3 x | 5 mm M2 variable inclined horn |
1 x | Duralumium F3A horn 30x10x23,5 mm (2 pcs) |
2 x | Brass control horn M4 short for wire (10pcs) |
2 x | Adjustable brass horn threaded M3 |
1 x | Horn 6/27 with M3 Bearing |
1 x | Horn 5/10 with M2 Bearing |
2 x | Cable control set |
1 x | Horn 5/20 with M2 Bearing |
1 x | Horn 6/35 with M3 Bearing |
1 x | Brass control horn M2 long for wire (10pcs) |
1 x | Horn 5/15 with M2 Bearing |
1 x | 5 mm M2 variable horn |
2 x | Control horn long w/ball |
2 x | 6 mm blue aluminium threaded horn with patella |
1 x | Fully Threaded Steel Rod M2,5 (2 uds) |
4 x | Horn mando small (2 pcs) |
1 x | Horn 16,5x20 mm (2 pcs) |
2 x | Horn F3A de Titanium 16 mm (2 units) |
1 x | Horn 6/20 with M3 Bearing |
2 x | Brass control horn M4 long for wire (4 pcs) |
2 x | Horn for flap control (1 pcs) |
1 x | Horn mando long (2 pcs) |
2 x | Wing-connector: Glass / Carbon tube (13.7/12.5) x 1000 mm |
1 x | Aluminum Bayonet / strongal D12 mm / 0.5 m |
1 x | Wing-connector: Glass / Carbon tube (26.5/25 x 25/23) x 1000 mm |
3 x | Aluminum Bayonet / strongal D25 mm / 1 m |
2 x | Hard aluminium thin-walled tube with fibreglass case ø30x1mm, 1m |
1 x | Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 6 mm |
2 x | ABS tube 5.0x4.0x1000 mm |
1 x | ABS tube 3.0x1.0x1000 mm |
1 x | Extra long horn 60x30 |
1 x | Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 5 mm |
2 x | ABS tube 3.0x2.0x1000 mm |
2 x | Horn DUBRO 1/2A |
1 x | Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch 5 m |
1 x | Rudder forward 70x28 "type Kato" |
2 x | Indoor hinge with servo arm integraded |
1 x | ABS tube 9.0x8.0x1000 mm |
1 x | Steel tube (L 1000 mm Ø10 mm, Ø9,7 mm) |
2 x | Aluminium tube (L 1000 mm, Ø3.0 mm, Ø2.1 mm) |
1 x | ABS tube 8.0x6.0x1000 mm |
3 x | ABS tube 4.0x2.0x1000 mm |
1 x | Sistema LDS - Ø12 mmr servos Ø 6/25 spline 60º (Futaba) pitch 6 |
1 x | Carbon tube (L 1000 mm, Ø1.5 mm, Ø0.7 mm) |
2 x | Horns indoor |
1 x | Set Threaded coupler ALU M2,5 Ø 4 (2 uds) |
3 x | Steel tube (L 1000 mm Ø5 mm, Ø4,7 mm) |
1 x | Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 4 mm |
1 x | Rudder forward 90x28 "type Kato" |
2 x | Thinwall Stainless Steel Tubing 28x0.6x1000 mm |
1 x | Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch |
1 x | ABS tube 10.0x8.0x1000 mm |
1 x | ABS tube 9.0x7.0x1000 mm |
1 x | Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch 7 m |
1 x | Steel tube (L 1000 mm Ø9 mm, Ø8,7 mm) |
1 x | ABS tube 12.0x10.0x1000 mm |
1 x | ABS tube 8.0x7.0x1000 mm |
1 x | ABS tube 16.0x14.0x1000 mm |
3 x | ABS tube 7.0x6.0x1000 mm |
1 x | Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 4 mm |
1 x | Micro control horn T2 Ø 1 |
1 x | Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 7 mm |
1 x | Horn DU-BRO 1/2 (2 pcs) |
1 x | Long extra-strong control horn with bearing 2,8x34 |
1 x | ABS tube 3.0x2.0x330 mm |
1 x | Medium extra-strong control horn with bearing 2,8x24 |
1 x | Long horn 50x26 |
2 x | ABS tube 5.0x3.0x1000 mm |
1 x | Cable servo PREMIUM MAXI 50m (blanco/rojo/azul) PVC |
1 x | PVC 0,08 qmm Graupner servos wire (5 m) |
1 x | Optical RPM Sensor |
1 x | Digital precision scale up to 2000 g |
2 x | White silicone 0,25 mm² wire (25 m) |
2 x | 3,0x60 mm allen screwdriver |
1 x | DYNAMOMETER S-1580 |
2 x | White silicone 0,25 qmm wire (150 m) |
1 x | 2,0x50 mm allen screwdriver |
1 x | 2,5x60 mm allen screwdriver |
1 x | Silicone 0,25 qmm servos wire Graupner (100 m) |
1 x | Black silicone 0,25 mm² wire (25 m) |
2 x | Vacuum Connection VA 1 (for hose Ø 6 mm) |
1 x | 1,5x50 mm allen screwdriver |
1 x | Ball Link Plier |
2 x | Starter EM Gear Power 80 |
1 x | PROXXON - SANDING BELTS FOR BSL 220/E 180 GRIT (5 pcs) |
1 x | Cable servo PREMIUM MAXI 100m (blanco/rojo/azul) PVC |
1 x | White silicone 0,25 qmm wire (100 m) |
2 x | Dust collector for mould cleaning |
1 x | Z Bender - S Type Tool |
1 x | Vacuum pump 12 CFM |
1 x | Silicone red 0,25 mm² wire (25 m) |
1 x | 50m servo "Premium" wire (white/red/blue) |
1 x | 100m servo "Premium" wire (white/red/blue) |
1 x | PROXXON - SILICON CARBIDE BELTS FOR BSL 220/E |
1 x | PVC 0,14 qmm servos wire Graupner (100 m) |
2 x | Silicone 0,14 qmm servos wire Graupner (5 m) |
1 x | PVC 0,35 qmm servos wire Graupner (100 m) |
1 x | PVC 0,25 qmm 4 line servos wire JR/Graupner (5 m) |
1 x | Hot Glue Stick BLACK |
1 x | Screwdriver for Torx® TX6 |
1 x | PVC 0,14 qmm servo wire Futaba (5 m) |
1 x | PVC 0,08 qmm Futaba servos wire (5 m) |
1 x | Cable servo PREMIUM MAXI 200m (blanco/rojo/azul) PVC |
2 x | Z Bender - S Type Tool |
1 x | Vacuum pump P1-N |
1 x | Starter Sullivan-STAR 603 DINATRON |
1 x | Starter EM Gear Power 250 |
1 x | JR silicone servo wire 0,35 qmm / 5m |
1 x | Nitroverdu 500 ml |
1 x | Z type of cable coupler Ø 1.8 (2 uds) |
1 x | Extension silicon 35 cm male (Futaba) |
1 x | Trailing edge BALSA 35x8x1000 mm |
1 x | BALSA trip 4.0x4.0x1000 mm |
1 x | Brass control horn M2 large for wire (2pcs) |
1 x | Set cintas unión paracaídas 145 cm |
1 x | ABS angle 2,0x2,0x1000 mm |
1 x | Threaded coupler ALU M2 Ø 3 (2 uds) |
1 x | Brass control horn M4 short for wire (4 pcs) |
2 x | Support pumb/filter Xicoy X45 |
1 x | Motor OS 3820-1200 electric |
1 x | Small adjustable aluminium control horn with bearing 2,8x15 |
2 x | Steel tube (L 1000 mm Ø7 mm, Ø6,7 mm) |
1 x | Aluminium tube (L 1000 mm, Ø4.0 mm, Ø3.1 mm) |
2 x | 3 mm Short Prop Adapter M5 |
1 x | |
1 x | Copier 2x20 cm pcs |
1 x | Screwdriver for Hexagon 1,5mm |
1 x | Cut tube |
1 x | Yellow silicone 0,5 qmm wire (50 m) |
1 x | Rubber Insert hard, 1 Pcs. |
1 x | Adapter 3,2 mm M5 for spinner 30 mm fixed propeller |
1 x | Tester LiPo/LiIon/LiMn/LiFe |
1 x | Aluminium coupler M2/2 with ball bearing (1 pcs) |
1 x | Aluminun wheel collar 2 mm Ø (4 uds) |
1 x | Adapter 3,0 mm M8 |
2 x | Hitec 30 mm servo rounded arm |
1 x | Carbon tube 3K-PW (L 2000 mm, Ø14 mm, Ø12 mm) |
1 x | Carbon plate 350x150x3.0 mm |
1 x | Hard brass tubing (L 1000 mm, Ø8.0 mm, Ø7.1 m) |
2 x | Threaded coupler ALU M3 Ø 4 (2 uds) |
2 x | Carbon tube 3K-PW (L 1000 mm, Ø18 mm, Ø16 mm) |
1 x | Sparkplug Saito 400 |
1 x | Carbon tube 3K-PW (L 2000 mm, Ø12 mm, Ø10 mm) |
1 x | Compact Pitts Muffler OS MAX.35.40 FP |
3 x | Carbon tube 3K-PW (L 1000 mm, Ø40 mm, Ø36 mm) |
2 x | Carbon/kevlar tube 3K-PW (L 1500 mm, Ø25 mm, Ø22.5 mm) |
1 x | 550 cc gasoline fuel tank complet |
1 x | 280 cc gasoline fuel tank complet |
2 x | Carbon tube 3k-LW (L 2000 mm, Ø30 mm, Ø26 mm) |
1 x | Quick hose connector 3-3 mm |
1 x | FESTO connector M5 Quick 4 mm |
1 x | Gates hinge |
1 x | Support 45% Hopper JetsMunt |
1 x | Spark motor OS nº 3 |
1 x | Futaba 50/60 mm servo pull-pull double arm with ball link |
1 x | Fixed launching hook |
2 x | Vertical mounting servo holder |
1 x | ABS tube 6.0x4.0x1000 mm |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø8 mm, Ø6 mm) |
1 x | Fuel tank 500ml (17oz) |
1 x | T-Hose connector 4-4-4mm |
1 x | Sparkplug 1/4-32 EVO 10GX |
1 x | Hitec 25 mm servo arm with ball link |
2 x | Threaded coupler ALU Left M3 Ø 4 (2 uds) |
1 x | Aluminium tube (L 1000 mm, Ø5.0 mm, Ø4.1 mm) |
2 x | Steel tube (L 1000 mm Ø8 mm, Ø7,7 mm) |
2 x | Futaba 20 mm servo arm |
1 x | ABS tube 18.0x16.0x1000 mm |
1 x | Hard brass tubing (L 1000 mm, Ø10.0 mm, Ø9.1 mm) |
1 x | Fiberglass tube 6/4x1000mm |
1 x | Sparkplug ROSSI R8 |
1 x | Hard brass tubing (L 1000 mm, Ø8.0 mm, Ø6.1 m) |
1 x | CF tube (L 1000 mm Ø0,7 mm, Ø0,3 mm) |
1 x | ABS tube 20.0x18.0x1000 mm |
1 x | 500 ccm complete gasoline fuel tank |
1 x | FESTO connector M7 barb fitting 4mm |
1 x | Hard brass tubing (L 1000 mm, Ø2.0 mm, Ø1.2 mm) |
1 x | XTorque CFK Servohebel 38 HITEC 25T |
1 x | FESTO connector M5 Quick 6 mm |
1 x | Quick hose connector 4-4 mm |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø30 mm, Ø27 mm) |
1 x | ABS tube 2.0x1.0x1000 mm |
1 x | Carbon tube (L 1000 mm, Ø14 mm, Ø12 mm) |
1 x | Carbon tube 3K-Matt (L 1000 mm, Ø25 mm, Ø23 mm) |
1 x | Indoor landing gear set |
1 x | Propeller POWER-PROP 7x7 |
1 x | 160 mm carbon undercarriage (2pcs) |
1 x | Silicone black 2,5 qmm wire ( 1 m) |
1 x | Fresa corte diamante Ø 2.3mm (bola) |
1 x | Glider retract undercarriage 8-16 Kg 2.5-3.2(without wheel) 140m |
1 x | XH 30 cm Female extension 0,25 mm2 silicone cable for 3 cell |
1 x | Hot Glue Stick GREEN |
2 x | Vinyl Gloves IDEAL LIGHT, size M , box/ 100 pcs |
1 x | Silicone black 6,0 qmm wire (25 m) |
1 x | PROXXON - TRIANGLE / DELTA SANDING MACHINE OZI/E |
1 x | Crimping tool |
2 x | Tool for entel |
1 x | Heli blades angle measurer |
1 x | 100g Flux Paste for Silver Solder |
1 x | Silicone red 1,5 qmm wire ( 25 m) |
1 x | Starter 12v (Max 180 and 30ccm) |
1 x | Silicone red 1,5 qmm wire ( 1 m) |
1 x | Aramid fibre shears Proton®, 21 cm / 8" length |
1 x | Handle for PERMAGRIT lime |
1 x | Towing hook |
2 x | Support Pitot JETI |
2 x | Tube support Ø 6mm (10 pcs) |
1 x | Soporte filtro FESTO (4 pcs) |
2 x | Angle support XT60 conector |
1 x | Soporte grifo FESTO (2 pcs) |
2 x | Support conector MPX (6 pcs) |
1 x | Support Antena 2.4 Ghz (2 pcs) |
1 x | Support ECU Xicoy X-45 |
1 x | Recessed MPX connector support (6 pcs) |
1 x | Tapa estado carga XT-60 (6 pcs) |
1 x | Support Filtro FESTO |
2 x | Aro pasacable Ø20 mm (4 pcs) |
1 x | Pasacables rectangular 40x15 mm (4 pcs) |
1 x | Support pump Xicoy X45 |
2 x | Soporte grifo FESTO vertical (1 pcs) |
1 x | Carbon plate 350x150x1.0 mm |
1 x | Motor A10-7 L 4,4:1 |
1 x | Disipador para motor Hacker B 20 (or motors up to Ø20 mm) |
1 x | Motor A30-12 L V4 |
1 x | DUPLEX 2.4EX RC Switch |
1 x | Battery LiFe TopFuel 3100 mAh 3s MTAG 30C |
1 x | Ball Bearings for motor A60-V2 |
2 x | 6 mm aluminium horn with patella |
1 x | Threaded coupler ALU Left M2,5 Ø 3 (2 uds) |
1 x | Threaded coupler ALU M2 Ø 4 (2 uds) |
1 x | Propeller diller for DLE111 and DA85-150 |
1 x | Aluminium tube with fibreglass case ø35x1.5mm, 1m |
1 x | Wheel cover holder Ø 6 mm (2 uds) |
1 x | Kwik link aluminio M3 L: 30mm (6 uds) pin Ø 2 mm |
1 x | PROXXON - DRILL SET 0,5-3,2MM (10PCS.) |
1 x | MPX plug mold V1 |
1 x | Hexagonal Nut M3 (10 pcs) |
1 x | Pulley brass 6/1,5 (2 pcs) |
1 x | Axle for motor A50-L |
1 x | A60 Motor Mount Alu complete set |
1 x | Connectors banna oro 8,0 mm 5 pcs(Female) |
1 x | Motor A20-20 L EVO |
1 x | A30-M/L/XL Backmountset complete |
1 x | Motor A30-14 M V2 6 Poles |
1 x | Motor A60-6XS V4 28-pole kv370 |
1 x | Motor A20-6 XL 10-Pole EVO + 4,4:1 |
1 x | Motor A50-10L Turnado V3 Glider |
1 x | Battery LiFe TopFuel 3100 mAh 2s MTAG 30C |
2 x | Axle for motor A20-S (3 uds) |
1 x | Aceite AEROSHELL 500 SE Turbina 0,9 kg |
1 x | EDF Stream-Fan 110mm kv780 |
1 x | Motor A60-7XS V4 28-pole kv330 |
1 x | Aluminium Hub "Z" for folding Props 30 mm M8 Shaft 5 mm |
1 x | A50 Backmountset complete |
1 x | A50 Backmountset complete V3/V4 |
1 x | Axi for motor A40-L Motor 8-Pole-Electric Turbine |
1 x | Motor MVVS 2.0/1120 |
1 x | KingTech K45TP G4 Turboprop |
1 x | Program card KAVAN PRO |
1 x | Battery LiFe -1450/25C-3S 9.9V |
1 x | KingTech Turbineoil 5L |
1 x | Turbine KINGTECH K100 G4 |
1 x | Turbina KINGTECH K55G4 |
1 x | FOD Screen K45/60/70/85 |
1 x | Battery LiFe -2100/25C-3S 9.9V |
1 x | Adapter 3,2 mm M6 for spinner 40 mm fixed propeller |
1 x | Extra-long adjustable aluminium control horn 2,8x34 |
1 x | Adapter 3,2 mm M6 |
1 x | 2 mm Prop Adapter M5 |
1 x | Adapter 3,2 mm M8 |
1 x | Horn with ball 40x30 |
1 x | 2,3 mm Prop Drive Günther M4 |
1 x | Horn micro type4 Ø 0,5 (2 pcs) |
1 x | Couple M4 for wire (10 pcs) |
1 x | Locking cable tie 2.5x100 (uds) |
1 x | Propeller electric carbon 6.5x4 |
1 x | 16x10 tree blades propeller Master Airscrew |
2 x | Hard brass tubing (L 1000 mm, Ø5.0 mm, Ø4.1 mm) |
1 x | Fueling valve "Air" |
1 x | 1000 ccm gasoline fuel tank |
1 x | T-Connector 4.0 mm x 1000 mm |
1 x | U Profile ABS 5,0x10,0x1000 mm |
1 x | Cessna SKYLANE T182 1.75m - Seagull Model |
1 x | Check valve quick hose connector 4-4 mm |
1 x | QS Bulkhead Valve 4/4 mm |
1 x | STD excentric gearbox for 2,3mm axis (3,0:1) |
1 x | Fuel Station 20L |
1 x | Planetary gearbox(3,33:1) |
1 x | Hopper UAT Sebar 600 ml |
1 x | Universal Filter |
1 x | CF tube set (Ø 38 mm y Ø 14 mm) |
1 x | Adapter 2,3 mm M5 for spinner 30 mm fixed propeller |
1 x | Mini Infrared Thermomiter |
1 x | Tapping Screw M2.2x65 (10 pcs) |
1 x | Threaded insert M4 (4 pcs) |
1 x | Hexagonal ball head 2.0 x 50 mm |
1 x | Wheel cover holder Ø 4 mm (2 uds) |
1 x | Wheel collar 5 mm Ø (4 uds) |
1 x | PROXXON - SANDING BELTS FOR BSL 220/E 120 GRIT (5 pcs) |
1 x | Unmounted aluminium pin 6x98 mm (2 pcs) |
1 x | Mold plugs XT-30 |
1 x | Fully Threaded Steel Rod alumin 30 mm M3 (2 pcs) |
1 x | Propeller POWER-PROP 12x8 |
1 x | Propeller electric carbon 10x8 |
1 x | 8x6 tree blades propeller |
1 x | Propeller electric carbon 7x7 |
1 x | Propeller POWER-PROP 13x8 |
1 x | 12x6 tree blades propeller |
1 x | Hitec 25 mm servo arm with M3 ball link |
1 x | 6 mm red aluminium threaded horn with patella |
1 x | Hard brass tubing (L 1000 mm, Ø7.0 mm, Ø6.1 mm) |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø12 mm, Ø8 mm) |
1 x | Refueling kit for Cap "Red" |
1 x | Steel tube (L 1000 mm Ø3 mm, Ø2,7 mm) |
1 x | Hose clips 6 mm |
1 x | EXTREME FLIGHT BLACK MAGNETIC ROUND FILLER PLUG |
1 x | Check valve V2 |
1 x | Refueling Cap V3 Red |
1 x | Hard brass tubing (L 1000 mm, Ø11.0 mm, Ø10.0 mm) |
1 x | Smoke Dot (Red) |
1 x | White smoke bombs AX-9 (10 pcs) |
1 x | Threaded coupler M2,5 Ø 3 mm (10 pcs) |
1 x | Piloto Jet "Green" 1/6 Scale |
1 x | Propeller POWER-PROP 10x6 |
1 x | Propeller RABOESCH M4 30 mm (3 Blades) (Left hydropropeller) |
1 x | EXTREME FLIGHT RED MAGNETIC ROUND FILLER PLUG |
1 x | BOOMERANG II 40/46 ARF 1.55mm |
1 x | double Fuel Dot V2 (silver) |
1 x | SkyMaxx 1.550 mm (kit) |
1 x | 3.2 mm Prop Adapter M8 |
1 x | Propeller RABOESCH M3 50 mm (3 Blades pr) (Left hydropropeller) |
1 x | ABS tube 4.0x3.0x1000 mm |
1 x | Propeller RABOESCH M4 45 mm (3 Blades pr) (Right hydropropeller) |
1 x | Extra hard 750 ccm complete gasoline fuel tank |
1 x | MG cannon 1.8 cm (5 pcs) |
1 x | HOPPER tank INTAIRCO iTrap 30 PRO 3x FESTO 4mm 90º |
1 x | Tank gas KUZA 500 cc |
1 x | Hitec 52 mm servo arm |
1 x | Distanzstück motor OS 120 AX |
1 x | Futaba 25 mm servo arm with ball link |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø22 mm, Ø20 mm) |
1 x | STD excentric gearbox for 2,0mm axis (4,5:1) |
1 x | Simple take for fuel tank |
1 x | Planetary gearbox(3,8:1) |
1 x | Futaba 24/30 mm servo pull-pull double arm with ball link |
1 x | Futaba 25 mm servo arm with M3 ball link |
1 x | Futaba 76/92 mm servo pull-pull double arm with ball link |
1 x | Black "FUEL VENT" round aluminum overflow socket |
1 x | F1 Prop Cap Can (Fuel Container Conection) |
1 x | Horizontal mounting servo holder |
1 x | Gearbox KPG27/28 4,7:1pinion |
1 x | 20 mm carbon horn |
1 x | Set fresas corte acero-carburo Ø 1.8/2.3 mm (2 pcs) |
1 x | Pistola termica MH 550 micro |
1 x | Set brocas Ø 0.4-0.6-0.8-1.0 mm (4 pcs) |
1 x | Tachometer HANGAR 9 digital |
2 x | Electric Landing Gear AVANTI XS (Elektron Retracts) |
2 x | Electron 22 mm Fitting barb |
1 x | Electric Landing Gear ULTIMATUM 2.0 (Elektron Retracts) |
1 x | Towing hook <3m |
1 x | Support FUEL DOT V3 |
1 x | Tool for entel |
1 x | Fabric scissors curved Premium, 16 cm / 6" length |
1 x | Smart Soldering Iron 110W/230V AC |
1 x | 25 mm Sandpaper file |
1 x | |
1 x | Schul-Malpinsel Gr.5 |
1 x | 10-15mm Servo Arm |
1 x | Nose leg 155 mm with wheels 70 mm |
1 x | Electromagnets brake |
1 x | Nose leg 155 mm with wheels 70 mm |
1 x | Ball Link ALU M3 - RH (1 pcs) |
1 x | Electric Landing Gear "Black Edition" BULL Mo1 2.6 (Elektron Re |
1 x | Green silicone 0,25 qmm wire (50 m) |
1 x | Electric Landing Gear ODYSSEY (Elektron Retracts) |
1 x | Electric Landing Gear GS-200 BULL Mo1 2.6 (Elektron Retracts) |
1 x | Electric Landing Gear "Black Edition" ULTIMATUM 3.0 (Elektron Re |
1 x | ER40 Front Leg (with wheel 80mm) |
1 x | Cable servo PREMIUM MAXI 10m (blanco/rojo/azul) PVC |
1 x | Digital weight, angle and balance meter BASIC |
1 x | Electric Landing Gear BULL Mo1 2.6 (Elektron Retracts) |
1 x | Adjustable launching hook |
1 x | SERVO HOLDER |
1 x | Brake disc Electron Retracts |
1 x | Electric Landing Gear PC-21 Skymaster (Elektron Retracts) |
1 x | Electric Landing Gear "Black Edition" ULTIMATUM 2.0 (Elektron Re |
1 x | ER-40eVo Set B [Complet Set + GS200] |
1 x | Actuator Electric 25 mm |
1 x | Electric Landing Gear RS-200 w/o programmer ULTIMATUM 2.0 (Elekt |
1 x | Manual Controller |
1 x | GS-200 Electronic |
1 x | Electric Landing Gear ASPIRE (Elektron Retracts) |
1 x | Electric Landing Gear ULTIMATUM 3.0 (Elektron Re |
|
35,824.97EUR |