1 x | Xplorer2 anemometro |
1 x | Xplorer3 anemometro |
1 x | Xplorer1 anemometro |
1 x | Glases Flitemaster |
1 x | Glases Nimbus "Black" |
1 x | Glases Ace |
1 x | Glases Nimbus |
1 x | Motor A2212/13T |
1 x | Steering arm 12 mm Ø 3 mm (2 uds) |
1 x | Cylidric hinge 33 mm Ø 2 mm (5 pcs) |
2 x | Long pinned hinge (6 uds) |
1 x | Pin type hinge Al 3,0x50 mm (2 pcs) |
1 x | Nylon hinge for flaps 33x9 (2 pcs) |
2 x | Pin type hinge Al 3,0x50 mm demount (2 pcs) |
2 x | Stainless steel cable Ø 0.52 mm - 15 kp (10 m) |
1 x | Stainless steel cable Ø 0.5 mm (2 m) |
2 x | Cierre cabina aluminio Ø5, I=16 mm |
2 x | Cierre cabina aluminio Ø4, I=10 mm |
1 x | Aluminium alloy coupler for carbon tube 6/M4 |
1 x | One touch canopy lock |
2 x | Canopy Lock V1 M3 Blue (2 pcs) |
1 x | Stainless steel cable Ø 0.88 mm - 60 kp (10 m) |
2 x | ABS Strip 1.5x2.0x1000 mm |
1 x | Strip 3,5x1,75x330 mm |
2 x | Round Rod 6,0x1000 mm |
1 x | Round Rod 2,5x1000 mm |
1 x | Round Rod 1,25x1000 mm |
2 x | ABS Strip 1.5x8.0x1000 mm |
2 x | ABS Strip 1.5x6.0x1000 mm |
2 x | Round Rod 3,0x1000 mm |
3 x | ABS Strip 1.0x4.0x1000 mm |
2 x | ABS I Strip 10x5x1000 mm |
1 x | ABS I Strip 20x10x1000 mm |
1 x | Strip ABS 2.0x3.0x1000 mm |
1 x | Strip 2,0x2,0x330 mm |
2 x | Strip ABS 2.0x8.0x1000 mm |
1 x | SE Ring HACKER 300 mm (2 pcs) |
1 x | SE Ring 480 mm (2 pcs) |
1 x | Softshell Hispano Aviación |
1 x | Monokote BLUE metalizado (1.8x0.65m) |
1 x | Hot Glue Stick BLACK |
1 x | Civilian pilot "Gramps" size 9cm (Slimline) |
3 x | Balls 4 mm |
3 x | Head lower part |
1 x | Rotorshape Elevator |
4 x | Wheel keeper washer |
2 x | Blade holder upper |
1 x | Glases Stratus |
1 x | PIX Hawk with accesories |
1 x | PPM Encoder Module |
2 x | Round Rod 1,0x1000 mm |
1 x | Strip ABS 2.0x5.0x1000 mm |
1 x | Support pump Xicoy X45 |
1 x | Soporte filtro FESTO (4 pcs) |
1 x | 5.8G Receiver Helical Antenna with protecting case (SMA plug) 12 |
1 x | Aluminun wheel collar 3.5 mm Ø (4 uds) |
2 x | Aluminun wheel collar 3 mm Ø (4 uds) |
2 x | Cockpit plastic closing |
1 x | Fully Threaded Steel Rod Duralumin 110 mm M3 (2 pcs) |
2 x | Fully Threaded Steel Rod Duralumin 70 mm M3 (2 pcs) |
1 x | Fully Threaded Steel Rod alumin 100 mm M3 (2 pcs) |
1 x | Cable tie mounts 4.3 (4 uds) |
1 x | 28x5 mm wires output (2 pcs) |
1 x | Fully Threaded Steel Rod alumin 90 mm M2,5 (2 pcs) |
1 x | Fully Threaded Steel Rod Duralumin 60 mm M3 (2 pcs) |
2 x | Aluminun wheel collar 4 mm Ø (4 uds) |
3 x | Allen wheel collar M3x3 |
1 x | Allen wheel collar M4x6 |
1 x | Pushrod greyline 3/2 with coupler M3 L: 1000 mm |
2 x | Split M1,2x10 (10 pcs) |
1 x | Fully Threaded Steel Rod SUS303 70mm M3 (2 pcs) |
1 x | Aluminun wheel collar 2.5 mm Ø (4 uds) |
1 x | Fully Threaded Steel Rod alumin 80 mm M3 (2 pcs) |
1 x | 11 mm Rubber pads (14 pcs) |
1 x | Split pin 1.6x16 mm (10 uds) |
1 x | 38x4,5 mm wires output (2 pcs) |
1 x | STEERING FRONT WHEEL SYSTEM BIDULE 111 |
1 x | Landing gear frontal support 29x26x13,5 |
2 x | Aluminun wheel collar 6 mm Ø (4 uds) |
1 x | Wheel collar 4 mm Ø (4 uds) |
1 x | Pin type hinge Al 6x98 mm (2 pcs) |
1 x | 48 mm cylidric hinge Ø 2,5 mm (5 pcs) |
1 x | Straightened rod Ø 1.0 mm x 1000 mm |
1 x | Straightened rod Ø 5.5 mm x 1000 mm |
1 x | 60x25 mm tail wheel "type F3A" |
1 x | Small pinned hinge (12 uds) |
1 x | Wheel FEMA 82 mm / 5 mm |
1 x | DUBRO - 102MM / 4" DIA BIG WHEELS (400RV) - 2PCS |
1 x | Mudguard for 140/165 mm wheels |
3 x | ABS Strip 1.5x3.0x1000 mm |
1 x | 4" - 102 x 45 mm Ø5 mm aluminium core wheel |
1 x | Round Rod 1,5x1000 mm |
1 x | 33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs) |
1 x | 18 mm reinforced hinge |
2 x | |
1 x | Brass hexagonal rod Ø 5 mm x 1000 mm |
1 x | Motor holder for AC 28/7 |
1 x | Radial heatsink for MPJ AC25/35-xx motor |
1 x | Cooler motor type 300 |
1 x | MAMBO 17 |
1 x | Aluminium rod Ø 4.0 mm x 3000 mm |
1 x | Straightened rod Ø 5.0 mm x 1000 mm |
1 x | Brass hexagonal rod Ø 4 mm x 1000 mm |
1 x | Black copper lacquer wire Ø0,2 mm (5 m) |
1 x | BEC 3A FOXY |
2 x | Horn 13,5x16 mm (2 pcs) |
2 x | 6 mm blue aluminium threaded horn with patella |
2 x | Horn 20x28,5 mm (2 pcs) |
2 x | Horn for flap control (1 pcs) |
2 x | Horn mando long (2 pcs) |
2 x | Brass control horn M3 short for wire (2 pcs) |
2 x | Horn 5/10 with M2 Bearing |
1 x | LA500 Autogyro |
2 x | Bearing housing |
1 x | Complet landing gear |
1 x | LA500 pre-rotation gear |
1 x | LA500 housing-lower cyclic |
3 x | Battery plate |
2 x | Bearing 3x6x2,5 |
1 x | ABS Strip 1.5x4.0x1000 mm |
1 x | Wheel FEMA 140 mm / 6 mm |
1 x | Micro flex hinge (12 uds) |
1 x | Wheel FEMA 70 mm / 5 mm |
2 x | 89x32 mm (3.5") axle Ø5 mm aluminium core wheel |
1 x | Pin type hinge Al 4,5x70 mm to wire (2 pcs) |
1 x | Wheel 75 mm with electromagnet and brake disk (2 uds) |
1 x | Wheel 38 mm V2 |
1 x | Gates hinge aluminium (1 pcs) |
1 x | Flap hinge 33x9 mm (6 pcs) |
2 x | Super Light Wheels (Sponge Tyre) Ø 60mm x 19 mm (2pcs) axis Ø 3. |
1 x | Wheel collar 2 mm Ø (4 uds) |
1 x | 67 mm cylidric hinge Ø 5 mm (4 pcs) |
1 x | Wheel 28 mm |
1 x | Large flex hinge (12 uds) |
1 x | Strip 2,5x1,25x330 mm |
2 x | Blades 330mm |
2 x | Washer 2.2×4 |
1 x | Rudder |
4 x | Ball joint long |
3 x | Grub screw M3x3 shouldered (2 pcs) |
2 x | Nut M2 |
3 x | Nut M2 securing |
3 x | Rotorhead pushrod |
1 x | AC-10 pre-rotacion with motor |
2 x | Head core bushing |
2 x | Blade holder center GFK 0,5 mm |
1 x | Steel Screw M1x8 (10 pcs) |
2 x | Side Plate |
1 x | Head core |
1 x | Screws M1,6x6 Allen |
2 x | Head upper part |
3 x | Steering lever |
2 x | Tail boom |
3 x | Raer wall |
2 x | Head spacer |
1 x | Screws flush mount M2 |
3 x | Rotor Mast |
3 x | Head lower part New |
3 x | Baering 3x8x4 |
2 x | Servo Fork |
3 x | Blade holder center |
3 x | Tail support (2 pcs) |
2 x | Screw M3x16 |
2 x | Motor wall |
1 x | 30 cm BEC cable (female) |
1 x | Autogyro Cierva C30 Spain |
1 x | Bluetooth Adapter JET CENTRAL |
1 x | Fod Guard 67x32 mm |
1 x | FOD Screen K140G/K180G/K210G |
1 x | Pendulun "Special" to tank 60g |
1 x | Telemetry JETI |
1 x | Fully Threaded Steel Rod Duralumin 100 mm M3 (2 pcs) |
1 x | Tip wing protector 28x10x12 (2 pcs) |
1 x | Steering arm 12 mm Ø 4 mm (2 uds) |
1 x | AXI 2814/16 V2 Long |
1 x | AXI 2814/12 V2 |
1 x | Stainless steel cable Ø 0.62 mm (10 m) |
1 x | AXI 2826/8 V2 |
1 x | 24x10 BIELA Sport 3Bl propeller (3-blades) |
1 x | AXI 2808/24 V2 Long |
1 x | Motor Mount for TITAN ZG45 and ZG62, length 72 mm |
1 x | 23x10 BIELA propeller (4-blades) Scale |
1 x | Stainless steel cable Ø 0.5 mm (10 m) |
1 x | Motor A30-10 XL V4 |
1 x | Motor A40-10S V4 14-Pole |
1 x | 270 mm 3/3 mm shaft ship |
3 x | Wheel collar 3 mm Ø (4 uds) |
1 x | Propeller RABOESCH M3 50 mm (3 Blades pr) (Right hydropropeller) |
1 x | LA500 rotor head shaft |
1 x | Rudder forward 70x28 "type Kato" |
1 x | Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 4 mm |
1 x | Indoor hinge with servo arm integraded |
1 x | Horn 6/20 with M3 Bearing |
1 x | Brass control horn M2 short for wire (2 pcs) |
1 x | Threaded coupler ALU M3 Ø 4 (2 uds) |
1 x | Threaded coupler ALU M2 Ø 4 (2 uds) |
1 x | Threaded coupler ALU Left M2,5 Ø 4 (2 uds) |
1 x | Brass control horn M4 short for wire (10pcs) |
1 x | Horn DUBRO 1/2A |
1 x | Round flex hinge (12 uds) |
1 x | 76 mm light wheels (2 pcs) |
1 x | 43x14 mm hard foam KOVO wheel (2 pcs) |
1 x | 20x1000 mm Ring Strap Back To Back |
1 x | Servo M2x9/16 screw (4 pcs) |
1 x | Round Rod 4,0x1000 mm |
1 x | Round Rod 5,0x1000 mm |
1 x | Cable grommet Ø 4 mm (4 uds) |
1 x | 41x5,5 mm wires output (2 pcs) |
1 x | Steering arm 16 mm Ø 3 mm (2 uds) |
1 x | Snap for floding prop for 2 mm axi |
1 x | Propeller MENZ-S 20x9 |
1 x | Propeller MENZ-S 20x12 |
1 x | Propeller MASTER AIRSCREW 13x6 |
1 x | Press fitting for 0,5 diam. steel cable (10 pcs) |
2 x | Allen wheel collar M4x4 |
1 x | Steering arm 12 mm Ø 4 mm |
1 x | Propeller POWER-PROP 14x8 |
1 x | Propeller MENZ-S 21x8 3-Blades |
1 x | Cable grommet Ø 6.4 mm (4 uds) |
2 x | Crimping sleeves for cable 0.85 mm (10 pcs) |
1 x | Canopy Latch |
1 x | Propeller MENZ-S 15x8 3 blades |
1 x | Steering arm 16 mm Ø 4 mm |
1 x | Propeller MENZ-S 19x10 |
1 x | Propeller MENZ-S 20x10 |
1 x | Propeller MENZ-S 16x8 |
1 x | Fully Threaded Steel Rod Duralumin 80 mm M3 (2 pcs) |
1 x | Fully Threaded Steel Rod M2,0 (2 uds) 250mm |
1 x | VM 2020/20 rear |
1 x | AXI 2814/20 V2 |
1 x | 26x18 BIELA propeller |
1 x | 22x8 BIELA propeller |
1 x | Wing bolts M3 Steel screw blue (2 pcs) |
1 x | Crimping sleeves for cable 0.70 mm (10 pcs) |
1 x | 5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
1 x | 45 mm rods + T patellas set for direction control |
1 x | 26x12 BIELA 3Bl Pusher propeller |
1 x | 17x10 BIELA propeller SCALE (3-blades) |
1 x | AXI 2826/10 V2 |
1 x | BIELA 19x7 WILGA Propellers |
1 x | Window mounting channel Type H 2.5x0.5 (2 m) |
1 x | AXI 2820/14 V2 Long |
1 x | 22x10 BIELA propeller |
1 x | AXI 2808/20 V2 |
1 x | AXI 2808/16 V2 |
1 x | 18x6 BIELA propeller |
1 x | Motor A60-7XS V4 28-pole kv330 |
1 x | Motor A30-12 L V4 |
1 x | Motor A10-7 L 4,4:1 |
1 x | Backmountset complete A40 |
1 x | A30-M/L/XL Backmountset complete |
1 x | Bearings for motors hacker A50 |
1 x | U Profile ABS 2,0x4,0x1000 mm |
1 x | Rigid coupling brass Ø 4.0 / 2.3 mm L: 20 mm |
1 x | 290 mm 290 mm M5x18 mm shaft ship |
1 x | U Profile ABS 1,0x2,0x1000 mm |
1 x | Rudder 107-06 |
1 x | Indoor Brushed motor kit |
2 x | ABS Strip 1.0x5.0x1000 mm |
1 x | 20x13 Falcon electric carbon prop (64g) |
1 x | 21x14 Falcon electric carbon prop (64 g) |
1 x | Turbo Prop KS |
1 x | Connectors banna gold 5,5 mm (M/F) |
1 x | LH long aluminium horn L31xH30 (2pcs) |
1 x | Horn 6/35 with M3 Bearing |
1 x | Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 4 mm |
1 x | Long extra-strong control horn with bearing 2,8x34 |
1 x | SlowFlyer control horn (3 pcs) |
1 x | Sistema LDS - Ø12 mmr servos Ø 6/25 spline 60º (Futaba) pitch 6 |
1 x | Micro control horn T2 Ø 1 |
1 x | Rudder forward 90x28 "type Kato" |
1 x | Small aluminium horn red (2pcs) |
1 x | Horn with ball 40x30 |
1 x | Fully Threaded Steel Rod Duralumin 50 mm M3 (2 pcs) |
1 x | Cable control set |
1 x | Horn 6/27 with M3 Bearing |
1 x | Horn F3A de Titanium 16 mm (2 units) |
1 x | Threaded coupler ALU Left M3 Ø 4 (2 uds) |
1 x | Horn mando small (2 pcs) |
1 x | Brass control horn M4 short for wire (4 pcs) |
1 x | Micro control horn (2 pcs) |
1 x | Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 5 mm |
1 x | Threaded coupler ALU M2,5 Ø 3 (2 uds) |
1 x | Medium extra-strong control horn with bearing 2,8x24 |
1 x | Threaded coupler ALU Left M2,5 Ø 3 (2 uds) |
1 x | Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 6 mm |
1 x | Horn 5/15 with M2 Bearing |
1 x | Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch 5 m |
1 x | Threaded coupler ALU M2,5 Ø 6 (2 uds) |
1 x | Control horn long w/ball |
1 x | 5 mm M2 variable inclined horn |
1 x | LH long black aluminium horn L31xH30 (2pcs) |
1 x | RH long aluminium horn (2pcs) |
1 x | Set Threaded coupler ALU M2,5 Ø 4 (2 uds) |
1 x | Rudder forward 80x28 "type Kato" |
1 x | Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 5 mm |
1 x | Long horn 50x26 |
1 x | Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch |
1 x | Horn DU-BRO 1/2 (2 pcs) |
1 x | Horn 5/20 with M2 Bearing |
1 x | Threaded coupler ALU M3 Ø 6 (2 uds) |
1 x | Horn micro type4 Ø 0,5 (2 pcs) |
1 x | Fully Threaded Steel Rod M2,5 (2 uds) |
1 x | 6 mm M3 variable inclined horn |
1 x | Brass control horn M4 long for wire (4 pcs) |
1 x | Brass control horn M2 large for wire (2pcs) |
1 x | 5 mm M2 variable horn |
1 x | 6 mm aluminium horn with patella |
1 x | Horn 16,5x20 mm (2 pcs) |
1 x | Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 6 mm |
1 x | Threaded coupler ALU M2,5 Ø 4 (2 uds) |
1 x | Horns indoor |
1 x | Brass control horn M2 long for wire (10pcs) |
1 x | 6 mm M3 variable horn |
1 x | 73x24 mm hard foam KOVO wheel (2 pcs) |
1 x | Propeller POWER-PROP 10x6 |
1 x | FesEx-Uni6 System |
1 x | Propeller 9x4,7 SlowFlyer |
1 x | Propeller electric carbon 9.5x7 |
1 x | Crystal Universal TX 35.140 Ch 74 |
1 x | 45x19 mm hard foam KOVO wheel (2 pcs) |
1 x | Dumper propeller 6/8 mm |
1 x | Small flex hinge (12 uds) |
1 x | Slave-cable USB Easy Sim |
1 x | 63x12 mm foam special light KOVO wheel with radius (2 pcs) |
1 x | 100x50 mm SLH KOVO wheel |
1 x | Propeller 8x4,3 SlowFlyer |
1 x | Crystal Universal RX 35.020 Ch 62 |
1 x | Combo AM480 T-Motor 650 Kv |
1 x | FA27.2×8.9 Prop-2PCS/PAIR |
1 x | Propeller APC 10x3,8 SF Electric Pusher |
1 x | Propeller APC 11x10 Electric |
2 x | Blade holder lower |
1 x | Rotorshape Autogyro |
1 x | Propeller APC 11x6 Glow/Gas |
1 x | Propeller APC 10x4.7 SF |
1 x | Propeller APC 12x6 Electric |
1 x | Propeller APC 10x4.5 MR |
1 x | Propeller APC 10x6 Glow/Gas |
1 x | Propeller APC 11x5 Glow/Gas |
1 x | Propeller APC 11x7 SF |
1 x | Propeller APC 10x4.7 SF Pusher |
1 x | Propeller APC 12x10 Electric |
1 x | Propeller APC 10x3,8 SF |
1 x | Propeller APC 10x6 Electric |
1 x | Nut M1,6 |
|
11,596.40EUR |