9cm (Slimline) |
4 x | Straightened rod Ø 4.5 mm x 1000 mm |
2 x | Digital scale up to 40 kg |
1 x | 1/6 Pilot "Garry" |
1 x | Civilian pilot "Pamela" size 9cm (Slimline) |
3 x | Copier 2x20 cm pcs |
4 x | Straightened rod Ø 1.5 mm x 1000 mm |
1 x | Straightened threaded rod M3 - 1m |
1 x | Angle measurer |
3 x | Fresa corte diamante Ø 1.0mm (bola) |
2 x | SE Ring 360 mm (2 pcs) |
2 x | Dremel 3000 130W |
1 x | Sun Cover PC 21 XXL (JMB Jets) |
1 x | Pilot "Goose" (Slimline) |
2 x | Tape GFK 50 mm |
1 x | WingFix ULTRA Black Edition |
3 x | Dremel PERMAGRIT 18 mm round lime |
1 x | Piloto jet 130 mm |
1 x | Hard aluminium thin-walled tube with fibreglass case ø30x1mm, 1m |
2 x | ABS tube 5.0x3.0x1000 mm |
2 x | Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm) |
1 x | 135 mm PVC transparent battery termo-retract 68 mm (1 m) |
1 x | ABS tube 7.0x5.0x1000 mm |
1 x | ABS rectangular profile 12x6.0x1000 mm |
1 x | Carbon tube (L 1000 mm, Ø10 mm, Ø8 mm) |
1 x | 37 mm PVC transparent battery termo-retract (1 m) |
1 x | Aluminum Bayonet / strongal D12 mm / 0.5 m |
2 x | ABS angle 5,0x5,0x1000 mm |
1 x | Carbon fibre tube -TAPERED- 3k-PW (10 x 5 x 0.3) x 880 mm |
1 x | Oracover CHROME 2m |
2 x | Connector Sub-D 2+5 Male |
1 x | 105 mm PVC transparent battery termo-retract 68 mm (1 m) |
2 x | "Y" charging 4mm wire (2 IN-1 OUT). |
1 x | Aluminium tube (L 1000 mm, Ø5.0 mm, Ø4.1 mm) |
1 x | Profile ABS triangular 2.0x1000 mm 90º |
2 x | L-Connector 4.0 mm x 1000 mm |
1 x | Carbon tube (L 1000 mm, Ø2 mm, Ø1 mm) |
1 x | Monokote ROJO misil (1.8x0.65m) |
2 x | L-Connector 1.0 mm x 1000 mm |
2 x | Starter 12v (Max 90 and 15ccm) |
1 x | Antenna Cloverleaf 5.8 GHz Tx - Rx |
1 x | Ball link Aluminio M3 (2 pcs) |
1 x | Ball link Aluminio M3 (6 uds) 27x11.9x5.9 mm |
1 x | Sanyo Eneloop AA 1,2 V battery 2000 mAh |
1 x | AC-10 pre-rotacion with motor |
1 x | Sanyo Eneloop AAA 1,2 V battery 800 mAh |
1 x | Electric starter suitable for the DLE111, DLE120 and DLE85. |
2 x | Starter 12v (Max 180 and 30ccm) |
1 x | Squared carbon wing joinner 5x5x220 mm |
1 x | Hot Glue Stick RED |
1 x | PC-6 Pilatus Porter Big "Fredi" (PICHLER) |
1 x | L cockpit anchor "tipe F3A" (2 pcs) |
1 x | Oils Pumps Empty (1 liter) |
1 x | Ball link Aluminio M3 x 3 x 5 x 18mm (6 uds) |
3 x | Ball Link Plier |
1 x | Z Bender - S Type Tool |
1 x | Carbon tube (L 1000 mm, Ø16 mm, Ø12 mm) |
1 x | Contest-S-Pult-Carbon mc-20/mc-24 |
1 x | 1/6 Pilot "Buddy" |
2 x | Ring 320 mm length (5 pcs) |
1 x | 26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
1 x | 14x60 mm Mini rings Tie Wraps (4 pcs) |
1 x | 13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
1 x | Sub-D Plug Mold |
1 x | Starter Sullivan-STAR 603 DINATRON |
1 x | SE Ring 300 mm (2 pcs) |
1 x | Sealing Iron Profi LCD |
1 x | 20x200 mm battery rings |
2 x | Aluminium rod Ø 4.0 mm x 3000 mm |
1 x | XT-60 Plug Mold |
2 x | Vinyl Gloves IDEAL LIGHT, size M , box/ 100 pcs |
3 x | Brass rod Ø 0.8 mm x 1000 mm |
1 x | Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs) |
1 x | Spikes Band (5 m) |
1 x | Straightened rod Ø 2.5 mm x 1000 mm |
1 x | CC 03 |
1 x | Bec MR UBEC 5A (5v/6v/7v) |
1 x | APM2.6 Power module with 5.3V DC BEC |
1 x | Circlick securite |
1 x | Profile ABS Square 2 x 1000 mm |
1 x | Streamline Stainless Steel Tubing 7.5x4.5x1000 mm |
1 x | Profile ABS Square 4 x 1000 mm |
1 x | Piloto Jet "Green" 1/6 Scale |
1 x | Aluminium tube (L 1000 mm, Ø4.0 mm, Ø3.1 mm) |
1 x | Pilot "Adolf" Legends Series (Slimline) |
2 x | Brass hexagonal rod Ø 5 mm x 1000 mm |
3 x | Straightened rod Ø 1.0 mm x 1000 mm |
1 x | Universal Filter |
4 x | Straightened rod Ø 5.5 mm x 1000 mm |
1 x | Waterproof adhesive tape, width 19mm, length 25m |
2 x | Straightened rod Ø 7.0 mm x 1000 mm |
2 x | Set fresas corte Vanadium Ø 2.3/2.35 mm (3 pcs) |
1 x | 5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
1 x | Screwdriver for Torx® TX8 |
3 x | Straightened rod Ø 2.0 mm x 1000 mm |
1 x | 20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
2 x | Straightened rod Ø 14.0 mm x 1000 mm |
1 x | Spare round blades, 28 mm, pack/ 2 pcs. |
1 x | Antenna holder bracket double |
1 x | Cinta Goldfix 1m |
1 x | SE Ring 200 mm (2 pcs) |
2 x | Starter EM Gear Power 80 |
2 x | 10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
1 x | Wooden mouth spatulas (150 x 18 x 1.5 mm), 100 pcs |
3 x | Straightened rod Ø 5.0 mm x 1000 mm |
4 x | Straightened threaded rod M2-1m |
1 x | Straightened rod Ø 8.0 mm x 1000 mm |
1 x | T-Motor U7-V2.0 Kv420 |
1 x | Tool for entel |
3 x | Brass hexagonal rod Ø 3 mm x 1000 mm |
4 x | Straightened rod Ø 6.0 mm x 1000 mm |
1 x | Tape GFK 25 mm |
1 x | Vacuum pump P1-N |
1 x | Foil for sticking flaps and ailerons |
1 x | Steel brush wheel with 2.35mm |
1 x | SE Ring HACKER 300 mm (2 pcs) |
1 x | Tachometer Hyperion Multi-pala |
1 x | 13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
3 x | Brass rod Ø 1.0 mm x 1000 mm |
2 x | Brass hexagonal rod Ø 3.5 mm x 1000 mm |
2 x | Black 2,4 GHz antenna exit guides (2 pcs) |
2 x | Brass rod Ø 0.5 mm x 1000 mm |
2 x | Tube bender |
1 x | Tachometer HANGAR 9 digital |
1 x | Straightened rod Ø 1.2 mm x 1500 mm |
2 x | Straightened rod Ø 1.5 mm x 1500 mm |
1 x | Starter EM Gear Power 250 |
1 x | Soldering tip for KAVAN soldering iron KAV66.8338 |
2 x | Straightened rod Ø 0.5 mm x 1000 mm |
1 x | silverlot 45% - 1,50x500 mm solder rods (2 pcs) |
1 x | Set brocas Ø 0.4-0.6-0.8-1.0 mm (4 pcs) |
3 x | Straightened rod Ø 0.8 mm x 1000 mm |
1 x | Smart Soldering Iron 110W/230V AC |
2 x | Straightened rod Ø 3.0 mm x 1000 mm |
1 x | Straightened rod Ø 4.0 mm x 1000 mm |
1 x | Vacuum pump 12 CFM |
1 x | SE Ring 250 mm (2 pcs) |
1 x | |
1 x | Pad self adhesive, up to 3mm / 0.12″, (10 pcs) |
1 x | Z Bender - S Type Tool |
2 x | Sealing Iron STANDARD |
1 x | Vacuum Connection VA 1 (for hose Ø 6 mm) |
1 x | Set brocas Ø 1.2-1.4-1.6-1.8 mm (4 pcs) |
1 x | Sealing Iron Sleeve STD |
1 x | Set fresas corte Vanadium Ø 2.3/2.35 mm (3 pcs) |
1 x | Tool for entel |
1 x | Set brocas Ø 1.5-2.0-2.5-3.0 mm (4 pcs) |
1 x | SE Ring 330 mm (4 pcs) |
1 x | Set fresas corte acero-carburo Ø 0.5/1.8 mm (2 pcs) |
3 x | Sealing Iron Sleeve PROF |
1 x | T-Motor MN705-S Kv125 (pack 2 uds) |
1 x | CC 05 |
1 x | CC 01 |
1 x | Black copper lacquer wire Ø0,2 mm (5 m) |
2 x | TP/TopFuel - XH 2/3S Adapter |
2 x | JETImodel SINGLE BEC |
1 x | 5 LiPo XH>EH adapter |
2 x | TP/TopFuel - JST-EH 4/5S Adapter |
1 x | 2 LiPo XH>EH adapter |
2 x | Adapter lead MPX/EC3 |
1 x | 20x1000 mm Ring Strap Back To Back |
2 x | Cabel charger transmitter GRAUPNER |
1 x | Futaba External voltage input cable Futaba CA-RVIN-700 |
1 x | TrainerCord (master-learner) |
1 x | CellPRO 4S Adaptader (GP/KO up to 4S) |
1 x | Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH |
1 x | 4 LiPo XH>EH adapter |
1 x | MPX-Dean "T" Adapter |
2 x | Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH |
2 x | Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm) |
1 x | BEC 3A FOXY |
1 x | Dean "T" - Futaba Adapter |
2 x | DUPLEX USBa USB-Adapter for Jeti Duplex Items |
2 x | Balanceradapter JST-XH (Heli 47G) 2-6 c. |
2 x | Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm) |
1 x | ABS "T" angle 6.0x6.0x1000 mm |
1 x | Streamline Stainless Steel Tubing 6.3x3.5x1000 mm |
1 x | ABS "T" angle 4.0x4.0x1000 mm |
1 x | Profile ABS Square 3 x 1000 mm |
1 x | Streamline Stainless Steel Tubing 15.5x8.5x1000 mm |
2 x | U Profile ABS 8,0x4,0x1000 mm |
1 x | ABS tube 9.0x8.0x1000 mm |
1 x | ABS tube 8.0x7.0x1000 mm |
1 x | Aluminium tube (L 1000 mm, Ø3.0 mm, Ø2.1 mm) |
1 x | ABS tube 6.0x4.0x1000 mm |
1 x | Aluminium tube (L 1000 mm, Ø7.0 mm, Ø6.1 mm) |
1 x | Cable video GoPro and 5V cable |
1 x | 63 mm INO spinner (carbon imitation) |
1 x | Spinner 140 mm GFK |
1 x | Carburator Moki S 180 |
1 x | 25 mm carbon servo arm |
1 x | Sparkplug ROSSI R8 |
1 x | 64 mm aluminium spinner |
1 x | Connectors MPX female |
1 x | BULLIT Wing 840 mm |
1 x | DOMINO 46-55 Trainer 1583 mm |
1 x | Socket Screw M3x9 mm |
1 x | Nylon hinge 20x20x0,3 (10 pcs) |
1 x | MR30 connector male |
1 x | 19x8 BIELA propeller |
1 x | 18x8 BIELA propeller |
1 x | PPM Encoder Module |
1 x | Aluminum Fold Prop Spinner 38 mm / 5 mm |
1 x | Propeller MEJLIK 28.5x12 S-3 Blades |
1 x | Spinner 115 mm GFK |
1 x | Spinner 105 mm CFK |
1 x | Connectors DEANS (T) |
1 x | Smoke pump RCEXL |
1 x | MR30 connector female |
1 x | Connectors MPX male |
1 x | 89 mm aluminium spinner. |
1 x | Gates hinge aluminium (1 pcs) |
1 x | 45 mm aluminium spinner. |
1 x | Extension Arm for Carburetor (red) |
1 x | 67 mm cylidric hinge Ø 4,5 mm (5 pcs) |
1 x | Electric Fuel pump |
1 x | Extension 7.5 cm |
1 x | BALSA trip 5.0x5.0x1000 mm |
1 x | Mahogany wood slat 2.0x2.0x1000 mm |
1 x | Horn 16,5x20 mm (2 pcs) |
1 x | Linden wood slat 3.0x3.0x1000 mm |
1 x | 22x10 prop Super Silence |
1 x | 3-blades 20x10 carbon prop Super Silence |
1 x | 24x10 4Bl Scale |
1 x | Charger LiPo Charger4 |
1 x | Flap hinge (6 pcs) |
1 x | AddCAP 10AS capacitors |
2 x | Spinner fixed propeller 60 mm / 5,0 mm |
1 x | DUPLEX 2.4EX MU 3 Sensor |
2 x | POLARON EX 800w charger |
2 x | Receiver GRAUPNER GR-16 HoTT |
1 x | 290 mm 290 mm M5x18 mm shaft ship |
1 x | Rigid coupling brass Ø 3.0 / 2.3 mm L: 20 mm |
1 x | Propeller RABOESCH M4 45 mm (3 Blades pr) (Right) |
1 x | Receiver Crystal 35 Mc/s Ch 62 |
1 x | Hard brass tubing (L 1000 mm, Ø6.0 mm, Ø5.2 mm) |
1 x | DUBRO - CUB WHEELS (1/3 SCALE) (558TLC) - 2PCS |
1 x | Propeller hub spacer 8/5.5 |
1 x | Wheel Scale 1/4 Vintage 178 mm / 7" (1 par) |
1 x | SERVO DES 806 Pignons |
2 x | MZ-10, 5 Channel HoTT |
2 x | Copier 5x20 cm pcs |
1 x | Dean-T Plug Mold |
1 x | KIRA 500-26 6,7:1 |
1 x | Kontronik Kosmik 30 cm Cable Kit |
1 x | KIRA 600-22 6,7:1 |
1 x | 1/6 Pilot "John" |
1 x | PROXXON - TRIANGLE / DELTA SANDING MACHINE OZI/E |
2 x | Dremel PERMAGRIT thin lime |
2 x | Digital precision scale up to 2000 g |
2 x | 3,0x60 mm allen screwdriver |
3 x | Extra Hard Titanium Herxagon Screwdrivers |
1 x | Receptor DUPLEX REX R9 Slim Assit |
1 x | PERMAGRIT Sanding Block 45° 140x51 mm |
1 x | DUPLEX R7 receiver nano 2,4 GHz |
3 x | 1,5x50 mm allen screwdriver |
1 x | Receiver DUPLEX R9 EX 2.4 GHz |
1 x | Male connector for 10 pines AWG |
1 x | CM-3 |
1 x | Copper lacquer wire Ø0,2 mm (5 m) |
1 x | Adapter lead MPX/XT60 |
1 x | 40,0 mm hydro-propeller (left hydropropeller) |
1 x | Servo Arm aluminium ALU-STAR |
1 x | Quick hose connector 6-4 mm |
1 x | Pitot tube JETI MSpeed DUPLEX |
1 x | Flat Connector 4.0 mm x 1000 mm |
1 x | Rigid coupling brass Ø 4.0 / 2.3 mm L: 20 mm |
1 x | Propeller RABOESCH M4 40 mm (3 Blades) (Right hydropropeller) |
1 x | U Profile ABS 3,0x6,0x1000 mm |
1 x | 290 mm M4 7/8x212 mm shaft ship |
1 x | DUBRO - 102MM / 4" DIA BIG WHEELS (400RV) - 2PCS |
2 x | Propeller Pleg CAM-Prop 10x6 + Spinner |
1 x | Soporte metal para servos |
1 x | Receiver GRAUPNER GR-12 HoTT |
2 x | Manometer 4 mm |
1 x | SUPER STRANGTH SERVO ARMS FUTABA LONG (8 PCS) |
1 x | Combustible Glow "KAVAN" air/heli 5% nitro |
1 x | Crimping tool |
1 x | XT60 Connector with Holder Male 2pcs |
1 x | PYRO 600-11 |
1 x | Futaba R3006SB T-FHSS 2.4GHz |
1 x | PROXXON - SANDING BELTS FOR BSL 220/E 180 GRIT (5 pcs) |
1 x | Ciano KAVAN Medium 20g |
1 x | Ciano KAVAN Thin 20g |
1 x | DRIVE 510 (KIRA 480-34 5,2:1 + Koby 55 LV) |
1 x | Antena FUTABA receptor Standard 2.4 GHz ( 160 mm aprox.) |
1 x | Fabric scissors curved Premium, 16 cm / 6" length |
1 x | DUPLEX R7 REX receiver 2,4GHz A40 |
1 x | DUPLEX R6G indoor receiver 2,4GHz |
1 x | Ball Link Plier |
1 x | DUPLEX R14 receiver 2,4GHz |
1 x | Rubber Insert soft, 1 Pcs. |
1 x | Screwdriver for Torx® TX6 |
1 x | Sandpaper file 13 mm |
1 x | DPS Switch JR/JR |
1 x | Female connector for 20 pines AWG |
1 x | SPARK Switch 7.4v |
1 x | Male connector for 12 pines AWG |
1 x | 3 LiPo XH>EH adapter |
1 x | FesEx-Uni8 System |
1 x | Battery LiFe TopFuel 3100 mAh 3s MTAG 30C |
1 x | Red copper lacquer wire Ø0,2 mm (5 m) |
1 x | Axi for motor A40-L Motor 8-Pole-Electric Turbine |
1 x | Battery charging cable XT60 |
1 x | Beech dowels 2.0 x 1000 mm |
1 x | DUPLEX 2.4EX MT 125 temperature sensor |
1 x | DUPLEX 2.4GHz GPS |
1 x | Sensor DUPLEX 2.4EX MUI 200 |
1 x | MRPM-AC revolution sensor |
1 x | Presto SF Light Filler styrene-free (420 g) |
1 x | DUPLEX 2.4EX MUI 75 |
1 x | Sensor DUPLEX 2.4EX MUI 200 MULi 6S for measuring voltage on LiX |
1 x | Receiver replacement antenna, approx. 15 |
1 x | Transmitter Crystal 35 Mc/s Ch 62 |
1 x | Aluminium sheet 500x250x0,5mm |
1 x | DUPLEX 2.4EX RC Switch |
2 x | MZ-18, 9 Channel HoTT |
2 x | Spinner fixed propeller 42 mm / 5,0 mm |
1 x | VARIO module Hott |
1 x | Receptor GRAUPNER GR-24 HoTT |
1 x | Propeller RABOESCH M4 30 mm (3 Blades) (Left hydropropeller) |
1 x | Hard brass tubing (L 1000 mm, Ø4.0 mm, Ø3.1 mm) |
1 x | 270 mm 3/3 mm shaft ship |
1 x | Spare Shaft Ø4mm L:450x23mm M4 |
1 x | 290x4 mm M4 shaft ship |
1 x | 290 mm M5 Prop shaft |
1 x | Towing hook |
1 x | Rigid coupling brass Ø 3 mm L: 20 mm |
1 x | Mini Infrared Thermomiter |
1 x | Hose clips 6 mm |
1 x | SC NAVY V15R |
1 x | SERVO DES 806 Pignons |
1 x | Hard brass tubing (L 1000 mm, Ø11.0 mm, Ø10.0 mm) |
1 x | NoNa BB wheel Ø175x55mm in pair |
1 x | Servo HBS 690BB HV Digital |
1 x | Tygon DUBRO Medium 15m |
1 x | Hard brass tubing (L 1000 mm, Ø8.0 mm, Ø7.1 m) |
2 x | DUBRO - KWIK TWIST TOOL - TO TWIST STEEL WIRE (1 PC) (301) |
1 x | SERVO DES 568 MG |
1 x | Propeller G-Sonic 20x8 |
1 x | DUBRO - BOLTON PRESSURE FITTING 6-32 (1 PC) |
1 x | Propeller Pleg CAM-Prop 8x6 |
1 x | Dubro Fuel Tank Cap/Fittings 2-24oz Tanks Gas |
1 x | Receiver replacement antenna, approx. 85 |
1 x | Deposito DUBRO 3000cc-100oz |
1 x | SERVO DES 588 BB MG |
1 x | MZ-12, 6 Channel HoTT |
1 x | Wheel Scale 1/3 Vintage 240 mm / 9.33" (1 par) |
1 x | SERVO DES 707 BB MG |
1 x | SERVO DES 658 BB MG |
1 x | Hard brass tubing (L 1000 mm, Ø18.0 mm, Ø16.0 mm) |
1 x | |
1 x | KIRA 500-30 6,7:1 |
1 x | PROXXON - SANDING BELTS FOR BSL 220/E 80 GRIT (5 pcs) |
1 x | Receiver FUTABA R6004 FF FAST |
1 x | Receiver FUTABA R7108SB FASSTest/FASST |
3 x | Dust collector for mould cleaning |
1 x | OSD Telemetry sensor |
1 x | Electric Fuel Pump 12v |
1 x | KIRA 500-36 6,7:1 |
1 x | Adapter SPEED 480 whit axle short |
1 x | Receptor FUTABA R7208SB FASSTest SBus2 |
1 x | Adapter SPEED 500/600 |
1 x | KIRA 600-24 6,7:1 |
1 x | Futaba R7114SB 2.4GHz FASTT/FASSTest S.BUS Receiver |
1 x | Ciano KAVAN Thick 20g |
2 x | |
1 x | BETA 1400 ARF Red |
1 x | R617 FS 2,4 GHz receiver |
1 x | KIRA 600-38 6,7:1 |
1 x | KIRA 600-20 6,7:1 |
1 x | Combustible Glow "KAVAN" air/heli 15% nitro |
1 x | |
1 x | KONDOR 15-92 |
1 x | Bungee HLG Premium |
2 x | 2,0x50 mm allen screwdriver |
1 x | MAMBO 17 |
1 x | KIRA 480-43 |
1 x | Adaptadores carga 6s JST-XH |
1 x | Crimping tool |
1 x | Starter Sullivan-STAR 601 |
1 x | Screwdriver for Hexagon 1,5mm |
1 x | Receiver DUPLEX R4H EX 2.4 GHz |
1 x | Digital weight, angle and balance meter BASIC |
1 x | Rubber Insert hard, 1 Pcs. |
1 x | JETImodel Addcap 820 |
1 x | |
1 x | Fresa corte diamante Ø 2.35mm (flame) |
1 x | Aramid fibre shears Proton®, 21 cm / 8" length |
1 x | DUPLEX R12 receiver REX Assist |
1 x | 25 mm Sandpaper file |
1 x | Receiver DUPLEX REX 3 A20 2.4 GHz |
1 x | PROXXON - SAW BLADE 8MM 0ZI220E |
1 x | Fresa corte diamante Ø 2.35mm (lentil) |
1 x | 22 mm Cut Disc Proxxon/Dremmel |
1 x | DUPLEX R7 receiver REX Assist |
1 x | 2,5x60 mm allen screwdriver |
1 x | DUPLEX R7 REX receiver 2,4GHz |
1 x | Fabric scissors curved (offset handles), 16 cm / 6" length |
1 x | Heli digital angle measurer |
1 x | Concave-Convex sandpaper file 13 mm |
1 x | DPSI Ampere battery backer |
1 x | Female connector for 12 pines AWG |
1 x | FX three-position switched channel, long |
1 x | Female connector for 16 pines AWG |
1 x | Micro Switch button |
1 x | wing/fuselage connector for 16 pines AWG 20-24 |
1 x | SPARK Switch 12v |
2 x | JETImodel Addcap 1640 |
1 x | wing/fuselage connector for 3 pines AWG 20-24 |
1 x | PWC4 wing/fuselage connector for 4 servos |
1 x | EWC3 100 cm wing connector |
1 x | Connector Sub-D 2+5 Female |
1 x | Hacker X-Pro USB interface V2 |
1 x | EWC6 40 cm wing connector |
1 x | Connector CAN 15 |
1 x | Female connector JST SH 1.0mm with 10 cm wire |
1 x | Male connector for 6 pines AWG |
1 x | Male connector for 20 pines AWG |
1 x | Connectors banna oro 8,0 mm (Male) 5 pcs. |
1 x | Axle for motor A20-S (3 uds) |
1 x | 30 cm BEC cable (female) |
1 x | Shaft for A60-L V4 |
1 x | Propadapter for motor A50 |
1 x | Disipador para motor Hacker B 20 (or motors up to Ø20 mm) |
1 x | Axle for motor A30-XL V2 |
1 x | Battery LiFe TopFuel 3100 mAh 4s MTAG 30C |
|
22,970.85EUR |