2 x | EC5-Set female, simple quality, 2 x female pin, 1 x blue housing |
1 x | XH male balance (5S) connector (2 pcs) |
1 x | Conector BEC female (10 pcs) |
2 x | Connectors DEANS (T) |
2 x | XH female balance (5S) connector (2 pcs) |
2 x | XH female balance (3S) connector (2 pcs) |
1 x | Conector AS150 7mm antichispazo (Set: 2 pares) |
2 x | EC5-Set male, simple quality, 2 x female pin, 1 x blue housing |
1 x | Connectors banna oro 4 mm (M/F) |
2 x | Gold antispark 4 mm plug |
1 x | XH female balance (4S) connector (2 pcs) |
2 x | XH male balance (3S) connector (2 pcs) |
2 x | Gold antispark 5,5 mm plug |
1 x | Connectors banana oro 6,0 mm Ultralight (M/F) |
3 x | Connectors banna oro 8,0 mm 5 pcs(Female) |
1 x | Conector BEC male (10 pcs) |
1 x | 30 cm DEANS female connector |
1 x | Connectors banna oro 6,0 mm (M/F) |
1 x | 2 mm female connector (2 pcs) with safety connector |
1 x | Banna gold connector 2,5 mm (M/F) |
1 x | Connectors banna gold 5,5 mm (M/F) |
1 x | Connectors banna oro 4 mm (M/F) (ultralight) |
1 x | Connectors banna oro 2 mm (M/F) |
1 x | Connectors banna oro 2 mm (M/F) (ultralight) |
1 x | Walnut wood slat 2.0x2.0x1000 mm |
1 x | BALSA trip 2.0x10.0x1000 mm |
2 x | Pine wood slat 1.5x3.0x1000 mm |
2 x | Pine wood slat 3.0x7.0x1000 mm |
3 x | Pine wood slat 2.0x10.0x1000 mm |
2 x | Linden wood slat 2.0x2.0x1000 mm |
3 x | Walnut wood slat 1.5x1.5x1000 mm |
2 x | BALSA trip 5.0x5.0x1000 mm |
3 x | BALSA trip 3.0x5.0x1000 mm |
3 x | Beech dowels 3.0 x 1000 mm |
3 x | Liston HAYA 3 x 10 x 1000 mm |
2 x | BALSA trip 6.0x6.0x1000 mm |
3 x | Liston HAYA 10 x 10 x 1000 mm |
2 x | BALSA triangular 8x8x1000 mm |
2 x | Linden wood slat 3.0x3.0x1000 mm |
3 x | Liston HAYA 8 x 8 x 1000 mm |
1 x | Pine wood slat 3.0x10.0x1000 mm |
1 x | BALSA trip 2.0x2.0x1000 mm |
1 x | Beech dowels 10 mm x 1000 mm |
2 x | Pine wood slat 5.0x5.0x1000 mm |
1 x | BALSA trip 3.0x3.0x1000 mm |
1 x | Thinwall Stainless Steel Tubing 28x0.6x1000 mm |
1 x | ABS tube 3.0x2.0x330 mm |
1 x | ABS tube 16.0x14.0x1000 mm |
1 x | ABS tube 5.0x4.0x156 mm |
1 x | ABS tube 3.0x2.0x1000 mm |
1 x | CF tube (L 1000 mm Ø0,7 mm, Ø0,3 mm) |
1 x | Steel tube (L 1000 mm Ø9 mm, Ø8,7 mm) |
1 x | Aluminium tube (L 1000 mm, Ø7.0 mm, Ø6.1 mm) |
1 x | ABS tube 18.0x16.0x1000 mm |
1 x | CF tube set (Ø 38 mm y Ø 14 mm) |
1 x | ABS tube 5.0x3.0x1000 mm |
1 x | ABS tube 4.0x2.0x1000 mm |
1 x | ABS tube 7.0x6.0x1000 mm |
1 x | Aluminium tube (L 1000 mm, Ø4.0 mm, Ø3.1 mm) |
2 x | Aluminium tube (L 1000 mm, Ø3.0 mm, Ø2.1 mm) |
1 x | Steel tube (L 1000 mm Ø4 mm, Ø3,7 mm) |
1 x | ABS tube 4.0x3.0x1000 mm |
1 x | Carbon fiber rod 12 mm x 1000 mm |
1 x | Carbon fiber rod 7.0 mmx1000 mm |
1 x | Horn 5/10 with M2 Bearing |
1 x | Circlick securite |
2 x | Wing connector 8pin with pin strip, plug & socket |
1 x | 120x60 mm SLH KOVO wheel |
1 x | Sun Cover PC 21 XXL (JMB Jets) |
1 x | BALSA trip 4.0x4.0x1000 mm |
3 x | Mahogany wood slat 2.0x2.0x1000 mm |
1 x | Balsa panel 3.0x100x1000 mm |
2 x | A/C quality beech plywood 600x300x0.6 mm |
2 x | Balsa panel 8.0x100x1000 mm |
3 x | A/C quality beech plywood 600x300x5.0 mm |
2 x | A/C quality beech plywood 600x300x0.8 mm |
1 x | BALSA trip 8.0x8.0x1000 mm |
1 x | Pine wood slat 3.0x5.0x1000 mm |
1 x | Blades 330mm |
1 x | Hard brass tubing (L 1000 mm, Ø5.0 mm, Ø4.1 mm) |
1 x | Steel tube (L 1000 mm Ø3 mm, Ø2,7 mm) |
2 x | XH male balance (4S) connector (2 pcs) |
1 x | Connectors banna oro 3 mm (M/F) |
1 x | Blade holder metal LAMA |
1 x | Hard brass tubing (L 1000 mm, Ø13.0 mm, Ø12.0 mm) |
1 x | |
1 x | Pine wood slat 2.0x2.0x1000 mm |
1 x | DA-50R motor alumine support |
1 x | Cylinder DA-50R, DA-100, DA-100L |
2 x | Carburetor for DA150L/170 |
2 x | Motor Saito FG-60 R3, 60 cc |
1 x | Motor Moki S 400 cc 5 cylinders |
2 x | Carburator gasket MOKI |
1 x | Baffles for Radial Moki S180/320 mm |
1 x | Carburator Moki S 180 |
2 x | Carb Carrier, red DA-85, DA-100L and DA-120 |
2 x | BOSCH spark plug cap for DA 50-R, DA 100 and DA 150 |
1 x | Motor Saito FG-73 R5, 72.7 cc |
1 x | Moki Exhaust Bend 200 mm |
1 x | Motor MOKI S 350 cc 7 cylinder |
2 x | Crankshaft bearing middle for DA-85, DA-100, DA-100L, DA-150, DA |
1 x | Air filter MOKI |
1 x | Carb Carrier, red DA-150L/170 |
1 x | Escape O-Ring ZIMMERMANN FG-84/90 R3 |
1 x | Carburador DA-35, DA-50R-DA-100L , VM-60/70 |
2 x | Aluminium-screw, M5x16mm Red |
1 x | Moki Exhaust Bend 50VT |
1 x | MOKI S250 Intake Bend |
1 x | O-Ring SAITO FG-60 R3 |
1 x | Ball bearing middle DA-50/DA60/VM120B2 |
2 x | Ball bearing middle DA-120 |
1 x | Regler autostarter MOKIS250 |
1 x | Moki Carburetor Throttle Arm with Extension |
1 x | Escape Moki 100 BVT |
2 x | Cylinder for DA-85/170 (1 piece) |
1 x | Towing hook <3m |
1 x | 48 x 10 mm cylidric hinge Ø 3,0 mm (10 pcs) |
1 x | Pin type hinge Al 6x98 mm (2 pcs) |
1 x | Gates hinge aluminium (1 pcs) |
1 x | Cylidric hinge 43 mm Ø 2,5 mm (5 pcs) |
1 x | 25 mm reinforced hinge |
1 x | Unmounted aluminium pin 6x98 mm (2 pcs) |
1 x | Long pinned hinge (12 uds) |
1 x | Nylon hinge 20x20x0,3 (10 pcs) |
2 x | Battery LiFe TopFuel 3100 mAh 2s MTAG 30C |
2 x | Shaft for A60-L (140mm) |
2 x | Propadapter for motor A50 |
2 x | DUPLEX 2.4EX RC Switch |
3 x | Connectors banna oro 8,0 mm (Male) 5 pcs. |
2 x | Propadapter for motor A50-V3 |
2 x | quality beech plywood BIRCH 600x300x2.0 mm |
4 x | Pine wood slat 6.0x6.0x1000 mm |
1 x | OBECHI sheet 2.0x3.0x1000 mm |
2 x | Balsa panel 2.0x100x1000 mm |
1 x | Birch plywood plate 600x300x1.5 mm |
1 x | Balsa panel 1.5x100x1000 mm |
2 x | Birch plywood plate 600x300x2.0 mm |
1 x | A/C quality beech plywood 600x300x6.0 mm |
1 x | Lite Plywood panel 600x300x3.0 mm |
1 x | Trailing edge BALSA 35x8x1000 mm |
1 x | Birch plywood plate 600x300x3.0 mm |
1 x | Birch plywood plate 600x300x1.2 mm |
1 x | Birch plywood plate 600x300x4.0 mm |
1 x | Mahogany wood slat 1.5x1.5x1000 mm |
1 x | Walnut wood slat 3.0x3.0x1000 mm |
1 x | Connectors MPX 8 pins with support (black) 1 pair (male-female) |
1 x | Mounting frame MPX female connector |
1 x | Optotronix Aurora Plug |
1 x | XH female balance (9S) connector (2 pcs) |
1 x | XH male balance (6S) connector (2 pcs) |
1 x | XT-90 connector (pair) |
1 x | Connectors MPX male (PIN double) |
1 x | Connectors MPX 8 pins (green) 1 pair (male-female) |
1 x | MPX PCB "6 Pins", 5 pieces |
1 x | Connectors MPX black female |
1 x | Connectors DEANS (T) micro |
1 x | XH male balance (8S) connector (2 pcs) |
1 x | Wing conexion 2 servos Futaba 50 cm |
1 x | Red 3m5 mm connector holder |
1 x | MPX screwable clips (4 pcs) |
1 x | Soporte carbono MR30 (2 pcs) |
1 x | XH male balance (2S) connector (2 pcs) |
1 x | MPX Support |
1 x | Contacto macho pin conector (10 pcs) |
1 x | XT-30 connector (pair) |
1 x | Servo Connector Brackets (10 pcs) |
1 x | XH female balance (7S) connector (2 pcs) |
1 x | MPX Support (2 pcs) |
1 x | XH LiPo extension lead |
1 x | 67 mm cylidric hinge Ø 5 mm (4 pcs) |
1 x | FESTO connector M7 Quick 4 mm |
1 x | 5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
1 x | 29x12 prop Super Silence |
1 x | 10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
1 x | QS Bulkhead Valve 4/4 mm |
1 x | Short reed valve petal for DA 100-R carburator |
1 x | Steel cylinder screw DA50/60/100/120 |
1 x | L ELBOW 90º ø 25 mm |
1 x | DA-100 Bearing |
1 x | Cable servo PREMIUM 1 m (blanco/rojo/negro) AWG21 + AWG26 TPE |
1 x | Turbo light spinner cap white 32mm |
1 x | Backmountset complete A40 |
1 x | Battery LiFe TopFuel 3100 mAh 4s MTAG 30C |
1 x | Connectors DEANS 4 pins (1 pair) |
1 x | MPX Sub-D Adaptor |
1 x | XH male balance (7S) connector (2 pcs) |
1 x | Wing conexion 2 servos JR/Graupner 50 cm |
1 x | MPX housing with flange (4 pcs) |
1 x | Connectors MPX female (PIN double) |
1 x | Protector Connector Dean-T (1 pair) |
1 x | Mounting frame MPX male connector |
1 x | MPX PCB "Gender-Changer (5 pcs) |
1 x | MR30 connector male |
1 x | Kontronik connector (10 connectors, 5 pairs) |
1 x | XT-60 connector (female) |
1 x | Soldering PCBs 8pin, 5 pieces |
1 x | Red 4 mm connector holder |
1 x | MPX PCB "4 Pins", 5 pieces |
1 x | MPX screwable clips (5 pcs) |
1 x | Connectors banna oro 8,0 mm (M/F) |
1 x | XH female balance (8S) connector (2 pcs) |
1 x | Connectors MPX male |
1 x | Check valve quick hose connector 4-4 mm |
1 x | 26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
1 x | 15 cm PTFE-tubing for 25 mm tubes |
1 x | FESTO connector M7 barb fitting 6mm |
1 x | 28x12 prop Super Silence |
1 x | FESTO connector M5 Quick 4 mm |
1 x | Festo 6mm Tubing Holder (10 uds) |
1 x | Reed valves, set DA-100/150/150L/170 |
1 x | Cylinder for DA-60 and DA-120 |
1 x | Prop washer for DA-85, DA-100, DA-100L, DA-120 |
1 x | Front axi for DA85/DA100/DA100L/DA120 |
1 x | Carburator spacer block DA-50R |
1 x | Crankcase Gasket set for DA-60 / DA-120 |
1 x | Crankcase gasket DA-100 |
1 x | Cer clip DA-50R, DA-60 DA-100 DA-100L DA-120, 1 piece |
1 x | Exhaust gasket DA-150 |
1 x | Exhaust gasket DA-35 and DA-70 |
1 x | Cylinder Gasket set for DA-60 / DA-120 |
1 x | Cylindergasket DA 170 |
1 x | MR30 connector female |
1 x | Xoar Electric Beechwood Prop 20x10 |
1 x | Alu-Cross for Backmount of A60-V2-Backmountmotors |
1 x | Shaft for A60-L V4 |
1 x | A60-6XS V4 28-Pole |
1 x | Cable adapter iCharger |
1 x | Axle for motor A30-XL V2 |
1 x | EDF Stream-Fan 110mm kv780 |
1 x | Fan for A60 |
1 x | Screwdriver for Torx® TX6 |
1 x | FesEx-Uni8 System |
1 x | FesEx-Uni6 System |
1 x | Axi for motor A40-L Motor 8-Pole-Electric Turbine |
1 x | TP/TopFuel - XH 2/3S Adapter |
1 x | Disipador para motor Hacker B 20 (or motors up to Ø20 mm) |
1 x | A60 Motor Mount Alu complete set |
1 x | Shaft for A60-XS-V2 (112,5mm) |
1 x | Axle for motor A50-L |
1 x | Screwdriver for Torx® TX8 |
1 x | TP/TopFuel - JST-EH 4/5S Adapter |
1 x | Shaft for A60-20/22/24S (120 mm) |
1 x | JETImodel Addcap 1640 |
1 x | JETImodel Addcap 820 |
1 x | A50 Motor Mount Alu complete set |
1 x | Screwdriver for Hexagon 1,5mm |
1 x | Battery LiFe TopFuel 3100 mAh 3s MTAG 30C |
1 x | Balsa panel 5.0x100x1000 mm |
1 x | Reed valve for DA-60/70 |
1 x | Ignition for DA-35 (without pickup sensor) |
1 x | Crankcase gasket DA 170 |
1 x | BALSA trip 10x10x1000 mm |
1 x | A/C quality beech plywood 600x300x0.8 mm |
1 x | Wing connector 8pin with pin strip, plug & socket |
1 x | 10m servo "Premium" wire (white/red/blue) |
1 x | Balsa panel 2.5x100x1000 mm |
1 x | A/C quality beech plywood 1520x750x4.0 mm |
1 x | A/C quality beech plywood BIRCH 600x300x1.0 mm |
|
20,932.53EUR |