2 x | Softshell Hispano Aviación |
2 x | Vest clothes Hispano Aviación |
1 x | Rocket cardboard tube 25mm x 24mm x 230mm |
2 x | Rocket cardboard tube 50mm x 48mm x 250mm |
1 x | 14x60 mm Mini rings Tie Wraps (4 pcs) |
1 x | ROBB1-F1959 |
1 x | Nylon hinge for flaps/gates 27x10,5 (2 pcs) |
1 x | Pin type hinge Al 3,0x50 mm (2 pcs) |
1 x | Canopy Lock V1 M3 Blue (2 pcs) |
1 x | Screw-lock connector M2 (2 uds) |
1 x | EDF Jet-Flex 80 - 8 kg |
1 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m |
1 x | Emisora FUTABA T18 SZ + R7208SB |
1 x | Carbon fiber rod 2.5 mmx1000 mm |
2 x | Threaded coupler ALU M2,5 Ø 3 (2 uds) |
1 x | Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m |
2 x | Threaded coupler ALU M2 Ø 4 (2 uds) |
2 x | Carbon fiber rod 10 mm x 1000 mm |
1 x | Threaded coupler M3 (10 uds) |
1 x | Aluminium wide washer M4 Black (4 pcs) |
1 x | Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 50M |
1 x | Aluminium coupler M2/2 with ball bearing (1 pcs) |
2 x | Carbon fiber flat 1000x3.0x0.13 mm |
1 x | Stainless steel cable Ø 0.62 mm (10 m) |
1 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m |
1 x | Carbon fiber rod 4.0 mmx1000 mm |
1 x | FUTABA 6L + R3106 2.4GHz |
1 x | Steering arm 16 mm Ø 4 mm (2 uds) |
1 x | Cap Hispano Aviación |
1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m |
1 x | Aluminium wide washer M3 gold (4 pcs) |
1 x | JETFAN JF80 + motor HET 700-68-2100 Kv |
1 x | Futaba S-Bus Rx/Gyro Link Lead |
1 x | Pine wood slat 2.0x10.0x1000 mm |
1 x | JETI Counter for DC-16 (Blue) |
1 x | Transmitter Balancer HITEC Aurora 9, JR and Spectrum (blue) |
2 x | Switch Button DS Tx DUPLEX |
1 x | Maleta transporte FUTABA 10PX |
2 x | Soporte filtro FESTO (4 pcs) |
1 x | Hand Pads for Tray JETI |
1 x | Cable silicona macho batt. receptor 30 cm (Futaba) |
1 x | Premium servo extension 25cm |
1 x | Pine wood slat 3.0x10.0x1000 mm |
1 x | Extinguisher CO2 - 2 Kg |
1 x | Pilot JAN 1/4 Saiplanes |
1 x | EDF 60/15 Mk.2 MEga |
1 x | Extension S-Bus 1-2 silicon 30 cm FUTABA |
1 x | 3,0x60 mm allen screwdriver |
1 x | ABS Strip 1.0x2.0x1000 mm |
1 x | Round Rod 1,0x1000 mm |
1 x | Crimping tool |
2 x | Round Rod 1,25x1000 mm |
1 x | |
1 x | PROXXON - SANDING BELTS FOR BSL 220/E 180 GRIT (5 pcs) |
1 x | JETI transmitter DC-14 II Green Multimode |
1 x | Emisora JETI Duplex DS-12 EX Special Edition "Carbon Purple" |
1 x | Strip ABS 2.0x5.0x1000 mm |
1 x | Emisora JETI Duplex DS-16 II Carbon Line YELLOW |
1 x | JETI handheld transmitter DS-14 II Blue Multimode |
1 x | Steel tube (L 1000 mm Ø5 mm, Ø4,7 mm) |
1 x | Starter 12v (Max 180 and 30ccm) |
2 x | Strip 2,0x2,0x330 mm |
1 x | Screwdriver for Torx® TX8 |
1 x | ABS tube 3.0x2.0x330 mm |
1 x | ABS tube 12.0x10.0x1000 mm |
1 x | Digital precision scale up to 2000 g |
1 x | Copier 2x20 cm pcs |
3 x | Round Rod 4,0x1000 mm |
1 x | JETI transmitter DC-14 II Red Multimode |
1 x | PROXXON - SILICON CARBIDE BELTS FOR BSL 220/E |
1 x | Vacuum Connection VA 1 (for hose Ø 6 mm) |
2 x | Dust collector for mould cleaning |
1 x | CF tube set (Ø 38 mm y Ø 14 mm) |
1 x | Transmitter JETI Duplex DS-12 EX Special Edition |
1 x | Rocket D3-P |
1 x | Wing Joiner ULTIMATUM 2.0 m |
1 x | 5.8G Receiver Helical Antenna with protecting case (SMA plug) 12 |
2 x | Charger ISDT 608AC 200W |
2 x | LASER 260 60" V2 ARF Red (SkyWing) |
2 x | EXTRA NG 85" 2159mm red/white |
1 x | Canopy hinges for Discus 2c, Discus 2a, Ventus 2cx (2pcs) |
1 x | Ø 1,6 mm pin for Kwik link MPJ2150/2157 (6 pcs) |
1 x | Carbon fiber rod 1.5 mm x 2000 mm |
1 x | Pulley brass 12/2 (2 pcs) |
1 x | Carbon fiber flat 1000x3.0x0.5 mm |
1 x | Carbon fiber rod 8.0 mmx1000 mm |
1 x | Carbon fiber rod 0.8 mmx1000 mm |
1 x | Clevis plastico I=44 mm / hole 3mm / pin 2 (2 pcs) |
1 x | Carbon fiber rod 20 mmx1000 mm |
1 x | Carbon fiber rod 0.5 mmx1000 mm |
1 x | Aluminum Bayonet / strongal D35 mm / 1 m |
1 x | Extension silicon 30 cm female (Futaba) |
1 x | Extension silicon 10 cm (Futaba) |
1 x | Extension silicon 100 cm (Futaba) |
1 x | 200 mm extensión servo HITEC/JR |
1 x | Extension silicon 35 cm (Futaba) |
1 x | Support FUEL DOT V3 |
1 x | servo adapter lead, JST-SH socket - JR male Pin, for GR-12SH+HoT |
1 x | Support Pitot JETI |
1 x | Extension silicon 50 cm (Futaba) |
1 x | PROXXON - SANDING BELTS FOR BSL 220/E 120 GRIT (5 pcs) |
1 x | Linden wood slat 2.0x2.0x1000 mm |
1 x | Hot Glue Stick GREEN |
1 x | Fresa corte diamante Ø 2.35mm (flame) |
1 x | Spinner Alumin. fixed propeller 40 mm / 4,0 mm |
1 x | Tray JETI for DS-14/16/24 Black |
1 x | Chopped glass fibre strands 3 mm |
1 x | Carbon Non-Woven, 240 g/m² 100 cm x 5m |
1 x | Carbon plate 1000x500x2,0 mm ECOTECH |
1 x | Fiberglass 163 g/m² 1m x 50 m (Aero, finish FK 144, plain) |
1 x | Carbon plate 350x150x5.0 mm |
1 x | Fiberglass 163 g/m² 1m x 20 m (Aero, finish FK 144, plain) |
1 x | Vasa model Catapult |
1 x | Bungee HLG Premium |
1 x | EDF Jet-Flex 80 - 8 Kg |
1 x | Set EDF Mini Avanti Full Aluminium |
1 x | EDF Ducted Fan JP Hobby 105mm + 12s Motor 875KV (CW) |
1 x | Threaded coupler ALU M3 Ø 5 (2 uds) |
1 x | Porta Kwik link M4 4 mm (2 pcs) |
1 x | Pulley brass 8/2 (2 pcs) |
1 x | Carbon fiber rod 14 mmx1000 mm |
1 x | Z type of cable coupler Ø 1.8 (2 uds) |
1 x | Kwik link with arm M5xM2,5xL30 |
1 x | Carbon fiber rod 2.0 mmx1000 mm |
1 x | Carbon fiber rod 1.0 mm x 1000 mm |
1 x | Carbon fiber rod 1.5 mm x 1000 mm |
1 x | Pulley brass 10/2 (2 pcs) |
1 x | Carbon fiber rod 6.0 mmx1000 mm |
1 x | Z type of cable coupler Ø 2 (2 uds) |
1 x | Antenna MULTIPLEX 2.4 GHz 400mm RX-9/12/16-DR pro |
1 x | Carbon fiber flat 1000x6.0x0.8 mm |
1 x | Carbon fiber flat 1000x3.0x1.0 mm |
1 x | Carbon fiber rod 5.0 mmx1000 mm |
1 x | Cable coupler M2,5 (2 pcs) |
1 x | Pulley brass 2,5/1 (2 pcs) |
1 x | Ø 1,6 mm pin for Kwik link MPJ2160/2161 (6 pcs) |
1 x | Carbon fiber rod 12 mm x 1000 mm |
1 x | Crimping sleeves for 1.1 mm cable (10 pcs) |
1 x | Pulley brass 6/1,5 (2 pcs) |
1 x | M4xM2,5xL30 nylon clevis and arm (10 uds) |
1 x | Threaded coupler Micro M2 Ø 0,8 mm (10 pcs) |
1 x | Carbon fiber flat 1000x3.0x1.0 mm |
1 x | Pulley brass 5/1,5 (2 pcs) |
1 x | Ø 2,5 mm pin for Kwik link MPJ2170/2173 (6 pcs) |
1 x | Threaded coupler ALU M3 Ø 6 (2 uds) |
1 x | Wingstabi 9 DR M-Link Receiver |
1 x | Micro clevis (10 uds) |
1 x | Carbon fiber rod 7.0 mmx1000 mm |
1 x | Aluminum Bayonet / strongal D12 mm / 0.5 m |
1 x | Shirt Hispano Aviación |
1 x | Extractor piñones 2.3/3.2 mm |
2 x | Aluminium tube with fibreglass case ø35x1.5mm, 1m |
1 x | Support Antena 2.4 Ghz (2 pcs) |
1 x | Aro pasacable Ø25 mm (4 pcs) |
1 x | Support pumb/filter Xicoy X45 |
1 x | Support pump Xicoy X45 |
1 x | Support Filtro FESTO |
1 x | Prolongador S-Bus JR/JR 10cm |
1 x | Soporte grifo FESTO (2 pcs) |
1 x | Circlick securite |
1 x | Extension silicon 30 cm male (Graupner) |
1 x | Extension 15 cm (Futaba) |
1 x | Extension PVC 150 cm (Graupner) |
1 x | Cable silicona female batt. receptor 30 cm (Futaba) |
1 x | Extension 7.5 cm |
1 x | Cabel "Y" 30 cm (graupner) |
1 x | Futaba Female 40 cm extension |
1 x | Extension silicon 50 cm (Graupner) |
1 x | Pine wood slat 10x10x1000 mm |
1 x | Tray JETI for DS-12 Black |
1 x | Pine wood slat 2.0x2.0x1000 mm |
1 x | Screws of the Back Cover for DC Tx (10pcs.) |
1 x | Mahogany wood slat 3.0x3.0x1000 mm |
1 x | Set brocas Ø 1.5-2.0-2.5-3.0 mm (4 pcs) |
1 x | BALSA trip 2.0x2.0x1000 mm |
1 x | Precision wrench L100 mm |
1 x | Pine wood slat 5.0x5.0x1000 mm |
1 x | PPM to Jack link - Tx Black (mono) DC/DS Tx DUPLEX 2,4EX |
1 x | Universal Filter |
1 x | Set brocas Ø 1.2-1.4-1.6-1.8 mm (4 pcs) |
1 x | OBECHI sheet 2.0x3.0x1000 mm |
1 x | Concave-Convex sandpaper file 13 mm |
1 x | JETI Counter for DC-24 Carbon Design 3 |
1 x | Liston HAYA 8 x 8 x 1000 mm |
1 x | switch short 3-position DS Tx DUPLEX 2,4EX |
1 x | DUPLEX 2,4EX Stick with 2-Position Switch for Transmitter DC/DS |
1 x | PPM to Jack link - Tx Black (mono) DC/DS Tx DUPLEX 2,4EX |
1 x | RC Power Switch 5A |
1 x | Spinner Alumin. fixed propeller 30 mm / 3,0 mm |
1 x | Spinner NUT M8x1,25 |
1 x | Strip 2,5x1,25x330 mm |
1 x | Strip ABS 2.0x8.0x1000 mm |
1 x | BALSA trip 6.0x6.0x1000 mm |
1 x | Harness for transmitter JETI DUPLEX |
1 x | EXTRA NG 74" white/red/blue (Skywing RC) |
1 x | Round Rod 3,0x1000 mm |
1 x | ABS Strip 1.5x8.0x1000 mm |
1 x | ABS I Strip 10x5x1000 mm |
1 x | Strip ABS 2.0x3.0x1000 mm |
1 x | Antenna holder bracket double |
1 x | Round Rod 2,5x1000 mm |
1 x | ABS Strip 1.0x5.0x1000 mm |
1 x | Round Rod 1,5x1000 mm |
1 x | ABS Strip 1.0x3.0x1000 mm |
1 x | Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm) |
1 x | PARTALL® Hi-Temp Wax, 340 g |
1 x | Universal Colour Paste signal white (RAL 9003) 1 Kg |
1 x | 4 LiPo XH>EH adapter |
1 x | Horn F3A de Titanium 16 mm (2 units) |
1 x | Ball Bearing Oil 25 ml |
1 x | SLICK 360-A 104" (2640 mm) |
1 x | Fast'n EZ-CA-Hinge (12 uds) |
2 x | ANGEL 48" pp red/blue/white |
1 x | 20,5x14,5 Falcon electric V2 (40 g) |
1 x | FALCON 24X12 CARBON PROPELLER (GAS) |
1 x | Brass rod Ø 0.5 mm x 1000 mm |
1 x | Straightened rod Ø 4.0 mm x 1000 mm |
1 x | Straightened threaded rod M2-1m |
1 x | Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH |
1 x | DPS Switch JR/JR |
1 x | Brass control horn M2 large for wire (2pcs) |
1 x | 6 mm blue aluminium threaded horn with patella |
1 x | Nitroverdu 500 ml |
1 x | APM2.6 Power module with 5.3V DC BEC |
1 x | 30 cm BEC cable (female) |
1 x | DPSI Ampere battery backer |
1 x | CC 02 |
1 x | Propeller POWER-PROP 14x9 |
1 x | LASER 73" 1.85m (05) PILOT |
1 x | 20-25mm Servo Arm |
1 x | Servo Arm 25T M3 KAVAN 6.5 / 19.6 mm |
1 x | Pilatus PC-21 50E RED/WHITE (SebArt) |
1 x | Fundas para el transporte F3A alas |
1 x | Pilatus PC-21 50E BLUE/WHITE (SebArt) |
1 x | EDGE 540-A 91" (2310 mm) |
1 x | EDGE 540-A 105" (2660 mm) |
1 x | SLICK 360-B 104" (2640 mm) |
1 x | LASER 260 60" V2 ARF Yellow (SkyWing) |
1 x | EDGE 540-A 74" (1880 mm) |
1 x | ARS 300 91" ARF 2311mm ORANGE |
1 x | 20x15 Falcon electric V2 |
1 x | FALCON 24X10 CARBON PROPELLER (GAS) |
1 x | FALCON 33X11W CARBON PROPELLER (GAS) |
1 x | Oracover Black 10 m |
1 x | FALCON 26X10 CARBON PROPELLER (GAS) |
1 x | Oratex Yellow Cub 10 m |
2 x | Peel ply 64 g/m² (plain weave) 150 cm x 10m |
2 x | Glass fabric 80 g/m² (FK 144, twill weave) 100 cm, pack/ 5 m |
1 x | Glass fabric 49 g/m² (Finish FE 800, plain) 110 cm x 3m |
1 x | Glass fabric 49 g/m² (Finish FE 800, plain) 110 cm x 20m |
1 x | Propeller APC 10x4.7 |
1 x | Mold plugs XT-30 |
1 x | Ball link Aluminio M3 (6 uds) 27x11.9x5.9 mm |
1 x | Aluminium red ball links M3 V1 (10 pcs) |
1 x | Pistola termica MH 550 micro |
1 x | F1 Prop Cap Can (Fuel Container Conection) |
1 x | Threaded coupler Micro M2 Ø 0,8 (10 pcs) |
1 x | Threaded coupler ALU M2,5 Ø 4 (2 uds) |
1 x | 55% silver electrodes (2 pcs) |
1 x | Heli blades angle measurer |
1 x | Dremel PERMAGRIT 18 mm round lime |
1 x | Propeller diller for DLE30/DLE35RA/DLE40/DLE55/DLE61/EME 55/DA-5 |
|
30,430.85EUR |