1 x | Steel tube (L 1000 mm Ø8 mm, Ø7,7 mm) |
1 x | Steel tube (L 1000 mm Ø4 mm, Ø3,7 mm) |
1 x | Flap hinge (6 pcs) |
2 x | Large flex hinge (12 uds) |
1 x | Long pinned hinge (6 uds) |
1 x | Gates hinge black 30x16 mm (2 pcs) |
1 x | Canopy hinges for Discus 2c, Discus 2a, Ventus 2cx (2pcs) |
1 x | Steel tube (L 1000 mm Ø9 mm, Ø8,7 mm) |
2 x | ABS tube 3.0x2.0x330 mm |
3 x | Steel tube (L 1000 mm Ø12 mm, Ø11,7 mm) |
1 x | ABS tube 8.0x6.0x1000 mm |
1 x | Pin type hinge Al 6x98 mm (2 pcs) |
1 x | ABS tube 5.0x4.0x1000 mm |
1 x | Steel tube (L 1000 mm Ø10 mm, Ø9,7 mm) |
2 x | Miniature brass strap hinge, 1 m |
1 x | ABS tube 18.0x16.0x1000 mm |
1 x | Long pinned hinge (12 uds) |
2 x | ABS tube 4.0x2.0x1000 mm |
2 x | Steel tube (L 1000 mm Ø3 mm, Ø2,7 mm) |
1 x | Steel tube (L 1000 mm Ø5 mm, Ø4,7 mm) |
2 x | Cylidric hinge 33 mm Ø 2 mm (5 pcs) |
2 x | Aluminium tube (L 1000 mm, Ø4.0 mm, Ø3.1 mm) |
1 x | Steel tube (L 1000 mm Ø7 mm, Ø6,7 mm) |
1 x | Aluminium tube (L 1000 mm, Ø3.0 mm, Ø2.1 mm) |
1 x | ABS tube 12.0x10.0x1000 mm |
2 x | Pin type hinge Al 4,5x70 mm (2 pcs) |
1 x | 67 mm cylidric hinge Ø 5 mm (4 pcs) |
1 x | 76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs) |
1 x | ABS tube 2.0x1.0x1000 mm |
1 x | ABS tube 9.0x8.0x1000 mm |
1 x | 15 mm reinforced hinge |
1 x | Gates hinge |
1 x | ABS tube 8.0x7.0x1000 mm |
1 x | ABS tube 16.0x14.0x1000 mm |
1 x | CF tube (L 1000 mm Ø0,7 mm, Ø0,3 mm) |
2 x | ABS tube 5.0x4.0x156 mm |
1 x | ABS tube 3.0x1.0x1000 mm |
1 x | Steel tube (L 1000 mm Ø6 mm, Ø5,7 mm) |
3 x | Nylon hinge for flaps 33x9 (2 pcs) |
1 x | Thinwall Stainless Steel Tubing 28x0.6x1000 mm |
1 x | Nylon hinge 20x15x0,3 (10 pcs) |
3 x | Nylon hinge for flaps/gates 27x10,5 (2 pcs) |
2 x | ABS tube 6.0x4.0x1000 mm |
3 x | ABS tube 6.0x5.0x1000 mm |
1 x | ABS tube 3.0x2.0x1000 mm |
1 x | Fast'n EZ-CA-Hinge (12 uds) |
1 x | 48 x 10 mm cylidric hinge Ø 3,0 mm (10 pcs) |
1 x | Pin type hinge Al 3,0x50 mm (2 pcs) |
1 x | Carbon tube (L 1000 mm, Ø1.5 mm, Ø0.7 mm) |
1 x | 18 mm reinforced hinge |
1 x | Unmounted aluminium pin 6x98 mm (2 pcs) |
1 x | Nylon hinge 20x20x0,3 (10 pcs) |
1 x | Fast'n EZ-CA-Hinge, lite (12 uds) |
1 x | Gates hinge 30x16 mm (2 pcs) |
1 x | Aluminium tube (L 1000 mm, Ø7.0 mm, Ø6.1 mm) |
1 x | Nylon hinge 15x0,3 (10 pcs) |
1 x | Xplorer4 anemometro |
1 x | Threaded coupler ALU M2,5 Ø 3 (2 uds) |
1 x | SlowFlyer control horn (3 pcs) |
1 x | Horn 20x28,5 mm (2 pcs) |
1 x | Adjustable launching hook |
1 x | Horn 6/27 with M3 Bearing |
1 x | Small aluminium horn gold (2pcs) |
2 x | Horn with ball 55x40 |
2 x | Cable control set |
1 x | LH long black aluminium horn L31xH30 (2pcs) |
1 x | Threaded coupler ALU M3 Ø 4 (2 uds) |
2 x | 20 mm carbon horn |
1 x | AL Axle Shaft 4.0x16 mm (2 uds) |
1 x | Threaded coupler ALU Left M2,5 Ø 3 (2 uds) |
1 x | Landing gear axle 4x21 4 mm (2 uds) |
2 x | Horn for flap control (1 pcs) |
1 x | 6 mm blue aluminium threaded horn with patella |
2 x | LH long aluminium horn L31xH30 (2pcs) |
1 x | Towing hook <3m |
1 x | Landing gear axle Ø 6 mm (2 uds) |
2 x | Brass control horn M4 short for wire (4 pcs) |
1 x | Landing gear axle Ø 5 mm (2 uds) |
1 x | Brass control horn M3 short for wire (2 pcs) |
2 x | Horn 6/35 with M3 Bearing |
1 x | 6 mm aluminium horn with patella |
2 x | 6 mm red aluminium threaded horn with patella |
1 x | Cable with accesories |
2 x | Threaded coupler ALU Left M2,5 Ø 4 (2 uds) |
1 x | Landing gear axle Ø 4 mm (2 uds) |
1 x | Civilian pilot "Pamela" size 9cm (Slimline) |
1 x | Pine wood slat 3.0x10.0x1000 mm |
3 x | Micro flex hinge (12 uds) |
1 x | Pin type hinge Al 4,5x70 mm demount (2 pcs) |
1 x | Carbon tube (L 1000 mm, Ø16 mm, Ø12 mm) |
1 x | Carbon tube (L 1000 mm, Ø22 mm, Ø21 mm) |
2 x | Carbon tube (L 1000 mm, Ø14 mm, Ø12 mm) |
1 x | Pin hinge 39x20 mm (10 uds) |
1 x | 48 mm cylidric hinge Ø 2,5 mm (5 pcs) |
1 x | Round flex hinge (12 uds) |
2 x | Small pinned hinge (12 uds) |
1 x | Medium pin type hinge (12 uds) |
1 x | 25 mm reinforced hinge |
2 x | Horn 13,5x16 mm (2 pcs) |
2 x | Threaded coupler ALU M3 Ø 6 (2 uds) |
1 x | 1/12 Pilot "Tom" |
1 x | 100x50 mm SLH KOVO wheel |
1 x | ABS tube 4.0x3.0x1000 mm |
1 x | ABS tube 9.0x7.0x1000 mm |
1 x | 67 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs) |
1 x | ABS tube 20.0x18.0x1000 mm |
1 x | ABS tube 5.0x3.0x1000 mm |
2 x | Indoor hinge with servo arm integraded |
1 x | Rudder forward 70x28 "type Kato" |
2 x | Threaded coupler ALU M2 Ø 4 (2 uds) |
1 x | Medium extra-strong control horn with bearing 2,8x24 |
1 x | Long adjustable aluminium control horn 2,8x24 |
1 x | Rudder forward 90x28 "type Kato" |
1 x | Rudder forward 80x28 "type Kato" |
1 x | Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch |
1 x | Aro pasacable Ø25 mm (4 pcs) |
1 x | 36 mm white plastic spinner for fixed propeller |
1 x | 42 mm black plastic spinner for fixed propeller |
1 x | 36 mm red plastic spinner for fixed propeller |
2 x | WingFix ULTRA Black Edition |
2 x | Propeller balancer |
2 x | Small flex hinge (12 uds) |
1 x | Futaba 52 mm servo arm |
1 x | Threaded coupler ALU Left M3 Ø 4 (2 uds) |
1 x | Horn 5/20 with M2 Bearing |
1 x | Small control horn with bearing (2 pcs) |
1 x | Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 4 mm |
1 x | Brass control horn M2 short for wire (2 pcs) |
1 x | RH long aluminium horn (2pcs) |
1 x | Horn with ball 40x30 |
1 x | Threaded coupler ALU M3 Ø 5 (2 uds) |
1 x | Horn 5/15 with M2 Bearing |
1 x | Horn F3A de Titanium 16 mm (2 units) |
1 x | Extra long horn 60x30 |
1 x | Horn 6/20 with M3 Bearing |
1 x | 110x55 mm C SLH KOVO wheel |
1 x | 1000 cc gasoline fuel tank complet |
1 x | 20x200 mm battery rings |
1 x | 1/7 Pilot "Japanese" |
1 x | 280 cc gasoline fuel tank complet |
1 x | 170x54 mm SLH KOVO wheel with bearing and metal hub |
1 x | Carbon fabric 160 g/m² (twill weave) 127 cm, roll/ 10 m |
2 x | DUPLEX 2.4EX Expander E4 |
2 x | DUPLEX 2.4GHz GPS |
1 x | DUPLEX USB Adapter |
1 x | MT 125 temperature sensor |
1 x | Carbon tube (L 1000 mm, Ø14 mm, Ø12 mm) |
1 x | Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm) |
1 x | Pitot tube JETI MSpeed DUPLEX |
2 x | AddCAP 10AS capacitors |
1 x | Carbon fibre tube -TAPERED- 3k-PW (10 x 5 x 0.3) x 880 mm |
2 x | DUPLEX 2.4 EX MVario2 |
2 x | Glass fabric tape 225 g/m² (Silane, plain) 40 mm X 100m |
1 x | Fibra carbono 3k tela 160g/m2 100 cm x 5m |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x4.0 mm (5 pcs) |
1 x | DUPLEX MUI 30 Sensor |
1 x | Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm) |
1 x | Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm) |
1 x | EXTRA NG 74" yello/blue/red (Skywing RC) |
2 x | DUPLEX 2.4EX MULi 6s M |
1 x | DUPLEX 2.4EX Expander E2 |
1 x | DUPLEX 2.4EX RC Switch |
1 x | DUPLEX 2.4EX RC Power Switch 10 |
1 x | Carbon tube (L 1000 mm, Ø2 mm, Ø1 mm) |
1 x | Receptor FUTABA R7208SB FASSTest SBus2 |
1 x | Futaba R7114SB 2.4GHz FASTT/FASSTest S.BUS Receiver |
1 x | |
1 x | Futaba R3008SB T-FHSS 2.4GHz S.Bus2 8/32 Channel Receiver |
1 x | Receiver FUTABA R6004 FF FAST |
1 x | Pin hinge 34x16 mm (10 uds) |
1 x | Pin type hinge Al 3,0x50 mm demount (2 pcs) |
2 x | 2,3 mm Prop Adapter M5 |
1 x | Locking cable tie 2.5x100 (uds) |
1 x | 46 mm Futaba servo arm tandem with ball link |
1 x | Wing connector 8pin with pin strip, plug & socket |
1 x | HITEC 17 mm servo arm with ball link HITEC |
1 x | Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs) |
1 x | wing/fuselage connector for 12 pines AWG 20-24 |
1 x | DPSI Micro - RCS RV |
1 x | 6 mm hexagonal ball link M3 (10 pcs) |
1 x | Medidor ángulos y/o incidencias |
1 x | Truck-trailer for gliders 720 x 239 mm |
1 x | Angle measurer |
1 x | Propeller balancer |
1 x | Motor Eachine Racer 250 Brushless Motor - BG2204 2300kv - CCW th |
1 x | Adapter 3,2 mm M6 for spinner 40 mm fixed propeller |
1 x | Threaded coupler M3 (10 uds) |
1 x | Quadcopter Q50 Kit Carbon Fiber |
1 x | OPTOTRONIX Aurora LCU |
1 x | DPS Switch JR/JR |
1 x | wing/fuselage connector for 3 pines AWG 20-24 |
1 x | DPSI RV Mini 6 Magic |
1 x | DPSI Micro MPS |
1 x | PowerFuel RX V2 Fuel Pump |
1 x | EWC3 40 cm wing connector |
1 x | DPSI Micro-DualBat 5.9V / 7.2V MPX-JR |
1 x | LiIon Battery 3000 mAh 3.3v 15A (2 pcs) |
1 x | Cover cap drop-shaped paintable 43 mm |
1 x | DPSI Ampere battery backer |
1 x | Battery EMCOTEC LiIon 3000 7.2v |
1 x | EWC3 100 cm wing connector |
1 x | PWC6 PowerWingConnector for 6 servos with fuselage socket |
1 x | DPSI Micro SingleBat 5.9V/7.2V F3A Edition magnetic switch |
1 x | Optotronix Aurora Plug |
1 x | wing/fuselage connector for 16 pines AWG 20-24 |
1 x | DPSI Micro - DualBat 5.9/7.2 MPX-2xMPX dual |
1 x | DPSI OCP Overload protection |
1 x | Magnetic Connect locking system |
1 x | DPSI LR-S (with push buttons) |
1 x | EWC6 40 cm wing connector |
1 x | DPSI RV Mini 5 (2008) |
1 x | DPSI Ampere & Voltage bundle |
1 x | DPSI Micro SingleBat 5.9V/7.2V magnetic switch |
1 x | DPSI RV Mini 6 (2008) |
1 x | Field folding model stand SebArt |
1 x | Surface Indicator Gauge Small |
1 x | Field folding model stand |
1 x | 1804 2400KV Brushless Motor Qav 250 mini |
2 x | Carbon tube 3K-PW (L 1000 mm, Ø22 mm, Ø20 mm) |
2 x | Combo RAY C3542-1000 + ESC 60A |
1 x | Conector AS150 7mm antichispazo (Set: 2 pares) |
3 x | Carbon plate 350x150x4.0 mm |
2 x | Carburator Moki S 180 |
2 x | Carbon tube (L 1000 mm, Ø6 mm, Ø4 mm) |
2 x | Carbon plate 350x150x2.5 mm |
1 x | Sensor DUPLEX 2.4EX MUI 200 |
1 x | DUPLEX 2.4EX MSpeed PITOT <300 Km/h |
1 x | Carbon plate 350x150x2.0 mm |
3 x | Carbon plate 550x350x1.0 mm ECOTECH |
1 x | Glass fabric 80 g/m² (twill) 100 cm x 50m |
1 x | Fiberglass 280 g/m² 5000x1000 mm |
1 x | Peel ply 95 g/m² (plain weave) 20 mm x 100 m |
1 x | Carbon Non-Woven, 240 g/m² 100 cm x 5m |
1 x | Glass fabric 390 g/m² aero,10x1m |
2 x | Carbon plate 350x150x1.5 mm |
1 x | Carbon wing joinner 13,4 mm Ø 0,48 mm |
1 x | Connectors banna oro 2 mm (M/F) |
1 x | 3 mm Short Prop Adapter M5 |
1 x | Combo FOXY C3530-570 + FOXY 80 amp |
1 x | Carbon tube (L 1000 mm, Ø8 mm, Ø6 mm) |
1 x | Cockpit aluminium closing 4.7g |
2 x | Carbon plate 550x350x4.0 mm ECOTECH |
1 x | 2 mm Prop Adapter M5 |
1 x | DUPLEX 2.4EX MAlti (Rev.2) |
1 x | Peel ply 93 g/m² (plain weave) 150 cm x 5m |
1 x | Glass fabric 390 g/m² (silane, twill) 100 cm x 20m |
2 x | Carbon plate 500x400x2.0 mm ISOTECH |
1 x | Carbon Non-Woven, 160 g/m² 127 cm 5m |
1 x | PET film Mylar® A 350, 50 cm, roll/ 2 m |
1 x | Colormatic 2K Soft fine putty white, 1 kg |
1 x | Carbon plate 700x550x0.5 mm |
2 x | Carbon plate 350x150x3.0 mm |
1 x | Glass fabric tape 225 g/m² (Silane, plain) 40 mm |
1 x | Carbon roving DowAksa / 24k / 1600 tex |
1 x | Glass fabric tape 49 g/m² (Interglas 02037, finish FE 600/800, p |
1 x | Glass fabric 80 g/m² (plain) 100 cm, roll/ 20 m |
1 x | Glass fabric 49 g/m² (1,27 x 5 m) |
1 x | Glass fabric 49 g/m² (Finish FE 800, plain) 110 cm x 3m |
1 x | Treaded hexagonal socket insert M3 Br (4 pcs) |
1 x | CNC FPV Display screen&Transmitter Holder Vertical |
1 x | Carbon tube (L 1000 mm, Ø7 mm, Ø5 mm) |
1 x | Carbon tube (L 1000 mm, Ø6 mm, Ø4 mm) |
1 x | Charger ISDT 608AC 200W |
1 x | Cockpit plastic closing |
1 x | CF tube (L 1000 mm, Ø1 mm, Ø0,5 mm) |
2 x | Carbon plate 550x350x3.0 mm ECOTECH |
1 x | 6 mm Prop Adapter M8 |
1 x | Carburator Moki S250 |
1 x | 3,2 mm Prop Adapter M5 |
1 x | Cockpit aluminium closing |
1 x | Carbon tube (L 1000 mm, Ø4 mm, Ø3 mm) |
1 x | Carbon tube (L 1000 mm, Ø5 mm, Ø3 mm) |
1 x | Charger SKY RC D200 neo |
1 x | 4 mm Prop Adapter M6 |
1 x | Connectors banna oro 0,8 mm (M/F) |
1 x | Connectors banna oro 3,5 mm (M/F) |
1 x | Cockpit aluminium closing 5.4g |
1 x | 5 mm Prop Adapter M6 |
1 x | Combo FOXY C3530-700 + FOXY 80 amp |
1 x | Connectors banna oro 2 mm (M/F) (ultralight) |
1 x | DUPLEX 2.4 EX MBar |
1 x | MRPM-AC revolution sensor |
1 x | Suport PITOT |
1 x | DUPLEX 2,4GHz MRPM EX |
1 x | DUPLEX 2,4GHz MRPM-AC EX |
1 x | Peel ply 100 g/m² (plain weave) 50 cm x 2m |
1 x | Fiberglass 163 g/m² 1m x 20 m (Aero, finish FK 144, plain) |
1 x | Carbon Non-Woven, 240 g/m² 100 cm x 2m |
1 x | Glass fabric 49 g/m² (Finish FE 800, plain) 110 cm x 20m |
1 x | Chopped glass fibre strands 3 mm |
1 x | Carbon Non-crimp ST 200 g/m² 50 cm x 20 m |
1 x | Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 50M |
1 x | Glass fabric 80 g/m² (FK 144, twill weave) 100 cm, pack/ 1 m |
1 x | Glass fabric tape 225 g/m² (Silane, plain) 30 mm X 100m |
1 x | Glass fibre braided sleeve (45mm) roll 10m |
1 x | Glass fabric 80 g/m² (silane, twill) 100 cm x 50m |
1 x | Fiberglass 25 g/m² 5000x1270 mm |
1 x | Carbon Non-Woven, 160 g/m² 100 cm 10 m |
1 x | Carbon Non-Woven, 245 g/m² 125 cm x 20 m |
1 x | Glass fabric 49 g/m² (Finish FE 800, plain) 110 cm x 1m |
1 x | Carbon Non-Woven, 160 g/m² 100 cm 25 m |
1 x | Carbon Non-crimp ST 200 g/m² 50 cm x 10 m |
1 x | PET film Mylar® A 350, 50 cm, roll/ 5 m |
1 x | Fiberglass 163 g/m² 1m x 5 m (Twill) |
1 x | PVC grid straight 290x185x0.32 mm |
1 x | Glass fabric 49 g/m² (1,27 x 20 m) |
1 x | Carbon plate 1000x500x2,0 mm ECOTECH |
1 x | Glass fibre sleeve Ø 20 mm |
1 x | Glass fabric 80 g/m² (silane, twill) 100 cm x 10m |
1 x | Glass fabric 425 g/m² aero,10x1m |
1 x | Glass fibre sleeve Ø 20 mm X 20m |
1 x | Carbon Non-Woven, 160 g/m² 127 cm 1 m |
1 x | Peel ply 95 g/m² (plain weave) 100 mm x 100 m |
1 x | Carbon plate 350x150x1.0 mm |
1 x | Chopped glass fibre strands 3 mm |
1 x | Demoulding wedge red (40 x 20 mm) 5 pcs |
1 x | Glass fabric 80 g/m² (FK 144, twill weave) 100 cm, pack/ 5 m |
1 x | PVC grid diagonal 290x185x0.32 mm |
1 x | Glass fibre braided sleeve (45mm) roll 20m |
1 x | Carbon plate 350x150x5.0 mm |
1 x | Fiberglass 163 g/m² 1m x 10 m (Aero, finish FK 144, plain) |
1 x | Junta selladora, Tacky Tape Gris 2.75mmx12mmx15m |
1 x | Carbon Non-Woven, 240 g/m² 100 cm x 20 m |
1 x | Chopped glass fibre strands 0.2 mm |
1 x | Carbon tube 3K-PW (L 2000 mm, Ø12 mm, Ø10 mm) |
1 x | Program 5v SIO RS 232 |
|
16,257.79EUR |