2 x | 800TVL CMOS camera for FPV |
3 x | Servo NARO Max Std |
1 x | 2000A 12V Lithium Jump Starter with 150PSI Air inflator |
4 x | Camera Sony 4140+673 CCD with Built-in 200mw TX + antenna |
1 x | Pin type hinge Al 3,0x50 mm demount (2 pcs) |
1 x | Nylon hinge 15x0,3 (10 pcs) |
2 x | 43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs) |
2 x | Nylon hinge 20x15x0,3 (10 pcs) |
1 x | Pin type hinge Al 4,5x70 mm to wire (2 pcs) |
1 x | 67 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs) |
1 x | Canopy hinges for Discus 2c, Discus 2a, Ventus 2cx (2pcs) |
2 x | 18 mm reinforced hinge |
1 x | Small pinned hinge (12 uds) |
1 x | 67 mm cylidric hinge Ø 5 mm (4 pcs) |
2 x | Gates hinge black 30x16 mm (2 pcs) |
1 x | Nylon hinge for flaps/gates 27x10,5 (2 pcs) |
1 x | Pin type hinge Al 3,0x50 mm (2 pcs) |
1 x | 76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs) |
1 x | Flap hinge (6 pcs) |
2 x | Fast'n EZ-CA-Hinge (12 uds) |
2 x | Cylidric hinge 33 mm Ø 2 mm (5 pcs) |
1 x | 33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs) |
1 x | Prop Shaft Adapter 8 mm/M12 "long" |
1 x | 4 mm Prop Adapter M8 |
2 x | Steel tube (L 1000 mm Ø9 mm, Ø8,7 mm) |
1 x | SCHARNHORST accessories |
1 x | ABS tube 3.0x1.0x1000 mm |
1 x | 3 mm Prop Adapter M6 |
2 x | MG cannon 1.8 cm (5 pcs) |
1 x | ABS tube 5.0x3.0x1000 mm |
1 x | ABS tube 8.0x7.0x1000 mm |
1 x | 3.2 mm Prop Adapter M6 |
1 x | 2,3 mm Prop Adapter M6 |
1 x | Steel tube (L 1000 mm Ø6 mm, Ø5,7 mm) |
1 x | Steel tube (L 1000 mm Ø10 mm, Ø9,7 mm) |
1 x | Tirpiz Battleship 1:200 |
1 x | 3.17 mm Prop Adapter CN-Spinner |
1 x | ABS tube 7.0x5.0x1000 mm |
1 x | 3,2 mm Prop Adapter M8 |
1 x | Aluminium tube (L 1000 mm, Ø4.0 mm, Ø3.1 mm) |
1 x | La Capitania di Venetia accesories |
1 x | Dumper propeller 6/8 mm |
1 x | Jeti Black cap |
1 x | Aluminum Bayonet / strongal D25 mm / 1 m |
1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m |
1 x | Extension silicon 100 cm (Futaba) |
1 x | Motor DLE 200cc Std |
1 x | Carbon fiber rod 20 mmx1000 mm |
1 x | USB Mini Camera endoscope |
2 x | Vest clothes Hispano Aviación |
1 x | Glider retract undercarriage 8-16 Kg 2.5-3.2(without wheel) 140m |
1 x | Glider retract undercarriage 8-16 Kg 2.5-3.2(140 mm wheel with b |
1 x | Round flex hinge (12 uds) |
1 x | Retract undercarriage for gliders 3-7 Kg 3.8-4.3 (without wheel) |
1 x | Retract undercarriage |
2 x | Gates hinge 30x16 mm (2 pcs) |
1 x | Epoxy Resin HT 2 + Hardener HT 2 (60 min) 1 kg |
1 x | resin-hardener package L-385 with hardener H-385 (3.5 Kg) |
2 x | Hardener P-25, canister 2.5Kg |
3 x | Actuator Electric 25 mm HIGH TORQUE |
1 x | 48 x 10 mm cylidric hinge Ø 3,0 mm (10 pcs) |
1 x | Nylon hinge for flaps 33x9 (2 pcs) |
1 x | Epoxy Resin L 285 + Hardener 285 (Aero), kit/ 2.8 kg |
1 x | Actuator Electric 25 mm |
1 x | Set freno para ruedas Dia. 127 mm |
1 x | Stick coupler Ms 15 mm |
2 x | Fox 4000 mm Airworld,canopy frame |
1 x | 4 mm Prop Adapter CN-Spinner |
1 x | 10 mm Prop Adapter M12 |
1 x | Fournier RF-4D |
1 x | LO 100 Scale 1:2 - Modellbau Bruckmann |
1 x | ASW 20 5000 mm with winglets (Airwold) |
2 x | LS-8 GFK 6m Glider |
1 x | 6 mm Prop Adapter M8 |
1 x | LO 100 ARC 3.3m |
1 x | DG-303 ACRO 3750 mm (Airworld) |
1 x | 2.3 mm Adapter for 30 mm spinners |
1 x | Aero-Master Fuselage (Aero-naut) |
1 x | 3 mm Prop Adapter M6 |
1 x | Prop Shaft Adapter 5 mm/M8 "long" |
1 x | Surprise XII Rudder (Freudenthaler) |
1 x | Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm) |
1 x | ABS tube 14.0x10.0x1000 mm |
1 x | 80 mm rods set for direction control |
1 x | Aluminun wheel collar 2.5 mm Ø (4 uds) |
1 x | 90 mm rods + T patellas set for direction control |
1 x | 100 mm rods set for direction control |
1 x | LED lighting system High Power |
1 x | LED wire (orange - 2pcs) |
2 x | ABS tube 4.0x3.0x1000 mm |
2 x | Carbon tube (L 1000 mm, Ø18 mm, Ø16 mm) |
1 x | ABS tube 18.0x16.0x1000 mm |
1 x | Carbon tube (L 1000 mm, Ø1.5 mm, Ø0.7 mm) |
1 x | Aluminium tube (L 1000 mm, Ø5.0 mm, Ø4.1 mm) |
1 x | ABS tube 8.0x6.0x1000 mm |
2 x | L-39 Albatros 138"/3.5m lenght ARF |
2 x | E_brakes electronics |
1 x | Electric Landing Gear "Black Edition" ULTIMATUM 2.0 (Elektron Re |
1 x | Electric Landing Gear "Black Edition" ULTIMATUM 3.0 (Elektron Re |
1 x | ER-40eVo Set A [2x ER40 + RB-45] |
1 x | Digital weight, angle and balance meter BASIC |
1 x | Electric Landing Gear BULL Mo1 2.6 (Elektron Retracts) |
2 x | Ball Link ALU M3 - RH (1 pcs) |
3 x | Tren retractil ULTIMATUM 1.5 combo ER30 SEt B (ControlBox) |
1 x | Electric Landing Gear "Black Edition" BULL Mo1 2.6 GS200 (Electr |
1 x | Wheel 115 mm with electromagnet and brake disk + E-Brake (2 uds) |
1 x | |
1 x | VIPER JET 2.2m + Electric landig Gear Deco: 01 Red-Blac-kWhit |
2 x | Brazo servo aluminio 1.25/1.5" Futaba/MKS/Savox |
1 x | Wheel Ø 75 mm (1 ud) Electron Retracts |
1 x | ER40 Front Leg (with wheel 80mm) |
1 x | Nose wheel 62 mm |
2 x | Retract/Brake Cable |
1 x | Wheel 115 mm with electromagnet and brake disk (2 uds) |
1 x | Electron 22 mm Fitting barb |
2 x | Electric Landing Gear ASPIRE (Elektron Retracts) |
1 x | Electric Landing Gear ODYSSEY (Elektron Retracts) |
1 x | GS-200 Electronic |
2 x | 10-15mm Servo Arm HITEC |
1 x | Manual Controller |
2 x | 20-25mm Servo Arm |
1 x | Electric Landing Gear "Black Edition" BULL Mo1 2.6 (Elektron Re |
1 x | Electric Landing Gear GS-200 BULL Mo1 2.6 (Elektron Retracts) |
1 x | Brake disc Electron Retracts |
2 x | Wheel Ø 90 mm (1 ud) Electron Retracts |
1 x | 10-15mm Servo Arm |
2 x | RS-200 Touch Programmer |
1 x | Electric Landing Gear AVANTI XS (Elektron Retracts) |
3 x | Ventus 1:4 set of instruments |
1 x | Propeller APC 11x4.7 SF |
1 x | 3 mm Long Prop Adapter M5 |
1 x | Threaded coupler M3 (10 uds) |
1 x | Propeller APC 14x12 Electric |
1 x | Propeller APC 11x7 SF |
1 x | Propeller APC 10x5.5 MR Electric multirrotor PUSHER |
1 x | Propeller APC 11x5.5 Electric |
1 x | Propeller APC 11x8.5 Electric |
1 x | Propeller APC 10x5 Electric Pusher |
1 x | Propeller APC 11x8 Electric |
1 x | Propeller APC 13x6.5 Electric Pusher |
1 x | Propeller APC 13x4 Electric Pusher |
1 x | Propeller APC 11x4.5 Electric Pusher |
1 x | Propeller APC 10x7 Electric |
1 x | Propeller APC 10x5 Electric |
1 x | Propeller 10x4,7 SlowFlyer |
1 x | Locking cable tie 2.5x100 (uds) |
1 x | Threaded coupler ALU M2,5 Ø 4 (2 uds) |
1 x | Adapter 3,2 mm M6 |
1 x | Threaded coupler ALU M2 Ø 3 (2 uds) |
1 x | Threaded coupler M2,5 Ø 2 mm (10 pcs) |
1 x | Threaded coupler ALU M2,5 Ø 6 (2 uds) |
1 x | Medium pin type hinge (12 uds) |
1 x | Spinner propeller pleg. 40 mm / 5,0 mm |
1 x | Turbine KINGTECH K160 G4 |
1 x | 14 mm Portholes for screws (10 pcs) |
1 x | Turbina KINGTECH K120 G4 |
1 x | Screwdriver for Torx® TX8 |
1 x | Shaft for A60-L V4 |
1 x | A60-6XS V4 28-Pole |
1 x | Landing gear frontal support 25x32x16 |
1 x | Pushrod greyline 3/2 with coupler M2 |
1 x | 38x4,5 mm wires output (2 pcs) |
1 x | Aluminun wheel collar 5 mm Ø (4 uds) |
1 x | Pushrod octagone 4/3 with coupler M3 |
1 x | Tip wing protector 28x10x12 (2 pcs) |
1 x | Allen wheel collar M4x6 |
1 x | Large flex hinge (12 uds) |
1 x | Spinner propeller pleg. 42 mm / 5,0 mm |
1 x | Spare white 38-45 mm spinner |
1 x | Flap hinge 33x9 mm (6 pcs) |
1 x | 48 mm cylidric hinge Ø 2,5 mm (5 pcs) |
1 x | Spinner 4BL 4 blades pleg. prop 40 mm / 4,0 mm |
1 x | Fox MDM 1 4000 mm DeLuxe,Fundas deLuxe |
1 x | White spinner propeller pleg. 55 mm / 5 mm |
1 x | Propeller CFK 14x6.5 |
1 x | Miniature brass strap hinge, 1 m |
1 x | Spinner propeller pleg. 38 mm / 4,0 mm |
1 x | Propeller CFK 23x12 |
1 x | Fox MDM 1 4000 mm DeLuxe,Fox 1:4 set of instruments for the f |
1 x | Propeller CFK 12.75x13 |
1 x | Spinner propeller pleg. 42 mm / 4,0 mm |
1 x | Propeller CFK 11x8 |
1 x | Spinner black 40-45mm |
1 x | Propeller CFK 18x19 |
1 x | Spinner propeller pleg. 36 mm / 6,0 mm |
1 x | GP 15 JETA |
1 x | Propeller CFK 17x13 |
1 x | Spinner propeller pleg. 42 mm / 6,0 mm |
1 x | FOX MDM-1 3.500 mm ARF White |
1 x | Turbine KINGTECH K100 G4 |
1 x | Straightened rod Ø 5.0 mm x 1000 mm |
1 x | Propeller Pleg CAM Carbon 15x8 |
1 x | FOD Screen K45/60/70/85 |
1 x | Bluetooth Adapter JET CENTRAL |
1 x | Fod Guard 94x32 mm |
1 x | Crystal TX 35.100 Ch 70 |
1 x | Antenna holder bracket double |
1 x | TP/TopFuel - XH 2/3S Adapter |
1 x | Cable adapter iCharger |
1 x | Cable servo PREMIUM 1 m (blanco/rojo/negro) AWG21 + AWG26 TPE |
1 x | A60 Motor Mount Alu complete set |
1 x | Shaft for A60-L (140mm) |
1 x | Connectors banna oro 8,0 mm (Male) 5 pcs. |
1 x | EDF Stream-Fan 110mm kv780 |
1 x | Screwdriver for Torx® TX6 |
1 x | Propadapter for motor A60-V2 |
1 x | Propadapter for motor A50 |
1 x | Propadapter for motor A50-V3 |
1 x | Backmountset complete A40 |
1 x | 2 mm Prop Adapter M5 |
1 x | Aluminun wheel collar 4 mm Ø (4 uds) |
1 x | Aluminun wheel collar 6 mm Ø (4 uds) |
1 x | Landing gear frontal support 29x26x13,5 |
1 x | Wheel collar 3 mm Ø (4 uds) |
1 x | Cable tie mounts 4.3 (4 uds) |
1 x | Pushrod octagone 4/3 |
1 x | Pushrod greyline 4/3 with coupler M3 |
1 x | Allen wheel collar M3x3 |
1 x | Allen wheel collar M3x5 |
1 x | 11 mm Rubber pads (14 pcs) |
1 x | Tip wing protector 40x14 (2 pcs) |
1 x | Wheel collar 6 mm Ø (4 uds) |
1 x | Allen wheel collar M4x4 |
1 x | M2-250 mm Carbon Fiber Adjustable Push Rod Sets (2 pcs) |
1 x | Turbina DRAGON 30 Kg |
1 x | Hard brass tubing (L 1000 mm, Ø4.0 mm, Ø3.1 mm) |
1 x | CF tube (L 1000 mm, Ø1 mm, Ø0,5 mm) |
1 x | ABS tube 20.0x18.0x1000 mm |
1 x | ABS tube 6.0x5.0x1000 mm |
1 x | Fiberglass tube 6/4x1000mm |
1 x | ABS tube 7.0x6.0x1000 mm |
1 x | Aluminium tube (L 1000 mm, Ø7.0 mm, Ø6.1 mm) |
1 x | Steel tube (L 1000 mm Ø4 mm, Ø3,7 mm) |
1 x | Hard brass tubing (L 1000 mm, Ø3.0 mm, Ø2.1 mm) |
1 x | Steel tube (L 1000 mm Ø7 mm, Ø6,7 mm) |
1 x | 3D Spinner for DLE 30 |
1 x | Nose leg 155 mm with wheels 70 mm |
1 x | 55 mm aluminium spinner (Kavan) |
1 x | 57 mm aluminium spinner. |
1 x | Nose leg 155 mm with wheels 70 mm |
1 x | Sun Cover PC 21 XXL (JMB Jets) |
1 x | Hose connector stopper 4 mm |
1 x | 51 mm aluminium spinner. |
1 x | 76 mm aluminium spinner. |
1 x | Spinner 104x131 mm 115 g CFK-BS |
1 x | Spinner 100 mm GFK |
1 x | 95 mm aluminium spinner. |
1 x | 50 mm aluminium spinner (Kavan) |
1 x | 45 mm aluminium spinner (Kavan) |
1 x | Spinner 105 mm GFK |
1 x | Set Legs + Wheels with brake ASPIRE |
1 x | PC-21 2880 mm Tren aterrizaje electrico(Electron Retracts |
|
70,686.68EUR |