1 x | Gates hinge aluminium (1 pcs) |
2 x | Indoor hinge with servo arm integraded |
2 x | Flap hinge (6 pcs) |
2 x | Nylon hinge 20x20x0,3 (10 pcs) |
1 x | Nylon hinge 20x15x0,3 (10 pcs) |
1 x | Gates hinge black 30x16 mm (2 pcs) |
2 x | 67 mm cylidric hinge Ø 5 mm (4 pcs) |
4 x | Pin type hinge Al 3,0x50 mm (2 pcs) |
1 x | 43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs) |
1 x | Medium pin type hinge (12 uds) |
1 x | 76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs) |
1 x | 18 mm reinforced hinge |
2 x | Pin type hinge Al 4,5x70 mm to wire (2 pcs) |
1 x | Micro flex hinge (12 uds) |
1 x | Cylidric hinge 33 mm Ø 2 mm (5 pcs) |
1 x | 67 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs) |
3 x | 48 mm cylidric hinge Ø 2,5 mm (5 pcs) |
1 x | 67 mm cylidric hinge Ø 4,5 mm (5 pcs) |
2 x | Cylidric hinge 43 mm Ø 2,5 mm (5 pcs) |
3 x | Fast'n EZ-CA-Hinge (12 uds) |
3 x | Fast'n EZ-CA-Hinge, lite (12 uds) |
2 x | Nylon hinge 15x0,3 (10 pcs) |
4 x | Long pinned hinge (6 uds) |
1 x | Pin type hinge Al 4,5x70 mm (2 pcs) |
3 x | Pin type hinge Al 4,5x70 mm demount (2 pcs) |
2 x | Nylon hinge for flaps 33x9 (2 pcs) |
3 x | 48 x 10 mm cylidric hinge Ø 3,0 mm (10 pcs) |
2 x | Electric spoiler 250 mm (2 pcs) |
2 x | SUS wire 3m (nylon coated) |
1 x | Crimping sleeves for cable 0.85 mm (10 pcs) |
1 x | Canopy Lock V1 M3 Red (2 pcs) |
1 x | Covered closure or fairings |
1 x | Steering arm 12 mm Ø 4 mm |
3 x | Micro screw-lock pushrod conn snap Ø 1 mm (2 uds) |
1 x | Steering arm 16 mm Ø 3 mm |
1 x | Locking cable tie 2.5x100 (uds) |
2 x | Ventus 1:4 set of instruments |
2 x | Steering arm 16 mm Ø 3 mm (2 uds) |
2 x | Cierre cabina aluminio Ø5, I=16 mm |
1 x | Screw-lock connector Ø 2 mm (2 uds) |
1 x | Crimping sleeves for cable 0.70 mm (10 pcs) |
2 x | Stainless steel cable Ø 0.5 mm (20 m) |
2 x | Steering arm 12 mm Ø 4 mm (2 uds) |
1 x | Stainless steel cable Ø 0.52 mm - 15 kp (10 m) |
1 x | Xplorer1 anemometro |
2 x | Gates hinge |
1 x | 25 mm reinforced hinge |
1 x | 15 mm reinforced hinge |
1 x | Pin type hinge Al 3,0x50 mm demount (2 pcs) |
2 x | 33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs) |
1 x | Motor DLE 430 cc - Paramotors |
1 x | Big Crow DLE-170M |
1 x | Small Crow DLE-170M |
1 x | Motor DLE 200cc Premium Muffler |
1 x | Motor DLE 200cc Std |
1 x | OBECHI sheet 2.0x3.0x1000 mm |
1 x | Cabel "Y" 30 cm (Futaba) |
1 x | Carbon fiber rod 0.5 mmx1000 mm |
1 x | Unmounted aluminium pin 6x98 mm (2 pcs) |
1 x | Dummy motor GPW Wasp Scale 1/4 |
1 x | Adaptadores carga 6s JST-XH |
1 x | Combustible Glow "KAVAN" air/heli 5% nitro |
3 x | Birch plywood plate 600x300x1.2 mm |
1 x | Blades 330mm |
1 x | Adapter 5,0 mm M6 for spinner 40 mm fixed propeller |
1 x | Locking cable tie 3.2x142 (uds) |
1 x | Adapter 2,3 mm M5 for spinner 30 mm fixed propeller |
1 x | Threaded coupler Micro M2 Ø 0,8 (10 pcs) |
1 x | L cockpit anchor "tipe F3A" (2 pcs) |
1 x | One touch canopy lock |
1 x | AXI 2204 Multicopter |
1 x | Steering arm 16 mm Ø 4 mm |
1 x | Vertical cockpit anchor "tipe F3A" (2 pcs) |
2 x | Motor Eachine Racer 250 Brushless Motor - BG2204 2300kv - CCW th |
1 x | Cierre cabina aluminio Ø4, I=10 mm |
1 x | Motor Eachine Racer 250 Brushless Motor - BG2204 2300kv - CW thr |
1 x | F450/550 Quadcopter, landing gear |
2 x | Quadcopter Q50 Kit Carbon Fiber |
1 x | Cabin latch Fox MDM1 4m (pair) |
1 x | Aluminium alloy coupler for carbon tube 6/M4 |
1 x | Steering arm 12 mm Ø 3 mm (2 uds) |
1 x | Motor brushless 1806 - 2300 Kv Cuadracopter |
2 x | Small flex hinge (12 uds) |
2 x | Miniature brass strap hinge, 1 m |
1 x | Pin hinge 26x11 mm (10 uds) |
1 x | Wing bolts M3 Steel screw blue (2 pcs) |
1 x | Hard brass tubing (L 1000 mm, Ø13.0 mm, Ø12.0 mm) |
1 x | Carbon tube 3K-PW (L 2000 mm, Ø25 mm, Ø22.5 mm) |
1 x | Hard brass tubing (L 1000 mm, Ø10.0 mm, Ø9.1 mm) |
2 x | Carbon fiber rod 5.0 mmx1000 mm |
2 x | Carbon fiber rod 1.5 mm x 2000 mm |
1 x | Carbon fiber flat 1000x3.0x1.0 mm |
1 x | Carbon fiber rod 10 mm x 1000 mm |
1 x | Carbon fiber rod 4.0 mmx1000 mm |
2 x | Carbon fiber rod 6.0 mmx1000 mm |
1 x | Carbon fiber flat 1000x6.0x0.8 mm |
1 x | Carbon wing joinner 13,4 mm Ø 0,48 mm |
3 x | Pin hinge 34x16 mm (10 uds) |
1 x | Nylon hinge for flaps/gates 27x10,5 (2 pcs) |
1 x | ROBART POINT HINGE 4,7mm (5 pcs) |
1 x | Robart Door Hinge (Pk2) |
1 x | Small pinned hinge (6 uds) |
2 x | Pin hinge 39x20 mm (10 uds) |
2 x | Extension 30 cm (Futaba) |
2 x | ESC KAVAN R-80SB SBEC 80A |
2 x | Soldering tip for KAVAN soldering iron KAV66.8338 |
2 x | Swashplate metal LAMA |
2 x | M3 INDUSTRIAL ball link (2 uds) |
2 x | Superlight wheel 100 mm with valve (2 pcs) |
2 x | Superlight deluxe wheel 45 mm (2 pcs) |
1 x | Set freno para ruedas Dia. 127 mm |
2 x | Motor KAVAN PRO 2225-1600 |
3 x | A/C quality beech plywood 600x300x0.8 mm |
2 x | A/C quality beech plywood 600x300x6.0 mm |
1 x | Superlight deluxe wheel 68 mm (2 pcs) |
2 x | Superlight deluxe wheel 40 mm (2 pcs) |
2 x | ESC KAVAN PRO-160HV Opto 160 Amp |
1 x | Superlight deluxe wheel 50 mm (2 pcs) |
1 x | Threaded coupler M2,5 (10 pcs) |
1 x | Superlight standard wheel 100 mm (2 pcs) |
1 x | Blade holder metal LAMA |
1 x | Superlight wheel 125 mm with valve (2 pcs) |
1 x | Superlight deluxe wheel 62 mm (2 pcs) |
1 x | |
2 x | Round Rod 1.0x3.5 cm |
1 x | 150 mm inflatable superlight deluxe wheel (2 pcs) |
2 x | Servo GO-1053 MG 20.0kg |
2 x | Servo GO-1053MG 20 kg.cm 0.17s/60º |
2 x | Servo GO-1035MG 16 kg.cm 0.08s/60º |
1 x | Raer wall |
1 x | FEMA DEFLECTOR LEVER FOR WHEEL BRAKE, |
2 x | Autogyro Cierva C30 Spain |
1 x | Spinner Alumin. fixed propeller 40 mm / 3,0 mm |
1 x | Spinner Alumin. propeller pleg. 30 mm / 2,3 mm |
1 x | Spinner propeller pleg. 40 mm / 5,0 mm |
1 x | LA500 rotor head shaft |
1 x | LA500 tail empennage |
1 x | LA500 rotor head core |
1 x | Grub screw M3x3 shouldered (2 pcs) |
1 x | Head lower part |
1 x | Head lower part New |
1 x | Pilot LA 500 |
1 x | LA500 housing-upper cyclic |
1 x | LA500 ciclic lever |
1 x | APM2.6 Power module with 5.3V DC BEC |
1 x | Allen wheel collar M3x5 |
1 x | ABS "T" angle 2.0x2.0x1000 mm |
1 x | ABS rectangular profile 12x6.0x1000 mm |
1 x | ABS "T" angle 4.0x4.0x1000 mm |
1 x | ABS angle 1.5x1.5x1000 mm |
1 x | Spinner propeller pleg. 40 mm / 4,0 mm |
1 x | Spinner Alumin. fixed propeller 40 mm / 3,2 mm |
1 x | Spinner negro 40 mm |
1 x | Spinner propeller pleg. 30 mm / 4,0 mm |
1 x | Cockpit plastic closing |
1 x | Combo 4 pcs AXI 2204 Multicopter |
1 x | ESC ALPHA 60A HV |
1 x | Cap closure 33/23.5mm (2 uds) |
1 x | Allen wheel collar M4x6 |
1 x | Pushrod greyline 3/2 with coupler M2 L: 1000 mm |
1 x | Small pinned hinge (12 uds) |
1 x | Gates hinge 30x16 mm (2 pcs) |
1 x | ABS Strip 1.5x3.0x1000 mm |
1 x | 290 mm M5 Prop shaft |
1 x | 270 mm 3/3 mm shaft ship |
1 x | ABS rectangular profile 10x5.0x1000 mm |
1 x | ABS tube 14.0x10.0x1000 mm |
1 x | ABS I Strip 20x10x1000 mm |
1 x | ABS Strip 1.5x2.0x1000 mm |
1 x | ABS angle 2,0x2,0x1000 mm |
1 x | ABS tube 16.0x14.0x1000 mm |
1 x | ABS tube 20.0x18.0x1000 mm |
1 x | ABS Strip 1.5x8.0x1000 mm |
1 x | ABS angle 4,0x4,0x1000 mm |
1 x | ABS Strip 1.0x5.0x1000 mm |
2 x | Wing Joiner ULTIMATUM 2.0 m |
2 x | BULL MØ1 2.600mm "AeroPANDA" |
2 x | Set transmisions ULTIMATUM 2.0 (dura/aluminium) |
1 x | Birch plywood plate 600x300x1.5 mm |
1 x | M3 Maxi ball link (2 uds) |
1 x | Birch plywood plate 600x300x2.5 mm |
1 x | Press fitting for 1,0 diam. steel cable (10 pcs) |
1 x | KAVAN Threadlocker - Blue 10ml |
1 x | Servo GO-12S69MG 26kg.cm 0.10s/60º |
1 x | SIG Coverall 1.2x0.9 m |
1 x | Shaft sleeve LAMA |
1 x | Maxi Fuel Filter |
1 x | Electric Fuel Pump 12v |
1 x | Set transmisions BULL Mo1 (dura/aluminium) |
1 x | Cap Hispano Aviación |
1 x | ULTIMATUM 2.0 m green/black |
1 x | Set Stickers Ultimatum 2.0 - Andy Folienwelt |
1 x | Bags BULL Mo1 2.6m "Luxe" |
1 x | Set transmisions ULTIMATUM 2.0 (stainless/aluminium) |
1 x | ULTIMATUM 2.0 m orange/blue |
1 x | ULTIMATUM 2.0 m red/black |
1 x | BULL MØ1 2.600mm "ALPINE" |
1 x | BULL MØ1 2.600mm ORANGE |
1 x | Fuselage BULL MØ1 2.600mm |
1 x | Superlight deluxe wheel 75 mm (2 pcs) |
1 x | KAVAN Hand crank fuel pump |
1 x | Program Card KAVAN ES |
1 x | Propeller balancer |
1 x | SKY RC T400Q Charger 4x100w |
1 x | Servo GO-1017MG 4.5 kg.cm 0.10s/60º |
1 x | SIG Coverall 1.2x1.8 m |
1 x | ULTIMATUM 2.0 PRO "McLAren" |
1 x | BULL MØ1 2.600mm "McLAREN-GULF" |
1 x | Tank BULL MØ1 (3.2 L) + 1x (0.9 L) + 1x (0.9L Smoke) PRO |
1 x | Vest clothes Hispano Aviación |
1 x | FESTO connector M5 Quick 6 mm |
1 x | Tank ULTIMATUM 2.0 (3.2 L) + Smoke (0.9 L) PRO |
1 x | Canopy BULL MØ1 2.600mm |
1 x | Softshell Hispano Aviación |
1 x | BULL MØ1 2.600mm GREEN |
1 x | BULL MØ1 2.600mm BLUE |
1 x | ULTIMATUM 2.0 PRO "Full Carbon Red" |
1 x | Servo GO-1013 MG 3.8kg |
2 x | Servo GO-1023MG 7.0 kg.cm 0.09s/60º |
2 x | Extension 15 cm (Futaba) |
1 x | Program card KAVAN PRO |
1 x | Metal clevis M2,5 (10 uds) |
1 x | Metal clevis M2 (10 uds) |
1 x | GRE-18 RTR Crawler 1:18 Blue |
1 x | Glow Plug Clip 1.3 Ah |
1 x | Sandpaper file 13 mm |
1 x | Fuel bottle 500 ccm |
1 x | Fully Threaded Steel Rod M2,0 (2 uds) 250mm |
1 x | Servo GO-13 MG 13g 2.8 Kg 0.12s/60º |
1 x | Servo Arm 25T M3 KAVAN 6.5 / 19.6 mm |
1 x | Recess mount-rem. glow plug set |
1 x | Servo GO-1280 MG 40 kg.cm 0.085s/60º |
1 x | Glow starter with charger 230v |
1 x | Servo GO-10S41MG 10.5 kg.cm 0.075s/60º |
1 x | Servo GO-12S70MG 20.5kg.cm 0.06s/60º |
1 x | Fully Threaded Steel Rod M2,5 (2 uds) |
1 x | Rubber Insert hard, 1 Pcs. |
1 x | LiPo KAVAN 3700 mAh 11.1v 40/80C |
1 x | Flybar support metal LAMA |
1 x | Kavan Car 25% nitro 1l |
1 x | M3 Maxi ball link (2 uds) |
1 x | SlowFlyer control horn (3 pcs) |
1 x | SAVAGE Max Red 1080 mm |
1 x | Lipo KAVAN 3300 mAh 7.4v 40/80C |
1 x | Conector MR-60 (pareja) |
1 x | LiPo KAVAN 3700 mAh 14.8v 40/80C |
1 x | Lipo KAVAN 2200 mAh 11.1v 40/80C |
1 x | Servo GO-1070MG 40 kg.cm 0.10s/60º |
|
66,035.03EUR |