12 x | Balsa panel 4.0x100x1000 mm |
1 x | Balsa panel 2.0x100x1000 mm |
2 x | Beech dowels 2.0 x 1000 mm |
1 x | Balsa panel 2.5x100x1000 mm |
1 x | Balsa panel 5.0x100x1000 mm |
1 x | BALSA triangular 10x10x1000 mm |
1 x | BALSA trip 4.0x4.0x1000 mm |
2 x | Birch plywood plate 600x300x3.0 mm |
1 x | Balsa panel 1.5x100x1000 mm |
1 x | BALSA trip 2.0x2.0x1000 mm |
1 x | Balsa panel 1.0x100x1000 mm |
3 x | Beech dowels 4.0 x 1000 mm |
1 x | A/C quality beech plywood 600x300x0.6 mm |
2 x | A/C quality beech plywood 600x300x0.8 mm |
1 x | BALSA trip 3.0x3.0x1000 mm |
1 x | BALSA triangular 15x15x1000 mm |
1 x | Balsa panel 3.0x100x1000 mm |
2 x | quality beech plywood BIRCH 600x300x2.0 mm |
1 x | Birch plywood plate 600x300x4.0 mm |
1 x | A/C quality beech plywood 600x300x5.0 mm |
1 x | A/C quality beech plywood 600x300x1.5 mm |
1 x | Towing hook <3m |
1 x | Fixed launching hook |
1 x | LOWER TOW HOOK |
1 x | Tow hook for tug |
1 x | Adjustable launching hook |
1 x | Towing hook |
1 x | SERVO HOLDER |
2 x | Round Rod 1,5x1000 mm |
1 x | Round Rod 3,0x1000 mm |
1 x | ABS Strip 1.5x8.0x1000 mm |
1 x | Round Rod 1,25x1000 mm |
1 x | ABS Strip 1.0x3.0x1000 mm |
1 x | Strip ABS 2.0x10.0x1000 mm |
1 x | Strip ABS 2.0x3.0x1000 mm |
1 x | ABS I Strip 20x10x1000 mm |
2 x | Motor DLE 170 M- Paramotors |
1 x | Motor DLE 200cc Std |
1 x | Walnut wood slat 1.5x1.5x1000 mm |
1 x | Liston HAYA 10 x 10 x 1000 mm |
1 x | Pine wood slat 6.0x6.0x1000 mm |
2 x | Pine wood slat 3.0x7.0x1000 mm |
1 x | Pine wood slat 10x10x1000 mm |
1 x | Beech dowels 10 mm x 1000 mm |
1 x | Mahogany wood slat 2.0x2.0x1000 mm |
1 x | Birch plywood plate 600x300x3.0 mm |
1 x | Pine wood slat 2.0x10.0x1000 mm |
1 x | Walnut wood slat 2.0x2.0x1000 mm |
1 x | Birch plywood plate 600x300x1.5 mm |
1 x | Plywood sheet BEECH 600 x 300 x 2,0 mm |
1 x | Pine wood slat 2.0x2.0x1000 mm |
2 x | Birch plywood plate 600x300x2.0 mm |
1 x | Trailing edge BALSA 35x8x1000 mm |
2 x | Pine wood slat 5.0x5.0x1000 mm |
1 x | Lite Plywood panel 600x300x2.0 mm |
1 x | Dremel PERMAGRIT thin lime |
1 x | Dremel PERMAGRIT 18 mm round lime |
1 x | Parachute expulsion foam |
1 x | ABS tube 3.0x2.0x330 mm |
1 x | Ball link M2 (10 pcs) |
1 x | 2 LiPo XH>EH adapter |
1 x | Decorative caps, multicoloured |
1 x | Propeller hub spacer 8/5.5 |
1 x | 40 mm 1/4" Race propeller (rigth hydropropeller) |
1 x | Propeller G-Sonic 20x8 |
2 x | MZ-12, 6 Channel HoTT |
1 x | Quick hose connector 6-4 mm |
1 x | Balanceradapter JST-XH (Heli 47G) 2-6 c. |
1 x | Foreman, scale 1:32 |
1 x | POLARON EX 800w charger |
1 x | DPSI Micro SingleBat 5.9V/7.2V F3A Edition magnetic switch |
1 x | Switch magnet for gas cap and magnet switch actuators |
1 x | DPSI RV Mini 6 Magic with Gas-Cap switch |
1 x | PowerBox PowerExpander SRS |
1 x | Extension for SensorSwitch 60cm |
2 x | T-Motor MN705-S Kv125 (pack 2 uds) |
1 x | Motor DLE 430 cc - Paramotors |
1 x | 2 piece mounting frame Battery 3200 / 4000 |
1 x | 20x200 mm battery rings |
1 x | SE Ring 480 mm (2 pcs) |
2 x | SE Ring 330 mm (4 pcs) |
1 x | Spinner NUT M4 |
1 x | SE Ring 300 mm (2 pcs) |
2 x | 14x60 mm Mini rings Tie Wraps (4 pcs) |
2 x | Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs) |
1 x | Pad self adhesive, up to 3mm / 0.12″, (10 pcs) |
1 x | Waterproof adhesive tape, width 19mm, length 25m |
1 x | Spinner Alumin. fixed propeller 40 mm / 4,0 mm |
1 x | Tape GFK 38 mm |
1 x | SE Ring 360 mm (2 pcs) |
1 x | Spinner Alumin. fixed propeller 40 mm / 5,0 mm |
1 x | 20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
1 x | Spinner Alumin. fixed propeller 40 mm / 3,2 mm |
1 x | 26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
2 x | RUDDOG Protection and Heat Shield Tape (2mx50mm) |
1 x | 10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
1 x | MPX-Dean "T" Adapter |
1 x | USB HLS prog. interface |
1 x | PWC6 PowerWingConnector for 6 servos with fuselage socket |
1 x | Red copper lacquer wire Ø0,2 mm (5 m) |
1 x | SWTU2 switch |
1 x | Carbon rectangular rod 3.0 mm x 1.0 x 1000 mm |
1 x | Carbon fiber flat 1000x3.0x1.0 mm |
1 x | Carbon fiber rod 7.0 mmx1000 mm |
1 x | PowerBox Competition SR2 |
1 x | Filter Capacitor JR |
1 x | Motor 2212 (1000KV) Quadcopter F450 |
1 x | AXI 2204 Multicopter |
1 x | P 17×5.8 Prop-2PCS/PAIR |
2 x | Propeller FALCON 32,5x11 PUSHER Carbono |
1 x | DPSI Micro-DualBat 5.9V / 7.2V MPX-JR |
1 x | PowerBox Evo |
1 x | Motor DLE 200cc Premium Muffler |
1 x | DPSI RV Mini 5 (2008) |
1 x | PowerBox MAG Sensor |
1 x | Propeller set 400 (2R+2L) |
1 x | OLED-Display for PowerBox Mercury SRS |
1 x | PowerBox 12 |
1 x | PowerBox iGyro SAT |
1 x | Emcotec SPS Magnetic Switch Actuator |
1 x | Aluminium coupler M3/2 with ball bearing (1 pcs) |
1 x | Pine wood slat 3.0x5.0x1000 mm |
1 x | Linden wood slat 2.0x2.0x1000 mm |
1 x | Walnut wood slat 3.0x3.0x1000 mm |
1 x | MPS Gas-Cap-Powerswitch |
1 x | Steering arm 16 mm Ø 3 mm (2 uds) |
1 x | Covered closure or fairings |
1 x | Electric spoiler 250 mm (2 pcs) |
1 x | Steering arm 12 mm Ø 3 mm (2 uds) |
1 x | Vertical cockpit anchor "tipe F3A" (2 pcs) |
1 x | Three-position switched channel, short |
1 x | Multi-adapter balancer JST - TP |
1 x | TP/TopFuel - XH 2/3S Adapter |
1 x | Switching module high voltage SXH |
1 x | Steering arm 12 mm Ø 4 mm (2 uds) |
1 x | Crimping sleeves for cable 0.70 mm (10 pcs) |
1 x | Screw-lock connector Ø 2 mm (2 uds) |
1 x | Cierre cabina aluminio Ø5, I=16 mm |
1 x | Locking cable tie 4.6x203 (uds) |
1 x | Steering arm 12 mm Ø 4 mm |
1 x | Steering arm 16 mm Ø 4 mm |
1 x | Screw-lock connector M2 (2 uds) |
2 x | Steering arm 16 mm Ø 4 mm (2 uds) |
1 x | Stainless steel cable Ø 1.3 mm (10 m) |
1 x | Aluminium alloy coupler for carbon tube 6/M4 |
1 x | Stainless steel cable Ø 0.62 mm (10 m) |
1 x | Stainless steel cable Ø 0.5 mm (2 m) |
1 x | Cabin latch Fox MDM1 4m (pair) |
2 x | Canopy Latch |
1 x | Locking cable tie 3.2x142 (uds) |
2 x | Steering arm 16 mm Ø 3 mm |
1 x | Canopy Lock V1 M3 Blue (2 pcs) |
1 x | Canopy Lock V1 M3 Red (2 pcs) |
1 x | Locking cable tie 2.5x100 (uds) |
2 x | Screw-lock pushrod conn snap Ø 1.5 mm (2 uds) |
1 x | SUS wire 3m (nylon coated) |
1 x | L cockpit anchor "tipe F3A" (2 pcs) |
1 x | Cierre cabina aluminio Ø4, I=10 mm |
1 x | POWER PEAK D7 EQ-BID 12V/230V-Duo Charger |
1 x | Carbon fiber rod 5.0 mmx1000 mm |
1 x | Propeller MASTER AIRSCREW 9x6 |
1 x | Propeller MEJLIK 28.5x12 S-3 Blades |
1 x | Propeller Pleg CAM-Prop 8x6 |
1 x | Propeller APC 11x7 Glow/Gas |
1 x | Propeller APC 11x5 Glow/Gas |
1 x | FALCON 33X11W CARBON PROPELLER (GAS) |
1 x | 13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
1 x | Tape GFK 50 mm |
1 x | PSC 6 |
1 x | SPS 70V 140/280 A |
1 x | Opto Gas Engine Kill Switch |
1 x | Selfstart electronic switch |
1 x | Multi-adapter balancer JST/C - TP |
1 x | MAX BEC 2 |
1 x | Interruptor RX/Batterie |
1 x | DUPLEX 2,4EX Stick with 3-Position Switch for Transmitter DC/DS |
1 x | DUPLEX 2,4EX Switch SAFETY 2-Position Safety DC-16/14 |
1 x | DUPLEX 2.4EX Central Box 320 |
1 x | Motor Eachine Racer 250 Brushless Motor - BG2204 2300kv - CCW th |
1 x | Adapter 3,2 mm M5 for spinner 30 mm fixed propeller |
1 x | Allen wheel collar M3x3 |
1 x | Mahogany wood slat 3.0x3.0x1000 mm |
1 x | Brass rod Ø 1.0 mm x 1000 mm |
1 x | Brass hexagonal rod Ø 4 mm x 1000 mm |
1 x | FALCON 24X10 CARBON PROPELLER (GAS) |
1 x | Propeller MASTER 5,5x4 |
1 x | Propeller MASTER AIRSCREW 13x6 |
1 x | Propeller MEJLIK 22x10 |
1 x | 6x4 tree blades propeller |
2 x | DPSI RV Mini 6 (2008) |
1 x | Optotronix X-Carrier |
1 x | PowerBox Sensor V3 MPX/Jr |
1 x | USB Interface Adapter |
1 x | BALSA trip 2.0x10.0x1000 mm |
1 x | SE Ring 350 mm (2 pcs) |
1 x | 13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
1 x | PowerBox SparkSwitch RS |
1 x | SBEC 40 |
1 x | Electronic switch JETI SP06 Opto |
1 x | Opto Gas Engine Kill Switch |
1 x | Extension 5 lipos JST/C - JST |
1 x | Epoxy QUIK-CURE™ 5 min (130g) |
1 x | Extension 2/3 lipos JST - JST/C |
1 x | MAX BEC 2D plus EX |
1 x | Propeller MASTER 7x3 |
1 x | DUPLEX 2.4EX Central Box 220 + 2x Rsat2 + RC Switch |
1 x | DPSI RV Mini 5 Magic |
1 x | Combo lighting module with covering drop shape |
1 x | Hose clamps 0.16-0.20in, (4 pieces) |
1 x | Adapter 4,0 mm M8 |
1 x | 3 mm Short Prop Adapter M5 |
1 x | 10 mm dogdrive props |
1 x | Aluminun wheel collar 2 mm Ø (4 uds) |
1 x | Adapter 5,0 mm M8 |
2 x | USB Interface REVOLECTRIX for CellPRO 10s |
1 x | PowerBox PROFESSIONAL |
1 x | Glass Bubbles (0.12g) 400 G (aproxx 3.3 l) |
1 x | Split M1,2x10 (10 pcs) |
1 x | Split pin 1.6x16 mm (10 uds) |
1 x | Fully Threaded Steel Rod M2,5 (2 uds) |
1 x | Fully Threaded Steel Rod M2,0 (2 uds) 250mm |
1 x | Epoxy 40 min. 4kg (Hardener) |
1 x | Epoxy 40 min (Hardener). 1 Kg |
1 x | Epoxy Resin L + Hardener GL 1 (30 min) |
1 x | Cinta Goldfix 1m |
1 x | Epoxy 10 min 190g |
1 x | Epoxy Resin L + Hardener L (40 min) 240g (200g Resin L + 40g Har |
1 x | Spikes Band (5 m) |
1 x | Cockpit plastic closing |
1 x | Fully Threaded Steel Rod Duralumin 80 mm M3 (2 pcs) |
1 x | Fully Threaded Steel Rod alumin 40 mm M3 (2 pcs) |
1 x | PSC 5 |
1 x | GlassBubbles 2.5 g/cm³ Panda, tin (approx. 1 l) |
1 x | |
1 x | Mixing tube for double syringes and cartridges (MR 1:1 and 2:1) |
1 x | Epoxy Casting Resin + Hardener "water-clear" (300 min) |
1 x | Fully Threaded Steel Rod alumin 70 mm M3 (2 pcs) |
1 x | Fully Threaded Steel Rod alumin 50 mm M3 (2 pcs) |
1 x | Fully Threaded Steel Rod Duralumin 70 mm M3 (2 pcs) |
1 x | Stainless steel cable Ø 0.5 mm (10 m) |
1 x | Cap closure 33/23.5mm (2 uds) |
1 x | Fully Threaded Steel Rod alumin 100 mm M3 (2 pcs) |
1 x | Glass Bubbles 0.20 g/cm³ Panda, tin/ 100 g (approx. 1 l) |
1 x | Thixotropic agent tin/ 15 g (approx. 350ml) |
1 x | Cotton Flocks, bag/ 500 g |
1 x | Wheel collar 4 mm Ø (4 uds) |
1 x | Snap short M2 (10 uds) |
1 x | Fully Threaded Steel Rod Duralumin 90 mm M3 (2 pcs) |
1 x | Wing bolts M3 Steel screw blue (2 pcs) |
1 x | Tip wing protector 40x14 (2 pcs) |
1 x | Pushrod octagone 4/3 |
1 x | Servo GO-1070MG 40 kg.cm 0.10s/60º |
1 x | Micro screw-lock pushrod conn snap Ø 1 mm (2 uds) |
1 x | Wheel collar 3.5 mm Ø (4 uds) |
1 x | Wheel collar 2 mm Ø (4 uds) |
1 x | Pushrod octagone 3/2 |
1 x | Triple rod con. 2mm Pushrod (2 pcs) |
1 x | M2-250 mm Carbon Fiber Adjustable Push Rod Sets (2 pcs) |
1 x | One touch canopy lock |
1 x | Lead with adhesive (2 pcs) |
1 x | Wing bolts M6 Steel screw Blue (2 pcs) |
1 x | Landing gear frontal support 25x32x16 |
1 x | Epoxy adhesivo Elan-tech ADH 981.892 50ml (dark grey) |
1 x | Foaming agent for epoxy resins 200 g |
1 x | Epoxy L 40 min. 10 kg (Resin) |
1 x | Epoxy L 40 min. (1 Kg) 715g Resina / 285g Hardener S (15 min) |
1 x | Epoxy Resin L + Hardener L (40 min) 1Kg (715g Resin L + 285g Har |
1 x | Epoxy Resin L + Hardener LT kit/ 3125g |
1 x | Epoxy Resin HT 2 + Hardener HT 2, kit/ 296 g |
1 x | Epoxy 40 min (Resin). 5 Kg |
1 x | Epoxy Resin L + Hardener GL2, kit/ 930 g |
1 x | Epoxy 40 min (Resin). 25Kg |
1 x | Cockpit latch closing I=10 mm |
1 x | Control for forward wheel (MINI) |
1 x | Fully Threaded Steel Rod alumin 70 mm M2,5 (2 pcs) |
1 x | Cockpit aluminium closing |
1 x | Fully Threaded Steel Rod alumin 60 mm M3 (2 pcs) knurled |
1 x | Crimping sleeves for cable 0.85 mm (10 pcs) |
|
24,817.99EUR |