2 x | Carbon fiber flat 1000x3.0x0.13 mm |
1 x | Carbon fiber rod 1.5 mm x 1000 mm |
2 x | Carbon fiber flat 1000x3.0x1.0 mm |
1 x | Squared carbon wing joinner 5x5x220 mm |
1 x | Carbon fiber rod 4.0 mmx1000 mm |
2 x | Carbon fiber rod 0.5 mmx1000 mm |
2 x | Carbon fiber flat 1000x6.0x0.8 mm |
1 x | Carbon fiber rod 3.0 mm x 1000 mm |
1 x | Carbon fiber rod 8.0 mmx1000 mm |
1 x | Carbon fiber rod 2.0 mmx1000 mm |
1 x | Carbon fiber rod 2.5 mmx1000 mm |
1 x | Carbon wing joinner 13,4 mm Ø 0,48 mm |
1 x | Carbon fiber flat 1000x3.0x0.5 mm |
1 x | Carbon fiber rod 14 mmx1000 mm |
1 x | Carbon fiber rod 7.0 mmx1000 mm |
2 x | Carbon rectangular rod 3.0 mm x 1.0 x 1000 mm |
3 x | Cierre cabina aluminio Ø4, I=10 mm |
1 x | Covered closure or fairings |
2 x | Canopy Lock V1 M3 Blue (2 pcs) |
2 x | Cabin latch Fox MDM1 4m (pair) |
1 x | Locking cable tie 4.6x203 (uds) |
2 x | Stainless steel cable Ø 0.5 mm (20 m) |
1 x | L cockpit anchor "tipe F3A" (2 pcs) |
2 x | Screw-lock connector M2 (2 uds) |
1 x | Electric spoiler 250 mm (2 pcs) |
2 x | Horizontal cockpit anchor "tipe F3A" (2 pcs) |
1 x | Softshell Hispano Aviación |
1 x | Cap Hispano Aviación |
2 x | Stainless steel cable Ø 0.52 mm - 15 kp (10 m) |
1 x | Cierre cabina aluminio Ø5, I=16 mm |
1 x | SUS wire 3m (nylon coated) |
3 x | Crimping sleeves for cable 1.3 mm (10 pcs) |
1 x | Micro screw-lock pushrod conn snap Ø 1 mm (2 uds) |
1 x | Steering arm 16 mm Ø 4 mm (2 uds) |
1 x | Steering arm 12 mm Ø 4 mm |
3 x | Cap closure 33/23.5mm (2 uds) |
1 x | Stainless steel cable Ø 0.62 mm (10 m) |
1 x | Locking cable tie 2.5x100 (uds) |
1 x | Stainless steel cable Ø 0.5 mm (10 m) |
3 x | Vest clothes Hispano Aviación |
2 x | Canopy Latch |
3 x | Steering arm 16 mm Ø 3 mm |
3 x | Crimping sleeves for cable 0.70 mm (10 pcs) |
1 x | Locking cable tie 3.2x142 (uds) |
2 x | One touch canopy lock |
2 x | Stainless steel cable Ø 0.5 mm (2 m) |
1 x | 2000A 12V Lithium Jump Starter with 150PSI Air inflator |
1 x | |
1 x | Carbon fiber rod 6.0 mmx1000 mm |
1 x | Carbon fiber rod 1.5 mm x 1000 mm |
1 x | Carbon fiber flat 1000x3.0x1.0 mm |
1 x | Carbon fiber rod 10 mm x 1000 mm |
1 x | Carbon fiber rod 0.8 mmx1000 mm |
1 x | Optical RPM Sensor |
1 x | Motor A2212/13T |
1 x | SERVO HOLDER |
1 x | Xplorer3 anemometro |
1 x | T-Connector 4.0 mm x 1000 mm |
1 x | Profile ABS half cane 2.0x1000 mm |
1 x | Liston HAYA 3 x 10 x 1000 mm |
1 x | TeXtreme® Carbon tape 38 g/m² (IM, unidirectional) 20 mm x 100m |
1 x | Straightened rod Ø 0.8 mm x 1000 mm |
1 x | Horn 5/20 with M2 Bearing |
1 x | Straightened rod Ø 1.2 mm x 1500 mm |
1 x | Fully Threaded Steel Rod Duralumin 80 mm M3 (2 pcs) |
1 x | Soporte grifo FESTO (2 pcs) |
1 x | Carbon fiber rod 0.5 mmx1000 mm |
1 x | Soporte filtro FESTO (4 pcs) |
3 x | Fully Threaded Steel Rod alumin 40 mm M2,5 (2 pcs) |
3 x | Tray for FUTABA 18 SZ |
2 x | Transmitter Balancer SPK DX-8 |
2 x | Fully Threaded Steel Rod alumin 30 mm M2,5 (2 pcs) |
3 x | Fully Threaded Steel Rod alumin 60 mm M2,5 (2 pcs) |
2 x | Pushrod octagone 3/2 with coupler M2 |
2 x | Pushrod octagone 3/2 |
2 x | Fully Threaded Steel Rod alumin 70 mm M3 (2 pcs) |
2 x | Fully Threaded Steel Rod Duralumin 90 mm M3 (2 pcs) |
2 x | Switch moment button, 2 functions, long FUTABA |
1 x | Decorative caps, multicoloured, short |
1 x | Cable grommet 9.5 mm (4 uds) |
4 x | Tip wing protector 28x10x12 (2 pcs) |
2 x | Allen wheel collar M3x3 |
3 x | Aluminun wheel collar 3 mm Ø (4 uds) |
1 x | Steering arm 16 mm Ø 3 mm (2 uds) |
2 x | 11 mm Rubber pads (14 pcs) |
1 x | Cable grommet Ø 3.2 mm (4 uds) |
3 x | Stainless steel cable Ø 1.3 mm (10 m) |
2 x | Screw-lock pushrod conn snap Ø 1.5 mm (2 uds) |
1 x | Militarian pilot "Kamikaze" size 9cm (Slimline) |
1 x | 1/12 Pilot "Langley" |
1 x | Militarian pilot "Fly Boy" size 9cm (Slimline) |
1 x | Civilian pilot "Gramps" size 9cm (Slimline) |
1 x | 1/6 Pilot "Cindy" |
1 x | Transmitter Stick Ends V1 Blue - M3 (2 pcs) |
1 x | SWTU2 switch |
1 x | Crimping sleeves for cable 0.85 mm (10 pcs) |
1 x | Three-function control switch by FUTABA |
1 x | Fully Threaded Steel Rod Duralumin 100 mm M3 (2 pcs) |
2 x | Fully Threaded Steel Rod alumin 100 mm M3 (2 pcs) |
2 x | TX-Tray V1 (L) (Black) |
2 x | Connectors MPX female |
2 x | 45 mm rods + T patellas set for direction control |
3 x | Canopy Lock V1 M3 Red (2 pcs) |
1 x | 140 mm rods set for direction control |
1 x | Triple rod con. 2mm Pushrod (2 pcs) |
2 x | Tray for FUTABA 14SG/16SZ |
1 x | Receiver bed (Blue) |
1 x | Fully Threaded Steel Rod alumin 50 mm M3 (2 pcs) |
1 x | Transmitter Balancer HITEC Aurora 9, JR and Spectrum (blue) |
1 x | Transmitter Stick Ends V5 Rojo - M3 Futaba/Hitec/Spektrum DX8 (2 |
1 x | Cockpit aluminium closing 5.4g |
3 x | Fully Threaded Steel Rod alumin 40 mm M3 (2 pcs) |
1 x | Cockpit aluminium closing 4.7g |
1 x | Transmitter Stick Ends V2 Red - M3 (2 pcs) |
1 x | Fully Threaded Steel Rod alumin 90 mm M3 (2 pcs) |
1 x | Fully Threaded Steel Rod alumin 70 mm M3 (2 pcs) knurled |
1 x | Transmitter Crystal 35 Mc/s Ch 62 |
2 x | Switch Cap L (black) |
1 x | TX-Tray V1 (L) (Red) |
1 x | Switch Cap L (Blue) |
1 x | Switch Cap M (black) |
1 x | Switch Cap L (Red) |
1 x | Three-function control switch by FUTABA |
3 x | Cockpit latch closing I=10 mm |
1 x | Transmitter Stick Ends V1 Red - M3 (2 pcs) |
1 x | Transmitter Stick Ends V5 Red - M4 JR/DX7 |
2 x | Fully Threaded Steel Rod Duralumin 110 mm M3 (2 pcs) |
1 x | Teacher-student connector T12FG/FX-30 |
2 x | Transmitter Stick Ends V5 Blue - M4 JR/DX7 |
1 x | Cockpit metalic closing |
1 x | Transmitter Stick Ends V4 Blue- M3 (2 pcs) |
1 x | Fully Threaded Steel Rod alumin 80 mm M3 (2 pcs) |
1 x | Transmitter Balancer Futaba FF9-DX7-JR-Hitec |
1 x | Fully Threaded Steel Rod alumin 90 mm M2,5 (2 pcs) |
2 x | Fully Threaded Steel Rod alumin 70 mm M2,5 (2 pcs) |
3 x | Cockpit plastic closing |
1 x | Cockpit aluminium closing |
1 x | Vertical cockpit anchor "tipe F3A" (2 pcs) |
1 x | 100 mm rods + T patellas set for direction control |
1 x | Fully Threaded Steel Rod Duralumin 130 mm M3 (2 pcs) |
2 x | Fully Threaded Steel Rod alumin 80 mm M3 (2 pcs) |
1 x | M2-250 mm Carbon Fiber Adjustable Push Rod Sets (2 pcs) |
3 x | Window mounting channel 5m |
2 x | Wing bolts M3 Steel screw Red (2 pcs) |
1 x | Wheel collar 3 mm Ø (4 uds) |
2 x | Wheel collar 5 mm Ø (4 uds) |
1 x | Black 2,4 GHz antenna exit guides (2 pcs) |
1 x | Servo NARO Max Std |
3 x | Tray FUTABA T6K,T10J,T12K,T14SG,T16iZ,T18SZ,T18MZ,T32MZ |
1 x | FESTO Filter 6 mm |
1 x | FESTO connector M7 Quick 4mm 90º |
1 x | Quick hose connector 6-6 mm |
1 x | Quick hose connector 4-4 mm |
1 x | Festo Adaptor Tygon Large/4mm |
1 x | FESTO connector M7 barb fitting 4mm |
1 x | Quick hose connector 6-6 mm |
1 x | 2,3 mm Prop Adapter M6 |
1 x | ARAMID honeycomb 1300x2600x2 mm |
1 x | FESTO Filter 4 mm |
1 x | Antena FUTABA 35 mhZ 3PM/3FRF/4V/4Y/6EX/6X/6Y/7C |
2 x | Charger HITEC CG-42 TX 7.2v/ RX 4.8v (80 mA) |
1 x | DUPLEX 2.4EX MULi 6s M |
2 x | Futaba Radio Case |
1 x | Decorative caps, multicoloured |
1 x | Servo SAVOX SV-0236 MG HV |
1 x | ALU servo arm 90º 3 mm shaft |
1 x | Servo SAVOX SH 0257 MG |
1 x | Fully Threaded Steel Rod alumin 60 mm M3 (2 pcs) knurled |
1 x | Servo FUTABA S 9670 SV |
1 x | Hitec 30 mm servo rounded arm |
1 x | Brazo servo MKS Metal M3-L:30 (2 pcs) |
1 x | Servo FUTABA HPS-A700 Digital S-Bus |
1 x | Professional Servo tester |
1 x | Futaba 20 mm servo arm |
1 x | 17 mm servo arm with ball link DES Graupner |
1 x | Futaba S-Bus Rx/Gyro Link Lead |
1 x | Wing bolts M3 Steel screw blue (2 pcs) |
1 x | STEERING FRONT WHEEL SYSTEM BIDULE 55 |
1 x | FPV Station for SE TX-Tray V1 |
1 x | Steering arm 16 mm Ø 4 mm |
1 x | Wheel collar 6 mm Ø (4 uds) |
1 x | DUPLEX 2,4EX Stick with 3-Position Switch for Transmitter DC/DS |
2 x | Fully Threaded Steel Rod Duralumin 34 mm M3 (2 pcs) |
1 x | DUPLEX 2.4EX MU 3 Sensor |
1 x | Battery RX JETI LiIon RB 2600 7.2v |
1 x | DUPLEX 2.4EX RC Power Switch 10 |
1 x | Caps multicolor Switch JETI |
1 x | Transmitter Balancer Futaba V |
1 x | Landing gear frontal support 25x32x16 |
1 x | 89 mm double servo arm with bearing (2 pcs) |
1 x | Servo SAVOX SA-1258 TG |
1 x | Servo FUTABA BLS 272SV |
1 x | 46 mm Futaba servo arm tandem with ball link |
1 x | Futaba 38 mm servo arm |
1 x | HPP-21 PLUS PC Programmer for Hitec Digital Servos |
1 x | 54 mm Futaba servo arm tandem with ball link |
1 x | Hitec 20 mm servo arm |
1 x | Servo Metal Horn 15.5 mm MKS |
1 x | Brazo Servo XTorque 52 mm HITEC 25T-6 |
1 x | Swashplate metal LAMA |
1 x | L-shaped servo mount |
1 x | Tip wing protector 40x14 (2 pcs) |
1 x | Wheel collar 4 mm Ø (4 uds) |
2 x | Futaba Neckstrap |
1 x | Adap/Exten for Futaba 12-14C |
1 x | DUPLEX 2.4EX Central Box 220 + 2x Rsat2 |
1 x | DUPLEX 2,4EX Switch SAFETY 2-Position Safety DC-16/14 |
1 x | DUPLEX 2.4EX Central Box 210 |
1 x | DUPLEX 2,4EX Brackets for Transmitter DC/DS |
1 x | 6 mm ball link M3 (10 pcs) |
1 x | DUPLEX 2.4EX MSpeed PITOT <300 Km/h |
1 x | DUPLEX 2.4EX MT 300 EX |
1 x | DUPLEX 2.4EX MUI 150 Sensor |
1 x | DUPLEX 2.4 EX MVario2 |
1 x | DUPLEX 2.4EX MT 125 temperature sensor |
1 x | DUPLEX 2.4EX Expander E2 |
2 x | Fully Threaded Steel Rod alumin 90 mm M3 (2 pcs) knurled |
1 x | DUPLEX 2.4EX Central Box 220 + 2x Rsat2 + RC Switch |
1 x | Fully Threaded Steel Rod alumin 30 mm M3 (2 pcs) |
1 x | DUPLEX 2.4EX Satellite receiver Rsat 2 |
1 x | DSM 10 Dual Switch Mixer |
1 x | Switch Cap L (silver) |
1 x | Split pin 1.6x16 mm (10 uds) |
1 x | Pushrod octagone 4/3 with coupler M3 |
1 x | Pushrod greyline 4/3 with coupler M3 |
1 x | MULTIPLEX ALUMINUM CASE "M-LINK" |
1 x | Aluminun wheel collar 4 mm Ø (4 uds) |
1 x | Receiver Crystal 35 Mc/s Ch 62 |
1 x | Pushrod octagone 4/3 |
2 x | Pushrod greyline 3/2 with coupler M2 L: 1000 mm |
1 x | Snap long M2 (10 uds) |
1 x | Fully Threaded Steel Rod M3 |
1 x | Transmitter Balancer Futaba T-10CG |
2 x | Aluminun wheel collar 2 mm Ø (4 uds) |
1 x | Wheel collar 2 mm Ø (4 uds) |
1 x | Futaba S-Bus Rx/Gyro Link Lead |
1 x | Brazo servo KAVAN doble aluminio 25T - 2.5" M3 |
1 x | 57 mm micro-mini servo cover |
1 x | Servo GO-1035MG 16 kg.cm 0.08s/60º |
1 x | SAVOX SH 0255 MG servo |
1 x | Piñones SAVOX SH-0350 |
1 x | Brazo servo aluminio 1.25/1.5" Futaba/MKS/Savox |
1 x | Servo GO-1053MG 20 kg.cm 0.17s/60º |
1 x | Servo GO-1013 MG 3.8kg |
1 x | Servo GO-1280 MG 40 kg.cm 0.085s/60º |
1 x | Soporte servo KST X08/H and Plus |
1 x | Soporte servo KST X10 mini / DS135MG |
1 x | Gear for MICRO BB |
1 x | 50 mm servo arm with bearing (2 pcs) |
1 x | Savox Brushless Servo SB-2271SG |
1 x | Servo GO-1088MGW 74 kg.cm 0.125s/60º |
1 x | Fully Threaded Steel Rod alumin 100 mm M3 (2 pcs) |
1 x | Servo GO-12S70MG 20.5kg.cm 0.06s/60º |
1 x | Servo TOPMODEL STANDARD S3217 |
1 x | Control for forward wheel (MINI) |
1 x | Transmitter Stick Ends V4 Blue/Silver - M3 (2 pcs) |
1 x | Servo GO-09 9g |
1 x | Servo AN-8 HBA |
1 x | Servo KST X15-1208 V8.0 13.5Kg HV |
1 x | Brazo servo aluminio KST 25T-5V2,3515,325,125,135,145X10,X12,A13 |
1 x | Servo KST BLS905X HV V2.0 8Kg 20mm |
1 x | SAVOX SH 0254 servo |
1 x | ALU servo arm 3 mm shaft |
1 x | Futaba 24/30 mm servo pull-pull double arm with ball link |
1 x | Adapter rotula M3 |
1 x | Programador FUTABA USB CIU-3 |
1 x | Servo inverter |
1 x | Servo MKS HBL599 SL |
1 x | Hitec 25 mm servo arm with M3 ball link |
1 x | Servo MKS 6100 DS |
1 x | Futaba 30 mm servo rounded arm |
1 x | Futaba 76/92 mm servo pull-pull double arm with ball link HUB Al |
1 x | Servo MKS HV 777A+ |
1 x | Futaba 25 mm servo arm with M3 ball link |
1 x | Futaba 30 mm servo arm with M3 ball link |
1 x | HV6150 Digital Servo |
1 x | Servo FUTABA BLS 276SV |
1 x | SERVO S9177SV HV S-Bus2 Programable |
1 x | Servo FUTABA SBL 471 SV |
1 x | Servo MKS HV69 |
1 x | Servo Robbe FS 525 BB MG HV |
1 x | Servo MKS HBL550 |
1 x | Futaba 54 mm servo arm with ball link |
1 x | Futaba 46 mm servo arm with ball link |
1 x | Hitec 46 mm servo arm with ball link |
1 x | HITEC 17 mm servo arm with ball link HITEC |
1 x | Servo ROBBE FS-31 Pico Servo |
1 x | Hitec 52 mm servo arm |
1 x | Rudder tandem for two Futaba servos |
1 x | Futaba BLS255/272/471SV - Gear Set |
1 x | Futaba 25 mm servo arm with ball link |
1 x | Servo MKS 6100 DS |
1 x | Servo MKS HV6130 |
1 x | FUTABA 20 mm servo arm with ball link |
1 x | Horizontal mounting servo holder |
1 x | Futaba 76/92 mm servo pull-pull double arm with ball link |
1 x | Futaba BLS152 - Upper Case |
1 x | Servo MKS HV6120H |
1 x | Servo MKS HV1220 |
1 x | Landing gear Rocket 400 |
1 x | Allen wheel collar M3x5 |
1 x | Allen wheel collar M4x6 |
1 x | Aluminun wheel collar 6 mm Ø (4 uds) |
1 x | 45 mm rods set for direction control |
1 x | 38x4,5 mm wires output (2 pcs) |
1 x | Aluminun wheel collar 2.5 mm Ø (4 uds) |
1 x | Aluminun wheel collar 3.5 mm Ø (4 uds) |
1 x | Clip fixing for wing (2 pcs) |
1 x | 41x5,5 mm wires output (2 pcs) |
1 x | Cable tie mounts 4.3 (4 uds) |
|
9,599.75EUR |