2 x | Cap Hispano Aviación |
1 x | Vest clothes Hispano Aviación |
1 x | Motor class 550 + "M" gearbox 2,85:1 |
2 x | 20x200 mm battery rings |
1 x | Brass hexagonal rod Ø 5 mm x 1000 mm |
1 x | Flap hinge 33x9 mm (6 pcs) |
1 x | Straightened rod Ø 14.0 mm x 1000 mm |
1 x | Screw-lock connector Ø 2 mm (2 uds) |
1 x | 13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
1 x | Anodized aluminium M4x0,7x20 mm screw (4 blue pcs) |
1 x | M2/M1/6 3Diam long black ball link V1 (2 pcs) |
1 x | 101x28 mm (4.0") Type jets aluminium core wheel |
2 x | 15 mm floating pad (30 pcs) |
3 x | Vasa model Catapult |
1 x | 1/12 Pilot "Cougar" |
2 x | Aluminium tube (L 1000 mm, Ø3.0 mm, Ø2.1 mm) |
2 x | 1/6 Pilot "Tony" |
1 x | A/C quality beech plywood 600x300x0.8 mm |
1 x | M3 Maxi ball link (2 uds) |
1 x | Support conector MPX (6 pcs) |
1 x | Ball link M3 (10 pcs, flat ball) |
2 x | Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm) |
2 x | 1/6 Pilot "Garry" |
2 x | Carbon fiber flat 1000x6.0x0.8 mm |
1 x | BALSA trip 4.0x4.0x1000 mm |
1 x | 127x43 Ø6.0 mm aluminium core wheel |
1 x | 6 mm ball link M3 (10 pcs) |
1 x | Blue metalic ball link M3/3 azul (2 pcs) |
2 x | Anodized aluminium servo M3x16 screw (4 red pcs) |
1 x | Support FUEL DOT V3 |
3 x | Carbon fiber rod 16 mm x 1000 mm |
1 x | Balsa panel 4.0x100x1000 mm |
1 x | Blind nut M6 (4 pcs) |
2 x | Carbon fiber rod 3.0 mm x 1000 mm |
1 x | Balsa panel 1.0x100x1000 mm |
1 x | Horn for flap control (1 pcs) |
1 x | Conector AS150 7mm antichispazo (Set: 2 pares) |
1 x | Strip 2,0x2,0x330 mm |
1 x | Kwik link AL M4 L:40 mm (2 pcs) + Pin Ø 2,5 mm |
1 x | Oracover Azul Cielo 2 m |
1 x | Horn 6/20 with M3 Bearing |
1 x | Oracover Green10 m |
2 x | Optical RPM Sensor |
1 x | Round Rod 4,0x1000 mm |
1 x | Brass control horn M3 short for wire (2 pcs) |
1 x | Monokote BLANCO jet (1.8x0.65m) |
1 x | Connectors DEANS (T) |
1 x | Connectors banna oro 2 mm (M/F) |
1 x | ABS Strip 1.5x4.0x1000 mm |
1 x | Aluminium coupler M3/2 with ball bearing (1 pcs) |
2 x | XH male balance (3S) connector (2 pcs) |
1 x | Shirt Hispano Aviación |
1 x | Steel tube (L 1000 mm Ø9 mm, Ø8,7 mm) |
1 x | Carbon wing joinner 13,4 mm Ø 0,48 mm |
2 x | Carbon fiber rod 2.0 mmx1000 mm |
1 x | GPS Logger Dymond |
1 x | Katana Mini carbon wheel pants (2 pcs) |
2 x | Bungee HLG Premium |
1 x | Carbon fiber rod 4.0 mmx1000 mm |
1 x | Lock nut M4 (10 pcs) |
1 x | Wing connector 8pin with pin strip, plug & socket |
2 x | XH female balance (6S) connector (2 pcs) |
1 x | M3-M4 rubber washer (8 pcs) |
2 x | Lock nut M2 (20 pcs) |
1 x | Flat washer 3.2 mm (20 pcs) |
2 x | Lock nut M6 (10 pcs) |
1 x | Circlik for shaft 1.5 mm (10 pcs) |
1 x | XT-60 connector (male) |
1 x | Hexagonal Nut M2 (10 pcs) |
1 x | XH male balance (7S) connector (2 pcs) |
2 x | XH female balance (5S) connector (2 pcs) |
1 x | Hard brass tubing (L 1000 mm, Ø5.0 mm, Ø4.1 mm) |
1 x | Steel tube (L 1000 mm Ø3 mm, Ø2,7 mm) |
1 x | Carbon tube 3K-PW (L 2000 mm, Ø14 mm, Ø12 mm) |
1 x | Steel tube (L 1000 mm Ø12 mm, Ø11,7 mm) |
1 x | Steel tube (L 1000 mm Ø7 mm, Ø6,7 mm) |
2 x | Landing gear axle Ø 5 mm (2 uds) |
2 x | Carbon fiber rod 5.0 mmx1000 mm |
1 x | Carbon fiber flat 1000x3.0x1.0 mm |
2 x | Carbon fiber flat 1000x3.0x0.5 mm |
2 x | Aluminun wheel collar 5 mm Ø (4 uds) |
2 x | Carbon fiber rod 1.0 mm x 1000 mm |
2 x | Wheel collar 4 mm Ø (4 uds) |
2 x | Carbon fiber rod 0.5 mmx1000 mm |
2 x | Carbon fiber rod 7.0 mmx1000 mm |
3 x | Carbon rectangular rod 10.0 mm x 1.0 x 1000 mm |
1 x | Squared carbon wing joinner 5x5x220 mm |
1 x | Carbon fiber rod 10 mm x 1000 mm |
2 x | Aluminun wheel collar 6 mm Ø (4 uds) |
1 x | Carbon fiber flat 1000x3.0x1.0 mm |
2 x | Carbon fiber rod 0.8 mmx1000 mm |
1 x | Carbon fiber flat 1000x3.0x0.13 mm |
2 x | Carbon fiber rod 14 mmx1000 mm |
2 x | Carbon rectangular rod 3.0 mm x 1.0 x 1000 mm |
3 x | XH female balance (4S) connector (2 pcs) |
1 x | Wing connector 8pin with pin strip, plug & socket |
1 x | Lock washer 3.2 mm (20 pcs) |
1 x | XT-90 connector (pair) |
2 x | Soporte carbono MR30 (2 pcs) |
1 x | Lock nut aluminium M2.5 (4 pcs) |
2 x | XH LiPo extension lead |
1 x | Lock nut M2.5 (10 pcs) |
2 x | Blue Aluminium lock nut M3 (4 pcs) |
1 x | Hexagonal Nut M1 (10 pcs) |
2 x | Wing conexion 2 servos Futaba 50 cm |
1 x | XT-30 connector (pair) |
2 x | XT-60 connector (female) |
2 x | Soldering PCBs 8pin, 5 pieces |
2 x | XH male balance (6S) connector (2 pcs) |
1 x | XT60 Connector with Holder Male 2pcs |
1 x | Flat washer 2.2 mm (20 pcs) |
1 x | XH female balance (7S) connector (2 pcs) |
2 x | XH female balance (9S) connector (2 pcs) |
2 x | Hexagonal Nut M1,6 (10 pcs) |
2 x | Wing conexion 2 servos JR/Graupner 50 cm |
1 x | XH male balance (9S) connector (2 pcs) |
2 x | Blue Aluminium lock nut M2 (4 pcs) |
1 x | XH female balance (8S) connector (2 pcs) |
1 x | XH male balance (4S) connector (2 pcs) |
1 x | Hexagonal Nut M3 (10 pcs) |
1 x | Lock nut aluminium M2 (4 pcs) |
2 x | Servo Connector Brackets (10 pcs) |
1 x | Hexagonal Nut M2.5 (10 pcs) |
1 x | DYNAMOMETER S-1580 |
1 x | Lock washer 4.3 mm (20 pcs) |
2 x | Lock washer 2.7 mm (20 pcs) |
2 x | Floating M4 washer pad (36 pcs) |
1 x | Angle measurer |
1 x | Propeller balancer |
1 x | 12,7x1000 mm 2:1 green termoretract tube |
1 x | 135 mm PVC transparent battery termo-retract 68 mm (1 m) |
1 x | 1,5x50 mm allen screwdriver |
1 x | 6,4x1000 mm 2:1 green termoretract tube |
1 x | 5 LiPo XH>EH adapter |
1 x | 1/6 Pilot "Cindy" |
1 x | Pilot "Adolf" Legends Series (Slimline) |
1 x | Sparkplug DLE CM6 |
1 x | 30 cm BEC cable (male) |
1 x | 2,5x60 mm allen screwdriver |
1 x | 105 mm PVC transparent battery termo-retract 68 mm (1 m) |
1 x | Militarian pilot "Kamikaze" size 9cm (Slimline) |
1 x | Pilot "Dick" Legends Series (Slimline) |
1 x | 1/4 Pilot "Mike" |
1 x | Civilian pilot "Joe" size 9cm (Slimline) |
1 x | Piston ring for DLE-55/111/222 |
1 x | Big Crow DLE-170M |
1 x | Motor 2212 (1000KV) Quadcopter F450 |
1 x | SkyMaxx 1.550 mm (kit) |
1 x | Jodel D.9 BeBe 2.400 mm Kit |
1 x | RX Battery Eneloop 6,0 V JR 2500 mAh |
1 x | Aluminun wheel collar 3 mm Ø (4 uds) |
1 x | PVC termo-retract battery 45 mm transparent orange (1 m) |
1 x | XH male balance (5S) connector (2 pcs) |
1 x | XH female balance (3S) connector (2 pcs) |
1 x | Carbon tube (L 1000 mm, Ø2 mm, Ø1 mm) |
1 x | ABS tube 20.0x18.0x1000 mm |
1 x | ABS tube 3.0x2.0x1000 mm |
1 x | Landing gear axle Ø 6 mm (2 uds) |
1 x | Carbon tube (L 1000 mm, Ø16 mm, Ø12 mm) |
1 x | Z-shaped servo mount |
1 x | Compact on-board starting system (9715) |
1 x | Carbon fiber rod 1.5 mm x 1000 mm |
2 x | Spring pin Ø 1 x 6 mm (10 pcs) |
1 x | Screw M2.5x20 (10 pcs) |
1 x | Aluminium cap bolt washer M3 red (8 pcs) |
1 x | Lock nut M3 (10 pcs) |
1 x | Socket Head Screw M2x5 |
1 x | Anodized alum. M4x0,7x20 mm Button Head screw (4 dark blue pcs) |
1 x | Connectors banna oro 4 mm (M/F) (ultralight) |
1 x | PIN Connector female (100 pcs) |
1 x | Anodized alum. M4x0,7x25 mm Button Head screw (4 blue pcs) |
1 x | Lock nut aluminium M3 (4 pcs) |
1 x | Connectors banna oro 2 mm (M/F) (ultralight) |
1 x | Connectors banna oro 8,0 mm (M/F) |
1 x | LightBox SR |
1 x | M3/5 Diam metal short ball link V3 (2 pcs) |
1 x | Aluminun wheel collar 4 mm Ø (4 uds) |
1 x | NoNa BB wheel Ø175x55mm in pair |
1 x | Round Rod 1,5x1000 mm |
1 x | ABS tube 7.0x5.0x1000 mm |
2 x | Landing gear axle Ø 8 mm (2 uds) |
1 x | Carbon tube (L 1000 mm, Ø14 mm, Ø12 mm) |
1 x | ABS tube 10.0x8.0x1000 mm |
1 x | AL Axle Shaft 4.0x16 mm (2 uds) |
1 x | ABS tube 12.0x10.0x1000 mm |
1 x | ABS tube 16.0x14.0x1000 mm |
1 x | Motor OS 3820-1200 electric |
1 x | MPX Sub-D Adaptor |
1 x | Aluminium wide washer M3 gold (4 pcs) |
1 x | Circlik for shaft 1.2 mm (10 pcs) |
1 x | Socket Screw M3x9 mm |
2 x | Anodized aluminium M3x0,5x20 mm Sokect Head screw (4 blue pcs) |
1 x | Kontronik connector (10 connectors, 5 pairs) |
1 x | Spring lock washer 3.1 mm (20 pcs) |
1 x | MPX screwable clips (4 pcs) |
1 x | Screw M3x8(10 pcs) |
1 x | Blind nut M6 (4 pcs) |
1 x | Conector BEC male (10 pcs) |
1 x | Aluminium wide washer M3 blue (4 pcs) |
1 x | Servo M2x7/16 screw (4 pcs) |
1 x | Spring lock washer 4.1 mm (20 pcs) |
2 x | XH female balance (2S) connector (2 pcs) |
1 x | Optotronix Aurora Plug |
1 x | EC5-Set female, simple quality, 2 x female pin, 1 x blue housing |
2 x | 100 Newtons FEMA absorber |
1 x | ABS tube 18.0x16.0x1000 mm |
1 x | ABS tube 5.0x4.0x156 mm |
1 x | ABS tube 9.0x8.0x1000 mm |
1 x | ABS tube 3.0x1.0x1000 mm |
1 x | ABS tube 4.0x2.0x1000 mm |
1 x | ABS tube 14.0x10.0x1000 mm |
1 x | ABS tube 9.0x7.0x1000 mm |
1 x | Carbon tube (L 1000 mm, Ø10 mm, Ø8 mm) |
1 x | Landing gear axle 4x21 4 mm (2 uds) |
1 x | ABS tube 5.0x4.0x1000 mm |
1 x | Landing gear axle Ø 4 mm (2 uds) |
1 x | Aluminium tube (L 1000 mm, Ø4.0 mm, Ø3.1 mm) |
1 x | Carbon tube (L 1000 mm, Ø16 mm, Ø14 mm) |
1 x | Carbon tube (L 1000 mm, Ø1.5 mm, Ø0.7 mm) |
1 x | ABS tube 6.0x5.0x1000 mm |
1 x | ABS tube 8.0x6.0x1000 mm |
1 x | ABS tube 7.0x6.0x1000 mm |
1 x | ABS tube 5.0x3.0x1000 mm |
1 x | ABS tube 2.0x1.0x1000 mm |
1 x | Aluminium tube (L 1000 mm, Ø7.0 mm, Ø6.1 mm) |
1 x | ABS tube 4.0x3.0x1000 mm |
1 x | Aluminium tube (L 1000 mm, Ø5.0 mm, Ø4.1 mm) |
1 x | Carbon fibre tube -TAPERED- 3k-PW (10 x 5 x 0.3) x 880 mm |
1 x | ABS tube 6.0x4.0x1000 mm |
1 x | Battery Protection Circuit Board 22.2v 6s |
1 x | Balsa panel 3.0x100x1000 mm |
1 x | Balsa panel 10x100x1000 mm |
1 x | Servo holder for retract |
1 x | Wheel FEMA 165 mm / 8 mm |
1 x | Wheel FEMA 140 mm / 6 mm |
1 x | Mudguard wheels 112/127 mm |
1 x | Servo arm with 5 mm hole to FEMA 9810A |
1 x | 150 Newtons FEMA absorber |
1 x | Compact on-board starting system (9713) |
1 x | Carbon fiber rod 6.0 mmx1000 mm |
1 x | Carbon fiber rod 12 mm x 1000 mm |
1 x | Pasacables rectangular 40x15 mm (4 pcs) |
1 x | Carbon fiber rod 1.5 mm x 1000 mm |
1 x | Carbon fiber rod 20 mmx1000 mm |
1 x | Carbon fiber rod 0.5 mmx1000 mm |
1 x | Carbon fiber rod 1.5 mm x 2000 mm |
1 x | 10 mm floating pad (72 pcs) |
1 x | Tapping Screw M2.2x9.5 (10 pcs) |
1 x | Anodized alum. M4x0,7x20 mm Flat Head screw (4 lilac pcs) |
1 x | Screw M3x20 (10 pcs) |
1 x | Titanium M3x0,5x8 mm Flat Head screw (4 pcs) |
1 x | Bag connector 2 mm |
1 x | Spring lock washer 2.6 mm (20 pcs) |
1 x | Aluminium cap bolt washer M4 red (8 pcs) |
1 x | Lock nut M5 (20 pcs) |
1 x | Aluminium wide washer M3 red (4 pcs) |
1 x | Connectors banna oro 6,0 mm (M/F) |
1 x | Pan head screw M2x16 PH |
1 x | Socket Head Screw M2x12 |
1 x | Threaded insert M3 (4 pcs) |
1 x | Blind nut M2 (10 pcs) |
1 x | Aluminium wide washer M4 Red (4 pcs) |
|
5,626.07EUR |