1 x | Big-Malibu XL Roof box with surfboard rack GREY |
1 x | 1/4 Pilot "Mike" |
1 x | 1/12 Pilot "Cougar" |
1 x | Piloto jet 130 mm |
1 x | Pilot JAN 1/4 Saiplanes |
1 x | Pilot "Dick" Legends Series (Slimline) |
1 x | Pilot "Duke" Legends Series (Slimline) |
1 x | Civilian pilot "Pamela" size 9cm (Slimline) |
1 x | 1/6 Pilot "Buddy" |
1 x | Pilot "Anthony" (Slimline) |
1 x | Civilian pilot "Gramps" size 9cm (Slimline) |
1 x | Piloto WWII USAAF 12" Scale 1/6 - 1/5 |
1 x | Civilian pilot "Curt" size 9cm (Slimline) |
1 x | 1/12 Pilot "Tom" |
2 x | 1/4 Pilot "Heidi" |
1 x | 1/10 Pilot "Jimmy" |
2 x | L cockpit anchor "tipe F3A" (2 pcs) |
1 x | Cabin latch Fox MDM1 4m (pair) |
3 x | Crimping sleeves for cable 0.70 mm (10 pcs) |
1 x | Stainless steel cable Ø 0.52 mm - 15 kp (10 m) |
1 x | Micro screw-lock pushrod conn snap Ø 1 mm (2 uds) |
1 x | One touch canopy lock |
1 x | Screw-lock connector M2 (2 uds) |
2 x | Crimping sleeves for cable 0.85 mm (10 pcs) |
1 x | SUS wire 3m (nylon coated) |
2 x | Canopy Latch |
1 x | Stainless steel cable Ø 0.62 mm (10 m) |
3 x | Locking cable tie 4.6x203 (uds) |
1 x | Stainless steel cable Ø 0.88 mm - 60 kp (10 m) |
1 x | Locking cable tie 2.5x100 (uds) |
1 x | Carbon tube (L 1000 mm, Ø10 mm, Ø8 mm) |
1 x | ABS tube 16.0x14.0x1000 mm |
1 x | Aluminium tube (L 1000 mm, Ø3.0 mm, Ø2.1 mm) |
1 x | Balsa panel 8.0x100x1000 mm |
2 x | A/C quality beech plywood 600x300x0.6 mm |
1 x | ABS tube 3.0x1.0x1000 mm |
1 x | A/C quality beech plywood 600x300x0.8 mm |
2 x | ABS tube 5.0x4.0x1000 mm |
1 x | ABS tube 6.0x4.0x1000 mm |
1 x | ABS tube 14.0x10.0x1000 mm |
1 x | ABS tube 4.0x3.0x1000 mm |
1 x | ABS tube 5.0x4.0x156 mm |
1 x | Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm) |
2 x | A/C quality beech plywood BIRCH 600x300x1.0 mm |
1 x | ABS tube 2.0x1.0x1000 mm |
1 x | A/C quality beech plywood 600x300x8.0 mm |
2 x | Beech dowels 2.0 x 1000 mm |
1 x | A/C quality beech plywood 600x300x5.0 mm |
1 x | Carbon tube (L 1000 mm, Ø1.5 mm, Ø0.7 mm) |
1 x | A/C quality beech plywood 1520x750x3.0 mm |
1 x | ABS tube 6.0x5.0x1000 mm |
1 x | PPM Encoder Module |
1 x | Tube Pitot to PIXHAWK |
1 x | Digital Air Speed Sensor And Pitot Tube Set |
1 x | Towing hook |
1 x | A/C quality beech plywood 600x300x6.0 mm |
1 x | Streamline Stainless Steel Tubing 12.3x7.7x1000 mm |
1 x | Carbon fiber rod 6.0 mmx1000 mm |
1 x | Threaded coupler ALU Left M2,5 Ø 4 (2 uds) |
1 x | Threaded coupler ALU Left M2,5 Ø 3 (2 uds) |
1 x | Adapter 5,0 mm M8 |
3 x | Support pump Xicoy X45 |
4 x | Aro pasacable Ø25 mm (4 pcs) |
1 x | Fishing boat Jule Fischkutter |
1 x | Piloto Jet "Red" 1/6 Scale |
1 x | Teacher-student connector T12FG/FX-30 |
2 x | Futaba Radio Case |
2 x | Transmitter Balancer SPK DX-8 |
2 x | Cierre cabina aluminio Ø4, I=10 mm |
1 x | Cockpit plastic closing |
1 x | Fully Threaded Steel Rod alumin 90 mm M3 (2 pcs) knurled |
2 x | Allen wheel collar M4x4 |
1 x | Landing gear frontal support 25x32x16 |
1 x | Stainless steel cable Ø 0.5 mm (2 m) |
1 x | Fully Threaded Steel Rod alumin 90 mm M3 (2 pcs) |
1 x | 90 mm rods + T patellas set for direction control |
2 x | Pushrod greyline 3/2 with coupler M3 L: 1000 mm |
1 x | Wheel collar 5 mm Ø (4 uds) |
1 x | Aluminun wheel collar 4 mm Ø (4 uds) |
2 x | Stainless steel cable Ø 0.5 mm (10 m) |
1 x | 28x5 mm wires output (2 pcs) |
1 x | Fully Threaded Steel Rod Duralumin 120 mm M3 (2 pcs) |
1 x | 100 mm rods set for direction control |
2 x | Horizontal cockpit anchor "tipe F3A" (2 pcs) |
2 x | Aluminium alloy coupler for carbon tube 6/M4 |
1 x | Fully Threaded Steel Rod SUS303 65 mm M3 (2 pcs) |
1 x | Fully Threaded Steel Rod alumin 70 mm M3 (2 pcs) knurled |
1 x | Fully Threaded Steel Rod M2,0 (2 uds) 250mm |
2 x | Fully Threaded Steel Rod alumin 50 mm M3 (2 pcs) |
1 x | Aluminun wheel collar 5 mm Ø (4 uds) |
1 x | Screw-lock pushrod conn snap Ø 1.5 mm (2 uds) |
1 x | Canopy Lock V1 M3 Red (2 pcs) |
2 x | 38x4,5 mm wires output (2 pcs) |
1 x | Fully Threaded Steel Rod alumin 100 mm M3 (2 pcs) |
1 x | Fully Threaded Steel Rod alumin 40 mm M3 (2 pcs) |
1 x | Fully Threaded Steel Rod alumin 80 mm M3 (2 pcs) |
1 x | Clip mini fixing for wing (2 pcs) |
1 x | Fully Threaded Steel Rod Duralumin 70 mm M3 (2 pcs) |
1 x | Cable grommet 9.5 mm (4 uds) |
1 x | Tip wing protector 40x14 (2 pcs) |
1 x | Fully Threaded Steel Rod Duralumin 90 mm M3 (2 pcs) |
1 x | Pushrod greyline 4/3 with coupler M3 |
1 x | Steering arm 12 mm Ø 4 mm |
1 x | 250 mm / 16 mm Airbrakes |
1 x | Tip wing protector 28x10x12 (2 pcs) |
1 x | Pine wood slat 2.0x2.0x1000 mm |
2 x | Linden wood slat 3.0x3.0x1000 mm |
1 x | Liston HAYA 8 x 8 x 1000 mm |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø19 mm, Ø15 mm) |
1 x | Carbon/kevlar tube 3K-PW (L 1500 mm, Ø25 mm, Ø22.5 mm) |
1 x | Pine wood slat 10x10x1000 mm |
1 x | Carbon tube 3K-PW (L 2000 mm, Ø12 mm, Ø10 mm) |
1 x | Pine wood slat 3.0x10.0x1000 mm |
1 x | BALSA trip 6.0x6.0x1000 mm |
1 x | BALSA triangular 6x6x1000 mm |
1 x | Mahogany wood slat 1.5x1.5x1000 mm |
1 x | BALSA trip 8.0x8.0x1000 mm |
1 x | Pine wood slat 3.0x7.0x1000 mm |
1 x | Walnut wood slat 2.0x2.0x1000 mm |
1 x | Carbon tube 3k-LW (L 2000 mm, Ø30 mm, Ø28 mm) |
1 x | Trailing edge BALSA 35x8x1000 mm |
1 x | BALSA trip 5.0x5.0x1000 mm |
1 x | Pine wood slat 3.0x5.0x1000 mm |
1 x | Mahogany wood slat 2.0x2.0x1000 mm |
1 x | UHU Por 50ml/40g |
1 x | Carbon tube (L 1000 mm, Ø5 mm, Ø3 mm) |
1 x | BALSA trip 3.0x5.0x1000 mm |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø25 mm, Ø22.5 mm) |
1 x | Carbon tube (L 1000 mm, Ø6 mm, Ø4 mm) |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø22 mm, Ø20 mm) |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø8 mm, Ø6 mm) |
1 x | BALSA trip 2.0x10.0x1000 mm |
3 x | Sun Cover ULTIMATUM 2.0 (Hispano Aviacion) |
3 x | Support conector MPX (6 pcs) |
1 x | Aluminium cap bolt washer M3 black (8 pcs) |
1 x | Rudder 2_Tray 3~3.5 inch |
2 x | Sun Cover BULL Mo1 2.6 (Hispano Aviacion) |
3 x | Sun Cover PC 21 XXL (JMB Jets) |
2 x | Support Flush MPX Conector (6 pcs) |
1 x | Aro pasacable Ø20 mm (4 pcs) |
2 x | Support Pitot JETI |
2 x | Angle support XT60 conector |
2 x | Support Filtro FESTO |
2 x | Support pumb/filter Xicoy X45 |
1 x | Support FUEL DOT V3 |
1 x | Support XT60 conector (2 pcs) |
1 x | Pasacables rectangular 40x15 mm (4 pcs) |
3 x | Soporte filtro FESTO (4 pcs) |
1 x | Support Antena 2.4 Ghz (2 pcs) |
2 x | Threaded coupler Micro M2 Ø 0,8 (10 pcs) |
1 x | M3-M4 rubber washer (8 pcs) |
1 x | Aluminium wide washer M3 blue (4 pcs) |
1 x | Marker ties (20 pcs) |
1 x | Red aluminium servo arm V1-Futaba 1,0" inch M2 |
1 x | Red aluminium servo arm V1-Futaba 23 mm M2 |
1 x | Aluminium red ball links M3 V1 (10 pcs) |
1 x | Red aluminium servo arm V1-Futaba 17 mm M2 |
1 x | Aluminium cap bolt washer M4 green (8 pcs) |
1 x | Blue aluminium servo arm V1-Hitec 20 mm M2 |
1 x | Futaba Prop Module F14 |
1 x | Red aluminium servo arm V1-Futaba 1,5" inch M3 |
1 x | DUPLEX 2,4EX Brackets for Transmitter DC/DS |
1 x | RC Power Switch 5A |
1 x | Futaba S-Bus Rx/Gyro Link Lead |
1 x | Switch Cap L (Blue) |
1 x | Switch Cap L (silver) |
1 x | Transmitter Balancer Futaba V |
1 x | Adap/Exten for Futaba 12-14C |
1 x | Charger HITEC CG-42 TX 7.2v/ RX 4.8v (80 mA) |
1 x | Contest-S-Pult-Carbon mc-20/mc-24 |
1 x | Tray for FUTABA 18 SZ |
1 x | Decorative caps, multicoloured |
1 x | Neck strap Double V2 |
1 x | Antenna FUTABA 2.4GHz 3PM/8FG/14SG/18SZ/18M |
1 x | Interruptor FUTABA FX-MZ (2 Posic. corto) |
1 x | FUTABA T10 J T-FHSS |
1 x | Futaba FX36 2.4GHz FASST Test + R7008SB |
1 x | AIRSPEED SENSOR SBS01TAS |
1 x | Futaba 32MZ 2.4GHz + R7108SB |
1 x | Battery FUTABA Li-Fe 2100 mAh 6.6v 4PLS/4PX/8J/10J/14SG/18SZ |
1 x | Lipo GENS 2300 6.6v 2s1p Li-Fe Pack emisora |
1 x | FUTABA 32MZ TRANSMITTER + R7108SB RECEIVER |
1 x | Futaba T6K-V2 8Ch 2.4 GHz T-FHSS Air |
1 x | Slider Extenion for CORE |
1 x | DUPLEX 2,4EX Switch SAFETY 2-Position Safety DC-16/14 |
1 x | PPM to Jack link - Tx Black (mono) DC/DS Tx DUPLEX 2,4EX |
1 x | MZ-10, 5 Channel HoTT |
1 x | Harness for transmitter JETI DUPLEX |
1 x | Transmitter Stick Ends JETI DS-16/14 |
1 x | DUPLEX 2,4EX Stick with Potentiometer for Transmitter DC/DS |
1 x | Aluminium tube with fibreglass case ø35x1.5mm, 500mm |
1 x | Albatros ,spare fuselage (Top Model) |
1 x | Vertical cockpit anchor "tipe F3A" (2 pcs) |
1 x | Steering arm 16 mm Ø 3 mm (2 uds) |
1 x | Pegamento Pu R 50g polyuretano |
1 x | Thinwall Stainless Steel Tubing 28x0.6x1000 mm |
1 x | A/C quality beech plywood 1520x750x4.0 mm |
1 x | EDGE 540-A 74" (1880 mm) |
1 x | SLICK 360-A 104" (2640 mm) |
1 x | Futaba Aero Large Case - Internal Foam |
1 x | Battery FUTABA 18MZ |
1 x | Transmitter Balancer Futaba T-10CG |
1 x | Charger FUTABA SQN30W12P-08 220v |
1 x | Switch moment button, 2 functions, long FUTABA |
1 x | Tray FUTABA T6K,T10J,T12K,T14SG,T16iZ,T18SZ,T18MZ,T32MZ |
1 x | Futaba Neckstrap |
1 x | Futaba S-Bus Rx/Gyro Link Lead |
1 x | Maleta transporte FUTABA 10PX |
1 x | Switch Cap L (black) |
1 x | Transmitter Balancer Futaba FF9-DX7-JR-Hitec |
1 x | TX-Tray V1 (L) (Black) |
1 x | Switch Cap M (blue) |
1 x | Transmitter Balancer HITEC Aurora 9, JR and Spectrum (blue) |
1 x | TX-Tray V1 (L) (Red) |
1 x | Switch Cap M (red) |
1 x | Switch Cap L (Red) |
1 x | Tray for FUTABA 14SG/16SZ |
1 x | MULTIPLEX ALUMINUM CASE "M-LINK" |
1 x | Fully Threaded Steel Rod alumin 60 mm M3 (2 pcs) |
1 x | Fully Threaded Steel Rod Duralumin 100 mm M3 (2 pcs) |
1 x | BULLIT Wing 840 mm |
1 x | Hard aluminium thin-walled tube with fibreglass case ø30x1mm, 1m |
1 x | Split pin 1.6x16 mm (10 uds) |
1 x | Split pin 1x8 mm (10 uds) |
1 x | Fully Threaded Steel Rod alumin 30 mm M3 (2 pcs) |
1 x | Electric spoiler 250 mm (2 pcs) |
1 x | Ring support P-20 OPUS V-Jet 60mm |
1 x | Split M1,2x10 (10 pcs) |
1 x | Crimping sleeves for cable 1.3 mm (10 pcs) |
1 x | Avia spare fouselage CF reinforced (Top Model) |
1 x | Fully Threaded Steel Rod alumin 40 mm M2,5 (2 pcs) |
1 x | Avia spare blue cockpit (Top Model) |
1 x | Glass Bubbles (0,12 g) 350 ml |
1 x | CF tube (L 1000 mm Ø0,7 mm, Ø0,3 mm) |
1 x | Steel tube (L 1000 mm Ø7 mm, Ø6,7 mm) |
1 x | Heat-conducting adhesive (2x2ml), WLK DK 4 |
1 x | ABS tube 9.0x8.0x1000 mm |
1 x | MZ-12, 6 Channel HoTT |
1 x | Glow Plug Clip 1.3 Ah |
1 x | Canopy Sweet / Siesta |
1 x | BALSA trip 3.0x3.0x1000 mm |
1 x | Balsa panel 1.0x100x1000 mm |
1 x | BALSA triangular 15x15x1000 mm |
1 x | Birch plywood plate 600x300x2.0 mm |
1 x | Sukhoi 29S 2,6 m,CF landing gear(SebART) |
1 x | ULTRA STICK 10 cc ARF |
1 x | EDGE 540 1.73m SEAGULL Model |
1 x | ULTRA STICK 30 cc ARF |
1 x | Sebart 2.2 m YELLOW/BLACK (SebART) |
1 x | PITTS CHALLENGER 87″ 2.20m (120cc) 03 ARF |
1 x | ARS 300 91" ARF 2311mm ORANGE |
1 x | SLICK 103" Red/Yellow/Black ARF (Color 2) 2630 mm |
1 x | Adapter 3,2 mm M6 |
1 x | Soporte grifo FESTO vertical (1 pcs) |
2 x | Recessed MPX connector support (6 pcs) |
1 x | ABS tube 7.0x5.0x1000 mm |
1 x | Suncover 100cc Red |
1 x | Soporte grifo FESTO (2 pcs) |
1 x | Tube support Ø 6mm (10 pcs) |
|
24,517.54EUR |