1 x | 200m servo "Premium" wire (white/red/blue) |
1 x | Protective Cover for wires Ø 20 mm 1000 mm |
1 x | Round Rod 1,0x1000 mm |
1 x | ABS tube 7.0x6.0x1000 mm |
1 x | Carbon fibre tube -TAPERED- 3k-PW (10 x 5 x 0.3) x 880 mm |
1 x | Switch Cap L (silver) |
1 x | ABS I Strip 10x5x1000 mm |
1 x | ABS Strip 1.5x8.0x1000 mm |
1 x | Switch moment button, 2 functions, long FUTABA |
2 x | Tape GFK 25 mm |
1 x | SWTU2 switch |
1 x | Adap/Exten for Futaba 12-14C |
1 x | ABS angle 5,0x5,0x1000 mm |
1 x | ABS Strip 1.5x2.0x1000 mm |
1 x | Decorative caps, multicoloured, short |
1 x | Charger HITEC CG-42 TX 7.2v/ RX 4.8v (80 mA) |
1 x | 6 mm Quick clamp_S (10 pcs) |
1 x | Tape GFK 38 mm |
1 x | 13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
1 x | ABS Strip 1.0x5.0x1000 mm |
1 x | Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs) |
1 x | Cable set PREMIUM Maxi, SUB-Done 4three fuselage/wing 200 cm |
1 x | Profile ABS half cane 6.0x1000 mm |
1 x | Charger FUTABA SQN30W12P-08 220v |
1 x | ABS tube 9.0x7.0x1000 mm |
1 x | Black spiral protective cover for wires Ø 0,5/50 mm - 25 m |
1 x | ABS angle 3,0x3,0x1000 mm |
1 x | Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm) |
1 x | Green silicone 0,25 mm² wire (25 m) |
1 x | Teacher-student connector T12FG/FX-30 |
1 x | 1 m servo "Premium" wire (white/red/blue) |
1 x | ABS tube 5.0x4.0x1000 mm |
1 x | Antenna holder bracket double |
1 x | Cable servo PREMIUM MAXI 200m (blanco/rojo/azul) PVC |
2 x | Antenna Hole Cap V1 (Silver) |
1 x | ABS tube 2.0x1.0x1000 mm |
1 x | Aluminium tube (L 1000 mm, Ø5.0 mm, Ø4.1 mm) |
1 x | ABS Strip 1.0x2.0x1000 mm |
1 x | Futaba S-Bus Rx/Gyro Link Lead |
1 x | 50m servo "Premium" wire (white/red/blue) |
1 x | Switch Cap L (Red) |
1 x | |
1 x | Cable servo PREMIUM MAXI 10m (blanco/rojo/azul) PVC |
1 x | Profile ABS half cane 2.0x1000 mm |
1 x | ABS angle 2,0x2,0x1000 mm |
1 x | ABS tube 5.0x4.0x156 mm |
2 x | SE Ring HACKER 300 mm (2 pcs) |
1 x | Fiberglass heat shield Ø 8 mm 1000 mm |
1 x | Antenna FUTABA 2.4GHz 3PM/8FG/14SG/18SZ/18M |
1 x | Green silicone 0,25 qmm wire (50 m) |
1 x | Ferrita 14x8x5.5 mm |
1 x | Strip 1,5x1,5x330 mm |
1 x | Decorative caps, multicoloured |
1 x | Potenciometro micro |
1 x | Neck strap Double V2 |
1 x | Bec MR UBEC 5A (5v/6v/7v) |
1 x | BALSA trip 6.0x6.0x1000 mm |
2 x | Ball link duraluminium M3 V1 (10 pcs) |
1 x | 41x5,5 mm wires output (2 pcs) |
1 x | 100 mm rods set for direction control |
1 x | Aluminium coupler M2,5/2 with ball bearing (1 pcs) |
1 x | Futaba 32MZ 2.4GHz + R7108SB |
1 x | Brass control horn M4 long for wire (4 pcs) |
1 x | DUPLEX 2.4EX MAlti (Rev.2) |
1 x | Cable with accesories |
1 x | Extension S-Bus 1-2 silicon 120 cm FUTABA |
1 x | Horn mando long (2 pcs) |
2 x | Ball link Aluminio M3 (6 uds) 27x11.9x5.9 mm |
1 x | Clevis plastico I=45 mm / hole 3mm / pin 1 (2 pcs) |
1 x | Extension 15 cm (Futaba) |
1 x | Adapter lead MPX/EC3 |
1 x | A/C quality beech plywood 600x300x5.0 mm |
1 x | Futaba Multi-Switch-Prop 12+2 DECODER |
1 x | Cable grommet Ø 3.2 mm (4 uds) |
1 x | Cable S.BUS 3 salidas 100 mm |
1 x | DUPLEX 2.4EX MSpeed PITOT <300 Km/h |
1 x | Cable coupler M2 (10 uds) |
1 x | FUTABA 6L + R3106 2.4GHz |
1 x | Aluminium M2x12 mm screw (4 pcs) |
2 x | Adjustable launching hook |
1 x | Cabel "Y" 30 cm (graupner) |
1 x | Digital Air Speed Sensor And Pitot Tube Set |
1 x | DUPLEX 2.4EX Central Box 210 |
1 x | Connector CAN 15 |
2 x | Stickers-digit for marking |
1 x | CC 01 |
1 x | A/C quality beech plywood 600x300x1.5 mm |
1 x | Fully Threaded Steel Rod M2,5 (2 uds) |
1 x | Duplex 2.4EX tray transmitter DC-16 II Black multimode |
1 x | Anodized alum. M4x0,7x20 mm Flat Head screw (4 lilac pcs) |
1 x | Cable silicona macho batt. receptor 30 cm (Graupner) |
1 x | Aluminium wide washer M3 blue (4 pcs) |
1 x | Big-Malibu XL Roof box with surfboard rack GREY |
2 x | 3.2 mm Prop Adapter M8 |
2 x | 2 mm Prop Adapter M6 |
2 x | 16x10 tree blades propeller Master Airscrew |
1 x | Propeller 8x4,3 SlowFlyer |
2 x | Reductora IPS 150 DX2BB-DXCS 9,7:1 |
1 x | Cooler motor type 280 |
1 x | Reductora IPS dual-motor 10,7:1 with spinner |
2 x | Retract undercarriage |
1 x | Reductora IPS 150 DX2BB-FXCS 11,8:1 |
1 x | Propeller 3x2 |
1 x | Cooler motor type 400 |
2 x | Propeller 11x4,7 SlowFlyer |
1 x | Cooler motor type 300 |
1 x | Propeller 8x4 Electric |
1 x | Propeller 9x7 SlowFlyer |
1 x | Reductora IPS 150 DX2BB-BXCS 7:1 |
1 x | Propeller 3x3 |
1 x | Transmitter Stick Ends V1 Red - M3 (2 pcs) |
1 x | Transmitter Stick Ends V4 Blue- M3 (2 pcs) |
1 x | TX-Tray V1 (L) (Black) |
1 x | Transmitter Stick Ends V5 Red - M4 JR/DX7 |
1 x | PITTS CHALLENGER 87″ 2.20m (120cc) 03 ARF |
1 x | 20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
1 x | SE Ring 400 mm (2 pcs) |
1 x | Kontronik ProgUnit |
1 x | Jeti Advance Plus Program Card |
1 x | Ball link Aluminio M3 x 3 x 5 x 18mm (6 uds) |
1 x | Threaded coupler ALU M2,5 Ø 3 (2 uds) |
1 x | Cable tie mounts 4.3 (4 uds) |
1 x | Kwik link AL M3 L:23 mm (2 pcs) + Pin Ø 1,6 mm |
1 x | Tapping Screw M2.9x9.5 (10 pcs) |
1 x | DUPLEX R14 receiver 2,4GHz |
1 x | EnLink 2RS Plus - DUO |
1 x | Titanium M3x0,5x8 mm Flat Head screw (4 pcs) |
1 x | BALSA trip 4.0x4.0x1000 mm |
1 x | Pine wood slat 6.0x6.0x1000 mm |
1 x | COPILOT Multiplex |
1 x | Sebart 2.2 m YELLOW/BLACK (SebART) |
1 x | EXTRA 330 LX 2.34m ARF (LX-09) Pilot |
1 x | Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs) |
1 x | SLICK 103" Red/Yellow/Black ARF (Color 2) 2630 mm |
1 x | SE Ring 360 mm (2 pcs) |
1 x | 800TVL CMOS camera for FPV |
1 x | 14x60 mm Mini rings Tie Wraps (4 pcs) |
1 x | 20x200 mm battery rings |
1 x | SE Ring 200 mm (2 pcs) |
1 x | EXTRA NG 74" yello/blue/red (Skywing RC) |
1 x | SkyMaxx 1.550 mm (kit) |
1 x | Jeti Advance Pro Program Card |
1 x | Tarjeta programadora RAY G2 |
1 x | Aluminun wheel collar 4 mm Ø (4 uds) |
1 x | Pulley brass 5/1,5 (2 pcs) |
1 x | Fully Threaded Steel Rod Duralumin 120 mm M3 (2 pcs) |
1 x | Threaded coupler ALU M2 Ø 4 (2 uds) |
1 x | Kwik link with arm M5xM2,5xL30 |
1 x | Aluminium red ball links M3 V1 (10 pcs) |
1 x | Pulley brass 12/2 (2 pcs) |
1 x | Pulley brass 6/1,5 (2 pcs) |
1 x | Angled clevis with threaded rod M3 |
1 x | Cockpit plastic closing |
1 x | Aluminun wheel collar 6 mm Ø (4 uds) |
1 x | Brass ball links BS M3 V1 (10 pcs) |
1 x | Threaded coupler Micro M2 Ø 0,8 (10 pcs) |
1 x | Cable grommet Ø 4 mm (4 uds) |
1 x | Ball link Aluminio M4 x 4 x 6 x 26mm (4 uds) |
1 x | Ball link V1 Ø7 M4/3 (6 uds) |
1 x | Cierre cabina aluminio Ø5, I=16 mm |
1 x | Aluminun wheel collar 5 mm Ø (4 uds) |
1 x | Fully Threaded Steel Rod alumin 60 mm M3 (2 pcs) knurled |
1 x | Kwik link AL M3 L:30 mm (2 pcs) + Pin Ø 1,6 mm |
1 x | Aluminun wheel collar 2.5 mm Ø (4 uds) |
1 x | Cable coupler M2,5 (2 pcs) |
1 x | 140 mm rods + T patellas set for direction control |
1 x | 90 mm rods + T patellas set for direction control |
1 x | Kwik link AL Ø2 mm L:23 mm (2 pcs) + Pin Ø 1,6 mm |
2 x | Jeti Black cap |
1 x | Clevis plastico I=26 mm / hole 2mm / pin 1 (2 pcs) |
1 x | Kwik link AL M3 L:30 mm (2 pcs) + Pin Ø 2,0 mm |
1 x | Fully Threaded Steel Rod Duralumin 130 mm M3 (2 pcs) |
1 x | Fully Threaded Steel Rod Duralumin 60 mm M3 (2 pcs) |
1 x | Threaded coupler ALU M3 Ø 5 (2 uds) |
1 x | Aluminun wheel collar 2 mm Ø (4 uds) |
1 x | Cable coupler M2 (10 uds) |
1 x | Pulley brass 2,5/1 (2 pcs) |
1 x | Cabin latch Fox MDM1 4m (pair) |
1 x | Cockpit latch closing I=10 mm |
1 x | Spring pin Ø 1 x 6 mm (10 pcs) |
1 x | Socket Head Screw M2x5 |
1 x | Screw M4x30 (10 pcs) |
2 x | 10x7 tree blades propeller |
1 x | 11x7 tree blades propeller |
2 x | 15x7 tree blades propeller |
1 x | 25,0 mm 3-BL M4 hydro-propeller (rigth hydropropeller) |
1 x | 14 mm Portholes for screws (10 pcs) |
1 x | 3,2 mm Prop Adapter M6 |
1 x | 3 mm Leader (L 100 mm) |
1 x | 28 mm turnbuckle |
1 x | 29,0 mm propeller (rigth propeller) |
1 x | 290 mm 8x4 M4 shaft ship |
1 x | Grasa 2 ml |
1 x | Pulley brass 2,5/1 (2 pcs) |
1 x | Liston HAYA 10 x 10 x 1000 mm |
1 x | Battery voltage telemetry |
1 x | Screw M3x16 (10 pcs) |
1 x | ESC MEZON 120 Lite |
1 x | Spring lock washer 2.1 mm (20 pcs) |
1 x | Tapping Screw M2.2x13 (10 pcs) |
1 x | Pine wood slat 5.0x5.0x1000 mm |
1 x | Emisora JETI Duplex DS-16 II Carbon Line YELLOW |
1 x | OSD Telemetry sensor |
1 x | Spring lock washer 3.1 mm (20 pcs) |
1 x | Threaded insert M3 (4 pcs) |
1 x | Pine wood slat 2.0x10.0x1000 mm |
1 x | Pine wood slat 3.0x7.0x1000 mm |
1 x | Tapping Screw M2.2x65 (10 pcs) |
1 x | Screw M2.5x10 (10 pcs) |
1 x | Tow hook for tug |
1 x | Screw M3x12 (10 pcs) |
1 x | Tapping Screw M2.9x13 (10 pcs) |
1 x | Screw KB 1.4x6 mm (10 pcs) |
1 x | 33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs) |
1 x | 2,3 mm Prop Adapter M6 |
1 x | 10 mm Prop Adapter M12 |
1 x | 3.17 mm Prop Adapter CN-Spinner |
1 x | 31,0 mm propeller (rigth propeller) |
1 x | 12 mm mast holder |
1 x | 250 mm / 16 mm Airbrakes |
1 x | 3 mm Prop Adapter M6 |
1 x | 15x7 tree blades propeller LEFT |
1 x | 14 mm portholes (10 pcs) |
1 x | 1000 ml sealer (DOPE) |
1 x | 290 mm M4/4 mm Prop shaft |
1 x | 2.3 mm Adapter for 30 mm spinners |
1 x | 10 mm portholes (10 pcs) |
1 x | 3.2 mm Prop Adapter M6 |
1 x | 12x8 tree blades propeller |
1 x | Gearbox KPG27/28 4,7:1pinion |
2 x | Epoxy 40 min (Hardener). 1 Kg |
2 x | Epoxy 5 min. 500 g (Hardener) |
1 x | Epoxy adhesivo Elan-tech ADH 981.892 50ml (dark grey) |
1 x | Epoxy Resin L + Hardener L (40 min) 240g (200g Resin L + 40g Har |
1 x | 50 mm servo arm with bearing (2 pcs) |
1 x | Retract undercarriage for gliders up to 2 Kg |
2 x | Retract undercarriage for gliders 12-25 Kg 2-2.8 (without wheel) |
1 x | Glider retract undercarriage 8-16 Kg 2.5-3.2(without wheel) 140m |
1 x | Set freno para ruedas Dia. 127 mm |
1 x | Metal ring front FEMA |
1 x | Tailwheel for 20/60 size |
1 x | Gear set HITEC HS205/225MG/5245MG/7245MH |
1 x | Foam plastic plates (310x210x3 mm) |
1 x | Servo HITEC D-955 TW Titanium |
1 x | DPSI Micro SingleBat 5.9V/7.2V magnetic switch |
1 x | Propeller 9x4,7 SlowFlyer |
1 x | Epoxy Resin L + Hardener LT kit/ 895g |
1 x | Epoxy Resin HT 2 + Hardener HT 2, kit/ 296 g |
1 x | Epoxy 10 min 190g |
1 x | Mixing tube for double syringes and cartridges (MR 1:1 and 2:1) |
1 x | Epoxy 40 min (Hardener). 10Kg |
1 x | Epoxy L 40 min. (1 Kg) 715g Resina / 285g Hardener S (15 min) |
1 x | Epoxy 5 min. 200g |
1 x | Sprung retractable undercarriage (Alfa model) |
1 x | 160 mm carbon undercarriage (2pcs) |
2 x | Retract undercarriage for gliders 3-7 Kg 3.8-4.3 (without wheel) |
2 x | White aluminium 230 mm landing gear |
1 x | Legs + electric brakes for Viper Jet 90 |
1 x | 40,0 mm hydro-propeller (left hydropropeller) |
1 x | Servo Robbe FS 525 BB MG HV |
1 x | Servo HITEC HS-45 HB, servo box |
1 x | 40 mm 1/4" Race propeller (rigth hydropropeller) |
1 x | SERVO DES 707 BB MG, Pignons |
1 x | Servo GO-1073MGW 32 kg.cm 0.135s/60º |
1 x | Servo TOPMODEL STANDARD S3217 |
1 x | DPSI RV Mini 5 (2008) |
1 x | Propeller hub spacer 8/5.5 |
1 x | Epoxy Casting Resin + Hardener "water-clear" (300 min) |
1 x | Epoxy Resin L + Hardener LT kit/ 3125g |
1 x | Epoxy L 40 min. 10 kg (Resin) |
1 x | Foaming agent for epoxy resins 200 g |
1 x | Epoxy Resin L + Hardener L (40 min) 3.5 Kg (2.5 kg Resin L + 1 k |
1 x | Epoxy 40 min (Resin). 25Kg |
1 x | Fully Threaded Steel Rod alumin 60 mm M3 (2 pcs) |
1 x | Epoxy Resin L + Hardener GL 1 (30 min) |
1 x | Screw M2.5x5 (10 pcs) |
1 x | 40 mm servo arm with bearing (2 pcs) |
2 x | Glider retract undercarriage 8-16 Kg 2.5-3.2(140 mm wheel with b |
1 x | PowerPack 2.5X2 PRO |
1 x | Legs + electric brakes for Viper Jet 1700 mm |
1 x | Tail gear set (60-120 class) |
1 x | Tail wheel for 8-12 kg models |
1 x | Tailwheel for 40/90 size |
1 x | Fiberglass landing gear for 140-160 |
1 x | Nose leg 155 mm with wheels 70 mm |
1 x | 120 mm leg for retract undercarriage with rotation sistem (1 pcs |
1 x | Axle wheel with accesories |
1 x | Glider retract undercarriage 8-16 Kg 2.5-3.2(127 mm wheel) |
1 x | SU 29S 140 carbon landing gear |
1 x | Tailwheel for 60/120 size |
1 x | Set montaje amortiguador para modelos 8-16 Kg |
1 x | FEMA DEFLECTOR LEVER FOR WHEEL BRAKE, |
1 x | Bearing block for noseleg landing gear |
1 x | Tren de cola carbono 50-70cc |
1 x | 28 mm tailwheel unit |
|
21,779.27EUR |