1 x | Hovercraft sailcloth |
1 x | Protective Cover for wires Ø 3 mm 1000 mm |
1 x | Rubber profile 6-2 mm 2M |
1 x | CM-3 |
1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 100 m |
1 x | 37 mm PVC transparent battery termo-retract (1 m) |
1 x | Cable set PREMIUM, SUB-Done 4three fuselage/wing 160 cm |
1 x | ABS "T" angle 6.0x6.0x1000 mm |
1 x | Cross Connector 4.0 mm x 1000 mm |
1 x | Adapter lead MPX/EC3 |
1 x | 165 mm PVC transparent battery termo-retract 165 mm (1 m) |
1 x | 100m servo "Premium" wire (white/red/blue) |
1 x | Glases Ace |
1 x | Zurich Sport Sunglasse Dark Sensity BROWN Glasses |
1 x | 1,6x1000 mm 2:1 black termoretract tube |
1 x | Aluminium cap bolt washer M4 green (8 pcs) |
1 x | Nylon hinge for flaps/gates 27x10,5 (2 pcs) |
1 x | Carbon fibre sandwich sheet 350x150x3 mm |
1 x | XH male balance (2S) connector (2 pcs) |
1 x | Wing-connector: Glass / Carbon tube (26.5/25 x 25/23) x 1000 mm |
1 x | Digital Air Speed Sensor And Pitot Tube Set |
1 x | Plasti Dip Liquid Tape 429 ml black |
1 x | Joint with bearing M3 22x5,5 |
1 x | Aluminum Bayonet / strongal D12 mm / 0.5 m |
1 x | 2 mm female connector (2 pcs) with safety connector |
1 x | |
1 x | Spray Graphit 33 |
1 x | Support Pitot JETI |
1 x | M3 Maxi ball link (2 uds) |
1 x | Plasti Dip Liquid Tape 429 ml black |
1 x | Painting GHT Lexan Black 150 ml |
1 x | Clevis plastico I=44 mm / hole 3mm / pin 2 (2 pcs) |
1 x | Kwik link AL M3 L:23 mm (2 pcs) + Pin Ø 1,6 mm |
1 x | RH long aluminium horn (2pcs) |
1 x | Xplorer2 anemometro |
3 x | Yellow smoke canister 65 g |
2 x | Horn 6/20 with M3 Bearing |
1 x | "S" set for planes |
1 x | Pilot "Goose" (Slimline) |
1 x | Yellow smoke canister 100 g |
2 x | Small aluminium horn gold (2pcs) |
1 x | Aluminium coupler M2,5/2 with ball bearing (1 pcs) |
1 x | Brass ball links BS M3 V1 (10 pcs) |
1 x | White smoke canister 65 g |
1 x | Threaded coupler M2,5 Ø 2 mm (10 pcs) |
1 x | White smoke bombs AX-60 (5 pcs) |
1 x | Xplorer4 anemometro |
1 x | 1/12 Pilot "Tom" |
1 x | Threaded coupler ALU M3 Ø 4 (2 uds) |
1 x | Ball Link ALU M3 - RH (1 pcs) |
1 x | Mahogany wood slat 1.5x1.5x1000 mm |
1 x | Straightened rod Ø 5.0 mm x 1000 mm |
1 x | Straightened rod Ø 0.8 mm x 1000 mm |
1 x | Mahogany wood slat 3.0x3.0x1000 mm |
1 x | Beech dowels 10 mm x 1000 mm |
1 x | Brass rod Ø 0.8 mm x 1000 mm |
1 x | Walnut wood slat 1.5x1.5x1000 mm |
1 x | Straightened rod Ø 4.5 mm x 1000 mm |
1 x | Straightened rod Ø 1.5 mm x 1500 mm |
1 x | Straightened rod Ø 1.0 mm x 1000 mm |
1 x | Liston HAYA 8 x 8 x 1000 mm |
1 x | Pine wood slat 2.0x10.0x1000 mm |
1 x | Straightened rod Ø 8.0 mm x 1000 mm |
1 x | Pine wood slat 3.0x7.0x1000 mm |
1 x | APM2.6 Power module with 5.3V DC BEC |
1 x | La Capitania di Venetia accesories |
1 x | 6 mm Prop Adapter M8 |
1 x | 2,3 mm Prop Adapter M6 |
1 x | 3 mm Prop Adapter M6 |
1 x | Aero-Master Wings (Aero-naut) |
1 x | Tirpiz Battleship 1:200 |
1 x | 2.3 mm Adapter for 30 mm spinners |
1 x | 3.2 mm Prop Adapter M8 |
1 x | 3,2 mm Prop Adapter M6 |
1 x | 2,3 mm Prop Adapter M6 |
1 x | ZEUS F3A 2m |
1 x | Fiberglass plate 350x150x2.5 mm |
1 x | Foam plastic plates (310x210x8 mm) |
1 x | Fiberglass plate 350x150x3.0 mm |
1 x | Carbon plate 550x350x2.5 mm ECOTECH |
1 x | DPS Switch JR/JR |
1 x | 5 mm Prop Adapter M8 |
1 x | 6 mm Prop Adapter M8 |
1 x | 4 mm Prop Adapter M8 |
1 x | 5 mm Prop Adapter CN-Spinner |
1 x | Prop Shaft Adapter 6 mm/M8 "long" 35 mm |
1 x | Aro pasacable Ø20 mm (4 pcs) |
1 x | Long extra-strong control horn with bearing 2,8x34 |
3 x | Short extra-strong control horn with bearing 2,8x15 |
1 x | Horn F3A de Titanium 16 mm (2 units) |
2 x | Set Threaded coupler ALU M2,5 Ø 4 (2 uds) |
2 x | Rudder forward 90x28 "type Kato" |
2 x | Long adjustable aluminium control horn with bearing 2,8x15 |
1 x | Adjustable brass horn threaded M3 |
2 x | 5 mm M2 variable inclined horn |
1 x | Medium extra-strong control horn with bearing 2,8x24 |
1 x | Axi for MVVS 3.5 Sport |
1 x | Support XT60 conector (2 pcs) |
1 x | Soporte grifo FESTO vertical (1 pcs) |
1 x | Soporte filtro FESTO (4 pcs) |
1 x | Support Filtro FESTO |
1 x | Tapa estado carga XT-60 (6 pcs) |
1 x | Support pumb/filter Xicoy X45 |
1 x | Support pump Xicoy X45 |
1 x | Support ECU Xicoy X-45 |
1 x | Aro pasacable Ø25 mm (4 pcs) |
1 x | Tube support Ø 6mm (10 pcs) |
1 x | Support FUEL DOT V3 |
1 x | Support Flush MPX Conector (6 pcs) |
1 x | 5 mm M2 variable horn |
1 x | Control horn long w/ball |
3 x | Small control horn with bearing (2 pcs) |
2 x | Rudder forward 80x28 "type Kato" |
3 x | Long adjustable control horn with bearing |
3 x | Horn DUBRO 1/2A |
3 x | Long horn 50x26 |
2 x | Brass control horn M2 large for wire (2pcs) |
3 x | Extra long horn 60x30 |
2 x | Indoor hinge with servo arm integraded |
1 x | 6 mm M3 variable inclined horn |
3 x | Small adjustable aluminium control horn with bearing 2,8x15 |
1 x | Long adjustable aluminium control horn 2,8x24 |
2 x | Small adjustable control horn with bearing |
1 x | Brass control horn M2 long for wire (10pcs) |
2 x | 6 mm M3 variable horn |
1 x | Long adjustable control horn 3x34 |
1 x | Horns indoor |
2 x | Extra-long adjustable aluminium control horn 2,8x34 |
1 x | Horn micro type4 Ø 0,5 (2 pcs) |
1 x | Horn DU-BRO 1/2 (2 pcs) |
1 x | Horn mando long (2 pcs) |
2 x | Duralumium F3A horn 30x10x23,5 mm (2 pcs) |
1 x | Micro control horn T2 Ø 1 |
1 x | Angle measurer |
1 x | Field folding model stand |
1 x | Truck-trailer for gliders 720 x 285 mm |
1 x | WingFix ULTRA Black Edition |
1 x | Propeller balancer |
1 x | Propeller balancer |
1 x | Angle of incidence meter |
1 x | Radial mount for electric 2.5-5.6 |
1 x | Motor MVVS 5.6/690 GLIDER |
1 x | Motor A50-12 L V4 |
1 x | Motor A200-8 |
1 x | FesEx-Uni6 System |
1 x | Shaft for A60-XS-V2 (112,5mm) |
1 x | Motor A10-7 L 4,4:1 |
1 x | Motor A30-12 L V4 |
1 x | PH5 adapter for 5mm M8 axi for AXI2820 y 2826 |
1 x | Frontal Adapter for AXI53xx |
1 x | Motor A60-6XS V4 28-pole kv370 |
1 x | Motor A50-14L Turnado V3 Glider |
1 x | FesEx-Uni8 System |
1 x | Motor A20-22 L EVO |
1 x | Motor A30-12 XL Glider |
1 x | 6 mm Prop Adapter M8 |
1 x | 5 mm Prop Adapter M6 |
1 x | 5 mm Prop Adapter M8 |
1 x | 19.5x13 Falcon electric 3-Blade carbon prop (54 g) |
1 x | Landing gear Rocket 400 |
1 x | Carbon plate 350x150x2.5 mm |
1 x | Glass fabric 49 g/m² (Finish FE 800, plain) 110 cm x 20m |
1 x | Glass fabric tape 49 g/m² (Interglas 02037, finish FE 600/800, p |
1 x | Glass fabric tape 225 g/m² (Silane, plain) 40 mm |
1 x | Glass fibre sleeve Ø 20 mm X 10m |
1 x | Junta selladora, Tacky Tape Gris 2.75mmx12mmx15m |
1 x | Pine wood slat 5.0x5.0x1000 mm |
1 x | Propeller mounting nuts Black / Silver Rocket 400 or Phatom simi |
1 x | Carbon blade 230 mm |
1 x | CellPRO 4S Adaptader (GP/KO up to 4S) |
1 x | Glass fabric 80 g/m² (FK 144, twill weave) 100 cm, pack/ 5 m |
1 x | Glass fabric 49 g/m² (1,27 x 10 m) |
1 x | Peel ply 95 g/m² (plain weave) 20 mm x 100 m |
1 x | Glass fabric 80 g/m² (plain) 100 cm, roll/ 20 m Aero Finish |
1 x | Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 100M |
1 x | Glass fabric 49 g/m² (1,27 x 5 m) |
1 x | Panel Honeycom carbon 350x150x3.5mm |
1 x | Glass fabric 425 g/m² aero,10x1m |
1 x | Peel ply 93 g/m² (plain weave) 150 cm x 5m |
1 x | Glass fabric 49 g/m² (Finish FE 800, plain) 110 cm x 3m |
1 x | Glass fabric 80 g/m² (twill) 100 cm x 50m |
1 x | PET film Mylar® A 350, 50 cm, roll/ 5 m |
1 x | Peel ply 64 g/m² (plain weave) 150 cm x 20m |
1 x | Glass fabric 49 g/m² (Finish FE 800, plain) 110 cm x 1m |
1 x | Peel ply 95 g/m² (plain weave) 100 mm x 100 m |
1 x | Glass fibre braided sleeve (45mm) roll 10m |
1 x | Glass fabric 80 g/m² (plain) 100 cm, roll/ 20 m |
1 x | Glass fabric 80 g/m² (silane, twill) 100 cm x 10m |
1 x | Peel ply 64 g/m² (plain weave) 150 cm x 10m |
1 x | PET film Mylar® A 350, 50 cm, roll/ 2 m |
1 x | Glass fabric 80 g/m² (FK 144, twill weave) 100 cm, pack/ 1 m |
1 x | Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 50M |
1 x | Glass fabric tape 225 g/m² (Silane, plain) 40 mm X 100m |
1 x | Glass fabric 390 g/m² (silane, twill) 100 cm x 20m |
1 x | Straightened rod Ø 2.0 mm x 1000 mm |
1 x | Straightened rod Ø 1.5 mm x 1000 mm |
1 x | Hard brass tubing (L 1000 mm, Ø2.0 mm, Ø1.2 mm) |
1 x | Ply-Span 450x600/13g White |
1 x | ABS 500 x 400 x 0,5 mm (white) |
1 x | Ply-Span 450x600/13g Blue |
1 x | 1/6 Pilot "John" |
1 x | Giant Scale Muffler D.A. 70 |
1 x | Red smoke canister 140 g |
1 x | White smoke canister 140 g |
1 x | AXI 2808/24 V2 Long |
1 x | AXI 2814/12 V2 Long |
1 x | AXI 2820/14 V2 |
1 x | AXI 2808/16 V2 Long |
1 x | AXI 2820/10 V2 |
1 x | AXI 2826/10 V2 |
1 x | AXI 2808/20 V2 Long |
1 x | AXI 2808/24 V2 |
1 x | AXI 2814/10 V2 |
1 x | AXI 2814/6D V2 |
1 x | AXI 4120/18 V2 |
1 x | Horn with ball 40x30 |
1 x | Cable with accesories |
1 x | Threaded coupler ALU M2 Ø 3 (2 uds) |
1 x | Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 7 mm |
1 x | 20 mm carbon horn |
2 x | 9x4.7 * 22x12 carbon propeller |
1 x | Militarian pilot "Kamikaze" size 9cm (Slimline) |
1 x | AXI 2826/6 V2 Long |
1 x | Carbon Non-Woven, 160 g/m² 100 cm 25 m |
1 x | resin-hardener L-385 H-385 (5000 g) |
1 x | Spray YELLOW Inca Lexan 150ml |
1 x | Horn 20x28,5 mm (2 pcs) |
1 x | Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch 5 m |
1 x | Cable control set |
1 x | Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 6 mm |
1 x | M2/M1/6 3Diam long black ball link V1 (6 pcs) |
1 x | F1 Prop Cap Can (Fuel Container Conection) |
1 x | Pilot "Anthony" (Slimline) |
1 x | Civilian pilot "Gramps" size 9cm (Slimline) |
1 x | Compact Pitts Muffler OS MAX.35.40 FP |
1 x | Civilian pilot "Pamela" size 9cm (Slimline) |
1 x | Civilian pilot "G-Man" size 9cm (Slimline) |
1 x | Motor OS 3820-1200 electric |
1 x | AXI 2204 Multicopter |
1 x | AXI 2826/10 V2 Long |
1 x | AXI 2808/16 V2 |
1 x | AXI 2814/16 V2 |
1 x | AXI 2814/12 V2 |
1 x | AXI 2820/14 V2 Long |
1 x | AXI 2826/12 V2 |
1 x | 8 mm Adapter for AXI53xx |
1 x | AXI 2814/20 V2 Long |
1 x | AXI 2826/8 V2 |
1 x | AXI 2820/10 V2 Long |
1 x | AXI 2820/12 V2 Long |
1 x | AXI 2820/8 V2 |
1 x | AXI 2217/20 V2 Long "F5J" |
1 x | AXI 2820/12 CYCLONE |
1 x | AXI 2814/10 V2 Long |
1 x | AXI 2814/20 V2 |
1 x | AXI 2820/8 V2 Long |
1 x | AXI 2826/8 V2 Long |
1 x | Bidule 111 3000 mm |
1 x | Albatros ,spare cockpit (Top Model) |
1 x | Electric spoiler 440 mm (2 pcs) |
1 x | Program Card G2 RAY |
1 x | ESC RAY G2 R-20B BEC |
1 x | Transmitter Cadet 4Ch (V3) 2,4 GHz Mod.2 |
1 x | FOXY G2 C3530-700 |
1 x | ESC RAY G2 R-60SB SBEC |
1 x | Aluminium tube with fibreglass case ø35x1.5mm, 1m |
1 x | Bidule 55 2460 mm Cabina |
1 x | Aluminium tube with fibreglass case ø35x1.5mm, 500mm |
1 x | Avia (Top Model) |
1 x | PVC 0,14 qmm servos wire Hitec/Mpx (5 m) |
1 x | Conector BEC female (10 pcs) |
1 x | Connectors banna oro 3,5 mm (M/F) |
1 x | Connectors banna oro 3 mm (M/F) |
1 x | USB Adaptor OPTronics |
1 x | Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch |
1 x | Threaded coupler ALU M3 Ø 6 (2 uds) |
1 x | Micro control horn (2 pcs) |
1 x | Brass control horn M2 short for wire (2 pcs) |
1 x | Short adjustable control horn 3x24 |
1 x | Horn 5/10 with M2 Bearing |
1 x | Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch 7 m |
1 x | Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 5 mm |
|
15,753.52EUR |