3 x | 41x5,5 mm wires output (2 pcs) |
2 x | Nitroverdu 500 ml |
1 x | Universal Colour Paste deep black 250 g |
4 x | 1/6 Pilot "Tony" |
3 x | Pilot JAN 1/4 Saiplanes |
2 x | Plasti Dip Liquid Tape 429 ml black |
2 x | Hobbylite Filler, Balsa colour |
8 x | Civilian pilot "Joe" size 9cm (Slimline) |
3 x | Spannlack 1000 ml |
6 x | 1/10 Pilot "Jimmy" |
6 x | 1/6 Pilot "Garry" |
3 x | 1/6 Pilot "Cindy" |
4 x | 1/6 Pilot "John" |
6 x | Civilian pilot "Curt" size 9cm (Slimline) |
2 x | Solvent Plasti Dip 1000 ml |
3 x | 100 mm rods set for direction control |
4 x | Cable grommet Ø 3.2 mm (4 uds) |
3 x | Cable grommet Ø 4 mm (4 uds) |
2 x | Landing gear axle Ø 5 mm (2 uds) |
2 x | 140 mm rods + T patellas set for direction control |
3 x | 28x5 mm wires output (2 pcs) |
2 x | 90 mm rods + T patellas set for direction control |
3 x | Aluminun wheel collar 3 mm Ø (4 uds) |
1 x | 45 mm rods set for direction control |
2 x | Cable grommet 9.5 mm (4 uds) |
2 x | Allen wheel collar M4x6 |
3 x | 28 mm tailwheel unit |
3 x | PROFI TX fastening rings |
3 x | 100 mm rods + T patellas set for direction control |
3 x | Cable grommet Ø 6.4 mm (4 uds) |
1 x | AL Axle Shaft 4.0x16 mm (2 uds) |
2 x | Cabin latch Fox MDM1 4m (pair) |
2 x | 38x4,5 mm wires output (2 pcs) |
2 x | Canopy Lock V1 M3 Red (2 pcs) |
3 x | Canopy Latch |
3 x | Aluminium alloy coupler for carbon tube 6/M4 |
3 x | Support hands Issuer PROFI TX |
3 x | Glass fabric 80 g/m² (Interglas 05533, finish FK 144, twill weav |
3 x | Fully Threaded Steel Rod alumin 40 mm M2,5 (2 pcs) |
6 x | 13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
1 x | Profile ABS half cane 6.0x1000 mm |
2 x | ABS I Strip 10x5x1000 mm |
4 x | Paramotor BackPack XXS 2 |
2 x | Ventus 1:4 set of instruments |
3 x | Wheel collar 2 mm Ø (4 uds) |
1 x | Fully Threaded Steel Rod alumin 90 mm M2,5 (2 pcs) |
2 x | Camera Sony 4140+673 CCD with Built-in 200mw TX + antenna |
6 x | Flat Connector 4.0 mm x 1000 mm |
3 x | Ring 320 mm length (5 pcs) |
4 x | ABS Strip 1.5x6.0x1000 mm |
1 x | 800TVL CMOS camera for FPV |
1 x | PARTALL® Hi-Temp Wax, 340 g |
4 x | Strip 1,5x1,5x330 mm |
3 x | Arnes cruzado Confort de Luxe PROFI |
2 x | BALSA trip 3.0x3.0x1000 mm |
4 x | Profile ABS triangular 6.0x1000 mm 90º |
2 x | A/C quality beech plywood 600x300x0.6 mm |
2 x | Balsa panel 1.5x100x1000 mm |
1 x | Fully Threaded Steel Rod alumin 80 mm M3 (2 pcs) |
5 x | Rubber profile 6-2 mm 2M |
2 x | 13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
3 x | Allen wheel collar M3x3 |
2 x | Birch plywood plate 600x300x4.0 mm |
4 x | 20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
3 x | Lead with adhesive (2 pcs) |
2 x | Snap pin for micro clevis (10 uds) |
3 x | Me-163 |
2 x | Fully Threaded Steel Rod Duralumin 110 mm M3 (2 pcs) |
2 x | Balsa panel 6.0x100x1000 mm |
3 x | Cross Connector 4.0 mm x 1000 mm |
2 x | Angle measurer |
1 x | Landing gear axle 4x21 4 mm (2 uds) |
1 x | Carbon fiber rod 20 mmx1000 mm |
1 x | APM2.6 Power module with 5.3V DC BEC |
2 x | Extension silicon 30 cm male (Futaba) |
1 x | 5 mm Prop Adapter M6 |
3 x | 14 mm portholes (10 pcs) |
3 x | A/C quality beech plywood BIRCH 600x300x1.0 mm |
3 x | Profile ABS half cane 3x1000 mm |
6 x | Aluminun wheel collar 6 mm Ø (4 uds) |
3 x | Fully Threaded Steel Rod M2,5 (2 uds) |
4 x | SE Ring 330 mm (4 pcs) |
1 x | Snap for floding prop for 2 mm axi |
3 x | Profile ABS triangular 4.0x1000 mm 60º |
3 x | Split pin 1x8 mm (10 uds) |
2 x | Transmitter Crystal 35 Mc/s Ch 62 |
2 x | ABS angle 5,0x5,0x1000 mm |
5 x | Wing OXY 0,5 pulgadas2 |
3 x | Landing gear axle Ø 6 mm (2 uds) |
5 x | ABS angle 4,0x4,0x1000 mm |
5 x | Aluminun wheel collar 2.5 mm Ø (4 uds) |
4 x | SE Ring 450 mm (2 pcs) |
4 x | Walnut wood slat 2.0x2.0x1000 mm |
2 x | Screw-lock connector Ø 2 mm (2 uds) |
5 x | U Profile ABS 3,0x6,0x1000 mm |
2 x | Aluminium tube (L 1000 mm, Ø7.0 mm, Ø6.1 mm) |
1 x | Screw-lock pushrod conn snap Ø 1.5 mm (2 uds) |
2 x | Rubber profile 8-2 mm 2M |
3 x | Anodized aluminium servo M4x5/8 screw (4 blue pcs) |
1 x | "Y" charging 4mm wire (2 IN-1 OUT). |
2 x | Wing bolts M6 Steel screw Blue (2 pcs) |
3 x | Green smoke canister 65 g |
2 x | Ferrita 17x10x6.5 mm |
2 x | Canopy Lock V1 M3 Blue (2 pcs) |
2 x | Profile ABS triangular 4.0x1000 mm 90º |
2 x | Spray EC Red 400ml |
1 x | Pushrod greyline 3/2 with coupler M2 L: 1000 mm |
3 x | 10 mm dogdrive props |
2 x | Landing gear frontal support 29x26x13,5 |
1 x | Quick hose connector 3-3 mm |
3 x | Anodized aluminium servo M4x5/8 screw (4 lilac pcs) |
3 x | Balanceradapter JST-XH (Heli 47G) 2-6 c. |
3 x | Profile ABS Square 2 x 1000 mm |
2 x | L cockpit anchor "tipe F3A" (2 pcs) |
4 x | ABS angle 2,0x2,0x1000 mm |
4 x | Profile ABS half cane 5.0x1000 mm |
1 x | Balsa panel 5.0x100x1000 mm |
1 x | Festo 6mm Tubing Holder (10 uds) |
3 x | Initior Receiver FRX2 Wireless |
3 x | Landing gear axle Ø 4 mm (2 uds) |
1 x | Bearing block for noseleg landing gear |
2 x | Parachute BACKUP X100 |
2 x | Stainless steel cable Ø 0.5 mm (2 m) |
3 x | L-Connector 1.0 mm x 1000 mm |
1 x | Contest-S-Pult-Carbon mc-20/mc-24 |
2 x | Flap hinge (6 pcs) |
1 x | Allen wheel collar M4x4 |
2 x | CC 03 |
4 x | Opale Rucksack |
4 x | SE Ring 300 mm (2 pcs) |
3 x | 10 mm floating pad (72 pcs) |
1 x | M2-250 mm Carbon Fiber Adjustable Push Rod Sets (2 pcs) |
1 x | FESTO connector 1/8 Quick 6mm 90º |
3 x | Propeller balancer |
4 x | Clip fixing for wing (2 pcs) |
3 x | Locking cable tie 3.2x142 (uds) |
8 x | Windsock Ozone L - 700 mm |
1 x | Mahogany wood slat 2.0x2.0x1000 mm |
3 x | Split pin 1.6x16 mm (10 uds) |
3 x | BALSA trip 4.0x4.0x1000 mm |
2 x | Profile ABS half cane 2.5x1000 mm |
4 x | Wheel collar 5 mm Ø (4 uds) |
2 x | Spinner 40 mm Black (Kavan) |
2 x | Balsa panel 2.5x100x1000 mm |
3 x | ABS "T" angle 6.0x6.0x1000 mm |
5 x | Militarian pilot "Fly Boy" size 9cm (Slimline) |
3 x | SE Ring 400 mm (2 pcs) |
2 x | Spray Graphit 33 |
3 x | 45 mm rods + T patellas set for direction control |
2 x | Cockpit aluminium closing |
2 x | Extension silicon 50 cm (Graupner) |
3 x | BABY glider (Aero-naut) |
4 x | Silent-blocks DLE 170M |
1 x | Sparkplug NGK CM6 |
1 x | Press fitting for 0,5 diam. steel cable (10 pcs) |
4 x | Stainless steel cable Ø 0.88 mm - 60 kp (10 m) |
2 x | Triple rod con. 3mm Pushrod (2 pcs) |
4 x | Profile ABS triangular 2.0x1000 mm 90º |
3 x | Pushrod greyline 3/2 with coupler M2 |
1 x | NF-1 RC set |
4 x | ABS angle 6,0x6,0x1000 mm |
2 x | Horn for flap control (1 pcs) |
1 x | Cockpit plastic closing |
3 x | L-Connector 1.5 mm x 1000 mm |
2 x | Clip mini fixing for wing (2 pcs) |
5 x | Piloto Jet "Red" 1/6 Scale |
1 x | Futaba 54 mm servo arm with ball link |
1 x | Landing gear strap large (4 uds) |
3 x | U Profile ABS 5,0x10,0x1000 mm |
1 x | Futaba 14/20 mm servo pull-pull double arm with ball link |
3 x | Futaba 52 mm servo arm |
3 x | silicon 100 cm Futaba Extension Ø 0,35 mm |
2 x | Aluminium cap bolt washer M4 green (8 pcs) |
4 x | Aluminun wheel collar 3.5 mm Ø (4 uds) |
3 x | Snap long M2 (10 uds) |
5 x | Pilot "Adolf" Legends Series (Slimline) |
1 x | Spinner 105 mm CFK |
1 x | 10 mm Prop Adapter M12 |
2 x | T-Hose connector 3-3-3 mm |
1 x | Futaba 46 mm servo arm with ball link |
1 x | Servo arm with 5 mm hole to FEMA 9810A |
3 x | Motor DLE 200cc Premium Muffler |
1 x | Aluminium coupler M2,5/2 with ball bearing (1 pcs) |
2 x | 290 mm M4 7/8x212 mm shaft ship |
2 x | ABS rectangular profile 10x5.0x1000 mm |
5 x | Plastic caps for AIR BURTS (30 pcs) |
4 x | 1/10 Pilot "Jack" |
1 x | HITEC 20 mm servo arm with ball link |
2 x | Cable grommet Ø 5 mm (4 uds) |
4 x | Profile ABS Square 1 x 1000 mm |
3 x | X-RAY Micro QR (Rudder) |
4 x | ABS angle 10,0x10,0x1000 mm |
2 x | Strip ABS 2.0x3.0x1000 mm |
2 x | CellPRO 4S Adaptader (GP/KO up to 4S) |
3 x | Profile ABS Square 4 x 1000 mm |
2 x | Initior Transmitter FTX2 Wireless |
1 x | Brass control horn M4 short for wire (10pcs) |
3 x | Propeller balancer |
1 x | 45 mm flag mast |
3 x | White smoke canister 140 g |
1 x | Micro screw-lock pushrod conn snap Ø 1 mm (2 uds) |
5 x | Strip ABS 2.0x10.0x1000 mm |
3 x | Anodized aluminium servo M4x5/8 screw (4 black pcs) |
2 x | Balsa panel 10x100x1000 mm |
2 x | ABS "T" angle 2.0x2.0x1000 mm |
3 x | ABS "T" angle 4.0x4.0x1000 mm |
1 x | 3.2 mm Prop Adapter M8 |
3 x | ABS Strip 1.5x2.0x1000 mm |
5 x | L-Connector 4.0 mm x 1000 mm |
2 x | 4 mm Prop Adapter CN-Spinner |
1 x | Stainless steel cable Ø 0.5 mm (20 m) |
5 x | Streamline Stainless Steel Tubing 10.5x5.7x1000 m |
3 x | Cable with accesories |
1 x | Pushrod octagone 4/3 with coupler M3 |
3 x | Interruptor On/Off Corto micro |
3 x | Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs) |
2 x | Tip wing protector 28x10x12 (2 pcs) |
2 x | Horn 5/20 with M2 Bearing |
2 x | STEERING FRONT WHEEL SYSTEM BIDULE 111 |
2 x | Smoke set "M" |
4 x | Aluminun wheel collar 2 mm Ø (4 uds) |
2 x | Beech dowels 2.0 x 1000 mm |
2 x | Black copper lacquer wire Ø0,2 mm (5 m) |
5 x | U Profile ABS 2,0x4,0x1000 mm |
1 x | Nylon gear block Ø 5 mm (2 uds) |
2 x | Fully Threaded Steel Rod Duralumin 80 mm M3 (2 pcs) |
4 x | Stainless steel cable Ø 0.5 mm (10 m) |
1 x | NF-2 RC set |
3 x | XTorque CFK Servohebel 38 |
2 x | Glider IKARUS |
2 x | Strip 3,5x1,75x330 mm |
3 x | Motor DLE 170 M- Paramotors |
3 x | Pine wood slat 2.0x10.0x1000 mm |
1 x | Air pressure gauge |
3 x | White smoke bombs AX-18 (5 pcs) |
2 x | Tip wing protector 40x14 (2 pcs) |
3 x | Wheel collar 3 mm Ø (4 uds) |
1 x | Fully Threaded Steel Rod M3 |
3 x | DINO Glider ARC |
1 x | Thread locker IC-Loc™ blue "medium" 10 ml |
1 x | Press fitting for 1,0 diam. steel cable (10 pcs) |
2 x | Servo arm with 4 mm hole to FEMA 9810A |
3 x | BALSA triangular 15x15x1000 mm |
3 x | Fully Threaded Steel Rod Duralumin 120 mm M3 (2 pcs) |
1 x | Wheel cover holder Ø 4 mm (2 uds) |
2 x | Brass rod Ø 1.5 mm x 1000 mm |
2 x | Pine wood slat 2.0x2.0x1000 mm |
3 x | Balsa panel 3.0x100x1000 mm |
4 x | 20x200 mm battery rings |
3 x | Horn mando long (2 pcs) |
2 x | Round Rod 2,0x1000 mm |
1 x | Window mounting channel Type H 2.5x0.5 (2 m) |
4 x | Adaptador equilibrador HITEC (XH) |
1 x | Winter Glove for DC |
1 x | Steering arm 12 mm Ø 3 mm (2 uds) |
1 x | F1 Prop Cap Can (Fuel Container Conection) |
2 x | DPS Switch Ampere |
2 x | Angle of incidence meter |
1 x | Anodized alum. M3x0,5x20 mm Flat Head screw (4 blue pcs) |
2 x | ABS Strip 1.5x4.0x1000 mm |
2 x | Cyano INSTA - CURE™ Pocket (18g) |
2 x | Aluminun wheel collar 5 mm Ø (4 uds) |
1 x | Epoxy QUIK-CURE™ 5 min (260g) |
1 x | SUS wire 3m (nylon coated) |
1 x | AXI 2212/20 V2 |
1 x | Beech dowels 4.0 x 1000 mm |
1 x | Motor OS 37 SZ-H |
1 x | Landing gear frontal support 25x32x16 |
3 x | Profile ABS half cane 8.0x1000 mm |
1 x | Locking cable tie 2.5x100 (uds) |
2 x | Anodized aluminium servo M3x16 screw (4 red pcs) |
3 x | ABS Strip 1.0x4.0x1000 mm |
3 x | ABS "T" angle 8.0x8.0x1000 mm |
4 x | Fully Threaded Steel Rod Duralumin 100 mm M3 (2 pcs) |
1 x | NF-3XL set |
1 x | Fully Threaded Steel Rod alumin 70 mm M3 (2 pcs) knurled |
1 x | Propeller RABOESCH M4 30 mm (3 Blades) (Right hydropropeller) |
2 x | Threaded coupler ALU Left M3 Ø 4 (2 uds) |
2 x | A/C quality beech plywood 1520x750x3.0 mm |
1 x | Futaba Female 40 cm extension |
2 x | Potenciometro micro |
2 x | Plasti Dip Liquid Tape 429 ml black |
2 x | 5 mm M2 variable horn |
4 x | Horn 13,5x16 mm (2 pcs) |
2 x | A/C quality beech plywood 1520x750x4.0 mm |
3 x | Control horn long w/ball |
2 x | Tape GFK 50 mm |
2 x | 270 mm 3/3 mm shaft ship |
1 x | Strip ABS 2.0x8.0x1000 mm |
2 x | Steering arm 16 mm Ø 4 mm (2 uds) |
2 x | Pad self adhesive, up to 3mm / 0.12″, (10 pcs) |
3 x | Window mounting channel 5m |
2 x | Chopped glass fibre strands 3 mm |
1 x | AXI 2808/16 V2 |
1 x | Fully Threaded Steel Rod Duralumin 90 mm M3 (2 pcs) |
1 x | Katana Mini carbon wheel pants (2 pcs) |
3 x | 14 mm Portholes for screws (10 pcs) |
4 x | Horn DU-BRO 1/2 (2 pcs) |
4 x | DUPLEX 2,4EX Stick with Potentiometer for Transmitter DC/DS |
1 x | Horn 6/20 with M3 Bearing |
5 x | Pilot "Dick" Legends Series (Slimline) |
2 x | Aeronaut Baumbeschlag (Ms) 10 mm |
1 x | Rudder 36x60 mm |
2 x | Boat 82 mm |
1 x | TopFuel LiPo 20C-ECO-X 5800mAh 4S |
1 x | Servo safety connector (10 pcs) |
4 x | 290 mm 290 mm M5x18 mm shaft ship |
1 x | Spinner 60 mm Black (Kavan) |
2 x | Strip 2,0x2,0x330 mm |
2 x | Harness for transmitter JETI DUPLEX |
4 x | Brass control horn M2 short for wire (2 pcs) |
2 x | Rigid coupling brass Ø 5 mm L: 25 mm |
4 x | 3l Smoke oil |
2 x | Profile ABS half cane 4x2.5x1000 mm |
1 x | Receiver DUPLEX R3L EX 2.4 GHz |
2 x | 8Wx2 Gears-Spotlight, UltraPower, 20mm White |
4 x | Para-RC "RC-Evo-Cross" Rescue |
1 x | Cyano SUPER - GOLD™ Pocket (18g) |
2 x | Fail Safe air retract |
1 x | Propeller RABOESCH M4 45 mm (3 Blades pr) (Left hydropropeller) |
2 x | Receiver replacement antenna, approx. 85 |
1 x | Lite Plywood panel 600x300x3.0 mm |
2 x | TARANIS Q X7 |
2 x | 33,0 mm propeller (left propeller) |
3 x | 40,0 mm hydro-propeller (left hydropropeller) |
2 x | Propeller POWER-PROP 16x8 |
1 x | Spinner 125 mm GFK |
1 x | ExtraCA Top |
1 x | Locking cable tie 4.6x203 (uds) |
1 x | Blade Holder (3 blades) |
1 x | Propeller POWER-PROP 10x7 |
3 x | Threaded coupler ALU M2,5 Ø 3 (2 uds) |
2 x | 15x7 tree blades propeller |
1 x | Axial ball bearing Ø 5 mm |
1 x | Guide capes 25 mm (2 pcs) |
1 x | 5 mm Prop Adapter M8 |
1 x | OPTIC 8 opto Rx-servo insulation |
1 x | Chigre de amarre Scale 1:32 |
1 x | Rudder 10 mm |
2 x | OBECHI sheet 2.0x3.0x1000 mm |
3 x | ABS Strip 1.5x3.0x1000 mm |
3 x | Rigid coupling brass Ø 5.0 / 4.0 mm L: 25 mm |
1 x | Motor OS 50 SX-Hyper |
1 x | Futaba 38 mm servo arm with ball link |
2 x | Round Rod 5,0x1000 mm |
2 x | Long horn 50x26 |
1 x | 39,0 mm propeller (left propeller) |
2 x | Anodized aluminium servo M4x5/8 screw (4 red pcs) |
1 x | Straightened rod Ø 2.0 mm x 1000 mm |
2 x | Stainless steel cable Ø 1.3 mm (10 m) |
1 x | Cockpit aluminium closing 4.7g |
1 x | DUPLEX RC Droid Box - DC/DS |
1 x | TopFuel LiPo 20C-ECO-X 4600mAh 5S Competition F3A 2017 |
1 x | Motor OS 3805-1200 electric |
2 x | Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm) |
1 x | 17 mm servo arm with ball link DES Graupner |
1 x | AXI 2814/10 V2 |
6 x | Propeller POWER-PROP 9x6 |
4 x | Fiberglass plate 350x150x2.0 mm |
1 x | Propeller shaft supports 7mm (3 pcs) |
4 x | Round Rod 1,0x1000 mm |
3 x | SE Ring 200 mm (2 pcs) |
2 x | Pendulum glow tank |
4 x | Round Rod 6,0x1000 mm |
2 x | Fully Threaded Steel Rod alumin 60 mm M3 (2 pcs) |
1 x | 3-Blade Spinner 70 x 84 mm GFK |
1 x | Red smoke canister 100 g |
4 x | Strip ABS 2.0x5.0x1000 mm |
1 x | Spinner 60 mm White (Kavan) |
2 x | Threaded coupler ALU M2,5 Ø 4 (2 uds) |
2 x | Propeller POWER-PROP 10x6 |
2 x | 80 mm rods set for direction control |
2 x | Anodized alum. M4x0,7x20 mm Button Head screw (4 dark blue pcs) |
4 x | Set cintas unión paracaídas 145 cm |
2 x | RC Power Switch 5A |
1 x | Suction funnel for carburetor WALBRO 20-80cc (red) |
2 x | Propeller electric carbon 9.5x7 |
2 x | Brass rod Ø 0.5 mm x 1000 mm |
1 x | Propeller MENZ-S 18x8 |
1 x | Davit 70 mm (2 pcs) |
1 x | Debonder UN - CURE™ (30g) |
1 x | Suction funnel for carburetor DA70- MVVW 190cc (red) |
1 x | Walnut wood slat 1.5x1.5x1000 mm |
2 x | Fully Threaded Steel Rod alumin 60 mm M3 (2 pcs) knurled |
1 x | AXI 2217/20 V2 |
1 x | Brake for 140 mm wheels |
1 x | Motor OS FS 95 V 4T |
3 x | Pilot "Anthony" (Slimline) |
1 x | Bronze bearings Ø 5 x Ø 8 x 8 mm |
1 x | Fully Threaded Steel Rod alumin 90 mm M3 (2 pcs) |
4 x | TP/TopFuel - JST-EH 4/5S Adapter |
1 x | Doppelpoller 17 mm (6 uds) |
1 x | Carbon fibre sleeve 12k 170 mm x 5m |
2 x | Micro control horn T2 Ø 1 |
1 x | Crystal Universal RX 35.140 Ch 74 |
3 x | Propeller electric carbon 10x8 |
2 x | Extension silicon 100 cm (Graupner) |
2 x | Foam plastic plates (310x210x2 mm) |
2 x | 6 mm M3 variable horn |
1 x | 5 mm Prop Adapter CN-Spinner |
1 x | Surprise XII Horizontal Estabilizer (Freudenthaler) |
1 x | Cabel charger transmitter GRAUPNER |
1 x | Lock washer 2.2 mm (20 pcs) |
1 x | Spinner fixed propeller 60 mm / 5,0 mm |
2 x | TopFuel LiPo 25C-ECO-X 900mAh 2S |
1 x | Propeller 3BL 50 mm M4 Plastic |
4 x | White smoke canister 100 g |
1 x | Propeller MENZ-S 18x12 |
1 x | Sparkplug DLE CM6 |
1 x | VAGABOND 1500 mm ARF V2 (Red) |
1 x | AXI 5320/28 V2 |
3 x | Wheel collar 4 mm Ø (4 uds) |
3 x | Aluminium cap bolt washer M3 black (8 pcs) |
6 x | 1/12 Pilot "Langley" |
1 x | Tip wing protector 30x10 (2 pcs) |
1 x | Jet Afterburner Simulator NF-Jet3 RYS |
1 x | Balsa panel 4.0x100x1000 mm |
1 x | AXI 4120/14 V2 |
2 x | Cap Hispano Aviación |
3 x | Fournier RF-4D |
1 x | BULLIT Wing 1095 mm |
1 x | Jet Afterburner Simulator NF-Jet3 YSW |
1 x | SERVO DES 707 BB MG, Pignons |
3 x | Aluminun wheel collar 4 mm Ø (4 uds) |
2 x | Truck-trailer for gliders 720 x 239 mm |
1 x | DUPLEX R10 receiver 2,4GHz |
1 x | Covered closure or fairings |
1 x | 2,3 mm Prop Adapter M6 |
1 x | Pushrod octagone 4/3 |
2 x | Vertical cockpit anchor "tipe F3A" (2 pcs) |
1 x | AXI 5325/18 V2 |
1 x | Epoxy QUIK-CURE™ 5 min (130g) |
1 x | 3-Blade Spinner 70 x 70 mm GFK |
1 x | JIVE 80+HV Esc |
1 x | Motor DLE 170 cc Twin |
1 x | Servo MKS HBL599 SL |
1 x | DUPLEX 2.4 EX MBar |
1 x | Motor OS MAX 65 AX (incl. muffler) |
1 x | Round Rod 4,0x1000 mm |
1 x | Spinner 60 mm GFK |
3 x | AX-60 starters (5 pcs) |
1 x | Cyano INSTA - CURE™ (12g) |
2 x | PVC 0,08 qmm Graupner servos wire (5 m) |
3 x | Demoulding wedge red (40 x 20 mm) 5 pcs |
2 x | Balsa panel 1.0x100x1000 mm |
1 x | Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH |
1 x | DUPLEX 2.4EX MUI 75 |
3 x | Horn DUBRO 1/2A |
2 x | Stainless steel cable Ø 0.52 mm - 15 kp (10 m) |
1 x | SERVO DES 806 Pignons |
1 x | Fully Threaded Steel Rod alumin 60 mm M2,5 (2 pcs) |
1 x | Receiver replacement antenna, approx. 15 |
1 x | Sensor DUPLEX 2.4EX MUI 200 MULi 6S for measuring voltage on LiX |
2 x | Propeller POWER-PROP 15x10 |
2 x | Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH |
1 x | Carbon Non-Woven, 160 g/m² 100 cm 5m |
1 x | Fully Threaded Steel Rod alumin 30 mm M2,5 (2 pcs) |
1 x | Carbon Non-Woven, 240 g/m² 100 cm x 5m |
3 x | LH long aluminium horn L31xH30 (2pcs) |
1 x | Spinner 110 mm GFK |
1 x | Regulador Jeti Jes 045 |
1 x | Rudder forward 90x28 "type Kato" |
2 x | 3 copper lacquer wire Ø0,2 mm (1 m) |
1 x | DUPLEX 2,4GHz MRPM-AC EX |
1 x | Propeller MENZ-S 20x12 3 blades |
3 x | Woodruff key for DA50/85/100/150 and DA 200 |
1 x | DLE 111 pipe plug |
2 x | M3-M4 rubber washer (8 pcs) |
2 x | ASK 21 6.8m |
1 x | Pitot tube JETI MSpeed DUPLEX |
2 x | ABS Strip 1.0x3.0x1000 mm |
1 x | Propeller MENZ-S 18x8 3-Blades |
1 x | 90x60 mm standart servo cover |
3 x | SlowFlyer control horn (3 pcs) |
1 x | AXI2820/8 |
3 x | PPM to Jack link - Tx Black (mono) DC/DS Tx DUPLEX 2,4EX |
1 x | Spinner 55 mm White (Kavan) |
1 x | Cyano INSTA - CURE+™ (56g) |
3 x | Davit 85 mm (2 pcs) |
2 x | Propeller POWER-PROP 11x8 |
3 x | ABS Strip 1.5x8.0x1000 mm |
1 x | T-Hose connector 4-4-4mm |
2 x | Brass wire 0.30 mm (25 m) |
4 x | White smoke bombs AX-3 (10 pcs) |
2 x | Futaba 2x20 mm servo double arm |
1 x | EDF 60/25 Mega |
1 x | LiPo Storage Box Type "BIG" |
1 x | GPS Expander Module |
1 x | Sparkplug 1/4-32 Glow |
2 x | Carbon Non-Woven, 240 g/m² 100 cm x 20 m |
1 x | GPS Logger Dymond |
3 x | Carbon Non-Woven, 160 g/m² 127 cm 1 m |
3 x | U Profile ABS 8,0x4,0x1000 mm |
3 x | Propeller electric carbon 10.5x6 |
1 x | Circlik for shaft 1.9 mm (10 pcs) |
1 x | KIRA FAI 5F5/4s |
1 x | Propeller MENZ-S 21x12 |
1 x | Fully Threaded Steel Rod Duralumin 70 mm M3 (2 pcs) |
1 x | Glider retract undercarriage 8-16 Kg 2.5-3.2(without wheel) 140m |
1 x | Motor OS FS 95 AX |
3 x | B4-0 rocket charges (6 pcs) |
2 x | 250 mm / 16 mm Airbrakes |
2 x | Spare Shaft Ø4mm L:450x23mm M4 |
1 x | Horizontal cockpit anchor "tipe F3A" (2 pcs) |
1 x | Pushrod octagone 3/2 with coupler M2 |
1 x | Canister combo DLE 55 cc |
3 x | 2 LiPo XH>EH adapter |
1 x | Cannon 12.7 cm (2 pcs) |
1 x | Propeller electric carbon 9.5x6 |
1 x | AXI 2808/24 V2 Long |
1 x | Propeller MENZ-S 15x8 3 blades |
1 x | SERVO DES 806 Pignons |
3 x | X-RAY Micro QR (Tail Tube) |
1 x | 6 mm aluminium horn with patella |
2 x | Wheel FEMA 140 mm / 6 mm |
1 x | Avia spare blue cockpit (Top Model) |
1 x | L-shaped servo mount |
3 x | Aluminium tube (L 1000 mm, Ø3.0 mm, Ø2.1 mm) |
1 x | Body for landing gear Ø 3 mm |
3 x | Aluminium sheet 500x250x0,5mm |
3 x | TopFuel LiPo 25C-ECO-X 350mAh 2S |
1 x | Spare Shaft Ø6mm L:450mm M5 |
1 x | AXI 2826/10 V2 Long |
1 x | Crystal TX 35.150 Ch 75 |
1 x | AXI 2820/8 V2 Long |
1 x | Horn 5/15 with M2 Bearing |
1 x | Angled clevis with threaded rod M3 |
4 x | Streamline Stainless Steel Tubing 15.5x8.5x1000 mm |
1 x | MOKI S250 Intake Bend |
1 x | Motor OS 46 AX II |
1 x | Motor OS MAX 160 AX |
4 x | Pilot "Goose" (Slimline) |
1 x | Aluminium wide washer M3 gold (4 pcs) |
1 x | Turbine KingTech K30G Restart |
1 x | Propeller electric carbon 10x6 |
1 x | Propeller APC 11x5.5 Electric |
1 x | 30 cm BEC cable (male) |
4 x | SE Ring 360 mm (2 pcs) |
1 x | Ply-Span 450x600/13g Black |
1 x | Protective open Cover for wires Ø 13 mm 1000 mm |
1 x | Electric rocket starters (6 pcs) |
1 x | Red copper lacquer wire Ø0,2 mm (5 m) |
2 x | Pin hinge 26x11 mm (10 uds) |
2 x | 127x43 Ø6.0 mm aluminium core wheel |
1 x | Vacuum bag, 1200 mm x 50 m |
3 x | Futaba male 40 cm extension |
1 x | Rubber profile 10-2 mm 2M |
1 x | Aluminium wide washer M3 red (4 pcs) |
4 x | X-RAY Micro QR (Elevator) |
1 x | Propeller APC 13x10 Electric |
1 x | Oracover Red 2 m |
1 x | Oracover White 10 m |
1 x | 170x54 mm SLH KOVO wheel with bearing and metal hub |
3 x | Civilian pilot "G-Man" size 9cm (Slimline) |
1 x | Blind nut M8 (10 pcs) |
2 x | ABS tube 7.0x6.0x1000 mm |
1 x | 2.5 inch aluminium core wheel (1 pcs) |
1 x | Ball link M2,5 (10 pcs) |
3 x | White smoke bombs AX-60 (5 pcs) |
1 x | Protective Cover for wires Ø 3 mm 1000 mm |
1 x | Motor A60-5XS V4 28-pole kv420 |
3 x | AX-60 starters (5 pcs) |
1 x | EC5-Set female, simple quality, 2 x female pin, 1 x blue housing |
1 x | Aluminium wide washer M4 Blue (4 pcs) |
2 x | Red smoke canister 140 g |
3 x | Cable silicona macho batt. receptor 30 cm (Futaba) |
2 x | 43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs) |
1 x | M2/M1/6 3Diam short black ball link V1 (2 pcs) |
1 x | Carbon fiber rod 14 mmx1000 mm |
1 x | Blind nut M6 (4 pcs) |
1 x | Motor EME 60 cc with electric starter |
1 x | SCHARNHORST accessories |
2 x | 20x1000 mm Ring Strap Back To Back |
2 x | Hot Glue Stick RED |
2 x | 110x55 mm SLH KOVO wheel |
1 x | Circlick securite |
1 x | Aluminium M2x12 mm screw (4 pcs) |
6 x | 1/12 Pilot "Tom" |
1 x | Big Crow DLE-170M |
2 x | Crimping tool |
2 x | Parachute P4 |
1 x | FUNRAY RR |
4 x | 1/4 Pilot "Heidi" |
1 x | M2 5Diam short black ball link V2 (2 pcs) |
1 x | Oracover Yellow CADMIO 2 m |
5 x | 120x60 mm SLH KOVO wheel |
2 x | Horn 16,5x20 mm (2 pcs) |
1 x | Switch Cap L (silver) |
2 x | Brass hexagonal rod Ø 5 mm x 1000 mm |
4 x | Propeller POWER-PROP 7x7 |
2 x | 3,0x60 mm allen screwdriver |
2 x | 115x29 mm (4.50") Type jets aluminium core wheel |
2 x | Pin type hinge Al 4,5x70 mm to wire (2 pcs) |
2 x | Motor EME 60 cc |
1 x | Porpeller HUNTER 400 |
3 x | 12 mm mast holder |
2 x | Socket head ball link M3 (2 uds) |
1 x | 12.7 mm 2:1 black termoretract tube |
1 x | Straightened rod Ø 5.0 mm x 1000 mm |
2 x | PCARD Wireless System |
1 x | XT-60 connector (male) |
1 x | Gear set HITEC HS-645MG/5645MG/5685MH |
1 x | 30 cm DEANS female connector |
2 x | Extension PVC 150 cm (Graupner) |
1 x | Universal Colour Paste signal white (RAL 9003) 1 Kg |
2 x | 20 mm tail wheel for 0,5-1 Kg models |
1 x | Futaba S-Bus Rx/Gyro Link Lead |
1 x | Banna gold connector 2,5 mm (M/F) |
1 x | Conector BEC male (10 pcs) |
1 x | Straightened rod Ø 1.5 mm x 1000 mm |
1 x | Carbon fiber rod 0.5 mmx1000 mm |
1 x | LiPo TopFuel ECO-X 5000 mAh 3s 20C MTAG |
2 x | DISCUS 2A De Luxe 3.750 mm (Topmodel) |
2 x | Round Rod 1,5x1000 mm |
1 x | Propeller APC 10x5 Electric |
2 x | M3 Maxi ball link (2 uds) |
3 x | Piloto Jet "Green" 1/6 Scale |
2 x | Vasa model Catapult |
3 x | Elevator VENTUS 2cx 4.5m |
1 x | T-shape holder metal LAMA |
1 x | Aluminium tube (L 1000 mm, Ø4.0 mm, Ø3.1 mm) |
1 x | Cabel "Y" 30 cm (Futaba) |
3 x | 29,0 mm propeller (rigth propeller) |
1 x | M2,5 5Diam black ball link V2 (2 pcs) |
2 x | ABS tube 8.0x7.0x1000 mm |
1 x | Big-Malibu XL Roof box with surfboard rack GREY |
1 x | Servo HITEC D645 MW |
1 x | Swashplate metal LAMA |
2 x | Futaba External voltage input cable Futaba CA-RVIN-700 |
2 x | ABS Strip 1.0x5.0x1000 mm |
1 x | Propeller APC 12x6 Electric Pusher |
1 x | Module 2.4GHz T-FHHS "F" Series |
1 x | 12 mm dogdrive props |
1 x | PVC 0,14 qmm servos wire JR/Graupner (5 m) |
1 x | Interface Jack Adapter IKARUS |
1 x | Propeller APC 14x10 Electric |
1 x | Carbon fiber rod 12 mm x 1000 mm |
1 x | Propeller POWER-PROP 14x10 |
1 x | Dremel PERMAGRIT 18 mm round lime |
1 x | MPX-Dean "T" Adapter |
1 x | Porpeller HUNTER 480 |
2 x | 110x55 mm C SLH KOVO wheel |
2 x | Dean-T Plug Mold |
2 x | Check valve V2 |
1 x | 500 ml sealer (DOPE) |
1 x | Smoke set "Glider" |
1 x | Pin type hinge Al 6x98 mm (2 pcs) |
2 x | Small Crow DLE-170M |
1 x | Extension silicon 25 cm (Graupner) |
1 x | Brass hexagonal rod Ø 4 mm x 1000 mm |
4 x | 1/7 Pilot "Japanese" |
1 x | Propeller APC 10x3,8 SF |
2 x | Ventus 2cx 4.5 m de Luxe |
1 x | Carbon fiber flat 1000x3.0x0.13 mm |
1 x | quality beech plywood BIRCH 600x300x2.0 mm |
1 x | 2,4x1000 mm 2:1 black termoretract tube |
1 x | Propeller POWER-PROP 11x9 |
1 x | Straightened rod Ø 3.0 mm x 1000 mm |
3 x | Piston EME 35cc |
2 x | Black smoke bombs AX-60 (5 pcs) |
2 x | Switch Cap L (Blue) |
4 x | X-RAY Micro QR (Fuselage with canopy) |
2 x | Streamline Stainless Steel Tubing 14.5x9.6x1000 mm |
1 x | 290x4 mm M4 shaft ship |
1 x | Small flex hinge (12 uds) |
1 x | Heat Seal Iron |
1 x | Propeller MEJZLIK 9,5x3 SF Carbon Indoor |
2 x | Streamline Stainless Steel Tubing 19.5x9.8x1000 mm |
2 x | RH long aluminium horn (2pcs) |
3 x | Foam wheel Ø 38 mm (2 pcs) |
1 x | XT-90 connector (pair) |
1 x | Propeller APC 11x7 Electric |
2 x | Pitts Mufflers EME 55/60 cc |
1 x | XT-30 connector (pair) |
2 x | Profile ABS Square 3 x 1000 mm |
1 x | Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm) |
1 x | Mini VISION "spread tow" CFK |
1 x | 1000 ml sealer (DOPE) |
2 x | Fresa corte diamante Ø 2.35mm (flame) |
1 x | Horn 6/35 with M3 Bearing |
1 x | CC 05 |
1 x | Ball link M3 RPA's-UAV's |
1 x | Red silicone 1,0 qmm wire (50 m) |
1 x | Logo 400 SE VBar |
1 x | ODYSSEY Porsche ARF 2190 mm |
1 x | Propeller electric carbon 10.5x8 |
1 x | Socket head ball link M3 (2 uds) |
2 x | Connector CAN 15 |
2 x | Antenna FUTABA 2.4GHz 3PM/8FG/14SG/18SZ/18M |
1 x | Motor A2212/13T |
3 x | 67 mm cylidric hinge Ø 4,5 mm (5 pcs) |
2 x | Piñon motor autostarter 35cc |
2 x | 25,0 mm 3-BL M4 hydro-propeller (rigth hydropropeller) |
1 x | 1,2x1000 mm 2:1 red termoretract tube |
1 x | Swift S1 De-luxe 3.730 mm |
1 x | 101x28 mm (4.0") Type jets aluminium core wheel |
1 x | Pump 12 V |
1 x | Connector Sub-D 2+5 Male |
1 x | 2 mm male connector (2 pcs) with safety connector |
1 x | Pin type hinge Al 3,0x50 mm demount (2 pcs) |
2 x | MAX pilot ARTF |
2 x | 152x46 Ø6.0 mm aluminium core wheel |
2 x | 25 mm fenders (10 pcs) |
1 x | Switch Cap M (red) |
1 x | Blue metalic ball link M2/2 azul (2 pcs) |
1 x | DYNAMOMETER S-1580 |
1 x | Long ball link M2 (6 uds) |
2 x | Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs) |
2 x | Servo DITEX EL0510M |
1 x | Hovercraft sailcloth |
2 x | Futaba Multi-Switch-Prop 12+2 MODUL |
1 x | Oratex Natural White 2m |
2 x | Oracover Azul Cielo 2 m |
1 x | Indoor hinge with servo arm integraded |
2 x | IKURA GPS 4.28 m |
3 x | Connectors banna oro 8,0 mm 5 pcs(Female) |
1 x | DPS Switch JR/JR |
3 x | servo adapter lead, JST-SH socket - JR male Pin, for GR-12SH+HoT |
1 x | Green silicone 0,25 qmm wire (50 m) |
1 x | Glases Nimbus "Black" |
1 x | 43x14 mm hard foam KOVO wheel (2 pcs) |
1 x | ABS tube 5.0x4.0x1000 mm |
2 x | Xplorer2 anemometro |
1 x | Aluminum Bayonet / strongal D12 mm / 0.5 m |
1 x | SUPER DIMONA TC-80 |
1 x | Aluminum Bayonet / strongal D25 mm / 1 m |
1 x | Glases Stratus |
1 x | 25 mm carbon servo arm |
1 x | Oracover Green10 m |
1 x | Extension silicon 75 cm (Futaba) |
1 x | PPM Encoder Module |
1 x | Railing 5x100 mm |
1 x | Propeller MEJZLIK 22x10 Electric light (36 g) |
1 x | Gates hinge |
1 x | Set Wingjoiner carbon VOYAGER 128" |
1 x | 9x4.7 * 22x12 carbon propeller |
1 x | LO 100 ARC 3.3m |
2 x | Gates hinge 30x16 mm (2 pcs) |
1 x | Motor A30-12 XL Glider |
2 x | Straightened threaded rod M2-1m |
1 x | Charger HITEC CG-42 TX 7.2v/ RX 4.8v (80 mA) |
2 x | 5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
1 x | Anodized aluminium M3x0,5x20 mm Sokect Head screw (4 lilac pcs) |
1 x | Ventral support for AX-18/AX-60 |
2 x | Extension S-Bus 1-2 silicon 30 cm FUTABA |
2 x | Extension silicon 30 cm female (Futaba) |
3 x | Stickers-digit for marking |
3 x | Carbon tube (L 1000 mm, Ø1.5 mm, Ø0.7 mm) |
5 x | 1/12 Pilot "Fighter" |
1 x | Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm) |
1 x | Fox MDM 1 4000 mm DeLuxe |
1 x | Squared carbon wing joinner 5x5x220 mm |
2 x | 48 x 10 mm cylidric hinge Ø 3,0 mm (10 pcs) |
1 x | Set cables carga (Mini-JST, JST, XT60, Dean, EC3, TRX, Micro-T, |
2 x | 20 mm carbon horn |
2 x | ABS tube 10.0x8.0x1000 mm |
1 x | LH long black aluminium horn L31xH30 (2pcs) |
1 x | Neck strap JETI DC |
1 x | PVC 0,25 qmm 4 line servos wire JR/Graupner (5 m) |
1 x | ABS tube 20.0x18.0x1000 mm |
1 x | Protective Cover for wires Ø 10 mm 1000 mm |
1 x | ASK 21 6.5m + pylona |
1 x | Straightened rod Ø 4.5 mm x 1000 mm |
2 x | Copier 5x20 cm pcs |
3 x | Sensor telemetry FUTABA SBS-01C |
2 x | ABS tube 14.0x10.0x1000 mm |
1 x | Birch plywood plate 600x300x3.0 mm |
2 x | 48 mm cylidric hinge Ø 2,5 mm (5 pcs) |
1 x | Carbon fiber rod 3.0 mm x 1000 mm |
1 x | Propeller MEJZLIK 20x13 Electric light (41 g) |
1 x | VASA 55 w/Tyhpoon 240-15 4800kv |
2 x | Propeller APC 12x6 Electric |
1 x | Wing connector 8pin with pin strip, plug & socket |
2 x | ABS Strip 1.0x2.0x1000 mm |
2 x | ABS tube 4.0x3.0x1000 mm |
2 x | Gates hinge black 30x16 mm (2 pcs) |
1 x | 20 g tin paste |
2 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m |
2 x | M2/M1/6 3Diam long black ball link V1 (6 pcs) |
1 x | Shirt Hispano Aviación |
1 x | Junta selladora, Tacky Tape Gris 2.75mmx12mmx15m |
1 x | Battery FUTABA 18MZ |
2 x | Nylon hinge 20x20x0,3 (10 pcs) |
2 x | Fast'n EZ-CA-Hinge (12 uds) |
1 x | Propeller APC 10x10 Electric |
3 x | 10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
2 x | Anodized alum. M4x0,7x20 mm Flat Head screw (4 blue pcs) |
1 x | Red smoke canister 65 g |
1 x | JETImodel SINGLE BEC |
1 x | Adaptador USB - YGE |
1 x | Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH |
2 x | BABY glider drawings (Aero-naut) |
1 x | Horn mando small (2 pcs) |
1 x | Ferrita 27x14x7 mm |
1 x | PPM to Jack link - Tx Red (stereo) DC/DS Tx DUPLEX 2,4EX |
1 x | ABS tube 18.0x16.0x1000 mm |
1 x | Civilian pilot "Pamela" size 9cm (Slimline) |
1 x | ABS tube 7.0x5.0x1000 mm |
3 x | Streamline Stainless Steel Tubing 6.3x3.5x1000 mm |
1 x | Transmitter Stick Ends JETI DS-16/14 |
2 x | 76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs) |
1 x | Coupling bush 5 - 5 mm |
1 x | Set of buckles and strap, 1:4 scale. |
2 x | White smoke canister 65 g |
1 x | PVC 0,14 qmm servos wire Graupner (100 m) |
1 x | Motor A20-20 L EVO |
2 x | Propeller APC 11x10 Electric |
1 x | Propeller APC 12x8 SF |
1 x | SWTU2 switch |
3 x | Antenna holder bracket double |
1 x | 12x6 tree blades propeller |
1 x | Connectors DEANS 4 pins (1 pair) |
1 x | Extension silicon 25 cm (Futaba) |
1 x | Winter-Glove DS tx |
1 x | BALSA trip 2.0x2.0x1000 mm |
1 x | TopFuel LiPo 20C-ECO-X 5000mAh 4S MTAG |
1 x | Holder for DC Transmitter/Tray DUPLEX 2,4EX |
1 x | Large flex hinge (12 uds) |
1 x | Motor DLE 430 cc - Paramotors |
1 x | ABS tube 9.0x7.0x1000 mm |
1 x | 1,6x1000 mm 2:1 black termoretract tube |
2 x | Futaba Aero Large Case - Internal Foam |
3 x | Rescue 1,8m2 / BackPack |
3 x | 1/12 Pilot "Cougar" |
1 x | Micro flex hinge (12 uds) |
1 x | Small aluminium horn red (2pcs) |
1 x | Futaba Prop Module F14 |
1 x | PIX Hawk with accesories |
1 x | XT-60 connector (female) |
2 x | Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m |
1 x | 5 line servos wire black (1 m) |
1 x | Straightened rod Ø 5.5 mm x 1000 mm |
1 x | 6,4x1000 mm 2:1 red termoretract tube |
2 x | ABS tube 5.0x3.0x1000 mm |
1 x | Carbon Non-Woven, 160 g/m² 100 cm 10 m |
1 x | Balsa panel 8.0x100x1000 mm |
2 x | REVOLTO Blue |
1 x | Futaba Radio Case |
1 x | FPV Station for SE TX-Tray V1 |
1 x | Fresa corte diamante Ø 2.7mm (bola) |
1 x | Brass rod Ø 1.0 mm x 1000 mm |
3 x | |
2 x | Field folding model stand SebArt |
2 x | Pilot "Duke" Legends Series (Slimline) |
1 x | Glases Innovation Plus |
1 x | Cable Cargador FUTABA |
1 x | Propeller APC 12x8 Electric |
1 x | 10 mm Quick clamp_L (6 pcs) |
3 x | Civilian pilot "Gramps" size 9cm (Slimline) |
1 x | "M" set |
1 x | Spray adhesive INFUTAC (Clear) 500 ml |
1 x | Extra long horn 60x30 |
1 x | Steel tube (L 1000 mm Ø4 mm, Ø3,7 mm) |
1 x | Transmitter JETI Duplex DS-12 EX Multimod RED |
1 x | Handle for PERMAGRIT lime |
1 x | Oracover Azul 2 m |
2 x | Blue smoke canister 100 g |
2 x | Threaded coupler ALU M3 Ø 6 (2 uds) |
1 x | Propeller POWER-PROP 13x8 |
1 x | Gold antispark 5,5 mm plug |
1 x | USBCOM 5i |
1 x | Receiver bed (Blue) |
4 x | 1/4 Pilot "Mike" |
2 x | EC-Cutter |
1 x | Truck-trailer for gliders 720 x 285 mm |
1 x | Brass control horn M4 short for wire (4 pcs) |
1 x | Cable tie mounts 4.3 (4 uds) |
1 x | Black tray 2,4EX DC-16/14/24 black |
2 x | Glases Ace |
2 x | Aluminium cap bolt washer M3 green (8 pcs) |
1 x | Fox 4000 mm (Airwold) |
1 x | Propeller APC 12x10 Electric |
2 x | Carbon wing joinner 13,4 mm Ø 0,48 mm |
2 x | CDI EME 120cc |
1 x | Double conector with JR adapter and 200 mm extension |
2 x | Pitts Mufflers EME 70 cc (2 pcs) |
1 x | 44.5x17 mm (1.75") Type jets aluminium core wheel |
2 x | Cylidric hinge 33 mm Ø 2 mm (5 pcs) |
2 x | Extension S-Bus 1-2 silicon 120 cm FUTABA |
1 x | 64x20 mm (2.5") Type jets aluminium core wheel |
1 x | "S" set for boats |
1 x | Straightened rod Ø 1.0 mm x 1000 mm |
2 x | Mixers smoke bombs AX-60 (5 pcs) |
1 x | Round flex hinge (12 uds) |
1 x | Lense for Spotlights, 20mm |
1 x | 2 mm female connector (2 pcs) with safety connector |
1 x | Prolongador S-Bus JR/JR 20cm |
1 x | 76x24 mm (3.0") Type jets aluminium core wheel |
1 x | Aluminium cap bolt washer M4 blue (8 pcs) |
2 x | Green smoke canister 100 g |
2 x | 165 mm PVC transparent battery termo-retract 165 mm (1 m) |
1 x | Cable control set |
2 x | Carbon tube (L 1000 mm, Ø16 mm, Ø14 mm) |
4 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 10 m |
2 x | Carbon Non-Woven, 240 g/m² 100 cm x 2m |
1 x | Ball link M3 (10 pcs, flat ball) |
1 x | Propeller electric carbon 6x5 |
1 x | Aluminium rod Ø 4.0 mm x 3000 mm |
1 x | 165 mm PVC transparent battery termo-retract 165 mm (10 m) |
1 x | Propeller MEJZLIK 21x10 Electric light (36 g) |
1 x | Fox MDM 1 6000 mm |
2 x | 55% silver electrodes (2 pcs) |
1 x | Oracover Orange 2 m |
1 x | 70x23 Ø3.5 mm aluminium core wheel |
1 x | Propeller POWER-PROP 14x8 |
1 x | Fresa corte diamante Ø 1.0mm (bola) |
1 x | Extinguisher CO2 - 2 Kg |
1 x | Transmitter JETI Duplex DS-12 EX Multimod YELLOW |
4 x | Axle for motor A20-S (3 uds) |
2 x | Threaded coupler ALU Left M2,5 Ø 3 (2 uds) |
2 x | Dust collector for mould cleaning |
3 x | EME ignition free wheel |
1 x | Brass hexagonal rod Ø 3.5 mm x 1000 mm |
1 x | 15 mm floating pad (30 pcs) |
3 x | Militarian pilot "Kamikaze" size 9cm (Slimline) |
1 x | Oracover Black 2 m |
1 x | XH male balance (2S) connector (2 pcs) |
2 x | Cabel "Y" 30 cm (graupner) |
1 x | Swift S1 De-luxe JEPPESEN 3.140 mm |
1 x | Charger FUTABA SQN30W12P-08 220v |
2 x | MAULE M-7-420 2.8m Red |
2 x | Oils Pumps Empty (1 liter) |
2 x | Paramotor BackPack XXS (without accessories) |
1 x | Ply-Span 450x600/13g Yellow |
1 x | Steel tube (L 1000 mm Ø10 mm, Ø9,7 mm) |
1 x | 6 mm red aluminium threaded horn with patella |
1 x | Steel tube (L 1000 mm Ø5 mm, Ø4,7 mm) |
1 x | Antenna 50 mm (2 uds) |
1 x | Bec MR UBEC 5A (5v/6v/7v) |
2 x | Horn with ball 40x30 |
1 x | Swift 5050 mm (Airwold) |
1 x | Anodized aluminium M3x0,5x20 mm Sokect Head screw (4 blue pcs) |
1 x | Propeller APC 11x3.8 SF |
1 x | Hinge 4x14 mm (20 pcs) |
1 x | 6 mm ball link M3 (10 pcs) |
2 x | Carbon tube (L 1000 mm, Ø2 mm, Ø1 mm) |
2 x | TP/TopFuel - XH 2/3S Adapter |
1 x | PT 20x13 EL Propeller |
1 x | PT 21x13 EL Propeller 3 Blade |
2 x | Hinges 7x12 mm (20 pcs) |
2 x | Motor DLE 200cc Std |
1 x | ABS tube 4.0x2.0x1000 mm |
1 x | Switch Cap M (silver) |
1 x | Motor EME 35 cc with electric starter |
3 x | 60x25 mm tail wheel "type F3A" |
2 x | Aluminium wide washer M4 Black (4 pcs) |
3 x | Pick up EME 55/60 cc |
2 x | Antenna Hole Cap V1 (Silver) |
1 x | Glases Flitemaster |
1 x | DUPLEX 2,4EX Stick with 3-Position Switch for Transmitter DC/DS |
1 x | CC 02 |
1 x | SE Ring HACKER 300 mm (2 pcs) |
1 x | |
1 x | 76x23 Ø3.5 mm aluminium core wheel |
1 x | SIMtransmitter 6 Mode 2 |
3 x | |
2 x | Extension silicon 30 cm male (Graupner) |
1 x | Propeller electric carbon 7x7 |
1 x | Zurich Sport Sunglasse Dark Sensity BROWN Glasses |
1 x | QS Bulkhead Valve 6/6 mm |
2 x | 2,0x50 mm allen screwdriver |
1 x | Switch moment button, 2 functions, long FUTABA |
1 x | Towing hook |
1 x | 68 mm PVC transparent battery termo-retract 68 mm (1 m) |
2 x | 102x26 Ø6.0 mm aluminium core wheel |
1 x | 6 mm blue aluminium threaded horn with patella |
1 x | 80x40 mm hard foam KOVO wheel |
1 x | ABS tube 2.0x1.0x1000 mm |
3 x | Propeller 9x7 SlowFlyer |
2 x | Fabric scissors curved (offset handles), 16 cm / 6" length |
1 x | M2,5 5Diam metal ball link V3 (2 pcs) |
1 x | DUPLEX 2,4EX Switch SAFETY 2-Position Safety DC-16/14 |
2 x | Yellow smoke canister 65 g |
1 x | Steel tube (L 1000 mm Ø7 mm, Ø6,7 mm) |
2 x | Red smoke bombs AX-60 (5 pcs) |
1 x | Decorative caps, multicoloured |
1 x | Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm) |
1 x | Aluminium wide washer M4 Red (4 pcs) |
1 x | FUTABA T10 J T-FHSS |
3 x | Blind nut M2 (10 pcs) |
1 x | Birch plywood plate 600x300x2.0 mm |
1 x | 31,0 mm propeller (rigth propeller) |
1 x | Silicon red 1,0 qmm cable ( 25 m) |
2 x | Swift S1 De-luxe 3.140 mm |
1 x | Protective Cover for wires Ø 6 mm 1000 mm |
1 x | Steel tube (L 1000 mm Ø8 mm, Ø7,7 mm) |
1 x | Propeller APC 11x4.7 SF |
1 x | Glases Nimbus |
3 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m |
1 x | 40 mm 1/4" Race propeller (rigth hydropropeller) |
2 x | Capstan of plastic 91x44x45 mm |
1 x | Fully Threaded Steel Rod alumin 100 mm M3 (2 pcs) |
1 x | Connectors banana oro 6,0 mm Ultralight (M/F) |
3 x | 1/6 Pilot "Buddy" |
1 x | Digital Air Speed Sensor And Pitot Tube Set |
2 x | Glider PIROL |
2 x | 75 mm |
4 x | Digital weight, angle and balance meter BASIC |
1 x | 6,4x1000 mm 2:1 blue termoretract tube |
1 x | Propeller APC 13x6.5 Electric |
1 x | Car Charger DC/DS-16 |
2 x | Fabric scissors curved Premium, 16 cm / 6" length |
3 x | Presto SF Light Filler styrene-free (420 g) |
1 x | Railing L250 mm (10 pcs) |
1 x | 3 LiPo XH>EH adapter |
1 x | Joint with bearing M2,5 22x5,5 |
1 x | MPX Sub-D Adaptor |
1 x | Flap hinge 33x9 mm (6 pcs) |
1 x | EnLink 2RS Plus - DUO |
1 x | Joint with bearing M2 22x5,5 |
1 x | Pin type hinge Al 4,5x70 mm (2 pcs) |
3 x | 1000 cc gasoline fuel tank complet |
3 x | Extension silicon 30 cm female (Graupner) |
1 x | switch long 3-position DC Tx DUPLEX 2,4EX |
3 x | "S" set for planes |
1 x | Brass rod Ø 0.8 mm x 1000 mm |
1 x | Monokote BLANCO jet (1.8x0.65m) |
1 x | Propeller electric carbon 9.5x5 |
1 x | Ka-8b ELECTRIC 6000 mm ARF 1:2.5 (Phoenix Models) |
1 x | M2,5 5Diam short black ball link V2 (2 pcs) |
1 x | Propeller electric carbon 8.5x5 |
2 x | Tape GFK 38 mm |
1 x | switch short 3-position DC Tx DUPLEX 2,4EX |
1 x | 19 mm 2:1 black termoretract tube |
1 x | Green silicone 0,25 mm² wire (25 m) |
2 x | Anodized alum. M4x0,7x25 mm Button Head screw (4 blue pcs) |
1 x | DG-303 ACRO 3750 mm, winglets |
3 x | Carbon fibre tape 200 g/m² (unidirectional) 50 mm |
1 x | 2,4x1000 mm 2:1 red termoretract tube |
4 x | Aramid 50 daN 50 m |
2 x | Propeller pad and output shaft EME 55/60 cc |
1 x | Extra-long adjustable aluminium control horn 2,8x34 |
1 x | Anchor 25 mm (2 uds) |
1 x | Round Rod 3,0x1000 mm |
1 x | Gobe R-26S (Airwold) |
1 x | Connectors banna oro 6,0 mm (M/F) |
1 x | Paramotor Trike XL |
1 x | Carbon fiber rod 8.0 mmx1000 mm |
3 x | LUCAS pilot ARTF |
2 x | Futaba F14 Twin Boat Stick |
1 x | Baseplate servo |
2 x | Softshell Hispano Aviación |
2 x | Boat 43 mm (5 pcs) |
1 x | EasyFLY Addon |
2 x | 10 mm portholes (10 pcs) |
2 x | White smoke bombs AX-9 (10 pcs) |
2 x | Battery LiPo GENS 6500 mAh 3S 11,1V 60C (Gens Ace) |
1 x | Anchor 80 mm (2 uds) |
1 x | 6 mm Quick clamp_S (10 pcs) |
1 x | ORACOVER Ferrari red (2 m) |
2 x | 261 mm M4/M4 6.0x4.0 mm shaft ship |
1 x | Threaded coupler ALU M2,5 Ø 6 (2 uds) |
1 x | White 2,4 GHz antenna exit guides (2 pcs) |
1 x | 0,14 mm PVC servo wire extension, ZH micro conector. |
1 x | Silicone 0,25 qmm servos wire Graupner (100 m) |
1 x | ROBART POINT HINGE 4,7mm (5 pcs) |
2 x | Futaba Neckstrap |
2 x | Motor EME 70 cc |
2 x | FesEx-Uni6 System |
3 x | Motor EME 70 cc with autostarter |
1 x | Glidder Mü13e (Bergfalke) |
1 x | 4,8x1000 mm 2:1 red termoretract tube |
1 x | Tirpiz Battleship 1:200 |
3 x | Xplorer3 anemometro |
2 x | Gates hinge aluminium (1 pcs) |
1 x | Surprise XII Rudder (Freudenthaler) |
2 x | Blind nut M5 (4 pcs) |
1 x | ABS angle 3,0x3,0x1000 mm |
1 x | 1 m servo "Premium" wire (white/red/blue) |
1 x | Selfstarr EME35 |
1 x | Carbon fiber rod 10 mm x 1000 mm |
1 x | 1,2x1000 mm 2:1 black termoretract tube |
1 x | Connectors banna oro 8,0 mm (M/F) |
2 x | Jeti Black cap |
2 x | Anodized aluminium servo M4x5/8 screw (4 silver pcs) |
1 x | Switch for DC: Long 3 Position |
2 x | SC NAVY V15R |
1 x | Carbon tube (L 1000 mm, Ø22 mm, Ø21 mm) |
2 x | 22 mm Cut Disc Proxxon/Dremmel |
2 x | Propeller POWER-PROP 11x6 |
1 x | BALSA trip 5.0x5.0x1000 mm |
1 x | Carbon fiber rod 4.0 mmx1000 mm |
1 x | Partall paste 650 g |
1 x | 6,4x1000 mm 2:1 black termoretract tube |
2 x | SE Ring 250 mm (2 pcs) |
1 x | 25 mm reinforced hinge |
1 x | Propeller APC 14x8.5 Electric |
1 x | Long ball link M1.6 (6 uds) |
1 x | Servo NARO Max Std |
1 x | Surface Indicator Gauge Small |
1 x | Nylon hinge 15x0,3 (10 pcs) |
1 x | Propeller RABOESCH.Ms 20mm/M3r 5-BL (rigth hydropropeller) |
1 x | PropCover 16-20" (1 pcs) |
1 x | Motor ST 7-160 B |
3 x | Trike XL motor set (motor+esc+prop) |
1 x | Cable set PREMIUM , fuselage/wing one4one |
2 x | Propeller 3x3 |
1 x | Llave dinamomterica 74 Z 0 0 21 |
1 x | Ferrita con funda |
1 x | PT 21x13 EL Propeller |
1 x | M2,5 Diam metal ball link V3 (2 pcs) |
2 x | Dremel 3000 130W |
1 x | A/C quality beech plywood 600x300x5.0 mm |
1 x | Rigid coupling brass Ø 4 mm L: 25 mm |
1 x | Propeller electric carbon 10x7 |
1 x | 290 mm M4/M4 6.0x4.0 mm shaft ship |
2 x | Towing hook |
2 x | 67 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs) |
1 x | ABS tube 16.0x14.0x1000 mm |
2 x | Capstan of plastic 125x72x45 mm |
1 x | M2 5Diam black ball link V2 (2 pcs) |
1 x | PVC 0,08 qmm Futaba servos wire (5 m) |
1 x | Switch Cap M (blue) |
1 x | Propeller POWER-PROP 12x6 |
1 x | Switch Cap L (Red) |
1 x | Long ball link M3 (6 uds) |
3 x | Foam wheel Ø 351 mm (2 pcs) |
1 x | ABS tube 3.0x1.0x1000 mm |
1 x | HITEC Power Supply 30A. Max. 540w |
1 x | DUPLEX 2,4EX Switch SAFETY 2-Position Safety DC-16/14 |
3 x | CDI EME 55/60 cc |
1 x | 5 mm M2 variable inclined horn |
3 x | Streamline Stainless Steel Tubing 11.5x6.5x1000 m |
1 x | Carbon fiber flat 1000x6.0x0.8 mm |
1 x | Universal Colour Paste white 50 g |
2 x | FUTABA F14 + R168DF + Servo S148 |
1 x | Propeller POWER-PROP 16x10 |
1 x | Glider STROLCH |
1 x | Cylidric hinge 43 mm Ø 2,5 mm (5 pcs) |
2 x | LO 100 ARC 3.3m,frame canopy |
1 x | Extension silicon 35 cm (Futaba) |
1 x | Antena FUTABA 35 mhZ 3PM/3FRF/4V/4Y/6EX/6X/6Y/7C |
1 x | ORACOVER Fluor red (2 m) |
1 x | Propeller electric carbon 6.5x4 |
1 x | Fox 4000 mm with flaps (Airwold) |
1 x | DUPLEX 2,4EX Brackets for Transmitter DC/DS |
1 x | Silicone 0,25 qmm servos wire Graupner (5 m) |
2 x | Extension 100 cm (Futaba) |
1 x | Medium pin type hinge (12 uds) |
2 x | Nylon hinge 20x15x0,3 (10 pcs) |
1 x | Antena FUTABA receptor Standard 2.4 GHz ( 200 mm aprox.) |
1 x | 102 mm INO spinner (carbon imitation) |
1 x | PVC 0,14 qmm servos wire Hitec/Mpx (5 m) |
2 x | Propeller APC 10x5.5 MR Electric multirrotor PUSHER |
1 x | M2,5 Diam metal short ball link V3 (2 pcs) |
1 x | PowerBox iGyro 1e |
2 x | Threaded coupler ALU M2 Ø 4 (2 uds) |
1 x | Fresa corte diamante Ø 2.3mm (bola) |
1 x | ABS "T" angle 10.0x10.0x1000 mm |
1 x | Connectors banna oro 3 mm (M/F) |
3 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m |
1 x | Blue silicone 0,5 qmm wire (50 m) |
2 x | Futaba FX36 2.4GHz FASST Test + R7008SB |
1 x | Small pinned hinge (6 uds) |
2 x | 35x14 mm hard foam KOVO wheel (2 pcs) |
1 x | Propeller APC 14x7 Electric |
2 x | SHK 4000 mm Scale 1:4.25, V-Tails |
1 x | Silicone 0,14 qmm servos wire Graupner (5 m) |
1 x | 4 LiPo XH>EH adapter |
1 x | Copper lacquer wire Ø0,2 mm (5 m) |
3 x | Wing OXY 5,0 m2 |
1 x | 73x24 mm hard foam KOVO wheel (2 pcs) |
1 x | Swicht F14/FC-16 (3 pos) |
1 x | Adjustable launching hook |
1 x | Propeller APC 10x4.7 SF |
2 x | DG-303 ACRO 3750 mm (Airworld) |
1 x | Servo HITEC HS-53 |
2 x | Aluminium wide washer M3 blue (4 pcs) |
1 x | Hot Glue Stick GREEN |
1 x | Power supply NT 25 Amp. |
1 x | RF9 Flight Simulator with Spektrum Controller |
2 x | Xoar Electric Beechwood Prop 12x6 |
1 x | Long pinned hinge (6 uds) |
1 x | Banna gold connector 2,5 mm (100 M/F pairs) |
1 x | Anodized alum. M4x0,7x20 mm Flat Head screw (4 lilac pcs) |
2 x | Propeller 9x4,7 SlowFlyer |
1 x | Horn 5/10 with M2 Bearing |
2 x | Monokote BLUE metalizado (1.8x0.65m) |
1 x | A/C quality beech plywood 600x300x1.5 mm |
1 x | CM-3 |
2 x | M3 Maxi ball link (2 uds) |
1 x | Anodized aluminium M4x0,7x20 mm screw (4 blue pcs) |
2 x | 15 mm reinforced hinge |
1 x | Allen wheel collar M3x5 |
1 x | TeXtreme® Carbon tape 38 g/m² (IM, unidirectional) 20 mm x 100m |
1 x | 140 mm rods set for direction control |
2 x | Ventus 2cx 4.5 m Sapare Fuselaje |
1 x | Long pinned hinge (12 uds) |
1 x | Catalog AERO-NAUT 2016 |
1 x | Silicone 0,14 qmm servos wire Graupner (100 m) |
2 x | 28 mm turnbuckle |
1 x | Connectors banna oro 0,8 mm (M/F) |
1 x | 8Wx2 Navigation & Strobe, 11mm, T-Fuse Red/White |
1 x | SCHARNHORST Battleship 1:200 |
1 x | Extension silicon 35 cm male (Futaba) |
1 x | Connector Sub-D 2+5 Female |
1 x | Propeller APC 12x6 SF |
1 x | Hot Glue Stick BLACK |
1 x | Threaded coupler ALU M2 Ø 3 (2 uds) |
1 x | switch 1-Spring-UP 3-position DC Tx DUPLEX 2,4EX |
1 x | Propeller POWER-PROP 14x12 |
1 x | Smoke set "S" |
3 x | Xplorer4 anemometro |
1 x | Carbon fiber rod 0.5 mmx1000 mm |
2 x | Extension silicon 75 cm (Graupner) |
1 x | Propeller POWER-PROP 9x5 |
1 x | 5 LiPo XH>EH adapter |
1 x | Cylinder EME 35 cc |
1 x | Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm) |
1 x | Propeller APC 11x4.5 Electric Pusher |
1 x | Straightened rod Ø 0.8 mm x 1000 mm |
4 x | Windsock Ozone L -1200 mm |
1 x | CF tube set (Ø 38 mm y Ø 14 mm) |
3 x | 32x9 mm foam standar KOVO wheel (2 pcs) |
1 x | Ventus 2cx 4.5 m |
1 x | 12,7x1000 mm 2:1 green termoretract tube |
1 x | 89x25 mm (3.50") Type jets aluminium core wheel |
1 x | Kwik link aluminio IZD. M3 L: 30mm (2 uds) pin Ø 2 mm |
1 x | 58x20 mm (2.25") axle Ø5 Type jets mm aluminium core wheel |
2 x | Futaba T6K-V2 8Ch 2.4 GHz T-FHSS Air |
2 x | Mono-Switch Memory FUTABA |
2 x | Black 2,4 GHz antenna exit guides (2 pcs) |
3 x | 14x60 mm Mini rings Tie Wraps (4 pcs) |
1 x | Propeller APC 10x7 Electric |
2 x | Fresa corte diamante Ø 2.35mm (lentil) |
1 x | Ply-Span 450x600/13g Blue |
1 x | DPSI Ampere battery backer |
1 x | 6 mm hexagonal ball link M3 (10 pcs) |
1 x | Carbon Non-crimp ST 200 g/m² 50 cm x 20 m |
1 x | Rigid coupling brass Ø 2 mm L: 15 mm |
1 x | Strip 2,5x1,25x330 mm |
1 x | A/C quality beech plywood 600x300x0.8 mm |
2 x | Field folding model stand |
1 x | Power supply NT 40 Amp. |
1 x | Extension silicon 50 cm (Futaba) |
1 x | Spray adhesive AEROFIX 2 |
1 x | M2/M1/6 3Diam short black ball link V1 (6 pcs) |
1 x | Connectors DEANS (T) |
1 x | Beech dowels 10 mm x 1000 mm |
1 x | Decorative caps, multicoloured, short |
2 x | Disposable Injector Bags (30x16cm) 100 pcs |
2 x | Extension silicon 10 cm (Graupner) |
3 x | Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m |
3 x | 20x13 Falcon electric carbon prop (64g) |
1 x | XH female balance (2S) connector (2 pcs) |
1 x | Ball Link Plier |
1 x | Round Rod 2,5x1000 mm |
2 x | Straightened threaded rod M3 - 1m |
1 x | Railing Ø 2mm (20 pcs) |
2 x | 67 mm cylidric hinge Ø 5 mm (4 pcs) |
1 x | Propeller POWER-PROP 12x9 |
1 x | Propeller APC 11x7 SF |
2 x | DG-303 ACRO 3750 mm, canopy |
1 x | 33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs) |
3 x | Horn 20x28,5 mm (2 pcs) |
1 x | Streamline Stainless Steel Tubing 12.3x7.7x1000 mm |
1 x | Lunak ARF 2000 mm Yellow (Hacker Model) |
1 x | M3/5Diam metal ball link V3 (2 pcs) |
1 x | MYLAR film A350 (1000x500 mm) |
1 x | M2,5 / 5Diam metal short ball link V3 (2 pcs) |
1 x | Anchor 50 mm (2 uds) |
1 x | 37 mm PVC transparent battery termo-retract (1 m) |
2 x | Sanyo Eneloop AA 1,2 V battery 2000 mAh |
1 x | 1,6x1000 mm 2:1 red termoretract tube |
1 x | Vest clothes Hispano Aviación |
1 x | THERMIK XL 4000 mm |
2 x | Ball link M1.6 (6 uds) |
1 x | Carbon fiber rod 7.0 mmx1000 mm |
1 x | Propeller APC 10x3,8 SF Electric Pusher |
1 x | Sanyo Eneloop AAA 1,2 V battery 800 mAh |
1 x | 4Wx2 Power Navigation Light, 13mm, T-Fuse White |
2 x | Aluminium tube (L 1000 mm, Ø5.0 mm, Ø4.1 mm) |
1 x | JETI Counter for DC-24 Carbon Design 3 |
1 x | M3 INDUSTRIAL ball link (2 uds) |
2 x | Streamline Stainless Steel Tubing 9.0x5.0x1000 mm |
1 x | Propeller POWER-PROP 15x8 |
1 x | M3 Maxi ball link (2 uds) |
1 x | M3/5 Diam metal short ball link V3 (2 pcs) |
1 x | Hand Pads for Tray JETI |
1 x | Carbon tube (L 1000 mm, Ø16 mm, Ø12 mm) |
1 x | Futaba Multi-Switch-Prop 12+2 DECODER |
1 x | Rigid coupling brass Ø 3.0 / 2.3 mm L: 20 mm |
1 x | Fresa corte diamante Ø 1.4mm (bola) |
1 x | Fox MDM 1 4000 mm DeLuxe,cabina |
2 x | 63x12 mm foam special light KOVO wheel with radius (2 pcs) |
1 x | DUPLEX USBa USB-Adapter for Jeti Duplex Items |
1 x | Brass control horn M2 long for wire (10pcs) |
2 x | 100x50 mm SLH KOVO wheel |
1 x | DSM 10 Dual Switch Mixer |
2 x | Dremel PERMAGRIT thin lime |
1 x | HBC 10035-3 32-Bit |
1 x | Cap closure 33/23.5mm (2 uds) |
1 x | COPILOT Multiplex |
1 x | Balsa panel 2.0x100x1000 mm |
1 x | switch short 3-position DS Tx DUPLEX 2,4EX |
1 x | Propeller APC 10x6 Electric |
2 x | Marker ties (20 pcs) |
1 x | Propeller APC 11x5.5 Electric Pusher |
1 x | Copier 2x20 cm pcs |
1 x | Futaba S-Bus Rx/Gyro Link Lead |
1 x | Xoar Electric Beechwood Prop 15x8 |
1 x | Short adjustable control horn 3x24 |
3 x | Digital precision scale up to 2000 g |
2 x | 120x60 mm C SLH KOVO wheel |
1 x | Servo FUTABA BLS 272SV |
1 x | ABS angle 1.5x1.5x1000 mm |
1 x | FOX ARF 2000 mm Red (Hacker Model) |
1 x | 3 mm Leader (L 100 mm) |
3 x | Blind nut M4 (4 pcs) |
1 x | Carbon fiber rod 5.0 mmx1000 mm |
1 x | Straightened rod Ø 4.0 mm x 1000 mm |
1 x | ABS tube 8.0x6.0x1000 mm |
2 x | Propeller 3x2 |
1 x | Propeller APC 13x6.5 Electric Pusher |
3 x | CC 01 |
1 x | Adap/Exten for Futaba 12-14C |
1 x | 25,0 mm 3-BL M4 hydro-propeller (left hydropropeller) |
1 x | Escalera gris 5 mm (L 60mm) |
1 x | Cable FUTABA profesor-alumno LEAD 9C cuadrado-cuadrado |
1 x | Cannon 53/6 mm |
1 x | 12 mm portholes (10 pcs) |
1 x | Dingi Pl. 26 mm (5 pcs) |
1 x | 42,0 mm propeller (left propeller) |
1 x | Coupling for 2,3 mm axis |
1 x | Futaba SBS-02A Air Pressure Telemetry Sensor (FASSTest/T-FHSS) |
1 x | Eje barco 450x4 mm M4 |
2 x | 38 mm fenders (10 pcs) |
1 x | Cancamo Ms 7 mm (50 pcs) |
1 x | 42,0 mm propeller (rigth propeller) |
1 x | Coupling for 4 mm axis |
1 x | 36,0 mm propeller (rigth propeller) |
1 x | 290 mm M5 Prop shaft |
1 x | Davit Ms 35 mm (1 par) |
1 x | Coupling for M6 axis |
1 x | Emisora FUTABA T18 SZ + R7208SB |
1 x | Escalera gris 7 mm (L 60mm) |
1 x | Doppelpoller 7 mm plastic (10 uds) |
1 x | Alfileres de cobre 0,7 x 7 mm, aprox.50 g |
1 x | 290 mm M4/4 mm Prop shaft |
2 x | Cadena 1.0mm x 1 m |
1 x | Escalera gris 12x60 mm |
1 x | Coupling for 5 mm axis |
1 x | Double BLOCK 5x10x5 mm (3 pcs) |
1 x | Chain 1.5mm x 1m |
1 x | Compass Ø 15 mm (20 pcs) |
1 x | Coupling for 3,2 mm axis |
1 x | Futaba 32MZ 2.4GHz + R7108SB |
1 x | FUTABA 32MZ TRANSMITTER + R7108SB RECEIVER |
1 x | Cleat 15 mm (2 pcs) |
1 x | FUTABA 6L + R3106 2.4GHz |
1 x | Cancamo con aro 16/6.5 mm (10 pcs) |
1 x | Cornamusa 8 mm plastico (10 pcs) |
1 x | Coupling for 6 mm axis |
1 x | COMPACT drive 26/45-20 DL=175 motor |
2 x | Futaba TM-24 "F" Series 2.4GHz T-FHSS Module |
1 x | Battery FUTABA Li-Fe 2100 mAh 6.6v 4PLS/4PX/8J/10J/14SG/18SZ |
1 x | 300x4 mm M4 shaft ship |
1 x | Turbo light spinner cap white 32mm |
1 x | Extension lead 15 cm Multiplex |
3 x | Fiberglass plate 350x150x3.0 mm |
1 x | Castrol Oil A747 1l |
1 x | Ball Link Plier |
2 x | Cable silicona macho batt. receptor 30 cm (Graupner) |
1 x | 100g Flux Paste for Silver Solder |
1 x | Breatex™ Non-woven absorber 150 g/m² Roll 50m |
3 x | A60 Motor Mount Alu complete set |
1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 50 m |
2 x | Carbon plate 350x150x1.0 mm |
1 x | Carbon plate 550x350x1.5 mm ECOTECH |
2 x | EXTRA NG 74" yello/blue/red (Skywing RC) |
2 x | Propadapter for motor A50 |
2 x | Paramotor Kit Camo H1.5/ Ben Red |
1 x | Fiberglass plate 1200x1000x0,2 mm |
1 x | Futaba Female 40 cm extension |
1 x | Foam plastic plates (310x210x3 mm) |
2 x | DUBRO - KWIK TWIST TOOL - TO TWIST STEEL WIRE (1 PC) (301) |
1 x | Optical RPM Sensor |
2 x | Tren de cola carbono 50-70cc |
1 x | Breatex™ Non-woven absorber 150 g/m² Roll 20m |
1 x | Para-RC Trike "RC-Bullix" |
1 x | FesEx-Uni8 System |
1 x | Propadapter for motor A60-V2 |
2 x | 200 mm extensión servo HITEC/JR |
2 x | Axle for motor A30-XL V2 |
1 x | Crimping tool |
1 x | Screwdriver for Torx® TX6 |
3 x | ABS 500 x 400 x 1 mm (white) |
1 x | Axle for motor A50-L |
2 x | Fiberglass plate 350x150x2.5 mm |
3 x | Light System |
1 x | Circlick securite |
1 x | Cabel "Y" 15 cm |
2 x | Turbina KINGTECH K320 G5 |
1 x | Light semi-synthetic Oil PUTOLINE TT (1l) |
1 x | A60-6XS V4 28-Pole |
2 x | Foam plastic plates (310x210x5 mm) |
1 x | Aramid fibre shears Proton®, 21 cm / 8" length |
1 x | Tail wheel for 8-12 kg models |
3 x | Breatex™ Non-woven absorber 150 g/m² Roll 5 m |
3 x | ABS 500 x 400 x 1,5 mm (white) |
2 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (5 pcs) |
1 x | ARAMID honeycomb 1300x2600x2 mm |
1 x | PET film Mylar® A 350, 50 cm, roll/ 2 m |
2 x | Screwdriver for Hexagon 1,5mm |
1 x | Premium servo extension 75cm |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x6.0 mm (5 pcs) |
1 x | PET film Mylar® A 350, 50 cm, roll/ 5 m |
2 x | 1,5x50 mm allen screwdriver |
1 x | Bungee HLG Premium |
3 x | Tailwheel for F3A size |
3 x | Buy Perforated film 100 cm / 10 m |
1 x | Fiberglass plate 350x150x4.0 mm |
1 x | Cut tube |
1 x | Tail wheel for 5-8 kg models |
1 x | Concave-Convex sandpaper file 13 mm |
3 x | Axi for motor A40-L Motor 8-Pole-Electric Turbine |
3 x | Carbon fibre sandwich sheet 350x150x3 mm |
2 x | Servo GO-1035MG 16 kg.cm 0.08s/60º |
2 x | Peel ply 95 g/m² (plain weave) 100 mm x 100 m |
1 x | Digital scale up to 40 kg |
1 x | Disipador para motor Hacker B 20 (or motors up to Ø20 mm) |
1 x | Breatex™ Non-woven absorber 300 g/m² Roll 41 m |
2 x | Cable servo PREMIUM 1 m (blanco/rojo/negro) AWG21 + AWG26 TPE |
1 x | Extension 7.5 cm |
2 x | Connectors banna oro 8,0 mm (Male) 5 pcs. |
3 x | ABS 500 x 400 x 2,0 mm (white) |
3 x | Tailwheel for 1-3 kg models |
3 x | Para-RC Mix |
3 x | Motor OS 3820-1200 electric |
2 x | Backmountset complete A40 |
2 x | Shaft for A60-20/22/24S (120 mm) |
2 x | Carbon plate 350x150x2.0 mm |
1 x | Parachute PV6 for F3J |
1 x | Shaft for A60-L V4 |
2 x | Tailwheel for 60/120 size |
1 x | Premium servo extension 50cm |
2 x | Carbon Non-crimp ST 100 g/m² 50 cm x 10 m |
2 x | Extra Hard Titanium Herxagon Screwdrivers |
1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 100 m |
2 x | Tailwheel for 20/60 size |
1 x | Boxed KIT OF 7 Rotary Burrs FINE |
1 x | EDF Stream-Fan 110mm kv780 |
2 x | Buy Perforated film 100 cm / 50 m |
1 x | 2,5x60 mm allen screwdriver |
2 x | Carbon plate 550x350x2.5 mm ECOTECH |
3 x | Cable adapter iCharger |
1 x | Styrene plate 320x120x0.5 mm |
1 x | Carbon Fiber TeXtreme® 80 g/m² (plain) 100 cm, roll/ 10 m |
2 x | Carbon plate 350x150x5.0 mm |
1 x | Propadapter for motor A50-V3 |
1 x | Servo M2x9/16 screw (4 pcs) |
3 x | Screwdriver for Hexagon 1,27mm |
2 x | Extension silicon 100 cm (Futaba) |
1 x | A50 Motor Mount Alu complete set |
2 x | Fan for A60 |
1 x | Carbon plate 350x150x2.5 mm |
4 x | Carbon plate 350x150x1.5 mm |
1 x | Wheel FEMA 178 mm / 8 mm |
1 x | Quicklock washer 4 mm (10 pcs) |
1 x | Wheel 22 mm |
1 x | Circlik for shaft 1.2 mm (10 pcs) |
1 x | Superlight wheel 125 mm with valve (2 pcs) |
1 x | Spring lock washer 2.6 mm (20 pcs) |
1 x | Spring lock washer 3.1 mm (20 pcs) |
2 x | Quicklock washer 1.5 mm (10 pcs) |
2 x | One Way bearing for EME55 starkit with key |
1 x | Circlik for shaft 1.5 mm (10 pcs) |
1 x | Flat washer 1.7 mm (20 pcs) |
1 x | Superlight standard wheel 100 mm (2 pcs) |
1 x | Wheel Scale 1/4 Vintage 178 mm / 7" (1 par) |
1 x | Wheel FEMA 112 mm / 6 mm |
2 x | Wheel FEMA 152 mm / 8 mm |
1 x | Wheel Ø 75 mm (1 ud) Electron Retracts |
1 x | Quicklock washer 2.5 mm (10 pcs) |
1 x | Piloto JET 1:3,5 |
1 x | Circlik for shaft 2.3 mm (10 pcs) |
1 x | M3 black washers (4 pcs) |
1 x | Pilot WWII US Navy Pacific 12" Scale 1/6-1/5 |
1 x | Wheel 38 mm V2 |
1 x | Wheel ø180 mm AIRTOP Ballon pneumatic |
1 x | Quicklock washer 3 mm (10 pcs) |
1 x | Quicklock washer 2 mm (10 pcs) |
1 x | Carburetor for ZG45SL and ZG62/S/SL |
1 x | Reed valve for DA 50-R |
1 x | Motor Mount for TITAN ZG38/38S/38SC, length 36 mm |
1 x | Foam air filter Ø 48 mm, blue |
2 x | Starter EM Gear Power 80 |
2 x | Piston ring for DA-50R and DA-100 |
1 x | Motor Mount for TITAN ZG45 and ZG62, length 36 mm |
1 x | BOSCH spark plug cap for ZG 26SC/SCM, 231SLH, G230RC |
2 x | Piston ring for DA-60 and DA-120 |
2 x | Pick up DA50/100/150 |
2 x | Air Intake manifold 90° - Large |
1 x | Tufnol Choke Lever Arm d=4,7mm |
1 x | Cylinder for ZG20 |
1 x | EVOLUTION 10 GX gasoline motor |
1 x | Piston ring for DA-150 |
1 x | Motor Mount for TITAN ZG45 and ZG62, length 54 mm |
2 x | Crimping sleeves for cable 1.3 mm (10 pcs) |
1 x | 26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
1 x | Carburador DA-35, DA-50R-DA-100L , VM-60/70 |
4 x | Starter EM Gear Power 250 |
2 x | Piston ring for ZG 20 and G240RC |
1 x | Glider Ka 7 Red (2540mm) |
1 x | "Taxi Tank" Fuel Tank |
1 x | Propeller APC 4.7x4.2 |
1 x | Propeller APC 8x3,8 SF Electric Pusher |
1 x | 10 mm gas motor standoff |
1 x | Propeller APC 4.1x4.1 Electric |
1 x | Propeller APC 8x6 Electric |
1 x | Propeller APC 4.5x4.1 |
1 x | Battery LiPo GENS 5000 mAh 2S 7.4V 60C (Gens Ace) |
2 x | Actuator Electric 25 mm |
1 x | Fox 4000 mm Airworld,canopy frame |
1 x | Pine wood slat 1.5x3.0x1000 mm |
1 x | Pine wood slat 6.0x6.0x1000 mm |
1 x | Trailing edge BALSA 35x8x1000 mm |
1 x | Battery LiPo GENS 3300 mAh 6S 22.2v 45C (Gens Ace) |
1 x | Liston HAYA 10 x 10 x 1000 mm |
1 x | Mahogany wood slat 1.5x1.5x1000 mm |
3 x | Parachute expulsion foam |
1 x | Yellow smoke bombs AX-60 (5 pcs) |
1 x | Birch plywood plate 600x300x4.0 mm |
1 x | Linden wood slat 3.0x3.0x1000 mm |
1 x | BLANIK 50 V2 Silver/Orange (SebArt) |
2 x | Remote electric ignition system |
1 x | Birch plywood plate 600x300x2.5 mm |
1 x | E_brakes electronics |
1 x | Battery Lipo GENS 4000 mAh 7.4v TX |
1 x | Battery LiPo GENS 5000 mAh 2S 7.4V 50C (Gens Ace Hard Case) |
1 x | Battery LiPo GENS 4400 mAh 7S 25.9v 35C (Gens Ace) |
1 x | 10-15mm Servo Arm |
1 x | Liston HAYA 3 x 10 x 1000 mm |
1 x | Plywood sheet BEECH 600 x 300 x 2,0 mm |
1 x | Battery LiPo GENS 4000 mAh 2S 7,4v RX (Gens Ace) |
1 x | Nose leg 155 mm with wheels 70 mm |
2 x | ASH 31 Mi Scale:1/3 - 7m, elevator |
1 x | Battery LiPo GENS 5000 mAh 6S 22.2V 60C (Gens Ace) |
1 x | Battery LiPo GEN2700 mAh 3S 11.1v Transmitter Pack (Gens Ace) |
1 x | Electric Landing Gear ASPIRE (Elektron Retracts) |
1 x | Battery LiPo GENS 5000 mAh 6S 22.2v 45C (Gens Ace) |
1 x | Electric Landing Gear ULTIMATUM 2.0 (Elektron Retracts) |
1 x | Conector JR/Uni Servo female BLUE silicon (10 pcs) |
1 x | T-Motor MN705-S Kv125 (pack 2 uds) |
1 x | Conector JR Servo female (50 pcs) |
2 x | SE Ring 240 mm (2 pcs) |
2 x | RUDDOG Protection and Heat Shield Tape (2mx50mm) |
1 x | Steering arm 16 mm Ø 4 mm |
1 x | Conector XT-30 (macho) |
1 x | Conector JR Servo female (10 pcs) |
2 x | |
1 x | Wing bolts M3 Steel screw blue (2 pcs) |
1 x | RX Battery Eneloop 6,0 V JR 2500 mAh |
1 x | Sanyo TX Battery Eneloop 9,6 V Futaba |
1 x | Split M1,2x10 (10 pcs) |
3 x | ESC ALPHA 60A HV |
1 x | Bateria LRP 2200-7.2v 6 cell NiMH |
2 x | Sanyo RX Battery Eneloop 6,0 V JR |
1 x | Steering arm 12 mm Ø 4 mm |
1 x | Snap short M2 (10 uds) |
1 x | RX Battery Eneloop 4,8 V JR 2500 mAh |
1 x | Conector JR Servo female (10 pcs) |
3 x | Ballast 700gr OPALE |
1 x | Sanyo RX Battery Eneloop 6,0 V Futaba |
1 x | Stainless steel cable Ø 0.62 mm (10 m) |
1 x | Sanyo RX Battery Eneloop 4,8 V JR |
1 x | Sanyo TX Battery Eneloop 7,2 V MPX |
1 x | Conector FUTABA Servo female (10 pcs) |
1 x | Wing bolts M3 Steel screw Red (2 pcs) |
2 x | Conector MR-60 (pareja) |
1 x | 21x14 Falcon electric carbon prop (64 g) |
1 x | STEERING FRONT WHEEL SYSTEM BIDULE 55 |
1 x | 20,5x14,5 Falcon electric V2 (40 g) |
1 x | Conector XT-30 (hembra) |
1 x | Conector FUTABA Servo male (10 pcs) |
1 x | Sanyo RX Battery Eneloop RX 4,8 V Futaba |
1 x | Steering arm 12 mm Ø 4 mm (2 uds) |
1 x | Conector JR Servo male (10 pcs) |
1 x | Conector MT-60 (pair) |
1 x | Sanyo TX Battery Eneloop 9,6 V Hitec |
2 x | SE Ring 480 mm (2 pcs) |
2 x | P 17×5.8 Prop-2PCS/PAIR |
1 x | Sanyo TX Battery Eneloop 9,6 V 2500 mAh |
1 x | 8 mm Adapter for AXI53xx |
2 x | Panasonic Eneloop AA 1,2 V battery 19>00 mAh |
1 x | Conector JR/Uni Servo male BLUE silicon (10 pcs) |
1 x | Wheel collar 6 mm Ø (4 uds) |
1 x | Steering arm 16 mm Ø 3 mm |
1 x | Conector FUTABA Servo male BLUE silicon (10 pcs) |
1 x | Triple rod con. 2mm Pushrod (2 pcs) |
1 x | Conector AS150 7mm antichispazo (Set: 2 pares) |
1 x | 10 mm aluminium spinner (Kavan) |
2 x | Combustible Glow "KAVAN" air/heli 10% nitro |
1 x | Adaptadores carga 6s JST-XH |
1 x | Propeller APC 13x4 Electric Pusher |
1 x | DEMON CORTEXpro |
1 x | Combustible Glow "KAVAN" air/heli 5% nitro |
2 x | Glow starter with charger 230v |
1 x | Universal Charging Lead - 500mm - 4mm to Glow Plug Igniter |
1 x | OSD Telemetry sensor |
1 x | Landing lights 18 mm (0.71in) |
1 x | Kavan Car 25% nitro 1l |
1 x | XT60 Connector with Holder Male 2pcs |
2 x | Combustible Glow "KAVAN" air/heli 15% nitro |
1 x | Combo KAVAN PRO 3542-1150 + KAVAN PRO-80 SB |
1 x | Ciano KAVAN Thin 20g |
1 x | 50 mm aluminium spinner (Kavan) |
2 x | Brazo servo KAVAN doble aluminio 25T - 2.5" M3 |
1 x | Pin hinge 39x20 mm (10 uds) |
1 x | Battery voltage telemetry |
1 x | Glow Plug Clip 1.3 Ah |
2 x | |
1 x | Ciano KAVAN Super Thin 20g |
3 x | KAVAN Hand crank fuel pump |
1 x | Fuel bottle 500 ccm |
1 x | Resistor 3W 5% 2R2 |
1 x | Resistor 3W 5% OR47 |
1 x | Cover cap drop-shaped paintable 43 mm |
2 x | Fast'n EZ-CA-Hinge, lite (12 uds) |
1 x | Heat sink for Optotronix LEDs |
1 x | KAVAN CA Activator 150ml |
2 x | Propeller APC 10x5 Electric Pusher |
3 x | Double side nipple |
3 x | Streamline Stainless Steel Tubing 7.5x4.5x1000 mm |
2 x | EXTREME FLIGHT BLACK MAGNETIC ROUND FILLER PLUG |
1 x | 550 cc gasoline fuel tank complet |
1 x | Profile ABS half cane 7.0x1000 mm |
1 x | RCEXL Electronic ignition twin CM-6 |
1 x | Cable set PREMIUM, SUB-Done 4three fuselage/wing 160 cm |
1 x | Black "FUEL VENT" round aluminum overflow socket |
2 x | Extra hard 750 ccm complete gasoline fuel tank |
1 x | 7.94 x 4.76 mm tygon tube 1 m |
2 x | EXTREME FLIGHT RED MAGNETIC ROUND FILLER PLUG |
1 x | Adapter lead MPX/EC3 |
2 x | RCEXL Electronic ignition twin A-02 |
2 x | Deposito DUBRO 3000cc-100oz |
2 x | Electronic double valve landing gear |
2 x | 700 ml complete glow fuel tank |
2 x | Aluminium ignition bad (blue) |
3 x | Dubro Fuel Tank Cap/Fittings 2-24oz Tanks Gas |
1 x | DLE 30 complete electronic ignition |
2 x | diameter silicone tube for glow |
2 x | T-Connector 4.0 mm x 1000 mm |
1 x | Extra hard 250 ccm complete gasoline fuel tank |
1 x | ABS tube 6.0x4.0x1000 mm |
2 x | U Profile ABS 1,0x2,0x1000 mm |
1 x | DLE Ignition unit |
2 x | Opto Gas Engine Kill Switch |
1 x | Extra hard 1500 ccm complete gasoline fuel tank |
2 x | Electron 22 mm Fitting barb |
2 x | GLOW 2C + accesories |
1 x | Carbon tube (L 1000 mm, Ø14 mm, Ø12 mm) |
3 x | Deposito DUBRO 1800cc-60oz |
2 x | Silicone adhesive ELASTOSIL® E4, tube/ 90 ml |
1 x | MPX PCB "Gender-Changer (5 pcs) |
1 x | Aluminium carb bend for ZG 45SL |
1 x | Red 3m5 mm connector holder |
1 x | ABS tube 12.0x10.0x1000 mm |
1 x | BIELA 25x10 WILGA Propellers |
2 x | Hexagonal Nut M4 (20 pcs) |
1 x | PVC termo-retract battery 45 mm transparent orange (1 m) |
1 x | Quicklock washer 3.5 mm (10 pcs) |
1 x | 18x10 BIELA 3Bl propeller (3-blades) |
1 x | TopFuel LiPo 20C-ECO-X 5000mAh 5S MTAG |
1 x | Xoar Electric Beechwood Prop 16x7 |
1 x | TopFuel LiPo 20C-ECO-X 5000mAh 2S MTAG |
1 x | TopFuel LiPo 35C-X 5000mAh 6S |
1 x | Servo TOPMODEL DS9010 T |
3 x | Sandwich carbon + poplar 4mm + carbon 290x160 mm |
1 x | M2/M1/6 3Diam long black ball link V1 (2 pcs) |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø25 mm, Ø21 mm) |
1 x | Motor ACTRO 35-4-1100 |
1 x | La Capitania di Venetia 1:50 |
1 x | Head upper part |
1 x | Carbon fiber rod 6.0 mmx1000 mm |
1 x | Blade holder center |
1 x | Extension 6 lipos XH > EH |
1 x | AXI 2826/6 V2 |
1 x | Motor Moki S 300 cc 5 cylinders |
1 x | Motor Mega AC 16/15/02 |
1 x | Super Light Wheels (Sponge Tyre) Ø 60mm x 19 mm (2pcs) axis Ø 3. |
1 x | Tachometer Hyperion Multi-pala |
1 x | Propeller RABOESCH M5 0 mm (4 Blades) (Right hydropropeller) |
1 x | TARANIS X9D - plus EU/LBT FrSky |
1 x | 6 mm Prop Adapter M8 |
1 x | DLE-55RA Ignition unit |
1 x | Silicon black 2,5 qmm cable ( 25 m) |
1 x | Connectors banna oro 2 mm (M/F) |
1 x | Receiver FUTABA R7014SB FASST Test |
1 x | DLE 55-RA Muffler |
1 x | Aluminium blue ball links M3 V1 (10 pcs) |
1 x | Blind nut M3 (4 pcs) |
1 x | Optotronix Aurora Plug |
1 x | Oracover Verde 2 m |
1 x | Towing hook <3m |
1 x | Lightweight aircraft wheel, 50x18.5x3 |
1 x | Superlight deluxe wheel 50 mm (2 pcs) |
1 x | JEEMO Kit ARF Basic (2 color Carbon finish) XTRALIGHT |
1 x | Offshore-Schleppwinde Bs |
1 x | Life guard Ø 17,0 mm (10 pcs) |
1 x | Propeller RABOESCH M4 60 mm (4 Blades) (Right hydropropeller) |
1 x | Grua Plastico 116 mm |
1 x | Gold antispark 4 mm plug |
1 x | Support XT60 conector (2 pcs) |
1 x | DUPLEX 2,4EX Stick with 2-Position Switch for Transmitter DC/DS |
2 x | Tape GFK 25 mm |
3 x | Prolongador S-Bus JR/JR 10cm |
2 x | Glass fabric 425 g/m² aero,10x1m |
1 x | Receiver Hitec OPTIMA 9 2.4 GHz AFHSS 9ch |
1 x | Gear set HITEC D645 MW |
1 x | Actuador lineal HLS12-100210-7.4v |
1 x | Servo JETI DSHV 3D13T (13 Kg) |
2 x | Set fresas corte acero-carburo Ø 1.8/2.3 mm (2 pcs) |
1 x | WINGO 2 ARF |
1 x | ALMIRALSANKER anchor 40 mm (2 uds) |
1 x | KIRA 500-30 6,7:1 |
2 x | Glass fibre braided sleeve (45mm) roll 20m |
1 x | Magnetic Connect locking system |
1 x | Glases Aspen |
1 x | Oracover Yellow CUB 2 m |
2 x | Monokote ROJO misil (1.8x0.65m) |
1 x | 3x8W Triple-Spotlight, 12mm, T-Fuse White |
1 x | Propeller APC 14x12 Electric |
1 x | Swift ARF 2000 mm Red (Hacker Model) |
1 x | VAGABOND 1500 mm ARF V2 (Blue) |
1 x | Propeller APC 11x4.7 SF Pusher |
1 x | JETImodel Addcap 1640 |
1 x | Aluminium Hub for folding Props 35 mm M8 Shaft 6 mm |
3 x | Motor A200-6 |
1 x | Motor B50 19 S & 6.7:1 gearbox |
1 x | Xoar Electric Beechwood Prop 20x10 |
2 x | Carbon roving DowAksa / 24k / 1600 tex |
1 x | Motor A50-16 S V4 |
1 x | Motor A30-14 L V4 |
1 x | USB Adaptor OPTronics |
1 x | F9F Panther (Aero-naut) |
2 x | Mini-handed clamp |
1 x | F-104 Starfighter Y/B Aniversary(SebArt) |
1 x | PROXXON - SANDING BELTS FOR BSL 220/E 120 GRIT (5 pcs) |
1 x | Vacuum pump 12 CFM |
1 x | Tool for entel |
2 x | Tube bender |
1 x | Starter Sullivan-STAR 603 DINATRON |
1 x | Fiberglass plate 350x150x1.0 mm |
1 x | Welder 100W/200V |
1 x | Vinyl Gloves IDEAL LIGHT, size M , box/ 100 pcs |
1 x | Smart Soldering Iron 110W/230V AC |
1 x | Spare round blades, 28 mm, pack/ 2 pcs. |
1 x | Fiberglass plate 350x150x1.5 mm |
1 x | Precision wrench L100 mm |
1 x | Turbina DRAGON 30 Kg |
1 x | Pitts Muffler for D.A. 100 |
1 x | Raer wall |
1 x | Stainless steel silencer for DA 150/150L |
1 x | Reed valve carrier, without reed valves DA-150L/170 |
1 x | Washer 2.2×4 |
2 x | Cylinder DA-50R, DA-100, DA-100L |
1 x | Piston pin for DA-60 DA-120 |
2 x | Ciano KAVAN Thick 20g |
1 x | Superlight wheel 100 mm with valve (2 pcs) |
2 x | Head runner |
1 x | Piston pin for DA50R/DA100 |
1 x | Carb Carrier, red DA-150L/170 |
1 x | Hifht speed needle DA-50R/100I |
1 x | Wheel FEMA 100 mm / 6 mm |
2 x | Gasket, from red carb carrier to crankcase DA-150L/170 |
2 x | Esc MasterBasic 40SB |
1 x | KAVAN Threadlocker - Blue 10ml |
1 x | Wheel FEMA 70 mm / 5 mm |
3 x | Cierva C30 spanish decoration Stickers |
1 x | Crystal RX 35.160 Ch 76 |
1 x | RM-130FSI 4-stroke inline gasoline airplane 3 cylinder |
1 x | Esc X-55-SB-Pro |
2 x | Bearing housing |
1 x | Micro Crystal RX 35.090 Ch 69 |
1 x | Carburetorgasket DA-85, DA-100, DA-100L and DA-120 |
1 x | Q80-8M V2 |
2 x | One Way bearing for EME35 starkit with key |
1 x | Selfstarr DLE55, EME55/60, DLA56, SE 55 |
1 x | LA500 rotor head core |
1 x | Crystal RX 35.140 Ch 74 |
3 x | Aluminium Hub for folding Props 43 mm M8 Shaft 5 mm |
1 x | Wheel FEMA 90 mm / 6 mm |
2 x | LA500 pre-rotation gear hub |
2 x | Esc master MEZON 120 Lite |
2 x | Micro Crystal RX 35.170 Ch 77 |
1 x | Gasket, Carburetor DA-150/170 |
3 x | Ball Bearings for motor A60-V2 |
1 x | Black silicone 1,0 qmm wire (50 m) |
1 x | ASG 32 560 mm |
1 x | LA500 ciclic lever |
2 x | Wheel keeper washer |
2 x | Esc MasterBasic 90 Opto |
1 x | Ciano KAVAN Medium 20g |
1 x | Wheels 220mm (2 pcs) |
1 x | LA500 tail empennage |
1 x | Sanyo RX Battery Eneloop 6,0 V FUT |
1 x | Muffler for Titan ZG 26SC/EI |
1 x | SE Ring 350 mm (2 pcs) |
1 x | Pitts Muffler kit for CAP 21 |
1 x | Sanyo Eneloop AA 1,2 V 2400 mAh battery |
1 x | Foil for sticking flaps and ailerons |
3 x | FuelTank Cap (red) |
1 x | HOPPER tank INTAIRCO iTrap 50 175 ml 3x racor 6mm CLASSIC PRO |
2 x | Fuel dot red |
1 x | Streamline Stainless Steel Tubing 17.8x12.4x1000 mm |
1 x | Savox HV Brushless Servo SB-2270SG (Swashplate) |
1 x | Propeller hub EME 60cc |
1 x | JM electric Pump |
4 x | DUBRO - 102MM / 4" DIA BIG WHEELS (400RV) - 2PCS |
1 x | Stainless steel silencer for Titan ZG38/S/SC |
1 x | Stainless Steel Silencer side outlet for ZG 20/23/26 |
1 x | WingFix ULTRA Black Edition |
1 x | ZENOAH G270RC |
1 x | GPS V2 Sensor for M-LINK receivers |
2 x | Tygon tube 6.35 - 3.18 mm 1m |
1 x | Steel cylinder screw DA50/60/100/120 |
1 x | Central piece 42 mm 0º |
1 x | Steel tube (L 1000 mm Ø3 mm, Ø2,7 mm) |
2 x | Steel tube (L 1000 mm Ø6 mm, Ø5,7 mm) |
2 x | Propeller APC 11x5 Glow/Gas |
1 x | JETImodel Addcap 820 |
1 x | ZENOAH ZG26 SCM Marine Engine |
2 x | ESC Ripmax QUANTUM 80A SBEC |
1 x | Propeller APC 15x6 Glow/Gas |
1 x | ALPHA 1000mm BL ARTR |
1 x | Carbon plate 1000x500x2,0 mm ECOTECH |
1 x | Stainless Steel Tuned Pipe for engines from 45 to 80 cc |
1 x | Propeller APC 11x7 Glow/Gas |
1 x | Propeller APC 10x6 Glow/Gas |
1 x | Tailwheel for 40/90 size |
1 x | Carbon fabric 245 g/m² (twill weave) 127 cm, roll/ 10 m |
1 x | Steel tube (L 1000 mm Ø9 mm, Ø8,7 mm) |
1 x | Battery LiPo GENS 4000 mAh 4S 14.8v 25C (Gens Ace) |
1 x | Battery LiPo GENS 160 mAh 2S 7.4V 30C (Gens Ace) |
1 x | Battery LiPo GENS 2600 mAh 2S 7.4v Transmitter Pack (Gens Ace) |
1 x | Hexagonal Nut M2 (10 pcs) |
1 x | Threaded insert M4 (4 pcs) |
1 x | BU 131 Jugmann ARC |
1 x | Propeller diller 5/6,3/8/9 |
2 x | Blind nut M6 (4 pcs) |
1 x | JU87B STUKA 60cc ARF - BlackHorse |
1 x | PARTENAVIA 2020 mm ARC with Flaps |
1 x | Nut for mounting M3 (4 pcs) |
1 x | PARTENAVIA 2020 mm ARF with Flaps |
1 x | Hexagonal Nut M1,6 (10 pcs) |
2 x | DH82 Tiger Moth Scale 1:3.3 Panel Instrum. frontal |
1 x | Dummy motor GPW Wasp Scale 1/4 |
1 x | Lock nut M5 (20 pcs) |
2 x | P-47 Thunderbolt ARF 2075 mm (Black Horse) |
1 x | Nut for mounting M6 (4 pcs) |
1 x | BU 131 Jugmann Panel Instrum. frontal |
1 x | Nut for mounting M5 (4 pcs) |
1 x | RV4 VAN's 42% (German Style) |
2 x | Sub-D Plug Mold |
1 x | Micro Tarjeta SD Rapid Rush 16 GB |
1 x | Mini DART 2 F3K carbon light 1m Green |
1 x | Mold plugs XT-30 |
1 x | 3 blades set |
1 x | 4 blades set |
2 x | Glass fabric 80 g/m² (plain) 100 cm, roll/ 20 m Aero Finish |
1 x | Avanti S 2.3m Jet YELLOW/BLACK (SebArt) |
1 x | Round Rod 1,25x1000 mm |
1 x | Flybar support metal LAMA |
1 x | Housing Ø 4 mm (2 pcs) |
1 x | Lancha salvavidas 58 mm (5 pcs) |
1 x | Lancha salvavidas Kutter .Ösen 43 mm (5 pcs) |
1 x | Grua platico 100 mm |
1 x | Brass hexagonal rod Ø 3 mm x 1000 mm |
1 x | Guide capes 23 mm (4 pcs) |
2 x | Servo FUTABA BLS173 SV |
2 x | Servo FUTABA BLS172 SV |
3 x | Reductora IPS 150 DX2BB-CXCS 8,6:1 |
2 x | Cooler motor type 280 |
1 x | Servo FUTABA HPS-A700 Digital S-Bus |
2 x | Servo FUTABA S 3071 HV S-Bus |
2 x | Servo FUTABA SBL 471 SV |
2 x | Small aluminium horn blue (2pcs) |
2 x | Set Threaded coupler ALU M2,5 Ø 4 (2 uds) |
2 x | Brass control horn M2 large for wire (2pcs) |
1 x | Combo AM480 T-Motor 650 Kv |
1 x | Battery LiPo GENS 4400 mAh 6S 22.2v 35C (Gens Ace) |
1 x | Battery LiPo GENS 2200 mAh 2S 7.4v 60C (Gens Ace) |
1 x | Battery LiPo GENS 5300 mAh 4S 14.8V 30C (Gens Ace) |
1 x | Battery LiPo GENS 4000 mAh 6S 22.2v 45C (Gens Ace) |
1 x | Fox MDM 1 4000 mm DeLuxe,Fundas deLuxe |
1 x | Threaded insert M3 (4 pcs) |
1 x | BLANIK 50 V2 Silver/Blue (SebArt), cabina |
1 x | Battery LiPo GENS 120 mAh 2S 7.4V 30C (Gens Ace) F3P Pack |
1 x | Top light bright 10mm/3V (2 pcs) |
1 x | Fully Threaded Steel Rod alumin 40 mm M3 (2 pcs) |
1 x | FA27.2×8.9 Prop-2PCS/PAIR |
1 x | Metal ball clevis M3 (10 uds) |
1 x | Fully Threaded Steel Rod alumin 70 mm M3 (2 pcs) |
1 x | Sanyo RX Battery Eneloop 6,0 V JR |
1 x | Lipo KAVAN 2200 mAh 11.1v 40/80C |
1 x | Fully Threaded Steel Rod alumin 100 mm M3 (2 pcs) |
1 x | Maxi Fuel Filter |
2 x | Fuel Dot (Silver) |
1 x | Connectors MPX 8 pins (green) 1 pair (male-female) |
3 x | Smoke Dot (Red) |
1 x | Servo SAVOX SB-2290 SG |
2 x | Fuel dot V3 (Black) |
2 x | HOPPER tank Digitech 100 ml |
2 x | Refueling Cap V3 Black |
3 x | Fuel Dot for Glow/Gas conversion DUBRO |
1 x | Servo SAVOX SW-1250 MG digi |
1 x | Electromotor starter EME 35cc |
3 x | Fuel dot Gold color |
2 x | Fuel station 10L no include pump electric |
3 x | Hopper 125 ml XICOY with support |
3 x | Hopper 125 ml INTAIRCO |
1 x | Hose clips 6 mm |
2 x | Tank gas KUZA 500 cc |
2 x | FESTO Filter 6 mm |
1 x | T- Fittings blue color (2pcs) |
2 x | Servo SAVOX SV-0236 MG HV |
1 x | Compact on-board starting system (9525) |
2 x | Tygon tube 9.53 x 6.35 mm 15 m |
1 x | Servoarm Aluminium SH-82 |
2 x | double Fuel Dot V2 (silver) |
2 x | Hose clamps 0.16-0.20in, (4 pieces) |
3 x | HOPPER tank INTAIRCO iTrap 60 250ml 3x FESTO 90º 6mm CLASSIC PRO |
2 x | Polyurethan FESTO hose 3x0,5 mm, transparent |
3 x | FESTO Blanking plug G1/8 |
2 x | SAVOX SH 1290 MG servo digi |
1 x | Servo SAVOX SA-1256 TG |
1 x | Futaba 25 mm servo arm with ball link |
1 x | Telemetria XYCOY adapter |
1 x | Modulo reglaje avance V3 |
1 x | Universal Colour Paste deep black 50 g |
1 x | PowerBox VRegulador 5.3v |
1 x | Crystal Universal RX 35.020 Ch 62 |
2 x | Aluminium Hub for folding Props 37 mm M8 Shaft 5 mm |
1 x | Fiberglass plate 620x540x0,2 mm |
2 x | Motor A50-12 L Glider |
1 x | Motor A60-7XS V4 28-pole kv330 |
1 x | Shaft for A60-XS-V2 (112,5mm) |
1 x | A50 Backmountset complete |
1 x | Glass fibre sleeve Ø 20 mm X 20m |
1 x | Battery charging cable XT60 |
1 x | Fiberglass plate 620x540x1,0 mm |
2 x | Motor A50-14 L 8-Polos Electric turbine |
1 x | Telemetry JETI |
1 x | PROXXON - SAW BLADE DIAMOND OZI/E |
1 x | DUBRO - CUB WHEELS (1/3 SCALE) (558TLC) - 2PCS |
1 x | Ball Bearing Oil 25 ml |
1 x | Carbon plate 350x150x3.0 mm |
1 x | Servo BLS-M55B 61.2kg |
1 x | JETI SPIN 80 Pro |
1 x | BOEING 727, Retract set for Boeing 727 |
1 x | Hard aluminium thin-walled tube with fibreglass case ø30x1mm, 1m |
1 x | Servo BMS-4112 |
1 x | Cable set Premium™ MAXI "one4two" |
1 x | Soporte grifo FESTO vertical (1 pcs) |
1 x | Servo Robbe FS 525 BB MG HV |
1 x | BOEING 727, Electric brake 28mm + controller |
1 x | Mixing tube for double syringes and cartridges (MR 1:1 and 2:1) |
1 x | Turbina X132 H "Compact Version" |
1 x | BOEING 727 kit |
1 x | Captador RCEXL para DA |
2 x | Servo Robbe FS 128 BB MG HV Digital |
1 x | SKY RC T400Q Charger 4x100w |
1 x | Servo GO-1073MGW 32 kg.cm 0.135s/60º |
2 x | BOEING 727, Jet pipe for Boeing 727 |
1 x | Servo BLUE Bird BLS-H71B v2 |
1 x | Teflon rollers 80 mm x 15 mm Diam. |
1 x | TopFuel LiPo 20C-ECO-RX 500mAh 2S |
3 x | Fibra de vidrio 80 g/m² (2 m x 100 cm) |
1 x | Motor A20-6 XL 10-Pole EVO + 4,4:1 |
1 x | MAX BEC 2D plus EX |
1 x | A40-10S V2 8-Pole + 6,7:1 PG |
1 x | Motor B50-10L Competition + 6,7:1 |
1 x | Motor B20-18 L + 4:1 gearbox |
1 x | TopFuel LiPo 25C-ECO-X 1800mAh 2S |
1 x | Buy Perforated film 100 cm / 20 m |
1 x | Glass fabric tape 225 g/m² (Silane, plain) 30 mm X 100m |
1 x | Motor B40 10L + MAXON 4,4:1 Keramik |
1 x | Motor A10-7 L 4,4:1 |
1 x | Motor B50-9L Competition + 6,7:1 |
1 x | Fibra vidrio 25g 110 cm/ 3m (Interglass 02034, finish FE800 pl |
1 x | Teflon rollers 40 mm x 15 mm Diam. |
1 x | Fiberglass plate 620x540x0,3 mm |
1 x | Alu-Cross for Backmount of A60-V2-Backmountmotors |
2 x | Motor A30-14 M V2 6 Poles |
2 x | Motor A30-10 XL V4 |
1 x | Motor A40-10 L V2 14-Pole Glider |
1 x | Glass fabric tape 225 g/m² (Silane, plain) 40 mm X 100m |
1 x | Motor A60-6XS V4 28-pole kv370 |
1 x | Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 100M |
2 x | Motor A40-10S V4 14-Pole |
1 x | Motor A50-10L Turnado V3 Glider |
1 x | Carbon plate 350x150x0.5 mm |
1 x | Colormatic 2K Soft fine putty white, 1 kg |
1 x | Peel ply 100 g/m² (plain weave) 50 cm x 2m |
2 x | Male Prolonger TP 4/5S |
1 x | OS 40-FG 4T Motor |
1 x | VBar Control RX-Satellite |
1 x | Epoxy Resin L 285 + Hardener 285 (Aero), kit/ 2.8 kg |
1 x | Carbon plate 550x350x1.0 mm ECOTECH |
1 x | Turbine RHINO 200 SE 20.4 Kg |
1 x | Fiberglass 5000x1100 mm 49 g/m² |
1 x | Telemetry SPEKTRUM |
2 x | Turbo Prop KS |
1 x | PVC transparent black termo-retract battery 185 mm (1 m) |
1 x | Fiberglass 163 g/m² 1m x 5 m (Twill) |
1 x | Spark Ceramic JETCENTRAL |
1 x | Variable Flow Smoke Pump System |
1 x | Bluetooth Adapter JET CENTRAL |
1 x | Colador RABBIT |
1 x | Turbine HORNET 85 SE |
1 x | Fiberglass 163 g/m² 1m x 50 m (Aero, finish FK 144, plain) |
1 x | Fiberglass plate 350x150x0.3 mm |
1 x | Fiberglass plate 620x540x3,2 mm |
1 x | Carbon plate 550x350x3.0 mm ECOTECH |
1 x | Starter 12v (Max 180 and 30ccm) |
1 x | Screws M1,6x6 Allen |
1 x | Ignition RM-25V |
1 x | HPP-21 PLUS PC Programmer for Hitec Digital Servos |
1 x | Rotorhead pushrod |
2 x | SUPER STRANGTH SERVO ARMS FUTABA LONG (8 PCS) |
1 x | Propeller diller for DLE170 |
1 x | Laminating brush 10 mm, pack/ 50 pcs |
1 x | Hifht speed needle DA-50R/100I |
1 x | BETA 1400 RTF Red |
1 x | O-Ring for Carburetor screw DA85, DA-100L, DA-120 |
2 x | Aluminium-screw, M5x20mm Red |
1 x | Crankshaft bearing front, DA-85, DA-100 DA-100L DA-120 DA-150 DA |
1 x | Propeller drill jig DA 100/85/120/150/200 and VM 60-210 |
1 x | Sealing Iron Profi LCD |
2 x | LA500 pre-rotation gear |
1 x | Piñon motor autostarter 60cc |
1 x | Motor rotor LA-500 |
1 x | P-47 96", Electric retract Landing gear |
1 x | Focos Ms 4 mm (10 pcs) |
1 x | 15 cm PTFE-tubing for 25 mm tubes |
1 x | Nut M2 securing |
1 x | Motor ROTO-85 FS NG 4T 2 cylinder Boxer |
2 x | Aluminium-screw, M5x16mm Red |
1 x | Equipment set XL |
2 x | Ball bearing middle DA-120 |
1 x | Ball bearingfront for DA-50/60/VM120B2 Ball bearing for DA-170 |
1 x | Crankcase Gasket set for DA-60 / DA-120 |
2 x | BETA 1400 ARF Red |
1 x | Reed valve carrier for DA-85, DA-100L and DA-120 |
1 x | Propeller plate for DA-120 / DA-170 / DA-150 New Version |
1 x | Ignition unit for DA-70/100/120/150/170/200 |
1 x | Gasket, Aluminium-Plate >reed valve carrier DA-85, DA-100L, DA-1 |
1 x | Crankcase gasket DA-100 |
1 x | Crankcase gasket DA 170 |
1 x | Spring for jet needle, fits DA-60/70 |
1 x | Carb Carrier, red DA-85, DA-100L and DA-120 |
1 x | UMX™ Whipit™ DLG BNF Basic (E-flite) |
1 x | E-FUN BUG (ROI-Import) |
1 x | Cierva C30 simulated motor |
1 x | Pilot LA 500 |
1 x | Micro Crystal RX 35.100 Ch 70 |
1 x | LA500 nose |
1 x | Crystal RX 35.050 Ch 65 |
1 x | Miniature brass strap hinge, 1 m |
1 x | Metal gasket elbow/cilinder DA60R/DA120 |
1 x | Metalic joint for DA-50R/DA100 cilinder/elbow |
1 x | Pitts Muffler for D.A. 120 |
1 x | PROFICOVER 5m |
1 x | Altimeter Altis NAO |
1 x | Prop hub for DA-100, DA-100L |
1 x | Airtop balloon pneumatic wheels ø160 mm with bearing. 1 pair |
1 x | Menbrane joint for DA 50-R |
1 x | 73x24 mm hard foam KOVO wheel with bearing (2 pcs) |
1 x | Piston for ZG 20 |
1 x | Servo HITEC HS-45 HB |
1 x | Propeller APC 10x7 Glow/Gas |
1 x | Monokote PLATINO metalizado (1.8x0.65m) |
1 x | Sandwich carbon + poplar 4mm + carbon 480x290 mm |
1 x | Insulator block ZG 38/S/SC |
2 x | Small aluminium horn gold (2pcs) |
2 x | Battery LiFe TopFuel 3100 mAh 4s MTAG 30C |
1 x | resin-hardener L-385 H-385 (625 g) |
1 x | Alignment dowels (2 parts, outer-Ø 8 mm) bag/ 100 pairs |
2 x | PROFI Box JETI |
1 x | MEKP Harderner 100 g |
2 x | Retract undercarriage |
2 x | Cooler motor type 300 |
2 x | Reductora IPS 150 DX2BB-BXCS 7:1 |
1 x | Reductora IPS 150 DX2BB-FXCS 11,8:1 |
1 x | Micro control horn (2 pcs) |
1 x | Small control horn with bearing (2 pcs) |
1 x | Horn micro type4 Ø 0,5 (2 pcs) |
1 x | Ball Link M2 with Ball and Hardware, 10 pcs |
2 x | Fuel tank fiberglass Easy Jet 2,2 l |
1 x | Thread locker "Medium" 10 g |
1 x | 24x10 prop Super Silence |
1 x | 22x10 prop Super Silence |
1 x | Extension silicon 10 cm (Futaba) |
1 x | 28x12 prop Super Silence |
1 x | 27x10 prop Super Silence |
1 x | Motor GAUI F-50 |
1 x | Super Light Wheels(Sponge Tyre) Ø 60mm x 21mm (2pcs) axis Ø 4.0m |
1 x | Super Light Wheels(Sponge Tyre) Ø 50mm x 19mm (2pcs) axis Ø 3.5m |
1 x | Wheel FEMA 82 mm / 5 mm |
1 x | Propeller APC 16x8 Glow/Gas |
1 x | Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 15 m |
1 x | Piston for G230RC and ZG 231SLH |
1 x | Prop hub screw DA85/100/120 & VM170/200/210 |
1 x | AXI 2820/10 V2 |
2 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 20 m |
1 x | PVC plate 320 x 194 x 0.23 mm (brown) |
1 x | Insulator block ZG 38/S/SC |
1 x | Extra long Prop Bolt for ZG 45/62/74/80, with M5 threaded hole |
1 x | Sanyo RX Battery Eneloop 4,8 V JR |
1 x | PC-21 PILATUS Electric retract system |
1 x | MB339 Mini 1.45m White/Orange ARF +elec.L.Gear + 3 Microser |
1 x | Fully Threaded Steel Rod Duralumin 130 mm M3 (2 pcs) |
1 x | White gelcoat 1 Kg |
1 x | resin-hardener package L-385 with hardener H-385 (875 g) |
1 x | Epoxy Resin HT 2 + Hardener HT 2 (60 min) 1 kg |
1 x | Epoxy Resin L (2.5 Kg) |
1 x | Hardener Aero EPH 161 (250 g) |
1 x | Hardener P-25, canister 2.5Kg |
1 x | Epoxy Resin L 285 + Hardener 386, kit/ 1.35 kg |
1 x | Hardener Aero EPH 161 (500 g) |
1 x | Epoxy Resin L 285 + Hardener 386, kit/ 675g |
1 x | Epoxy Resin L 285 + Hardener 285 (Aero), kit/ 1 kg |
1 x | Rangefinder 20x49 mm (2 pcs) |
1 x | MicroMatch PowerBox |
1 x | F-16 Scale 1:6 (1.630mm) |
1 x | ASPIRE Red ARF 2.000 mm, Front Fuselage |
1 x | ASPIRE Blue ARF 2.000 mm |
1 x | ASPIRE Red ARF 2.000 mm, Canopy |
1 x | ASPIRE Red ARF 2.000 mm, Set Elevators |
1 x | ASPIRE Red ARF 2.000 mm |
2 x | Propeller 8x4,3 SlowFlyer |
2 x | Reductora IPS dual-motor 10,7:1 with spinner |
1 x | Z type of cable coupler Ø 1.8 (2 uds) |
1 x | Futaba BLS152 - Upper Case |
1 x | Futaba BLS255/272/471SV - Gear Set |
1 x | Servo FUTABA BLS 276SV |
2 x | Propeller 11x4,7 SlowFlyer |
1 x | Servo FUTABA S 9670 SV |
2 x | Cooler motor type 400 |
1 x | Propeller 10x4,7 SlowFlyer |
1 x | Reductora IPS 150 DX2BB-DXCS 9,7:1 |
1 x | Futaba 3010 - Gear Set |
1 x | Cooler motor type 150 |
1 x | SERVO S9177SV HV S-Bus2 Programable |
1 x | Programador FUTABA USB CIU-3 |
1 x | Servo FUTABA BLS175 SV |
1 x | Propeller 8x4 Electric |
1 x | 45 mm gas motor standoff |
1 x | Futaba S9650/9670SV - Upper Case |
1 x | Servo FUTABA S 3072 HV S-Bus |
1 x | Threaded coupler ALU M3 Ø 4 (2 uds) |
1 x | Horn with ball 55x40 |
1 x | Long adjustable control horn 3x34 |
1 x | Battery LiPo TATTU 2000 mAh 3S 11,1V 100C |
1 x | Electric Fuel Pump 12v |
1 x | Battery LiPo TATTU 1800 mAh 4S 14.8V 75C |
1 x | Lipo GENS Soaring 4000 mAh 3s 11.1v 30C |
1 x | Lipo GENS Soaring 3300 mAh 3S 11.1v 30C |
1 x | Battery LiPo TATTU 1550 mAh 3S 11,1V 75C |
2 x | Intairco CMB Super Filter - 4mm Barb |
1 x | Deposito SECRAFT V2 1000 ml Gas |
2 x | Savox Brushless Servo SB-2271SG |
2 x | Hopper UAT Sebar 400 ml |
2 x | Fuel tank grommet |
3 x | Fuel line plug Small 2 pcs |
2 x | Fuel Station 30L |
1 x | HOPPER tank INTAIRCO iTrap 30 PRO 3x FESTO 4mm |
3 x | Fuel line plugs (Red) |
3 x | ITRAP 40 (95ML) CLASSIC PRO, FESTO 4MM QS ELBOW CONNECTIONS |
2 x | FESTO connector M7 Quick 6 mm |
1 x | FESTO connector M7 Quick 6mm 90º |
2 x | Tube mounting clips (5 pcs) |
1 x | Glass fabric 160 g/m² (Twill weave) 100 cm x 20m |
1 x | Motor B50-14 S |
1 x | Foam plastic plates (310x210x8 mm) |
1 x | Turbine LYNX 130 |
1 x | Head core bushing |
1 x | Blade holder lower |
1 x | Cierva C30 Elevator |
1 x | OS GT15 W/E-4040 for airplane |
1 x | Blade holder upper |
1 x | LA500 freewheel bearing |
1 x | Breatex™ Non-woven absorber 150 g/m² Roll 100m |
1 x | Variable Flow Smoke Pump System |
1 x | Electric starter BEE (old) |
1 x | Autogyro Cierva C30 Spain |
1 x | LA500 Autogyro |
1 x | LA500 cyclic central part |
1 x | 54 mm Futaba servo arm tandem with ball link |
1 x | Futaba 50/60 mm servo pull-pull double arm with ball link |
1 x | Hitec 52 mm servo arm |
1 x | Futaba 76/92 mm servo pull-pull double arm with ball link HUB Al |
1 x | Sandwich carbon + poplar 2mm + carbon 480x290 mm |
1 x | Aluminium Hub for folding Props 55 mm M8 Shaft 6 mm |
1 x | Fibra de vidrio 80 g/m² (10 m x 100 cm) |
1 x | Battery LiFe TopFuel 3100 mAh 3s MTAG 30C |
1 x | Glass fabric 80 g/m² (silane, twill) 100 cm x 10m |
1 x | Esc X-30-Pro BEC |
1 x | Fiberglass 25 g/m² 5000x1270 mm |
1 x | Esc X-40-SB-Pro |
1 x | Fibra de vidrio 80 g/m² (3 m x 100 cm) |
1 x | Motor UMS Radial-5-125cc gas |
1 x | Glass fibre sleeve Ø 20 mm X 10m |
1 x | Straightened rod Ø 6.0 mm x 1000 mm |
1 x | FESTO Filter 4 mm |
1 x | Fuel station 20L incl. pump electric |
2 x | Hopper 125 ml XICOY |
1 x | Servo SAVOX SV-1273 TG |
1 x | Fuel Fittings-Blue |
1 x | Servo SAVOX SV-1270 TG |
1 x | FESTO connector M7 barb fitting XL Tygon |
1 x | Fuel Dot (RED) |
2 x | Fuel line plugs (Silver) |
1 x | Fuel line plug Large 2 pcs |
1 x | Servo SAVOX SA-128S SG |
2 x | Tube holder |
1 x | HOPPER tank INTAIRCO iTrap 60 250ml 3x racor 6mm CLASSIC PRO |
1 x | Tygon tube 7.94 x 4.7 mm 15 m |
1 x | Fuel Fittings-Red |
2 x | Fuel line plugs (Black) |
1 x | Fuel dot V3 (Silver) |
1 x | FESTO Polyurethan tube for turbine 6x4x1000 mm (transparent) |
1 x | Tubo silicona transparente 3.5 x 2 mm (1m) |
2 x | Refueling Cap V3 (RED) |
1 x | Piñones SAVOX SH-0350 |
1 x | Tube mounting clamps |
1 x | 18m Fitting barb |
1 x | Gas combustible tube |
1 x | Kerosene valve EVO Jet |
1 x | EXTREME FLIGHT BLUE MAGNETIC ROUND FILLER PLUG |
1 x | Savox Brushless Servo SC-1267 SG |
1 x | Fuel dot V3 (Red) |
2 x | Bob airtrap set |
1 x | Servo SAVOX SV-1261 MG |
1 x | Fuel Dot (Black) |
2 x | Fuel line plugs (Blue) |
1 x | FuelTank Cap (blue) |
1 x | Quick hose connector 4-4 mm |
1 x | FESTO connector M7 Quick 4 mm |
1 x | Compact on-board starting system (9715) |
1 x | Motor B40-10 L |
1 x | Head spacer |
1 x | LA500 housing-upper cyclic |
1 x | Vertical mounting servo holder |
2 x | Deposito DUBRO 360 ml - 12 oz |
1 x | Horizontal mounting servo holder |
1 x | Prop Holder AXI 41xx V2 |
1 x | Oracover GREY Seafire Sea 2m |
1 x | EXTRA NG 74" white/red/blue (Skywing RC) |
1 x | Conexion PREMIUM MAXI fuselaje/alas 200 cm one4one |
1 x | Glass fabric 49 g/m² (Finish FE 800, plain) 110 cm x 1m |
1 x | Esc MasterSPIN 66 Pro |
1 x | Battery LiFe TopFuel 3100 mAh 2s MTAG 30C |
1 x | Esc X-75-OPTO-Pro |
1 x | Fibra vidrio 25g 110 cm/ 20m (Interglass 02034, finish FE800 pl |
1 x | Glass fibre braided sleeve (45mm) roll 10m |
1 x | Birch plywood plate 600x300x2.0 mm |
1 x | Mahogany wood slat 3.0x3.0x1000 mm |
2 x | Refueling Cup V2 Red |
1 x | Servoarm SH-81, two sides, aluminium |
1 x | Servo SAVOX SA-1258 TG |
1 x | SAVOX SH 0254 servo |
1 x | Simple take for fuel tank |
1 x | TYGON tubo 15 m Diam. 3.4 x 2.0 mm |
1 x | Hose stopper 4 mm |
1 x | Fuel dot blue |
1 x | Precission dot for SAITO FA65/72/80/91S/100/120S/150S/180 |
1 x | Tygon tube 4.8 x 3.2 mm 15 m |
1 x | 280 cc gasoline fuel tank complet |
2 x | Savox Brushless Servo SC-1251 MG |
1 x | HOPPER tank INTAIRCO iTrap 40 95 ml 3x racor 6mm CLASSIC PRO |
1 x | Refueling Cup V2 Blue |
1 x | HOPPER tank INTAIRCO iTrap 30 PRO 3x FESTO 4mm 90º |
1 x | Refueling kit for Cap "Red" |
1 x | SAVOX SH 1250 MG servo digi |
1 x | Servo SAVOX SV-1254 MG HiVolt Low Profile |
1 x | Hopper UAT Sebar 600 ml |
1 x | Fueling valve "Air" |
1 x | Tygon DUBRO Medium 15m |
1 x | Motor A40-14 L 14-Pole V4 |
1 x | Planetary Gear 3,7:1incl. mountingadapter, pinion |
1 x | Q80-13S 20-Pole F3A |
1 x | Blades 330mm |
1 x | Grub screw M3x3 shouldered (2 pcs) |
1 x | Sandwich carbon + poplar 3mm + carbon 290x160 mm |
|
286,182.10EUR |